KVM: arm64: Accelerate lookup of vcpus by MPIDR values (and other fixes)
Subsystems (4)
Marc Zyngier
maintainerv3 cover KVM: arm64: Accelerate lookup of vcpus by MPIDR values (and other fixes)
This is a follow-up on [2], which addresses both the O(n) SGI injection issue, and cleans up a number of embarassing bugs steaming form the vcpuid/vcpu_idx confusion.
See the changelog below for details.
Oliver, assuming that you haven't changed your mind and that nobody shouts, feel free to queue this in -next.
* From v2 [2]:
- Killed a number of online_vcpus comparisons, which didn't make much sense (Zenghui)
- Added missing commit logs (oops)
- Fixed some comments
- Collected RBs, with thanks
* From v1 [1]:
- Added a bunch of patches fixing the vcpu_id[x] ambiguity
- Added a documentation update spelling out some extra ordering requirements
- Collected RBs/TBs, with thanks
[1] https://lore.kernel.org/r/[email protected]
[2] https://lore.kernel.org/r/[email protected]
Marc Zyngier (11):
KVM: arm64: vgic: Make kvm_vgic_inject_irq() take a vcpu pointer
KVM: arm64: vgic-its: Treat the collection target address as a vcpu_id
KVM: arm64: vgic-v3: Refactor GICv3 SGI generation
KVM: arm64: vgic-v2: Use cpuid from userspace as vcpu_id
KVM: arm64: vgic: Use vcpu_idx for the debug information
KVM: arm64: Use vcpu_idx for invalidation tracking
KVM: arm64: Simplify kvm_vcpu_get_mpidr_aff()
KVM: arm64: Build MPIDR to vcpu index cache at runtime
KVM: arm64: Fast-track kvm_mpidr_to_vcpu() when mpidr_data is
available
KVM: arm64: vgic-v3: Optimize affinity-based SGI injection
KVM: arm64: Clarify the ordering requirements for vcpu/RD creation
.../virt/kvm/devices/arm-vgic-v3.rst | 7 + arch/arm64/include/asm/kvm_emulate.h | 2 +- arch/arm64/include/asm/kvm_host.h | 28 ++++ arch/arm64/kvm/arch_timer.c | 2 +- arch/arm64/kvm/arm.c | 93 +++++++++-- arch/arm64/kvm/pmu-emul.c | 2 +- arch/arm64/kvm/vgic/vgic-debug.c | 6 +- arch/arm64/kvm/vgic/vgic-irqfd.c | 2 +- arch/arm64/kvm/vgic/vgic-its.c | 49 +++--- arch/arm64/kvm/vgic/vgic-kvm-device.c | 8 +- arch/arm64/kvm/vgic/vgic-mmio-v3.c | 150 +++++++----------- arch/arm64/kvm/vgic/vgic.c | 12 +- include/kvm/arm_vgic.h | 4 +- 13 files changed, 212 insertions(+), 153 deletions(-)
Signature · 1 line
2.34.1
Marc Zyngier
maintainerPATCH v3 1/11 KVM: arm64: vgic: Make kvm_vgic_inject_irq() take a vcpu pointer
Passing a vcpu_id to kvm_vgic_inject_irq() is silly for two reasons:
- we often confuse vcpu_id and vcpu_idx
- we eventually have to convert it back to a vcpu
- we can't count
Instead, pass a vcpu pointer, which is unambiguous. A NULL vcpu is also allowed for interrupts that are not private to a vcpu (such as SPIs).
--- arch/arm64/kvm/arch_timer.c | 2 +- arch/arm64/kvm/arm.c | 23 ++++++++--------------- arch/arm64/kvm/pmu-emul.c | 2 +- arch/arm64/kvm/vgic/vgic-irqfd.c | 2 +- arch/arm64/kvm/vgic/vgic.c | 12 +++++------- include/kvm/arm_vgic.h | 4 ++-- 6 files changed, 18 insertions(+), 27 deletions(-)
arch/arm64/kvm/arch_timer.c +1 -1
@@ -458,7 +458,7 @@ static void kvm_timer_update_irq(struct kvm_vcpu *vcpu, bool new_level, timer_ctx->irq.level);if (!userspace_irqchip (vcpu->kvm)) { - ret =kvm_vgic_inject_irq (vcpu->kvm, vcpu->vcpu_id, + ret =kvm_vgic_inject_irq (vcpu->kvm, vcpu,timer_irq (timer_ctx), timer_ctx->irq.level, timer_ctx);
arch/arm64/kvm/arm.c +8 -15
@@ -1134,27 +1134,23 @@ int kvm_vm_ioctl_irq_line(struct kvm *kvm, struct kvm_irq_level *irq_level, bool line_status) {u32 irq = irq_level->irq; -unsigned int irq_type, vcpu_idx, irq_num; -int nrcpus =atomic_read (&kvm->online_vcpus); +unsigned int irq_type, vcpu_id, irq_num;struct kvm_vcpu *vcpu =NULL ;bool level = irq_level->level; irq_type = (irq >>KVM_ARM_IRQ_TYPE_SHIFT ) &KVM_ARM_IRQ_TYPE_MASK ; - vcpu_idx = (irq >>KVM_ARM_IRQ_VCPU_SHIFT ) &KVM_ARM_IRQ_VCPU_MASK ; - vcpu_idx += ((irq >>KVM_ARM_IRQ_VCPU2_SHIFT ) &KVM_ARM_IRQ_VCPU2_MASK ) * (KVM_ARM_IRQ_VCPU_MASK +1 ); + vcpu_id = (irq >>KVM_ARM_IRQ_VCPU_SHIFT ) &KVM_ARM_IRQ_VCPU_MASK ; + vcpu_id += ((irq >>KVM_ARM_IRQ_VCPU2_SHIFT ) &KVM_ARM_IRQ_VCPU2_MASK ) * (KVM_ARM_IRQ_VCPU_MASK +1 ); irq_num = (irq >>KVM_ARM_IRQ_NUM_SHIFT ) &KVM_ARM_IRQ_NUM_MASK ; -trace_kvm_irq_line (irq_type, vcpu_idx, irq_num, irq_level->level); +trace_kvm_irq_line (irq_type, vcpu_id, irq_num, irq_level->level);switch (irq_type) {case KVM_ARM_IRQ_TYPE_CPU :if (irqchip_in_kernel (kvm))return -ENXIO ; -if (vcpu_idx >= nrcpus) -return -EINVAL ; - - vcpu =kvm_get_vcpu (kvm, vcpu_idx); + vcpu =kvm_get_vcpu_by_id (kvm, vcpu_id);if (!vcpu)return -EINVAL ;
@@ -1166,17 +1162,14 @@ int kvm_vm_ioctl_irq_line(struct kvm *kvm, struct kvm_irq_level *irq_level,if (!irqchip_in_kernel (kvm))return -ENXIO ; -if (vcpu_idx >= nrcpus) -return -EINVAL ; - - vcpu =kvm_get_vcpu (kvm, vcpu_idx); + vcpu =kvm_get_vcpu_by_id (kvm, vcpu_id);if (!vcpu)return -EINVAL ;if (irq_num <VGIC_NR_SGIS || irq_num >=VGIC_NR_PRIVATE_IRQS )return -EINVAL ; -return kvm_vgic_inject_irq (kvm, vcpu->vcpu_id, irq_num, level,NULL ); +return kvm_vgic_inject_irq (kvm, vcpu, irq_num, level,NULL );case KVM_ARM_IRQ_TYPE_SPI :if (!irqchip_in_kernel (kvm))return -ENXIO ;
@@ -1184,7 +1177,7 @@ int kvm_vm_ioctl_irq_line(struct kvm *kvm, struct kvm_irq_level *irq_level,if (irq_num <VGIC_NR_PRIVATE_IRQS )return -EINVAL ; -return kvm_vgic_inject_irq (kvm,0 , irq_num, level,NULL ); +return kvm_vgic_inject_irq (kvm,NULL , irq_num, level,NULL ); }return -EINVAL ;
arch/arm64/kvm/pmu-emul.c +1 -1
@@ -348,7 +348,7 @@ static void kvm_pmu_update_state(struct kvm_vcpu *vcpu) pmu->irq_level = overflow;if (likely (irqchip_in_kernel (vcpu->kvm))) { -int ret =kvm_vgic_inject_irq (vcpu->kvm, vcpu->vcpu_id, +int ret =kvm_vgic_inject_irq (vcpu->kvm, vcpu, pmu->irq_num, overflow, pmu);WARN_ON (ret); }
arch/arm64/kvm/vgic/vgic-irqfd.c +1 -1
@@ -23,7 +23,7 @@ static int vgic_irqfd_set_irq(struct kvm_kernel_irq_routing_entry *e,if (!vgic_valid_spi (kvm, spi_id))return -EINVAL ; -return kvm_vgic_inject_irq (kvm,0 , spi_id, level,NULL ); +return kvm_vgic_inject_irq (kvm,NULL , spi_id, level,NULL ); }/**
arch/arm64/kvm/vgic/vgic.c +5 -7
@@ -422,7 +422,7 @@ bool vgic_queue_irq_unlock(struct kvm *kvm, struct vgic_irq *irq,/** * kvm_vgic_inject_irq - Inject an IRQ from a device to the vgic * @kvm: The VM structure pointer -* @cpuid: The CPU for PPIs +* @vcpu: The CPU for PPIs or NULL for global interrupts * @intid: The INTID to inject a new state to. * @level: Edge-triggered: true: to trigger the interrupt * false: to ignore the call
@@ -436,24 +436,22 @@ bool vgic_queue_irq_unlock(struct kvm *kvm, struct vgic_irq *irq,* level-sensitive interrupts. You can think of the level parameter as 1 * being HIGH and 0 being LOW and all devices being active-HIGH. */ -int kvm_vgic_inject_irq (struct kvm *kvm,int cpuid,unsigned int intid, -bool level,void *owner) +int kvm_vgic_inject_irq (struct kvm *kvm,struct kvm_vcpu *vcpu, +unsigned int intid,bool level,void *owner) { -struct kvm_vcpu *vcpu;struct vgic_irq *irq;unsigned long flags;int ret; -trace_vgic_update_irq_pending (cpuid, intid, level); - ret =vgic_lazy_init (kvm);if (ret)return ret; - vcpu =kvm_get_vcpu (kvm, cpuid);if (!vcpu && intid <VGIC_NR_PRIVATE_IRQS )return -EINVAL ; +trace_vgic_update_irq_pending (vcpu ? vcpu->vcpu_idx :0 , intid, level); + irq =vgic_get_irq (kvm, vcpu, intid);if (!irq)return -EINVAL ;
include/kvm/arm_vgic.h +2 -2
@@ -375,8 +375,8 @@ int kvm_vgic_map_resources(struct kvm *kvm);int kvm_vgic_hyp_init (void );void kvm_vgic_init_cpu_hardware (void ); -int kvm_vgic_inject_irq (struct kvm *kvm,int cpuid,unsigned int intid, -bool level,void *owner); +int kvm_vgic_inject_irq (struct kvm *kvm,struct kvm_vcpu *vcpu, +unsigned int intid,bool level,void *owner);int kvm_vgic_map_phys_irq (struct kvm_vcpu *vcpu,unsigned int host_irq,u32 vintid,struct irq_ops *ops);int kvm_vgic_unmap_phys_irq (struct kvm_vcpu *vcpu,unsigned int vintid);
Signature · 1 line
2.34.1
Marc Zyngier
maintainerPATCH v3 2/11 KVM: arm64: vgic-its: Treat the collection target address as a vcpu_id
In reply to Marc ZyngierSince our emulated ITS advertises GITS_TYPER.PTA=0, the target address associated to a collection is a PE number and not an address. So far, so good. However, the PE number is what userspace has provided given us (aka the vcpu_id), and not the internal vcpu index.
Make sure we consistently retrieve the vcpu by ID rather than by index, adding a helper that deals with most of the cases.
We also get rid of the pointless (and bogus) comparisons to online_vcpus, which don't really make sense.
--- arch/arm64/kvm/vgic/vgic-its.c | 49 +++++++++++++++++++--------------- 1 file changed, 27 insertions(+), 22 deletions(-)
arch/arm64/kvm/vgic/vgic-its.c +27 -22
@@ -378,6 +378,12 @@ static int update_affinity(struct vgic_irq *irq, struct kvm_vcpu *vcpu)return ret; } +static struct kvm_vcpu *collection_to_vcpu (struct kvm *kvm, +struct its_collection *col) +{ +return kvm_get_vcpu_by_id (kvm, col->target_addr); +} +/* * Promotes the ITS view of affinity of an ITTE (which redistributor this LPI * is targeting) to the VGIC's view, which deals with target VCPUs.
@@ -391,7 +397,7 @@ static void update_affinity_ite(struct kvm *kvm, struct its_ite *ite)if (!its_is_collection_mapped (ite->collection))return ; - vcpu =kvm_get_vcpu (kvm, ite->collection->target_addr); + vcpu =collection_to_vcpu (kvm, ite->collection);update_affinity (ite->irq, vcpu); }
@@ -679,7 +685,7 @@ int vgic_its_resolve_lpi(struct kvm *kvm, struct vgic_its *its,if (!ite || !its_is_collection_mapped (ite->collection))return E_ITS_INT_UNMAPPED_INTERRUPT ; - vcpu =kvm_get_vcpu (kvm, ite->collection->target_addr); + vcpu =collection_to_vcpu (kvm, ite->collection);if (!vcpu)return E_ITS_INT_UNMAPPED_INTERRUPT ;
@@ -887,7 +893,7 @@ static int vgic_its_cmd_handle_movi(struct kvm *kvm, struct vgic_its *its,return E_ITS_MOVI_UNMAPPED_COLLECTION ; ite->collection = collection; - vcpu =kvm_get_vcpu (kvm, collection->target_addr); + vcpu =collection_to_vcpu (kvm, collection);vgic_its_invalidate_cache (kvm);
@@ -1121,7 +1127,7 @@ static int vgic_its_cmd_handle_mapi(struct kvm *kvm, struct vgic_its *its, }if (its_is_collection_mapped (collection)) - vcpu =kvm_get_vcpu (kvm, collection->target_addr); + vcpu =collection_to_vcpu (kvm, collection); irq =vgic_add_lpi (kvm, lpi_nr, vcpu);if (IS_ERR (irq)) {
@@ -1242,21 +1248,22 @@ static int vgic_its_cmd_handle_mapc(struct kvm *kvm, struct vgic_its *its, u64 *its_cmd) {u16 coll_id; -u32 target_addr;struct its_collection *collection;bool valid; valid =its_cmd_get_validbit (its_cmd); coll_id =its_cmd_get_collection (its_cmd); - target_addr =its_cmd_get_target_addr (its_cmd); - -if (target_addr >=atomic_read (&kvm->online_vcpus)) -return E_ITS_MAPC_PROCNUM_OOR ;if (!valid) {vgic_its_free_collection (its, coll_id);vgic_its_invalidate_cache (kvm); }else { +struct kvm_vcpu *vcpu; + + vcpu =kvm_get_vcpu_by_id (kvm,its_cmd_get_target_addr (its_cmd)); +if (!vcpu) +return E_ITS_MAPC_PROCNUM_OOR ; + collection =find_collection (its, coll_id);if (!collection) {
@@ -1270,9 +1277,9 @@ static int vgic_its_cmd_handle_mapc(struct kvm *kvm, struct vgic_its *its, coll_id);if (ret)return ret; - collection->target_addr = target_addr; + collection->target_addr = vcpu->vcpu_id; }else { - collection->target_addr = target_addr; + collection->target_addr = vcpu->vcpu_id;update_affinity_collection (kvm, its, collection); } }
@@ -1382,7 +1389,7 @@ static int vgic_its_cmd_handle_invall(struct kvm *kvm, struct vgic_its *its,if (!its_is_collection_mapped (collection))return E_ITS_INVALL_UNMAPPED_COLLECTION ; - vcpu =kvm_get_vcpu (kvm, collection->target_addr); + vcpu =collection_to_vcpu (kvm, collection);vgic_its_invall (vcpu);return 0 ;
@@ -1399,23 +1406,21 @@ static int vgic_its_cmd_handle_invall(struct kvm *kvm, struct vgic_its *its,static int vgic_its_cmd_handle_movall (struct kvm *kvm,struct vgic_its *its,u64 *its_cmd) { -u32 target1_addr =its_cmd_get_target_addr (its_cmd); -u32 target2_addr =its_cmd_mask_field (its_cmd,3 ,16 ,32 );struct kvm_vcpu *vcpu1, *vcpu2;struct vgic_irq *irq;u32 *intids;int irq_count, i; -if (target1_addr >=atomic_read (&kvm->online_vcpus) || - target2_addr >=atomic_read (&kvm->online_vcpus)) +/* We advertise GITS_TYPER.PTA==0, making the address the vcpu ID */ + vcpu1 =kvm_get_vcpu_by_id (kvm,its_cmd_get_target_addr (its_cmd)); + vcpu2 =kvm_get_vcpu_by_id (kvm,its_cmd_mask_field (its_cmd,3 ,16 ,32 )); + +if (!vcpu1 || !vcpu2)return E_ITS_MOVALL_PROCNUM_OOR ; -if (target1_addr == target2_addr) +if (vcpu1 == vcpu2)return 0 ; - vcpu1 =kvm_get_vcpu (kvm, target1_addr); - vcpu2 =kvm_get_vcpu (kvm, target2_addr); - irq_count =vgic_copy_lpi_list (kvm, vcpu1, &intids);if (irq_count <0 )return irq_count;
@@ -2258,7 +2263,7 @@ static int vgic_its_restore_ite(struct vgic_its *its, u32 event_id,return PTR_ERR (ite);if (its_is_collection_mapped (collection)) - vcpu =kvm_get_vcpu (kvm, collection->target_addr); + vcpu =kvm_get_vcpu_by_id (kvm, collection->target_addr); irq =vgic_add_lpi (kvm, lpi_id, vcpu);if (IS_ERR (irq)) {
@@ -2573,7 +2578,7 @@ static int vgic_its_restore_cte(struct vgic_its *its, gpa_t gpa, int esz) coll_id = val &KVM_ITS_CTE_ICID_MASK ;if (target_addr !=COLLECTION_NOT_MAPPED && - target_addr >=atomic_read (&kvm->online_vcpus)) + !kvm_get_vcpu_by_id (kvm, target_addr))return -EINVAL ; collection =find_collection (its, coll_id);
Signature · 1 line
2.34.1
Marc Zyngier
maintainerPATCH v3 3/11 KVM: arm64: vgic-v3: Refactor GICv3 SGI generation
In reply to Marc ZyngierAs we're about to change the way SGIs are sent, start by splitting out some of the basic functionnality: instead of intermingling the broadcast and non-broadcast cases with the actual SGI generation, perform the following cleanups:
- move the SGI queuing into its own helper
- split the broadcast code from the affinity-driven code
- replace the mask/shift combinations with FIELD_GET()
- fix the confusion between vcpu_id and vcpu when handling the broadcast case
The result is much more readable, and paves the way for further optimisations.
--- arch/arm64/kvm/vgic/vgic-mmio-v3.c | 110 ++++++++++++++++------------- 1 file changed, 59 insertions(+), 51 deletions(-)
arch/arm64/kvm/vgic/vgic-mmio-v3.c +59 -51
@@ -1052,6 +1052,38 @@ static int match_mpidr(u64 sgi_aff, u16 sgi_cpu_mask, struct kvm_vcpu *vcpu) ((((reg) & ICC_SGI1R_AFFINITY_## level ##_MASK) \ >> ICC_SGI1R_AFFINITY_## level ##_SHIFT) << MPIDR_LEVEL_SHIFT(level)) +static void vgic_v3_queue_sgi (struct kvm_vcpu *vcpu,u32 sgi,bool allow_group1) +{ +struct vgic_irq *irq =vgic_get_irq (vcpu->kvm, vcpu, sgi); +unsigned long flags; + +raw_spin_lock_irqsave (&irq->irq_lock, flags); + +/* +* An access targeting Group0 SGIs can only generate +* those, while an access targeting Group1 SGIs can +* generate interrupts of either group. +*/ +if (!irq->group || allow_group1) { +if (!irq->hw) { + irq->pending_latch = true; +vgic_queue_irq_unlock (vcpu->kvm, irq, flags); + }else { +/* HW SGI? Ask the GIC to inject it */ +int err; + err =irq_set_irqchip_state (irq->host_irq, +IRQCHIP_STATE_PENDING , + true); +WARN_RATELIMIT (err,"IRQ %d" , irq->host_irq); +raw_spin_unlock_irqrestore (&irq->irq_lock, flags); + } + }else { +raw_spin_unlock_irqrestore (&irq->irq_lock, flags); + } + +vgic_put_irq (vcpu->kvm, irq); +} +/** * vgic_v3_dispatch_sgi - handle SGI requests from VCPUs * @vcpu: The VCPU requesting a SGI
@@ -1070,19 +1102,30 @@ void vgic_v3_dispatch_sgi(struct kvm_vcpu *vcpu, u64 reg, bool allow_group1) {struct kvm *kvm = vcpu->kvm;struct kvm_vcpu *c_vcpu; -u16 target_cpus; +unsigned long target_cpus;u64 mpidr; -int sgi; -int vcpu_id = vcpu->vcpu_id; -bool broadcast; -unsigned long c, flags; - - sgi = (reg &ICC_SGI1R_SGI_ID_MASK ) >>ICC_SGI1R_SGI_ID_SHIFT ; - broadcast = reg &BIT_ULL (ICC_SGI1R_IRQ_ROUTING_MODE_BIT ); - target_cpus = (reg &ICC_SGI1R_TARGET_LIST_MASK ) >>ICC_SGI1R_TARGET_LIST_SHIFT ; +u32 sgi; +unsigned long c; + + sgi =FIELD_GET (ICC_SGI1R_SGI_ID_MASK , reg); + +/* Broadcast */ +if (unlikely (reg &BIT_ULL (ICC_SGI1R_IRQ_ROUTING_MODE_BIT ))) { +kvm_for_each_vcpu (c, c_vcpu, kvm) { +/* Don't signal the calling VCPU */ +if (c_vcpu == vcpu) +continue ; + +vgic_v3_queue_sgi (c_vcpu, sgi, allow_group1); + } + +return ; + } + mpidr =SGI_AFFINITY_LEVEL (reg,3 ); mpidr |=SGI_AFFINITY_LEVEL (reg,2 ); mpidr |=SGI_AFFINITY_LEVEL (reg,1 ); + target_cpus =FIELD_GET (ICC_SGI1R_TARGET_LIST_MASK , reg);/* * We iterate over all VCPUs to find the MPIDRs matching the request.
@@ -1091,54 +1134,19 @@ void vgic_v3_dispatch_sgi(struct kvm_vcpu *vcpu, u64 reg, bool allow_group1)* VCPUs when most of the times we just signal a single VCPU. */ kvm_for_each_vcpu (c, c_vcpu, kvm) { -struct vgic_irq *irq; +int level0;/* Exit early if we have dealt with all requested CPUs */ -if (!broadcast && target_cpus ==0 ) +if (target_cpus ==0 )break ; - -/* Don't signal the calling VCPU */ -if (broadcast && c == vcpu_id) + level0 =match_mpidr (mpidr, target_cpus, c_vcpu); +if (level0 ==-1 )continue ; -if (!broadcast) { -int level0; - - level0 =match_mpidr (mpidr, target_cpus, c_vcpu); -if (level0 ==-1 ) -continue ; - -/* remove this matching VCPU from the mask */ - target_cpus &= ~BIT (level0); - } +/* remove this matching VCPU from the mask */ + target_cpus &= ~BIT (level0); - irq =vgic_get_irq (vcpu->kvm, c_vcpu, sgi); - -raw_spin_lock_irqsave (&irq->irq_lock, flags); - -/* -* An access targeting Group0 SGIs can only generate -* those, while an access targeting Group1 SGIs can -* generate interrupts of either group. -*/ -if (!irq->group || allow_group1) { -if (!irq->hw) { - irq->pending_latch = true; -vgic_queue_irq_unlock (vcpu->kvm, irq, flags); - }else { -/* HW SGI? Ask the GIC to inject it */ -int err; - err =irq_set_irqchip_state (irq->host_irq, -IRQCHIP_STATE_PENDING , - true); -WARN_RATELIMIT (err,"IRQ %d" , irq->host_irq); -raw_spin_unlock_irqrestore (&irq->irq_lock, flags); - } - }else { -raw_spin_unlock_irqrestore (&irq->irq_lock, flags); - } - -vgic_put_irq (vcpu->kvm, irq); +vgic_v3_queue_sgi (c_vcpu, sgi, allow_group1); } }
Signature · 1 line
2.34.1
Marc Zyngier
maintainerPATCH v3 4/11 KVM: arm64: vgic-v2: Use cpuid from userspace as vcpu_id
In reply to Marc ZyngierWhen parsing a GICv2 attribute that contains a cpuid, handle this as the vcpu_id, not a vcpu_idx, as userspace cannot really know the mapping between the two. For this, use kvm_get_vcpu_by_id() instead of kvm_get_vcpu().
Take this opportunity to get rid of the pointless check against online_vcpus, which doesn't make much sense either, and switch to FIELD_GET as a way to extract the vcpu_id.
--- arch/arm64/kvm/vgic/vgic-kvm-device.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)
arch/arm64/kvm/vgic/vgic-kvm-device.c +2 -6
@@ -339,13 +339,9 @@ int vgic_v2_parse_attr(struct kvm_device *dev, struct kvm_device_attr *attr, {int cpuid; - cpuid = (attr->attr &KVM_DEV_ARM_VGIC_CPUID_MASK ) >> -KVM_DEV_ARM_VGIC_CPUID_SHIFT ; + cpuid =FIELD_GET (KVM_DEV_ARM_VGIC_CPUID_MASK , attr->attr); -if (cpuid >=atomic_read (&dev->kvm->online_vcpus)) -return -EINVAL ; - - reg_attr->vcpu =kvm_get_vcpu (dev->kvm, cpuid); + reg_attr->vcpu =kvm_get_vcpu_by_id (dev->kvm, cpuid); reg_attr->addr = attr->attr &KVM_DEV_ARM_VGIC_OFFSET_MASK ;return 0 ;
Signature · 1 line
2.34.1
Marc Zyngier
maintainerPATCH v3 5/11 KVM: arm64: vgic: Use vcpu_idx for the debug information
In reply to Marc ZyngierWhen dumping the debug information, use vcpu_idx instead of vcpu_id, as this is independent of any userspace influence.
--- arch/arm64/kvm/vgic/vgic-debug.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
arch/arm64/kvm/vgic/vgic-debug.c +3 -3
@@ -166,7 +166,7 @@ static void print_header(struct seq_file *s, struct vgic_irq *irq,if (vcpu) { hdr ="VCPU" ; - id = vcpu->vcpu_id; + id = vcpu->vcpu_idx; }seq_printf (s,"\n" );
@@ -212,7 +212,7 @@ static void print_irq_state(struct seq_file *s, struct vgic_irq *irq," %2d " "\n" , type, irq->intid, - (irq->target_vcpu) ? irq->target_vcpu->vcpu_id :-1 , + (irq->target_vcpu) ? irq->target_vcpu->vcpu_idx :-1 , pending, irq->line_level, irq->active,
@@ -224,7 +224,7 @@ static void print_irq_state(struct seq_file *s, struct vgic_irq *irq, irq->mpidr, irq->source, irq->priority, - (irq->vcpu) ? irq->vcpu->vcpu_id : -1); + (irq->vcpu) ? irq->vcpu->vcpu_idx : -1); }static int vgic_debug_show (struct seq_file *s,void *v)
Signature · 1 line
2.34.1
Marc Zyngier
maintainerPATCH v3 6/11 KVM: arm64: Use vcpu_idx for invalidation tracking
In reply to Marc ZyngierWhile vcpu_id isn't necessarily a bad choice as an identifier for the currently running vcpu, it is provided by userspace, and there is close to no guarantee that it would be unique.
Switch it to vcpu_idx instead, for which we have much stronger guarantees.
--- arch/arm64/kvm/arm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/kvm/arm.c +2 -2
@@ -438,9 +438,9 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)* We might get preempted before the vCPU actually runs, but * over-invalidation doesn't affect correctness. */ -if (*last_ran != vcpu->vcpu_id) { +if (*last_ran != vcpu->vcpu_idx) {kvm_call_hyp (__kvm_flush_cpu_context, mmu); - *last_ran = vcpu->vcpu_id; + *last_ran = vcpu->vcpu_idx; } vcpu->cpu = cpu;
Signature · 1 line
2.34.1
Marc Zyngier
maintainerPATCH v3 7/11 KVM: arm64: Simplify kvm_vcpu_get_mpidr_aff()
In reply to Marc ZyngierBy definition, MPIDR_EL1 cannot be modified by the guest. This means it is pointless to check whether this is loaded on the CPU.
Simplify the kvm_vcpu_get_mpidr_aff() helper to directly access the in-memory value.
--- arch/arm64/include/asm/kvm_emulate.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/include/asm/kvm_emulate.h +1 -1
@@ -465,7 +465,7 @@ static inline bool kvm_is_write_fault(struct kvm_vcpu *vcpu)static inline unsigned long kvm_vcpu_get_mpidr_aff (struct kvm_vcpu *vcpu) { -return vcpu_read_sys_reg (vcpu,MPIDR_EL1 ) &MPIDR_HWID_BITMASK ; +return __vcpu_sys_reg (vcpu,MPIDR_EL1 ) &MPIDR_HWID_BITMASK ; }static inline void kvm_vcpu_set_be (struct kvm_vcpu *vcpu)
Signature · 1 line
2.34.1
Marc Zyngier
maintainerPATCH v3 8/11 KVM: arm64: Build MPIDR to vcpu index cache at runtime
In reply to Marc ZyngierThe MPIDR_EL1 register contains a unique value that identifies the CPU. The only problem with it is that it is stupidly large (32 bits, once the useless stuff is removed).
Trying to obtain a vcpu from an MPIDR value is a fairly common, yet costly operation: we iterate over all the vcpus until we find the correct one. While this is cheap for small VMs, it is pretty expensive on large ones, specially if you are trying to get to the one that's at the end of the list...
In order to help with this, it is important to realise that the MPIDR values are actually structured, and that implementations tend to use a small number of significant bits in the 32bit space.
We can use this fact to our advantage by computing a small hash table that uses the "compression" of the significant MPIDR bits as an index, giving us the vcpu index as a result.
Given that the MPIDR values can be supplied by userspace, and that an evil VMM could decide to make *all* bits significant, resulting in a 4G-entry table, we only use this method if the resulting table fits in a single page. Otherwise, we fallback to the good old iterative method.
Nothing uses that table just yet, but keep your eyes peeled.
--- arch/arm64/include/asm/kvm_host.h | 28 ++++++++++++++++ arch/arm64/kvm/arm.c | 54 +++++++++++++++++++++++++++++++ 2 files changed, 82 insertions(+)
arch/arm64/include/asm/kvm_host.h +28 -0
@@ -202,6 +202,31 @@ struct kvm_protected_vm {struct kvm_hyp_memcache teardown_mc; }; +struct kvm_mpidr_data { +u64 mpidr_mask; + DECLARE_FLEX_ARRAY(u16, cmpidr_to_idx); +}; + +static inline u16 kvm_mpidr_index (struct kvm_mpidr_data *data,u64 mpidr) +{ +unsigned long mask = data->mpidr_mask; +u64 aff = mpidr &MPIDR_HWID_BITMASK ; +int nbits, bit, bit_idx =0 ; +u16 index =0 ; + +/* +* If this looks like RISC-V's BEXT or x86's PEXT +* instructions, it isn't by accident. +*/ + nbits =fls (mask); +for_each_set_bit (bit, &mask, nbits) { + index |= (aff &BIT (bit)) >> (bit - bit_idx); + bit_idx++; + } + +return index; +} +struct kvm_arch {struct kvm_s2_mmu mmu;
@@ -248,6 +273,9 @@ struct kvm_arch {/* VM-wide vCPU feature set */ DECLARE_BITMAP (vcpu_features,KVM_VCPU_MAX_FEATURES ); +/* MPIDR to vcpu index mapping, optional */ +struct kvm_mpidr_data *mpidr_data; +/* * VM-wide PMU filter, implemented as a bitmap and big enough for * up to 2^10 events (ARMv8.0) or 2^16 events (ARMv8.1+).
arch/arm64/kvm/arm.c +54 -0
72 lines not on this page · raw message
Signature · 1 line
2.34.1
Marc Zyngier
maintainerPATCH v3 9/11 KVM: arm64: Fast-track kvm_mpidr_to_vcpu() when mpidr_data is available
In reply to Marc ZyngierIf our fancy little table is present when calling kvm_mpidr_to_vcpu(), use it to recover the corresponding vcpu.
--- arch/arm64/kvm/arm.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
arch/arm64/kvm/arm.c +12 -0
@@ -2388,6 +2388,18 @@ struct kvm_vcpu *kvm_mpidr_to_vcpu(struct kvm *kvm, unsigned long mpidr)unsigned long i; mpidr &=MPIDR_HWID_BITMASK ; + +if (kvm->arch.mpidr_data) { +u16 idx =kvm_mpidr_index (kvm->arch.mpidr_data, mpidr); + + vcpu =kvm_get_vcpu (kvm, + kvm->arch.mpidr_data->cmpidr_to_idx[idx]); +if (mpidr !=kvm_vcpu_get_mpidr_aff (vcpu)) + vcpu =NULL ; + +return vcpu; + } +kvm_for_each_vcpu (i, vcpu, kvm) {if (mpidr ==kvm_vcpu_get_mpidr_aff (vcpu))return vcpu;
Signature · 1 line
2.34.1
Marc Zyngier
maintainerPATCH v3 10/11 KVM: arm64: vgic-v3: Optimize affinity-based SGI injection
In reply to Marc ZyngierOur affinity-based SGI injection code is a bit daft. We iterate over all the CPUs trying to match the set of affinities that the guest is trying to reach, leading to some very bad behaviours if the selected targets are at a high vcpu index.
Instead, we can now use the fact that we have an optimised MPIDR to vcpu mapping, and only look at the relevant values.
This results in a much faster injection for large VMs, and in a near constant time, irrespective of the position in the vcpu index space.
As a bonus, this is mostly deleting a lot of hard-to-read code. Nobody will complain about that.
--- arch/arm64/kvm/vgic/vgic-mmio-v3.c | 64 +++++------------------------- 1 file changed, 11 insertions(+), 53 deletions(-)
arch/arm64/kvm/vgic/vgic-mmio-v3.c +11 -53
@@ -1013,35 +1013,6 @@ int vgic_v3_has_attr_regs(struct kvm_device *dev, struct kvm_device_attr *attr)return 0 ; } -/* -* Compare a given affinity (level 1-3 and a level 0 mask, from the SGI -* generation register ICC_SGI1R_EL1) with a given VCPU. -* If the VCPU's MPIDR matches, return the level0 affinity, otherwise -* return -1. -*/ -static int match_mpidr (u64 sgi_aff,u16 sgi_cpu_mask,struct kvm_vcpu *vcpu) -{ -unsigned long affinity; -int level0; - -/* -* Split the current VCPU's MPIDR into affinity level 0 and the -* rest as this is what we have to compare against. -*/ - affinity =kvm_vcpu_get_mpidr_aff (vcpu); - level0 =MPIDR_AFFINITY_LEVEL (affinity,0 ); - affinity &= ~MPIDR_LEVEL_MASK ; - -/* bail out if the upper three levels don't match */ -if (sgi_aff != affinity) -return -1 ; - -/* Is this VCPU's bit set in the mask ? */ -if (!(sgi_cpu_mask &BIT (level0))) -return -1 ; - -return level0; -}/* * The ICC_SGI* registers encode the affinity differently from the MPIDR,
@@ -1094,9 +1065,11 @@ static void vgic_v3_queue_sgi(struct kvm_vcpu *vcpu, u32 sgi, bool allow_group1)* This will trap in sys_regs.c and call this function. * This ICC_SGI1R_EL1 register contains the upper three affinity levels of the * target processors as well as a bitmask of 16 Aff0 CPUs. -* If the interrupt routing mode bit is not set, we iterate over all VCPUs to -* check for matching ones. If this bit is set, we signal all, but not the -* calling VCPU. +* +* If the interrupt routing mode bit is not set, we iterate over the Aff0 +* bits and signal the VCPUs matching the provided Aff{3,2,1}. +* +* If this bit is set, we signal all, but not the calling VCPU. */ void vgic_v3_dispatch_sgi (struct kvm_vcpu *vcpu,u64 reg,bool allow_group1) {
@@ -1104,7 +1077,7 @@ void vgic_v3_dispatch_sgi(struct kvm_vcpu *vcpu, u64 reg, bool allow_group1)struct kvm_vcpu *c_vcpu;unsigned long target_cpus;u64 mpidr; -u32 sgi; +u32 sgi, aff0;unsigned long c; sgi =FIELD_GET (ICC_SGI1R_SGI_ID_MASK , reg);
@@ -1122,31 +1095,16 @@ void vgic_v3_dispatch_sgi(struct kvm_vcpu *vcpu, u64 reg, bool allow_group1)return ; } +/* We iterate over affinities to find the corresponding vcpus */ mpidr =SGI_AFFINITY_LEVEL (reg,3 ); mpidr |=SGI_AFFINITY_LEVEL (reg,2 ); mpidr |=SGI_AFFINITY_LEVEL (reg,1 ); target_cpus =FIELD_GET (ICC_SGI1R_TARGET_LIST_MASK , reg); -/* -* We iterate over all VCPUs to find the MPIDRs matching the request. -* If we have handled one CPU, we clear its bit to detect early -* if we are already finished. This avoids iterating through all -* VCPUs when most of the times we just signal a single VCPU. -*/ -kvm_for_each_vcpu (c, c_vcpu, kvm) { -int level0; - -/* Exit early if we have dealt with all requested CPUs */ -if (target_cpus ==0 ) -break ; - level0 =match_mpidr (mpidr, target_cpus, c_vcpu); -if (level0 ==-1 ) -continue ; - -/* remove this matching VCPU from the mask */ - target_cpus &= ~BIT (level0); - -vgic_v3_queue_sgi (c_vcpu, sgi, allow_group1); +for_each_set_bit (aff0, &target_cpus,hweight_long (ICC_SGI1R_TARGET_LIST_MASK )) { + c_vcpu =kvm_mpidr_to_vcpu (kvm, mpidr | aff0); +if (c_vcpu) +vgic_v3_queue_sgi (c_vcpu, sgi, allow_group1); } }
Signature · 1 line
2.34.1
Marc Zyngier
maintainerPATCH v3 11/11 KVM: arm64: Clarify the ordering requirements for vcpu/RD creation
In reply to Marc ZyngierIt goes without saying, but it is probably better to spell it out:
If userspace tries to restore and VM, but creates vcpus and/or RDs in a different order, the vcpu/RD mapping will be different. Yes, our API is an ugly piece of crap and I can't believe that we missed this.
If we want to relax the above, we'll need to define a new userspace API that allows the mapping to be specified, rather than relying on the kernel to perform the mapping on its own.
--- Documentation/virt/kvm/devices/arm-vgic-v3.rst | 7 +++++++ 1 file changed, 7 insertions(+)
Documentation/virt/kvm/devices/arm-vgic-v3.rst +7 -0
@@ -59,6 +59,13 @@ Groups: It is invalid to mix calls with KVM_VGIC_V3_ADDR_TYPE_REDIST and KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION attributes. + Note that to obtain reproducible results (the same VCPU being associated + with the same redistributor across a save/restore operation), VCPU creation + order, redistributor region creation order as well as the respective + interleaves of VCPU and region creation MUST be preserved. Any change in + either ordering may result in a different vcpu_id/redistributor association, + resulting in a VM that will fail to run at restore time. + Errors: ======= =============================================================
Signature · 1 line
2.34.1
Oliver Upton
AppliedQuoted 10 lines · Marc Zyngier
This is a follow-up on [2], which addresses both the O(n) SGI injection issue, and cleans up a number of embarassing bugs steaming form the vcpuid/vcpu_idx confusion.
See the changelog below for details.
Oliver, assuming that you haven't changed your mind and that nobody shouts, feel free to queue this in -next.
[...]
Applied to kvmarm/next, thanks!
[01/11] KVM: arm64: vgic: Make kvm_vgic_inject_irq() take a vcpu pointer
https://git.kernel.org/kvmarm/kvmarm/c/9a0a75d3ccee [02/11] KVM: arm64: vgic-its: Treat the collection target address as a vcpu_id https://git.kernel.org/kvmarm/kvmarm/c/d455d366c451 [03/11] KVM: arm64: vgic-v3: Refactor GICv3 SGI generation https://git.kernel.org/kvmarm/kvmarm/c/f3f60a565391 [04/11] KVM: arm64: vgic-v2: Use cpuid from userspace as vcpu_id https://git.kernel.org/kvmarm/kvmarm/c/4e7728c81a54 [05/11] KVM: arm64: vgic: Use vcpu_idx for the debug information https://git.kernel.org/kvmarm/kvmarm/c/ac0fe56d46c0 [06/11] KVM: arm64: Use vcpu_idx for invalidation tracking https://git.kernel.org/kvmarm/kvmarm/c/5f4bd815ec71 [07/11] KVM: arm64: Simplify kvm_vcpu_get_mpidr_aff() https://git.kernel.org/kvmarm/kvmarm/c/0a2acd38d23b [08/11] KVM: arm64: Build MPIDR to vcpu index cache at runtime https://git.kernel.org/kvmarm/kvmarm/c/5544750efd51 [09/11] KVM: arm64: Fast-track kvm_mpidr_to_vcpu() when mpidr_data is available https://git.kernel.org/kvmarm/kvmarm/c/54a8006d0b49 [10/11] KVM: arm64: vgic-v3: Optimize affinity-based SGI injection https://git.kernel.org/kvmarm/kvmarm/c/b5daffb120bb [11/11] KVM: arm64: Clarify the ordering requirements for vcpu/RD creation https://git.kernel.org/kvmarm/kvmarm/c/f9940416f193
--
Best,
Oliver