Skip to contentSkip to conversation

bpf: Fix src IP addr related limitation in bpf_*_fib_lookup()

PATCH Applied Martynas Pumputis 2 participants 4 messages Oct 7, 2023 – Oct 9, 2023

Subsystems (7)
lore
Share & tools
lore
#0 lore raw

v3 cover bpf: Fix src IP addr related limitation in bpf_*_fib_lookup()

The patchset fixes the limitation of bpf_*_fib_lookup() helper, which prevents it from being used in BPF dataplanes with network interfaces which have more than one IP addr. See the first patch for more details. Thanks!

* v2->v3: Address Martin KaFai Lau's feedback
* v1->v2: Use IPv6 stubs to fix compilation when CONFIG_IPV6=m.

Martynas Pumputis (2):
bpf: Derive source IP addr via bpf_*_fib_lookup() selftests/bpf: Add BPF_FIB_LOOKUP_SET_SRC tests

 include/uapi/linux/bpf.h                      |  9 +++
 net/core/filter.c                             | 13 +++-
 tools/include/uapi/linux/bpf.h                | 10 +++
 .../selftests/bpf/prog_tests/fib_lookup.c     | 76 +++++++++++++++++--
 4 files changed, 101 insertions(+), 7 deletions(-)
Signature · 1 line
2.42.0
#1 lore raw

PATCH v3 1/2 bpf: Derive source IP addr via bpf_*_fib_lookup()

Extend the bpf_fib_lookup() helper by making it to return the source IPv4/IPv6 address if the BPF_FIB_LOOKUP_SRC flag is set.

For example, the following snippet can be used to derive the desired source IP address:

    struct bpf_fib_lookup p = { .ipv4_dst = ip4->daddr };

    ret = bpf_skb_fib_lookup(skb, p, sizeof(p),
            BPF_FIB_LOOKUP_SRC | BPF_FIB_LOOKUP_SKIP_NEIGH);
    if (ret != BPF_FIB_LKUP_RET_SUCCESS)
        return TC_ACT_SHOT;

    /* the p.ipv4_src now contains the source address */

The inability to derive the proper source address may cause malfunctions in BPF-based dataplanes for hosts containing netdevs with more than one routable IP address or for multi-homed hosts.

For example, Cilium implements packet masquerading in BPF. If an egressing netdev to which the Cilium's BPF prog is attached has multiple IP addresses, then only one [hardcoded] IP address can be used for masquerading. This breaks connectivity if any other IP address should have been selected instead, for example, when a public and private addresses are attached to the same egress interface.

The change was tested with Cilium [1].

Nikolay Aleksandrov helped to figure out the IPv6 addr selection.

[1]: https://github.com/cilium/cilium/pull/28283

---
 include/net/ipv6_stubs.h       |  5 +++++
 include/uapi/linux/bpf.h       | 10 ++++++++++
 net/core/filter.c              | 18 +++++++++++++++++-
 net/ipv6/af_inet6.c            |  1 +
 tools/include/uapi/linux/bpf.h | 11 +++++++++++
 5 files changed, 44 insertions(+), 1 deletion(-)
include/net/ipv6_stubs.h +5 -0
index c48186bf4737..21da31e1dff5 100644
@@ -85,6 +85,11 @@ struct ipv6_bpf_stub {
 			       sockptr_t optval, unsigned int optlen);
 	int (*ipv6_getsockopt)(struct sock *sk, int level, int optname,
 			       sockptr_t optval, sockptr_t optlen);
+	int (*ipv6_dev_get_saddr)(struct net *net,
+				  const struct net_device *dst_dev,
+				  const struct in6_addr *daddr,
+				  unsigned int prefs,
+				  struct in6_addr *saddr);
 };
 extern const struct ipv6_bpf_stub *ipv6_bpf_stub __read_mostly;
 
include/uapi/linux/bpf.h +10 -0
index 0448700890f7..0f5135eeee84 100644
@@ -3257,6 +3257,11 @@ union bpf_attr {
  *			and *params*->smac will not be set as output. A common
  *			use case is to call **bpf_redirect_neigh**\ () after
  *			doing **bpf_fib_lookup**\ ().
+ *		**BPF_FIB_LOOKUP_SRC**
+ *			Derive and set source IP addr in *params*->ipv{4,6}_src
+ *			for the nexthop. If the src addr cannot be derived,
+ *			**BPF_FIB_LKUP_RET_NO_SRC_ADDR** is returned. In this
+ *			case *params*->dmac and *params*->smac are not set.
  *
  *		*ctx* is either **struct xdp_md** for XDP programs or
  *		**struct sk_buff** tc cls_act programs.
@@ -6953,6 +6958,7 @@ enum {
 	BPF_FIB_LOOKUP_OUTPUT  = (1U << 1),
 	BPF_FIB_LOOKUP_SKIP_NEIGH = (1U << 2),
 	BPF_FIB_LOOKUP_TBID    = (1U << 3),
+	BPF_FIB_LOOKUP_SRC     = (1U << 4),
 };
 
 enum {
@@ -6965,6 +6971,7 @@ enum {
 	BPF_FIB_LKUP_RET_UNSUPP_LWT,   /* fwd requires encapsulation */
 	BPF_FIB_LKUP_RET_NO_NEIGH,     /* no neighbor entry for nh */
 	BPF_FIB_LKUP_RET_FRAG_NEEDED,  /* fragmentation required to fwd */
+	BPF_FIB_LKUP_RET_NO_SRC_ADDR,  /* failed to derive IP src addr */
 };
 
 struct bpf_fib_lookup {
@@ -6999,6 +7006,9 @@ struct bpf_fib_lookup {
 		__u32	rt_metric;
 	};
 
+	/* input: source address to consider for lookup
+	 * output: source address result from lookup
+	 */
 	union {
 		__be32		ipv4_src;
 		__u32		ipv6_src[4];  /* in6_addr; network order */
net/core/filter.c +17 -1
index a094694899c9..3880bf0b740d 100644
@@ -5850,6 +5850,9 @@ static int bpf_ipv4_fib_lookup(struct net *net, struct bpf_fib_lookup *params,
 	params->rt_metric = res.fi->fib_priority;
 	params->ifindex = dev->ifindex;
 
+	if (flags & BPF_FIB_LOOKUP_SRC)
+		params->ipv4_src = fib_result_prefsrc(net, &res);
+
 	/* xdp and cls_bpf programs are run in RCU-bh so
 	 * rcu_read_lock_bh is not needed here
 	 */
@@ -5992,6 +5995,18 @@ static int bpf_ipv6_fib_lookup(struct net *net, struct bpf_fib_lookup *params,
 	params->rt_metric = res.f6i->fib6_metric;
 	params->ifindex = dev->ifindex;
 
+	if (flags & BPF_FIB_LOOKUP_SRC) {
+		if (res.f6i->fib6_prefsrc.plen) {
+			*src = res.f6i->fib6_prefsrc.addr;
+		} else {
+			err = ipv6_bpf_stub->ipv6_dev_get_saddr(net, dev,
+								&fl6.daddr, 0,
+								src);
+			if (err)
+				return BPF_FIB_LKUP_RET_NO_SRC_ADDR;
+		}
+	}
+
 	if (flags & BPF_FIB_LOOKUP_SKIP_NEIGH)
 		goto set_fwd_params;
 
@@ -6010,7 +6025,8 @@ static int bpf_ipv6_fib_lookup(struct net *net, struct bpf_fib_lookup *params,
 #endif
 
 #define BPF_FIB_LOOKUP_MASK (BPF_FIB_LOOKUP_DIRECT | BPF_FIB_LOOKUP_OUTPUT | \
-			     BPF_FIB_LOOKUP_SKIP_NEIGH | BPF_FIB_LOOKUP_TBID)
+			     BPF_FIB_LOOKUP_SKIP_NEIGH | BPF_FIB_LOOKUP_TBID | \
+			     BPF_FIB_LOOKUP_SRC)
 
 BPF_CALL_4(bpf_xdp_fib_lookup, struct xdp_buff *, ctx,
 	   struct bpf_fib_lookup *, params, int, plen, u32, flags)
net/ipv6/af_inet6.c +1 -0
index 368824fe9719..5382c6543d46 100644
@@ -1060,6 +1060,7 @@ static const struct ipv6_bpf_stub ipv6_bpf_stub_impl = {
 	.udp6_lib_lookup = __udp6_lib_lookup,
 	.ipv6_setsockopt = do_ipv6_setsockopt,
 	.ipv6_getsockopt = do_ipv6_getsockopt,
+	.ipv6_dev_get_saddr = ipv6_dev_get_saddr,
 };
 
 static int __init inet6_init(void)
tools/include/uapi/linux/bpf.h +11 -0
index 0448700890f7..3392dd80474f 100644
@@ -3257,6 +3257,11 @@ union bpf_attr {
  *			and *params*->smac will not be set as output. A common
  *			use case is to call **bpf_redirect_neigh**\ () after
  *			doing **bpf_fib_lookup**\ ().
+ *		**BPF_FIB_LOOKUP_SRC**
+ *			Derive and set source IP addr in *params*->ipv{4,6}_src
+ *			for the nexthop. If the src addr cannot be derived,
+ *			**BPF_FIB_LKUP_RET_NO_SRC_ADDR** is returned. In this
+ *			case *params*->dmac and *params*->smac are not set.
  *
  *		*ctx* is either **struct xdp_md** for XDP programs or
  *		**struct sk_buff** tc cls_act programs.
@@ -6953,6 +6958,7 @@ enum {
 	BPF_FIB_LOOKUP_OUTPUT  = (1U << 1),
 	BPF_FIB_LOOKUP_SKIP_NEIGH = (1U << 2),
 	BPF_FIB_LOOKUP_TBID    = (1U << 3),
+	BPF_FIB_LOOKUP_SRC     = (1U << 4),
 };
 
 enum {
@@ -6965,6 +6971,7 @@ enum {
 	BPF_FIB_LKUP_RET_UNSUPP_LWT,   /* fwd requires encapsulation */
 	BPF_FIB_LKUP_RET_NO_NEIGH,     /* no neighbor entry for nh */
 	BPF_FIB_LKUP_RET_FRAG_NEEDED,  /* fragmentation required to fwd */
+	BPF_FIB_LKUP_RET_NO_SRC_ADDR,  /* failed to derive IP src addr */
 };
 
 struct bpf_fib_lookup {
@@ -6999,6 +7006,10 @@ struct bpf_fib_lookup {
 		__u32	rt_metric;
 	};
 
+
+	/* input: source address to consider for lookup
+	 * output: source address result from lookup
+	 */
 	union {
 		__be32		ipv4_src;
 		__u32		ipv6_src[4];  /* in6_addr; network order */
Signature · 1 line
2.42.0
#2 lore raw

PATCH v3 2/2 selftests/bpf: Add BPF_FIB_LOOKUP_SRC tests

In reply to Martynas Pumputis

This patch extends the existing fib_lookup test suite by adding two test cases (for each IP family):

* Test source IP selection from the egressing netdev.
* Test source IP selection when an IP route has a preferred src IP addr.

---
 .../selftests/bpf/prog_tests/fib_lookup.c     | 83 +++++++++++++++++--
 1 file changed, 77 insertions(+), 6 deletions(-)
tools/testing/selftests/bpf/prog_tests/fib_lookup.c +77 -6
index 2fd05649bad1..4ad4cd69152e 100644
@@ -11,9 +11,13 @@
 
 #define NS_TEST			"fib_lookup_ns"
 #define IPV6_IFACE_ADDR		"face::face"
+#define IPV6_IFACE_ADDR_SEC	"cafe::cafe"
+#define IPV6_ADDR_DST		"face::3"
 #define IPV6_NUD_FAILED_ADDR	"face::1"
 #define IPV6_NUD_STALE_ADDR	"face::2"
 #define IPV4_IFACE_ADDR		"10.0.0.254"
+#define IPV4_IFACE_ADDR_SEC	"10.1.0.254"
+#define IPV4_ADDR_DST		"10.2.0.254"
 #define IPV4_NUD_FAILED_ADDR	"10.0.0.1"
 #define IPV4_NUD_STALE_ADDR	"10.0.0.2"
 #define IPV4_TBID_ADDR		"172.0.0.254"
@@ -31,6 +35,7 @@ struct fib_lookup_test {
 	const char *desc;
 	const char *daddr;
 	int expected_ret;
+	const char *expected_src;
 	int lookup_flags;
 	__u32 tbid;
 	__u8 dmac[6];
@@ -69,6 +74,22 @@ static const struct fib_lookup_test tests[] = {
 	  .daddr = IPV6_TBID_DST, .expected_ret = BPF_FIB_LKUP_RET_SUCCESS,
 	  .lookup_flags = BPF_FIB_LOOKUP_DIRECT | BPF_FIB_LOOKUP_TBID, .tbid = 100,
 	  .dmac = DMAC_INIT2, },
+	{ .desc = "IPv4 set src addr from netdev",
+	  .daddr = IPV4_NUD_FAILED_ADDR, .expected_ret = BPF_FIB_LKUP_RET_SUCCESS,
+	  .expected_src = IPV4_IFACE_ADDR,
+	  .lookup_flags = BPF_FIB_LOOKUP_SRC | BPF_FIB_LOOKUP_SKIP_NEIGH, },
+	{ .desc = "IPv6 set src addr from netdev",
+	  .daddr = IPV6_NUD_FAILED_ADDR, .expected_ret = BPF_FIB_LKUP_RET_SUCCESS,
+	  .expected_src = IPV6_IFACE_ADDR,
+	  .lookup_flags = BPF_FIB_LOOKUP_SRC | BPF_FIB_LOOKUP_SKIP_NEIGH, },
+	{ .desc = "IPv4 set prefsrc addr from route",
+	  .daddr = IPV4_ADDR_DST, .expected_ret = BPF_FIB_LKUP_RET_SUCCESS,
+	  .expected_src = IPV4_IFACE_ADDR_SEC,
+	  .lookup_flags = BPF_FIB_LOOKUP_SRC | BPF_FIB_LOOKUP_SKIP_NEIGH, },
+	{ .desc = "IPv6 set prefsrc addr route",
+	  .daddr = IPV6_ADDR_DST, .expected_ret = BPF_FIB_LKUP_RET_SUCCESS,
+	  .expected_src = IPV6_IFACE_ADDR_SEC,
+	  .lookup_flags = BPF_FIB_LOOKUP_SRC | BPF_FIB_LOOKUP_SKIP_NEIGH, },
 };
 
 static int ifindex;
@@ -97,6 +118,13 @@ static int setup_netns(void)
 	SYS(fail, "ip neigh add %s dev veth1 nud failed", IPV4_NUD_FAILED_ADDR);
 	SYS(fail, "ip neigh add %s dev veth1 lladdr %s nud stale", IPV4_NUD_STALE_ADDR, DMAC);
 
+	/* Setup for prefsrc IP addr selection */
+	SYS(fail, "ip addr add %s/24 dev veth1", IPV4_IFACE_ADDR_SEC);
+	SYS(fail, "ip route add %s/32 dev veth1 src %s", IPV4_ADDR_DST, IPV4_IFACE_ADDR_SEC);
+
+	SYS(fail, "ip addr add %s/64 dev veth1 nodad", IPV6_IFACE_ADDR_SEC);
+	SYS(fail, "ip route add %s/128 dev veth1 src %s", IPV6_ADDR_DST, IPV6_IFACE_ADDR_SEC);
+
 	/* Setup for tbid lookup tests */
 	SYS(fail, "ip addr add %s/24 dev veth2", IPV4_TBID_ADDR);
 	SYS(fail, "ip route del %s/24 dev veth2", IPV4_TBID_NET);
@@ -133,9 +161,12 @@ static int set_lookup_params(struct bpf_fib_lookup *params, const struct fib_loo
 
 	if (inet_pton(AF_INET6, test->daddr, params->ipv6_dst) == 1) {
 		params->family = AF_INET6;
-		ret = inet_pton(AF_INET6, IPV6_IFACE_ADDR, params->ipv6_src);
-		if (!ASSERT_EQ(ret, 1, "inet_pton(IPV6_IFACE_ADDR)"))
-			return -1;
+		if (!(test->lookup_flags & BPF_FIB_LOOKUP_SRC)) {
+			ret = inet_pton(AF_INET6, IPV6_IFACE_ADDR, params->ipv6_src);
+			if (!ASSERT_EQ(ret, 1, "inet_pton(IPV6_IFACE_ADDR)"))
+				return -1;
+		}
+
 		return 0;
 	}
 
@@ -143,9 +174,12 @@ static int set_lookup_params(struct bpf_fib_lookup *params, const struct fib_loo
 	if (!ASSERT_EQ(ret, 1, "convert IP[46] address"))
 		return -1;
 	params->family = AF_INET;
-	ret = inet_pton(AF_INET, IPV4_IFACE_ADDR, &params->ipv4_src);
-	if (!ASSERT_EQ(ret, 1, "inet_pton(IPV4_IFACE_ADDR)"))
-		return -1;
+
+	if (!(test->lookup_flags & BPF_FIB_LOOKUP_SRC)) {
+		ret = inet_pton(AF_INET, IPV4_IFACE_ADDR, &params->ipv4_src);
+		if (!ASSERT_EQ(ret, 1, "inet_pton(IPV4_IFACE_ADDR)"))
+			return -1;
+	}
 
 	return 0;
 }
@@ -156,6 +190,40 @@ static void mac_str(char *b, const __u8 *mac)
 		mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
 }
 
+static void assert_src_ip(struct bpf_fib_lookup *fib_params, const char *expected_src)
+{
+	int ret;
+	__u32 src6[4];
+	__be32 src4;
+
+	switch (fib_params->family) {
+	case AF_INET6:
+		ret = inet_pton(AF_INET6, expected_src, src6);
+		ASSERT_EQ(ret, 1, "inet_pton(expected_src)");
+
+		ret = memcmp(src6, fib_params->ipv6_src, sizeof(fib_params->ipv6_src));
+		if (!ASSERT_EQ(ret, 0, "fib_lookup ipv6 src")) {
+			char str_src6[64];
+
+			inet_ntop(AF_INET6, fib_params->ipv6_src, str_src6,
+				  sizeof(str_src6));
+			printf("ipv6 expected %s actual %s ", expected_src,
+			       str_src6);
+		}
+
+		break;
+	case AF_INET:
+		ret = inet_pton(AF_INET, expected_src, &src4);
+		ASSERT_EQ(ret, 1, "inet_pton(expected_src)");
+
+		ASSERT_EQ(fib_params->ipv4_src, src4, "fib_lookup ipv4 src");
+
+		break;
+	default:
+		PRINT_FAIL("invalid addr family: %d", fib_params->family);
+	}
+}
+
 void test_fib_lookup(void)
 {
 	struct bpf_fib_lookup *fib_params;
@@ -207,6 +275,9 @@ void test_fib_lookup(void)
 		ASSERT_EQ(skel->bss->fib_lookup_ret, tests[i].expected_ret,
 			  "fib_lookup_ret");
 
+		if (tests[i].expected_src)
+			assert_src_ip(fib_params, tests[i].expected_src);
+
 		ret = memcmp(tests[i].dmac, fib_params->dmac, sizeof(tests[i].dmac));
 		if (!ASSERT_EQ(ret, 0, "dmac not match")) {
 			char expected[18], actual[18];
Signature · 1 line
2.42.0
#3 lore raw
In reply to Martynas Pumputis
This series was applied to bpf/bpf-next.git (master) by Martin KaFai Lau <[email protected]>:

Hello:

This series was applied to bpf/bpf-next.git (master) by Martin KaFai Lau <[email protected]>:

Quoted 9 lines · On Sat, 7 Oct 2023 10:14:13 +0200 you wrote:

The patchset fixes the limitation of bpf_*_fib_lookup() helper, which prevents it from being used in BPF dataplanes with network interfaces which have more than one IP addr. See the first patch for more details. Thanks!

* v2->v3: Address Martin KaFai Lau's feedback
* v1->v2: Use IPv6 stubs to fix compilation when CONFIG_IPV6=m.

[...]

Here is the summary with links:
- [bpf,v3,1/2] bpf: Derive source IP addr via bpf_*_fib_lookup()

    https://git.kernel.org/bpf/bpf-next/c/dab4e1f06cab
  - [bpf,v3,2/2] selftests/bpf: Add BPF_FIB_LOOKUP_SRC tests
    https://git.kernel.org/bpf/bpf-next/c/b0f7a8ca1179

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html