board: ti: am6x: Switch to standard boot
v2 cover board: ti: am6x: Switch to standard boot
Hi,
This series switches am64x to standard boot flow.
Also minor fix to am62x boot targets.
NOTE:
Tested on AM64x GP EVM but I had to hand edit the grub.cfg file provided with the TI release [1]
from,
menuentry 'boot'{
linux /Image root=PARTUUID=3a4a99a8-02 rootwait rootfstype=ext4 }
to,
menuentry 'boot'{
linux /Image console=ttyS2,115200n8 root=PARTUUID=3a4a99a8-02 rootwait rootfstype=ext4 }
else there is no console output.
cheers,
-roger
Changelog:
v2:
- Added Nishanth's Reviewed-by for patch 1
- Dropped unnecessary headers and macro from patch 2
Roger Quadros (2):
board: ti: am62x: am62x.env: Fix boot_targets
board: ti: am64x: Switch to standard boot flow
board/ti/am62x/am62x.env | 2 +- board/ti/am64x/am64x.env | 1 + configs/am64x_evm_a53_defconfig | 5 +++-- include/configs/am64x_evm.h | 9 --------- 4 files changed, 5 insertions(+), 12 deletions(-)
base-commit: e29b932aa07fa0226d325b35d96cd4eea0370129
prerequisite-patch-id: afb49f33f198747451687f83936f039049365924
prerequisite-patch-id: 1d8297eb0a3b44d8578cae785cc22f0fb6077239
prerequisite-patch-id: 4ae9fdc0b3737e55289a78a59d546a08c03d62e5
prerequisite-patch-id: 2be0e0caf153bec2c453b2f21342ba207c1ee13d
prerequisite-patch-id: 7710703ce9a41b72ff3fb89abf0823625a5b5454
prerequisite-patch-id: 60d61440bf0ab8c0bea8b971ef18aa6d0d26e113
prerequisite-patch-id: c974e6d80489cbb0ee8cc1f3e19bcc9cf47f25b6
Signature · 1 line
2.34.1
PATCH v2 1/2 board: ti: am62x: am62x.env: Fix boot_targets
ti_mmc is not a valid boot_target for standard boot flow so remove it. Prefer mmc1 (sd-card) over mmc0 (emmc).
--- board/ti/am62x/am62x.env | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
board/ti/am62x/am62x.env +1 -1
@@ -8,7 +8,7 @@ args_all=setenv optargs ${optargs} earlycon=ns16550a,mmio32,0x02800000 ${mtdparts} run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr} -boot_targets=ti_mmc mmc0 mmc1 usb pxe dhcp +boot_targets=mmc1 mmc0 usb pxe dhcp boot=mmc mmcdev=1 bootpart=1:2
Signature · 1 line
2.34.1
Re: [PATCH v2 1/2] board: ti: am62x: am62x.env: Fix boot_targets
Quoted 5 lines · Roger Quadros
ti_mmcis not a validboot_targetfor standard boot flow so remove it. Prefer mmc1 (sd-card) over mmc0 (emmc).Signed-off-by Roger Quadros <[email protected]>Reviewed-by Nishanth Menon <[email protected]>
Applied to u-boot/master, thanks!
Signature · 1 line
Tom
PATCH v2 2/2 board: ti: am64x: Switch to standard boot flow
In reply to Roger QuadrosSwitch to using bootstd. Note with this change, we will stop using distro_bootcmd and instead depend entirely on bootflow method of starting the system up.
Drop header files that are no longer needed in am64x_evm.h. k3_dfu.h is available via k3_dfu.env in am64x.env.
Drop unused macro CFG_SYS_SDRAM_BASE1.
--- board/ti/am64x/am64x.env | 1 + configs/am64x_evm_a53_defconfig | 5 +++-- include/configs/am64x_evm.h | 9 --------- 3 files changed, 4 insertions(+), 11 deletions(-)
board/ti/am64x/am64x.env +1 -0
@@ -15,6 +15,7 @@ console=ttyS2,115200n8 args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 ${mtdparts} run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr} +boot_targets=mmc1 mmc0 usb pxe dhcp boot=mmc mmcdev=1 bootpart=1:2
configs/am64x_evm_a53_defconfig +3 -2
@@ -31,8 +31,9 @@ CONFIG_SPL_SPI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000 -CONFIG_DISTRO_DEFAULTS=y -CONFIG_BOOTCOMMAND="run envboot; run distro_bootcmd;" +CONFIG_BOOTSTD_FULL=y +CONFIG_BOOTSTD_DEFAULTS=y +CONFIG_BOOTCOMMAND="run envboot; bootflow scan -lb" CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_MAX_SIZE=0x180000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
include/configs/am64x_evm.h +0 -9
@@ -9,15 +9,6 @@#ifndef __CONFIG_AM642_EVM_H#define __CONFIG_AM642_EVM_H -#include <linux/sizes.h> -#include <config_distro_bootcmd.h> -#include <env/ti/mmc.h> -#include <asm/arch/am64_hardware.h> -#include <env/ti/k3_dfu.h> - -/* DDR Configuration */ -#define CFG_SYS_SDRAM_BASE1 0x880000000 -/* Now for the remaining common defines */ #include <configs/ti_armv7_common.h>
Signature · 1 line
2.34.1
Re: [PATCH v2 2/2] board: ti: am64x: Switch to standard boot flow
Quoted 67 lines · Roger Quadros
Switch to using bootstd. Note with this change, we will stop using
distro_bootcmdand instead depend entirely on bootflow method of starting the system up.Drop header files that are no longer needed in
am64x_evm.h.k3_dfu.his available via k3_dfu.env in am64x.env.Drop unused macro
CFG_SYS_SDRAM_BASE1.Signed-off-by Roger Quadros <[email protected]>--- board/ti/am64x/am64x.env | 1 + configs/am64x_evm_a53_defconfig | 5 +++-- include/configs/am64x_evm.h | 9 --------- 3 files changed, 4 insertions(+), 11 deletions(-)board/ti/am64x/am64x.env +1
-0@@ -15,6 +15,7 @@ console=ttyS2,115200n8 args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 ${mtdparts} run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr} +boot_targets=mmc1 mmc0 usb pxe dhcp boot=mmc mmcdev=1 bootpart=1:2configs/am64x_evm_a53_defconfig +3
-2@@ -31,8 +31,9 @@ CONFIG_SPL_SPI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000 -CONFIG_DISTRO_DEFAULTS=y -CONFIG_BOOTCOMMAND="run envboot; run distro_bootcmd;" +CONFIG_BOOTSTD_FULL=y +CONFIG_BOOTSTD_DEFAULTS=y +CONFIG_BOOTCOMMAND="run envboot; bootflow scan -lb" CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_MAX_SIZE=0x180000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=yinclude/configs/am64x_evm.h +0
-9@@ -9,15 +9,6 @@#ifndef __CONFIG_AM642_EVM_H#define __CONFIG_AM642_EVM_H -#include <linux/sizes.h> -#include <config_distro_bootcmd.h> -#include <env/ti/mmc.h> -#include <asm/arch/am64_hardware.h> -#include <env/ti/k3_dfu.h> - -/* DDR Configuration */ -#define CFG_SYS_SDRAM_BASE1 0x880000000 -/* Now for the remaining common defines */ #include <configs/ti_armv7_common.h> Signature · 1 line
2.34.1
Signature · 3 lines
Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
Re: [PATCH v2 2/2] board: ti: am64x: Switch to standard boot flow
In reply to Roger QuadrosHi Roger,
Quoted 54 lines · Roger Quadros
Switch to using bootstd. Note with this change, we will stop using
distro_bootcmdand instead depend entirely on bootflow method of starting the system up.Drop header files that are no longer needed in
am64x_evm.h.k3_dfu.his available via k3_dfu.env in am64x.env.Drop unused macro
CFG_SYS_SDRAM_BASE1.Signed-off-by Roger Quadros <[email protected]>--- board/ti/am64x/am64x.env | 1 + configs/am64x_evm_a53_defconfig | 5 +++-- include/configs/am64x_evm.h | 9 --------- 3 files changed, 4 insertions(+), 11 deletions(-)board/ti/am64x/am64x.env +1
-0@@ -15,6 +15,7 @@ console=ttyS2,115200n8 args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 ${mtdparts} run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr} +boot_targets=mmc1 mmc0 usb pxe dhcp boot=mmc mmcdev=1 bootpart=1:2configs/am64x_evm_a53_defconfig +3
-2@@ -31,8 +31,9 @@ CONFIG_SPL_SPI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000 -CONFIG_DISTRO_DEFAULTS=y -CONFIG_BOOTCOMMAND="run envboot; run distro_bootcmd;" +CONFIG_BOOTSTD_FULL=y +CONFIG_BOOTSTD_DEFAULTS=y +CONFIG_BOOTCOMMAND="run envboot; bootflow scan -lb" CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_MAX_SIZE=0x180000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=yinclude/configs/am64x_evm.h +0
-1@@ -9,15 +9,6 @@#ifndef __CONFIG_AM642_EVM_H#define __CONFIG_AM642_EVM_H -#include <linux/sizes.h>
include/configs/am64x_evm.h line 13
Quoted 10 lines
include/configs/am64x_evm.h +0
-8-#include <config_distro_bootcmd.h> -#include <env/ti/mmc.h> -#include <asm/arch/am64_hardware.h> -#include <env/ti/k3_dfu.h> - -/* DDR Configuration */ -#define CFG_SYS_SDRAM_BASE1 0x880000000 -/* Now for the remaining common defines */ #include <configs/ti_armv7_common.h>
It looks like this file still includes distro_bootcmd and defines all the BOOT_TARGET things. Can they be dropped? Perhaps for now they could be put behind an #ifdef if other boards need them?
I suspect that with your patch as is, the environment is still full of scripts?
Quoted 4 lines
include/configs/am64x_evm.h +0
-1--2.34.1
Regards,
Simon
Re: [PATCH v2 2/2] board: ti: am64x: Switch to standard boot flow
Quoted 72 lines · Simon Glass
Hi Roger,
Quoted 54 lines · Roger Quadros
Switch to using bootstd. Note with this change, we will stop using
distro_bootcmdand instead depend entirely on bootflow method of starting the system up.Drop header files that are no longer needed in
am64x_evm.h.k3_dfu.his available via k3_dfu.env in am64x.env.Drop unused macro
CFG_SYS_SDRAM_BASE1.Signed-off-by Roger Quadros <[email protected]>--- board/ti/am64x/am64x.env | 1 + configs/am64x_evm_a53_defconfig | 5 +++-- include/configs/am64x_evm.h | 9 --------- 3 files changed, 4 insertions(+), 11 deletions(-)board/ti/am64x/am64x.env +1
-0@@ -15,6 +15,7 @@ console=ttyS2,115200n8 args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 ${mtdparts} run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr} +boot_targets=mmc1 mmc0 usb pxe dhcp boot=mmc mmcdev=1 bootpart=1:2configs/am64x_evm_a53_defconfig +3
-2@@ -31,8 +31,9 @@ CONFIG_SPL_SPI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000 -CONFIG_DISTRO_DEFAULTS=y -CONFIG_BOOTCOMMAND="run envboot; run distro_bootcmd;" +CONFIG_BOOTSTD_FULL=y +CONFIG_BOOTSTD_DEFAULTS=y +CONFIG_BOOTCOMMAND="run envboot; bootflow scan -lb" CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_MAX_SIZE=0x180000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=yinclude/configs/am64x_evm.h +0
-1@@ -9,15 +9,6 @@#ifndef __CONFIG_AM642_EVM_H#define __CONFIG_AM642_EVM_H -#include <linux/sizes.h> include/configs/am64x_evm.h line 13
Quoted 10 lines
include/configs/am64x_evm.h +0
-8-#include <config_distro_bootcmd.h> -#include <env/ti/mmc.h> -#include <asm/arch/am64_hardware.h> -#include <env/ti/k3_dfu.h> - -/* DDR Configuration */ -#define CFG_SYS_SDRAM_BASE1 0x880000000 -/* Now for the remaining common defines */ #include <configs/ti_armv7_common.h> It looks like this file still includes
distro_bootcmdand defines all theBOOT_TARGETthings. Can they be dropped? Perhaps for now they could be put behind an #ifdef if other boards need them?
Quoted 1 line
I suspect that with your patch as is, the environment is still full of scripts?
There's a lot of TI platforms, so I'm not sure what "#if" you're thinking of might make it cleaner? We could / should move some of the still relevant content and comments from that file to include/env/ti/ti_armv7_common.env as I do think some of the K3 platforms could just drop <configs/ti_armv7_common.h> at this point.
Signature · 1 line
Tom
Re: [PATCH v2 2/2] board: ti: am64x: Switch to standard boot flow
On 12:31-20231005, Tom Rini wrote:
[...]
Quoted 7 lines
Quoted 7 lines
Quoted 2 lines
/* Now for the remaining common defines */
#include <configs/ti_armv7_common.h>It looks like this file still includes
distro_bootcmdand defines all theBOOT_TARGETthings. Can they be dropped? Perhaps for now they could be put behind an #ifdef if other boards need them?
Quoted 7 lines
Quoted 1 line
I suspect that with your patch as is, the environment is still full of scripts?
There's a lot of TI platforms, so I'm not sure what "#if" you're thinking of might make it cleaner? We could / should move some of the still relevant content and comments from that file to
include/env/ti/ti_armv7_common.envas I do think some of the K3 platforms could just drop <configs/ti_armv7_common.h> at this point.
Is'nt the header distro_bootcmd.h and related stuff under #ifdef CONFIG_DISTRO_DEFAULTS already?
So, all we are picking up in effect is really CFG_SYS_SDRAM_BASE - which is consistent across platforms.
Signature · 3 lines
Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
Re: [PATCH v2 2/2] board: ti: am64x: Switch to standard boot flow
Quoted 12 lines · Nishanth Menon
On 12:31-20231005, Tom Rini wrote:
[...]Quoted 9 lines
Quoted 8 lines
Quoted 2 lines
/* Now for the remaining common defines */
#include <configs/ti_armv7_common.h>It looks like this file still includes
distro_bootcmdand defines all theBOOT_TARGETthings. Can they be dropped? Perhaps for now they could be put behind an #ifdef if other boards need them?I suspect that with your patch as is, the environment is still full of scripts?
Quoted 8 lines
Quoted 5 lines
There's a lot of TI platforms, so I'm not sure what "#if" you're thinking of might make it cleaner? We could / should move some of the still relevant content and comments from that file to
include/env/ti/ti_armv7_common.envas I do think some of the K3 platforms could just drop <configs/ti_armv7_common.h> at this point.Is'nt the header
distro_bootcmd.hand related stuff under #ifdefCONFIG_DISTRO_DEFAULTSalready?
That's true too. The file (and probably all of the other *common.h ones) likely need some cleaning out of dead comments, etc, from the Kconfig migration.
Signature · 1 line
Tom
Re: [PATCH v2 2/2] board: ti: am64x: Switch to standard boot flow
In reply to Tom RiniHi Tom,
Quoted 74 lines · Tom Rini
Quoted 72 lines · Simon Glass
Hi Roger,
Quoted 54 lines · Roger Quadros
Switch to using bootstd. Note with this change, we will stop using
distro_bootcmdand instead depend entirely on bootflow method of starting the system up.Drop header files that are no longer needed in
am64x_evm.h.k3_dfu.his available via k3_dfu.env in am64x.env.Drop unused macro
CFG_SYS_SDRAM_BASE1.Signed-off-by Roger Quadros <[email protected]>--- board/ti/am64x/am64x.env | 1 + configs/am64x_evm_a53_defconfig | 5 +++-- include/configs/am64x_evm.h | 9 --------- 3 files changed, 4 insertions(+), 11 deletions(-)board/ti/am64x/am64x.env +1
-0@@ -15,6 +15,7 @@ console=ttyS2,115200n8 args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 ${mtdparts} run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr} +boot_targets=mmc1 mmc0 usb pxe dhcp boot=mmc mmcdev=1 bootpart=1:2configs/am64x_evm_a53_defconfig +3
-2@@ -31,8 +31,9 @@ CONFIG_SPL_SPI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000 -CONFIG_DISTRO_DEFAULTS=y -CONFIG_BOOTCOMMAND="run envboot; run distro_bootcmd;" +CONFIG_BOOTSTD_FULL=y +CONFIG_BOOTSTD_DEFAULTS=y +CONFIG_BOOTCOMMAND="run envboot; bootflow scan -lb" CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_MAX_SIZE=0x180000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=yinclude/configs/am64x_evm.h +0
-1@@ -9,15 +9,6 @@#ifndef __CONFIG_AM642_EVM_H#define __CONFIG_AM642_EVM_H -#include <linux/sizes.h> include/configs/am64x_evm.h line 13
Quoted 10 lines
include/configs/am64x_evm.h +0
-8-#include <config_distro_bootcmd.h> -#include <env/ti/mmc.h> -#include <asm/arch/am64_hardware.h> -#include <env/ti/k3_dfu.h> - -/* DDR Configuration */ -#define CFG_SYS_SDRAM_BASE1 0x880000000 -/* Now for the remaining common defines */ #include <configs/ti_armv7_common.h> It looks like this file still includes
distro_bootcmdand defines all theBOOT_TARGETthings. Can they be dropped? Perhaps for now they could be put behind an #ifdef if other boards need them?
Quoted 7 lines
Quoted 1 line
I suspect that with your patch as is, the environment is still full of scripts?
There's a lot of TI platforms, so I'm not sure what "#if" you're thinking of might make it cleaner? We could / should move some of the still relevant content and comments from that file to
include/env/ti/ti_armv7_common.envas I do think some of the K3 platforms could just drop <configs/ti_armv7_common.h> at this point.
OK so if they are using text env then the header-file stuff doesn't matter since I believe it is ignored? I was thinking of something like:
#ifdef CONFIG_DISTRO_DEFAULTS
do all the distro #defines
#endif
Regards,
Simon
Re: [PATCH v2 2/2] board: ti: am64x: Switch to standard boot flow
Hi Simon,
Quoted 89 lines · Simon Glass
Hi Tom,
Quoted 74 lines · Tom Rini
Quoted 72 lines · Simon Glass
Hi Roger,
Quoted 54 lines · Roger Quadros
Switch to using bootstd. Note with this change, we will stop using
distro_bootcmdand instead depend entirely on bootflow method of starting the system up.Drop header files that are no longer needed in
am64x_evm.h.k3_dfu.his available via k3_dfu.env in am64x.env.Drop unused macro
CFG_SYS_SDRAM_BASE1.Signed-off-by Roger Quadros <[email protected]>--- board/ti/am64x/am64x.env | 1 + configs/am64x_evm_a53_defconfig | 5 +++-- include/configs/am64x_evm.h | 9 --------- 3 files changed, 4 insertions(+), 11 deletions(-)board/ti/am64x/am64x.env +1
-0@@ -15,6 +15,7 @@ console=ttyS2,115200n8 args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 ${mtdparts} run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr} +boot_targets=mmc1 mmc0 usb pxe dhcp boot=mmc mmcdev=1 bootpart=1:2configs/am64x_evm_a53_defconfig +3
-2@@ -31,8 +31,9 @@ CONFIG_SPL_SPI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000 -CONFIG_DISTRO_DEFAULTS=y -CONFIG_BOOTCOMMAND="run envboot; run distro_bootcmd;" +CONFIG_BOOTSTD_FULL=y +CONFIG_BOOTSTD_DEFAULTS=y +CONFIG_BOOTCOMMAND="run envboot; bootflow scan -lb" CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_MAX_SIZE=0x180000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=yinclude/configs/am64x_evm.h +0
-1@@ -9,15 +9,6 @@#ifndef __CONFIG_AM642_EVM_H#define __CONFIG_AM642_EVM_H -#include <linux/sizes.h> include/configs/am64x_evm.h line 13
Quoted 10 lines
include/configs/am64x_evm.h +0
-8-#include <config_distro_bootcmd.h> -#include <env/ti/mmc.h> -#include <asm/arch/am64_hardware.h> -#include <env/ti/k3_dfu.h> - -/* DDR Configuration */ -#define CFG_SYS_SDRAM_BASE1 0x880000000 -/* Now for the remaining common defines */ #include <configs/ti_armv7_common.h> It looks like this file still includes
distro_bootcmdand defines all theBOOT_TARGETthings. Can they be dropped? Perhaps for now they could be put behind an #ifdef if other boards need them?Quoted 7 lines
Quoted 1 line
I suspect that with your patch as is, the environment is still full of scripts?
There's a lot of TI platforms, so I'm not sure what "#if" you're thinking of might make it cleaner? We could / should move some of the still relevant content and comments from that file to
include/env/ti/ti_armv7_common.envas I do think some of the K3 platforms could just drop <configs/ti_armv7_common.h> at this point.OK so if they are using text env then the header-file stuff doesn't matter since I believe it is ignored? I was thinking of something like:
Quoted 5 lines
#ifdef
CONFIG_DISTRO_DEFAULTSdo all the distro #defines
#endif
This is already done, although within #ifdef CONFIG_ARM64 ...
All we are picking up is really CFG_SYS_SDRAM_BASE.
Cleaning up ti_armv7_common.h should be a separate series and involve testing on all affected platforms (entire TI range) :P.
Signature · 2 lines
cheers, -roger
Re: [PATCH v2 2/2] board: ti: am64x: Switch to standard boot flow
In reply to Roger QuadrosQuoted 11 lines · Roger Quadros
Switch to using bootstd. Note with this change, we will stop using
distro_bootcmdand instead depend entirely on bootflow method of starting the system up.Drop header files that are no longer needed in
am64x_evm.h.k3_dfu.his available via k3_dfu.env in am64x.env.Drop unused macro
CFG_SYS_SDRAM_BASE1.Signed-off-by Roger Quadros <[email protected]>Reviewed-by Nishanth Menon <[email protected]>
Applied to u-boot/master, thanks!
Signature · 1 line
Tom