memblock: don't run loop in memblock_add_range() twice
PATCH v2 1/1 memblock: don't run loop in memblock_add_range() twice
There is round twice in memblock_add_range(). The first counts the number of regions needed to accommodate the new area. The second actually inserts them. But the first round isn't really needed, we just need to check the counts before inserting them.
Check the count before iterate memblock. If the count is equal to the maximum, it needs to resize the array. Otherwise, insert it directly. After that, it's similar logic to memblock_isolate_range.
---
v2: remove the changes of memblock_double_array.
v1: https://lore.kernel.org/all/[email protected]/
--- mm/memblock.c | 75 +++++++++++++++++---------------------------------- 1 file changed, 24 insertions(+), 51 deletions(-)
mm/memblock.c +24 -51
@@ -588,11 +588,11 @@ static int __init_memblock memblock_add_range(struct memblock_type *type, phys_addr_t base, phys_addr_t size, int nid, enum memblock_flags flags) { - bool insert = false; phys_addr_t obase = base;phys_addr_t end = base +memblock_cap_size (base, &size); -int idx, nr_new, start_rgn =-1 , end_rgn; +int idx, start_rgn =-1 , end_rgn;struct memblock_region *rgn; +unsigned long ocnt = type->cnt;if (!size)return 0 ;
@@ -609,23 +609,13 @@ static int __init_memblock memblock_add_range(struct memblock_type *type, }/* -* The worst case is when new range overlaps all existing regions, -* then we'll need type->cnt + 1 empty regions in @type. So if -* type->cnt * 2 + 1 is less than or equal to type->max, we know -* that there is enough empty regions in @type, and we can insert -* regions directly. +* If type->cnt is equal to type->max, it means there's +* not enough empty region and the array needs to be +* resized. Otherwise, insert it directly. */ -if (type->cnt *2 +1 <= type->max) - insert = true; - -repeat: -/* -* The following is executed twice. Once with %false @insert and -* then with %true. The first counts the number of regions needed -* to accommodate the new area. The second actually inserts them. -*/ - base = obase; - nr_new =0 ; +if ((type->cnt == type->max) && +memblock_double_array (type, obase, size)) +return -ENOMEM ;for_each_memblock_type (idx, type, rgn) {phys_addr_t rbase = rgn->base;
@@ -644,15 +634,13 @@ static int __init_memblock memblock_add_range(struct memblock_type *type,WARN_ON (nid !=memblock_get_region_node (rgn));#endif WARN_ON (flags != rgn->flags); - nr_new++; -if (insert) { -if (start_rgn ==-1 ) - start_rgn = idx; - end_rgn = idx +1 ; -memblock_insert_region (type, idx++, base, - rbase - base, nid, - flags); - } + +if (start_rgn ==-1 ) + start_rgn = idx; + end_rgn = idx +1 ; +memblock_insert_region (type, idx++, base, + rbase - base, nid, + flags); }/* area below @rend is dealt with, forget about it */ base =min (rend, end);
@@ -660,33 +648,18 @@ static int __init_memblock memblock_add_range(struct memblock_type *type,/* insert the remaining portion */ if (base < end) { - nr_new++; -if (insert) { -if (start_rgn ==-1 ) - start_rgn = idx; - end_rgn = idx +1 ; -memblock_insert_region (type, idx, base, end - base, - nid, flags); - } - } -if (!nr_new) -return 0 ; +if (start_rgn ==-1 ) + start_rgn = idx; + end_rgn = idx +1 ; +memblock_insert_region (type, idx, base, end - base, + nid, flags); + } -/* -* If this was the first round, resize array and repeat for actual -* insertions; otherwise, merge and return. -*/ -if (!insert) { -while (type->cnt + nr_new > type->max) -if (memblock_double_array (type, obase, size) <0 ) -return -ENOMEM ; - insert = true; - goto repeat; - }else { +if (ocnt != type->cnt)memblock_merge_regions (type, start_rgn, end_rgn); -return 0 ; - } + +return 0 ; }/**
Signature · 1 line
2.25.1
Sorry, there is a bug in this version, please ignore it.
Quoted 131 lines · Yajun Deng
There is round twice in
memblock_add_range(). The first counts the number of regions needed to accommodate the new area. The second actually inserts them. But the first round isn't really needed, we just need to check the counts before inserting them.Check the count before iterate memblock. If the count is equal to the maximum, it needs to resize the array. Otherwise, insert it directly. After that, it's similar logic to
memblock_isolate_range.Signed-off-by Yajun Deng <[email protected]>---
v2: remove the changes ofmemblock_double_array.
v1: https://lore.kernel.org/all/[email protected]/--- mm/memblock.c | 75 +++++++++++++++++---------------------------------- 1 file changed, 24 insertions(+), 51 deletions(-)mm/memblock.c +24
-51@@ -588,11 +588,11 @@ static int __init_memblock memblock_add_range(struct memblock_type *type, phys_addr_t base, phys_addr_t size, int nid, enum memblock_flags flags) { - bool insert = false; phys_addr_t obase = base;phys_addr_t end = base +memblock_cap_size (base, &size); -int idx, nr_new, start_rgn =-1 , end_rgn; +int idx, start_rgn =-1 , end_rgn;struct memblock_region *rgn; +unsigned long ocnt = type->cnt;if (!size)return 0 ;@@ -609,23 +609,13 @@ static int __init_memblock memblock_add_range(struct memblock_type *type, }/* -* The worst case is when new range overlaps all existing regions, -* then we'll need type->cnt + 1 empty regions in @type. So if -* type->cnt * 2 + 1 is less than or equal to type->max, we know -* that there is enough empty regions in @type, and we can insert -* regions directly. +* If type->cnt is equal to type->max, it means there's +* not enough empty region and the array needs to be +* resized. Otherwise, insert it directly. */ -if (type->cnt *2 +1 <= type->max) - insert = true; - -repeat: -/* -* The following is executed twice. Once with %false @insert and -* then with %true. The first counts the number of regions needed -* to accommodate the new area. The second actually inserts them. -*/ - base = obase; - nr_new =0 ; +if ((type->cnt == type->max) && +memblock_double_array (type, obase, size)) +return -ENOMEM ;for_each_memblock_type (idx, type, rgn) {phys_addr_t rbase = rgn->base;@@ -644,15 +634,13 @@ static int __init_memblock memblock_add_range(struct memblock_type *type,WARN_ON (nid !=memblock_get_region_node (rgn));#endif WARN_ON (flags != rgn->flags); - nr_new++; -if (insert) { -if (start_rgn ==-1 ) - start_rgn = idx; - end_rgn = idx +1 ; -memblock_insert_region (type, idx++, base, - rbase - base, nid, - flags); - } + +if (start_rgn ==-1 ) + start_rgn = idx; + end_rgn = idx +1 ; +memblock_insert_region (type, idx++, base, + rbase - base, nid, + flags); }/* area below @rend is dealt with, forget about it */ base =min (rend, end);@@ -660,33 +648,18 @@ static int __init_memblock memblock_add_range(struct memblock_type *type,/* insert the remaining portion */ if (base < end) { - nr_new++; -if (insert) { -if (start_rgn ==-1 ) - start_rgn = idx; - end_rgn = idx +1 ; -memblock_insert_region (type, idx, base, end - base, - nid, flags); - } - } -if (!nr_new) -return 0 ; +if (start_rgn ==-1 ) + start_rgn = idx; + end_rgn = idx +1 ; +memblock_insert_region (type, idx, base, end - base, + nid, flags); + } -/* -* If this was the first round, resize array and repeat for actual -* insertions; otherwise, merge and return. -*/ -if (!insert) { -while (type->cnt + nr_new > type->max) -if (memblock_double_array (type, obase, size) <0 ) -return -ENOMEM ; - insert = true; - goto repeat; - }else { +if (ocnt != type->cnt)memblock_merge_regions (type, start_rgn, end_rgn); -return 0 ; - } + +return 0 ; }/**