mfd: Use device_get_match_data()
Subsystems (5)
PATCH 1/1 mfd: Use device_get_match_data()
Use preferred device_get_match_data() instead of of_match_device() to get the driver match data. With this, adjust the includes to explicitly include the correct headers.
--- drivers/mfd/axp20x.c | 22 +++------------------- drivers/mfd/hi6421-pmic-core.c | 9 +++------ drivers/mfd/mxs-lradc.c | 9 ++------- drivers/mfd/qcom-spmi-pmic.c | 6 ++++-- drivers/mfd/qcom_rpm.c | 8 ++++---- drivers/mfd/tps65910.c | 11 ++--------- drivers/mfd/twl4030-power.c | 9 +++------ drivers/mfd/twl6030-irq.c | 10 +++++----- 8 files changed, 26 insertions(+), 58 deletions(-)
drivers/mfd/axp20x.c +3 -19
@@ -22,7 +22,8 @@#include <linux/mfd/axp20x.h> #include <linux/mfd/core.h> #include <linux/module.h> -#include <linux/of_device.h> +#include <linux/of.h> +#include <linux/property.h> #include <linux/reboot.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h>
@@ -1131,27 +1132,10 @@ static int axp20x_power_off(struct sys_off_data *data)int axp20x_match_device (struct axp20x_dev *axp20x) {struct device *dev = axp20x->dev; -const struct acpi_device_id *acpi_id; -const struct of_device_id *of_id;const struct mfd_cell *cells_no_irq =NULL ;int nr_cells_no_irq =0 ; -if (dev->of_node) { - of_id =of_match_device (dev->driver->of_match_table, dev); -if (!of_id) { -dev_err (dev,"Unable to match OF ID\n" ); -return -ENODEV ; - } - axp20x->variant = (long )of_id->data; - }else { - acpi_id =acpi_match_device (dev->driver->acpi_match_table, dev); -if (!acpi_id || !acpi_id->driver_data) { -dev_err (dev,"Unable to match ACPI ID and data\n" ); -return -ENODEV ; - } - axp20x->variant = (long )acpi_id->driver_data; - } - + axp20x->variant = (long )device_get_match_data (dev);switch (axp20x->variant) {case AXP152_ID : axp20x->nr_cells =ARRAY_SIZE (axp152_cells);
drivers/mfd/hi6421-pmic-core.c +3 -6
@@ -15,8 +15,9 @@#include <linux/mfd/core.h> #include <linux/mfd/hi6421-pmic.h> #include <linux/module.h> -#include <linux/of_device.h> +#include <linux/of.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/regmap.h> static const struct mfd_cell hi6421_devs[] = {
@@ -50,16 +51,12 @@ MODULE_DEVICE_TABLE(of, of_hi6421_pmic_match);static int hi6421_pmic_probe (struct platform_device *pdev) {struct hi6421_pmic *pmic; -const struct of_device_id *id;const struct mfd_cell *subdevs;enum hi6421_type type;void __iomem *base;int n_subdevs, ret; - id =of_match_device (of_hi6421_pmic_match, &pdev->dev); -if (!id) -return -EINVAL ; - type = (uintptr_t )id->data; + type = (uintptr_t )device_get_match_data (&pdev->dev); pmic =devm_kzalloc (&pdev->dev,sizeof (*pmic),GFP_KERNEL );if (!pmic)
drivers/mfd/mxs-lradc.c +2 -7
@@ -16,8 +16,8 @@#include <linux/mfd/mxs-lradc.h> #include <linux/module.h> #include <linux/of.h> -#include <linux/of_device.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/slab.h> #define ADC_CELL 0
@@ -125,7 +125,6 @@ MODULE_DEVICE_TABLE(of, mxs_lradc_dt_ids);static int mxs_lradc_probe (struct platform_device *pdev) { -const struct of_device_id *of_id;struct device *dev = &pdev->dev;struct device_node *node = dev->of_node;struct mxs_lradc *lradc;
@@ -138,11 +137,7 @@ static int mxs_lradc_probe(struct platform_device *pdev)if (!lradc)return -ENOMEM ; - of_id =of_match_device (mxs_lradc_dt_ids, &pdev->dev); -if (!of_id) -return -EINVAL ; - - lradc->soc = (uintptr_t )of_id->data; + lradc->soc = (enum mxs_lradc_id )device_get_match_data (&pdev->dev); lradc->clk =devm_clk_get (&pdev->dev,NULL );if (IS_ERR (lradc->clk)) {
drivers/mfd/qcom-spmi-pmic.c +4 -2
@@ -8,10 +8,12 @@#include <linux/gfp.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_platform.h> #include <linux/spmi.h> #include <linux/types.h> #include <linux/regmap.h> -#include <linux/of_platform.h> #include <soc/qcom/qcom-spmi-pmic.h> #define PMIC_REV2 0x101
@@ -236,7 +238,7 @@ static int pmic_spmi_probe(struct spmi_device *sdev)if (!ctx)return -ENOMEM ; - ctx->num_usids = (uintptr_t )of_device_get_match_data (&sdev->dev); + ctx->num_usids = (uintptr_t )device_get_match_data (&sdev->dev);/* Only the first slave id for a PMIC contains this information */ if (sdev->usid % ctx->num_usids ==0 ) {
drivers/mfd/qcom_rpm.c +4 -4
@@ -7,6 +7,8 @@#include <linux/module.h> #include <linux/platform_device.h> +#include <linux/property.h> +#include <linux/of.h> #include <linux/of_platform.h> #include <linux/io.h> #include <linux/interrupt.h>
@@ -528,7 +530,6 @@ static irqreturn_t qcom_rpm_wakeup_interrupt(int irq, void *dev)static int qcom_rpm_probe (struct platform_device *pdev) { -const struct of_device_id *match;struct device_node *syscon_np;struct qcom_rpm *rpm;u32 fw_version[3 ];
@@ -570,10 +571,9 @@ static int qcom_rpm_probe(struct platform_device *pdev)if (irq_wakeup <0 )return irq_wakeup; - match =of_match_device (qcom_rpm_of_match, &pdev->dev); -if (!match) + rpm->data =device_get_match_data (&pdev->dev); +if (!rpm->data)return -ENODEV ; - rpm->data = match->data; rpm->status_regs =devm_platform_get_and_ioremap_resource (pdev,0 ,NULL );if (IS_ERR (rpm->status_regs))
drivers/mfd/tps65910.c +2 -9
@@ -19,7 +19,7 @@#include <linux/regmap.h> #include <linux/mfd/tps65910.h> #include <linux/of.h> -#include <linux/of_device.h> +#include <linux/property.h> static const struct resource rtc_resources[] = { {
@@ -374,16 +374,9 @@ static struct tps65910_board *tps65910_parse_dt(struct i2c_client *client,struct device_node *np = client->dev.of_node;struct tps65910_board *board_info;unsigned int prop; -const struct of_device_id *match;int ret; - match =of_match_device (tps65910_of_match, &client->dev); -if (!match) { -dev_err (&client->dev,"Failed to find matching dt id\n" ); -return NULL ; - } - - *chip_id = (unsigned long )match->data; + *chip_id = (unsigned long )device_get_match_data (&client->dev); board_info =devm_kzalloc (&client->dev,sizeof (*board_info),GFP_KERNEL );
drivers/mfd/twl4030-power.c +3 -6
@@ -27,8 +27,8 @@#include <linux/pm.h> #include <linux/mfd/twl.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/of.h> -#include <linux/of_device.h> #include <asm/mach-types.h>
@@ -883,7 +883,6 @@ static int twl4030_power_probe(struct platform_device *pdev) {const struct twl4030_power_data *pdata =dev_get_platdata (&pdev->dev);struct device_node *node = pdev->dev.of_node; -const struct of_device_id *match;int err =0 ;int err2 =0 ;u8 val;
@@ -904,10 +903,8 @@ static int twl4030_power_probe(struct platform_device *pdev)return err; } - match =of_match_device (of_match_ptr (twl4030_power_of_match), - &pdev->dev); -if (match && match->data) - pdata = match->data; +if (node) + pdata =device_get_match_data (&pdev->dev);if (pdata) { err =twl4030_power_configure_scripts (pdata);
drivers/mfd/twl6030-irq.c +5 -5
@@ -24,10 +24,10 @@#include <linux/kthread.h> #include <linux/mfd/twl.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/suspend.h> #include <linux/of.h> #include <linux/irqdomain.h> -#include <linux/of_device.h> #include "twl-core.h"
@@ -368,10 +368,10 @@ int twl6030_init_irq(struct device *dev, int irq_num)int nr_irqs;int status;u8 mask[3 ]; -const struct of_device_id *of_id; +const int *irq_tbl; - of_id =of_match_device (twl6030_of_match, dev); -if (!of_id || !of_id->data) { + irq_tbl =device_get_match_data (dev); +if (!irq_tbl) {dev_err (dev,"Unknown TWL device model\n" );return -EINVAL ; }
@@ -409,7 +409,7 @@ int twl6030_init_irq(struct device *dev, int irq_num) twl6030_irq->pm_nb.notifier_call = twl6030_irq_pm_notifier;atomic_set (&twl6030_irq->wakeirqs,0 ); - twl6030_irq->irq_mapping_tbl = of_id->data; + twl6030_irq->irq_mapping_tbl = irq_tbl; twl6030_irq->irq_domain = irq_domain_add_linear(node, nr_irqs,
Signature · 1 line
2.42.0
Quoted 8 lines · Rob Herring
Use preferred
device_get_match_data()instead ofof_match_device()to get the driver match data. With this, adjust the includes to explicitly include the correct headers.Signed-off-by Rob Herring <[email protected]>--- drivers/mfd/axp20x.c | 22 +++-------------------
I'd keep the error message, but otherwise for axp20x,
Quoted 289 lines
drivers/mfd/hi6421-pmic-core.c | 9 +++------ drivers/mfd/mxs-lradc.c | 9 ++------- drivers/mfd/qcom-spmi-pmic.c | 6 ++++-- drivers/mfd/qcom_rpm.c | 8 ++++---- drivers/mfd/tps65910.c | 11 ++--------- drivers/mfd/twl4030-power.c | 9 +++------ drivers/mfd/twl6030-irq.c | 10 +++++----- 8 files changed, 26 insertions(+), 58 deletions(-)drivers/mfd/axp20x.c +3
-19@@ -22,7 +22,8 @@#include <linux/mfd/axp20x.h> #include <linux/mfd/core.h> #include <linux/module.h> -#include <linux/of_device.h> +#include <linux/of.h> +#include <linux/property.h> #include <linux/reboot.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> @@ -1131,27 +1132,10 @@ static int axp20x_power_off(struct sys_off_data *data)int axp20x_match_device (struct axp20x_dev *axp20x) {struct device *dev = axp20x->dev; -const struct acpi_device_id *acpi_id; -const struct of_device_id *of_id;const struct mfd_cell *cells_no_irq =NULL ;int nr_cells_no_irq =0 ; -if (dev->of_node) { - of_id =of_match_device (dev->driver->of_match_table, dev); -if (!of_id) { -dev_err (dev,"Unable to match OF ID\n" ); -return -ENODEV ; - } - axp20x->variant = (long )of_id->data; - }else { - acpi_id =acpi_match_device (dev->driver->acpi_match_table, dev); -if (!acpi_id || !acpi_id->driver_data) { -dev_err (dev,"Unable to match ACPI ID and data\n" ); -return -ENODEV ; - } - axp20x->variant = (long )acpi_id->driver_data; - } - + axp20x->variant = (long )device_get_match_data (dev);switch (axp20x->variant) {case AXP152_ID : axp20x->nr_cells =ARRAY_SIZE (axp152_cells);drivers/mfd/hi6421-pmic-core.c +3
-6@@ -15,8 +15,9 @@#include <linux/mfd/core.h> #include <linux/mfd/hi6421-pmic.h> #include <linux/module.h> -#include <linux/of_device.h> +#include <linux/of.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/regmap.h> static const struct mfd_cell hi6421_devs[] = {@@ -50,16 +51,12 @@ MODULE_DEVICE_TABLE(of, of_hi6421_pmic_match);static int hi6421_pmic_probe (struct platform_device *pdev) {struct hi6421_pmic *pmic; -const struct of_device_id *id;const struct mfd_cell *subdevs;enum hi6421_type type;void __iomem *base;int n_subdevs, ret; - id =of_match_device (of_hi6421_pmic_match, &pdev->dev); -if (!id) -return -EINVAL ; - type = (uintptr_t )id->data; + type = (uintptr_t )device_get_match_data (&pdev->dev); pmic =devm_kzalloc (&pdev->dev,sizeof (*pmic),GFP_KERNEL );if (!pmic)drivers/mfd/mxs-lradc.c +2
-7@@ -16,8 +16,8 @@#include <linux/mfd/mxs-lradc.h> #include <linux/module.h> #include <linux/of.h> -#include <linux/of_device.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/slab.h> #define ADC_CELL 0@@ -125,7 +125,6 @@ MODULE_DEVICE_TABLE(of, mxs_lradc_dt_ids);static int mxs_lradc_probe (struct platform_device *pdev) { -const struct of_device_id *of_id;struct device *dev = &pdev->dev;struct device_node *node = dev->of_node;struct mxs_lradc *lradc;@@ -138,11 +137,7 @@ static int mxs_lradc_probe(struct platform_device *pdev)if (!lradc)return -ENOMEM ; - of_id =of_match_device (mxs_lradc_dt_ids, &pdev->dev); -if (!of_id) -return -EINVAL ; - - lradc->soc = (uintptr_t )of_id->data; + lradc->soc = (enum mxs_lradc_id )device_get_match_data (&pdev->dev); lradc->clk =devm_clk_get (&pdev->dev,NULL );if (IS_ERR (lradc->clk)) {drivers/mfd/qcom-spmi-pmic.c +4
-2@@ -8,10 +8,12 @@#include <linux/gfp.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_platform.h> #include <linux/spmi.h> #include <linux/types.h> #include <linux/regmap.h> -#include <linux/of_platform.h> #include <soc/qcom/qcom-spmi-pmic.h> #define PMIC_REV2 0x101@@ -236,7 +238,7 @@ static int pmic_spmi_probe(struct spmi_device *sdev)if (!ctx)return -ENOMEM ; - ctx->num_usids = (uintptr_t )of_device_get_match_data (&sdev->dev); + ctx->num_usids = (uintptr_t )device_get_match_data (&sdev->dev);/* Only the first slave id for a PMIC contains this information */ if (sdev->usid % ctx->num_usids ==0 ) {drivers/mfd/qcom_rpm.c +4
-4@@ -7,6 +7,8 @@#include <linux/module.h> #include <linux/platform_device.h> +#include <linux/property.h> +#include <linux/of.h> #include <linux/of_platform.h> #include <linux/io.h> #include <linux/interrupt.h> @@ -528,7 +530,6 @@ static irqreturn_t qcom_rpm_wakeup_interrupt(int irq, void *dev)static int qcom_rpm_probe (struct platform_device *pdev) { -const struct of_device_id *match;struct device_node *syscon_np;struct qcom_rpm *rpm;u32 fw_version[3 ];@@ -570,10 +571,9 @@ static int qcom_rpm_probe(struct platform_device *pdev)if (irq_wakeup <0 )return irq_wakeup; - match =of_match_device (qcom_rpm_of_match, &pdev->dev); -if (!match) + rpm->data =device_get_match_data (&pdev->dev); +if (!rpm->data)return -ENODEV ; - rpm->data = match->data; rpm->status_regs =devm_platform_get_and_ioremap_resource (pdev,0 ,NULL );if (IS_ERR (rpm->status_regs))drivers/mfd/tps65910.c +2
-9@@ -19,7 +19,7 @@#include <linux/regmap.h> #include <linux/mfd/tps65910.h> #include <linux/of.h> -#include <linux/of_device.h> +#include <linux/property.h> static const struct resource rtc_resources[] = { {@@ -374,16 +374,9 @@ static struct tps65910_board *tps65910_parse_dt(struct i2c_client *client,struct device_node *np = client->dev.of_node;struct tps65910_board *board_info;unsigned int prop; -const struct of_device_id *match;int ret; - match =of_match_device (tps65910_of_match, &client->dev); -if (!match) { -dev_err (&client->dev,"Failed to find matching dt id\n" ); -return NULL ; - } - - *chip_id = (unsigned long )match->data; + *chip_id = (unsigned long )device_get_match_data (&client->dev); board_info =devm_kzalloc (&client->dev,sizeof (*board_info),GFP_KERNEL );drivers/mfd/twl4030-power.c +3
-6@@ -27,8 +27,8 @@#include <linux/pm.h> #include <linux/mfd/twl.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/of.h> -#include <linux/of_device.h> #include <asm/mach-types.h> @@ -883,7 +883,6 @@ static int twl4030_power_probe(struct platform_device *pdev) {const struct twl4030_power_data *pdata =dev_get_platdata (&pdev->dev);struct device_node *node = pdev->dev.of_node; -const struct of_device_id *match;int err =0 ;int err2 =0 ;u8 val;@@ -904,10 +903,8 @@ static int twl4030_power_probe(struct platform_device *pdev)return err; } - match =of_match_device (of_match_ptr (twl4030_power_of_match), - &pdev->dev); -if (match && match->data) - pdata = match->data; +if (node) + pdata =device_get_match_data (&pdev->dev);if (pdata) { err =twl4030_power_configure_scripts (pdata);drivers/mfd/twl6030-irq.c +5
-6@@ -24,10 +24,10 @@#include <linux/kthread.h> #include <linux/mfd/twl.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/suspend.h> #include <linux/of.h> #include <linux/irqdomain.h> -#include <linux/of_device.h> #include "twl-core.h" @@ -368,10 +368,10 @@ int twl6030_init_irq(struct device *dev, int irq_num)int nr_irqs;int status;u8 mask[3 ]; -const struct of_device_id *of_id; +const int *irq_tbl; - of_id =of_match_device (twl6030_of_match, dev); -if (!of_id || !of_id->data) { + irq_tbl =device_get_match_data (dev); +if (!irq_tbl) {dev_err (dev,"Unknown TWL device model\n" );return -EINVAL ; }@@ -409,7 +409,7 @@ int twl6030_init_irq(struct device *dev, int irq_num) twl6030_irq->pm_nb.notifier_call = twl6030_irq_pm_notifier;atomic_set (&twl6030_irq->wakeirqs,0 ); - twl6030_irq->irq_mapping_tbl = of_id->data; + twl6030_irq->irq_mapping_tbl = irq_tbl; twl6030_irq->irq_domain = irq_domain_add_linear(node, nr_irqs, --2.42.0
Quoted 7 lines · Chen-Yu Tsai
Quoted 5 lines · Rob Herring
Use preferred
device_get_match_data()instead ofof_match_device()to get the driver match data. With this, adjust the includes to explicitly include the correct headers.
Quoted 5 lines
Quoted 3 lines
Signed-off-by Rob Herring <[email protected]>--- drivers/mfd/axp20x.c | 22 +++-------------------I'd keep the error message, but otherwise for axp20x,
Why? It can't happen. We already matched successfully in order to probe, so matching again in probe is redundant and won't fail.
Quoted 1 line
Reviewed-by Chen-Yu Tsai <[email protected]>
Thanks.
Rob
Lee Jones
maintainerQuoted 6 lines · Chen-Yu Tsai
Quoted 5 lines · Rob Herring
Use preferred
device_get_match_data()instead ofof_match_device()to get the driver match data. With this, adjust the includes to explicitly include the correct headers.
Quoted 16 lines
Quoted 3 lines
Signed-off-by Rob Herring <[email protected]>--- drivers/mfd/axp20x.c | 22 +++-------------------I'd keep the error message, but otherwise for axp20x,
Reviewed-by Chen-Yu Tsai <[email protected]>Quoted 8 lines
drivers/mfd/hi6421-pmic-core.c | 9 +++------ drivers/mfd/mxs-lradc.c | 9 ++------- drivers/mfd/qcom-spmi-pmic.c | 6 ++++-- drivers/mfd/qcom_rpm.c | 8 ++++---- drivers/mfd/tps65910.c | 11 ++--------- drivers/mfd/twl4030-power.c | 9 +++------ drivers/mfd/twl6030-irq.c | 10 +++++----- 8 files changed, 26 insertions(+), 58 deletions(-)
FYI, this patch is not in my inbox.
Signature · 1 line
Lee Jones [李琼斯]
Quoted 26 lines · Lee Jones
Quoted 6 lines · Chen-Yu Tsai
Quoted 5 lines · Rob Herring
Use preferred
device_get_match_data()instead ofof_match_device()to get the driver match data. With this, adjust the includes to explicitly include the correct headers.Quoted 16 lines
Quoted 3 lines
Signed-off-by Rob Herring <[email protected]>--- drivers/mfd/axp20x.c | 22 +++-------------------I'd keep the error message, but otherwise for axp20x,
Reviewed-by Chen-Yu Tsai <[email protected]>Quoted 8 lines
drivers/mfd/hi6421-pmic-core.c | 9 +++------ drivers/mfd/mxs-lradc.c | 9 ++------- drivers/mfd/qcom-spmi-pmic.c | 6 ++++-- drivers/mfd/qcom_rpm.c | 8 ++++---- drivers/mfd/tps65910.c | 11 ++--------- drivers/mfd/twl4030-power.c | 9 +++------ drivers/mfd/twl6030-irq.c | 10 +++++----- 8 files changed, 26 insertions(+), 58 deletions(-)
Quoted 1 line
FYI, this patch is not in my inbox.
There seems to be some issue with kernel.org delivering my mails. You are not the only one. I thought it was just ones with large numbers of recipients, but seems to be something else. Konstantin has been looking into it. Do you see any pattern of mails you do receive from me? Sent via google vs. kernel.org?
Rob
Lee Jones
maintainerQuoted 27 lines · Rob Herring
Quoted 26 lines · Lee Jones
Quoted 22 lines · Chen-Yu Tsai
Quoted 8 lines · Rob Herring
Use preferred
device_get_match_data()instead ofof_match_device()to get the driver match data. With this, adjust the includes to explicitly include the correct headers.Signed-off-by Rob Herring <[email protected]>--- drivers/mfd/axp20x.c | 22 +++-------------------I'd keep the error message, but otherwise for axp20x,
Reviewed-by Chen-Yu Tsai <[email protected]>Quoted 8 lines
drivers/mfd/hi6421-pmic-core.c | 9 +++------ drivers/mfd/mxs-lradc.c | 9 ++------- drivers/mfd/qcom-spmi-pmic.c | 6 ++++-- drivers/mfd/qcom_rpm.c | 8 ++++---- drivers/mfd/tps65910.c | 11 ++--------- drivers/mfd/twl4030-power.c | 9 +++------ drivers/mfd/twl6030-irq.c | 10 +++++----- 8 files changed, 26 insertions(+), 58 deletions(-)
Quoted 7 lines
Quoted 1 line
FYI, this patch is not in my inbox.
There seems to be some issue with kernel.org delivering my mails. You are not the only one. I thought it was just ones with large numbers of recipients, but seems to be something else. Konstantin has been looking into it. Do you see any pattern of mails you do receive from me? Sent via google vs. kernel.org?
How would I know which emails I haven't received from you? :)
This is the only one that I'm aware of.
Signature · 1 line
Lee Jones [李琼斯]
Quoted 32 lines · Lee Jones
Quoted 29 lines · Rob Herring
Quoted 27 lines · Lee Jones
Quoted 6 lines · Chen-Yu Tsai
Quoted 5 lines · Rob Herring
Use preferred
device_get_match_data()instead ofof_match_device()to get the driver match data. With this, adjust the includes to explicitly include the correct headers.Quoted 16 lines
Quoted 3 lines
Signed-off-by Rob Herring <[email protected]>--- drivers/mfd/axp20x.c | 22 +++-------------------I'd keep the error message, but otherwise for axp20x,
Reviewed-by Chen-Yu Tsai <[email protected]>Quoted 8 lines
drivers/mfd/hi6421-pmic-core.c | 9 +++------ drivers/mfd/mxs-lradc.c | 9 ++------- drivers/mfd/qcom-spmi-pmic.c | 6 ++++-- drivers/mfd/qcom_rpm.c | 8 ++++---- drivers/mfd/tps65910.c | 11 ++--------- drivers/mfd/twl4030-power.c | 9 +++------ drivers/mfd/twl6030-irq.c | 10 +++++----- 8 files changed, 26 insertions(+), 58 deletions(-)FYI, this patch is not in my inbox.
Quoted 7 lines
Quoted 5 lines
There seems to be some issue with kernel.org delivering my mails. You are not the only one. I thought it was just ones with large numbers of recipients, but seems to be something else. Konstantin has been looking into it. Do you see any pattern of mails you do receive from me? Sent via google vs. kernel.org?
How would I know which emails I haven't received from you? :)
Compare what you have to this:
https://lore.kernel.org/all/?q=f%3Arobh+tc%3Alee%40kernel.org
Rob