Skip to contentSkip to conversation

of: address: Store number of bus flag cells rather than bool

PATCH In review Rob Herring 2 participants 4 messages Oct 26, 2023 Device tree

lore
Share & tools
lore

Rob Herring

author maintainer
#0 lore raw

PATCH 1/2 of: address: Store number of bus flag cells rather than bool

It is more useful to know how many flags cells a bus has rather than whether a bus has flags or not as ultimately the number of cells is the information used. Replace 'has_flags' boolean with 'flag_cells' count.

---
This series applies on top of Herve's[1].

Rob

[1] https://lore.kernel.org/all/[email protected]/

 drivers/of/address.c | 14 +++++---------
 1 file changed, 5 insertions(+), 9 deletions(-)
drivers/of/address.c +5 -9
index d21a3b74ac56..997f431af165 100644
@@ -45,7 +45,7 @@ struct of_bus {
 	u64		(*map)(__be32 *addr, const __be32 *range,
 				int na, int ns, int pna);
 	int		(*translate)(__be32 *addr, u64 offset, int na);
-	bool	has_flags;
+	int		flag_cells;
 	unsigned int	(*get_flags)(const __be32 *addr);
 };
 
@@ -370,7 +370,7 @@ static struct of_bus of_busses[] = {
 		.count_cells = of_bus_pci_count_cells,
 		.map = of_bus_pci_map,
 		.translate = of_bus_default_flags_translate,
-		.has_flags = true,
+		.flag_cells = 1,
 		.get_flags = of_bus_pci_get_flags,
 	},
 #endif /* CONFIG_PCI */
@@ -382,7 +382,7 @@ static struct of_bus of_busses[] = {
 		.count_cells = of_bus_isa_count_cells,
 		.map = of_bus_isa_map,
 		.translate = of_bus_default_flags_translate,
-		.has_flags = true,
+		.flag_cells = 1,
 		.get_flags = of_bus_isa_get_flags,
 	},
 	/* Default with flags cell */
@@ -393,7 +393,7 @@ static struct of_bus of_busses[] = {
 		.count_cells = of_bus_default_count_cells,
 		.map = of_bus_default_flags_map,
 		.translate = of_bus_default_flags_translate,
-		.has_flags = true,
+		.flag_cells = 1,
 		.get_flags = of_bus_default_flags_get_flags,
 	},
 	/* Default */
@@ -826,7 +826,7 @@ struct of_pci_range *of_pci_range_parser_one(struct of_pci_range_parser *parser,
 	int na = parser->na;
 	int ns = parser->ns;
 	int np = parser->pna + na + ns;
-	int busflag_na = 0;
+	int busflag_na = parser->bus->flag_cells;
 
 	if (!range)
 		return NULL;
@@ -836,10 +836,6 @@ struct of_pci_range *of_pci_range_parser_one(struct of_pci_range_parser *parser,
 
 	range->flags = parser->bus->get_flags(parser->range);
 
-	/* A extra cell for resource flags */
-	if (parser->bus->has_flags)
-		busflag_na = 1;
-
 	range->bus_addr = of_read_number(parser->range + busflag_na, na - busflag_na);
 
 	if (parser->dma)
Signature · 1 line
2.42.0
author maintainer
#1 lore raw

PATCH 2/2 of: address: Consolidate bus .map() functions

The bus .map() functions vary only by checking the flag cells values and skipping over any flag cells to read the addresses. Otherwise they all do the same reading 'ranges' address and size and returning the address's offset if it is within the 'ranges' entry.

Refactor all the .map() functions to pass in the flag cell size so that each bus can check the bus specific flags and then call a common function to do everything else.

---
 drivers/of/address.c | 54 +++++++++-----------------------------------
 1 file changed, 11 insertions(+), 43 deletions(-)
drivers/of/address.c +11 -43
index 997f431af165..b59956310f66 100644
@@ -43,7 +43,7 @@ struct of_bus {
 	void		(*count_cells)(struct device_node *child,
 				       int *addrc, int *sizec);
 	u64		(*map)(__be32 *addr, const __be32 *range,
-				int na, int ns, int pna);
+				int na, int ns, int pna, int fna);
 	int		(*translate)(__be32 *addr, u64 offset, int na);
 	int		flag_cells;
 	unsigned int	(*get_flags)(const __be32 *addr);
@@ -63,13 +63,13 @@ static void of_bus_default_count_cells(struct device_node *dev,
 }
 
 static u64 of_bus_default_map(__be32 *addr, const __be32 *range,
-		int na, int ns, int pna)
+		int na, int ns, int pna, int fna)
 {
 	u64 cp, s, da;
 
-	cp = of_read_number(range, na);
+	cp = of_read_number(range + fna, na - fna);
 	s  = of_read_number(range + na + pna, ns);
-	da = of_read_number(addr, na);
+	da = of_read_number(addr + fna, na - fna);
 
 	pr_debug("default map, cp=%llx, s=%llx, da=%llx\n", cp, s, da);
 
@@ -101,24 +101,13 @@ static unsigned int of_bus_default_get_flags(const __be32 *addr)
 }
 
 static u64 of_bus_default_flags_map(__be32 *addr, const __be32 *range, int na,
-				    int ns, int pna)
+				    int ns, int pna, int fna)
 {
-	u64 cp, s, da;
-
 	/* Check that flags match */
 	if (*addr != *range)
 		return OF_BAD_ADDR;
 
-	/* Read address values, skipping high cell */
-	cp = of_read_number(range + 1, na - 1);
-	s  = of_read_number(range + na + pna, ns);
-	da = of_read_number(addr + 1, na - 1);
-
-	pr_debug("default flags map, cp=%llx, s=%llx, da=%llx\n", cp, s, da);
-
-	if (da < cp || da >= (cp + s))
-		return OF_BAD_ADDR;
-	return da - cp;
+	return of_bus_default_map(addr, range, na, ns, pna, fna);
 }
 
 static int of_bus_default_flags_translate(__be32 *addr, u64 offset, int na)
@@ -192,9 +181,8 @@ static void of_bus_pci_count_cells(struct device_node *np,
 }
 
 static u64 of_bus_pci_map(__be32 *addr, const __be32 *range, int na, int ns,
-		int pna)
+		int pna, int fna)
 {
-	u64 cp, s, da;
 	unsigned int af, rf;
 
 	af = of_bus_pci_get_flags(addr);
@@ -204,16 +192,7 @@ static u64 of_bus_pci_map(__be32 *addr, const __be32 *range, int na, int ns,
 	if ((af ^ rf) & (IORESOURCE_MEM | IORESOURCE_IO))
 		return OF_BAD_ADDR;
 
-	/* Read address values, skipping high cell */
-	cp = of_read_number(range + 1, na - 1);
-	s  = of_read_number(range + na + pna, ns);
-	da = of_read_number(addr + 1, na - 1);
-
-	pr_debug("PCI map, cp=%llx, s=%llx, da=%llx\n", cp, s, da);
-
-	if (da < cp || da >= (cp + s))
-		return OF_BAD_ADDR;
-	return da - cp;
+	return of_bus_default_map(addr, range, na, ns, pna, fna);
 }
 
 #endif /* CONFIG_PCI */
@@ -319,24 +298,13 @@ static void of_bus_isa_count_cells(struct device_node *child,
 }
 
 static u64 of_bus_isa_map(__be32 *addr, const __be32 *range, int na, int ns,
-		int pna)
+		int pna, int fna)
 {
-	u64 cp, s, da;
-
 	/* Check address type match */
 	if ((addr[0] ^ range[0]) & cpu_to_be32(1))
 		return OF_BAD_ADDR;
 
-	/* Read address values, skipping high cell */
-	cp = of_read_number(range + 1, na - 1);
-	s  = of_read_number(range + na + pna, ns);
-	da = of_read_number(addr + 1, na - 1);
-
-	pr_debug("ISA map, cp=%llx, s=%llx, da=%llx\n", cp, s, da);
-
-	if (da < cp || da >= (cp + s))
-		return OF_BAD_ADDR;
-	return da - cp;
+	return of_bus_default_map(addr, range, na, ns, pna, fna);
 }
 
 static unsigned int of_bus_isa_get_flags(const __be32 *addr)
@@ -486,7 +454,7 @@ static int of_translate_one(struct device_node *parent, struct of_bus *bus,
 	rlen /= 4;
 	rone = na + pna + ns;
 	for (; rlen >= rone; rlen -= rone, ranges += rone) {
-		offset = bus->map(addr, ranges, na, ns, pna);
+		offset = bus->map(addr, ranges, na, ns, pna, bus->flag_cells);
 		if (offset != OF_BAD_ADDR)
 			break;
 	}
Signature · 1 line
2.42.0
Acked-by on v1 2/2
#2 lore raw

Re: [PATCH 2/2] of: address: Consolidate bus .map() functions

Hi Rob,

Quoted 10 lines · On Thu, 26 Oct 2023 08:53:59 -0500 Rob Herring <[email protected]> wrote:

The bus .map() functions vary only by checking the flag cells values and skipping over any flag cells to read the addresses. Otherwise they all do the same reading 'ranges' address and size and returning the address's offset if it is within the 'ranges' entry.

Refactor all the .map() functions to pass in the flag cell size so that each bus can check the bus specific flags and then call a common function to do everything else.

Best regards,
Hervé

Acked-by on v1 1/2
#3 lore raw
In reply to Rob Herring
Quoted 7 lines · On Thu, 26 Oct 2023 08:53:58 -0500 Rob Herring <[email protected]> wrote:

It is more useful to know how many flags cells a bus has rather than whether a bus has flags or not as ultimately the number of cells is the information used. Replace 'has_flags' boolean with 'flag_cells' count.

---
This series applies on top of Herve's[1].

Best regards,
Hervé