Skip to contentSkip to conversation

FAILED: patch "[PATCH] serial: 8250_omap: Fix errors with no_console_suspend" failed to apply to 5.10-stable tree

PATCH [email protected] 1 participant 1 message Oct 15, 2023

Subsystems (2)
Stable branch TTY layer and serial drivers
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x 560706eff7c8e5621b0d63afe0866e0e1906e87e
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2023101500-climate-unvaried-dca3@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 560706eff7c8e5621b0d63afe0866e0e1906e87e Mon Sep 17 00:00:00 2001
From: Tony Lindgren <[email protected]>
Date: Tue, 26 Sep 2023 09:13:17 +0300
Subject: [PATCH] serial: 8250_omap: Fix errors with no_console_suspend

We now get errors on system suspend if no_console_suspend is set as reported by Thomas. The errors started with commit 20a41a62618d ("serial:
8250_omap: Use force_suspend and resume for system suspend").

Let's fix the issue by checking for console_suspend_enabled in the system suspend and resume path.

Note that with this fix the checks for console_suspend_enabled in omap8250_runtime_suspend() become useless. We now keep runtime PM usage count for an attached kernel console starting with commit bedb404e91bb ("serial: 8250_port: Don't use power management for kernel console").

Fixes 20a41a62618d ("serial: 8250_omap: Use force_suspend and resume for system suspend")
Cc stable <[email protected]>
Cc Udit Kumar <[email protected]>
Reported-by Thomas Richard <[email protected]>
Signed-off-by Tony Lindgren <[email protected]>
Tested-by Thomas Richard <[email protected]>
Reviewed-by Dhruva Gole <[email protected]>
Link https://lore.kernel.org/r/[email protected] open here
Signed-off-by Greg Kroah-Hartman <[email protected]>
drivers/tty/serial/8250/8250_omap.c +10 -15
index 26dd089d8e82..ca972fd37725 100644
@@ -1617,7 +1617,7 @@ static int omap8250_suspend(struct device *dev)
 {
 	struct omap8250_priv *priv = dev_get_drvdata(dev);
 	struct uart_8250_port *up = serial8250_get_port(priv->line);
-	int err;
+	int err = 0;
 
 	serial8250_suspend_port(priv->line);
 

@@ -1627,7 +1627,8 @@ static int omap8250_suspend(struct device *dev)
 	if (!device_may_wakeup(dev))
 		priv->wer = 0;
 	serial_out(up, UART_OMAP_WER, priv->wer);
-	err = pm_runtime_force_suspend(dev);
+	if (uart_console(&up->port) && console_suspend_enabled)
+		err = pm_runtime_force_suspend(dev);
 	flush_work(&priv->qos_work);
 
 	return err;

@@ -1636,11 +1637,15 @@ static int omap8250_suspend(struct device *dev)
 static int omap8250_resume(struct device *dev)
 {
 	struct omap8250_priv *priv = dev_get_drvdata(dev);
+	struct uart_8250_port *up = serial8250_get_port(priv->line);
 	int err;
 
-	err = pm_runtime_force_resume(dev);
-	if (err)
-		return err;
+	if (uart_console(&up->port) && console_suspend_enabled) {
+		err = pm_runtime_force_resume(dev);
+		if (err)
+			return err;
+	}
+
 	serial8250_resume_port(priv->line);
 	/* Paired with pm_runtime_resume_and_get() in omap8250_suspend() */
 	pm_runtime_mark_last_busy(dev);

@@ -1717,16 +1722,6 @@ static int omap8250_runtime_suspend(struct device *dev)
 
 	if (priv->line >= 0)
 		up = serial8250_get_port(priv->line);
-	/*
-	 * When using 'no_console_suspend', the console UART must not be
-	 * suspended. Since driver suspend is managed by runtime suspend,
-	 * preventing runtime suspend (by returning error) will keep device
-	 * active during suspend.
-	 */
-	if (priv->is_suspending && !console_suspend_enabled) {
-		if (up && uart_console(&up->port))
-			return -EBUSY;
-	}
 
 	if (priv->habit & UART_ERRATA_CLOCK_DISABLE) {
 		int ret;