Skip to contentSkip to conversation

ledtrig-tty: add new state evaluation

PATCH Superseded Florian Eckert 4 participants 19 messages Sep 28, 2023 – Oct 12, 2023

Subsystems (2)

v2 of 9 Superseded Latest is v9 →

lore
Share & tools
lore
#0 lore raw

v2 cover ledtrig-tty: add new state evaluation

Changes in v2:
- rename new function from tty_get_mget() to tty_get_tiocm() as requested by 'Jiri Slaby'.
- As suggested by 'Jiri Slaby', fixed tabs in function documentation throughout the file '/drivers/tty/tty_io.c' in a separate commit.
- Move the variable definition to the top in function 'ledtrig_tty_work()'. This was reported by the 'kernel test robot' after my change in v1.
- Also set the 'max_brightness' to 'blink_brightness' if no 'blink_brightness' was set. This fixes a problem at startup when the brightness is still set to 0 and only 'line_*' is evaluated. I looked in the netdev trigger and that's exactly how it's done there.

v1:
This is a follow-up patchset, based on the mailing list discussion from March 2023 based on the old patchset v7 [1]. I have changed, the LED trigger handling via the sysfs interfaces as suggested by Uwe Kleine-König.

[1]
https://lore.kernel.org/linux-leds/[email protected]/

Florian Eckert (4):
tty: whitespaces in descriptions corrected by replacing tabs with
spaces.
tty: add new helper function tty_get_tiocm
trigger: ledtrig-tty: move variable definition to the top
trigger: ledtrig-tty: add new line mode to triggers

 .../ABI/testing/sysfs-class-led-trigger-tty   |  53 ++++
 drivers/leds/trigger/ledtrig-tty.c            | 280 +++++++++++++++++-
 drivers/tty/tty_io.c                          | 130 ++++----
 include/linux/tty.h                           |   1 +
 4 files changed, 396 insertions(+), 68 deletions(-)
Signature · 1 line
2.30.2
#1 lore raw

PATCH v2 1/4 tty: whitespaces in descriptions corrected by replacing tabs with spaces.

Tabs were used in the function description, to make this look more uniform, the tabs were replaced by spaces where necessary.

---
 drivers/tty/tty_io.c | 102 +++++++++++++++++++++----------------------
 1 file changed, 51 insertions(+), 51 deletions(-)
drivers/tty/tty_io.c +51 -51
index 8a94e5a43c6d..3299a5d50727 100644
@@ -159,7 +159,7 @@ static int tty_fasync(int fd, struct file *filp, int on);
 static void release_tty(struct tty_struct *tty, int idx);
 
 /**
- * free_tty_struct	-	free a disused tty
+ * free_tty_struct - free a disused tty
  * @tty: tty struct to free
  *
  * Free the write buffers, tty queue and tty memory itself.
@@ -233,7 +233,7 @@ static void tty_del_file(struct file *file)
 }
 
 /**
- * tty_name	-	return tty naming
+ * tty_name - return tty naming
  * @tty: tty structure
  *
  * Convert a tty structure into a name. The name reflects the kernel naming
@@ -295,7 +295,7 @@ static void check_tty_count(struct tty_struct *tty, const char *routine)
 }
 
 /**
- * get_tty_driver		-	find device of a tty
+ * get_tty_driver - find device of a tty
  * @device: device identifier
  * @index: returns the index of the tty
  *
@@ -320,7 +320,7 @@ static struct tty_driver *get_tty_driver(dev_t device, int *index)
 }
 
 /**
- * tty_dev_name_to_number	-	return dev_t for device name
+ * tty_dev_name_to_number - return dev_t for device name
  * @name: user space name of device under /dev
  * @number: pointer to dev_t that this function will populate
  *
@@ -372,7 +372,7 @@ EXPORT_SYMBOL_GPL(tty_dev_name_to_number);
 #ifdef CONFIG_CONSOLE_POLL
 
 /**
- * tty_find_polling_driver	-	find device of a polled tty
+ * tty_find_polling_driver - find device of a polled tty
  * @name: name string to match
  * @line: pointer to resulting tty line nr
  *
@@ -505,7 +505,7 @@ static DEFINE_SPINLOCK(redirect_lock);
 static struct file *redirect;
 
 /**
- * tty_wakeup	-	request more data
+ * tty_wakeup - request more data
  * @tty: terminal
  *
  * Internal and external helper for wakeups of tty. This function informs the
@@ -529,7 +529,7 @@ void tty_wakeup(struct tty_struct *tty)
 EXPORT_SYMBOL_GPL(tty_wakeup);
 
 /**
- * tty_release_redirect	-	Release a redirect on a pty if present
+ * tty_release_redirect - Release a redirect on a pty if present
  * @tty: tty device
  *
  * This is available to the pty code so if the master closes, if the slave is a
@@ -550,7 +550,7 @@ static struct file *tty_release_redirect(struct tty_struct *tty)
 }
 
 /**
- * __tty_hangup		-	actual handler for hangup events
+ * __tty_hangup - actual handler for hangup events
  * @tty: tty device
  * @exit_session: if non-zero, signal all foreground group processes
  *
@@ -673,7 +673,7 @@ static void do_tty_hangup(struct work_struct *work)
 }
 
 /**
- * tty_hangup		-	trigger a hangup event
+ * tty_hangup - trigger a hangup event
  * @tty: tty to hangup
  *
  * A carrier loss (virtual or otherwise) has occurred on @tty. Schedule a
@@ -687,7 +687,7 @@ void tty_hangup(struct tty_struct *tty)
 EXPORT_SYMBOL(tty_hangup);
 
 /**
- * tty_vhangup		-	process vhangup
+ * tty_vhangup - process vhangup
  * @tty: tty to hangup
  *
  * The user has asked via system call for the terminal to be hung up. We do
@@ -703,7 +703,7 @@ EXPORT_SYMBOL(tty_vhangup);
 
 
 /**
- * tty_vhangup_self	-	process vhangup for own ctty
+ * tty_vhangup_self - process vhangup for own ctty
  *
  * Perform a vhangup on the current controlling tty
  */
@@ -719,7 +719,7 @@ void tty_vhangup_self(void)
 }
 
 /**
- * tty_vhangup_session	-	hangup session leader exit
+ * tty_vhangup_session - hangup session leader exit
  * @tty: tty to hangup
  *
  * The session leader is exiting and hanging up its controlling terminal.
@@ -735,7 +735,7 @@ void tty_vhangup_session(struct tty_struct *tty)
 }
 
 /**
- * tty_hung_up_p	-	was tty hung up
+ * tty_hung_up_p - was tty hung up
  * @filp: file pointer of tty
  *
  * Return: true if the tty has been subject to a vhangup or a carrier loss
@@ -756,7 +756,7 @@ void __stop_tty(struct tty_struct *tty)
 }
 
 /**
- * stop_tty	-	propagate flow control
+ * stop_tty - propagate flow control
  * @tty: tty to stop
  *
  * Perform flow control to the driver. May be called on an already stopped
@@ -790,7 +790,7 @@ void __start_tty(struct tty_struct *tty)
 }
 
 /**
- * start_tty	-	propagate flow control
+ * start_tty - propagate flow control
  * @tty: tty to start
  *
  * Start a tty that has been stopped if at all possible. If @tty was previously
@@ -898,7 +898,7 @@ static ssize_t iterate_tty_read(struct tty_ldisc *ld, struct tty_struct *tty,
 
 
 /**
- * tty_read	-	read method for tty device files
+ * tty_read - read method for tty device files
  * @iocb: kernel I/O control block
  * @to: destination for the data read
  *
@@ -1091,7 +1091,7 @@ static ssize_t file_tty_write(struct file *file, struct kiocb *iocb, struct iov_
 }
 
 /**
- * tty_write		-	write method for tty device file
+ * tty_write - write method for tty device file
  * @iocb: kernel I/O control block
  * @from: iov_iter with data to write
  *
@@ -1133,7 +1133,7 @@ ssize_t redirected_tty_write(struct kiocb *iocb, struct iov_iter *iter)
 }
 
 /**
- * tty_send_xchar	-	send priority character
+ * tty_send_xchar - send priority character
  * @tty: the tty to send to
  * @ch: xchar to send
  *
@@ -1167,7 +1167,7 @@ int tty_send_xchar(struct tty_struct *tty, char ch)
 }
 
 /**
- * pty_line_name	-	generate name for a pty
+ * pty_line_name - generate name for a pty
  * @driver: the tty driver in use
  * @index: the minor number
  * @p: output buffer of at least 6 bytes
@@ -1188,7 +1188,7 @@ static void pty_line_name(struct tty_driver *driver, int index, char *p)
 }
 
 /**
- * tty_line_name	-	generate name for a tty
+ * tty_line_name - generate name for a tty
  * @driver: the tty driver in use
  * @index: the minor number
  * @p: output buffer of at least 7 bytes
@@ -1239,7 +1239,7 @@ static struct tty_struct *tty_driver_lookup_tty(struct tty_driver *driver,
 }
 
 /**
- * tty_init_termios	-  helper for termios setup
+ * tty_init_termios - helper for termios setup
  * @tty: the tty to set up
  *
  * Initialise the termios structure for this tty. This runs under the
@@ -1322,7 +1322,7 @@ static void tty_driver_remove_tty(struct tty_driver *driver, struct tty_struct *
 }
 
 /**
- * tty_reopen()	- fast re-open of an open tty
+ * tty_reopen() - fast re-open of an open tty
  * @tty: the tty to open
  *
  * Re-opens on master ptys are not allowed and return -%EIO.
@@ -1366,7 +1366,7 @@ static int tty_reopen(struct tty_struct *tty)
 }
 
 /**
- * tty_init_dev		-	initialise a tty device
+ * tty_init_dev - initialise a tty device
  * @driver: tty driver we are opening a device on
  * @idx: device index
  *
@@ -1488,7 +1488,7 @@ void tty_save_termios(struct tty_struct *tty)
 EXPORT_SYMBOL_GPL(tty_save_termios);
 
 /**
- * tty_flush_works	-	flush all works of a tty/pty pair
+ * tty_flush_works - flush all works of a tty/pty pair
  * @tty: tty device to flush works for (or either end of a pty pair)
  *
  * Sync flush all works belonging to @tty (and the 'other' tty).
@@ -1504,7 +1504,7 @@ static void tty_flush_works(struct tty_struct *tty)
 }
 
 /**
- * release_one_tty	-	release tty structure memory
+ * release_one_tty - release tty structure memory
  * @work: work of tty we are obliterating
  *
  * Releases memory associated with a tty structure, and clears out the
@@ -1552,7 +1552,7 @@ static void queue_release_one_tty(struct kref *kref)
 }
 
 /**
- * tty_kref_put		-	release a tty kref
+ * tty_kref_put - release a tty kref
  * @tty: tty device
  *
  * Release a reference to the @tty device and if need be let the kref layer
@@ -1566,7 +1566,7 @@ void tty_kref_put(struct tty_struct *tty)
 EXPORT_SYMBOL(tty_kref_put);
 
 /**
- * release_tty		-	release tty structure memory
+ * release_tty - release tty structure memory
  * @tty: tty device release
  * @idx: index of the tty device release
  *
@@ -1643,7 +1643,7 @@ static int tty_release_checks(struct tty_struct *tty, int idx)
 }
 
 /**
- * tty_kclose      -       closes tty opened by tty_kopen
+ * tty_kclose - closes tty opened by tty_kopen
  * @tty: tty device
  *
  * Performs the final steps to release and free a tty device. It is the same as
@@ -1673,7 +1673,7 @@ void tty_kclose(struct tty_struct *tty)
 EXPORT_SYMBOL_GPL(tty_kclose);
 
 /**
- * tty_release_struct	-	release a tty struct
+ * tty_release_struct - release a tty struct
  * @tty: tty device
  * @idx: index of the tty
  *
@@ -1702,7 +1702,7 @@ void tty_release_struct(struct tty_struct *tty, int idx)
 EXPORT_SYMBOL_GPL(tty_release_struct);
 
 /**
- * tty_release		-	vfs callback for close
+ * tty_release - vfs callback for close
  * @inode: inode of tty
  * @filp: file pointer for handle to tty
  *
@@ -1983,7 +1983,7 @@ static struct tty_struct *tty_kopen(dev_t device, int shared)
 }
 
 /**
- * tty_kopen_exclusive	-	open a tty device for kernel
+ * tty_kopen_exclusive - open a tty device for kernel
  * @device: dev_t of device to open
  *
  * Opens tty exclusively for kernel. Performs the driver lookup, makes sure
@@ -2003,7 +2003,7 @@ struct tty_struct *tty_kopen_exclusive(dev_t device)
 EXPORT_SYMBOL_GPL(tty_kopen_exclusive);
 
 /**
- * tty_kopen_shared	-	open a tty device for shared in-kernel use
+ * tty_kopen_shared - open a tty device for shared in-kernel use
  * @device: dev_t of device to open
  *
  * Opens an already existing tty for in-kernel use. Compared to
@@ -2018,7 +2018,7 @@ struct tty_struct *tty_kopen_shared(dev_t device)
 EXPORT_SYMBOL_GPL(tty_kopen_shared);
 
 /**
- * tty_open_by_driver	-	open a tty device
+ * tty_open_by_driver - open a tty device
  * @device: dev_t of device to open
  * @filp: file pointer to tty
  *
@@ -2086,7 +2086,7 @@ static struct tty_struct *tty_open_by_driver(dev_t device,
 }
 
 /**
- * tty_open	-	open a tty device
+ * tty_open - open a tty device
  * @inode: inode of device file
  * @filp: file pointer to tty
  *
@@ -2180,7 +2180,7 @@ static int tty_open(struct inode *inode, struct file *filp)
 
 
 /**
- * tty_poll	-	check tty status
+ * tty_poll - check tty status
  * @filp: file being polled
  * @wait: poll wait structures to update
  *
@@ -2258,7 +2258,7 @@ static int tty_fasync(int fd, struct file *filp, int on)
 
 static bool tty_legacy_tiocsti __read_mostly = IS_ENABLED(CONFIG_LEGACY_TIOCSTI);
 /**
- * tiocsti		-	fake input character
+ * tiocsti - fake input character
  * @tty: tty to fake input into
  * @p: pointer to character
  *
@@ -2295,7 +2295,7 @@ static int tiocsti(struct tty_struct *tty, char __user *p)
 }
 
 /**
- * tiocgwinsz		-	implement window query ioctl
+ * tiocgwinsz - implement window query ioctl
  * @tty: tty
  * @arg: user buffer for result
  *
@@ -2316,7 +2316,7 @@ static int tiocgwinsz(struct tty_struct *tty, struct winsize __user *arg)
 }
 
 /**
- * tty_do_resize	-	resize event
+ * tty_do_resize - resize event
  * @tty: tty being resized
  * @ws: new dimensions
  *
@@ -2346,7 +2346,7 @@ int tty_do_resize(struct tty_struct *tty, struct winsize *ws)
 EXPORT_SYMBOL(tty_do_resize);
 
 /**
- * tiocswinsz		-	implement window size set ioctl
+ * tiocswinsz - implement window size set ioctl
  * @tty: tty side of tty
  * @arg: user buffer for result
  *
@@ -2373,7 +2373,7 @@ static int tiocswinsz(struct tty_struct *tty, struct winsize __user *arg)
 }
 
 /**
- * tioccons	-	allow admin to move logical console
+ * tioccons - allow admin to move logical console
  * @file: the file to become console
  *
  * Allow the administrator to move the redirected console device.
@@ -2412,7 +2412,7 @@ static int tioccons(struct file *file)
 }
 
 /**
- * tiocsetd	-	set line discipline
+ * tiocsetd - set line discipline
  * @tty: tty device
  * @p: pointer to user data
  *
@@ -2434,7 +2434,7 @@ static int tiocsetd(struct tty_struct *tty, int __user *p)
 }
 
 /**
- * tiocgetd	-	get line discipline
+ * tiocgetd - get line discipline
  * @tty: tty device
  * @p: pointer to user data
  *
@@ -2457,7 +2457,7 @@ static int tiocgetd(struct tty_struct *tty, int __user *p)
 }
 
 /**
- * send_break	-	performed time break
+ * send_break - performed time break
  * @tty: device to break on
  * @duration: timeout in mS
  *
@@ -2495,7 +2495,7 @@ static int send_break(struct tty_struct *tty, unsigned int duration)
 }
 
 /**
- * tty_tiocmget		-	get modem status
+ * tty_tiocmget - get modem status
  * @tty: tty device
  * @p: pointer to result
  *
@@ -2518,7 +2518,7 @@ static int tty_tiocmget(struct tty_struct *tty, int __user *p)
 }
 
 /**
- * tty_tiocmset		-	set modem status
+ * tty_tiocmset - set modem status
  * @tty: tty device
  * @cmd: command - clear bits, set bits or set all
  * @p: pointer to desired bits
@@ -2559,7 +2559,7 @@ static int tty_tiocmset(struct tty_struct *tty, unsigned int cmd,
 }
 
 /**
- * tty_get_icount	-	get tty statistics
+ * tty_get_icount - get tty statistics
  * @tty: tty device
  * @icount: output parameter
  *
@@ -3122,7 +3122,7 @@ struct tty_struct *alloc_tty_struct(struct tty_driver *driver, int idx)
 }
 
 /**
- * tty_put_char	- write one character to a tty
+ * tty_put_char - write one character to a tty
  * @tty: tty
  * @ch: character to write
  *
@@ -3300,7 +3300,7 @@ void tty_unregister_device(struct tty_driver *driver, unsigned index)
 EXPORT_SYMBOL(tty_unregister_device);
 
 /**
- * __tty_alloc_driver -- allocate tty driver
+ * __tty_alloc_driver - allocate tty driver
  * @lines: count of lines this driver can handle at most
  * @owner: module which is responsible for this driver
  * @flags: some of %TTY_DRIVER_ flags, will be set in driver->flags
@@ -3393,7 +3393,7 @@ static void destruct_tty_driver(struct kref *kref)
 }
 
 /**
- * tty_driver_kref_put -- drop a reference to a tty driver
+ * tty_driver_kref_put - drop a reference to a tty driver
  * @driver: driver of which to drop the reference
  *
  * The final put will destroy and free up the driver.
@@ -3405,7 +3405,7 @@ void tty_driver_kref_put(struct tty_driver *driver)
 EXPORT_SYMBOL(tty_driver_kref_put);
 
 /**
- * tty_register_driver -- register a tty driver
+ * tty_register_driver - register a tty driver
  * @driver: driver to register
  *
  * Called by a tty driver to register itself.
@@ -3470,7 +3470,7 @@ int tty_register_driver(struct tty_driver *driver)
 EXPORT_SYMBOL(tty_register_driver);
 
 /**
- * tty_unregister_driver -- unregister a tty driver
+ * tty_unregister_driver - unregister a tty driver
  * @driver: driver to unregister
  *
  * Called by a tty driver to unregister itself.
Signature · 1 line
2.30.2
maintainer Reviewed-by on v2 1/4
#2 lore raw

Re: [PATCH v2 1/4] tty: whitespaces in descriptions corrected by replacing tabs with spaces.

Quoted 4 lines · Florian Eckert

Tabs were used in the function description, to make this look more uniform, the tabs were replaced by spaces where necessary.

thanks,

Signature · 2 lines
js
suse labs
#3 lore raw

PATCH v2 2/4 tty: add new helper function tty_get_tiocm

In reply to Florian Eckert

The struct 'tty_struct' has a callback to read the status flags of the tty if the tty driver provides them. So fare, the data is transferred directly to userspace with the function 'tty_tiocmget'. This function cannot be used to evaluate the status line of the tty interface in the ledtrig-tty trigger. To make this possible, a new function must be added that does not immediately pass the data on to userspace.

The new function 'tty_get_tiocm' only returns the status register. This information can then be processed further in the ledtrig-tty trigger.

---
 drivers/tty/tty_io.c | 28 ++++++++++++++++++++++------
 include/linux/tty.h  |  1 +
 2 files changed, 23 insertions(+), 6 deletions(-)
drivers/tty/tty_io.c +22 -6
index 3299a5d50727..a12f63854ac4 100644
@@ -2494,6 +2494,24 @@ static int send_break(struct tty_struct *tty, unsigned int duration)
 	return retval;
 }
 
+/**
+ * tty_get_tiocm - get tiocm status register
+ * @tty: tty device
+ *
+ * Obtain the modem status bits from the tty driver if the feature
+ * is supported.
+ */
+int tty_get_tiocm(struct tty_struct *tty)
+{
+	int retval = -ENOTTY;
+
+	if (tty->ops->tiocmget)
+		retval = tty->ops->tiocmget(tty);
+
+	return retval;
+}
+EXPORT_SYMBOL_GPL(tty_get_tiocm);
+
 /**
  * tty_tiocmget - get modem status
  * @tty: tty device
@@ -2506,14 +2524,12 @@ static int send_break(struct tty_struct *tty, unsigned int duration)
  */
 static int tty_tiocmget(struct tty_struct *tty, int __user *p)
 {
-	int retval = -ENOTTY;
+	int retval;
 
-	if (tty->ops->tiocmget) {
-		retval = tty->ops->tiocmget(tty);
+	retval = tty_get_tiocm(tty);
+	if (retval >= 0)
+		retval = put_user(retval, p);
 
-		if (retval >= 0)
-			retval = put_user(retval, p);
-	}
 	return retval;
 }
 
include/linux/tty.h +1 -0
index f002d0f25db7..8e4d0b3b12b7 100644
@@ -421,6 +421,7 @@ int tty_unthrottle_safe(struct tty_struct *tty);
 int tty_do_resize(struct tty_struct *tty, struct winsize *ws);
 int tty_get_icount(struct tty_struct *tty,
 		struct serial_icounter_struct *icount);
+int tty_get_tiocm(struct tty_struct *tty);
 int is_current_pgrp_orphaned(void);
 void tty_hangup(struct tty_struct *tty);
 void tty_vhangup(struct tty_struct *tty);
Signature · 1 line
2.30.2
#4 lore raw

PATCH v2 3/4 trigger: ledtrig-tty: move variable definition to the top

In reply to Florian Eckert

The Intel build robot has complained about this. Hence move the commit of the variable definition to the beginning of the function.

---
 drivers/leds/trigger/ledtrig-tty.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/leds/trigger/ledtrig-tty.c +1 -2
index 8ae0d2d284af..1c6fadf0b856 100644
@@ -82,6 +82,7 @@ static void ledtrig_tty_work(struct work_struct *work)
 {
 	struct ledtrig_tty_data *trigger_data =
 		container_of(work, struct ledtrig_tty_data, dwork.work);
+	unsigned long interval = LEDTRIG_TTY_INTERVAL;
 	struct serial_icounter_struct icount;
 	int ret;
 
@@ -124,8 +125,6 @@ static void ledtrig_tty_work(struct work_struct *work)
 
 	if (icount.rx != trigger_data->rx ||
 	    icount.tx != trigger_data->tx) {
-		unsigned long interval = LEDTRIG_TTY_INTERVAL;
-
 		led_blink_set_oneshot(trigger_data->led_cdev, &interval,
 				      &interval, 0);
 
Signature · 1 line
2.30.2
maintainer
#5 lore raw

Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top

Quoted 1 line · Florian Eckert

The Intel build robot has complained about this.

How exactly?

Quoted 22 lines

Hence move the commit
of the variable definition to the beginning of the function.

---
  drivers/leds/trigger/ledtrig-tty.c | 3 +--
  1 file changed, 1 insertion(+), 2 deletions(-)
drivers/leds/trigger/ledtrig-tty.c +1 -0
index 8ae0d2d284af..1c6fadf0b856 100644
@@ -82,6 +82,7 @@ static void ledtrig_tty_work(struct work_struct *work)
  {
  	struct ledtrig_tty_data *trigger_data =
  		container_of(work, struct ledtrig_tty_data, dwork.work);
+	unsigned long interval = LEDTRIG_TTY_INTERVAL;
  	struct serial_icounter_struct icount;
  	int ret;
 

drivers/leds/trigger/ledtrig-tty.c static void ledtrig_tty_work(struct work_struct *work) · line 127

Quoted 4 lines
drivers/leds/trigger/ledtrig-tty.c +0 -1
@@ -124,8 +125,6 @@ static void ledtrig_tty_work(struct work_struct *work)
 
  	if (icount.rx != trigger_data->rx ||
  	    icount.tx != trigger_data->tx) {
-		unsigned long interval = LEDTRIG_TTY_INTERVAL;

It's in a block, so what's the matter?

Quoted 3 lines
drivers/leds/trigger/ledtrig-tty.c +0 -0
  		led_blink_set_oneshot(trigger_data->led_cdev, &interval,
  				      &interval, 0);
 
Signature · 2 lines
js
suse labs
maintainer
#6 lore raw

Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top

In reply to Florian Eckert
Quoted 2 lines · Florian Eckert

The Intel build robot has complained about this. Hence move the commit of the variable definition to the beginning of the function.

Please copy the robot's error message into the commit message.

Quoted 30 lines
---
 drivers/leds/trigger/ledtrig-tty.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/leds/trigger/ledtrig-tty.c +1 -2
index 8ae0d2d284af..1c6fadf0b856 100644
@@ -82,6 +82,7 @@ static void ledtrig_tty_work(struct work_struct *work)
 {
 	struct ledtrig_tty_data *trigger_data =
 		container_of(work, struct ledtrig_tty_data, dwork.work);
+	unsigned long interval = LEDTRIG_TTY_INTERVAL;
 	struct serial_icounter_struct icount;
 	int ret;
 
@@ -124,8 +125,6 @@ static void ledtrig_tty_work(struct work_struct *work)
 
 	if (icount.rx != trigger_data->rx ||
 	    icount.tx != trigger_data->tx) {
-		unsigned long interval = LEDTRIG_TTY_INTERVAL;
-
 		led_blink_set_oneshot(trigger_data->led_cdev, &interval,
 				      &interval, 0);
 
Signature · 1 line
2.30.2
Signature · 1 line
Lee Jones [李琼斯]
maintainer
#7 lore raw

Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top

Quoted 6 lines · Lee Jones
Quoted 2 lines · Florian Eckert

The Intel build robot has complained about this. Hence move the commit of the variable definition to the beginning of the function.

Please copy the robot's error message into the commit message.

Ah, lkp, then also the Closes: line as it suggests.

Quoted 31 lines
Quoted 30 lines
---
  drivers/leds/trigger/ledtrig-tty.c | 3 +--
  1 file changed, 1 insertion(+), 2 deletions(-)
drivers/leds/trigger/ledtrig-tty.c +1 -2
index 8ae0d2d284af..1c6fadf0b856 100644
@@ -82,6 +82,7 @@ static void ledtrig_tty_work(struct work_struct *work)
  {
  	struct ledtrig_tty_data *trigger_data =
  		container_of(work, struct ledtrig_tty_data, dwork.work);
+	unsigned long interval = LEDTRIG_TTY_INTERVAL;
  	struct serial_icounter_struct icount;
  	int ret;
 
@@ -124,8 +125,6 @@ static void ledtrig_tty_work(struct work_struct *work)
 
  	if (icount.rx != trigger_data->rx ||
  	    icount.tx != trigger_data->tx) {
-		unsigned long interval = LEDTRIG_TTY_INTERVAL;
-
  		led_blink_set_oneshot(trigger_data->led_cdev, &interval,
  				      &interval, 0);
 
Signature · 1 line
2.30.2
Signature · 2 lines
js
suse labs
#8 lore raw

Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top

Quoted 7 lines · Jiri Slaby
Quoted 6 lines · Lee Jones
Quoted 2 lines · Florian Eckert

The Intel build robot has complained about this. Hence move the commit of the variable definition to the beginning of the function.

Please copy the robot's error message into the commit message.

For a v3 patch-set I will add the error message from build robot.

Build robot output of my v1 change:
https://lore.kernel.org/linux-leds/[email protected]/T/#m777371c5de8fadc505a833139b8ae69ac7fa8dab

I decided to move the variable definition with a separate commit to the top of the function, to make the build robot happy. After that I made my changes for v2 to the ledtrig-tty to add the feature.

Quoted 1 line

Ah, lkp, then also the Closes: line as it suggests.

Sorry I do not understand your statement

Quoted 29 lines
Quoted 29 lines
Quoted 28 lines
---
  drivers/leds/trigger/ledtrig-tty.c | 3 +--
  1 file changed, 1 insertion(+), 2 deletions(-)
drivers/leds/trigger/ledtrig-tty.c +1 -0
index 8ae0d2d284af..1c6fadf0b856 100644
@@ -82,6 +82,7 @@ static void ledtrig_tty_work(struct work_struct 
 *work)
  {
  	struct ledtrig_tty_data *trigger_data =
  		container_of(work, struct ledtrig_tty_data, dwork.work);
+	unsigned long interval = LEDTRIG_TTY_INTERVAL;
  	struct serial_icounter_struct icount;
  	int ret;

@@ -124,8 +125,6 @@ static void ledtrig_tty_work(struct work_struct
*work)

    	if (icount.rx != trigger_data->rx ||

icount.tx != trigger_data->tx) {

drivers/leds/trigger/ledtrig-tty.c +0 -2
-		unsigned long interval = LEDTRIG_TTY_INTERVAL;
-
  		led_blink_set_oneshot(trigger_data->led_cdev, &interval,
  				      &interval, 0);
  -- 2.30.2
maintainer
#9 lore raw

Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top

Quoted 14 lines · Florian Eckert
Quoted 7 lines · Jiri Slaby
Quoted 6 lines · Lee Jones
Quoted 2 lines · Florian Eckert

The Intel build robot has complained about this. Hence move the commit of the variable definition to the beginning of the function.

Please copy the robot's error message into the commit message.

For a v3 patch-set I will add the error message from build robot.

Build robot output of my v1 change:
https://lore.kernel.org/linux-leds/[email protected]/T/#m777371c5de8fadc505a833139b8ae69ac7fa8dab

Quoted 7 lines

I decided to move the variable definition with a separate commit to the top of the function, to make the build robot happy. After that I made my changes for v2 to the ledtrig-tty to add the feature.

Quoted 1 line

Ah, lkp, then also the Closes: line as it suggests.

Sorry I do not understand your statement

The link you pasted above states:
=======
If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
=======

So please follow that suggestion ;).

thanks,

Signature · 2 lines
js
suse labs
#10 lore raw

Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top

Quoted 19 lines
Quoted 9 lines

I decided to move the variable definition with a separate commit to the top of the function, to make the build robot happy. After that I made my changes for v2 to the ledtrig-tty to add the feature.

Quoted 1 line

Ah, lkp, then also the Closes: line as it suggests.

Sorry I do not understand your statement

The link you pasted above states:
=======
If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes:
https://lore.kernel.org/oe-kbuild-all/[email protected]/
=======

Quoted 1 line

So please follow that suggestion ;).

Ok, I understand, thanks will to this on a v3 patchset.
I will now wait for the comments of my changes in ledtrig-tty from the led subsystem. And then I will send a new patch set with the requested changes.

Sorry for the silly question. But do I have to send this patch again for a v3?
https://lore.kernel.org/linux-leds/[email protected]/T/#u
It was already marked by you with a Reviewed-by: from you?

--
Best regards
Florian

maintainer
#11 lore raw

Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top

Quoted 3 lines · Florian Eckert

Sorry for the silly question. But do I have to send this patch again for a v3?
https://lore.kernel.org/linux-leds/[email protected]/T/#u
It was already marked by you with a Reviewed-by: from you?

If it is not picked up by Greg by then, I would send it with my rev-b already.

thanks,

Signature · 2 lines
js
suse labs
maintainer
#12 lore raw

Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top

In reply to Florian Eckert
Quoted 27 lines · Florian Eckert
Quoted 20 lines
Quoted 9 lines

I decided to move the variable definition with a separate commit to the top of the function, to make the build robot happy. After that I made my changes for v2 to the ledtrig-tty to add the feature.

Quoted 1 line

Ah, lkp, then also the Closes: line as it suggests.

Sorry I do not understand your statement

The link you pasted above states:
=======
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes:
https://lore.kernel.org/oe-kbuild-all/[email protected]/
=======

Quoted 1 line

So please follow that suggestion ;).

Ok, I understand, thanks will to this on a v3 patchset.
I will now wait for the comments of my changes in ledtrig-tty from the led subsystem.
And then I will send a new patch set with the requested changes.

Quoted 4 lines

Sorry for the silly question. But do I have to send this patch again for a v3?
https://lore.kernel.org/linux-leds/[email protected]/T/#u
It was already marked by you with a Reviewed-by: from you?

This series is long gone from my review queue, so a v3 will be needed at the very least.

thanks,

greg k-h

maintainer
#13 lore raw

Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top

Quoted 28 lines · Greg KH
Quoted 27 lines · Florian Eckert
Quoted 20 lines
Quoted 9 lines

I decided to move the variable definition with a separate commit to the top of the function, to make the build robot happy. After that I made my changes for v2 to the ledtrig-tty to add the feature.

Quoted 1 line

Ah, lkp, then also the Closes: line as it suggests.

Sorry I do not understand your statement

The link you pasted above states:
=======
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes:
https://lore.kernel.org/oe-kbuild-all/[email protected]/
=======

Quoted 1 line

So please follow that suggestion ;).

Ok, I understand, thanks will to this on a v3 patchset.
I will now wait for the comments of my changes in ledtrig-tty from the led subsystem.
And then I will send a new patch set with the requested changes.

Quoted 4 lines
Quoted 4 lines

Sorry for the silly question. But do I have to send this patch again for a v3?
https://lore.kernel.org/linux-leds/[email protected]/T/#u
It was already marked by you with a Reviewed-by: from you?

Yes please. I will pick this up as a set once it's ready.

Quoted 2 lines

This series is long gone from my review queue, so a v3 will be needed at the very least.

Nothing for Greg to worry about here (unless you *want* to review).

Signature · 1 line
Lee Jones [李琼斯]
maintainer
#14 lore raw

Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top

Quoted 35 lines · Lee Jones
Quoted 28 lines · Greg KH
Quoted 27 lines · Florian Eckert
Quoted 20 lines
Quoted 9 lines

I decided to move the variable definition with a separate commit to the top of the function, to make the build robot happy. After that I made my changes for v2 to the ledtrig-tty to add the feature.

Quoted 1 line

Ah, lkp, then also the Closes: line as it suggests.

Sorry I do not understand your statement

The link you pasted above states:
=======
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes:
https://lore.kernel.org/oe-kbuild-all/[email protected]/
=======

Quoted 1 line

So please follow that suggestion ;).

Ok, I understand, thanks will to this on a v3 patchset.
I will now wait for the comments of my changes in ledtrig-tty from the led subsystem.
And then I will send a new patch set with the requested changes.

Quoted 4 lines
Quoted 4 lines

Sorry for the silly question. But do I have to send this patch again for a v3?
https://lore.kernel.org/linux-leds/[email protected]/T/#u
It was already marked by you with a Reviewed-by: from you?

Quoted 6 lines

Yes please. I will pick this up as a set once it's ready.

Quoted 2 lines

This series is long gone from my review queue, so a v3 will be needed at the very least.

Nothing for Greg to worry about here (unless you *want* to review).

Yes, I want to ensure that the tty change is correct, last round I didn't think it was...

thanks,

greg k-h

maintainer
#15 lore raw

Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top

Quoted 38 lines · Greg KH
Quoted 37 lines · Lee Jones
Quoted 28 lines · Greg KH
Quoted 27 lines · Florian Eckert
Quoted 20 lines
Quoted 9 lines

I decided to move the variable definition with a separate commit to the top of the function, to make the build robot happy. After that I made my changes for v2 to the ledtrig-tty to add the feature.

Quoted 1 line

Ah, lkp, then also the Closes: line as it suggests.

Sorry I do not understand your statement

The link you pasted above states:
=======
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes:
https://lore.kernel.org/oe-kbuild-all/[email protected]/
=======

Quoted 1 line

So please follow that suggestion ;).

Ok, I understand, thanks will to this on a v3 patchset.
I will now wait for the comments of my changes in ledtrig-tty from the led subsystem.
And then I will send a new patch set with the requested changes.

Quoted 4 lines
Quoted 4 lines

Sorry for the silly question. But do I have to send this patch again for a v3?
https://lore.kernel.org/linux-leds/[email protected]/T/#u
It was already marked by you with a Reviewed-by: from you?

Yes please. I will pick this up as a set once it's ready.

Quoted 7 lines
Quoted 4 lines
Quoted 2 lines

This series is long gone from my review queue, so a v3 will be needed at the very least.

Nothing for Greg to worry about here (unless you *want* to review).

Yes, I want to ensure that the tty change is correct, last round I didn't think it was...

Sounds good, thanks.

Signature · 1 line
Lee Jones [李琼斯]
#16 lore raw

Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top

In reply to Lee Jones

Hello Lee,

I only got reviews for the fixes and preparations for commits that change the tty subsystem, but no reaction from the maintainer of the feature I want to add to ledtrig-tty for v1 and v2 patchset.

How should I proceed? Send a v3 with the the requested changes.

[Patch v2 1/4]: https://lore.kernel.org/linux-leds/[email protected]/T/#m913d3822465f35b54dfa24b1dfe4d50e61352980
Change got a 'Reviewed-by: Jiri Slaby <[email protected]>'.
Will add this to an upcoming v3 again.

[Patch v2 2/4] : https://lore.kernel.org/linux-leds/[email protected]/T/#m7ee7618894a66fd3c89bed488a2394265a3f8df1
I missed to add the robot error message to the commit message and also missed
to add the the following 'Reported-by: kernel test robot <[email protected]>' and
'Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/'
to the commit message. Will add this to an upcoming v3.

And do not wait for the review of the following patches.
https://lore.kernel.org/linux-leds/[email protected]/T/#mc0ecb912fa0e59015ad0a9b4cb491ae9f18c1ea9
https://lore.kernel.org/linux-leds/[email protected]/T/#mba36217323c386ecd900e188bbdf6276c3c96c91

---

Florian

maintainer
#17 lore raw

Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top

Quoted 22 lines · Florian Eckert

Hello Lee,

I only got reviews for the fixes and preparations for commits that change the
tty subsystem, but no reaction from the maintainer of the feature I want to add to ledtrig-tty for v1 and v2 patchset.

How should I proceed? Send a v3 with the the requested changes.

[Patch v2 1/4]: https://lore.kernel.org/linux-leds/[email protected]/T/#m913d3822465f35b54dfa24b1dfe4d50e61352980
Change got a 'Reviewed-by: Jiri Slaby <[email protected]>'.
Will add this to an upcoming v3 again.

[Patch v2 2/4] : https://lore.kernel.org/linux-leds/[email protected]/T/#m7ee7618894a66fd3c89bed488a2394265a3f8df1
I missed to add the robot error message to the commit message and also
missed
to add the the following 'Reported-by: kernel test robot <[email protected]>'
and
'Closes:
https://lore.kernel.org/oe-kbuild-all/[email protected]/'
to the commit message. Will add this to an upcoming v3.

Quoted 3 lines

And do not wait for the review of the following patches.
https://lore.kernel.org/linux-leds/[email protected]/T/#mc0ecb912fa0e59015ad0a9b4cb491ae9f18c1ea9
https://lore.kernel.org/linux-leds/[email protected]/T/#mba36217323c386ecd900e188bbdf6276c3c96c91

Yes. I've removed this from my queue.

Better to resend it with the fixes.

Signature · 1 line
Lee Jones [李琼斯]
#18 lore raw

PATCH v2 4/4 trigger: ledtrig-tty: add new line mode to triggers

In reply to Florian Eckert

Until now, the LED blinks when data is sent via the tty (rx/tx). The serial tty interface also supports additional input signals, that can also be evaluated within this trigger. This change is adding the following additional input sources, which could be controlled
via the '/sys/class/<leds>/' sysfs interface.

- line_cts:
DCE is ready to accept data from the DTE (Clear To Send). If the line state is detected, the LED is switched on.
If set to 0 (default), the LED will not evaluate CTS.
If set to 1, the LED will evaluate CTS.

- line_dsr:
DCE is ready to receive and send data (Data Set Ready). If the line state is detected, the LED is switched on.
If set to 0 (default), the LED will not evaluate DSR.
If set to 1, the LED will evaluate DSR.

- line_car:
DTE is receiving a carrier from the DCE (Data Carrier Detect). If the line state is detected, the LED is switched on.
If set to 0 (default), the LED will not evaluate CAR (DCD). If set to 1, the LED will evaluate CAR (DCD).

- line_rng:
DCE has detected an incoming ring signal on the telephone line (Ring Indicator). If the line state is detected, the LED is switched on. If set to 0 (default), the LED will not evaluate RNG (RI). If set to 1, the LED will evaluate RNG (RI).

In addition to the new line_* entries in sysfs, the indication for the direction of the transmitted data is independently controllable via the new rx and tx sysfs entrie now too. These are on by default. Thus the trigger behaves as before this change.

- rx:
Signal reception (rx) of data on the named tty device. If set to 0, the LED will not blink on reception. If set to 1 (default), the LED will blink on reception.

- tx:
Signal transmission (tx) of data on the named tty device. If set to 0, the LED will not blink on transmission. If set to 1 (default), the LED will blink on transmission.

---
 .../ABI/testing/sysfs-class-led-trigger-tty   |  53 ++++
 drivers/leds/trigger/ledtrig-tty.c            | 279 +++++++++++++++++-
 2 files changed, 322 insertions(+), 10 deletions(-)
Documentation/ABI/testing/sysfs-class-led-trigger-tty +53 -0
index 2bf6b24e781b..e1f578ac8656 100644
@@ -4,3 +4,56 @@ KernelVersion:	5.10
 Contact:	[email protected]
 Description:
 		Specifies the tty device name of the triggering tty
+
+What:		/sys/class/leds/<led>/rx
+Date:		September 2023
+KernelVersion:	6.7
+Description:
+		Signal reception (rx) of data on the named tty device.
+		If set to 0, the LED will not blink on reception.
+		If set to 1 (default), the LED will blink on reception.
+
+What:		/sys/class/leds/<led>/tx
+Date:		September 2023
+KernelVersion:	6.7
+Description:
+		Signal transmission (tx) of data on the named tty device.
+		If set to 0, the LED will not blink on transmission.
+		If set to 1 (default), the LED will blink on transmission.
+
+What:		/sys/class/leds/<led>/line_cts
+Date:		September 2023
+KernelVersion:	6.7
+Description:
+		DCE is ready to accept data from the DTE (Clear To Send). If
+		the line state is detected, the LED is switched on.
+		If set to 0 (default), the LED will not evaluate CTS.
+		If set to 1, the LED will evaluate CTS.
+
+What:		/sys/class/leds/<led>/line_dsr
+Date:		September 2023
+KernelVersion:	6.7
+Description:
+		DCE is ready to receive and send data (Data Set Ready). If
+		the line state is detected, the LED is switched on.
+		If set to 0 (default), the LED will not evaluate DSR.
+		If set to 1, the LED will evaluate DSR.
+
+What:		/sys/class/leds/<led>/line_car
+Date:		September 2023
+KernelVersion:	6.7
+Description:
+		DTE is receiving a carrier from the DCE (Data Carrier Detect).
+		If the line state is detected, the LED is switched on.
+		If set to 0 (default), the LED will not evaluate CAR (DCD).
+		If set to 1, the LED will evaluate CAR (DCD).
+
+What:		/sys/class/leds/<led>/line_rng
+Date:		September 2023
+KernelVersion:	6.7
+Description:
+		DCE has detected an incoming ring signal on the telephone
+		line (Ring Indicator). If the line state is detected, the
+		LED is switched on.
+		If set to 0 (default), the LED will not evaluate RNG (RI).
+		If set to 1, the LED will evaluate RNG (RI).
drivers/leds/trigger/ledtrig-tty.c +269 -10

321 lines not on this page · raw message

Signature · 1 line
2.30.2