FAILED: patch "[PATCH] scsi: pm8001: Setup IRQs on resume" failed to apply to 4.14-stable tree

The patch below does not apply to the 4.14-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-4.14.y
git checkout FETCH_HEAD
git cherry-pick -x c91774818b041ed290df29fb1dc0725be9b12e83
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2023092013-habitable-caring-8e6f@gregkh' --subject-prefix 'PATCH 4.14.y' HEAD^..

Possible dependencies:

c91774818b04 ("scsi: pm8001: Setup IRQs on resume")
653926205741 ("scsi: pm80xx: Do not call scsi_remove_host() in pm8001_alloc()") 1b5d2793283d ("scsi: pm8001: Neaten debug logging macros and uses") 1f889b58716a ("scsi: pm80xx: Fix pm8001_mpi_get_nvmd_resp() race condition") 4a2efd4b89fc ("scsi: pm80xx: Make running_req atomic")
7640e1eb8c5d ("scsi: pm80xx: Make mpi_build_cmd locking consistent") 5a141315ed7c ("scsi: pm80xx: Increase the number of outstanding I/O supported to 1024") 27bc43bd7c42 ("scsi: pm80xx: Remove DMA memory allocation for ccb and device structures") 05c6c029a44d ("scsi: pm80xx: Increase number of supported queues") dba2cc03b9db ("scsi: pm80xx: sysfs attribute for non fatal dump") b40f28820fba ("scsi: pm80xx: Cleanup initialization loading fail path") 9d9c7c20fb35 ("scsi: pm80xx: Free the tag when mpi_set_phy_profile_resp is received") d384be6ede5c ("scsi: pm80xx: Deal with kexec reboots")
58bf14c17e65 ("scsi: pm80xx: Increase request sg length")
20bc1ad2e4da ("scsi: pm80xx: fix spelling mistake "to" -> "too"") 044f59de3a3d ("scsi: pm80xx: Modified the logic to collect fatal dump") 7295493682aa ("scsi: pm80xx: Tie the interrupt name to the module instance") 3e253d9657b0 ("scsi: pm80xx: Do not request 12G sas speeds")
51c1c5f6ed64 ("scsi: pm80xx: Cleanup command when a reset times out") 91a43fa61f10 ("scsi: pm80xx: Fix command issue sizing")

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From c91774818b041ed290df29fb1dc0725be9b12e83 Mon Sep 17 00:00:00 2001
From: Damien Le Moal <[email protected]>
Date: Tue, 12 Sep 2023 08:27:36 +0900
Subject: [PATCH] scsi: pm8001: Setup IRQs on resume

The function pm8001_pci_resume() only calls pm8001_request_irq() without calling pm8001_setup_irq(). This causes the IRQ allocation to fail, which leads all drives being removed from the system.

Fix this issue by integrating the code for pm8001_setup_irq() directly inside pm8001_request_irq() so that MSI-X setup is performed both during normal initialization and resume operations.

index 5e5ce1e74c3b..443a3176c6c0 100644
@@ -273,7 +273,6 @@ static irqreturn_t pm8001_interrupt_handler_intx(int irq, void *dev_id)
 	return ret;
 }
 
-static u32 pm8001_setup_irq(struct pm8001_hba_info *pm8001_ha);
 static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha);
 
 /**

@@ -294,13 +293,6 @@ static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha,
 	pm8001_dbg(pm8001_ha, INIT, "pm8001_alloc: PHY:%x\n",
 		   pm8001_ha->chip->n_phy);
 
-	/* Setup Interrupt */
-	rc = pm8001_setup_irq(pm8001_ha);
-	if (rc) {
-		pm8001_dbg(pm8001_ha, FAIL,
-			   "pm8001_setup_irq failed [ret: %d]\n", rc);
-		goto err_out;
-	}
 	/* Request Interrupt */
 	rc = pm8001_request_irq(pm8001_ha);
 	if (rc)

@@ -1031,47 +1023,38 @@ static u32 pm8001_request_msix(struct pm8001_hba_info *pm8001_ha)
 }
 #endif
 
-static u32 pm8001_setup_irq(struct pm8001_hba_info *pm8001_ha)
-{
-	struct pci_dev *pdev;
-
-	pdev = pm8001_ha->pdev;
-
-#ifdef PM8001_USE_MSIX
-	if (pci_find_capability(pdev, PCI_CAP_ID_MSIX))
-		return pm8001_setup_msix(pm8001_ha);
-	pm8001_dbg(pm8001_ha, INIT, "MSIX not supported!!!\n");
-#endif
-	return 0;
-}
-
 /**
  * pm8001_request_irq - register interrupt
  * @pm8001_ha: our ha struct.
  */
 static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha)
 {
-	struct pci_dev *pdev;
+	struct pci_dev *pdev = pm8001_ha->pdev;
+#ifdef PM8001_USE_MSIX
 	int rc;
 
-	pdev = pm8001_ha->pdev;
+	if (pci_find_capability(pdev, PCI_CAP_ID_MSIX)) {
+		rc = pm8001_setup_msix(pm8001_ha);
+		if (rc) {
+			pm8001_dbg(pm8001_ha, FAIL,
+				   "pm8001_setup_irq failed [ret: %d]\n", rc);
+			return rc;
+		}
 
-#ifdef PM8001_USE_MSIX
-	if (pdev->msix_cap && pci_msi_enabled())
-		return pm8001_request_msix(pm8001_ha);
-	else {
-		pm8001_dbg(pm8001_ha, INIT, "MSIX not supported!!!\n");
-		goto intx;
+		if (pdev->msix_cap && pci_msi_enabled())
+			return pm8001_request_msix(pm8001_ha);
 	}
+
+	pm8001_dbg(pm8001_ha, INIT, "MSIX not supported!!!\n");
 #endif
 
-intx:
 	/* initialize the INT-X interrupt */
 	pm8001_ha->irq_vector[0].irq_id = 0;
 	pm8001_ha->irq_vector[0].drv_inst = pm8001_ha;
-	rc = request_irq(pdev->irq, pm8001_interrupt_handler_intx, IRQF_SHARED,
-		pm8001_ha->name, SHOST_TO_SAS_HA(pm8001_ha->shost));
-	return rc;
+
+	return request_irq(pdev->irq, pm8001_interrupt_handler_intx,
+			   IRQF_SHARED, pm8001_ha->name,
+			   SHOST_TO_SAS_HA(pm8001_ha->shost));
 }
 
 /**