AllowedIPs = ::/0 routes IPv4 - on Android?
Hi List,
I have a WG endpoint configured with
AllowedIPs = ::/0
... on an Android phone.
To my surprise, I found out that this also tries to route IPv4 addresses to the other WG side.
I was able to change that with a single "bogus" IPv4 address, "AllowedIPs = ::/0, 192.0.2.99/32"
Is this a known feature? Android 13, WireGuard for Android v1.0.20230707, (from AOSP).
Best regards,
Valentijn
Hello Valentijn,
::/0 does not describe no IPv4 address, but all IP addresses. So when you write ::/0, all IPv4 addresses are routed through the tunnel. If you don't want IPv4 routes, you can simply omit them in AllowedIPs (so only put IPv6 addresses there, or only address which should go through the tunnel).
Greetings
Marek Küthe
Quoted 18 lines · On Tue, 5 Sep 2023 16:04:34 +0200 Valentijn Sessink <[email protected]> wrote:
Hi List,
I have a WG endpoint configured with
AllowedIPs = ::/0
... on an Android phone.To my surprise, I found out that this also tries to route IPv4 addresses to the other WG side.
I was able to change that with a single "bogus" IPv4 address, "AllowedIPs = ::/0, 192.0.2.99/32"
Is this a known feature? Android 13, WireGuard for Android v1.0.20230707, (from AOSP).
Best regards,
Valentijn
Signature · 3 lines
Marek Küthe [email protected] er/ihm he/him
Hello Marek,
since when does ::/0 refer to IPv4 addresses? To my knowledge, ::/0 is the IPv6 all route and does not include any IPv4.
Best regards,
Nico
Quoted 9 lines · Marek Küthe
[[PGP Signed Part:Undecided]]
Hello Valentijn,::/0 does not describe no IPv4 address, but all IP addresses. So when you write ::/0, all IPv4 addresses are routed through the tunnel. If you don't want IPv4 routes, you can simply omit them in AllowedIPs (so only put IPv6 addresses there, or only address which should go through the tunnel).
Quoted 24 lines
Greetings
Marek KütheQuoted 18 lines · On Tue, 5 Sep 2023 16:04:34 +0200 Valentijn Sessink <[email protected]> wrote:
Hi List,
I have a WG endpoint configured with
AllowedIPs = ::/0
... on an Android phone.To my surprise, I found out that this also tries to route IPv4 addresses to the other WG side.
I was able to change that with a single "bogus" IPv4 address, "AllowedIPs = ::/0, 192.0.2.99/32"
Is this a known feature? Android 13, WireGuard for Android v1.0.20230707, (from AOSP).
Best regards,
Valentijn
--
Sustainable and modern Infrastructures by ungleich.ch
Hi Marek,
Do you have any sources for that? AFAIK, ::/0 is a convenient way to describe "any IPv6 address".
Still, if you are correct and should ::/0 include IPv4, then the exact same setup under Linux operates differently, because here ::/0 only routes IPv6, not IPv4. Note the empty result for the ipv4 routing table:
# AllowedIPs = ::/0
v@lnx:~$ ip ro li ta 51820 v@lnx:~$ ip -6 ro li ta 51820 default dev wgip6 metric 1024 pref medium
# AllowedIPs = ::/0, 0.0.0.0/0
v@lnx:~$ ip ro li ta 51820 default dev wgip6 scope link v@lnx:~$ ip -6 ro li ta 51820 default dev wgip6 metric 1024 pref medium
So the question remains: ::/0 under Android routes all IPv4 traffic to the WG interface, while under Linux, it will only route IPv6. Is this known behaviour?
The wg-quick manpage is ambiguous, saying that "if one of those routes is the default route (0.0.0.0/0 or ::/0), then it uses ip-rule(8) to handle overriding of the default gateway." No information on routing IPv4 or IPv6 differently.
A rephrase could be something like "if one of those routes is 0.0.0.0/0, or ::/0, it uses ip-rule(8) to handle overriding the default route for IPv4 or IPv6 respectivally."
Best regards,
Valentijn
Quoted 1 line · Marek Küthe
::/0 does not describe no IPv4 address, but all IP addresses. So when
[...]
Quoted 3 lines
Quoted 1 line · On Tue, 5 Sep 2023 16:04:34 +0200 Valentijn Sessink <[email protected]> wrote:
AllowedIPs = ::/0
[...]
Quoted 4 lines
Quoted 4 lines
To my surprise, I found out that this also tries to route IPv4 addresses to the other WG side.
Is this a known feature? Android 13, WireGuard for Android v1.0.20230707, (from AOSP).--
http://www.openoffice.nl/ Open Office - Linux Office Solutions
Valentijn Sessink [email protected] +31(0)20-4214059