This is continued work on Samsung S9(SM-9600) starqltechn

new file mode 100644
index 000000000000..b53d9f5a7d38
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/samsung,s2dos05.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung s2dos05 regulator
+
+maintainers:
+  - Dzmitry Sankouski <[email protected]>
+
+description: |
+  The S2DOS05 is a companion power management IC for the smart phones.
+  Has 4 LDO and 1 BUCK regulators, and has capability to measure
+  current and power. Can detect short circuit on outputs.
+
+properties:
+  compatible:
+    const: samsung,s2dos05pmic
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+    description: List of regulators and its properties
+
+    patternProperties:
+      "^s2dos05-buck1|s2dos05-ldo[1-4]$":
+        type: object
+        $ref: "regulator.yaml#"
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    regulator@60 {
+    	compatible = "samsung,s2dos05pmic";
+    	reg = <0x60>;
+    	pinctrl-names = "default";
+    	pinctrl-0 = <&s2dos05_irq>;
+    	s2dos05,s2dos05_int = <&tlmm 0x31 0x0>;
+
+    	regulators {
+    		s2dos05_ldo1: s2dos05-ldo1 {
+    			regulator-name = "s2dos05-ldo1";
+    			regulator-min-microvolt = <0x16e360>;
+    			regulator-max-microvolt = <0x1e8480>;
+    			regulator-active-discharge = <0x1>;
+    		};
+
+    		s2dos05_ldo2: s2dos05-ldo2 {
+    			regulator-name = "s2dos05-ldo2";
+    			regulator-min-microvolt = <0x1b7740>;
+    			regulator-max-microvolt = <0x1b7740>;
+    			regulator-active-discharge = <0x1>;
+    			regulator-boot-on;
+    		};
+
+    		s2dos05_ldo3: s2dos05-ldo3 {
+    			regulator-name = "s2dos05-ldo3";
+    			regulator-min-microvolt = <0x2dc6c0>;
+    			regulator-max-microvolt = <0x2dc6c0>;
+    			regulator-active-discharge = <0x1>;
+    			regulator-boot-on;
+    		};
+
+    		s2dos05_ldo4: s2dos05-ldo4 {
+    			regulator-name = "s2dos05-ldo4";
+    			regulator-min-microvolt = <0x2932e0>;
+    			regulator-max-microvolt = <0x399a18>;
+    			regulator-active-discharge = <0x1>;
+    		};
+
+    		s2dos05_buck1: s2dos05-buck1 {
+    			regulator-name = "s2dos05-buck1";
+    			regulator-min-microvolt = <0xcf850>;
+    			regulator-max-microvolt = <0x200b20>;
+    			regulator-active-discharge = <0x1>;
+    		};
+    	};
+    };

index 823f8e6e4801..ec18439edc6a 100644
@@ -1232,6 +1232,14 @@ config REGULATOR_RTQ6752
 	  synchronous boost converters for PAVDD, and one synchronous NAVDD
 	  buck-boost. This device is suitable for automotive TFT-LCD panel.
 
+config REGULATOR_S2DOS05
+	tristate "SLSI S2DOS05 regulator"
+	depends on I2C
+	help
+	  This driver provides support for the voltage regulators of the S2DOS05.
+	  The S2DOS05 is a companion power management IC for the smart phones.
+	  The S2DOS05 handles LDO and BUCK control
+
 config REGULATOR_S2MPA01
 	tristate "Samsung S2MPA01 voltage regulator"
 	depends on MFD_SEC_CORE || COMPILE_TEST

index 15e0d614ff66..b59f729b7af7 100644
@@ -145,6 +145,7 @@ obj-$(CONFIG_REGULATOR_RT6245)	+= rt6245-regulator.o
 obj-$(CONFIG_REGULATOR_RTMV20)	+= rtmv20-regulator.o
 obj-$(CONFIG_REGULATOR_RTQ2134) += rtq2134-regulator.o
 obj-$(CONFIG_REGULATOR_RTQ6752)	+= rtq6752-regulator.o
+obj-$(CONFIG_REGULATOR_S2DOS05) += s2dos05.o
 obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o
 obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
 obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o

index 7c2457948a32..e9fa230d11ec 100644
@@ -413,14 +413,6 @@ &usb_1_qmpphy {
 	status = "okay";
 };
 
-&wifi {
-	vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
-	vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
-	vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
-	vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
-	status = "okay";
-};
-
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <27 4>, <81 4>, <85 4>;
 

index e9fa230d11ec..3bc9ae5f6213 100644
@@ -11,11 +11,17 @@
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "sdm845.dtsi"
 
+/delete-node/ &rmtfs_mem;
+
 / {
 	chassis-type = "handset";
 	model = "Samsung Galaxy S9 SM-G9600";
 	compatible = "samsung,starqltechn", "qcom,sdm845";
 
+	aliases {
+		serial0 = &uart9;
+	};
+
 	chosen {
 		#address-cells = <2>;
 		#size-cells = <2>;

@@ -63,6 +69,96 @@ memory@a1300000 {
 			ftrace-size = <0x40000>;
 			pmsg-size = <0x40000>;
 		};
+
+		/* The rmtfs_mem needs to be guarded due to "XPU limitations"
+		 * it is otherwise possible for an allocation adjacent to the
+		 * rmtfs_mem region to trigger an XPU violation, causing a crash.
+		 */
+		rmtfs_lower_guard: memory@fde00000 {
+			no-map;
+			reg = <0 0xfde00000 0 0x1000>;
+		};
+
+		rmtfs_mem: rmtfs-mem@fde01000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0 0xfde01000 0 0x200000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <15>;
+		};
+
+		rmtfs_upper_guard: rmtfs-upper-guard@fe001000 {
+			no-map;
+			reg = <0 0xfe001000 0 0x1000>;
+		};
+
+		/*
+		 * It seems like reserving the old rmtfs_mem region is also needed to prevent
+		 * random crashes which are most likely modem related, more testing needed.
+		 */
+		removed_region: removed-region@88f00000 {
+			no-map;
+			reg = <0 0x88f00000 0 0x1c00000>;
+		};
+	};
+
+	i2c@21 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&tlmm 127 0x0>;
+		scl-gpios = <&tlmm 128 0x0>;
+		#i2c-gpio,delay-us = <0x2>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c21_sda &i2c21_scl>;
+
+		regulator@60 {
+			compatible = "samsung,s2dos05";
+			reg = <0x60>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&s2dos05_irq>;
+			s2dos05,s2dos05_int = <&tlmm 0x31 0x0>;
+
+			regulators {
+				s2dos05_ldo1: s2dos05-ldo1 {
+					regulator-name = "s2dos05-ldo1";
+					regulator-min-microvolt = <0x16e360>;
+					regulator-max-microvolt = <0x1e8480>;
+					regulator-active-discharge = <0x1>;
+				};
+
+				s2dos05_ldo2: s2dos05-ldo2 {
+					regulator-name = "s2dos05-ldo2";
+					regulator-min-microvolt = <0x1b7740>;
+					regulator-max-microvolt = <0x1b7740>;
+					regulator-active-discharge = <0x1>;
+					regulator-boot-on;
+				};
+
+				s2dos05_ldo3: s2dos05-ldo3 {
+					regulator-name = "s2dos05-ldo3";
+					regulator-min-microvolt = <0x2dc6c0>;
+					regulator-max-microvolt = <0x2dc6c0>;
+					regulator-active-discharge = <0x1>;
+					regulator-boot-on;
+				};
+
+				s2dos05_ldo4: s2dos05-ldo4 {
+					regulator-name = "s2dos05-ldo4";
+					regulator-min-microvolt = <0x2932e0>;
+					regulator-max-microvolt = <0x399a18>;
+					regulator-active-discharge = <0x1>;
+				};
+
+				s2dos05_buck1: s2dos05-buck1 {
+					regulator-name = "s2dos05-buck1";
+					regulator-min-microvolt = <0xcf850>;
+					regulator-max-microvolt = <0x200b20>;
+					regulator-active-discharge = <0x1>;
+				};
+			};
+		};
 	};
 };
 

@@ -130,8 +226,6 @@ vdda_pll_cc_ebi23:
 		vdda_sp_sensor:
 		vdda_ufs1_core:
 		vdda_ufs2_core:
-		vdda_usb1_ss_core:
-		vdda_usb2_ss_core:
 		vreg_l1a_0p875: ldo1 {
 			regulator-min-microvolt = <880000>;
 			regulator-max-microvolt = <880000>;

@@ -152,6 +246,7 @@ vreg_l3a_1p0: ldo3 {
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
+		vdda_usb1_ss_core:
 		vdd_wcss_cx:
 		vdd_wcss_mx:
 		vdda_wcss_pll:

@@ -360,6 +455,10 @@ &qupv3_id_1 {
 	status = "okay";
 };
 
+&gpi_dma1 {
+	status = "okay";
+};
+
 &uart9 {
 	status = "okay";
 };

@@ -386,13 +485,50 @@ &sdhc_2 {
 	status = "okay";
 };
 
+&i2c11 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	touchscreen@48 {
+		compatible = "samsung,s6sy761";
+		reg = <0x48>;
+		interrupt-parent = <&tlmm>;
+		interrupts = <120 0x0>;
+		vdd-supply = <&s2dos05_ldo2>;
+		avdd-supply = <&s2dos05_ldo3>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touch_irq>;
+	};
+};
+
+/* Modem/wifi*/
+&mss_pil {
+	status = "okay";
+	firmware-name = "qcom/sdm845/starqltechn/mba.mbn", "qcom/sdm845/starqltechn/modem.mbn";
+};
+
+&ipa {
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+	firmware-name = "qcom/sdm845/starqltechn/ipa_fws.mbn";
+	status = "okay";
+};
+
 &usb_1 {
 	status = "okay";
+	/*
+	 * disable USB3 clock requirement as the device only supports
+	 * USB2.
+	 */
+	qcom,select-utmi-as-pipe-clk;
 };
 
 &usb_1_dwc3 {
 	/* Until we have Type C hooked up we'll force this as peripheral. */
 	dr_mode = "peripheral";
+
+	maximum-speed = "high-speed";
 };
 
 &usb_1_hsphy {

@@ -444,4 +580,53 @@ sd_card_det_n_state: sd-card-det-n-state {
 		function = "gpio";
 		bias-pull-up;
 	};
+
+	s2dos05_irq: s2dos05_irq {
+		pinmux {
+			pins = "gpio49";
+			drive-strength = <0x2>;
+			bias-disable;
+		};
+	};
+
+	gpio_i2c21_default: gpio-i2c21-default {
+		pinmux {
+			pins = "gpio127", "gpio128";
+			function = "gpio";
+		};
+
+		i2c21_sda: i2c_sda {
+			pins = "gpio127";
+			drive-strength = <0x2>;
+			bias-disable;
+		};
+
+		i2c21_scl: i2c_scl {
+			pins = "gpio128";
+			drive-strength = <0x2>;
+			bias-disable;
+		};
+	};
+
+	touch_irq: touch-irq {
+		pins = "gpio120";
+		function = "gpio";
+		bias-disable;
+		input-enable;
+	};
+};
+
+&qup_uart9_tx {
+	drive-strength = <0x2>;
+	bias-pull-up;
+};
+
+&qup_uart9_rx {
+	drive-strength = <0x2>;
+	bias-pull-up;
+};
+
+&qup_i2c11_default {
+	drive-strength = <2>;
+	bias-disable;
 };

index 3bc9ae5f6213..58b765b4c41d 100644
@@ -502,6 +502,11 @@ touchscreen@48 {
 	};
 };
 
+&crypto {
+	/* FIXME: qce_start triggers an SError */
+	status = "disable";
+};
+
 /* Modem/wifi*/
 &mss_pil {
 	status = "okay";

index 58b765b4c41d..f6e3004fc445 100644
@@ -33,6 +33,9 @@ framebuffer: framebuffer@9d400000 {
 			height = <2960>;
 			stride = <(1440 * 4)>;
 			format = "a8r8g8b8";
+			vci-supply = <&s2dos05_ldo4>;
+			vddr-supply = <&s2dos05_buck1>;
+			vdd3-supply = <&s2dos05_ldo1>;
 		};
 	};