Skip to contentSkip to conversation

SDM670 display subsystem support

PATCH Applied Richard Acayan 4 participants 11 messages Oct 17, 2023 – Dec 17, 2023

Subsystems (6)
lore
Share & tools
lore
#0 lore raw

v4 cover SDM670 display subsystem support

Changes since v3 ([email protected]):
- move status properties down (review tag retained) (6/6)
- accumulate review tag (3/6)

Changes since v2 ([email protected]):
- rebase on series and reference generic sblk definitions (5/6)
- add interconnects properties in example (3/6)
- remove phy-names properties from dtsi (6/6)
- accumulate review tags (4/6, 6/6)

Changes since v1 ([email protected]):
- prefix dsi1 labels with mdss_ in example dts (3/6)
- make all parts of catalog entry const (5/6)
- add spaces before closing brackets on same line (5/6)
- join opening and closing braces on the same line in dsc array (5/6)

This series adds support for the display subsystem on the Snapdragon
670. It is based on an earlier patch a few versions back, which had missing device tree bindings and device tree changes.

There is a separate IOMMU patch which adds the MDSS compatible to a workaround.

This series depends on https://patchwork.freedesktop.org/series/119804/.

Richard Acayan (6):
dt-bindings: display/msm: dsi-controller-main: add SDM670 compatible
dt-bindings: display/msm: sdm845-dpu: Describe SDM670
dt-bindings: display: msm: Add SDM670 MDSS
drm/msm: mdss: add support for SDM670
drm/msm/dpu: Add hw revision 4.1 (SDM670)
arm64: dts: qcom: sdm670: add display subsystem

 .../display/msm/dsi-controller-main.yaml      |   1 +
 .../display/msm/qcom,sdm670-mdss.yaml         | 292 ++++++++++++++++++
 .../bindings/display/msm/qcom,sdm845-dpu.yaml |   4 +-
 arch/arm64/boot/dts/qcom/sdm670.dtsi          | 292 ++++++++++++++++++
 .../msm/disp/dpu1/catalog/dpu_4_1_sdm670.h    | 104 +++++++
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    |   1 +
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    |   1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       |   1 +
 drivers/gpu/drm/msm/msm_mdss.c                |   7 +
 9 files changed, 702 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sdm670-mdss.yaml
 create mode 100644 drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_1_sdm670.h
Signature · 1 line
2.42.0
#1 lore raw

PATCH v4 1/6 dt-bindings: display/msm: dsi-controller-main: add SDM670 compatible

The SDM670 has DSI ports. Add the compatible for the controller.

---
 .../devicetree/bindings/display/msm/dsi-controller-main.yaml     | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml +1 -0
index c6dbab65d5f7..887c7dcaf438 100644
@@ -25,6 +25,7 @@ properties:
               - qcom,sc7180-dsi-ctrl
               - qcom,sc7280-dsi-ctrl
               - qcom,sdm660-dsi-ctrl
+              - qcom,sdm670-dsi-ctrl
               - qcom,sdm845-dsi-ctrl
               - qcom,sm6115-dsi-ctrl
               - qcom,sm6125-dsi-ctrl
Signature · 1 line
2.42.0
#2 lore raw

PATCH v4 2/6 dt-bindings: display/msm: sdm845-dpu: Describe SDM670

In reply to Richard Acayan

The SDM670 display controller has the same requirements as the SDM845 display controller, despite having distinct properties as described in the catalog. Add the compatible for SDM670 to the SDM845 controller.

---
 .../devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml      | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/display/msm/qcom,sdm845-dpu.yaml +3 -1
index b917064bdf33..dc11fd421a27 100644
@@ -13,7 +13,9 @@ $ref: /schemas/display/msm/dpu-common.yaml#
 
 properties:
   compatible:
-    const: qcom,sdm845-dpu
+    enum:
+      - qcom,sdm670-dpu
+      - qcom,sdm845-dpu
 
   reg:
     items:
Signature · 1 line
2.42.0
#3 lore raw

PATCH v4 3/6 dt-bindings: display: msm: Add SDM670 MDSS

In reply to Richard Acayan

Add documentation for the SDM670 display subsystem, adapted from the SDM845 and SM6125 documentation.

---
 .../display/msm/qcom,sdm670-mdss.yaml         | 292 ++++++++++++++++++
 1 file changed, 292 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sdm670-mdss.yaml
Documentation/devicetree/bindings/display/msm/qcom,sdm670-mdss.yaml new file +292 -0
new file mode 100644
index 000000000000..7dc269322b8e
@@ -0,0 +1,292 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/qcom,sdm670-mdss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SDM670 Display MDSS
+
+maintainers:
+  - Richard Acayan <[email protected]>
+
+description:
+  SDM670 MSM Mobile Display Subsystem (MDSS), which encapsulates sub-blocks
+  like DPU display controller, DSI and DP interfaces etc.
+
+$ref: /schemas/display/msm/mdss-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,sdm670-mdss
+
+  clocks:
+    items:
+      - description: Display AHB clock from gcc
+      - description: Display core clock
+
+  clock-names:
+    items:
+      - const: iface
+      - const: core
+
+  iommus:
+    maxItems: 2
+
+  interconnects:
+    maxItems: 2
+
+  interconnect-names:
+    maxItems: 2
+
+patternProperties:
+  "^display-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sdm670-dpu
+
+  "^displayport-controller@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,sdm670-dp
+
+  "^dsi@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        contains:
+          const: qcom,sdm670-dsi-ctrl
+
+  "^phy@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: qcom,dsi-phy-10nm
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interconnect/qcom,sdm670-rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    display-subsystem@ae00000 {
+        compatible = "qcom,sdm670-mdss";
+        reg = <0x0ae00000 0x1000>;
+        reg-names = "mdss";
+        power-domains = <&dispcc MDSS_GDSC>;
+
+        clocks = <&gcc GCC_DISP_AHB_CLK>,
+                 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+        clock-names = "iface", "core";
+
+        interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+
+        interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mem_noc SLAVE_EBI_CH0 0>,
+                        <&mmss_noc MASTER_MDP_PORT1 0 &mem_noc SLAVE_EBI_CH0 0>;
+        interconnect-names = "mdp0-mem", "mdp1-mem";
+
+        iommus = <&apps_smmu 0x880 0x8>,
+                 <&apps_smmu 0xc80 0x8>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        display-controller@ae01000 {
+            compatible = "qcom,sdm670-dpu";
+            reg = <0x0ae01000 0x8f000>,
+                  <0x0aeb0000 0x2008>;
+            reg-names = "mdp", "vbif";
+
+            clocks = <&gcc GCC_DISP_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_AXI_CLK>,
+                     <&dispcc DISP_CC_MDSS_MDP_CLK>,
+                     <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+            clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <0>;
+            power-domains = <&rpmhpd SDM670_CX>;
+            operating-points-v2 = <&mdp_opp_table>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    dpu_intf1_out: endpoint {
+                        remote-endpoint = <&mdss_dsi0_in>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    dpu_intf2_out: endpoint {
+                        remote-endpoint = <&mdss_dsi1_in>;
+                    };
+                };
+            };
+        };
+
+        dsi@ae94000 {
+            compatible = "qcom,sdm670-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae94000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <4>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+            assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SDM670_CX>;
+
+            phys = <&mdss_dsi0_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdss_dsi0_in: endpoint {
+                        remote-endpoint = <&dpu_intf1_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss_dsi0_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        mdss_dsi0_phy: phy@ae94400 {
+            compatible = "qcom,dsi-phy-10nm";
+            reg = <0x0ae94400 0x200>,
+                  <0x0ae94600 0x280>,
+                  <0x0ae94a00 0x1e0>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+
+        dsi@ae96000 {
+            compatible = "qcom,sdm670-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+            reg = <0x0ae96000 0x400>;
+            reg-names = "dsi_ctrl";
+
+            interrupt-parent = <&mdss>;
+            interrupts = <5>;
+
+            clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+                     <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+                     <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+                     <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+                     <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&dispcc DISP_CC_MDSS_AXI_CLK>;
+            clock-names = "byte",
+                          "byte_intf",
+                          "pixel",
+                          "core",
+                          "iface",
+                          "bus";
+            assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+                              <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+            assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+
+            operating-points-v2 = <&dsi_opp_table>;
+            power-domains = <&rpmhpd SDM670_CX>;
+
+            phys = <&dsi1_phy>;
+            phy-names = "dsi";
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    mdss_dsi1_in: endpoint {
+                        remote-endpoint = <&dpu_intf2_out>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    mdss_dsi1_out: endpoint {
+                    };
+                };
+            };
+        };
+
+        mdss_dsi1_phy: phy@ae96400 {
+            compatible = "qcom,dsi-phy-10nm";
+            reg = <0x0ae96400 0x200>,
+                  <0x0ae96600 0x280>,
+                  <0x0ae96a00 0x10e>;
+            reg-names = "dsi_phy",
+                        "dsi_phy_lane",
+                        "dsi_pll";
+
+            #clock-cells = <1>;
+            #phy-cells = <0>;
+
+            clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                     <&rpmhcc RPMH_CXO_CLK>;
+            clock-names = "iface", "ref";
+            vdds-supply = <&vreg_dsi_phy>;
+        };
+    };
+...
Signature · 1 line
2.42.0
#4 lore raw

PATCH v4 4/6 drm/msm: mdss: add support for SDM670

In reply to Richard Acayan

Add support for the MDSS block on the SDM670 platform.

---
 drivers/gpu/drm/msm/msm_mdss.c | 7 +++++++
 1 file changed, 7 insertions(+)
drivers/gpu/drm/msm/msm_mdss.c +7 -0
index 2e87dd6cb17b..2afb843271aa 100644
@@ -551,6 +551,12 @@ static const struct msm_mdss_data sc8280xp_data = {
 	.macrotile_mode = 1,
 };
 
+static const struct msm_mdss_data sdm670_data = {
+	.ubwc_enc_version = UBWC_2_0,
+	.ubwc_dec_version = UBWC_2_0,
+	.highest_bank_bit = 1,
+};
+
 static const struct msm_mdss_data sdm845_data = {
 	.ubwc_enc_version = UBWC_2_0,
 	.ubwc_dec_version = UBWC_2_0,
@@ -609,6 +615,7 @@ static const struct of_device_id mdss_dt_match[] = {
 	{ .compatible = "qcom,mdss" },
 	{ .compatible = "qcom,msm8998-mdss", .data = &msm8998_data },
 	{ .compatible = "qcom,qcm2290-mdss", .data = &qcm2290_data },
+	{ .compatible = "qcom,sdm670-mdss", .data = &sdm670_data },
 	{ .compatible = "qcom,sdm845-mdss", .data = &sdm845_data },
 	{ .compatible = "qcom,sc7180-mdss", .data = &sc7180_data },
 	{ .compatible = "qcom,sc7280-mdss", .data = &sc7280_data },
Signature · 1 line
2.42.0
#5 lore raw

PATCH v4 5/6 drm/msm/dpu: Add hw revision 4.1 (SDM670)

In reply to Richard Acayan

The Snapdragon 670 uses similar clocks (with one frequency added) to the Snapdragon 845 but reports DPU revision 4.1. Add support for this DPU with configuration from the Pixel 3a downstream kernel.

Since revision 4.0 is SDM845, reuse some configuration from its catalog entry.

---
 .../msm/disp/dpu1/catalog/dpu_4_1_sdm670.h    | 104 ++++++++++++++++++
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    |   1 +
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    |   1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       |   1 +
 4 files changed, 107 insertions(+)
 create mode 100644 drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_1_sdm670.h
drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_1_sdm670.h new file +104 -0
new file mode 100644
index 000000000000..cbbdaebe357e
@@ -0,0 +1,104 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022. Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2023, Richard Acayan. All rights reserved.
+ */
+
+#ifndef _DPU_4_1_SDM670_H
+#define _DPU_4_1_SDM670_H
+
+static const struct dpu_mdp_cfg sdm670_mdp = {
+	.name = "top_0",
+	.base = 0x0, .len = 0x45c,
+	.features = BIT(DPU_MDP_AUDIO_SELECT),
+	.clk_ctrls = {
+		[DPU_CLK_CTRL_VIG0] = { .reg_off = 0x2ac, .bit_off = 0 },
+		[DPU_CLK_CTRL_VIG1] = { .reg_off = 0x2b4, .bit_off = 0 },
+		[DPU_CLK_CTRL_DMA0] = { .reg_off = 0x2ac, .bit_off = 8 },
+		[DPU_CLK_CTRL_DMA1] = { .reg_off = 0x2b4, .bit_off = 8 },
+		[DPU_CLK_CTRL_DMA2] = { .reg_off = 0x2bc, .bit_off = 8 },
+	},
+};
+
+static const struct dpu_sspp_cfg sdm670_sspp[] = {
+	{
+		.name = "sspp_0", .id = SSPP_VIG0,
+		.base = 0x4000, .len = 0x1c8,
+		.features = VIG_SDM845_MASK_SDMA,
+		.sblk = &dpu_vig_sblk_qseed3_1_3,
+		.xin_id = 0,
+		.type = SSPP_TYPE_VIG,
+		.clk_ctrl = DPU_CLK_CTRL_VIG0,
+	}, {
+		.name = "sspp_1", .id = SSPP_VIG1,
+		.base = 0x6000, .len = 0x1c8,
+		.features = VIG_SDM845_MASK_SDMA,
+		.sblk = &dpu_vig_sblk_qseed3_1_3,
+		.xin_id = 4,
+		.type = SSPP_TYPE_VIG,
+		.clk_ctrl = DPU_CLK_CTRL_VIG0,
+	}, {
+		.name = "sspp_8", .id = SSPP_DMA0,
+		.base = 0x24000, .len = 0x1c8,
+		.features = DMA_SDM845_MASK_SDMA,
+		.sblk = &dpu_dma_sblk,
+		.xin_id = 1,
+		.type = SSPP_TYPE_DMA,
+		.clk_ctrl = DPU_CLK_CTRL_DMA0,
+	}, {
+		.name = "sspp_9", .id = SSPP_DMA1,
+		.base = 0x26000, .len = 0x1c8,
+		.features = DMA_CURSOR_SDM845_MASK_SDMA,
+		.sblk = &dpu_dma_sblk,
+		.xin_id = 5,
+		.type = SSPP_TYPE_DMA,
+		.clk_ctrl = DPU_CLK_CTRL_DMA1,
+	}, {
+		.name = "sspp_10", .id = SSPP_DMA2,
+		.base = 0x28000, .len = 0x1c8,
+		.features = DMA_CURSOR_SDM845_MASK_SDMA,
+		.sblk = &dpu_dma_sblk,
+		.xin_id = 9,
+		.type = SSPP_TYPE_DMA,
+		.clk_ctrl = DPU_CLK_CTRL_DMA2,
+	},
+};
+
+static const struct dpu_dsc_cfg sdm670_dsc[] = {
+	{
+		.name = "dsc_0", .id = DSC_0,
+		.base = 0x80000, .len = 0x140,
+	}, {
+		.name = "dsc_1", .id = DSC_1,
+		.base = 0x80400, .len = 0x140,
+	},
+};
+
+static const struct dpu_mdss_version sdm670_mdss_ver = {
+	.core_major_ver = 4,
+	.core_minor_ver = 1,
+};
+
+const struct dpu_mdss_cfg dpu_sdm670_cfg = {
+	.mdss_ver = &sdm670_mdss_ver,
+	.caps = &sdm845_dpu_caps,
+	.mdp = &sdm670_mdp,
+	.ctl_count = ARRAY_SIZE(sdm845_ctl),
+	.ctl = sdm845_ctl,
+	.sspp_count = ARRAY_SIZE(sdm670_sspp),
+	.sspp = sdm670_sspp,
+	.mixer_count = ARRAY_SIZE(sdm845_lm),
+	.mixer = sdm845_lm,
+	.pingpong_count = ARRAY_SIZE(sdm845_pp),
+	.pingpong = sdm845_pp,
+	.dsc_count = ARRAY_SIZE(sdm670_dsc),
+	.dsc = sdm670_dsc,
+	.intf_count = ARRAY_SIZE(sdm845_intf),
+	.intf = sdm845_intf,
+	.vbif_count = ARRAY_SIZE(sdm845_vbif),
+	.vbif = sdm845_vbif,
+	.perf = &sdm845_perf_data,
+};
+
+#endif
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c +1 -0
index be461586b108..84c29de9ad81 100644
@@ -614,6 +614,7 @@ static const struct dpu_qos_lut_entry sc7180_qos_nrt[] = {
 #include "catalog/dpu_3_0_msm8998.h"
 
 #include "catalog/dpu_4_0_sdm845.h"
+#include "catalog/dpu_4_1_sdm670.h"
 
 #include "catalog/dpu_5_0_sm8150.h"
 #include "catalog/dpu_5_1_sc8180x.h"
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h +1 -0
index ba262b3f0bdc..f59aec03269a 100644
@@ -824,6 +824,7 @@ struct dpu_mdss_cfg {
 
 extern const struct dpu_mdss_cfg dpu_msm8998_cfg;
 extern const struct dpu_mdss_cfg dpu_sdm845_cfg;
+extern const struct dpu_mdss_cfg dpu_sdm670_cfg;
 extern const struct dpu_mdss_cfg dpu_sm8150_cfg;
 extern const struct dpu_mdss_cfg dpu_sc8180x_cfg;
 extern const struct dpu_mdss_cfg dpu_sm8250_cfg;
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c +1 -0
index aa6ba2cf4b84..0049fb1de1e8 100644
@@ -1362,6 +1362,7 @@ static const struct dev_pm_ops dpu_pm_ops = {
 static const struct of_device_id dpu_dt_match[] = {
 	{ .compatible = "qcom,msm8998-dpu", .data = &dpu_msm8998_cfg, },
 	{ .compatible = "qcom,qcm2290-dpu", .data = &dpu_qcm2290_cfg, },
+	{ .compatible = "qcom,sdm670-dpu", .data = &dpu_sdm670_cfg, },
 	{ .compatible = "qcom,sdm845-dpu", .data = &dpu_sdm845_cfg, },
 	{ .compatible = "qcom,sc7180-dpu", .data = &dpu_sc7180_cfg, },
 	{ .compatible = "qcom,sc7280-dpu", .data = &dpu_sc7280_cfg, },
Signature · 1 line
2.42.0
Reviewed-by on v4 5/6
#6 lore raw

Re: [PATCH v4 5/6] drm/msm/dpu: Add hw revision 4.1 (SDM670)

Quoted 10 lines · Richard Acayan

The Snapdragon 670 uses similar clocks (with one frequency added) to the Snapdragon 845 but reports DPU revision 4.1. Add support for this DPU with configuration from the Pixel 3a downstream kernel.

Since revision 4.0 is SDM845, reuse some configuration from its catalog entry.

Quoted 7 lines
---
 .../msm/disp/dpu1/catalog/dpu_4_1_sdm670.h    | 104 ++++++++++++++++++
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c    |   1 +
 .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h    |   1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       |   1 +
 4 files changed, 107 insertions(+)
 create mode 100644 drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_1_sdm670.h
Signature · 2 lines
With best wishes
Dmitry
#7 lore raw

Re: [PATCH v4 5/6] drm/msm/dpu: Add hw revision 4.1 (SDM670)

In reply to Richard Acayan
kernel test robot noticed the following build errors:

Hi Richard,

kernel test robot noticed the following build errors:

[auto build test ERROR on drm-misc/drm-misc-next]
[also build test ERROR on drm/drm-next robh/for-next linus/master v6.6-rc6 next-20231018] [If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Richard-Acayan/dt-bindings-display-msm-dsi-controller-main-add-SDM670-compatible/20231017-155345
base:   git://anongit.freedesktop.org/drm/drm-misc drm-misc-next
patch link:    https://lore.kernel.org/r/20231017021805.1083350-14-mailingradian%40gmail.com
patch subject: [PATCH v4 5/6] drm/msm/dpu: Add hw revision 4.1 (SDM670)
config: sparc-allyesconfig (https://download.01.org/0day-ci/archive/20231019/[email protected]/config)
compiler: sparc64-linux-gcc (GCC) 13.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20231019/[email protected]/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/

All errors (new ones prefixed by >>):

In file included from drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c:658:

>> drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_1_sdm670.h:29:26: error: 'dpu_vig_sblk_qseed3_1_3' undeclared here (not in a function)
      29 |                 .sblk = &dpu_vig_sblk_qseed3_1_3,
         |                          ^~~~~~~~~~~~~~~~~~~~~~~
>> drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_1_sdm670.h:45:26: error: 'dpu_dma_sblk' undeclared here (not in a function); did you mean 'dpu_dsc_blk'?
      45 |                 .sblk = &dpu_dma_sblk,
         |                          ^~~~~~~~~~~~
         |                          dpu_dsc_blk

vim +/dpu_vig_sblk_qseed3_1_3 +29 drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_4_1_sdm670.h

    23	
    24	static const struct dpu_sspp_cfg sdm670_sspp[] = {
    25		{
    26			.name = "sspp_0", .id = SSPP_VIG0,
    27			.base = 0x4000, .len = 0x1c8,
    28			.features = VIG_SDM845_MASK_SDMA,
  > 29			.sblk = &dpu_vig_sblk_qseed3_1_3,
    30			.xin_id = 0,
    31			.type = SSPP_TYPE_VIG,
    32			.clk_ctrl = DPU_CLK_CTRL_VIG0,
    33		}, {
    34			.name = "sspp_1", .id = SSPP_VIG1,
    35			.base = 0x6000, .len = 0x1c8,
    36			.features = VIG_SDM845_MASK_SDMA,
    37			.sblk = &dpu_vig_sblk_qseed3_1_3,
    38			.xin_id = 4,
    39			.type = SSPP_TYPE_VIG,
    40			.clk_ctrl = DPU_CLK_CTRL_VIG0,
    41		}, {
    42			.name = "sspp_8", .id = SSPP_DMA0,
    43			.base = 0x24000, .len = 0x1c8,
    44			.features = DMA_SDM845_MASK_SDMA,
  > 45			.sblk = &dpu_dma_sblk,
    46			.xin_id = 1,
    47			.type = SSPP_TYPE_DMA,
    48			.clk_ctrl = DPU_CLK_CTRL_DMA0,
    49		}, {
    50			.name = "sspp_9", .id = SSPP_DMA1,
    51			.base = 0x26000, .len = 0x1c8,
    52			.features = DMA_CURSOR_SDM845_MASK_SDMA,
    53			.sblk = &dpu_dma_sblk,
    54			.xin_id = 5,
    55			.type = SSPP_TYPE_DMA,
    56			.clk_ctrl = DPU_CLK_CTRL_DMA1,
    57		}, {
    58			.name = "sspp_10", .id = SSPP_DMA2,
    59			.base = 0x28000, .len = 0x1c8,
    60			.features = DMA_CURSOR_SDM845_MASK_SDMA,
    61			.sblk = &dpu_dma_sblk,
    62			.xin_id = 9,
    63			.type = SSPP_TYPE_DMA,
    64			.clk_ctrl = DPU_CLK_CTRL_DMA2,
    65		},
    66	};
    67	
Signature · 2 lines
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
#8 lore raw

PATCH v4 6/6 arm64: dts: qcom: sdm670: add display subsystem

In reply to Richard Acayan

The Snapdragon 670 has a display subsystem for controlling and outputting to the display. Add support for it in the device tree.

---
 arch/arm64/boot/dts/qcom/sdm670.dtsi | 292 +++++++++++++++++++++++++++
 1 file changed, 292 insertions(+)
arch/arm64/boot/dts/qcom/sdm670.dtsi +292 -0
index 84cd2e39266f..94f5d1bcf1e3 100644
@@ -6,6 +6,7 @@
  * Copyright (c) 2022, Richard Acayan. All rights reserved.
  */
 
+#include <dt-bindings/clock/qcom,dispcc-sdm845.h>
 #include <dt-bindings/clock/qcom,gcc-sdm845.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/dma/qcom-gpi.h>
@@ -400,6 +401,30 @@ cpu6_opp10: opp-1996800000 {
 		};
 	};
 
+	dsi_opp_table: opp-table-dsi {
+		compatible = "operating-points-v2";
+
+		opp-19200000 {
+			opp-hz = /bits/ 64 <19200000>;
+			required-opps = <&rpmhpd_opp_min_svs>;
+		};
+
+		opp-180000000 {
+			opp-hz = /bits/ 64 <180000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-275000000 {
+			opp-hz = /bits/ 64 <275000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-358000000 {
+			opp-hz = /bits/ 64 <358000000>;
+			required-opps = <&rpmhpd_opp_svs_l1>;
+		};
+	};
+
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -1352,6 +1377,273 @@ spmi_bus: spmi@c440000 {
 			#interrupt-cells = <4>;
 		};
 
+		mdss: display-subsystem@ae00000 {
+			compatible = "qcom,sdm670-mdss";
+			reg = <0 0x0ae00000 0 0x1000>;
+			reg-names = "mdss";
+
+			power-domains = <&dispcc MDSS_GDSC>;
+
+			clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
+			clock-names = "iface", "core";
+
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interconnects = <&mmss_noc MASTER_MDP_PORT0 0 &mem_noc SLAVE_EBI_CH0 0>,
+					<&mmss_noc MASTER_MDP_PORT1 0 &mem_noc SLAVE_EBI_CH0 0>;
+			interconnect-names = "mdp0-mem", "mdp1-mem";
+
+			iommus = <&apps_smmu 0x880 0x8>,
+				 <&apps_smmu 0xc80 0x8>;
+
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			status = "disabled";
+
+			mdss_mdp: display-controller@ae01000 {
+				compatible = "qcom,sdm670-dpu";
+				reg = <0 0x0ae01000 0 0x8f000>,
+				      <0 0x0aeb0000 0 0x2008>;
+				reg-names = "mdp", "vbif";
+
+				clocks = <&gcc GCC_DISP_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_AXI_CLK>,
+					 <&dispcc DISP_CC_MDSS_MDP_CLK>,
+					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
+
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
+				operating-points-v2 = <&mdp_opp_table>;
+				power-domains = <&rpmhpd SDM670_CX>;
+
+				interrupt-parent = <&mdss>;
+				interrupts = <0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss_dsi0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						dpu_intf1_out: endpoint {
+							remote-endpoint = <&mdss_dsi1_in>;
+						};
+					};
+				};
+
+				mdp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-19200000 {
+						opp-hz = /bits/ 64 <19200000>;
+						required-opps = <&rpmhpd_opp_min_svs>;
+					};
+
+					opp-171428571 {
+						opp-hz = /bits/ 64 <171428571>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-358000000 {
+						opp-hz = /bits/ 64 <358000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-430000000 {
+						opp-hz = /bits/ 64 <430000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss_dsi0: dsi@ae94000 {
+				compatible = "qcom,sdm670-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae94000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <4>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi0_phy 0>,
+							 <&mdss_dsi0_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SDM670_CX>;
+
+				phys = <&mdss_dsi0_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi0_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi0_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi0_phy: phy@ae94400 {
+				compatible = "qcom,dsi-phy-10nm";
+				reg = <0 0x0ae94400 0 0x200>,
+				      <0 0x0ae94600 0 0x280>,
+				      <0 0x0ae94a00 0 0x1e0>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+
+			mdss_dsi1: dsi@ae96000 {
+				compatible = "qcom,sdm670-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
+				reg = <0 0x0ae96000 0 0x400>;
+				reg-names = "dsi_ctrl";
+
+				interrupt-parent = <&mdss>;
+				interrupts = <5>;
+
+				clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+					 <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+					 <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+					 <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+					 <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc DISP_CC_MDSS_AXI_CLK>;
+				clock-names = "byte",
+					      "byte_intf",
+					      "pixel",
+					      "core",
+					      "iface",
+					      "bus";
+				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+				assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
+
+				operating-points-v2 = <&dsi_opp_table>;
+				power-domains = <&rpmhpd SDM670_CX>;
+
+				phys = <&mdss_dsi1_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						mdss_dsi1_in: endpoint {
+							remote-endpoint = <&dpu_intf1_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						mdss_dsi1_out: endpoint {
+						};
+					};
+				};
+			};
+
+			mdss_dsi1_phy: phy@ae96400 {
+				compatible = "qcom,dsi-phy-10nm";
+				reg = <0 0x0ae96400 0 0x200>,
+				      <0 0x0ae96600 0 0x280>,
+				      <0 0x0ae96a00 0 0x10e>;
+				reg-names = "dsi_phy",
+					    "dsi_phy_lane",
+					    "dsi_pll";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+					 <&rpmhcc RPMH_CXO_CLK>;
+				clock-names = "iface", "ref";
+
+				status = "disabled";
+			};
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sdm845-dispcc";
+			reg = <0 0x0af00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_DISP_GPLL0_CLK_SRC>,
+				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+				 <&mdss_dsi0_phy 0>,
+				 <&mdss_dsi0_phy 1>,
+				 <&mdss_dsi1_phy 0>,
+				 <&mdss_dsi1_phy 1>,
+				 <0>,
+				 <0>;
+			clock-names = "bi_tcxo",
+				      "gcc_disp_gpll0_clk_src",
+				      "gcc_disp_gpll0_div_clk_src",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dsi1_phy_pll_out_byteclk",
+				      "dsi1_phy_pll_out_dsiclk",
+				      "dp_link_clk_divsel_ten",
+				      "dp_vco_divided_clk_src_mux";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		apps_smmu: iommu@15000000 {
 			compatible = "qcom,sdm670-smmu-500", "qcom,smmu-500", "arm,mmu-500";
 			reg = <0 0x15000000 0 0x80000>;
Signature · 1 line
2.42.0
#9 lore raw
In reply to Richard Acayan
Quoted 11 lines · Richard Acayan

Changes since v3 ([email protected]):
- move status properties down (review tag retained) (6/6)
- accumulate review tag (3/6)

Changes since v2 ([email protected]):
- rebase on series and reference generic sblk definitions (5/6)
- add interconnects properties in example (3/6)
- remove phy-names properties from dtsi (6/6)
- accumulate review tags (4/6, 6/6)

[...]

Applied, thanks!

[1/6] dt-bindings: display/msm: dsi-controller-main: add SDM670 compatible

      https://gitlab.freedesktop.org/lumag/msm/-/commit/bf5a80695311
[2/6] dt-bindings: display/msm: sdm845-dpu: Describe SDM670
      https://gitlab.freedesktop.org/lumag/msm/-/commit/0e1af3ec823b
[3/6] dt-bindings: display: msm: Add SDM670 MDSS
      https://gitlab.freedesktop.org/lumag/msm/-/commit/c965007970ed
[4/6] drm/msm: mdss: add support for SDM670
      https://gitlab.freedesktop.org/lumag/msm/-/commit/3c13a56e4353
[5/6] drm/msm/dpu: Add hw revision 4.1 (SDM670)
      https://gitlab.freedesktop.org/lumag/msm/-/commit/e140b7e496b7

Best regards,

Signature · 1 line
Dmitry Baryshkov <[email protected]>
maintainer Applied
#10 lore raw

Re: (subset) [PATCH v4 0/6] SDM670 display subsystem support

In reply to Richard Acayan
Quoted 11 lines · Richard Acayan

Changes since v3 ([email protected]):
- move status properties down (review tag retained) (6/6)
- accumulate review tag (3/6)

Changes since v2 ([email protected]):
- rebase on series and reference generic sblk definitions (5/6)
- add interconnects properties in example (3/6)
- remove phy-names properties from dtsi (6/6)
- accumulate review tags (4/6, 6/6)

[...]

Applied, thanks!

[6/6] arm64: dts: qcom: sdm670: add display subsystem

      commit: 5f8ba4f28ddb432c8a9720c337f9047e38fa7e36

Best regards,

Signature · 1 line
Bjorn Andersson <[email protected]>