fs/splice: don't block splice_direct_to_actor() after data was read
PATCH 1/1 fs/splice: don't block splice_direct_to_actor() after data was read
If userspace calls sendfile() with a very large "count" parameter, the kernel can block for a very long time until 2 GiB (0x7ffff000 bytes) have been read from the hard disk and pushed into the socket buffer.
Usually, that is not a problem, because the socket write buffer gets filled quickly, and if the socket is non-blocking, the last direct_splice_actor() call will return -EAGAIN, causing splice_direct_to_actor() to break from the loop, and sendfile() will return a partial transfer.
However, if the network happens to be faster than the hard disk, and the socket buffer keeps getting drained between two generic_file_read_iter() calls, the sendfile() system call can keep running for a long time, blocking for disk I/O over and over.
That is undesirable, because it can block the calling process for too long. I discovered a problem where nginx would block for so long that it would drop the HTTP connection because the kernel had just transferred 2 GiB in one call, and the HTTP socket was not writable (EPOLLOUT) for more than 60 seconds, resulting in a timeout:
sendfile(4, 12, [5518919528] => [5884939344], 1813448856) = 366019816 <3.033067> sendfile(4, 12, [5884939344], 1447429040) = -1 EAGAIN (Resource temporarily unavailable) <0.000037> epoll_wait(9, [{EPOLLOUT, {u32=2181955104, u64=140572166585888}}], 512, 60000) = 1 <0.003355> gettimeofday({tv_sec=1667508799, tv_usec=201201}, NULL) = 0 <0.000024>
sendfile(4, 12, [5884939344] => [8032418896], 2147480496) = 2147479552 <10.727970> writev(4, [], 0) = 0 <0.000439>
epoll_wait(9, [], 512, 60000) = 0 <60.060430>
gettimeofday({tv_sec=1667508869, tv_usec=991046}, NULL) = 0 <0.000078>
write(5, "10.40.5.23 - - [03/Nov/2022:21:5"..., 124) = 124 <0.001097>
close(12) = 0 <0.000063>
close(4) = 0 <0.000091>
In newer nginx versions (since 1.21.4), this problem was worked around by defaulting "sendfile_max_chunk" to 2 MiB:
https://github.com/nginx/nginx/commit/5636e7f7b4
Instead of asking userspace to provide an artificial upper limit, I'd like the kernel to block for disk I/O at most once, and then pass back control to userspace.
There is prior art for this kind of behavior in filemap_read():
/* * If we've already successfully copied some data, then we * can no longer safely return -EIOCBQUEUED. Hence mark * an async read NOWAIT at that point. */ if ((iocb->ki_flags & IOCB_WAITQ) && already_read) iocb->ki_flags |= IOCB_NOWAIT;
This modifies the caller-provided "struct kiocb", which has an effect on repeated filemap_read() calls. This effect however vanishes because the "struct kiocb" is not persistent; splice_direct_to_actor() doesn't have one, and each generic_file_splice_read() call initializes a new one, losing the "IOCB_NOWAIT" flag that was injected by filemap_read().
There was no way to make generic_file_splice_read() aware that IOCB_NOWAIT was desired because some data had already been transferred in a previous call:
- checking whether the input file has O_NONBLOCK doesn't work because this should be fixed even if the input file is not non-blocking
- the SPLICE_F_NONBLOCK flag is not appropriate because it affects only whether pipe operations are non-blocking, not whether file/socket operations are non-blocking
Since there are no other parameters, I suggest adding the SPLICE_F_NOWAIT flag, which is similar to SPLICE_F_NONBLOCK, but affects the "non-pipe" file descriptor passed to sendfile() or splice(). It translates to IOCB_NOWAIT for regular files. For now, I have documented the flag to be kernel-internal with a high bit, like io_uring does with SPLICE_F_FD_IN_FIXED, but making this part of the system call ABI may be a good idea as well.
--- fs/splice.c | 14 ++++++++++++++ include/linux/splice.h | 6 ++++++ 2 files changed, 20 insertions(+)
fs/splice.c +14 -0
@@ -361,6 +361,8 @@ ssize_t copy_splice_read(struct file *in, loff_t *ppos,iov_iter_bvec (&to,ITER_DEST , bv, npages, len);init_sync_kiocb (&kiocb, in); kiocb.ki_pos = *ppos; +if (flags &SPLICE_F_NOWAIT ) + kiocb.ki_flags |=IOCB_NOWAIT ; ret =call_read_iter (in, &kiocb, &to);if (ret >0 ) {
@@ -1070,6 +1072,18 @@ ssize_t splice_direct_to_actor(struct file *in, struct splice_desc *sd,if (unlikely (ret <=0 )) goto read_failure; +/* +* After at least one byte was read from the input +* file, don't wait for blocking I/O in the following +* loop iterations; instead of blocking for arbitrary +* amounts of time in the kernel, let userspace decide +* how to proceed. This avoids excessive latency if +* the output is being consumed faster than the input +* file can fill it (e.g. sendfile() from a slow hard +* disk to a fast network). +*/ + flags |=SPLICE_F_NOWAIT ; + read_len = ret; sd->total_len = read_len;
include/linux/splice.h +6 -0
@@ -23,6 +23,12 @@#define SPLICE_F_ALL (SPLICE_F_MOVE|SPLICE_F_NONBLOCK|SPLICE_F_MORE|SPLICE_F_GIFT) +/* +* Don't wait for I/O (internal flag for the splice_direct_to_actor() +* loop). +*/ +#define SPLICE_F_NOWAIT (1U << 30) +/* * Passed to the actors */
Signature · 1 line
2.39.2
Christian Brauner
maintainer[+Cc Jens]
Quoted 136 lines · Max Kellermann
If userspace calls
sendfile()with a very large "count" parameter, the kernel can block for a very long time until 2 GiB (0x7ffff000bytes) have been read from the hard disk and pushed into the socket buffer.Usually, that is not a problem, because the socket write buffer gets filled quickly, and if the socket is non-blocking, the last
direct_splice_actor()call will return-EAGAIN, causingsplice_direct_to_actor()to break from the loop, andsendfile()will return a partial transfer.However, if the network happens to be faster than the hard disk, and the socket buffer keeps getting drained between two
generic_file_read_iter()calls, thesendfile()system call can keep running for a long time, blocking for disk I/O over and over.That is undesirable, because it can block the calling process for too long. I discovered a problem where nginx would block for so long that it would drop the HTTP connection because the kernel had just transferred 2 GiB in one call, and the HTTP socket was not writable (EPOLLOUT) for more than 60 seconds, resulting in a timeout:
sendfile(4, 12, [5518919528] => [5884939344], 1813448856)= 366019816 <3.033067>sendfile(4, 12, [5884939344], 1447429040)= -1 EAGAIN (Resource temporarily unavailable) <0.000037>epoll_wait(9, [{EPOLLOUT, {u32=2181955104, u64=140572166585888}}], 512, 60000)= 1 <0.003355>gettimeofday({tv_sec=1667508799, tv_usec=201201}, NULL)= 0 <0.000024>
sendfile(4, 12, [5884939344] => [8032418896], 2147480496)= 2147479552 <10.727970>writev(4, [], 0)= 0 <0.000439>
epoll_wait(9, [], 512, 60000)= 0 <60.060430>
gettimeofday({tv_sec=1667508869, tv_usec=991046}, NULL)= 0 <0.000078>
write(5, "10.40.5.23 - - [03/Nov/2022:21:5"..., 124)= 124 <0.001097>
close(12) = 0 <0.000063>
close(4) = 0 <0.000091>In newer nginx versions (since 1.21.4), this problem was worked around by defaulting "
sendfile_max_chunk" to 2 MiB:https://github.com/nginx/nginx/commit/5636e7f7b4
Instead of asking userspace to provide an artificial upper limit, I'd like the kernel to block for disk I/O at most once, and then pass back control to userspace.
There is prior art for this kind of behavior in
filemap_read():/* * If we've already successfully copied some data, then we * can no longer safely return -EIOCBQUEUED. Hence mark * an async read NOWAIT at that point. */ if ((iocb->ki_flags & IOCB_WAITQ) && already_read) iocb->ki_flags |= IOCB_NOWAIT;This modifies the caller-provided "struct kiocb", which has an effect on repeated
filemap_read()calls. This effect however vanishes because the "struct kiocb" is not persistent;splice_direct_to_actor()doesn't have one, and eachgeneric_file_splice_read()call initializes a new one, losing the "IOCB_NOWAIT" flag that was injected byfilemap_read().There was no way to make
generic_file_splice_read()aware thatIOCB_NOWAITwas desired because some data had already been transferred in a previous call:- checking whether the input file has
O_NONBLOCKdoesn't work because this should be fixed even if the input file is not non-blocking- the
SPLICE_F_NONBLOCKflag is not appropriate because it affects only whether pipe operations are non-blocking, not whether file/socket operations are non-blockingSince there are no other parameters, I suggest adding the
SPLICE_F_NOWAITflag, which is similar toSPLICE_F_NONBLOCK, but affects the "non-pipe" file descriptor passed tosendfile()orsplice(). It translates toIOCB_NOWAITfor regular files. For now, I have documented the flag to be kernel-internal with a high bit, likeio_uringdoes withSPLICE_F_FD_IN_FIXED, but making this part of the system call ABI may be a good idea as well.Signed-off-by Max Kellermann <[email protected]>--- fs/splice.c | 14 ++++++++++++++ include/linux/splice.h | 6 ++++++ 2 files changed, 20 insertions(+)fs/splice.c +14
-0@@ -361,6 +361,8 @@ ssize_t copy_splice_read(struct file *in, loff_t *ppos,iov_iter_bvec (&to,ITER_DEST , bv, npages, len);init_sync_kiocb (&kiocb, in); kiocb.ki_pos = *ppos; +if (flags &SPLICE_F_NOWAIT ) + kiocb.ki_flags |=IOCB_NOWAIT ; ret =call_read_iter (in, &kiocb, &to);if (ret >0 ) {@@ -1070,6 +1072,18 @@ ssize_t splice_direct_to_actor(struct file *in, struct splice_desc *sd,if (unlikely (ret <=0 )) goto read_failure; +/* +* After at least one byte was read from the input +* file, don't wait for blocking I/O in the following +* loop iterations; instead of blocking for arbitrary +* amounts of time in the kernel, let userspace decide +* how to proceed. This avoids excessive latency if +* the output is being consumed faster than the input +* file can fill it (e.g. sendfile() from a slow hard +* disk to a fast network). +*/ + flags |=SPLICE_F_NOWAIT ; + read_len = ret; sd->total_len = read_len;include/linux/splice.h +6
-0@@ -23,6 +23,12 @@#define SPLICE_F_ALL (SPLICE_F_MOVE|SPLICE_F_NONBLOCK|SPLICE_F_MORE|SPLICE_F_GIFT) +/* +* Don't wait for I/O (internal flag for the splice_direct_to_actor() +* loop). +*/ +#define SPLICE_F_NOWAIT (1U << 30) +/* * Passed to the actors */ Signature · 1 line
2.39.2
Quoted 80 lines · Christian Brauner
[+Cc Jens]
Quoted 77 lines · Max Kellermann
If userspace calls
sendfile()with a very large "count" parameter, the kernel can block for a very long time until 2 GiB (0x7ffff000bytes) have been read from the hard disk and pushed into the socket buffer.Usually, that is not a problem, because the socket write buffer gets filled quickly, and if the socket is non-blocking, the last
direct_splice_actor()call will return-EAGAIN, causingsplice_direct_to_actor()to break from the loop, andsendfile()will return a partial transfer.However, if the network happens to be faster than the hard disk, and the socket buffer keeps getting drained between two
generic_file_read_iter()calls, thesendfile()system call can keep running for a long time, blocking for disk I/O over and over.That is undesirable, because it can block the calling process for too long. I discovered a problem where nginx would block for so long that it would drop the HTTP connection because the kernel had just transferred 2 GiB in one call, and the HTTP socket was not writable (EPOLLOUT) for more than 60 seconds, resulting in a timeout:
sendfile(4, 12, [5518919528] => [5884939344], 1813448856)= 366019816 <3.033067>sendfile(4, 12, [5884939344], 1447429040)= -1 EAGAIN (Resource temporarily unavailable) <0.000037>epoll_wait(9, [{EPOLLOUT, {u32=2181955104, u64=140572166585888}}], 512, 60000)= 1 <0.003355>gettimeofday({tv_sec=1667508799, tv_usec=201201}, NULL)= 0 <0.000024>
sendfile(4, 12, [5884939344] => [8032418896], 2147480496)= 2147479552 <10.727970>writev(4, [], 0)= 0 <0.000439>
epoll_wait(9, [], 512, 60000)= 0 <60.060430>
gettimeofday({tv_sec=1667508869, tv_usec=991046}, NULL)= 0 <0.000078>
write(5, "10.40.5.23 - - [03/Nov/2022:21:5"..., 124)= 124 <0.001097>
close(12) = 0 <0.000063>
close(4) = 0 <0.000091>In newer nginx versions (since 1.21.4), this problem was worked around by defaulting "
sendfile_max_chunk" to 2 MiB:https://github.com/nginx/nginx/commit/5636e7f7b4
Instead of asking userspace to provide an artificial upper limit, I'd like the kernel to block for disk I/O at most once, and then pass back control to userspace.
There is prior art for this kind of behavior in
filemap_read():/* * If we've already successfully copied some data, then we * can no longer safely return -EIOCBQUEUED. Hence mark * an async read NOWAIT at that point. */ if ((iocb->ki_flags & IOCB_WAITQ) && already_read) iocb->ki_flags |= IOCB_NOWAIT;This modifies the caller-provided "struct kiocb", which has an effect on repeated
filemap_read()calls. This effect however vanishes because the "struct kiocb" is not persistent;splice_direct_to_actor()doesn't have one, and eachgeneric_file_splice_read()call initializes a new one, losing the "IOCB_NOWAIT" flag that was injected byfilemap_read().There was no way to make
generic_file_splice_read()aware thatIOCB_NOWAITwas desired because some data had already been transferred in a previous call:- checking whether the input file has
O_NONBLOCKdoesn't work because this should be fixed even if the input file is not non-blocking- the
SPLICE_F_NONBLOCKflag is not appropriate because it affects only whether pipe operations are non-blocking, not whether file/socket operations are non-blockingSince there are no other parameters, I suggest adding the
SPLICE_F_NOWAITflag, which is similar toSPLICE_F_NONBLOCK, but affects the "non-pipe" file descriptor passed tosendfile()orsplice(). It translates toIOCB_NOWAITfor regular files. For now, I have documented the flag to be kernel-internal with a high bit, likeio_uringdoes withSPLICE_F_FD_IN_FIXED, but making this part of the system call ABI may be a good idea as well.
I think adding the flag for this case makes sense, and also exposing it on the UAPI side. My only concern is full coverage of it. We can't really have a SPLICE_F_NOWAIT flag that only applies to some cases.
That said, asking for a 2G splice, and getting a 2G splice no matter how slow it may be, is a bit of a "doctor it hurts when I..." scenario.
Signature · 1 line
Jens Axboe
Quoted 2 lines · Jens Axboe
I think adding the flag for this case makes sense, and also exposing it on the UAPI side.
OK. I suggest we get this patch merged first, and then I prepare a patch for wiring this into uapi, changing SPLICE_F_NOWAIT to 0x10 (the lowest free bit), add it to SPLICE_F_ALL and document it.
(If you prefer to have it all in this initial patch, I can amend and resubmit it with the uapi feature.)
Quoted 2 lines
My only concern is full coverage of it. We can't
really have aSPLICE_F_NOWAITflag that only applies to some cases.
The feature is already part of uapi - via RWF_NOWAIT, which maps to IOCB_NOWAIT, just like my proposed SPLICE_F_NOWAIT flag. The semantics (and the concerns) are the same, aren't they?
Quoted 2 lines
That said, asking for a 2G splice, and getting a 2G splice no matter how slow it may be, is a bit of a "doctor it hurts when I..." scenario.
I understand this argument, but I disagree. Compare recv(socket) with read(regular_file).
A read(regular_file) must block until the given buffer is filled completely (or EOF is reached), which is good for some programs which do not handle partial reads, but other programs might be happy with a partial read and prefer lower latency. There is preadv2(RWF_NOWAIT), but if it returns EAGAIN, userspace cannot know when data will be available, can't epoll() regular files. There's no way that a read() returns at least one byte, but doesn't wait for more (not even with preadv2(), unfortunately).
recv(socket) (or reading on a pipe) behaves differently - it blocks only until at least one byte arrives, and callers must be able to deal with partial reads. That's good for latency - imagine recv() would behave like read(); how much data do you ask the kernel to receive? If it's too little, you need many system calls; if it's too much, your process may block indefinitely.
read(regular_file) behaves that way for historical reasons and we can't change it, only add new APIs like preadv2(); but splice() is a modern API that we can optimize for how we want it to behave - and that is: copy as much as the kernel already has, but don't block after that (in order to avoid huge latencies).
My point is: splice(2G) is a very reasonable thing to do if userspace wants the kernel to transfer as much as possible with a single system call, because there's no way for userspace to know what the best number is, so let's just pass the largest valid value.
Max
Christian Brauner
maintainerQuoted 10 lines · Max Kellermann
Quoted 2 lines · Jens Axboe
I think adding the flag for this case makes sense, and also exposing it on the UAPI side.
OK. I suggest we get this patch merged first, and then I prepare a patch for wiring this into uapi, changing
SPLICE_F_NOWAITto0x10(the lowest free bit), add it toSPLICE_F_ALLand document it.(If you prefer to have it all in this initial patch, I can amend and resubmit it with the uapi feature.)
Please resend it all in one patch. That's easier for all to review.
PATCH v2 1/1 fs/splice: don't block splice_direct_to_actor() after data was read
If userspace calls sendfile() with a very large "count" parameter, the kernel can block for a very long time until 2 GiB (0x7ffff000 bytes) have been read from the hard disk and pushed into the socket buffer.
Usually, that is not a problem, because the socket write buffer gets filled quickly, and if the socket is non-blocking, the last direct_splice_actor() call will return -EAGAIN, causing splice_direct_to_actor() to break from the loop, and sendfile() will return a partial transfer.
However, if the network happens to be faster than the hard disk, and the socket buffer keeps getting drained between two generic_file_read_iter() calls, the sendfile() system call can keep running for a long time, blocking for disk I/O over and over.
That is undesirable, because it can block the calling process for too long. I discovered a problem where nginx would block for so long that it would drop the HTTP connection because the kernel had just transferred 2 GiB in one call, and the HTTP socket was not writable (EPOLLOUT) for more than 60 seconds, resulting in a timeout:
sendfile(4, 12, [5518919528] => [5884939344], 1813448856) = 366019816 <3.033067> sendfile(4, 12, [5884939344], 1447429040) = -1 EAGAIN (Resource temporarily unavailable) <0.000037> epoll_wait(9, [{EPOLLOUT, {u32=2181955104, u64=140572166585888}}], 512, 60000) = 1 <0.003355> gettimeofday({tv_sec=1667508799, tv_usec=201201}, NULL) = 0 <0.000024>
sendfile(4, 12, [5884939344] => [8032418896], 2147480496) = 2147479552 <10.727970> writev(4, [], 0) = 0 <0.000439>
epoll_wait(9, [], 512, 60000) = 0 <60.060430>
gettimeofday({tv_sec=1667508869, tv_usec=991046}, NULL) = 0 <0.000078>
write(5, "10.40.5.23 - - [03/Nov/2022:21:5"..., 124) = 124 <0.001097>
close(12) = 0 <0.000063>
close(4) = 0 <0.000091>
In newer nginx versions (since 1.21.4), this problem was worked around by defaulting "sendfile_max_chunk" to 2 MiB:
https://github.com/nginx/nginx/commit/5636e7f7b4
Instead of asking userspace to provide an artificial upper limit, I'd like the kernel to block for disk I/O at most once, and then pass back control to userspace.
There is prior art for this kind of behavior in filemap_read():
/* * If we've already successfully copied some data, then we * can no longer safely return -EIOCBQUEUED. Hence mark * an async read NOWAIT at that point. */ if ((iocb->ki_flags & IOCB_WAITQ) && already_read) iocb->ki_flags |= IOCB_NOWAIT;
This modifies the caller-provided "struct kiocb", which has an effect on repeated filemap_read() calls. This effect however vanishes because the "struct kiocb" is not persistent; splice_direct_to_actor() doesn't have one, and each generic_file_splice_read() call initializes a new one, losing the "IOCB_NOWAIT" flag that was injected by filemap_read().
There was no way to make generic_file_splice_read() aware that IOCB_NOWAIT was desired because some data had already been transferred in a previous call:
- checking whether the input file has O_NONBLOCK doesn't work because this should be fixed even if the input file is not non-blocking
- the SPLICE_F_NONBLOCK flag is not appropriate because it affects only whether pipe operations are non-blocking, not whether file/socket operations are non-blocking
Since there are no other parameters, I suggest adding the SPLICE_F_NOWAIT flag, which is similar to SPLICE_F_NONBLOCK, but affects the "non-pipe" file descriptor passed to sendfile() or splice(). It translates to IOCB_NOWAIT for regular files, just like RWF_NOWAIT does.
Changes v1 -> v2:
- value of SPLICE_F_NOWAIT changed to 0x10
- added SPLICE_F_NOWAIT to SPLICE_F_ALL to make it part of uapi
--- fs/splice.c | 14 ++++++++++++++ include/linux/splice.h | 4 +++- 2 files changed, 17 insertions(+), 1 deletion(-)
fs/splice.c +14 -0
@@ -361,6 +361,8 @@ ssize_t copy_splice_read(struct file *in, loff_t *ppos,iov_iter_bvec (&to,ITER_DEST , bv, npages, len);init_sync_kiocb (&kiocb, in); kiocb.ki_pos = *ppos; +if (flags &SPLICE_F_NOWAIT ) + kiocb.ki_flags |=IOCB_NOWAIT ; ret =call_read_iter (in, &kiocb, &to);if (ret >0 ) {
@@ -1070,6 +1072,18 @@ ssize_t splice_direct_to_actor(struct file *in, struct splice_desc *sd,if (unlikely (ret <=0 )) goto read_failure; +/* +* After at least one byte was read from the input +* file, don't wait for blocking I/O in the following +* loop iterations; instead of blocking for arbitrary +* amounts of time in the kernel, let userspace decide +* how to proceed. This avoids excessive latency if +* the output is being consumed faster than the input +* file can fill it (e.g. sendfile() from a slow hard +* disk to a fast network). +*/ + flags |=SPLICE_F_NOWAIT ; + read_len = ret; sd->total_len = read_len;
include/linux/splice.h +3 -1
@@ -21,7 +21,9 @@#define SPLICE_F_MORE (0x04)/* expect more data */ #define SPLICE_F_GIFT (0x08)/* pages passed in are a gift */ -#define SPLICE_F_ALL (SPLICE_F_MOVE|SPLICE_F_NONBLOCK|SPLICE_F_MORE|SPLICE_F_GIFT) +#define SPLICE_F_NOWAIT (0x10)/* do not wait for data which is not immediately available */ + +#define SPLICE_F_ALL (SPLICE_F_MOVE|SPLICE_F_NONBLOCK|SPLICE_F_MORE|SPLICE_F_GIFT|SPLICE_F_NOWAIT)/* * Passed to the actors
Signature · 1 line
2.39.2
Christian Brauner
maintainerfs/splice.c ssize_t splice_direct_to_actor(struct file *in, struct splice_desc *sd, · line 1086
Quoted 12 lines
fs/splice.c +12
-0+/* +* After at least one byte was read from the input +* file, don't wait for blocking I/O in the following +* loop iterations; instead of blocking for arbitrary +* amounts of time in the kernel, let userspace decide +* how to proceed. This avoids excessive latency if +* the output is being consumed faster than the input +* file can fill it (e.g. sendfile() from a slow hard +* disk to a fast network). +*/ + flags |=SPLICE_F_NOWAIT ; +
Hm, so the thing that is worrysome about this change is that this may cause regressions afaict as this is a pretty significant change from current behavior.
Quoted 3 lines · Christian Brauner
Hm, so the thing that is worrysome about this change is that this may cause regressions afaict as this is a pretty significant change from current behavior.
Would you prefer a new flag for explicitly selecting "wait until at least one byte was transferred, but don't wait further"? Because many applications need this behavior, and some (like nginx) have already worked around the problem by limiting the maximum transaction size, which I consider a bad workaround, because it leads to unnecessary system calls and still doesn't really solve the latency problem.
On the other hand, what exactly would the absence of this flag mean... the old behavior, without my patch, can lead to partial transfers, and the absence of the flag doesn't mean it can't happen; my patch tackles just one corner case, but one that is important for me.
We have been running this patch in production for nearly a year (and will continue to do so until upstream kernels have a proper solution) and never observed a problem, and I consider it safe, but I acknowledge the risk that this may reveal obscure application bugs if applied globally to all Linux kernels, so I understand your worries.
Max
Christian Brauner
maintainerQuoted 7 lines · Max Kellermann
Quoted 3 lines · Christian Brauner
Hm, so the thing that is worrysome about this change is that this may cause regressions afaict as this is a pretty significant change from current behavior.
Would you prefer a new flag for explicitly selecting "wait until at least one byte was transferred, but don't wait further"? Because many
I had thought about it but afaict it'd be rather annoying as one can get into that code from copy_file_range() as well so we'd need a new flag for that system call as well afaict.
Quoted 10 lines
applications need this behavior, and some (like nginx) have already worked around the problem by limiting the maximum transaction size, which I consider a bad workaround, because it leads to unnecessary system calls and still doesn't really solve the latency problem.
On the other hand, what exactly would the absence of this flag mean... the old behavior, without my patch, can lead to partial transfers, and the absence of the flag doesn't mean it can't happen; my patch tackles just one corner case, but one that is important for me.
Quoted 5 lines
We have been running this patch in production for nearly a year (and will continue to do so until upstream kernels have a proper solution) and never observed a problem, and I consider it safe, but I acknowledge the risk that this may reveal obscure application bugs if applied globally to all Linux kernels, so I understand your worries.
I think hanging for an insane amount of time is indeed a problem and tweaking the code in this way might actually be useful but we'd need to let this soak for quite a while to see whether this causes any issues.
@Jens, what do you think? Is this worth it?
Quoted 8 lines · Christian Brauner
Quoted 6 lines
OK. I suggest we get this patch merged first, and then I prepare a patch for wiring this into uapi, changing
SPLICE_F_NOWAITto0x10(the lowest free bit), add it toSPLICE_F_ALLand document it.(If you prefer to have it all in this initial patch, I can amend and resubmit it with the uapi feature.)
Please resend it all in one patch. That's easier for all to review.
Done. Though I was surprised there's no "uapi" header for splice, so I only changed the value to 0x10 and added it to SPLICE_F_ALL.
Since the splice manpage is in a different repository, I'll submit a separate patch for that; can't be one patch.
Max