Skip to contentSkip to conversation

xfs: handle nimaps=0 from xfs_bmapi_write in xfs_alloc_file_space

PATCH In review Christoph Hellwig 2 participants 2 messages Oct 11, 2023 XFS filesystem

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 xfs: handle nimaps=0 from xfs_bmapi_write in xfs_alloc_file_space

If xfs_bmapi_write finds a delalloc extent at the requested range, it tries to convert the entire delalloc extent to a real allocation.

But if the allocator cannot find a single free extent large enough to cover the start block of the requested range, xfs_bmapi_write will return 0 but leave *nimaps set to 0.

In that case we simply need to keep looping with the same startoffset_fsb so that one of the following allocations will eventually reach the requested range.

Note that this could affect any caller of xfs_bmapi_write that covers an existing delayed allocation. As far as I can tell we do not have any other such caller, though - the regular writeback path uses xfs_bmapi_convert_delalloc to convert delayed allocations to real ones, and direct I/O invalidates the page cache first.

---

Changes since v1:
- update comments and the commit log

 fs/xfs/xfs_bmap_util.c | 24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)
fs/xfs/xfs_bmap_util.c +13 -11
index d85580b101ad8a..2458be8532c7aa 100644
@@ -814,12 +814,10 @@ xfs_alloc_file_space(
 {
 	xfs_mount_t		*mp = ip->i_mount;
 	xfs_off_t		count;
-	xfs_filblks_t		allocated_fsb;
 	xfs_filblks_t		allocatesize_fsb;
 	xfs_extlen_t		extsz, temp;
 	xfs_fileoff_t		startoffset_fsb;
 	xfs_fileoff_t		endoffset_fsb;
-	int			nimaps;
 	int			rt;
 	xfs_trans_t		*tp;
 	xfs_bmbt_irec_t		imaps[1], *imapp;
@@ -842,7 +840,6 @@ xfs_alloc_file_space(
 
 	count = len;
 	imapp = &imaps[0];
-	nimaps = 1;
 	startoffset_fsb	= XFS_B_TO_FSBT(mp, offset);
 	endoffset_fsb = XFS_B_TO_FSB(mp, offset + count);
 	allocatesize_fsb = endoffset_fsb - startoffset_fsb;
@@ -853,6 +850,7 @@ xfs_alloc_file_space(
 	while (allocatesize_fsb && !error) {
 		xfs_fileoff_t	s, e;
 		unsigned int	dblocks, rblocks, resblks;
+		int		nimaps = 1;
 
 		/*
 		 * Determine space reservations for data/realtime.
@@ -918,15 +916,19 @@ xfs_alloc_file_space(
 		if (error)
 			break;
 
-		allocated_fsb = imapp->br_blockcount;
-
-		if (nimaps == 0) {
-			error = -ENOSPC;
-			break;
+		/*
+		 * If the allocator cannot find a single free extent large
+		 * enough to cover the start block of the requested range,
+		 * xfs_bmapi_write will return 0 but leave *nimaps set to 0.
+		 *
+		 * In that case we simply need to keep looping with the same
+		 * startoffset_fsb so that one of the following allocations
+		 * will eventually reach the requested range.
+		 */
+		if (nimaps) {
+			startoffset_fsb += imapp->br_blockcount;
+			allocatesize_fsb -= imapp->br_blockcount;
 		}
-
-		startoffset_fsb += allocated_fsb;
-		allocatesize_fsb -= allocated_fsb;
 	}
 
 	return error;
Signature · 1 line
2.39.2
Reviewed-by on v2 1/1
#1 lore raw
Quoted 11 lines · Christoph Hellwig

If xfs_bmapi_write finds a delalloc extent at the requested range, it tries to convert the entire delalloc extent to a real allocation.

But if the allocator cannot find a single free extent large enough to cover the start block of the requested range, xfs_bmapi_write will return 0 but leave *nimaps set to 0.

In that case we simply need to keep looping with the same startoffset_fsb so that one of the following allocations will eventually reach the requested range.

Quoted 7 lines

Note that this could affect any caller of xfs_bmapi_write that covers an existing delayed allocation. As far as I can tell we do not have any other such caller, though - the regular writeback path uses xfs_bmapi_convert_delalloc to convert delayed allocations to real ones, and direct I/O invalidates the page cache first.

Looks good,

--D

Quoted 72 lines

---

Changes since v1:
- update comments and the commit log

 fs/xfs/xfs_bmap_util.c | 24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)
fs/xfs/xfs_bmap_util.c +13 -11
index d85580b101ad8a..2458be8532c7aa 100644
@@ -814,12 +814,10 @@ xfs_alloc_file_space(
 {
 	xfs_mount_t		*mp = ip->i_mount;
 	xfs_off_t		count;
-	xfs_filblks_t		allocated_fsb;
 	xfs_filblks_t		allocatesize_fsb;
 	xfs_extlen_t		extsz, temp;
 	xfs_fileoff_t		startoffset_fsb;
 	xfs_fileoff_t		endoffset_fsb;
-	int			nimaps;
 	int			rt;
 	xfs_trans_t		*tp;
 	xfs_bmbt_irec_t		imaps[1], *imapp;
@@ -842,7 +840,6 @@ xfs_alloc_file_space(
 
 	count = len;
 	imapp = &imaps[0];
-	nimaps = 1;
 	startoffset_fsb	= XFS_B_TO_FSBT(mp, offset);
 	endoffset_fsb = XFS_B_TO_FSB(mp, offset + count);
 	allocatesize_fsb = endoffset_fsb - startoffset_fsb;
@@ -853,6 +850,7 @@ xfs_alloc_file_space(
 	while (allocatesize_fsb && !error) {
 		xfs_fileoff_t	s, e;
 		unsigned int	dblocks, rblocks, resblks;
+		int		nimaps = 1;
 
 		/*
 		 * Determine space reservations for data/realtime.
@@ -918,15 +916,19 @@ xfs_alloc_file_space(
 		if (error)
 			break;
 
-		allocated_fsb = imapp->br_blockcount;
-
-		if (nimaps == 0) {
-			error = -ENOSPC;
-			break;
+		/*
+		 * If the allocator cannot find a single free extent large
+		 * enough to cover the start block of the requested range,
+		 * xfs_bmapi_write will return 0 but leave *nimaps set to 0.
+		 *
+		 * In that case we simply need to keep looping with the same
+		 * startoffset_fsb so that one of the following allocations
+		 * will eventually reach the requested range.
+		 */
+		if (nimaps) {
+			startoffset_fsb += imapp->br_blockcount;
+			allocatesize_fsb -= imapp->br_blockcount;
 		}
-
-		startoffset_fsb += allocated_fsb;
-		allocatesize_fsb -= allocated_fsb;
 	}
 
 	return error;
Signature · 1 line
2.39.2