Break up remaining changes to make xe compile.
cover Break up remaining changes to make xe compile.
New version, splitting it up into smaller changes. Hopefully this version flows better. The set_deadline changes have been dropped for now, but it should work as intended.
First patch should go into i915 and is on the ML, after that some fixups and reverts. After that we update headers, add a FIXME, and then split out fbdev, intel_fb and i915_gem_object_get_dma_address.
Maarten Lankhorst (9):
drm/i915: Use drm_atomic_helper_wait_for_fences helper. fixup! drm/xe/display: Implement display support drm/i915/display: Revert all before remaining changes to make xe
compile
drm/i915/display: Revert remaining changes to make xe compile drm/xe: Update headers to be more compatible with i915 FIXME drm/i915/display: add_dma_resv_fences is i915 only drm/i915/display: Use i915_gem_object_get_dma_address to get dma
address
FIXME drm/i915/display: Minimal changes to fbdev to make xe work FIXME drm/i915/display: Make intel_fb.c code compatible with xe
.../gpu/drm/i915/display/intel_atomic_plane.c | 13 +-- drivers/gpu/drm/i915/display/intel_cursor.c | 12 +-- drivers/gpu/drm/i915/display/intel_display.c | 58 +--------- .../drm/i915/display/intel_display_types.h | 4 - drivers/gpu/drm/i915/display/intel_fb.c | 89 ++++++---------- drivers/gpu/drm/i915/display/intel_fbc.c | 13 ++- drivers/gpu/drm/i915/display/intel_fbdev.c | 100 ++++++------------ .../gpu/drm/i915/display/intel_frontbuffer.c | 7 +- .../gpu/drm/i915/display/intel_frontbuffer.h | 4 - .../drm/i915/display/skl_universal_plane.c | 4 - .../compat-i915-headers/gem/i915_gem_lmem.h | 2 + .../compat-i915-headers/gem/i915_gem_mman.h | 17 +++ .../compat-i915-headers/gem/i915_gem_object.h | 76 +++++++++++++ .../gem/i915_gem_object_frontbuffer.h | 4 +- .../drm/xe/compat-i915-headers/i915_config.h | 19 ---- .../xe/compat-i915-headers/i915_gem_stolen.h | 13 ++- .../gpu/drm/xe/compat-i915-headers/i915_vma.h | 6 ++ 17 files changed, 205 insertions(+), 236 deletions(-) create mode 100644 drivers/gpu/drm/xe/compat-i915-headers/gem/i915_gem_lmem.h create mode 100644 drivers/gpu/drm/xe/compat-i915-headers/gem/i915_gem_mman.h create mode 100644 drivers/gpu/drm/xe/compat-i915-headers/gem/i915_gem_object.h delete mode 100644 drivers/gpu/drm/xe/compat-i915-headers/i915_config.h
Signature · 1 line
2.39.2
PATCH 1/9 drm/i915: Use drm_atomic_helper_wait_for_fences helper.
From: Maarten Lankhorst <[email protected]>
The fence api specifies you should wait for fence to completion, not give up after whatever timeout was originally configured. The fences themselves should prevent the timeout from being indefinite.
--- .../gpu/drm/i915/display/intel_atomic_plane.c | 1 - drivers/gpu/drm/i915/display/intel_display.c | 23 +------------------ 2 files changed, 1 insertion(+), 23 deletions(-)
drivers/gpu/drm/i915/display/intel_atomic_plane.c +0 -1
@@ -38,7 +38,6 @@#include <drm/drm_blend.h> #include <drm/drm_fourcc.h> -#include "i915_config.h" #include "i915_reg.h" #include "intel_atomic_plane.h" #include "intel_cdclk.h"
drivers/gpu/drm/i915/display/intel_display.c +1 -22
@@ -50,7 +50,6 @@#include "g4x_dp.h" #include "g4x_hdmi.h" #include "hsw_ips.h" -#include "i915_config.h" #include "i915_drv.h" #include "i915_reg.h" #include "i915_utils.h"
@@ -7055,26 +7054,6 @@ void intel_atomic_helper_free_state_worker(struct work_struct *work)intel_atomic_helper_free_state (dev_priv); } -static void intel_atomic_commit_fence_wait (struct intel_atomic_state *intel_state) -{ -struct drm_i915_private *i915 =to_i915 (intel_state->base.dev); -struct drm_plane *plane; -struct drm_plane_state *new_plane_state; -int ret, i; - -for_each_new_plane_in_state (&intel_state->base, plane, new_plane_state, i) { -if (new_plane_state->fence) { - ret =dma_fence_wait_timeout (new_plane_state->fence, false, -i915_fence_timeout (i915)); -if (ret <=0 ) -break ; - -dma_fence_put (new_plane_state->fence); - new_plane_state->fence =NULL ; - } - } -} -static void intel_atomic_cleanup_work (struct work_struct *work) { struct intel_atomic_state *state =
@@ -7180,7 +7159,7 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)intel_wakeref_t wakeref =0 ;int i; -intel_atomic_commit_fence_wait (state); +drm_atomic_helper_wait_for_fences (dev, &state->base, false);drm_atomic_helper_wait_for_dependencies (&state->base);drm_dp_mst_atomic_wait_for_dependencies (&state->base);
Signature · 1 line
2.39.2
Re: [Intel-xe] [1/9] drm/i915: Use drm_atomic_helper_wait_for_fences helper.
Quoted 7 lines · Maarten Lankhorst
From: Maarten Lankhorst <[email protected]>
The fence api specifies you should wait for fence to completion, not give up after whatever timeout was originally configured. The fences themselves should prevent the timeout from being indefinite.
Signed-off-by Maarten Lankhorst <[email protected]>
This is not blocking anything in drm-xe-next and not really related to this patch set either. I think we can just fine go through the review and ci testing in intel-gfx mailing list and backport from there/or get it via rebase.
BR,
Jouni Högander
Quoted 75 lines
---
.../gpu/drm/i915/display/intel_atomic_plane.c | 1 - drivers/gpu/drm/i915/display/intel_display.c | 23 +---------------- --2 files changed, 1 insertion(+), 23 deletions(-)drivers/gpu/drm/i915/display/intel_atomic_plane.c +0
-0@@ -38,7 +38,6 @@ #include <drm/drm_blend.h> #include <drm/drm_fourcc.h>
-#include "i915_config.h"
#include "i915_reg.h"
#include "intel_atomic_plane.h"
#include "intel_cdclk.h"drivers/gpu/drm/i915/display/intel_display.c +0
-1@@ -50,7 +50,6 @@ #include "g4x_dp.h" #include "g4x_hdmi.h" #include "hsw_ips.h" -#include "i915_config.h" #include "i915_drv.h" #include "i915_reg.h" #include "i915_utils.h"@@ -7055,26 +7054,6 @@ void intel_atomic_helper_free_state_worker(struct work_struct *work) intel_atomic_helper_free_state(dev_priv); }
-static voidintel_atomic_commit_fence_wait(struct intel_atomic_state *intel_state)
-{
- structdrm_i915_private*i915 = to_i915(intel_state-Quoted 1 line
base.dev);
- struct
drm_plane*plane;
- structdrm_plane_state*new_plane_state;
- int ret, i;
-
- for_each_new_plane_in_state(&intel_state->base, plane,new_plane_state, i) {
- if (new_plane_state->fence) {
- ret = dma_fence_wait_timeout(new_plane_state-Quoted 1 line
fence, false,
-
i915_fence_timeout(i915));
- if (ret <= 0)
- break;drivers/gpu/drm/i915/display/intel_display.c +0
-7- - dma_fence_put(new_plane_state->fence); - new_plane_state->fence = NULL; - } - } -} -static void
intel_atomic_cleanup_work(struct work_struct *work){
structintel_atomic_state*state =drivers/gpu/drm/i915/display/intel_display.c +0
-0@@ -7180,7 +7159,7 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state) intel_wakeref_t wakeref = 0; int i;
- intel_atomic_commit_fence_wait(state);
+ drm_atomic_helper_wait_for_fences(dev,&state->base, false);
drm_atomic_helper_wait_for_dependencies(&state->base);drm_dp_mst_atomic_wait_for_dependencies(&state->base);
PATCH 2/9 fixup! drm/xe/display: Implement display support
In reply to Maarten LankhorstFrom: Maarten Lankhorst <[email protected]>
With the previous commit, i915_config.h is no longer used.
--- .../drm/xe/compat-i915-headers/i915_config.h | 19 ------------------- 1 file changed, 19 deletions(-) delete mode 100644 drivers/gpu/drm/xe/compat-i915-headers/i915_config.h
drivers/gpu/drm/xe/compat-i915-headers/i915_config.h deleted +0 -19
@@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: MIT */ -/* -* Copyright © 2023 Intel Corporation -*/ - -#ifndef __I915_CONFIG_H__ -#define __I915_CONFIG_H__ - -#include <linux/sched.h> - -struct drm_i915_private ; - -static inline unsigned long -i915_fence_timeout (const struct drm_i915_private *i915) -{ -return MAX_SCHEDULE_TIMEOUT ; -} - -#endif /* __I915_CONFIG_H__ */
Signature · 1 line
2.39.2
PATCH 3/9 drm/i915/display: Revert all before remaining changes to make xe compile
In reply to Maarten LankhorstFrom: Maarten Lankhorst <[email protected]>
drm/xe/display: Allow scanout of bos that can be migrated to lmem drm/i915/display: Use intel_bo_to_drm_bo instead of obj->base
Can probably be slightly ignored by squashing with next patch, at least for intel_bo_to_drm_bo part.
--- drivers/gpu/drm/i915/display/intel_fb.c | 9 ++-- drivers/gpu/drm/i915/display/intel_fbdev.c | 48 ++++++++-------------- 2 files changed, 22 insertions(+), 35 deletions(-)
drivers/gpu/drm/i915/display/intel_fb.c +4 -5
@@ -1964,10 +1964,10 @@ static int intel_user_framebuffer_dirty(struct drm_framebuffer *fb,if (!atomic_read (&front->bits))return 0 ; -if (dma_resv_test_signaled (intel_bo_to_drm_bo (obj)->resv,dma_resv_usage_rw (false))) +if (dma_resv_test_signaled (obj->base.resv,dma_resv_usage_rw (false))) goto flush; - ret =dma_resv_get_singleton (intel_bo_to_drm_bo (obj)->resv,dma_resv_usage_rw (false), + ret =dma_resv_get_singleton (obj->base.resv,dma_resv_usage_rw (false), &fence);if (ret || !fence) goto flush;
@@ -2227,9 +2227,8 @@ intel_user_framebuffer_create(struct drm_device *dev,return ERR_PTR (-ENOENT ); obj =gem_to_xe_bo (gem); -/* Require vram placement or dma-buf import */ -if (IS_DGFX (i915) && - !xe_bo_can_migrate (gem_to_xe_bo (gem),XE_PL_VRAM0 ) && +/* Require vram exclusive objects, but allow dma-buf imports */ +if (IS_DGFX (i915) && obj->flags &XE_BO_CREATE_SYSTEM_BIT && obj->ttm.type != ttm_bo_type_sg) {drm_gem_object_put (gem);return ERR_PTR (-EREMOTE );
drivers/gpu/drm/i915/display/intel_fbdev.c +18 -30
79 lines not on this page · raw message
Signature · 1 line
2.39.2
Re: [Intel-xe] [3/9] drm/i915/display: Revert all before remaining changes to make xe compile
Quoted 8 lines · Maarten Lankhorst
From: Maarten Lankhorst <[email protected]>
drm/xe/display: Allow scanout of bos that can be migrated to lmem drm/i915/display: Use
intel_bo_to_drm_boinstead ofobj->baseCan probably be slightly ignored by squashing with next patch, at least
forintel_bo_to_drm_bopart.
I don't understand what this patch is about. I think you should improve commit message. Commit message is mentioning revert but it is not clear what are the commits that are reverted?
BR,
Jouni Högander
Quoted 152 lines
Signed-off-by Maarten Lankhorst <[email protected]>---
drivers/gpu/drm/i915/display/intel_fb.c | 9 ++--drivers/gpu/drm/i915/display/intel_fbdev.c| 48 ++++++++------------ --2 files changed, 22 insertions(+), 35 deletions(-)drivers/gpu/drm/i915/display/intel_fb.c +0
-0@@ -1964,10 +1964,10 @@ static int intel_user_framebuffer_dirty(struct drm_framebuffer *fb, if (!atomic_read(&front->bits)) return 0;
- if (dma_resv_test_signaled(intel_bo_to_drm_bo(obj)->resv, dma_resv_usage_rw(false)))
+ if (dma_resv_test_signaled(obj->base.resv, dma_resv_usage_rw(false)))
goto flush;
- ret = dma_resv_get_singleton(intel_bo_to_drm_bo(obj)->resv,dma_resv_usage_rw(false),
+ ret = dma_resv_get_singleton(obj->base.resv,dma_resv_usage_rw(false),
&fence);
if (ret || !fence)
goto flush;drivers/gpu/drm/i915/display/intel_fb.c +0
-0@@ -2227,9 +2227,8 @@ intel_user_framebuffer_create(struct drm_device *dev, return ERR_PTR(-ENOENT);
obj =gem_to_xe_bo(gem);
- /* Require vram placement or dma-buf import */
- if (IS_DGFX(i915)&&
- !xe_bo_can_migrate(gem_to_xe_bo(gem),XE_PL_VRAM0) && + /* Require vram exclusive objects, but allow dma-buf imports */
+ if (IS_DGFX(i915)&&obj->flags&XE_BO_CREATE_SYSTEM_BIT&&obj->ttm.type!=ttm_bo_type_sg) {drm_gem_object_put(gem);
returnERR_PTR(-EREMOTE);drivers/gpu/drm/i915/display/intel_fbdev.c +0
-1@@ -48,7 +48,6 @@ #include "gem/i915_gem_mman.h" #else #include "xe_gt.h" -#include "xe_ttm_stolen_mgr.h" #endif
#include "i915_drv.h"drivers/gpu/drm/i915/display/intel_fbdev.c +0
-0@@ -193,8 +192,8 @@ static int intelfb_alloc(struct drm_fb_helper *helper,
size = mode_cmd.pitches[0] * mode_cmd.height; size =PAGE_ALIGN(size);
- obj =ERR_PTR(-ENODEV);
#ifdef I915
+ obj =ERR_PTR(-ENODEV);
if (HAS_LMEM(dev_priv)) {
obj = i915_gem_object_create_lmem(dev_priv, size,I915_BO_ALLOC_CONTIGUOUS|drivers/gpu/drm/i915/display/intel_fbdev.c +0
-4@@ -213,23 +212,11 @@ static int intelfb_alloc(struct drm_fb_helper *helper, obj = i915_gem_object_create_shmem(dev_priv, size); } #else - if (!IS_DGFX(dev_priv)) { - obj = xe_bo_create_pin_map(dev_priv, xe_device_get_root_tile(dev_priv), - NULL, size, - ttm_bo_type_kernel,
XE_BO_SCANOUT_BIT|
-XE_BO_CREATE_STOLEN_BIT| -XE_BO_CREATE_PINNED_BIT); - if (!IS_ERR(obj))
- drm_info(&dev_priv->drm, "Allocated fbdev into stolen\n");
- else
- drm_info(&dev_priv->drm, "Allocated fbdev into stolen failed: %li\n",PTR_ERR(obj));
- }
- if (IS_ERR(obj)) {
- obj = xe_bo_create_pin_map(dev_priv,xe_device_get_root_tile(dev_priv), NULL, size,
-ttm_bo_type_kernel,XE_BO_SCANOUT_BIT|
- XE_BO_CREATE_VRAM_IF_DGFX(xe_device_get_root_tile(dev_priv)) | -XE_BO_CREATE_PINNED_BIT); - }
+ /* XXX: Care about stolen? */
+ obj = xe_bo_create_pin_map(dev_priv,to_gt(dev_priv), NULL, size,
+ttm_bo_type_kernel,
+
XE_BO_CREATE_VRAM_IF_DGFX(to_gt(dev_priv)) |
+XE_BO_CREATE_PINNED_BIT|XE_BO_SCANOUT_BIT);
#endif
if (IS_ERR(obj)) {drivers/gpu/drm/i915/display/intel_fbdev.c +0
-0@@ -365,23 +352,24 @@ static int intelfb_create(struct drm_fb_helper *helper, }
#else
- if (!(obj->flags &XE_BO_CREATE_SYSTEM_BIT)) {
- if (obj->flags&XE_BO_CREATE_STOLEN_BIT) - info->fix.smem_start =xe_ttm_stolen_io_offset(obj, 0);
- else
- info->fix.smem_start =
- pci_resource_start(pdev, 2) + - xe_bo_addr(obj, 0,XE_PAGE_SIZE); + /* XXX: Could be pure fiction.. */
+ if (obj->flags&XE_BO_CREATE_VRAM0_BIT) {
+ structxe_gt*gt =to_gt(dev_priv);
+ bool lmem;
+ info->fix.smem_start =
+ (unsigned long)(gt->mem.vram.io_start +xe_bo_addr(obj, 0, 4096, &lmem));
info->fix.smem_len =obj->ttm.base.size;
+
} else {
- /* XXX: Pure fiction, as the BO may not be physically accessible.. */
- info->fix.smem_start = 0;
+ structpci_dev*pdev =to_pci_dev(dev_priv->drm.dev); +
+ info->fix.smem_start =pci_resource_start(pdev, 2)+xe_bo_ggtt_addr(obj);
info->fix.smem_len =obj->ttm.base.size;
}
- XE_WARN_ON(iosys_map_is_null(&obj->vmap));
- vaddr =obj->vmap.vaddr_iomem;
+ /* TODO:ttm_bo_kmap? */
+ vaddr =obj->vmap.vaddr;
#endif
if (IS_ERR(vaddr)) {
drm_err(&dev_priv->drm,
PATCH 4/9 drm/i915/display: Revert remaining changes to make xe compile
In reply to Maarten LankhorstShould be split out instead. This should effectively revert the complete patch.
--- .../gpu/drm/i915/display/intel_atomic_plane.c | 8 +- drivers/gpu/drm/i915/display/intel_cursor.c | 8 +- drivers/gpu/drm/i915/display/intel_display.c | 35 ------- .../drm/i915/display/intel_display_types.h | 4 - drivers/gpu/drm/i915/display/intel_fb.c | 81 +++------------- drivers/gpu/drm/i915/display/intel_fbc.c | 13 ++- drivers/gpu/drm/i915/display/intel_fbdev.c | 95 ++----------------- .../gpu/drm/i915/display/intel_frontbuffer.c | 7 +- .../gpu/drm/i915/display/intel_frontbuffer.h | 4 - .../drm/i915/display/skl_universal_plane.c | 4 - 10 files changed, 40 insertions(+), 219 deletions(-)
drivers/gpu/drm/i915/display/intel_atomic_plane.c +4 -4
@@ -1069,10 +1069,10 @@ static int intel_prepare_plane_fb(struct drm_plane *_plane, struct drm_plane_state *_new_plane_state) { - struct intel_plane_state *new_plane_state = -to_intel_plane_state (_new_plane_state); struct i915_sched_attr attr = { .priority = I915_PRIORITY_DISPLAY };struct intel_plane *plane =to_intel_plane (_plane); +struct intel_plane_state *new_plane_state = +to_intel_plane_state (_new_plane_state);struct intel_atomic_state *state =to_intel_atomic_state (new_plane_state->uapi.state);struct drm_i915_private *dev_priv =to_i915 (plane->base.dev);
@@ -1156,9 +1156,9 @@ intel_cleanup_plane_fb(struct drm_plane *plane, {struct intel_plane_state *old_plane_state =to_intel_plane_state (_old_plane_state); -__maybe_unused struct intel_atomic_state *state = +struct intel_atomic_state *state =to_intel_atomic_state (old_plane_state->uapi.state); -__maybe_unused struct drm_i915_private *dev_priv =to_i915 (plane->dev); +struct drm_i915_private *dev_priv =to_i915 (plane->dev);struct drm_i915_gem_object *obj =intel_fb_obj (old_plane_state->hw.fb);if (!obj)
drivers/gpu/drm/i915/display/intel_cursor.c +3 -5
@@ -30,17 +30,15 @@ static const u32 intel_cursor_formats[] = {static u32 intel_cursor_base (const struct intel_plane_state *plane_state) { -__maybe_unused struct drm_i915_private *dev_priv = +struct drm_i915_private *dev_priv =to_i915 (plane_state->uapi.plane->dev); -__maybe_unused const struct drm_framebuffer *fb = plane_state->hw.fb; -__maybe_unused const struct drm_i915_gem_object *obj =intel_fb_obj (fb); +const struct drm_framebuffer *fb = plane_state->hw.fb; +const struct drm_i915_gem_object *obj =intel_fb_obj (fb);u32 base; -#ifdef I915 if (DISPLAY_INFO (dev_priv)->cursor_needs_physical) base =sg_dma_address (obj->mm.pages->sgl);else -#endif base =intel_plane_ggtt_offset (plane_state);return base + plane_state->view.color_plane[0 ].offset;
drivers/gpu/drm/i915/display/intel_display.c +0 -35
@@ -42,10 +42,8 @@#include <drm/drm_probe_helper.h> #include <drm/drm_rect.h> -#ifdef I915 #include "gem/i915_gem_lmem.h" #include "gem/i915_gem_object.h" -#endif #include "g4x_dp.h" #include "g4x_hdmi.h"
@@ -7073,39 +7071,6 @@ static void intel_atomic_cleanup_work(struct work_struct *work)intel_atomic_helper_free_state (i915); } -#ifndef I915 -static int i915_gem_object_read_from_page (struct xe_bo *bo, -u32 ofs,u64 *ptr,u32 size) -{ -struct ttm_bo_kmap_obj map; -void *virtual; -bool is_iomem; -int ret; - -XE_WARN_ON (size !=8 ); - - ret =xe_bo_lock (bo, true); -if (ret) -return ret; - - ret =ttm_bo_kmap (&bo->ttm, ofs >>PAGE_SHIFT ,1 , &map); -if (ret) - goto out_unlock; - - ofs &= ~PAGE_MASK ; - virtual =ttm_kmap_obj_virtual (&map, &is_iomem); -if (is_iomem) - *ptr =readq ((void __iomem *)(virtual + ofs)); -else - *ptr = *(u64 *)(virtual + ofs); - -ttm_bo_kunmap (&map); -out_unlock: -xe_bo_unlock (bo); -return ret; -} -#endif -static void intel_atomic_prepare_plane_clear_colors (struct intel_atomic_state *state) {struct drm_i915_private *i915 =to_i915 (state->base.dev);
drivers/gpu/drm/i915/display/intel_display_types.h +0 -4
@@ -2111,11 +2111,7 @@ intel_crtc_needs_color_update(const struct intel_crtc_state *crtc_state)static inline u32 intel_plane_ggtt_offset (const struct intel_plane_state *plane_state) { -#ifdef I915 return i915_ggtt_offset (plane_state->ggtt_vma); -#else -return plane_state->ggtt_vma->node.start; -#endif } static inline struct intel_frontbuffer *
drivers/gpu/drm/i915/display/intel_fb.c +12 -69
208 lines not on this page · raw message
drivers/gpu/drm/i915/display/intel_fbc.c +9 -4
@@ -453,7 +453,6 @@ static void g4x_fbc_program_cfb(struct intel_fbc *fbc)intel_de_write (i915,DPFC_CB_BASE ,i915_gem_stolen_node_offset (&fbc->compressed_fb)); - }static const struct intel_fbc_funcs g4x_fbc_funcs = {
@@ -612,8 +611,10 @@ static void ivb_fbc_activate(struct intel_fbc *fbc)else if (DISPLAY_VER (i915) ==9 )skl_fbc_program_cfb_stride (fbc); +#ifdef I915 if (intel_gt_support_legacy_fencing (to_gt (i915)))snb_fbc_program_fence (fbc); +#endif intel_de_write (i915,ILK_DPFC_CONTROL (fbc->id),DPFC_CTL_EN |ivb_dpfc_ctl (fbc));
@@ -800,7 +801,6 @@ static int intel_fbc_alloc_cfb(struct intel_fbc *fbc,drm_dbg_kms (&i915->drm,"reserved %llu bytes of contiguous stolen space for FBC, limit: %d\n" ,i915_gem_stolen_node_size (&fbc->compressed_fb), fbc->limit); -return 0 ; err_llb:
@@ -978,7 +978,7 @@ static void intel_fbc_update_state(struct intel_atomic_state *state,struct intel_crtc *crtc, struct intel_plane *plane) { - struct drm_i915_private *i915 = to_i915(state->base.dev); + __maybe_unused struct drm_i915_private *i915 = to_i915(state->base.dev);const struct intel_crtc_state *crtc_state =intel_atomic_get_new_crtc_state (state, crtc); const struct intel_plane_state *plane_state =
@@ -993,7 +993,7 @@ static void intel_fbc_update_state(struct intel_atomic_state *state,/* FBC1 compression interval: arbitrary choice of 1 second */ fbc_state->interval =drm_mode_vrefresh (&crtc_state->hw.adjusted_mode); - +#ifdef I915 fbc_state->fence_y_offset =intel_plane_fence_y_offset (plane_state); drm_WARN_ON(&i915->drm, plane_state->flags & PLANE_HAS_FENCE &&
@@ -1002,6 +1002,7 @@ static void intel_fbc_update_state(struct intel_atomic_state *state,if (plane_state->flags &PLANE_HAS_FENCE ) fbc_state->fence_id =i915_vma_fence_id (plane_state->ggtt_vma); else +#endif fbc_state->fence_id =-1 ; fbc_state->cfb_stride =intel_fbc_cfb_stride (plane_state);
@@ -1011,6 +1012,7 @@ static void intel_fbc_update_state(struct intel_atomic_state *state,static bool intel_fbc_is_fence_ok (const struct intel_plane_state *plane_state) { +#ifdef I915 struct drm_i915_private *i915 =to_i915 (plane_state->uapi.plane->dev);/*
@@ -1028,6 +1030,9 @@ static bool intel_fbc_is_fence_ok(const struct intel_plane_state *plane_state)return DISPLAY_VER (i915) >=9 || (plane_state->flags &PLANE_HAS_FENCE &&i915_vma_fence_id (plane_state->ggtt_vma) !=-1 ); +#else +return true; +#endif }static bool intel_fbc_is_cfb_ok (const struct intel_plane_state *plane_state)
drivers/gpu/drm/i915/display/intel_fbdev.c +8 -87
212 lines not on this page · raw message
drivers/gpu/drm/i915/display/intel_frontbuffer.c +4 -3
@@ -190,7 +190,7 @@ void __intel_fb_flush(struct intel_frontbuffer *front,enum fb_op_origin origin, unsigned int frontbuffer_bits) { - struct drm_i915_private *i915 = intel_bo_to_i915((front->obj)); + struct drm_i915_private *i915 = intel_bo_to_i915(front->obj);if (origin ==ORIGIN_CS ) {spin_lock (&i915->display.fb_tracking.lock);
@@ -259,6 +259,7 @@ static void frontbuffer_release(struct kref *ref)drm_WARN_ON (&intel_bo_to_i915 (obj)->drm,atomic_read (&front->bits));i915_ggtt_clear_scanout (obj); + ret =i915_gem_object_set_frontbuffer (obj,NULL );drm_WARN_ON (&intel_bo_to_i915 (obj)->drm, ret);spin_unlock (&intel_bo_to_i915 (obj)->display.fb_tracking.lock);
@@ -289,12 +290,12 @@ intel_frontbuffer_get(struct drm_i915_gem_object *obj) frontbuffer_retire, I915_ACTIVE_RETIRE_SLEEPS);INIT_WORK (&front->flush_work, intel_frontbuffer_flush_work); +spin_lock (&i915->display.fb_tracking.lock); cur =i915_gem_object_set_frontbuffer (obj, front);spin_unlock (&i915->display.fb_tracking.lock);if (cur != front)kfree (front); -return cur; }
@@ -337,7 +338,7 @@ void intel_frontbuffer_track(struct intel_frontbuffer *old, }if (new) { -drm_WARN_ON (&intel_bo_to_i915 (old->obj)->drm, +drm_WARN_ON (&intel_bo_to_i915 (new->obj)->drm,atomic_read (&new->bits) & frontbuffer_bits);atomic_or (frontbuffer_bits, &new->bits); }
drivers/gpu/drm/i915/display/intel_frontbuffer.h +0 -4
@@ -28,10 +28,6 @@#include <linux/bits.h> #include <linux/kref.h> -#ifndef I915 -#include "xe_bo.h" -#endif -#include "i915_active_types.h" struct drm_i915_private ;
drivers/gpu/drm/i915/display/skl_universal_plane.c +0 -4
@@ -2453,15 +2453,11 @@ skl_get_initial_plane_config(struct intel_crtc *crtc, fb->modifier =DRM_FORMAT_MOD_LINEAR ;break ;case PLANE_CTL_TILED_X : -#ifdef I915 plane_config->tiling =I915_TILING_X ; -#endif fb->modifier =I915_FORMAT_MOD_X_TILED ;break ;case PLANE_CTL_TILED_Y : -#ifdef I915 plane_config->tiling =I915_TILING_Y ; -#endif if (val &PLANE_CTL_RENDER_DECOMPRESSION_ENABLE )if (DISPLAY_VER (dev_priv) >=14 ) fb->modifier =I915_FORMAT_MOD_4_TILED_MTL_RC_CCS ;
Signature · 1 line
2.39.2
PATCH 5/9 drm/xe: Update headers to be more compatible with i915
In reply to Maarten LankhorstAdd more compatibility changes to decrease delta with i915.
--- .../compat-i915-headers/gem/i915_gem_lmem.h | 2 + .../compat-i915-headers/gem/i915_gem_mman.h | 17 +++++ .../compat-i915-headers/gem/i915_gem_object.h | 76 +++++++++++++++++++ .../gem/i915_gem_object_frontbuffer.h | 4 +- .../xe/compat-i915-headers/i915_gem_stolen.h | 13 +++- .../gpu/drm/xe/compat-i915-headers/i915_vma.h | 6 ++ 6 files changed, 113 insertions(+), 5 deletions(-) create mode 100644 drivers/gpu/drm/xe/compat-i915-headers/gem/i915_gem_lmem.h create mode 100644 drivers/gpu/drm/xe/compat-i915-headers/gem/i915_gem_mman.h create mode 100644 drivers/gpu/drm/xe/compat-i915-headers/gem/i915_gem_object.h
drivers/gpu/drm/xe/compat-i915-headers/gem/i915_gem_lmem.h new file +2 -0
@@ -0,0 +1,2 @@ +/* Empty */ +
drivers/gpu/drm/xe/compat-i915-headers/gem/i915_gem_mman.h new file +17 -0
@@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: MIT */ +/* +* Copyright © 2023 Intel Corporation +*/ + +#ifndef _I915_GEM_MMAN_H_ +#define _I915_GEM_MMAN_H_ + +#include "xe_bo_types.h" +#include <drm/drm_prime.h> + +static inline int i915_gem_fb_mmap (struct xe_bo *bo,struct vm_area_struct *vma) +{ +return drm_gem_prime_mmap (&bo->ttm.base, vma); +} + +#endif
drivers/gpu/drm/xe/compat-i915-headers/gem/i915_gem_object.h new file +76 -0
76 lines not on this page · raw message
drivers/gpu/drm/xe/compat-i915-headers/gem/i915_gem_object_frontbuffer.h +2 -2
@@ -3,8 +3,8 @@* Copyright © 2022 Intel Corporation */ -#ifndef _I915_GEM_OBJECT_H_ -#define _I915_GEM_OBJECT_H_ +#ifndef _I915_GEM_OBJECT_FB_H_ +#define _I915_GEM_OBJECT_FB_H_#define i915_gem_object_get_frontbuffer (obj) NULL#define i915_gem_object_set_frontbuffer (obj, front) (front)
drivers/gpu/drm/xe/compat-i915-headers/i915_gem_stolen.h +10 -3
@@ -1,5 +1,5 @@ -#ifndef _I915_GEM_OBJECT_H_ -#define _I915_GEM_OBJECT_H_ +#ifndef _I915_GEM_STOLEN_H_ +#define _I915_GEM_STOLEN_H_#include "xe_ttm_stolen_mgr.h" #include "xe_res_cursor.h"
@@ -70,7 +70,14 @@ static inline u32 i915_gem_stolen_node_offset(struct i915_stolen_fb *fb)/* Used for < gen4. These are not supported by Xe */ #define i915_gem_stolen_area_address (xe) (!WARN_ON(1))/* Used for gen9 specific WA. Gen9 is not supported by Xe */ -#define i915_gem_stolen_area_size (xe) (!WARN_ON(1)) +static inline u64 i915_gem_stolen_area_size (struct xe_device *xe) +{ +struct ttm_resource_manager *ttm_mgr =ttm_manager_type (&xe->ttm,XE_PL_STOLEN ); + +if (!ttm_mgr) +return 0 ; +return ttm_mgr->size; +}#define i915_gem_stolen_node_address (xe, fb) (xe_ttm_stolen_gpu_offset(xe) + \ i915_gem_stolen_node_offset(fb))
drivers/gpu/drm/xe/compat-i915-headers/i915_vma.h +6 -0
@@ -19,4 +19,10 @@ struct i915_vma {#define i915_ggtt_clear_scanout (bo) do { } while (0)#define i915_vma_fence_id (vma) -1 + +static inline u32 i915_ggtt_offset (const struct i915_vma *vma) +{ +return vma->node.start; +} +#endif
Signature · 1 line
2.39.2
PATCH 6/9 FIXME drm/i915/display: add_dma_resv_fences is i915 only
In reply to Maarten LankhorstFrom: Maarten Lankhorst <[email protected]>
I'm 99% sure that this code is no longer needed on i915, but I'm 100% sure it won't be needed for xe.
--- drivers/gpu/drm/i915/display/intel_atomic_plane.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/display/intel_atomic_plane.c +3 -1
@@ -1021,9 +1021,10 @@ int intel_plane_check_src_coordinates(struct intel_plane_state *plane_state)static int add_dma_resv_fences (struct dma_resv *resv,struct drm_plane_state *new_plane_state) { +int ret =0 ; +#ifdef I915 struct dma_fence *fence =dma_fence_get (new_plane_state->fence);struct dma_fence *new; -int ret; ret =dma_resv_get_singleton (resv,dma_resv_usage_rw (false), &new);if (ret)
@@ -1050,6 +1051,7 @@ static int add_dma_resv_fences(struct dma_resv *resv, error:dma_fence_put (fence); +#endif return ret; }
Signature · 1 line
2.39.2
Re: [Intel-xe] [6/9] FIXME drm/i915/display: add_dma_resv_fences is i915 only
Quoted 4 lines · Maarten Lankhorst
From: Maarten Lankhorst <[email protected]>
I'm 99% sure that this code is no longer needed on i915, but I'm 100% sure it won't be needed for xe.
And it does nothing for Xe -> ifdefs added by this patch are just optimization to not build this part for Xe.
This isn't blocking any Xe work so if you think this isn't needed for i915 I think you should send the patch to [email protected]. Do the review and CI testing there and then backport.
BR,
Jouni Högander
Quoted 36 lines
Signed-off-by Maarten Lankhorst <[email protected]>---
drivers/gpu/drm/i915/display/intel_atomic_plane.c | 4 +++-1 file changed, 3 insertions(+), 1 deletion(-)drivers/gpu/drm/i915/display/intel_atomic_plane.c +0
-0@@ -1021,9 +1021,10 @@ int intel_plane_check_src_coordinates(struct intel_plane_state *plane_state) static int add_dma_resv_fences(struct dma_resv *resv,struct
drm_plane_state*new_plane_state)
{
+ int ret = 0;
+#ifdef I915
structdma_fence*fence = dma_fence_get(new_plane_state-Quoted 1 line
fence);
struct
dma_fence*new;
- int ret;
ret =dma_resv_get_singleton(resv, dma_resv_usage_rw(false), &new);
if (ret)drivers/gpu/drm/i915/display/intel_atomic_plane.c +0
-0@@ -1050,6 +1051,7 @@ static int add_dma_resv_fences(struct dma_resv *resv,
error:
dma_fence_put(fence);
+#endif
return ret;
}
PATCH 7/9 drm/i915/display: Use i915_gem_object_get_dma_address to get dma address
In reply to Maarten LankhorstWorks better for xe like that. obj is no longer const.
--- drivers/gpu/drm/i915/display/intel_cursor.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/gpu/drm/i915/display/intel_cursor.c +4 -2
@@ -23,6 +23,8 @@#include "intel_psr.h" #include "skl_watermark.h" +#include "gem/i915_gem_object.h" +/* Cursor formats */ static const u32 intel_cursor_formats[] = {DRM_FORMAT_ARGB8888 ,
@@ -33,11 +35,11 @@ static u32 intel_cursor_base(const struct intel_plane_state *plane_state)struct drm_i915_private *dev_priv =to_i915 (plane_state->uapi.plane->dev);const struct drm_framebuffer *fb = plane_state->hw.fb; -const struct drm_i915_gem_object *obj =intel_fb_obj (fb); +struct drm_i915_gem_object *obj =intel_fb_obj (fb);u32 base;if (DISPLAY_INFO (dev_priv)->cursor_needs_physical) - base =sg_dma_address (obj->mm.pages->sgl); + base =i915_gem_object_get_dma_address (obj,0 );else base =intel_plane_ggtt_offset (plane_state);
Signature · 1 line
2.39.2
Re: [Intel-xe] [7/9] drm/i915/display: Use i915_gem_object_get_dma_address to get dma address
Quoted 1 line · Maarten Lankhorst
Works better for xe like that. obj is no longer const.
This should be sent to [email protected].
BR,
Jouni Högander
Quoted 35 lines
Signed-off-by Maarten Lankhorst <[email protected]>---
drivers/gpu/drm/i915/display/intel_cursor.c | 6 ++++--1 file changed, 4 insertions(+), 2 deletions(-)drivers/gpu/drm/i915/display/intel_cursor.c +0
-0@@ -23,6 +23,8 @@ #include "intel_psr.h" #include "skl_watermark.h"drivers/gpu/drm/i915/display/intel_cursor.c +2
-0+#include "gem/i915_gem_object.h" +/* Cursor formats */
static const u32 intel_cursor_formats[] = {
DRM_FORMAT_ARGB8888,drivers/gpu/drm/i915/display/intel_cursor.c +0
-0@@ -33,11 +35,11 @@ static u32 intel_cursor_base(const struct intel_plane_state *plane_state)struct
drm_i915_private*dev_priv=to_i915(plane_state->uapi.plane->dev); const structdrm_framebuffer*fb =plane_state->hw.fb; - const structdrm_i915_gem_object*obj =intel_fb_obj(fb); + structdrm_i915_gem_object*obj =intel_fb_obj(fb); u32 base;
if (DISPLAY_INFO(dev_priv)->cursor_needs_physical) - base =sg_dma_address(obj->mm.pages->sgl); + base =i915_gem_object_get_dma_address(obj, 0); else
base =intel_plane_ggtt_offset(plane_state);
PATCH 8/9 FIXME drm/i915/display: Minimal changes to fbdev to make xe work
In reply to Maarten LankhorstBO creation, allocation and placement is slightly different from i915 vs xe.
This is one of the few times we cannot hide between macros, so make the most of it. :)
--- drivers/gpu/drm/i915/display/intel_fbdev.c | 79 +++++++++++++++++++--- 1 file changed, 70 insertions(+), 9 deletions(-)
drivers/gpu/drm/i915/display/intel_fbdev.c +70 -9
@@ -45,6 +45,7 @@#include "gem/i915_gem_lmem.h" #include "gem/i915_gem_mman.h" +#include "gem/i915_gem_object.h" #include "i915_drv.h" #include "intel_display_types.h"
@@ -173,6 +174,7 @@ static int intelfb_alloc(struct drm_fb_helper *helper, size =PAGE_ALIGN (size); obj =ERR_PTR (-ENODEV ); +#ifdef I915 if (HAS_LMEM (dev_priv)) { obj = i915_gem_object_create_lmem(dev_priv, size, I915_BO_ALLOC_CONTIGUOUS |
@@ -185,11 +187,35 @@ static int intelfb_alloc(struct drm_fb_helper *helper,* * Also skip stolen on MTL as Wa_22018444074 mitigation. */ -if (!(IS_METEORLAKE (dev_priv )) && size *2 < dev_priv->dsm.usable_size) +if (!(IS_METEORLAKE (dev_priv )) && + size *2 <i915_gem_stolen_area_size (dev_priv)) obj =i915_gem_object_create_stolen (dev_priv, size);if (IS_ERR (obj)) obj =i915_gem_object_create_shmem (dev_priv, size); } +#else +/* +* The semantics for xe_bo_create_pin_map are different from those +* of i915_gem_object_create_*(), and need to be destroyed with +* xe_bo_unpin_map_no_vm(). +*/ +if (!IS_DGFX (dev_priv) && !IS_METEORLAKE (dev_priv) && + size *2 <i915_gem_stolen_area_size (dev_priv)) { + obj =xe_bo_create_pin_map (dev_priv,xe_device_get_root_tile (dev_priv), +NULL , size, ttm_bo_type_kernel, +XE_BO_CREATE_STOLEN_BIT | +XE_BO_CREATE_PINNED_BIT |XE_BO_SCANOUT_BIT ); +if (!IS_ERR (obj)) +drm_info (&dev_priv->drm,"Allocated fbdev into stolen\n" ); +else +drm_info (&dev_priv->drm,"Allocated fbdev into stolen failed: %li\n" ,PTR_ERR (obj)); + } +if (IS_ERR (obj)) + obj =xe_bo_create_pin_map (dev_priv,xe_device_get_root_tile (dev_priv), +NULL , size, ttm_bo_type_kernel, +XE_BO_CREATE_VRAM_IF_DGFX (xe_device_get_root_tile (dev_priv)) | +XE_BO_CREATE_PINNED_BIT |XE_BO_SCANOUT_BIT ); +#endif if (IS_ERR (obj)) {drm_err (&dev_priv->drm,"failed to allocate framebuffer (%pe)\n" , obj);
@@ -197,10 +223,18 @@ static int intelfb_alloc(struct drm_fb_helper *helper, } fb =intel_framebuffer_create (obj, &mode_cmd); -i915_gem_object_put (obj); -if (IS_ERR (fb)) +if (IS_ERR (fb)) { +#ifdef I915 +i915_gem_object_put (obj); +#else +/* undo pin/map, or we get a WARN */ +xe_bo_unpin_map_no_vm (obj); +#endif return PTR_ERR (fb); + } +/* reference transferred to fb */ +drm_gem_object_put (intel_bo_to_drm_bo (obj)); ifbdev->fb =to_intel_framebuffer (fb);return 0 ; }
@@ -213,7 +247,6 @@ static int intelfb_create(struct drm_fb_helper *helper,struct drm_device *dev = helper->dev;struct drm_i915_private *dev_priv =to_i915 (dev);struct pci_dev *pdev =to_pci_dev (dev_priv->drm.dev); -struct i915_ggtt *ggtt =to_gt (dev_priv)->ggtt;const struct i915_gtt_view view = { .type =I915_GTT_VIEW_NORMAL , };
@@ -224,8 +257,10 @@ static int intelfb_create(struct drm_fb_helper *helper,bool prealloc = false;void __iomem *vaddr;struct drm_i915_gem_object *obj; -struct i915_gem_ww_ctx ww;int ret; +#ifdef I915 +struct i915_gem_ww_ctx ww; +#endif mutex_lock (&ifbdev->hpd_lock); ret = ifbdev->hpd_suspended ? -EAGAIN :0 ;
@@ -283,6 +318,7 @@ static int intelfb_create(struct drm_fb_helper *helper, info->fbops = &intelfb_ops; obj =intel_fb_obj (&intel_fb->base); +#ifdef I915 if (i915_gem_object_is_lmem (obj)) {struct intel_memory_region *mem = obj->mm.region;
@@ -292,6 +328,8 @@ static int intelfb_create(struct drm_fb_helper *helper, i915_gem_object_get_dma_address(obj, 0)); info->fix.smem_len = obj->base.size; }else { +struct i915_ggtt *ggtt =to_gt (dev_priv)->ggtt; +/* Our framebuffer is the entirety of fbdev's system memory */ info->fix.smem_start = (unsigned long )(ggtt->gmadr.start +i915_ggtt_offset (vma));
@@ -312,12 +350,35 @@ static int intelfb_create(struct drm_fb_helper *helper, continue; } } +#else +if (obj->flags &XE_BO_CREATE_STOLEN_BIT ) { + info->fix.smem_start =xe_ttm_stolen_io_offset (obj,0 ); + }else { +struct pci_dev *pdev =to_pci_dev (dev_priv->drm.dev); + + info->fix.smem_start =pci_resource_start (pdev,2 ); +if (obj->flags &XE_BO_CREATE_VRAM0_BIT ) + info->fix.smem_start +=xe_bo_addr (obj,0 ,XE_PAGE_SIZE ); +else + info->fix.smem_start +=xe_bo_ggtt_addr (obj); + } + info->fix.smem_len = obj->ttm.base.size; + +XE_WARN_ON (iosys_map_is_null (&obj->vmap)); + vaddr = obj->vmap.vaddr_iomem; +#endif +if (IS_ERR (vaddr)) { +drm_err (&dev_priv->drm, +"Failed to remap framebuffer into virtual memory (%pe)\n" , vaddr); + ret =PTR_ERR (vaddr); + goto out_unpin; + }if (ret) goto out_unpin; info->screen_base = vaddr; - info->screen_size = vma->size; + info->screen_size =intel_bo_to_drm_bo (obj)->size;drm_fb_helper_fill_info (info, &ifbdev->helper, sizes);
@@ -325,7 +386,7 @@ static int intelfb_create(struct drm_fb_helper *helper,* If the object is stolen however, it will be full of whatever * garbage was left in there. */ -if (!i915_gem_object_is_shmem (vma->obj) && !prealloc) +if (!i915_gem_object_is_shmem (obj) && !prealloc)memset_io (info->screen_base,0 , info->screen_size);/* Use default scratch pixmap (info->pixmap.flags = FB_PIXMAP_SYSTEM) */
@@ -424,12 +485,12 @@ static bool intel_fbdev_init_bios(struct drm_device *dev,continue ; } -if (obj->base.size > max_size) { +if (intel_bo_to_drm_bo (obj)->size > max_size) {drm_dbg_kms (&i915->drm,"found possible fb from [PLANE:%d:%s]\n" , plane->base.base.id, plane->base.name); fb =to_intel_framebuffer (plane_state->uapi.fb); - max_size = obj->base.size; + max_size =intel_bo_to_drm_bo (obj)->size; } }
Signature · 1 line
2.39.2
PATCH 9/9 FIXME drm/i915/display: Make intel_fb.c code compatible with xe
In reply to Maarten LankhorstFrom: Maarten Lankhorst <[email protected]>
Again there are a few changes between Xe and i915, but in general code is similar for both
--- drivers/gpu/drm/i915/display/intel_fb.c | 85 +++++++++++++++++-------- 1 file changed, 57 insertions(+), 28 deletions(-)
drivers/gpu/drm/i915/display/intel_fb.c +57 -28
@@ -17,6 +17,8 @@#include "intel_fb.h" #include "intel_frontbuffer.h" +#include "gem/i915_gem_object.h" +#define check_array_bounds (i915, a, i) drm_WARN_ON(&(i915)->drm, (i) >= ARRAY_SIZE(a))/*
@@ -737,7 +739,7 @@ intel_fb_align_height(const struct drm_framebuffer *fb,return ALIGN (height, tile_height); } -static unsigned int intel_fb_modifier_to_tiling (u64 fb_modifier) +__maybe_unused static unsigned int intel_fb_modifier_to_tiling (u64 fb_modifier) {u8 tiling_caps =lookup_modifier (fb_modifier)->plane_caps &INTEL_PLANE_CAP_TILING_MASK ;
@@ -1657,10 +1659,10 @@ int intel_fill_fb_info(struct drm_i915_private *i915, struct intel_framebuffer * max_size =max (max_size, offset + size); } -if (mul_u32_u32 (max_size, tile_size) > obj->base.size) { +if (mul_u32_u32 (max_size, tile_size) >intel_bo_to_drm_bo (obj)->size) {drm_dbg_kms (&i915->drm,"fb too big for bo (need %llu bytes, have %zu bytes)\n" , -mul_u32_u32 (max_size, tile_size), obj->base.size); +mul_u32_u32 (max_size, tile_size),intel_bo_to_drm_bo (obj)->size);return -EINVAL ; }
@@ -1907,7 +1909,7 @@ static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb, unsigned int *handle) {struct drm_i915_gem_object *obj =intel_fb_obj (fb); -struct drm_i915_private *i915 =to_i915 (obj->base.dev); +struct drm_i915_private *i915 =to_i915 (fb->dev);if (i915_gem_object_is_userptr (obj)) { drm_dbg(&i915->drm,
@@ -1915,7 +1917,7 @@ static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb,return -EINVAL ; } -return drm_gem_handle_create (file, &obj->base, handle); +return drm_gem_handle_create (file,intel_bo_to_drm_bo (obj), handle); }struct frontbuffer_fence_cb {
@@ -1948,10 +1950,10 @@ static int intel_user_framebuffer_dirty(struct drm_framebuffer *fb,if (!atomic_read (&front->bits))return 0 ; -if (dma_resv_test_signaled (obj->base.resv,dma_resv_usage_rw (false))) +if (dma_resv_test_signaled (intel_bo_to_drm_bo (obj)->resv,dma_resv_usage_rw (false))) goto flush; - ret =dma_resv_get_singleton (obj->base.resv,dma_resv_usage_rw (false), + ret =dma_resv_get_singleton (intel_bo_to_drm_bo (obj)->resv,dma_resv_usage_rw (false), &fence);if (ret || !fence) goto flush;
@@ -1993,10 +1995,10 @@ int intel_framebuffer_init(struct intel_framebuffer *intel_fb,struct drm_i915_gem_object *obj, struct drm_mode_fb_cmd2 *mode_cmd) { - struct drm_i915_private *dev_priv = to_i915(obj->base.dev); + struct drm_i915_private *dev_priv = intel_bo_to_i915(obj);struct drm_framebuffer *fb = &intel_fb->base;u32 max_stride; -unsigned int tiling, stride; +unsigned int tiling =I915_TILING_NONE , stride =0 ;int ret = -EINVAL ;int i;
@@ -2004,6 +2006,7 @@ int intel_framebuffer_init(struct intel_framebuffer *intel_fb,if (!intel_fb->frontbuffer)return -ENOMEM ; +#ifdef I915 i915_gem_object_lock (obj,NULL ); tiling =i915_gem_object_get_tiling (obj); stride =i915_gem_object_get_stride (obj);
@@ -2030,15 +2033,6 @@ int intel_framebuffer_init(struct intel_framebuffer *intel_fb, } } -if (!drm_any_plane_has_format (&dev_priv->drm, - mode_cmd->pixel_format, - mode_cmd->modifier[0 ])) { -drm_dbg_kms (&dev_priv->drm, -"unsupported pixel format %p4cc / modifier 0x%llx\n" , - &mode_cmd->pixel_format, mode_cmd->modifier[0 ]); - goto err; - } -/* * gen2/3 display engine uses the fence if present, * so the tiling mode must match the fb modifier exactly.
@@ -2049,6 +2043,36 @@ int intel_framebuffer_init(struct intel_framebuffer *intel_fb, "tiling_mode must match fb modifier exactly on gen2/3\n"); goto err; } +#else + ret =ttm_bo_reserve (&obj->ttm, true, false,NULL ); +if (ret) + goto err; + ret = -EINVAL ; + +if (!(obj->flags &XE_BO_SCANOUT_BIT )) { +/* +* XE_BO_SCANOUT_BIT should ideally be set at creation, or is +* automatically set when creating FB. We cannot change caching +* mode when the object is VM_BINDed, so we can only set +* coherency with display when unbound. +*/ +if (XE_IOCTL_DBG (dev_priv, !list_empty (&obj->ttm.base.gpuva.list))) { +ttm_bo_unreserve (&obj->ttm); + goto err; + } + obj->flags |=XE_BO_SCANOUT_BIT ; + } +ttm_bo_unreserve (&obj->ttm); +#endif + +if (!drm_any_plane_has_format (&dev_priv->drm, + mode_cmd->pixel_format, + mode_cmd->modifier[0 ])) { +drm_dbg_kms (&dev_priv->drm, +"unsupported pixel format %p4cc / modifier 0x%llx\n" , + &mode_cmd->pixel_format, mode_cmd->modifier[0 ]); + goto err; + } max_stride =intel_fb_max_stride (dev_priv, mode_cmd->pixel_format, mode_cmd->modifier[0 ]);
@@ -2111,11 +2135,7 @@ int intel_framebuffer_init(struct intel_framebuffer *intel_fb, } } -#ifdef I915 - fb->obj[i] = &obj->base; -#else - fb->obj[i] = &obj->ttm.base; -#endif + fb->obj[i] =intel_bo_to_drm_bo (obj); } ret =intel_fill_fb_info (dev_priv, intel_fb);
@@ -2163,23 +2183,32 @@ intel_user_framebuffer_create(struct drm_device *dev,struct drm_framebuffer *fb;struct drm_i915_gem_object *obj;struct drm_mode_fb_cmd2 mode_cmd = *user_mode_cmd; -struct drm_i915_private *i915; +struct drm_i915_private *i915 =to_i915 (dev); +struct drm_gem_object *gem =drm_gem_object_lookup (filp, mode_cmd.handles[0 ]); - obj =i915_gem_object_lookup (filp, mode_cmd.handles[0 ]); -if (!obj) +if (!gem)return ERR_PTR (-ENOENT ); + obj =to_intel_bo (gem); +#ifdef I915 /* object is backed with LMEM for discrete */ - i915 =to_i915 (obj->base.dev);if (HAS_LMEM (i915) && !i915_gem_object_can_migrate (obj,INTEL_REGION_LMEM_0 )) {/* object is "remote", not in local memory */ i915_gem_object_put (obj);drm_dbg_kms (&i915->drm,"framebuffer must reside in local memory\n" );return ERR_PTR (-EREMOTE ); } +#else +/* Require vram placement or dma-buf import */ +if (XE_IOCTL_DBG (i915,IS_DGFX (i915) && !xe_bo_can_migrate (obj,XE_PL_VRAM0 ) && + obj->ttm.type != ttm_bo_type_sg)) { +drm_gem_object_put (gem); +return ERR_PTR (-EREMOTE ); + } +#endif fb =intel_framebuffer_create (obj, &mode_cmd); -i915_gem_object_put (obj); +drm_gem_object_put (gem);return fb; }
Signature · 1 line
2.39.2
Patchwork
CI[Intel-xe] ✗ CI.Patch_applied: failure for Break up remaining changes to make xe compile.
In reply to Maarten Lankhorst== Series Details ==
== Series Details ==
Series: Break up remaining changes to make xe compile.
URL : https://patchwork.freedesktop.org/series/126200/
State : failure
== Summary ==
=== Applying kernel patches on branch 'drm-xe-next' with base: === Base commit: 2096aea11 fixup! drm/xe/gsc: add gsc device support
=== git am output follows ===
.git/rebase-apply/patch:20: new blank line at EOF.
+
warning: 1 line adds whitespace errors.
Applying: drm/i915: Use drm_atomic_helper_wait_for_fences helper.
Applying: fixup! drm/xe/display: Implement display support
Applying: drm/i915/display: Revert all before remaining changes to make xe compile
Applying: drm/i915/display: Revert remaining changes to make xe compile
Applying: drm/xe: Update headers to be more compatible with i915
Applying: FIXME drm/i915/display: add_dma_resv_fences is i915 only
Applying: drm/i915/display: Use i915_gem_object_get_dma_address to get dma address
Applying: FIXME drm/i915/display: Minimal changes to fbdev to make xe work
Applying: FIXME drm/i915/display: Make intel_fb.c code compatible with xe
Patchwork
CI[Intel-xe] ✗ CI.Patch_applied: failure for Break up remaining changes to make xe compile. (rev2)
In reply to Maarten Lankhorst== Series Details ==
== Series Details ==
Series: Break up remaining changes to make xe compile. (rev2)
URL : https://patchwork.freedesktop.org/series/126200/
State : failure
== Summary ==
=== Applying kernel patches on branch 'drm-xe-next' with base: ===
Base commit: eba8bfb1d fixup! drm/xe/display: Implement display support
=== git am output follows ===
error: patch failed: drivers/gpu/drm/i915/display/intel_fbdev.c:48
error: drivers/gpu/drm/i915/display/intel_fbdev.c: patch does not apply
hint: Use 'git am --show-current-patch' to see the failed patch
Applying: drm/i915: Use drm_atomic_helper_wait_for_fences helper.
Applying: fixup! drm/xe/display: Implement display support
Applying: drm/i915/display: Revert all before remaining changes to make xe compile Patch failed at 0003 drm/i915/display: Revert all before remaining changes to make xe compile When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".
Patchwork
CI[Intel-xe] ✗ CI.Patch_applied: failure for Break up remaining changes to make xe compile. (rev2)
In reply to Maarten Lankhorst== Series Details ==
== Series Details ==
Series: Break up remaining changes to make xe compile. (rev2)
URL : https://patchwork.freedesktop.org/series/126200/
State : failure
== Summary ==
=== Applying kernel patches on branch 'drm-xe-next' with base: ===
Base commit: 3b8183b7e drm/xe/uapi: Be more specific about the vm_bind prefetch region === git am output follows ===
error: patch failed: drivers/gpu/drm/i915/display/intel_fbdev.c:48
error: drivers/gpu/drm/i915/display/intel_fbdev.c: patch does not apply
hint: Use 'git am --show-current-patch' to see the failed patch
Applying: drm/i915: Use drm_atomic_helper_wait_for_fences helper.
Applying: fixup! drm/xe/display: Implement display support
Applying: drm/i915/display: Revert all before remaining changes to make xe compile Patch failed at 0003 drm/i915/display: Revert all before remaining changes to make xe compile When you have resolved this problem, run "git am --continue".
If you prefer to skip this patch, run "git am --skip" instead.
To restore the original branch and stop patching, run "git am --abort".