x86-64: Stack protector and percpu improvements
Subsystems (7)
v3 cover x86-64: Stack protector and percpu improvements
Currently, x86-64 uses an unusual percpu layout, where the percpu section is linked at absolute address 0. The reason behind this is that older GCC versions placed the stack protector (if enabled) at a fixed offset from the GS segment base. Since the GS segement is also used for percpu variables, this forced the current layout.
GCC since version 8.1 supports a configurable location for the stack protector value, which allows removal of the restriction on how the percpu section is linked. This allows the percpu section to be linked normally, like most other architectures. In turn, this allows removal of code that was needed to support the zero-based percpu section.
The major change with this iteration is adding support to objtool for older compilers that can't change the location of the stackprotector canary value.
v3:
- Add objtool suport to convert stackprotector code from older compilers.
- Handle R_X86_64_REX_GOTPCRELX relocations from clang
v2:
- Include PVH boot in GSBASE changes.
- Split out removal of 64-bit test script to give full context on why it's not needed anymore.
- Formatting and comment cleanups.
Brian Gerst (14):
x86/stackprotector/32: Remove stack protector test script x86/stackprotector/64: Remove stack protector test script x86/boot: Disable stack protector for early boot code x86/pvh: Use fixed_percpu_data for early boot GSBASE x86/relocs: Handle R_X86_64_REX_GOTPCRELX relocations
objtool: Allow adding relocations to an existing section
objtool: Convert fixed location stack protector accesses x86/stackprotector/64: Convert to normal percpu variable x86/percpu/64: Use relative percpu offsets x86/percpu/64: Remove fixed_percpu_data x86/boot/64: Remove inverse relocations x86/percpu/64: Remove INIT_PER_CPU macros
percpu: Remove PER_CPU_FIRST_SECTION
kallsyms: Remove KALLSYMS_ABSOLUTE_PERCPU
arch/x86/Kconfig | 16 +-- arch/x86/Makefile | 21 ++-- arch/x86/boot/compressed/misc.c | 14 +-- arch/x86/entry/entry_64.S | 2 +- arch/x86/include/asm/percpu.h | 22 ---- arch/x86/include/asm/processor.h | 28 +---- arch/x86/include/asm/stackprotector.h | 36 +----- arch/x86/kernel/Makefile | 2 + arch/x86/kernel/asm-offsets_64.c | 6 - arch/x86/kernel/cpu/common.c | 8 +- arch/x86/kernel/head_64.S | 20 ++- arch/x86/kernel/irq_64.c | 1 - arch/x86/kernel/setup_percpu.c | 12 +- arch/x86/kernel/vmlinux.lds.S | 35 ------ arch/x86/platform/pvh/head.S | 10 +- arch/x86/tools/relocs.c | 143 ++-------------------- arch/x86/xen/xen-head.S | 10 +- include/asm-generic/vmlinux.lds.h | 1 - include/linux/percpu-defs.h | 12 -- init/Kconfig | 11 +- kernel/kallsyms.c | 12 +- scripts/Makefile.lib | 2 + scripts/gcc-x86_32-has-stack-protector.sh | 8 -- scripts/gcc-x86_64-has-stack-protector.sh | 4 - scripts/kallsyms.c | 80 +++--------- scripts/link-vmlinux.sh | 4 - tools/objtool/arch/x86/decode.c | 46 +++++++ tools/objtool/arch/x86/special.c | 88 +++++++++++++ tools/objtool/builtin-check.c | 9 +- tools/objtool/check.c | 14 ++- tools/objtool/elf.c | 133 ++++++++++++++++---- tools/objtool/include/objtool/arch.h | 3 + tools/objtool/include/objtool/builtin.h | 2 + tools/objtool/include/objtool/elf.h | 90 +++++++++++--- 34 files changed, 433 insertions(+), 472 deletions(-) delete mode 100755 scripts/gcc-x86_32-has-stack-protector.sh delete mode 100755 scripts/gcc-x86_64-has-stack-protector.sh
Signature · 1 line
2.41.0
PATCH v3 1/14 x86/stackprotector/32: Remove stack protector test script
Test for compiler support directly in Kconfig.
--- arch/x86/Kconfig | 2 +- scripts/gcc-x86_32-has-stack-protector.sh | 8 -------- 2 files changed, 1 insertion(+), 9 deletions(-) delete mode 100755 scripts/gcc-x86_32-has-stack-protector.sh
arch/x86/Kconfig +1 -1
@@ -411,7 +411,7 @@ config PGTABLE_LEVELS config CC_HAS_SANE_STACKPROTECTOR bool default $(success,$(srctree)/scripts/gcc-x86_64-has-stack-protector.sh $(CC) $(CLANG_FLAGS)) if 64BIT - default $(success,$(srctree)/scripts/gcc-x86_32-has-stack-protector.sh $(CC) $(CLANG_FLAGS)) + default $(cc-option,-mstack-protector-guard-reg=fs -mstack-protector-guard-symbol=__stack_chk_guard) help We have to make sure stack protector is unconditionally disabled if the compiler produces broken code or if it does not let us control
scripts/gcc-x86_32-has-stack-protector.sh deleted +0 -8
@@ -1,8 +0,0 @@ -#!/bin/sh -# SPDX-License-Identifier: GPL-2.0 - -# This requires GCC 8.1 or better. Specifically, we require -# -mstack-protector-guard-reg, added by -# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81708 - -echo "int foo(void) { char X[200]; return 3; }" | $* -S -x c -c -m32 -O0 -fstack-protector -mstack-protector-guard-reg=fs -mstack-protector-guard-symbol=__stack_chk_guard - -o - 2> /dev/null | grep -q "%fs"
Signature · 1 line
2.41.0
PATCH v3 2/14 x86/stackprotector/64: Remove stack protector test script
In reply to Brian GerstThis test for the stack protector was added in 2006 to make sure the compiler had the PR28281 patch applied. With GCC 5.1 being the minimum supported compiler now, it is no longer necessary.
--- arch/x86/Kconfig | 5 ++--- scripts/gcc-x86_64-has-stack-protector.sh | 4 ---- 2 files changed, 2 insertions(+), 7 deletions(-) delete mode 100755 scripts/gcc-x86_64-has-stack-protector.sh
arch/x86/Kconfig +2 -3
@@ -410,12 +410,11 @@ config PGTABLE_LEVELS config CC_HAS_SANE_STACKPROTECTOR bool - default $(success,$(srctree)/scripts/gcc-x86_64-has-stack-protector.sh $(CC) $(CLANG_FLAGS)) if 64BIT + default y if 64BIT default $(cc-option,-mstack-protector-guard-reg=fs -mstack-protector-guard-symbol=__stack_chk_guard) help We have to make sure stack protector is unconditionally disabled if - the compiler produces broken code or if it does not let us control - the segment on 32-bit kernels. + the compiler does not allow control of the segment and symbol. menu "Processor type and features"
scripts/gcc-x86_64-has-stack-protector.sh deleted +0 -4
@@ -1,4 +0,0 @@ -#!/bin/sh -# SPDX-License-Identifier: GPL-2.0 - -echo "int foo(void) { char X[200]; return 3; }" | $* -S -x c -c -m64 -O0 -mcmodel=kernel -fno-PIE -fstack-protector - -o - 2> /dev/null | grep -q "%gs"
Signature · 1 line
2.41.0
PATCH v3 3/14 x86/boot: Disable stack protector for early boot code
In reply to Brian GerstOn 64-bit, this will prevent crashes when the canary access is changed from %gs:40 to %gs:__stack_chk_guard(%rip). RIP-relative addresses from the identity-mapped early boot code will target the wrong address with zero-based percpu. KASLR could then shift that address to an unmapped page causing a crash on boot.
This early boot code runs well before userspace is active and does not need stack protector enabled.
--- arch/x86/kernel/Makefile | 2 ++ 1 file changed, 2 insertions(+)
arch/x86/kernel/Makefile +2 -0
@@ -39,6 +39,8 @@ KMSAN_SANITIZE_nmi.o := n KCOV_INSTRUMENT_head$(BITS).o := n KCOV_INSTRUMENT_sev.o := n +CFLAGS_head32.o := -fno-stack-protector +CFLAGS_head64.o := -fno-stack-protector CFLAGS_irq.o := -I $(srctree)/$(src)/../include/asm/trace obj-y += head_$(BITS).o
Signature · 1 line
2.41.0
PATCH v3 4/14 x86/pvh: Use fixed_percpu_data for early boot GSBASE
In reply to Brian GerstInstead of having a private area for the stack canary, use fixed_percpu_data for GSBASE like the native kernel.
--- arch/x86/platform/pvh/head.S | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-)
arch/x86/platform/pvh/head.S +8 -5
@@ -94,10 +94,15 @@ SYM_CODE_START_LOCAL(pvh_start_xen) /* 64-bit entry point. */ .code64 1: - /* Set base address in stack canary descriptor. */ + /* + * Set up GSBASE. + * Note that, on SMP, the boot cpu uses init data section until + * the per cpu areas are set up. + */ mov $MSR_GS_BASE,%ecx - mov $_pa(canary), %eax - xor %edx, %edx + lea INIT_PER_CPU_VAR(fixed_percpu_data)(%rip), %rdx + mov %edx, %eax + shr $32, %rdx wrmsr call xen_prepare_pvh
@@ -156,8 +161,6 @@ SYM_DATA_START_LOCAL(gdt_start) SYM_DATA_END_LABEL(gdt_start, SYM_L_LOCAL, gdt_end) .balign 16 -SYM_DATA_LOCAL(canary, .fill 48, 1, 0) - SYM_DATA_START_LOCAL(early_stack) .fill BOOT_STACK_SIZE, 1, 0 SYM_DATA_END_LABEL(early_stack, SYM_L_LOCAL, early_stack_end)
Signature · 1 line
2.41.0
PATCH v3 5/14 x86/relocs: Handle R_X86_64_REX_GOTPCRELX relocations
In reply to Brian GerstClang may produce R_X86_64_REX_GOTPCRELX relocations when redefining the stack protector location. Treat them as another type of PC-relative relocation.
--- arch/x86/tools/relocs.c | 7 +++++++ 1 file changed, 7 insertions(+)
arch/x86/tools/relocs.c +7 -0
@@ -31,6 +31,11 @@ static struct relocs relocs32;static struct relocs relocs32neg;static struct relocs relocs64;#define FMT PRIu64 + +#ifndef R_X86_64_REX_GOTPCRELX +#define R_X86_64_REX_GOTPCRELX 42 +#endif +#else #define FMT PRIu32#endif
@@ -224,6 +229,7 @@ static const char *rel_type(unsigned type)REL_TYPE (R_X86_64_PC16 ),REL_TYPE (R_X86_64_8 ),REL_TYPE (R_X86_64_PC8 ), +REL_TYPE (R_X86_64_REX_GOTPCRELX ), #elseREL_TYPE (R_386_NONE ), REL_TYPE(R_386_32),
@@ -848,6 +854,7 @@ static int do_reloc64(struct section *sec, Elf_Rel *rel, ElfW(Sym) *sym,case R_X86_64_PC32 :case R_X86_64_PLT32 : +case R_X86_64_REX_GOTPCRELX :/* * PC relative relocations don't need to be adjusted unless * referencing a percpu symbol.
Signature · 1 line
2.41.0
PATCH v3 6/14 objtool: Allow adding relocations to an existing section
In reply to Brian GerstIn order to add relocations to existing sections (e.g. ".rela.text"), encapsulate the reloc array in a block header to allow chaining blocks to add more relocs without moving and relinking the existing ones. This adds minimal memory overhead, while still being able to easily access the arrays by index.
--- tools/objtool/check.c | 2 +- tools/objtool/elf.c | 99 +++++++++++++++++++++++------ tools/objtool/include/objtool/elf.h | 84 +++++++++++++++++++----- 3 files changed, 148 insertions(+), 37 deletions(-)
tools/objtool/check.c +1 -1
@@ -4409,7 +4409,7 @@ static int validate_ibt_data_reloc(struct objtool_file *file,return 0 ;WARN_FUNC ("data relocation to !ENDBR: %s" , - reloc->sec->base,reloc_offset (reloc), + reloc->block->sec->base,reloc_offset (reloc),offstr (dest->sec, dest->offset));return 1 ;
tools/objtool/elf.c +80 -19
178 lines not on this page · raw message
tools/objtool/include/objtool/elf.h +67 -17
162 lines not on this page · raw message
Signature · 1 line
2.41.0
PATCH v3 7/14 objtool: Convert fixed location stack protector accesses
In reply to Brian GerstOlder versions of GCC fixed the location of the stack protector canary at %gs:40. Use objtool to convert these accesses to normal percpu accesses to __stack_chk_guard.
--- arch/x86/Kconfig | 4 ++ scripts/Makefile.lib | 2 + tools/objtool/arch/x86/decode.c | 46 +++++++++++++ tools/objtool/arch/x86/special.c | 88 +++++++++++++++++++++++++ tools/objtool/builtin-check.c | 9 ++- tools/objtool/check.c | 12 ++++ tools/objtool/elf.c | 34 ++++++++-- tools/objtool/include/objtool/arch.h | 3 + tools/objtool/include/objtool/builtin.h | 2 + tools/objtool/include/objtool/elf.h | 6 ++ 10 files changed, 201 insertions(+), 5 deletions(-)
arch/x86/Kconfig +4 -0
@@ -416,6 +416,10 @@ config CC_HAS_SANE_STACKPROTECTOR We have to make sure stack protector is unconditionally disabled if the compiler does not allow control of the segment and symbol. +config STACKPROTECTOR_OBJTOOL + bool + default n + menu "Processor type and features" config SMP
scripts/Makefile.lib +2 -0
@@ -255,6 +255,8 @@ objtool := $(objtree)/tools/objtool/objtool objtool-args-$(CONFIG_HAVE_JUMP_LABEL_HACK) += --hacks=jump_label objtool-args-$(CONFIG_HAVE_NOINSTR_HACK) += --hacks=noinstr objtool-args-$(CONFIG_CALL_DEPTH_TRACKING) += --hacks=skylake +objtool-args-$(CONFIG_STACKPROTECTOR_OBJTOOL) += --hacks=stackprotector +objtool-args-$(CONFIG_SMP) += --smp objtool-args-$(CONFIG_X86_KERNEL_IBT) += --ibt objtool-args-$(CONFIG_FINEIBT) += --cfi objtool-args-$(CONFIG_FTRACE_MCOUNT_USE_OBJTOOL) += --mcount
tools/objtool/arch/x86/decode.c +46 -0
62 lines not on this page · raw message
tools/objtool/arch/x86/special.c +88 -0
97 lines not on this page · raw message
tools/objtool/builtin-check.c +8 -1
@@ -62,12 +62,17 @@ static int parse_hacks(const struct option *opt, const char *str, int unset) found = true; } +if (!str ||strstr (str,"stackprotector" )) { + opts.hack_stackprotector = true; + found = true; + } +return found ?0 :-1 ; }static const struct option check_options[] = {OPT_GROUP ("Actions:" ), -OPT_CALLBACK_OPTARG ('h' ,"hacks" ,NULL ,NULL ,"jump_label,noinstr,skylake" ,"patch toolchain bugs/limitations" , parse_hacks), +OPT_CALLBACK_OPTARG ('h' ,"hacks" ,NULL ,NULL ,"jump_label,noinstr,skylake,stackprotector" ,"patch toolchain bugs/limitations" , parse_hacks),OPT_BOOLEAN ('i' ,"ibt" , &opts.ibt,"validate and annotate IBT" ),OPT_BOOLEAN ('m' ,"mcount" , &opts.mcount,"annotate mcount/fentry calls for ftrace" ),OPT_BOOLEAN ('n' ,"noinstr" , &opts.noinstr,"validate noinstr rules" ),
@@ -94,6 +99,7 @@ static const struct option check_options[] = {OPT_BOOLEAN (0 ,"sec-address" , &opts.sec_address,"print section addresses in warnings" ),OPT_BOOLEAN (0 ,"stats" , &opts.stats,"print statistics" ),OPT_BOOLEAN ('v' ,"verbose" , &opts.verbose,"verbose warnings" ), +OPT_BOOLEAN (0 ,"smp" , &opts.smp,"building an SMP kernel" ), OPT_END(), };
@@ -133,6 +139,7 @@ static bool opts_valid(void) { if (opts.hack_jump_label || opts.hack_noinstr || + opts.hack_stackprotector || opts.ibt || opts.mcount || opts.noinstr ||
tools/objtool/check.c +12 -0
@@ -1315,6 +1315,11 @@ __weak bool arch_is_embedded_insn(struct symbol *sym)return false; } +__weak int arch_hack_stackprotector (struct objtool_file *file) +{ +return 0 ; +} +static struct reloc *insn_reloc (struct objtool_file *file,struct instruction *insn) {struct reloc *reloc;
@@ -4812,6 +4817,13 @@ int check(struct objtool_file *file) warnings += ret; } +if (opts.hack_stackprotector) { + ret =arch_hack_stackprotector (file); +if (ret <0 ) + goto out; + warnings += ret; + } +free_insns (file);if (opts.verbose)
tools/objtool/elf.c +30 -4
@@ -846,6 +846,32 @@ elf_create_prefix_symbol(struct elf *elf, struct symbol *orig, long size)return sym; } +struct symbol * +elf_create_undef_symbol (struct elf *elf,const char *sym_name) +{ +struct symbol *sym =calloc (1 ,sizeof (*sym)); +char *name =strdup (sym_name); + +if (!sym || !name) { +perror ("malloc" ); +return NULL ; + } + + sym->name = name; + sym->sec =find_section_by_index (elf,0 ); + + sym->sym.st_name =elf_add_string (elf,NULL , name); + sym->sym.st_info =GELF_ST_INFO (STB_GLOBAL ,STT_NOTYPE ); + sym->sym.st_value =0 ; + sym->sym.st_size =0 ; + + sym =__elf_create_symbol (elf, sym); +if (sym) +elf_add_symbol (elf, sym); + +return sym; +} + static struct reloc *elf_init_reloc(struct elf *elf, struct section *rsec, unsigned int reloc_idx, unsigned long offset, struct symbol *sym,
@@ -924,7 +950,7 @@ struct reloc *elf_init_reloc_data_sym(struct elf *elf, struct section *sec, struct symbol *sym, s64 addend) { -if (sym->sec && (sec->sh.sh_flags &SHF_EXECINSTR )) { +if (sym->sec && (sym->sec->sh.sh_flags &SHF_EXECINSTR )) {WARN ("bad call to %s() for text symbol %s" , __func__, sym->name);return NULL ;
@@ -1196,9 +1222,9 @@ struct section *elf_create_section(struct elf *elf, const char *name,return sec; } -static struct section *elf_create_rela_section (struct elf *elf, -struct section *sec, -unsigned int reloc_nr) +struct section *elf_create_rela_section (struct elf *elf, +struct section *sec, +unsigned int reloc_nr) {struct section *rsec;struct reloc_block *block;
tools/objtool/include/objtool/arch.h +3 -0
@@ -28,6 +28,7 @@ enum insn_type {INSN_CLD ,INSN_TRAP ,INSN_ENDBR , +INSN_STACKPROTECTOR , INSN_OTHER, };
@@ -96,4 +97,6 @@ int arch_rewrite_retpolines(struct objtool_file *file);bool arch_pc_relative_reloc (struct reloc *reloc); +int arch_hack_stackprotector (struct objtool_file *file); +#endif /* _ARCH_H */
tools/objtool/include/objtool/builtin.h +2 -0
@@ -13,6 +13,7 @@ struct opts {bool hack_jump_label;bool hack_noinstr;bool hack_skylake; +bool hack_stackprotector;bool ibt;bool mcount;bool noinstr;
@@ -38,6 +39,7 @@ struct opts {bool sec_address;bool stats;bool verbose; +bool smp; };extern struct opts opts;
tools/objtool/include/objtool/elf.h +6 -0
@@ -120,6 +120,10 @@ struct elf *elf_open_read(const char *name, int flags);struct section *elf_create_section (struct elf *elf,const char *name,size_t entsize,unsigned int nr); +struct section *elf_create_rela_section (struct elf *elf, +struct section *sec, +unsigned int reloc_nr); +int elf_extend_rela_section (struct elf *elf,struct section *rsec,int add_relocs);
@@ -130,6 +134,8 @@ struct section *elf_create_section_pair(struct elf *elf, const char *name,struct symbol *elf_create_prefix_symbol (struct elf *elf,struct symbol *orig,long size); +struct symbol *elf_create_undef_symbol (struct elf *elf,const char *sym_name); + struct reloc *elf_init_reloc_text_sym(struct elf *elf, struct section *sec, unsigned long offset, unsigned int reloc_idx,
Signature · 1 line
2.41.0
PATCH v3 8/14 x86/stackprotector/64: Convert to normal percpu variable
In reply to Brian GerstOlder versions of GCC fixed the location of the stack protector canary at %gs:40. This constraint forced the percpu section to be linked at virtual address 0 so that the canary could be the first data object in the percpu section. Supporting the zero-based percpu section requires additional code to handle relocations for RIP-relative references to percpu data, extra complexity to kallsyms, and workarounds for linker bugs due to the use of absolute symbols.
Use compiler options to redefine the stack protector location if supported, otherwise use objtool. This will remove the contraint that the percpu section must be zero-based.
--- arch/x86/Kconfig | 11 ++++---- arch/x86/Makefile | 21 ++++++++++------ arch/x86/entry/entry_64.S | 2 +- arch/x86/include/asm/processor.h | 16 ++---------- arch/x86/include/asm/stackprotector.h | 36 ++++----------------------- arch/x86/kernel/asm-offsets_64.c | 6 ----- arch/x86/kernel/cpu/common.c | 4 +-- arch/x86/kernel/head_64.S | 3 +-- arch/x86/xen/xen-head.S | 3 +-- 9 files changed, 30 insertions(+), 72 deletions(-)
arch/x86/Kconfig +5 -6
@@ -266,7 +266,7 @@ config X86 select HAVE_FUNCTION_ARG_ACCESS_API select HAVE_SETUP_PER_CPU_AREA select HAVE_SOFTIRQ_ON_OWN_STACK - select HAVE_STACKPROTECTOR if CC_HAS_SANE_STACKPROTECTOR + select HAVE_STACKPROTECTOR if X86_64 || CC_HAS_SANE_STACKPROTECTOR select HAVE_STACK_VALIDATION if HAVE_OBJTOOL select HAVE_STATIC_CALL select HAVE_STATIC_CALL_INLINE if HAVE_OBJTOOL
@@ -410,15 +410,14 @@ config PGTABLE_LEVELS config CC_HAS_SANE_STACKPROTECTOR bool - default y if 64BIT + default $(cc-option,-mstack-protector-guard-reg=gs -mstack-protector-guard-symbol=__stack_chk_guard) if 64BIT default $(cc-option,-mstack-protector-guard-reg=fs -mstack-protector-guard-symbol=__stack_chk_guard) - help - We have to make sure stack protector is unconditionally disabled if - the compiler does not allow control of the segment and symbol. config STACKPROTECTOR_OBJTOOL bool - default n + depends on X86_64 && STACKPROTECTOR + default !CC_HAS_SANE_STACKPROTECTOR + prompt "Debug objtool stack protector conversion" if CC_HAS_SANE_STACKPROTECTOR && DEBUG_KERNEL menu "Processor type and features"
arch/x86/Makefile +14 -7
@@ -112,13 +112,7 @@ ifeq ($(CONFIG_X86_32),y) # temporary until string.h is fixed KBUILD_CFLAGS += -ffreestanding - ifeq ($(CONFIG_STACKPROTECTOR),y) - ifeq ($(CONFIG_SMP),y) - KBUILD_CFLAGS += -mstack-protector-guard-reg=fs -mstack-protector-guard-symbol=__stack_chk_guard - else - KBUILD_CFLAGS += -mstack-protector-guard=global - endif - endif + percpu_seg := fs else BITS := 64 UTS_MACHINE := x86_64
@@ -168,6 +162,19 @@ else KBUILD_CFLAGS += -mcmodel=kernel KBUILD_RUSTFLAGS += -Cno-redzone=y KBUILD_RUSTFLAGS += -Ccode-model=kernel + + percpu_seg := gs +endif + +ifeq ($(CONFIG_STACKPROTECTOR),y) + ifneq ($(CONFIG_STACKPROTECTOR_OBJTOOL),y) + ifeq ($(CONFIG_SMP),y) + KBUILD_CFLAGS += -mstack-protector-guard-reg=$(percpu_seg) + KBUILD_CFLAGS += -mstack-protector-guard-symbol=__stack_chk_guard + else + KBUILD_CFLAGS += -mstack-protector-guard=global + endif + endif endif #
arch/x86/entry/entry_64.S +1 -1
@@ -190,7 +190,7 @@ SYM_FUNC_START(__switch_to_asm) #ifdef CONFIG_STACKPROTECTOR movq TASK_stack_canary(%rsi), %rbx - movq %rbx, PER_CPU_VAR(fixed_percpu_data + FIXED_stack_canary) + movq %rbx, PER_CPU_VAR(__stack_chk_guard) #endif /*
arch/x86/include/asm/processor.h +2 -14
@@ -394,16 +394,8 @@ struct irq_stack {#ifdef CONFIG_X86_64 struct fixed_percpu_data { -/* -* GCC hardcodes the stack canary as %gs:40. Since the -* irq_stack is the object at %gs:0, we reserve the bottom -* 48 bytes of the irq stack for the canary. -* -* Once we are willing to require -mstack-protector-guard-symbol= -* support for x86_64 stackprotector, we can get rid of this. -*/ char gs_base[40 ]; -unsigned long stack_canary; +unsigned long reserved; }; DECLARE_PER_CPU_FIRST(struct fixed_percpu_data, fixed_percpu_data) __visible;
@@ -418,11 +410,7 @@ extern asmlinkage void entry_SYSCALL32_ignore(void);/* Save actual FS/GS selectors and bases to current->thread */ void current_save_fsgs (void ); -#else /* X86_64 */ -#ifdef CONFIG_STACKPROTECTOR -DECLARE_PER_CPU(unsigned long, __stack_chk_guard); -#endif -#endif /* !X86_64 */ +#endif /* X86_64 */ struct perf_event ;
arch/x86/include/asm/stackprotector.h +5 -31
@@ -2,26 +2,10 @@/* * GCC stack protector support. * -* Stack protector works by putting predefined pattern at the start of +* Stack protector works by putting a predefined pattern at the start of * the stack frame and verifying that it hasn't been overwritten when -* returning from the function. The pattern is called stack canary -* and unfortunately gcc historically required it to be at a fixed offset -* from the percpu segment base. On x86_64, the offset is 40 bytes. -* -* The same segment is shared by percpu area and stack canary. On -* x86_64, percpu symbols are zero based and %gs (64-bit) points to the -* base of percpu area. The first occupant of the percpu area is always -* fixed_percpu_data which contains stack_canary at the appropriate -* offset. On x86_32, the stack canary is just a regular percpu -* variable. -* -* Putting percpu data in %fs on 32-bit is a minor optimization compared to -* using %gs. Since 32-bit userspace normally has %fs == 0, we are likely -* to load 0 into %fs on exit to usermode, whereas with percpu data in -* %gs, we are likely to load a non-null %gs on return to user mode. -* -* Once we are willing to require GCC 8.1 or better for 64-bit stackprotector -* support, we can remove some of this complexity. +* returning from the function. The pattern is called the stack canary +* and is a unique value for each task. */ #ifndef _ASM_STACKPROTECTOR_H
@@ -36,6 +20,8 @@#include <linux/sched.h> +DECLARE_PER_CPU(unsigned long, __stack_chk_guard); +/* * Initialize the stackprotector canary value. *
@@ -51,25 +37,13 @@ static __always_inline void boot_init_stack_canary(void) {unsigned long canary =get_random_canary (); -#ifdef CONFIG_X86_64 -BUILD_BUG_ON (offsetof(struct fixed_percpu_data , stack_canary) !=40 ); -#endif - current->stack_canary = canary; -#ifdef CONFIG_X86_64 -this_cpu_write (fixed_percpu_data.stack_canary, canary); -#else this_cpu_write (__stack_chk_guard, canary); -#endif }static inline void cpu_init_stack_canary (int cpu,struct task_struct *idle) { -#ifdef CONFIG_X86_64 -per_cpu (fixed_percpu_data.stack_canary, cpu) = idle->stack_canary; -#else per_cpu (__stack_chk_guard, cpu) = idle->stack_canary; -#endif }#else /* STACKPROTECTOR */
arch/x86/kernel/asm-offsets_64.c +0 -6
@@ -54,11 +54,5 @@ int main(void)BLANK ();#undef ENTRY -BLANK (); - -#ifdef CONFIG_STACKPROTECTOR -OFFSET (FIXED_stack_canary, fixed_percpu_data, stack_canary); -BLANK (); -#endif return 0 ; }
arch/x86/kernel/cpu/common.c +1 -3
@@ -2111,15 +2111,13 @@ void syscall_init(void) X86_EFLAGS_AC|X86_EFLAGS_ID); } -#else /* CONFIG_X86_64 */ +#endif /* CONFIG_X86_64 */ #ifdef CONFIG_STACKPROTECTOR DEFINE_PER_CPU(unsigned long, __stack_chk_guard);EXPORT_PER_CPU_SYMBOL (__stack_chk_guard);#endif -#endif /* CONFIG_X86_64 */ -/* * Clear all 6 debug registers: */
arch/x86/kernel/head_64.S +1 -2
@@ -345,8 +345,7 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL) /* Set up %gs. * - * The base of %gs always points to fixed_percpu_data. If the - * stack protector canary is enabled, it is located at %gs:40. + * The base of %gs always points to fixed_percpu_data. * Note that, on SMP, the boot cpu uses init data section until * the per cpu areas are set up. */
arch/x86/xen/xen-head.S +1 -2
@@ -53,8 +53,7 @@ SYM_CODE_START(startup_xen) /* Set up %gs. * - * The base of %gs always points to fixed_percpu_data. If the - * stack protector canary is enabled, it is located at %gs:40. + * The base of %gs always points to fixed_percpu_data. * Note that, on SMP, the boot cpu uses init data section until * the per cpu areas are set up. */
Signature · 1 line
2.41.0
PATCH v3 9/14 x86/percpu/64: Use relative percpu offsets
In reply to Brian GerstThe percpu section is currently linked at virtual address 0, because older compilers hardcoded the stack protector canary value at a fixed offset from the start of the GS segment. Now that the canary is a normal percpu variable, the percpu section can be linked normally. This means that x86-64 will calculate percpu offsets like most other architectures, as the delta between the initial percpu address and the dynamically allocated memory.
--- arch/x86/include/asm/processor.h | 6 +++++- arch/x86/kernel/head_64.S | 19 +++++++++---------- arch/x86/kernel/setup_percpu.c | 12 ++---------- arch/x86/kernel/vmlinux.lds.S | 29 +---------------------------- arch/x86/platform/pvh/head.S | 5 ++--- arch/x86/tools/relocs.c | 10 +++------- arch/x86/xen/xen-head.S | 9 ++++----- init/Kconfig | 2 +- 8 files changed, 27 insertions(+), 65 deletions(-)
arch/x86/include/asm/processor.h +5 -1
@@ -403,7 +403,11 @@ DECLARE_INIT_PER_CPU(fixed_percpu_data);static inline unsigned long cpu_kernelmode_gs_base (int cpu) { -return (unsigned long )per_cpu (fixed_percpu_data.gs_base, cpu); +#ifdef CONFIG_SMP +return per_cpu_offset (cpu); +#else +return 0 ; +#endif } extern asmlinkage void entry_SYSCALL32_ignore(void);
arch/x86/kernel/head_64.S +9 -10
@@ -70,11 +70,14 @@ SYM_CODE_START_NOALIGN(startup_64) leaq _text(%rip), %rdi - /* Setup GSBASE to allow stack canary access for C code */ + /* + * Set up GSBASE. + * Note that, on SMP, the boot cpu uses init data section until + * the per cpu areas are set up. + */ movl $MSR_GS_BASE, %ecx - leaq INIT_PER_CPU_VAR(fixed_percpu_data)(%rip), %rdx - movl %edx, %eax - shrq $32, %rdx + xorl %eax, %eax + xorl %edx, %edx wrmsr call startup_64_setup_env
@@ -343,16 +346,12 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL) movl %eax,%fs movl %eax,%gs - /* Set up %gs. - * - * The base of %gs always points to fixed_percpu_data. + /* + * Set up GSBASE. * Note that, on SMP, the boot cpu uses init data section until * the per cpu areas are set up. */ movl $MSR_GS_BASE,%ecx -#ifndef CONFIG_SMP - leaq INIT_PER_CPU_VAR(fixed_percpu_data)(%rip), %rdx -#endif movl %edx, %eax shrq $32, %rdx wrmsr
arch/x86/kernel/setup_percpu.c +2 -10
@@ -23,18 +23,10 @@#include <asm/cpumask.h> #include <asm/cpu.h> -#ifdef CONFIG_X86_64 -#define BOOT_PERCPU_OFFSET ((unsigned long)__per_cpu_load) -#else -#define BOOT_PERCPU_OFFSET 0 -#endif - -DEFINE_PER_CPU_READ_MOSTLY(unsigned long, this_cpu_off) = BOOT_PERCPU_OFFSET; +DEFINE_PER_CPU_READ_MOSTLY(unsigned long, this_cpu_off);EXPORT_PER_CPU_SYMBOL (this_cpu_off); -unsigned long __per_cpu_offset[NR_CPUS ]__ro_after_init = { - [0 ...NR_CPUS -1 ] =BOOT_PERCPU_OFFSET , -}; +unsigned long __per_cpu_offset[NR_CPUS ]__ro_after_init ;EXPORT_SYMBOL (__per_cpu_offset);/*
arch/x86/kernel/vmlinux.lds.S +1 -28
@@ -103,12 +103,6 @@ const_pcpu_hot = pcpu_hot; PHDRS { text PT_LOAD FLAGS(5); /* R_E */ data PT_LOAD FLAGS(6); /* RW_ */ -#ifdef CONFIG_X86_64 -#ifdef CONFIG_SMP - percpu PT_LOAD FLAGS(6); /* RW_ */ -#endif - init PT_LOAD FLAGS(7); /* RWE */ -#endif note PT_NOTE FLAGS(0); /* ___ */ }
@@ -224,21 +218,7 @@ SECTIONS __init_begin = .; /* paired with __init_end */ } -#if defined(CONFIG_X86_64) && defined(CONFIG_SMP) - /* - * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the - * output PHDR, so the next output section - .init.text - should - * start another segment - init. - */ - PERCPU_VADDR(INTERNODE_CACHE_BYTES, 0, :percpu) - ASSERT(SIZEOF(.data..percpu) < CONFIG_PHYSICAL_START, - "per-CPU data too large - increase CONFIG_PHYSICAL_START") -#endif - INIT_TEXT_SECTION(PAGE_SIZE) -#ifdef CONFIG_X86_64 - :init -#endif /* * Section for code used exclusively before alternatives are run. All
@@ -368,9 +348,7 @@ SECTIONS EXIT_DATA } -#if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP) PERCPU_SECTION(INTERNODE_CACHE_BYTES) -#endif . = ALIGN(PAGE_SIZE);
@@ -508,16 +486,11 @@ SECTIONS * Per-cpu symbols which need to be offset from __per_cpu_load * for the boot processor. */ -#define INIT_PER_CPU(x) init_per_cpu__##x = ABSOLUTE(x) + __per_cpu_load +#define INIT_PER_CPU(x) init_per_cpu__##x = ABSOLUTE(x) INIT_PER_CPU(gdt_page); INIT_PER_CPU(fixed_percpu_data); INIT_PER_CPU(irq_stack_backing_store); -#ifdef CONFIG_SMP -. = ASSERT((fixed_percpu_data == 0), - "fixed_percpu_data is not at start of per-cpu area"); -#endif - #ifdef CONFIG_CPU_UNRET_ENTRY . = ASSERT((retbleed_return_thunk & 0x3f) == 0, "retbleed_return_thunk not cacheline-aligned"); #endif
arch/x86/platform/pvh/head.S +2 -3
@@ -100,9 +100,8 @@ SYM_CODE_START_LOCAL(pvh_start_xen) * the per cpu areas are set up. */ mov $MSR_GS_BASE,%ecx - lea INIT_PER_CPU_VAR(fixed_percpu_data)(%rip), %rdx - mov %edx, %eax - shr $32, %rdx + xor %eax, %eax + xor %edx, %edx wrmsr call xen_prepare_pvh
arch/x86/tools/relocs.c +3 -7
@@ -822,12 +822,7 @@ static void percpu_init(void)*/ static int is_percpu_sym (ElfW (Sym) *sym,const char *symname) { -int shndx =sym_index (sym); - -return (shndx == per_cpu_shndx) && -strcmp (symname,"__init_begin" ) && -strcmp (symname,"__per_cpu_load" ) && -strncmp (symname,"init_per_cpu_" ,13 ); +return 0 ; }
@@ -1051,7 +1046,8 @@ static int cmp_relocs(const void *va, const void *vb)static void sort_relocs (struct relocs *r) { -qsort (r->offset, r->count,sizeof (r->offset[0 ]), cmp_relocs); +if (r->count) +qsort (r->offset, r->count,sizeof (r->offset[0 ]), cmp_relocs); }static int write32 (uint32_t v,FILE *f)
arch/x86/xen/xen-head.S +4 -5
@@ -51,15 +51,14 @@ SYM_CODE_START(startup_xen) leaq (__end_init_task - PTREGS_SIZE)(%rip), %rsp - /* Set up %gs. - * - * The base of %gs always points to fixed_percpu_data. + /* + * Set up GSBASE. * Note that, on SMP, the boot cpu uses init data section until * the per cpu areas are set up. */ movl $MSR_GS_BASE,%ecx - movq $INIT_PER_CPU_VAR(fixed_percpu_data),%rax - cdq + xorl %eax, %eax + xorl %edx, %edx wrmsr mov %rsi, %rdi
init/Kconfig +1 -1
@@ -1718,7 +1718,7 @@ config KALLSYMS_ALL config KALLSYMS_ABSOLUTE_PERCPU bool depends on KALLSYMS - default X86_64 && SMP + default n config KALLSYMS_BASE_RELATIVE bool
Signature · 1 line
2.41.0
PATCH v3 10/14 x86/percpu/64: Remove fixed_percpu_data
In reply to Brian GerstNow that the stack protector canary value is a normal percpu variable, fixed_percpu_data is unused and can be removed.
--- arch/x86/include/asm/processor.h | 8 -------- arch/x86/kernel/cpu/common.c | 4 ---- arch/x86/kernel/vmlinux.lds.S | 1 - arch/x86/tools/relocs.c | 1 - 4 files changed, 14 deletions(-)
arch/x86/include/asm/processor.h +0 -8
@@ -393,14 +393,6 @@ struct irq_stack { }__aligned(IRQ_STACK_SIZE) ;#ifdef CONFIG_X86_64 -struct fixed_percpu_data { -char gs_base[40 ]; -unsigned long reserved; -}; - -DECLARE_PER_CPU_FIRST(struct fixed_percpu_data, fixed_percpu_data) __visible; -DECLARE_INIT_PER_CPU (fixed_percpu_data); -static inline unsigned long cpu_kernelmode_gs_base (int cpu) {#ifdef CONFIG_SMP
arch/x86/kernel/cpu/common.c +0 -4
@@ -2059,10 +2059,6 @@ EXPORT_PER_CPU_SYMBOL(pcpu_hot);EXPORT_PER_CPU_SYMBOL (const_pcpu_hot);#ifdef CONFIG_X86_64 -DEFINE_PER_CPU_FIRST(struct fixed_percpu_data, - fixed_percpu_data)__aligned(PAGE_SIZE) __visible; -EXPORT_PER_CPU_SYMBOL_GPL (fixed_percpu_data); -static void wrmsrl_cstar (unsigned long val) {/*
arch/x86/kernel/vmlinux.lds.S +0 -1
@@ -488,7 +488,6 @@ SECTIONS */ #define INIT_PER_CPU(x) init_per_cpu__##x = ABSOLUTE(x) INIT_PER_CPU(gdt_page); -INIT_PER_CPU(fixed_percpu_data); INIT_PER_CPU(irq_stack_backing_store); #ifdef CONFIG_CPU_UNRET_ENTRY
arch/x86/tools/relocs.c +0 -1
@@ -817,7 +817,6 @@ static void percpu_init(void)* __per_cpu_load * * The "gold" linker incorrectly associates: -* init_per_cpu__fixed_percpu_data * init_per_cpu__gdt_page */ static int is_percpu_sym (ElfW (Sym) *sym,const char *symname)
Signature · 1 line
2.41.0
PATCH v3 11/14 x86/boot/64: Remove inverse relocations
In reply to Brian GerstNow that the percpu section is not at a fixed virtual address, inverse relocations, which were needed to offset the effects of relocation on RIP-relative percpu references, are no longer needed.
--- arch/x86/boot/compressed/misc.c | 14 +--- arch/x86/tools/relocs.c | 126 +------------------------------- 2 files changed, 2 insertions(+), 138 deletions(-)
arch/x86/boot/compressed/misc.c +1 -13
@@ -221,7 +221,7 @@ static void handle_relocations(void *output, unsigned long output_len,/* * Process relocations: 32 bit relocations first then 64 bit after. -* Three sets of binary relocations are added to the end of the kernel +* Two sets of binary relocations are added to the end of the kernel * before compression. Each relocation table entry is the kernel * address of the location which needs to be updated stored as a * 32-bit value which is sign extended to 64 bits.
@@ -231,8 +231,6 @@ static void handle_relocations(void *output, unsigned long output_len,* kernel bits... * 0 - zero terminator for 64 bit relocations * 64 bit relocation repeated -* 0 - zero terminator for inverse 32 bit relocations -* 32 bit inverse relocation repeated * 0 - zero terminator for 32 bit relocations * 32 bit relocation repeated *
@@ -249,16 +247,6 @@ static void handle_relocations(void *output, unsigned long output_len, *(uint32_t *)ptr += delta; }#ifdef CONFIG_X86_64 -while (*--reloc) { -long extended = *reloc; - extended += map; - - ptr = (unsigned long )extended; -if (ptr < min_addr || ptr > max_addr) -error ("inverse 32-bit relocation outside of kernel!\n" ); - - *(int32_t *)ptr -= delta; - }for (reloc--; *reloc; reloc--) {long extended = *reloc; extended += map;
arch/x86/tools/relocs.c +1 -125
196 lines not on this page · raw message
Signature · 1 line
2.41.0
PATCH v3 12/14 x86/percpu/64: Remove INIT_PER_CPU macros
In reply to Brian GerstThe load and link addresses of percpu variables are now the same, so these macros are no longer necessary.
--- arch/x86/include/asm/percpu.h | 22 ---------------------- arch/x86/kernel/irq_64.c | 1 - arch/x86/kernel/vmlinux.lds.S | 7 ------- arch/x86/tools/relocs.c | 1 - 4 files changed, 31 deletions(-)
arch/x86/include/asm/percpu.h +0 -22
@@ -20,12 +20,6 @@#define PER_CPU_VAR (var) __percpu(var)__percpu_rel -#ifdef CONFIG_X86_64_SMP -#define INIT_PER_CPU_VAR (var) init_per_cpu__##var -#else -#define INIT_PER_CPU_VAR (var) var -#endif -#else /* ...!ASSEMBLY */ #include <linux/kernel.h>
@@ -96,22 +90,6 @@#define __percpu_arg (x) __percpu_prefix "%" #x#define __force_percpu_arg (x) __force_percpu_prefix "%" #x -/* -* Initialized pointers to per-cpu variables needed for the boot -* processor need to use these macros to get the proper address -* offset from __per_cpu_load on SMP. -* -* There also must be an entry in vmlinux_64.lds.S -*/ -#define DECLARE_INIT_PER_CPU (var) \ - extern typeof(var) init_per_cpu_var(var) - -#ifdef CONFIG_X86_64_SMP -#define init_per_cpu_var (var) init_per_cpu__##var -#else -#define init_per_cpu_var (var) var -#endif -/* For arch-specific code, we can use direct single-insn ops (they * don't give an lvalue though). */
arch/x86/kernel/irq_64.c +0 -1
@@ -26,7 +26,6 @@#include <asm/apic.h> DEFINE_PER_CPU_PAGE_ALIGNED(struct irq_stack, irq_stack_backing_store) __visible; -DECLARE_INIT_PER_CPU (irq_stack_backing_store);#ifdef CONFIG_VMAP_STACK /*
arch/x86/kernel/vmlinux.lds.S +0 -7
@@ -482,13 +482,6 @@ SECTIONS "kernel image bigger than KERNEL_IMAGE_SIZE"); #ifdef CONFIG_X86_64 -/* - * Per-cpu symbols which need to be offset from __per_cpu_load - * for the boot processor. - */ -#define INIT_PER_CPU(x) init_per_cpu__##x = ABSOLUTE(x) -INIT_PER_CPU(gdt_page); -INIT_PER_CPU(irq_stack_backing_store); #ifdef CONFIG_CPU_UNRET_ENTRY . = ASSERT((retbleed_return_thunk & 0x3f) == 0, "retbleed_return_thunk not cacheline-aligned");
arch/x86/tools/relocs.c +0 -1
@@ -88,7 +88,6 @@ static const char * const sym_regex_kernel[S_NSYMTYPES] = {"__initramfs_start|" "(jiffies|jiffies_64)|"#if ELF_BITS ==64 -"init_per_cpu__.*|" "__end_rodata_hpage_align|"#endif "__vvar_page|"
Signature · 1 line
2.41.0
PATCH v3 13/14 percpu: Remove PER_CPU_FIRST_SECTION
In reply to Brian Gerstx86-64 was the only user.
--- include/asm-generic/vmlinux.lds.h | 1 - include/linux/percpu-defs.h | 12 ------------ 2 files changed, 13 deletions(-)
include/asm-generic/vmlinux.lds.h +0 -1
@@ -1026,7 +1026,6 @@*/ #define PERCPU_INPUT (cacheline) \ __per_cpu_start = .; \ - *(.data..percpu..first) \ . = ALIGN(PAGE_SIZE); \ *(.data..percpu..page_aligned) \ . = ALIGN(cacheline); \
include/linux/percpu-defs.h +0 -12
@@ -26,13 +26,11 @@#define PER_CPU_SHARED_ALIGNED_SECTION "..shared_aligned"#define PER_CPU_ALIGNED_SECTION "..shared_aligned"#endif -#define PER_CPU_FIRST_SECTION "..first"#else #define PER_CPU_SHARED_ALIGNED_SECTION ""#define PER_CPU_ALIGNED_SECTION "..shared_aligned" -#define PER_CPU_FIRST_SECTION ""#endif
@@ -114,16 +112,6 @@#define DEFINE_PER_CPU (type, name) \ DEFINE_PER_CPU_SECTION(type, name, "") -/* -* Declaration/definition used for per-CPU variables that must come first in -* the set of variables. -*/ -#define DECLARE_PER_CPU_FIRST (type, name) \ - DECLARE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION) - -#define DEFINE_PER_CPU_FIRST (type, name) \ - DEFINE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION) -/* * Declaration/definition used for per-CPU variables that must be cacheline * aligned under SMP conditions so that, whilst a particular instance of the
Signature · 1 line
2.41.0
PATCH v3 14/14 kallsyms: Remove KALLSYMS_ABSOLUTE_PERCPU
In reply to Brian Gerstx86-64 was the only user.
--- init/Kconfig | 11 +----- kernel/kallsyms.c | 12 ++----- scripts/kallsyms.c | 80 ++++++++--------------------------------- scripts/link-vmlinux.sh | 4 --- 4 files changed, 18 insertions(+), 89 deletions(-)
init/Kconfig +1 -10
@@ -1715,11 +1715,6 @@ config KALLSYMS_ALL Say N unless you really need all symbols, or kernel live patching. -config KALLSYMS_ABSOLUTE_PERCPU - bool - depends on KALLSYMS - default n - config KALLSYMS_BASE_RELATIVE bool depends on KALLSYMS
@@ -1727,11 +1722,7 @@ config KALLSYMS_BASE_RELATIVE help Instead of emitting them as absolute values in the native word size, emit the symbol references in the kallsyms table as 32-bit entries, - each containing a relative value in the range [base, base + U32_MAX] - or, when KALLSYMS_ABSOLUTE_PERCPU is in effect, each containing either - an absolute value in the range [0, S32_MAX] or a relative value in the - range [base, base + S32_MAX], where base is the lowest relative symbol - address encountered in the image. + each containing a relative value in the range [base, base + U32_MAX]. On 64-bit builds, this reduces the size of the address table by 50%, but more importantly, it results in entries whose values are build
kernel/kallsyms.c +2 -10
@@ -151,16 +151,8 @@ unsigned long kallsyms_sym_address(int idx)if (!IS_ENABLED (CONFIG_KALLSYMS_BASE_RELATIVE ))return kallsyms_addresses[idx]; -/* values are unsigned offsets if --absolute-percpu is not in effect */ -if (!IS_ENABLED (CONFIG_KALLSYMS_ABSOLUTE_PERCPU )) -return kallsyms_relative_base + (u32 )kallsyms_offsets[idx]; - -/* ...otherwise, positive offsets are absolute values */ -if (kallsyms_offsets[idx] >=0 ) -return kallsyms_offsets[idx]; - -/* ...and negative offsets are relative to kallsyms_relative_base - 1 */ -return kallsyms_relative_base -1 - kallsyms_offsets[idx]; +/* values are unsigned offsets */ +return kallsyms_relative_base + (u32 )kallsyms_offsets[idx]; }static void cleanup_symbol_name (char *s)
scripts/kallsyms.c +15 -65
157 lines not on this page · raw message
scripts/link-vmlinux.sh +0 -4
@@ -148,10 +148,6 @@ kallsyms() kallsymopt="${kallsymopt} --all-symbols" fi - if is_enabled CONFIG_KALLSYMS_ABSOLUTE_PERCPU; then - kallsymopt="${kallsymopt} --absolute-percpu" - fi - if is_enabled CONFIG_KALLSYMS_BASE_RELATIVE; then kallsymopt="${kallsymopt} --base-relative" fi
Signature · 1 line
2.41.0