rust-cross-canadian: set CARGO_TARGET_<triple>_RUSTFLAGS
PATCH v2 1/3 rust-cross-canadian: set CARGO_TARGET_<triple>_RUSTFLAGS
Avoid setting sdk-wide RUSTFLAGS as these flags only are valid when building for target.
This will enable building for different targets with different RUSTFLAGS.
--- meta/recipes-devtools/rust/rust-cross-canadian.inc | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
meta/recipes-devtools/rust/rust-cross-canadian.inc +3 -1
@@ -54,8 +54,10 @@ do_install () { mkdir "${ENV_SETUP_DIR}" RUST_ENV_SETUP_SH="${ENV_SETUP_DIR}/rust.sh" + RUST_TARGET_TRIPLE=`echo ${RUST_TARGET_SYS} | tr '[:lower:]' '[:upper:]' | sed 's/-/_/g'` + cat <<- EOF > "${RUST_ENV_SETUP_SH}" - export RUSTFLAGS="--sysroot=\$OECORE_TARGET_SYSROOT/usr -C link-arg=--sysroot=\$OECORE_TARGET_SYSROOT" + export CARGO_TARGET_${RUST_TARGET_TRIPLE}_RUSTFLAGS="--sysroot=\$OECORE_TARGET_SYSROOT/usr -C link-arg=--sysroot=\$OECORE_TARGET_SYSROOT" export RUST_TARGET_PATH="\$OECORE_NATIVE_SYSROOT/usr/lib/${TARGET_SYS}/rustlib" EOF
Signature · 1 line
2.42.0
PATCH v2 2/3 rust-cross-canadian: set CARGO_TARGET_<triple>_RUNNER for nativesdk
This will enable us to build and run rust programs on the sdk host.
% cargo run --target x86_64-oesdk-linux-gnu -vv
Fresh hello v0.1.0 (~/development/hello)
Finished dev [unoptimized + debuginfo] target(s) in 0.02s
Running /usr/local/sdk/sysroots/x86_64-oesdk-linux/lib/ld-linux-x86-64.so.2 target/x86_64-oesdk-linux-gnu/debug/hello
Hello, world
--- meta/recipes-devtools/rust/rust-cross-canadian.inc | 3 +++ 1 file changed, 3 insertions(+)
meta/recipes-devtools/rust/rust-cross-canadian.inc +3 -0
@@ -55,9 +55,12 @@ do_install () { RUST_ENV_SETUP_SH="${ENV_SETUP_DIR}/rust.sh" RUST_TARGET_TRIPLE=`echo ${RUST_TARGET_SYS} | tr '[:lower:]' '[:upper:]' | sed 's/-/_/g'` + RUST_HOST_TRIPLE=`echo ${RUST_HOST_SYS} | tr '[:lower:]' '[:upper:]' | sed 's/-/_/g'` + SDKARCH=`echo ${SDK_ARCH} | sed 's/_/-/g'` cat <<- EOF > "${RUST_ENV_SETUP_SH}" export CARGO_TARGET_${RUST_TARGET_TRIPLE}_RUSTFLAGS="--sysroot=\$OECORE_TARGET_SYSROOT/usr -C link-arg=--sysroot=\$OECORE_TARGET_SYSROOT" + export CARGO_TARGET_${RUST_HOST_TRIPLE}_RUNNER="\$OECORE_NATIVE_SYSROOT/lib/ld-linux-${SDKARCH}.so.2" export RUST_TARGET_PATH="\$OECORE_NATIVE_SYSROOT/usr/lib/${TARGET_SYS}/rustlib" EOF
Signature · 1 line
2.42.0
PATCH v2 3/3 oeqa/sdk/rust: Add build and run test of rust binary with SDK host
In reply to Sean NyekjaerAdd a QA test to the SDK to test that a basic cargo build works for the SDK host.
---
Changes since v1:
- use SDK_SYS for compiling for SDK Host
meta/lib/oeqa/sdk/cases/rust.py | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)
meta/lib/oeqa/sdk/cases/rust.py +22 -0
@@ -33,3 +33,25 @@ class RustCompileTest(OESDKTestCase): def test_cargo_build(self): self._run('cd %s/hello; cargo build' % self.tc.sdk_dir) + +class RustHostCompileTest(OESDKTestCase): + td_vars = ['MACHINE', 'SDK_SYS'] + + @classmethod + def setUpClass(self): + targetdir = os.path.join(self.tc.sdk_dir, "hello") + try: + shutil.rmtree(targetdir) + except FileNotFoundError: + pass + shutil.copytree(os.path.join(self.tc.sdk_files_dir, "rust/hello"), targetdir) + + def setUp(self): + machine = self.td.get("MACHINE") + if not self.tc.hasHostPackage("packagegroup-rust-cross-canadian-%s" % machine): + raise unittest.SkipTest("RustCompileTest class: SDK doesn't contain a Rust cross-canadian toolchain") + + def test_cargo_build(self): + sdksys = self.td.get("SDK_SYS") + self._run('cd %s/hello; cargo build --target %s-gnu' % (self.tc.sdk_dir, sdksys)) + self._run('cd %s/hello; cargo run --target %s-gnu' % (self.tc.sdk_dir, sdksys))
Signature · 1 line
2.42.0
Hello,
I believe this series causes this kind of failures:
https://autobuilder.yoctoproject.org/typhoon/#/builders/73/builds/7857/steps/17/logs/stdio
File "/home/pokybuild/yocto-worker/qemux86-64/build/meta/lib/oeqa/sdk/cases/rust.py", line 57, in test_cargo_build
self._run('cd %s/hello; cargo run --target %s-gnu' % (self.tc.sdk_dir, sdksys))
File "/home/pokybuild/yocto-worker/qemux86-64/build/meta/lib/oeqa/sdk/case.py", line 14, in _run
return subprocess.check_output(". %s > /dev/null; %s;" % \
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "/home/pokybuild/yocto-worker/qemux86-64/build/buildtools/sysroots/x86_64-pokysdk-linux/usr/lib/python3.11/subprocess.py", line 466, in check_output
return run(*popenargs, stdout=PIPE, timeout=timeout, check=True,
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/home/pokybuild/yocto-worker/qemux86-64/build/buildtools/sysroots/x86_64-pokysdk-linux/usr/lib/python3.11/subprocess.py", line 571, in run
raise CalledProcessError(retcode, process.args,
oeqa.utils.subprocesstweak.OETestCalledProcessError: Command '. /home/pokybuild/yocto-worker/qemux86-64/build/build/tmp/work/qemux86_64-poky-linux/core-image-sato/1.0/testimage-sdk/environment-setup-core2-64-poky-linux > /dev/null; cd /home/pokybuild/yocto-worker/qemux86-64/build/build/tmp/work/qemux86_64-poky-linux/core-image-sato/1.0/testimage-sdk//hello; cargo run --target i686-pokysdk-linux-gnu;' returned non-zero exit status 101
Standard Output: Finished dev [unoptimized + debuginfo] target(s) in 0.03s
Running `/home/pokybuild/yocto-worker/qemux86-64/build/build/tmp/work/qemux86_64-poky-linux/core-image-sato/1.0/testimage-sdk/sysroots/i686-pokysdk-linux/lib/ld-linux-i686.so.2 target/i686-pokysdk-linux-gnu/debug/hello`
error: could not execute process `/home/pokybuild/yocto-worker/qemux86-64/build/build/tmp/work/qemux86_64-poky-linux/core-image-sato/1.0/testimage-sdk/sysroots/i686-pokysdk-linux/lib/ld-linux-i686.so.2 target/i686-pokysdk-linux-gnu/debug/hello` (never executed) Caused by:
No such file or directory (os error 2)
Quoted 39 lines · Sean Nyekjaer
Avoid setting sdk-wide RUSTFLAGS as these flags only are valid when building for target.
This will enable building for different targets with different RUSTFLAGS.Signed-off-by Sean Nyekjaer <[email protected]>--- meta/recipes-devtools/rust/rust-cross-canadian.inc | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)meta/recipes-devtools/rust/rust-cross-canadian.inc +3
-1@@ -54,8 +54,10 @@ do_install () { mkdir "${ENV_SETUP_DIR}" RUST_ENV_SETUP_SH="${ENV_SETUP_DIR}/rust.sh" + RUST_TARGET_TRIPLE=`echo ${RUST_TARGET_SYS} | tr '[:lower:]' '[:upper:]' | sed 's/-/_/g'` + cat <<- EOF > "${RUST_ENV_SETUP_SH}" - export RUSTFLAGS="--sysroot=\$OECORE_TARGET_SYSROOT/usr -C link-arg=--sysroot=\$OECORE_TARGET_SYSROOT" + export CARGO_TARGET_${RUST_TARGET_TRIPLE}_RUSTFLAGS="--sysroot=\$OECORE_TARGET_SYSROOT/usr -C link-arg=--sysroot=\$OECORE_TARGET_SYSROOT" export RUST_TARGET_PATH="\$OECORE_NATIVE_SYSROOT/usr/lib/${TARGET_SYS}/rustlib" EOFSignature · 11 lines
2.42.0 -=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#188625): https://lists.openembedded.org/g/openembedded-core/message/188625 Mute This Topic: https://lists.openembedded.org/mt/101729592/3617179 Group Owner: [email protected] Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [[email protected]] -=-=-=-=-=-=-=-=-=-=-=-
Signature · 3 lines
Alexandre Belloni, co-owner and COO, Bootlin Embedded Linux and Kernel engineering https://bootlin.com