configs/raspberrypi: bump Linux version to 6.1.61

PATCH Applied Bram Oosterhuis 4 participants 8 messages Nov 4, 2023 – Dec 4, 2023 Broadcom BCM2711/BCM2835 Arm architecture

lore

Share & tools

lore

Bram Oosterhuis

author

2023-11-04 22:02 UTC #0 lore raw

PATCH 1/2 configs/raspberrypi: bump Linux version to 6.1.61

Linux 6.1 has been marked LTS for a long time now. Time to bump Linux for RaspberryPi's to the latest 6.1.61 Since April 2022 the RaspberryPi defconfigs have compressed kernel module enabled by default. (see [1] and [2]).

To load compressed kernel modules kmod and xz packages are needed because busybox doesn't support it.

For testing I used RaspberryPi 2, 3(32+64bit) and 4(32+64bit), all with mdev enabled.

[1] https://github.com/raspberrypi/linux/commit/c45b4223a4e4a8cfe39edbb4949329ea478fa4e2
[2] https://github.com/raspberrypi/linux/issues/4966

Signed-off-by Bram Oosterhuis <[email protected]>

---
 configs/raspberrypi0_defconfig        | 13 ++++++++++---
 configs/raspberrypi0w_defconfig       | 13 ++++++++++---
 configs/raspberrypi2_defconfig        | 13 ++++++++++---
 configs/raspberrypi3_64_defconfig     | 13 ++++++++++---
 configs/raspberrypi3_defconfig        | 13 ++++++++++---
 configs/raspberrypi3_qt5we_defconfig  | 13 ++++++++++---
 configs/raspberrypi4_64_defconfig     | 13 ++++++++++---
 configs/raspberrypi4_defconfig        | 13 ++++++++++---
 configs/raspberrypi_defconfig         | 13 ++++++++++---
 configs/raspberrypicm4io_64_defconfig | 13 ++++++++++---
 configs/raspberrypicm4io_defconfig    | 13 ++++++++++---
 configs/raspberrypizero2w_defconfig   | 13 ++++++++++---
 12 files changed, 120 insertions(+), 36 deletions(-)

configs/raspberrypi0_defconfig +10 -3

index 4506e94bce..6bff1ebf81 100644
@@ -2,14 +2,14 @@ BR2_arm=y
 BR2_arm1176jzf_s=y
 BR2_ARM_EABIHF=y
 
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
 
 BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
 
 # Build the DTBs for A/B from the kernel sources: the zero is the same

@@ -37,3 +37,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi0/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi0/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

configs/raspberrypi0w_defconfig +10 -3

index 7a35794c2d..ac72d49f92 100644
@@ -2,14 +2,14 @@ BR2_arm=y
 BR2_arm1176jzf_s=y
 BR2_ARM_EABIHF=y
 
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
 
 BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2708-rpi-zero-w"

@@ -32,3 +32,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi0w/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi0w/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

configs/raspberrypi2_defconfig +10 -3

index 9b484c5588..dee9a0b23f 100644
@@ -7,12 +7,12 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
 BR2_SYSTEM_DHCP="eth0"
 
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
 
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
 
 # Build the DTB from the kernel sources

@@ -39,3 +39,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi2/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi2/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

configs/raspberrypi3_64_defconfig +10 -3

index 4d838ae0e8..6871dc0fe0 100644
@@ -6,12 +6,12 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
 BR2_SYSTEM_DHCP="eth0"
 
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
 
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi3"
 
 # Build the DTB from the kernel sources

@@ -37,3 +37,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi3-64/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi3-64/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

configs/raspberrypi3_defconfig +10 -3

index 0a59ab42a9..f0e7b82191 100644
@@ -6,12 +6,12 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
 BR2_SYSTEM_DHCP="eth0"
 
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
 
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
 
 # Build the DTB from the kernel sources

@@ -37,3 +37,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi3/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi3/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

configs/raspberrypi3_qt5we_defconfig +10 -3

index 40d0c0f888..532b3ed686 100644
@@ -7,12 +7,12 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
 BR2_SYSTEM_DHCP="eth0"
 
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
 
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
 
 # Build the DTB from the kernel sources

@@ -51,3 +51,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="400M"
 BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi3/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi3/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

configs/raspberrypi4_64_defconfig +10 -3

index 5942f7c4e1..453bbe9440 100644
@@ -6,12 +6,12 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
 BR2_SYSTEM_DHCP="eth0"
 
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
 
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2711"
 
 # Build the DTB from the kernel sources

@@ -36,3 +36,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi4-64/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi4-64/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

configs/raspberrypi4_defconfig +10 -3

index 4e5580c140..1ed5d34b56 100644
@@ -6,12 +6,12 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
 BR2_SYSTEM_DHCP="eth0"
 
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
 
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2711"
 
 # Build the DTB from the kernel sources

@@ -36,3 +36,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi4/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi4/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

configs/raspberrypi_defconfig +10 -3

index cca53f9b37..01b4353b84 100644
@@ -4,14 +4,14 @@ BR2_ARM_EABIHF=y
 
 BR2_SYSTEM_DHCP="eth0"
 
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
 
 BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
 
 # Build the DTBs for A/B, A+/B+ and compute module from the kernel sources

@@ -38,3 +38,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

configs/raspberrypicm4io_64_defconfig +10 -3

index 29cb0472d7..d53711c3a7 100644
@@ -6,12 +6,12 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
 BR2_SYSTEM_DHCP="eth0"
 
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
 
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2711"
 
 # Build the DTB from the kernel sources

@@ -39,3 +39,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypicm4io-64/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypicm4io-64/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

configs/raspberrypicm4io_defconfig +10 -3

index 017aecc0dd..4b50dc9ef9 100644
@@ -6,12 +6,12 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
 BR2_SYSTEM_DHCP="eth0"
 
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
 
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2711"
 
 # Build the DTB from the kernel sources

@@ -39,3 +39,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypicm4io/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypicm4io/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

configs/raspberrypizero2w_defconfig +10 -3

index 2ea503ca24..1bf335c076 100644
@@ -2,14 +2,14 @@ BR2_arm=y
 BR2_cortex_a53=y
 BR2_ARM_FPU_NEON_VFPV4=y
 
-# Linux headers same as kernel, 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6.1=y
 
 BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
 
 # Build the DTB from the kernel sources

@@ -34,3 +34,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypizero2w/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypizero2w/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

Signature · 6 lines

2.34.1

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

Bram Oosterhuis

author

2023-11-04 22:02 UTC #1 lore raw

PATCH 2/2 package/rpi-firmware: bump version to 83dafbc

Version 83dafbc will match the with kernel 6.1.61

Signed-off-by Bram Oosterhuis <[email protected]>

---
 package/rpi-firmware/rpi-firmware.hash | 2 +-
 package/rpi-firmware/rpi-firmware.mk   | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

package/rpi-firmware/rpi-firmware.hash +1 -1

index ec13115f3b..33e05a2f4a 100644
@@ -1,3 +1,3 @@
 # Locally computed
-sha256  33aea2cb9c3be94c3dd6a96fbb3443eee5af1dc5fc9140e1fadc50832983064e  rpi-firmware-3f20b832b27cd730deb6419b570f31a98167eef6.tar.gz
+sha256  dd43e77ca1a8969cdb7f05dd72a57f90862071d5a93bdd6aea8246aba85689cf  rpi-firmware-83dafbc92c0e63f76ca2ecdd42462d56489d1c77.tar.gz
 sha256  c7283ff51f863d93a275c66e3b4cb08021a5dd4d8c1e7acc47d872fbe52d3d6b  boot/LICENCE.broadcom

package/rpi-firmware/rpi-firmware.mk +1 -1

index 53d6d8ca06..37e010d1de 100644
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-RPI_FIRMWARE_VERSION = 3f20b832b27cd730deb6419b570f31a98167eef6
+RPI_FIRMWARE_VERSION = 83dafbc92c0e63f76ca2ecdd42462d56489d1c77
 RPI_FIRMWARE_SITE = $(call github,raspberrypi,firmware,$(RPI_FIRMWARE_VERSION))
 RPI_FIRMWARE_LICENSE = BSD-3-Clause
 RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom

Signature · 6 lines

2.34.1

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

Marcus Hoffmann via buildroot

Reviewed-by Marcus Hoffmann Tested-by Marcus Hoffmann on v1 2/2

2023-11-08 11:01 UTC #2 lore raw

Re: [Buildroot] [PATCH 2/2] package/rpi-firmware: bump version to 83dafbc

Quoted 3 lines · Bram Oosterhuis

Version 83dafbc will match the with kernel 6.1.61
Signed-off-by Bram Oosterhuis <[email protected]>

Reviewed-by Marcus Hoffmann <[email protected]>

Tested-by Marcus Hoffmann <[email protected]>

Quoted 19 lines

---
  package/rpi-firmware/rpi-firmware.hash | 2 +-
  package/rpi-firmware/rpi-firmware.mk   | 2 +-
  2 files changed, 2 insertions(+), 2 deletions(-)

package/rpi-firmware/rpi-firmware.hash +1 -1

index ec13115f3b..33e05a2f4a 100644
@@ -1,3 +1,3 @@
  # Locally computed
-sha256  33aea2cb9c3be94c3dd6a96fbb3443eee5af1dc5fc9140e1fadc50832983064e  rpi-firmware-3f20b832b27cd730deb6419b570f31a98167eef6.tar.gz
+sha256  dd43e77ca1a8969cdb7f05dd72a57f90862071d5a93bdd6aea8246aba85689cf  rpi-firmware-83dafbc92c0e63f76ca2ecdd42462d56489d1c77.tar.gz
  sha256  c7283ff51f863d93a275c66e3b4cb08021a5dd4d8c1e7acc47d872fbe52d3d6b  boot/LICENCE.broadcom

package/rpi-firmware/rpi-firmware.mk +0 -0

index 53d6d8ca06..37e010d1de 100644

package/rpi-firmware/rpi-firmware.mk line 10

Quoted 8 lines

package/rpi-firmware/rpi-firmware.mk +1 -1

@@ -4,7 +4,7 @@
  #
  ################################################################################
 
-RPI_FIRMWARE_VERSION = 3f20b832b27cd730deb6419b570f31a98167eef6
+RPI_FIRMWARE_VERSION = 83dafbc92c0e63f76ca2ecdd42462d56489d1c77
  RPI_FIRMWARE_SITE = $(call github,raspberrypi,firmware,$(RPI_FIRMWARE_VERSION))
  RPI_FIRMWARE_LICENSE = BSD-3-Clause
  RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom

________________________________

othermo GmbH | Sitz der Gesellschaft: Alzenau | Amtsgericht Aschaffenburg: HRB 14783 | USt-IdNr.: DE319977978 | Geschäftsführung: Dr. Dennis Metz.
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

Yann E. MORIN

Applied

2023-12-01 10:04 UTC #3 lore raw

Re: [Buildroot] [PATCH 2/2] package/rpi-firmware: bump version to 83dafbc

In reply to Bram Oosterhuis

Bram, All,

On 2023-11-04 23:01 +0100, Bram Oosterhuis spake thusly:

Quoted 3 lines

Version 83dafbc will match the with kernel 6.1.61
Signed-off-by Bram Oosterhuis <[email protected]>

Applied to next, thanks.

Regards,
Yann E. MORIN.

Quoted 34 lines

---
 package/rpi-firmware/rpi-firmware.hash | 2 +-
 package/rpi-firmware/rpi-firmware.mk   | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

package/rpi-firmware/rpi-firmware.hash +1 -1

index ec13115f3b..33e05a2f4a 100644
@@ -1,3 +1,3 @@
 # Locally computed
-sha256  33aea2cb9c3be94c3dd6a96fbb3443eee5af1dc5fc9140e1fadc50832983064e  rpi-firmware-3f20b832b27cd730deb6419b570f31a98167eef6.tar.gz
+sha256  dd43e77ca1a8969cdb7f05dd72a57f90862071d5a93bdd6aea8246aba85689cf  rpi-firmware-83dafbc92c0e63f76ca2ecdd42462d56489d1c77.tar.gz
 sha256  c7283ff51f863d93a275c66e3b4cb08021a5dd4d8c1e7acc47d872fbe52d3d6b  boot/LICENCE.broadcom

package/rpi-firmware/rpi-firmware.mk +1 -1

index 53d6d8ca06..37e010d1de 100644
@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-RPI_FIRMWARE_VERSION = 3f20b832b27cd730deb6419b570f31a98167eef6
+RPI_FIRMWARE_VERSION = 83dafbc92c0e63f76ca2ecdd42462d56489d1c77
 RPI_FIRMWARE_SITE = $(call github,raspberrypi,firmware,$(RPI_FIRMWARE_VERSION))
 RPI_FIRMWARE_LICENSE = BSD-3-Clause
 RPI_FIRMWARE_LICENSE_FILES = boot/LICENCE.broadcom

Signature · 6 lines

2.34.1

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

Signature · 10 lines

.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

Marcus Hoffmann via buildroot

Reviewed-by Marcus Hoffmann Tested-by Marcus Hoffmann on v1 1/2

2023-11-08 11:00 UTC #4 lore raw

In reply to Bram Oosterhuis

I've just build and runtime tested this for a CM4. Thanks for doing the bump!

Quoted 8 lines · Bram Oosterhuis

Linux 6.1 has been marked LTS for a long time now. Time to bump Linux for RaspberryPi's to the latest 6.1.61 Since April 2022 the RaspberryPi defconfigs have compressed kernel module enabled by default. (see [1] and [2]).
To load compressed kernel modules kmod and xz packages are needed because busybox doesn't support it.

Quoted 6 lines

For testing I used RaspberryPi 2, 3(32+64bit) and 4(32+64bit), all with mdev enabled.
[1] https://github.com/raspberrypi/linux/commit/c45b4223a4e4a8cfe39edbb4949329ea478fa4e2
[2] https://github.com/raspberrypi/linux/issues/4966
Signed-off-by Bram Oosterhuis <[email protected]>

Reviewed-by Marcus Hoffmann <[email protected]>

Tested-by Marcus Hoffmann <[email protected]>

Quoted 385 lines

---
  configs/raspberrypi0_defconfig        | 13 ++++++++++---
  configs/raspberrypi0w_defconfig       | 13 ++++++++++---
  configs/raspberrypi2_defconfig        | 13 ++++++++++---
  configs/raspberrypi3_64_defconfig     | 13 ++++++++++---
  configs/raspberrypi3_defconfig        | 13 ++++++++++---
  configs/raspberrypi3_qt5we_defconfig  | 13 ++++++++++---
  configs/raspberrypi4_64_defconfig     | 13 ++++++++++---
  configs/raspberrypi4_defconfig        | 13 ++++++++++---
  configs/raspberrypi_defconfig         | 13 ++++++++++---
  configs/raspberrypicm4io_64_defconfig | 13 ++++++++++---
  configs/raspberrypicm4io_defconfig    | 13 ++++++++++---
  configs/raspberrypizero2w_defconfig   | 13 ++++++++++---
  12 files changed, 120 insertions(+), 36 deletions(-)

configs/raspberrypi0_defconfig +10 -3

index 4506e94bce..6bff1ebf81 100644
@@ -2,14 +2,14 @@ BR2_arm=y
  BR2_arm1176jzf_s=y
  BR2_ARM_EABIHF=y
 
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
 
  BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
  BR2_LINUX_KERNEL=y
  BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
  BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
 
  # Build the DTBs for A/B from the kernel sources: the zero is the same

@@ -37,3 +37,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
  # BR2_TARGET_ROOTFS_TAR is not set
  BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi0/post-build.sh"
  BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi0/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

configs/raspberrypi0w_defconfig +10 -3

index 7a35794c2d..ac72d49f92 100644
@@ -2,14 +2,14 @@ BR2_arm=y
  BR2_arm1176jzf_s=y
  BR2_ARM_EABIHF=y
 
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
 
  BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
  BR2_LINUX_KERNEL=y
  BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
  BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
  BR2_LINUX_KERNEL_DTS_SUPPORT=y
  BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2708-rpi-zero-w"

@@ -32,3 +32,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
  # BR2_TARGET_ROOTFS_TAR is not set
  BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi0w/post-build.sh"
  BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi0w/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

configs/raspberrypi2_defconfig +10 -3

index 9b484c5588..dee9a0b23f 100644
@@ -7,12 +7,12 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
  BR2_SYSTEM_DHCP="eth0"
 
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
 
  BR2_LINUX_KERNEL=y
  BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
  BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
 
  # Build the DTB from the kernel sources

@@ -39,3 +39,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
  # BR2_TARGET_ROOTFS_TAR is not set
  BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi2/post-build.sh"
  BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi2/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

configs/raspberrypi3_64_defconfig +10 -3

index 4d838ae0e8..6871dc0fe0 100644
@@ -6,12 +6,12 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
  BR2_SYSTEM_DHCP="eth0"
 
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
 
  BR2_LINUX_KERNEL=y
  BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
  BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi3"
 
  # Build the DTB from the kernel sources

@@ -37,3 +37,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
  # BR2_TARGET_ROOTFS_TAR is not set
  BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi3-64/post-build.sh"
  BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi3-64/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

configs/raspberrypi3_defconfig +10 -3

index 0a59ab42a9..f0e7b82191 100644
@@ -6,12 +6,12 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
  BR2_SYSTEM_DHCP="eth0"
 
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
 
  BR2_LINUX_KERNEL=y
  BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
  BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
 
  # Build the DTB from the kernel sources

@@ -37,3 +37,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
  # BR2_TARGET_ROOTFS_TAR is not set
  BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi3/post-build.sh"
  BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi3/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

configs/raspberrypi3_qt5we_defconfig +10 -3

index 40d0c0f888..532b3ed686 100644
@@ -7,12 +7,12 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
  BR2_SYSTEM_DHCP="eth0"
 
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
 
  BR2_LINUX_KERNEL=y
  BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
  BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
 
  # Build the DTB from the kernel sources

@@ -51,3 +51,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="400M"
  BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
  BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi3/post-build.sh"
  BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi3/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

configs/raspberrypi4_64_defconfig +10 -3

index 5942f7c4e1..453bbe9440 100644
@@ -6,12 +6,12 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
  BR2_SYSTEM_DHCP="eth0"
 
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
 
  BR2_LINUX_KERNEL=y
  BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
  BR2_LINUX_KERNEL_DEFCONFIG="bcm2711"
 
  # Build the DTB from the kernel sources

@@ -36,3 +36,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
  # BR2_TARGET_ROOTFS_TAR is not set
  BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi4-64/post-build.sh"
  BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi4-64/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

configs/raspberrypi4_defconfig +10 -3

index 4e5580c140..1ed5d34b56 100644
@@ -6,12 +6,12 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
  BR2_SYSTEM_DHCP="eth0"
 
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
 
  BR2_LINUX_KERNEL=y
  BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
  BR2_LINUX_KERNEL_DEFCONFIG="bcm2711"
 
  # Build the DTB from the kernel sources

@@ -36,3 +36,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
  # BR2_TARGET_ROOTFS_TAR is not set
  BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi4/post-build.sh"
  BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi4/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

configs/raspberrypi_defconfig +10 -3

index cca53f9b37..01b4353b84 100644
@@ -4,14 +4,14 @@ BR2_ARM_EABIHF=y
 
  BR2_SYSTEM_DHCP="eth0"
 
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
 
  BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
  BR2_LINUX_KERNEL=y
  BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
  BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
 
  # Build the DTBs for A/B, A+/B+ and compute module from the kernel sources

@@ -38,3 +38,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
  # BR2_TARGET_ROOTFS_TAR is not set
  BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi/post-build.sh"
  BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

configs/raspberrypicm4io_64_defconfig +10 -3

index 29cb0472d7..d53711c3a7 100644
@@ -6,12 +6,12 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
  BR2_SYSTEM_DHCP="eth0"
 
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
 
  BR2_LINUX_KERNEL=y
  BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
  BR2_LINUX_KERNEL_DEFCONFIG="bcm2711"
 
  # Build the DTB from the kernel sources

@@ -39,3 +39,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
  # BR2_TARGET_ROOTFS_TAR is not set
  BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypicm4io-64/post-build.sh"
  BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypicm4io-64/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

configs/raspberrypicm4io_defconfig +10 -3

index 017aecc0dd..4b50dc9ef9 100644
@@ -6,12 +6,12 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
  BR2_SYSTEM_DHCP="eth0"
 
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
 
  BR2_LINUX_KERNEL=y
  BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
  BR2_LINUX_KERNEL_DEFCONFIG="bcm2711"
 
  # Build the DTB from the kernel sources

@@ -39,3 +39,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
  # BR2_TARGET_ROOTFS_TAR is not set
  BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypicm4io/post-build.sh"
  BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypicm4io/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

configs/raspberrypizero2w_defconfig +3 -3

index 2ea503ca24..1bf335c076 100644
@@ -2,14 +2,14 @@ BR2_arm=y
  BR2_cortex_a53=y
  BR2_ARM_FPU_NEON_VFPV4=y
 
-# Linux headers same as kernel, 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6.1=y
 
  BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
  BR2_LINUX_KERNEL=y
  BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
  BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
 
  # Build the DTB from the kernel sources

configs/raspberrypizero2w_defconfig BR2_TARGET_ROOTFS_EXT2_SIZE="120M" · line 43

Quoted 10 lines

configs/raspberrypizero2w_defconfig +7 -0

@@ -34,3 +34,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
  # BR2_TARGET_ROOTFS_TAR is not set
  BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypizero2w/post-build.sh"
  BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypizero2w/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

________________________________

Yann E. MORIN

Applied

2023-12-01 10:04 UTC #5 lore raw

In reply to Bram Oosterhuis

Bram, All,

On 2023-11-04 23:01 +0100, Bram Oosterhuis spake thusly:

Quoted 8 lines

Linux 6.1 has been marked LTS for a long time now. Time to bump Linux for RaspberryPi's to the latest 6.1.61 Since April 2022 the RaspberryPi defconfigs have compressed kernel module enabled by default. (see [1] and [2]).
To load compressed kernel modules kmod and xz packages are needed because busybox doesn't support it.

Quoted 6 lines

For testing I used RaspberryPi 2, 3(32+64bit) and 4(32+64bit), all with mdev enabled.
[1] https://github.com/raspberrypi/linux/commit/c45b4223a4e4a8cfe39edbb4949329ea478fa4e2
[2] https://github.com/raspberrypi/linux/issues/4966
Signed-off-by Bram Oosterhuis <[email protected]>

Applied to next, thanks.

Regards,
Yann E. MORIN.

Quoted 402 lines

---
 configs/raspberrypi0_defconfig        | 13 ++++++++++---
 configs/raspberrypi0w_defconfig       | 13 ++++++++++---
 configs/raspberrypi2_defconfig        | 13 ++++++++++---
 configs/raspberrypi3_64_defconfig     | 13 ++++++++++---
 configs/raspberrypi3_defconfig        | 13 ++++++++++---
 configs/raspberrypi3_qt5we_defconfig  | 13 ++++++++++---
 configs/raspberrypi4_64_defconfig     | 13 ++++++++++---
 configs/raspberrypi4_defconfig        | 13 ++++++++++---
 configs/raspberrypi_defconfig         | 13 ++++++++++---
 configs/raspberrypicm4io_64_defconfig | 13 ++++++++++---
 configs/raspberrypicm4io_defconfig    | 13 ++++++++++---
 configs/raspberrypizero2w_defconfig   | 13 ++++++++++---
 12 files changed, 120 insertions(+), 36 deletions(-)

configs/raspberrypi0_defconfig +10 -3

index 4506e94bce..6bff1ebf81 100644
@@ -2,14 +2,14 @@ BR2_arm=y
 BR2_arm1176jzf_s=y
 BR2_ARM_EABIHF=y
 
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
 
 BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
 
 # Build the DTBs for A/B from the kernel sources: the zero is the same

@@ -37,3 +37,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi0/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi0/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

configs/raspberrypi0w_defconfig +10 -3

index 7a35794c2d..ac72d49f92 100644
@@ -2,14 +2,14 @@ BR2_arm=y
 BR2_arm1176jzf_s=y
 BR2_ARM_EABIHF=y
 
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
 
 BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2708-rpi-zero-w"

@@ -32,3 +32,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi0w/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi0w/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

configs/raspberrypi2_defconfig +10 -3

index 9b484c5588..dee9a0b23f 100644
@@ -7,12 +7,12 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
 BR2_SYSTEM_DHCP="eth0"
 
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
 
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
 
 # Build the DTB from the kernel sources

@@ -39,3 +39,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi2/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi2/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

configs/raspberrypi3_64_defconfig +10 -3

index 4d838ae0e8..6871dc0fe0 100644
@@ -6,12 +6,12 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
 BR2_SYSTEM_DHCP="eth0"
 
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
 
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi3"
 
 # Build the DTB from the kernel sources

@@ -37,3 +37,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi3-64/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi3-64/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

configs/raspberrypi3_defconfig +10 -3

index 0a59ab42a9..f0e7b82191 100644
@@ -6,12 +6,12 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
 BR2_SYSTEM_DHCP="eth0"
 
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
 
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
 
 # Build the DTB from the kernel sources

@@ -37,3 +37,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi3/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi3/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

configs/raspberrypi3_qt5we_defconfig +10 -3

index 40d0c0f888..532b3ed686 100644
@@ -7,12 +7,12 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
 BR2_SYSTEM_DHCP="eth0"
 
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
 
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
 
 # Build the DTB from the kernel sources

@@ -51,3 +51,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="400M"
 BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi3/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi3/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

configs/raspberrypi4_64_defconfig +10 -3

index 5942f7c4e1..453bbe9440 100644
@@ -6,12 +6,12 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
 BR2_SYSTEM_DHCP="eth0"
 
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
 
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2711"
 
 # Build the DTB from the kernel sources

@@ -36,3 +36,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi4-64/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi4-64/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

configs/raspberrypi4_defconfig +10 -3

index 4e5580c140..1ed5d34b56 100644
@@ -6,12 +6,12 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
 BR2_SYSTEM_DHCP="eth0"
 
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
 
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2711"
 
 # Build the DTB from the kernel sources

@@ -36,3 +36,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi4/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi4/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

configs/raspberrypi_defconfig +10 -3

index cca53f9b37..01b4353b84 100644
@@ -4,14 +4,14 @@ BR2_ARM_EABIHF=y
 
 BR2_SYSTEM_DHCP="eth0"
 
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
 
 BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcmrpi"
 
 # Build the DTBs for A/B, A+/B+ and compute module from the kernel sources

@@ -38,3 +38,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

configs/raspberrypicm4io_64_defconfig +10 -3

index 29cb0472d7..d53711c3a7 100644
@@ -6,12 +6,12 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
 BR2_SYSTEM_DHCP="eth0"
 
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
 
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2711"
 
 # Build the DTB from the kernel sources

@@ -39,3 +39,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypicm4io-64/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypicm4io-64/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

configs/raspberrypicm4io_defconfig +10 -3

index 017aecc0dd..4b50dc9ef9 100644
@@ -6,12 +6,12 @@ BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
 BR2_SYSTEM_DHCP="eth0"
 
-# Linux headers same as kernel, a 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, a 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
 
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2711"
 
 # Build the DTB from the kernel sources

@@ -39,3 +39,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypicm4io/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypicm4io/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

configs/raspberrypizero2w_defconfig +10 -3

index 2ea503ca24..1bf335c076 100644
@@ -2,14 +2,14 @@ BR2_arm=y
 BR2_cortex_a53=y
 BR2_ARM_FPU_NEON_VFPV4=y
 
-# Linux headers same as kernel, 5.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_10=y
+# Linux headers same as kernel, 6.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6.1=y
 
 BR2_TOOLCHAIN_BUILDROOT_CXX=y
 
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,0b54dbda3cca2beb51e236a25738784e90853b64)/linux-0b54dbda3cca2beb51e236a25738784e90853b64.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
 BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
 
 # Build the DTB from the kernel sources

@@ -34,3 +34,10 @@ BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
 # BR2_TARGET_ROOTFS_TAR is not set
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypizero2w/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypizero2w/post-image.sh"
+
+# Enable compressed kernel module support
+BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
+BR2_PACKAGE_KMOD_TOOLS=y
+BR2_PACKAGE_XZ=y
+BR2_PACKAGE_KMOD=y
+BR2_PACKAGE_HOST_KMOD_XZ=y

Signature · 6 lines

2.34.1

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

Signature · 10 lines

.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

Peter Korsgaard

2023-12-01 20:16 UTC #6 lore raw

Quoted 12 lines

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Yann" == Yann E MORIN <[email protected]> writes:
Bram, All,
On 2023-11-04 23:01 +0100, Bram Oosterhuis spake thusly:
Quoted 8 lines
Linux 6.1 has been marked LTS for a long time now. Time to bump Linux for RaspberryPi's to the latest 6.1.61 Since April 2022 the RaspberryPi defconfigs have compressed kernel module enabled by default. (see [1] and [2]).
To load compressed kernel modules kmod and xz packages are needed because busybox doesn't support it.

Quoted 8 lines

Quoted 6 lines
For testing I used RaspberryPi 2, 3(32+64bit) and 4(32+64bit), all with mdev enabled.
[1] https://github.com/raspberrypi/linux/commit/c45b4223a4e4a8cfe39edbb4949329ea478fa4e2
[2] https://github.com/raspberrypi/linux/issues/4966
Signed-off-by Bram Oosterhuis <[email protected]>
Applied to next, thanks.

Sorry for the slow response, the xz compressed modules seems a bit of a random choice by the rpi people. I wonder if it wouldn't make more sense to use a kernel config fragment to just disable that rather than enforcing kmod?

Or do they enable so many modules that they really take up a huge space (and not fitting in our default rootfs size)?

Signature · 5 lines

Bye, Peter Korsgaard
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot

Bram Oosterhuis

author

2023-12-04 12:09 UTC #7 lore raw

Hi Peter,

Reading the PR (https://github.com/raspberrypi/linux/issues/4966) The RPI team did measurements it reduces flash space while not really impacting boot time. Based on the comments I think it technically a good solution, but the config in buildroot gets a bit more complex. The kernel modules will not exceed the default rootfs size.
Going for kmod or for a kernel fragment is I think a personal choice. I worked with both solutions and both work fine. Also I checked the Yocto/OE RPI BSP and there the default intree kernel defconfig is build, also with compressed kernel modules. In the end I decided that following the RPI team/community would make sense.
If you or someone else has a technical argument choosing to switch compressed kernel modules off, I'm fine to change the configs accordingly.

Cheers,
Bram

"Peter Korsgaard" [email protected] – 1 december 2023 21:15

Quoted 20 lines

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Yann" == Yann E MORIN <[email protected]> writes:
Quoted 16 lines
Bram, All,
On 2023-11-04 23:01 +0100, Bram Oosterhuis spake thusly:
Quoted 14 lines
Linux 6.1 has been marked LTS for a long time now. Time to bump
Linux for RaspberryPi's to the latest 6.1.61 Since April 2022
the RaspberryPi defconfigs have compressed kernel module enabled
by default. (see [1] and [2]).

To load compressed kernel modules kmod and xz packages are needed
because busybox doesn't support it.

For testing I used RaspberryPi 2, 3(32+64bit) and 4(32+64bit), all with mdev enabled.
[1] https://github.com/raspberrypi/linux/commit/c45b4223a4e4a8cfe39edbb4949329ea478fa4e2
[2] https://github.com/raspberrypi/linux/issues/4966
Signed-off-by Bram Oosterhuis <[email protected]>
Quoted 1 line
Applied to next, thanks.

Quoted 10 lines

Sorry for the slow response, the xz compressed modules seems a bit of a random choice by the rpi people. I wonder if it wouldn't make more sense to use a kernel config fragment to just disable that rather than enforcing kmod?

Or do they enable so many modules that they really take up a huge space (and not fitting in our default rootfs size)?

_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot