arm64: dts: qcom: sm8250-xiaomi-pipa: Add initial device tree
PATCH v7 1/1 arm64: dts: qcom: sm8250-xiaomi-pipa: Add initial device tree
Initial support for Xiaomi Pad 6 tablet, that have sm8250 soc.
Signed-off-by Luka Panio <[email protected]>
---
v2:
Update commit message. Drop reserved gpio's as this device in reality do not have gpio, and pins are not protected.
v3:
Update commit message.
v4:
Update commit message.
v5:
Update commit message.
v6:
Update commit message.
v7:
Fix typo in "chassis-type", remove useless newlines, update license
--- arch/arm64/boot/dts/qcom/Makefile | 1 + .../boot/dts/qcom/sm8250-xiaomi-pipa.dts | 623 ++++++++++++++++++ 2 files changed, 624 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts
arch/arm64/boot/dts/qcom/Makefile +1 -0
@@ -208,6 +208,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx203.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx206.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-xiaomi-elish-boe.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-xiaomi-elish-csot.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8250-xiaomi-pipa.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-microsoft-surface-duo2.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8350-mtp.dtb
arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts new file +623 -0
623 lines not on this page · raw message
Signature · 1 line
2.42.0
The v7 patch was sent outside of the patchset and to be ignored, sorry for that. Thanks,
Luka Panio