sunxi, usb: Clean up SRAM initialization code
Subsystems (2)
v4 cover sunxi, usb: Clean up SRAM initialization code
Hi list,
Only change from v4 is that I reworded the commit message in 2/2 not to mention the TODO comment block that I removed in v3.
Cheers,
Sam
Sam Edwards (2):
usb: musb-new: sunxi: only perform SRAM initialization when necessary
usb: musb-new: sunxi: clarify the purpose of SRAM initialization
drivers/usb/musb-new/sunxi.c | 36 +++++++++++++++++++++++++++--------- 1 file changed, 27 insertions(+), 9 deletions(-)
Signature · 1 line
2.39.2
PATCH v4 1/2 usb: musb-new: sunxi: only perform SRAM initialization when necessary
Only the older (ca. A10, A20) sunxis need this poke for the MUSB to function. Mimic the Linux kernel and add a has_sram flag to the config structure that is only set for the specific compatibles that require this initialization.
--- drivers/usb/musb-new/sunxi.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/usb/musb-new/sunxi.c +6 -1
@@ -83,6 +83,7 @@struct sunxi_musb_config {struct musb_hdrc_config *config; +bool has_sram; };struct sunxi_glue {
@@ -311,7 +312,10 @@ static int sunxi_musb_init(struct musb *musb) musb->isr = sunxi_musb_interrupt; -USBC_ConfigFIFO_Base (); +if (glue->cfg->has_sram) { +USBC_ConfigFIFO_Base (); + } +USBC_EnableDpDmPullUp (musb->mregs);USBC_EnableIdPullUp (musb->mregs);
@@ -517,6 +521,7 @@ static int musb_usb_remove(struct udevice *dev)static const struct sunxi_musb_config sun4i_a10_cfg = { .config = &musb_config, + .has_sram = true, };static const struct sunxi_musb_config sun6i_a31_cfg = {
Signature · 1 line
2.39.2
PATCH v4 2/2 usb: musb-new: sunxi: clarify the purpose of SRAM initialization
In reply to Sam EdwardsThis is largely a cosmetic change, with one functional distinction:
We are now only setting BIT(0), and no longer clearing BIT(1).
The A20 manual confirms the purpose and bitwidth of this field, and we have also been doing it this way for a while in Linux-land: The prior narrative about this initialization being about configuring a FIFO has pretty much been debunked for years now.
--- drivers/usb/musb-new/sunxi.c | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-)
drivers/usb/musb-new/sunxi.c +22 -9
@@ -171,15 +171,22 @@ static void USBC_ForceVbusValidToHigh(__iomem void *base)musb_writel (base, USBC_REG_o_ISCR, reg_val); } -static void USBC_ConfigFIFO_Base (void ) -{ -u32 reg_value; +/****************************************************************************** +* Non-USBC register access needed for initialization +******************************************************************************/ -/* config usb fifo, 8kb mode */ - reg_value =readl (SUNXI_SRAMC_BASE +0x04 ); - reg_value &= ~(0x03 <<0 ); - reg_value |=BIT (0 ); -writel (reg_value,SUNXI_SRAMC_BASE +0x04 ); +/* +* A10(s), A13, GR8, A20: +* switch ownership of SRAM block 'D' to the USB-OTG controller +*/ +static void sunxi_musb_claim_sram (uintptr_t syscon_base) +{ +/* +* BIT(0) of SRAM_CTRL_REG1 (syscon+0x04) controls SRAM-D ownership: +* '0' -> exclusive access by CPU +* '1' -> exclusive access by USB0 +*/ +setbits_le32 (syscon_base +0x04 ,BIT (0 )); }/******************************************************************************
@@ -313,7 +320,13 @@ static int sunxi_musb_init(struct musb *musb) musb->isr = sunxi_musb_interrupt;if (glue->cfg->has_sram) { -USBC_ConfigFIFO_Base (); +/* +* This is an older USB-OTG controller that Allwinner did not +* endow with a dedicated SRAM block; it instead uses SRAM +* block 'D', ownership of which needs to be handed over by +* the CPU +*/ +sunxi_musb_claim_sram (SUNXI_SRAMC_BASE ); }USBC_EnableDpDmPullUp (musb->mregs);
Signature · 1 line
2.39.2
On Thu, 15 Jun 2023 13:06:59 -0600
Sam Edwards <[email protected]> wrote:
Hi Marek,
I just saw that you were not CC:ed on this one. Both patches are fine from my point of view.
Do you want to take them through the USB tree, or shall I do it via the sunxi tree?
And shall I take future musb-new/sunxi.c patches in general, if you have approved them? They are typically ports of quirks from the kernel, and new compatible strings, maybe.
Cheers,
Andre
Quoted 13 lines
Only change from v4 is that I reworded the commit message in 2/2 not to mention the TODO comment block that I removed in v3.
Cheers,
SamSam Edwards (2):
usb: musb-new: sunxi: only perform SRAM initialization when necessary
usb: musb-new: sunxi: clarify the purpose of SRAM initializationdrivers/usb/musb-new/sunxi.c | 36 +++++++++++++++++++++++++++--------- 1 file changed, 27 insertions(+), 9 deletions(-)