Add FBC support to PSR/PSR2 tests
cover Add FBC support to PSR/PSR2 tests
Jeevan B (2):
tests/intel/kms_psr: Add FBC support to PSR/PSR2 tests tests/intel/kms_psr2_sf: Add FBC support to PSR2 tests
lib/igt_psr.h | 5 + tests/intel/kms_psr.c | 238 +++++++++------- tests/intel/kms_psr2_sf.c | 567 ++++++++++++++++++++------------------ 3 files changed, 435 insertions(+), 375 deletions(-)
Signature · 1 line
2.25.1
PATCH 1/2 tests/intel/kms_psr: Add FBC support to PSR/PSR2 tests
For intel_display_ver 20, FBC can be enabled along with PSR/PSR2, thereby adding FBC checks to validate this scenario.
--- lib/igt_psr.h | 5 + tests/intel/kms_psr.c | 238 ++++++++++++++++++++++++------------------ 2 files changed, 139 insertions(+), 104 deletions(-)
lib/igt_psr.h +5 -0
@@ -40,6 +40,11 @@ enum psr_mode { PSR_DISABLED, }; +enum fbc_mode { +FBC_ENABLED , +FBC_DISABLED , +}; +bool psr_disabled_check (int debugfs_fd);bool psr2_selective_fetch_check (int debugfs_fd);bool psr_wait_entry (int debugfs_fd,enum psr_mode mode,igt_output_t *output);
tests/intel/kms_psr.c +134 -104
326 lines not on this page · raw message
Signature · 1 line
2.25.1
Re: [igt-dev] [PATCH i-g-t 1/2] tests/intel/kms_psr: Add FBC support to PSR/PSR2 tests
Hi Jeevan,
Quoted 1 line · Jeevan B
For
intel_display_ver20, FBC can be enabled along with PSR/PSR2,
----------------------- ^
Could you write here (maybe in braces) platfrom name? Or maybe other way around, something like:
For LunarLake (intel_display_ver 20) FBC can be enabled ... rest of description
Quoted 45 lines
thereby adding FBC checks to validate this scenario.
Signed-off-by Jeevan B <[email protected]>--- lib/igt_psr.h | 5 + tests/intel/kms_psr.c | 238 ++++++++++++++++++++++++------------------ 2 files changed, 139 insertions(+), 104 deletions(-)lib/igt_psr.h +5
-0@@ -40,6 +40,11 @@ enum psr_mode { PSR_DISABLED, }; +enum fbc_mode { +FBC_ENABLED , +FBC_DISABLED , +}; +bool psr_disabled_check (int debugfs_fd);bool psr2_selective_fetch_check (int debugfs_fd);bool psr_wait_entry (int debugfs_fd,enum psr_mode mode,igt_output_t *output);tests/intel/kms_psr.c +2
-0@@ -31,6 +31,7 @@#include "igt.h" #include "igt_sysfs.h" #include "igt_psr.h" +#include "i915/intel_fbc.h" #include <errno.h> #include <stdbool.h> #include <stdio.h> @@ -366,6 +367,7 @@ typedef struct {enum operations op;int test_plane_id;enum psr_mode op_psr_mode; +enum fbc_mode op_fbc_mode;uint32_t devid;uint32_t crtc_id;igt_display_t display;
tests/intel/kms_psr.c typedef struct { · line 382
Quoted 5 lines
tests/intel/kms_psr.c +1
-0@@ -376,6 +378,7 @@ typedef struct {int mod_stride;drmModeModeInfo *mode;igt_output_t *output; +bool fbc_flag; } data_t;
You are missing documentation for new tests, see GitLab warning:
build:tests-debian-meson has failed (https://gitlab.freedesktop.org/gfx-ci/igt-ci-tags/-/jobs/52046443):
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_blt
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_mmap_cpu
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_mmap_gtt
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_page_flip
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_render
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_blt
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_mmap_cpu
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_mmap_gtt
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_plane_move
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_plane_onoff
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_render
Warning: Missing documentation for igt@kms_psr@fbc_psr_suspend
After recent changes such documentation should be at beginning of test.
Quoted 20 lines
tests/intel/kms_psr.c +6
-1static void create_cursor_fb (data_t *data)@@ -782,6 +785,11 @@ static void test_setup(data_t *data)igt_require_f (data->output,"No available output found\n" ); +if (data->fbc_flag) +igt_assert_f (intel_fbc_wait_until_enabled (data->drm_fd, + pipe), +"FBC still disabled" ); + pipe =get_pipe_for_output (&data->display, data->output);igt_output_set_pipe (data->output, pipe); igt_require_f(intel_pipe_output_combo_valid(&data->display),@@ -819,14 +827,20 @@ data_t data = {}; igt_main { -int z; +int z, y;
tests/intel/kms_psr.c data_t data = {}; · line 840
Quoted 10 lines
tests/intel/kms_psr.c +4
-0enum operations op; +enum pipe pipe;const char *append_subtest_name[3 ] = {"psr_" ,"psr2_" ,"pr_" }; +const char *append_fbc_subtest[2 ] = { +"" , +"fbc_"
----------- ^
Looks like this is breaking convetion for (sub)tests name:
very-long-subtest-name, now it is very_long_subtest_name.
Was it intended? +cc Swati, Bhanu and Juha-Pekka.
Regards,
Kamil
Quoted 286 lines
tests/intel/kms_psr.c +121
-103+ };int modes[] = {PSR_MODE_1 ,PSR_MODE_2 ,PR_MODE }; +int fbc_status[] = {FBC_DISABLED ,FBC_ENABLED };igt_output_t *output; igt_fixture {@@ -837,52 +851,41 @@ igt_main data.bops =buf_ops_create (data.drm_fd);igt_display_require (&data.display, data.drm_fd);igt_require_f (output_supports_psr (&data),"Sink does not support PSR/PSR2/PR\n" ); - } - -for (z =0 ; z <ARRAY_SIZE (modes); z++) { - data.op_psr_mode = modes[z]; - -igt_describe ("Basic check for psr if it is detecting changes made in planes" ); - igt_subtest_with_dynamic_f("%sbasic", append_subtest_name[z]) { -for_each_connected_output (&data.display, output) { -if (!psr_sink_support (data.drm_fd, data.debugfs_fd, - data.op_psr_mode, output)) -continue ; -igt_display_reset (&data.display); - data.output = output; - igt_dynamic_f("%s", data.output->name) { - data.test_plane_id =DRM_PLANE_TYPE_PRIMARY ; -test_setup (&data); -test_cleanup (&data); - } - } +if ((intel_display_ver (intel_get_drm_devid (data.drm_fd) ==20 )) && + (intel_fbc_supported_on_chipset (data.drm_fd, pipe))) { + data.fbc_flag = true; } -igt_describe ("Check if psr is detecting changes when drrs is disabled" ); - igt_subtest_with_dynamic_f("%sno_drrs", append_subtest_name[z]) { -for_each_connected_output (&data.display, output) { -if (!psr_sink_support (data.drm_fd, data.debugfs_fd, - data.op_psr_mode, output)) -continue ; -igt_display_reset (&data.display); - data.output = output; - igt_dynamic_f("%s", data.output->name) { - data.test_plane_id =DRM_PLANE_TYPE_PRIMARY ; -test_setup (&data); -igt_assert (drrs_disabled (&data)); -test_cleanup (&data); + } + +for (y =0 ; y <ARRAY_SIZE (fbc_status); y++) { + data.op_fbc_mode = fbc_status[y]; +if (data.op_fbc_mode ==FBC_DISABLED ) + data.fbc_flag = false; +for (z =0 ; z <ARRAY_SIZE (modes); z++) { + data.op_psr_mode = modes[z]; + +igt_describe ("Basic check for psr if it is detecting changes made " +"in planes" ); +igt_subtest_with_dynamic_f ("%s%sbasic" , append_fbc_subtest[y], + append_subtest_name[z]) { +for_each_connected_output (&data.display, output) { +if (!psr_sink_support (data.drm_fd, data.debugfs_fd, + data.op_psr_mode, output)) +continue ; +igt_display_reset (&data.display); + data.output = output; + igt_dynamic_f("%s", data.output->name) { + data.test_plane_id =DRM_PLANE_TYPE_PRIMARY ; +test_setup (&data); +test_cleanup (&data); + } } } - } -for (op =PAGE_FLIP ; op <=RENDER ; op++) { -igt_describe ("Check if psr is detecting page-flipping,memory mapping and " -"rendering operations performed on primary planes" ); -igt_subtest_with_dynamic_f ("%sprimary_%s" , - append_subtest_name[z], - op_str(op)) { -igt_skip_on (is_xe_device (data.drm_fd) && - (op ==MMAP_CPU || op ==MMAP_GTT )); +igt_describe ("Check if psr is detecting changes when drrs is disabled" ); +igt_subtest_with_dynamic_f ("%s%sno_drrs" , append_fbc_subtest[y], + append_subtest_name[z]) {for_each_connected_output (&data.display, output) {if (!psr_sink_support (data.drm_fd, data.debugfs_fd, data.op_psr_mode, output))@@ -890,24 +893,90 @@ igt_mainigt_display_reset (&data.display); data.output = output; igt_dynamic_f("%s", data.output->name) { - data.op = op; data.test_plane_id =DRM_PLANE_TYPE_PRIMARY ;test_setup (&data); -run_test (&data); +igt_assert (drrs_disabled (&data));test_cleanup (&data); } } } - } -for (op =MMAP_GTT ; op <=PLANE_ONOFF ; op++) { -igt_describe ("Check if psr is detecting memory mapping,rendering " -"and plane operations performed on sprite planes" ); -igt_subtest_with_dynamic_f ("%ssprite_%s" , - append_subtest_name[z], - op_str(op)) { -igt_skip_on (is_xe_device (data.drm_fd) && - (op ==MMAP_CPU || op ==MMAP_GTT )); +for (op =PAGE_FLIP ; op <=RENDER ; op++) { +igt_describe ("Check if psr is detecting page-flipping,memory " +"mapping and rendering operations performed on " +"primary planes" ); +igt_subtest_with_dynamic_f ("%s%sprimary_%s" , append_fbc_subtest[y], + append_subtest_name[z], op_str(op)) { +igt_skip_on (is_xe_device (data.drm_fd) && + (op ==MMAP_CPU || op ==MMAP_GTT )); +for_each_connected_output (&data.display, output) { +if (!psr_sink_support (data.drm_fd, data.debugfs_fd, + data.op_psr_mode, output)) +continue ; +igt_display_reset (&data.display); + data.output = output; + igt_dynamic_f("%s", data.output->name) { + data.op = op; + data.test_plane_id =DRM_PLANE_TYPE_PRIMARY ; +test_setup (&data); +run_test (&data); +test_cleanup (&data); + } + } + } + } + +for (op =MMAP_GTT ; op <=PLANE_ONOFF ; op++) { +igt_describe ("Check if psr is detecting memory mapping,rendering " +"and plane operations performed on sprite planes" ); +igt_subtest_with_dynamic_f ("%s%ssprite_%s" , append_fbc_subtest[y], + append_subtest_name[z], + op_str(op)) { +igt_skip_on (is_xe_device (data.drm_fd) && + (op ==MMAP_CPU || op ==MMAP_GTT )); +for_each_connected_output (&data.display, output) { +if (!psr_sink_support (data.drm_fd, data.debugfs_fd, + data.op_psr_mode, output)) +continue ; +igt_display_reset (&data.display); + data.output = output; + igt_dynamic_f("%s", data.output->name) { + data.op = op; + data.test_plane_id =DRM_PLANE_TYPE_OVERLAY ; +test_setup (&data); +run_test (&data); +test_cleanup (&data); + } + } + } + +igt_describe ("Check if psr is detecting memory mapping, rendering " +"and plane operations performed on cursor planes" ); +igt_subtest_with_dynamic_f ("%s%scursor_%s" , append_fbc_subtest[y], + append_subtest_name[z], + op_str(op)) { +igt_skip_on (is_xe_device (data.drm_fd) && + (op ==MMAP_CPU || op ==MMAP_GTT )); +for_each_connected_output (&data.display, output) { +if (!psr_sink_support (data.drm_fd, data.debugfs_fd, + data.op_psr_mode, output)) +continue ; +igt_display_reset (&data.display); + data.output = output; + igt_dynamic_f("%s", data.output->name) { + data.test_plane_id =DRM_PLANE_TYPE_CURSOR ; +test_setup (&data); +run_test (&data); +test_cleanup (&data); + } + } + } + } + +igt_describe ("Check if psr is detecting changes when rendering operation " +"is performed with dpms enabled or disabled" ); +igt_subtest_with_dynamic_f ("%s%sdpms" , append_fbc_subtest[y], + append_subtest_name[z]) {for_each_connected_output (&data.display, output) {if (!psr_sink_support (data.drm_fd, data.debugfs_fd, data.op_psr_mode, output))@@ -915,22 +984,21 @@ igt_mainigt_display_reset (&data.display); data.output = output; igt_dynamic_f("%s", data.output->name) { - data.op = op; - data.test_plane_id =DRM_PLANE_TYPE_OVERLAY ; + data.op =igt_get_render_copyfunc (data.devid) ? +RENDER :BLT ; + data.test_plane_id =DRM_PLANE_TYPE_PRIMARY ;test_setup (&data); +dpms_off_on (&data);run_test (&data);test_cleanup (&data); } } } -igt_describe ("Check if psr is detecting memory mapping, rendering " -"and plane operations performed on cursor planes" ); -igt_subtest_with_dynamic_f ("%scursor_%s" , - append_subtest_name[z], - op_str(op)) { -igt_skip_on (is_xe_device (data.drm_fd) && - (op ==MMAP_CPU || op ==MMAP_GTT )); +igt_describe ("Check if psr is detecting changes when plane operation is " +"performed with suspend resume cycles" ); +igt_subtest_with_dynamic_f ("%s%ssuspend" , append_fbc_subtest[y], + append_subtest_name[z]) {for_each_connected_output (&data.display, output) {if (!psr_sink_support (data.drm_fd, data.debugfs_fd, data.op_psr_mode, output))@@ -938,56 +1006,18 @@ igt_mainigt_display_reset (&data.display); data.output = output; igt_dynamic_f("%s", data.output->name) { + data.op =PLANE_ONOFF ; data.test_plane_id =DRM_PLANE_TYPE_CURSOR ;test_setup (&data); +igt_system_suspend_autoresume (SUSPEND_STATE_MEM , +SUSPEND_TEST_NONE ); +igt_assert (psr_wait_entry_if_enabled (&data));run_test (&data);test_cleanup (&data); } } } } - -igt_describe ("Check if psr is detecting changes when rendering operation is performed" -" with dpms enabled or disabled" ); - igt_subtest_with_dynamic_f("%sdpms", append_subtest_name[z]) { -for_each_connected_output (&data.display, output) { -if (!psr_sink_support (data.drm_fd, data.debugfs_fd, - data.op_psr_mode, output)) -continue ; -igt_display_reset (&data.display); - data.output = output; - igt_dynamic_f("%s", data.output->name) { - data.op =igt_get_render_copyfunc (data.devid) ?RENDER :BLT ; - data.test_plane_id =DRM_PLANE_TYPE_PRIMARY ; -test_setup (&data); -dpms_off_on (&data); -run_test (&data); -test_cleanup (&data); - } - } - } - -igt_describe ("Check if psr is detecting changes when plane operation is performed " -"with suspend resume cycles" ); - igt_subtest_with_dynamic_f("%ssuspend", append_subtest_name[z]) { -for_each_connected_output (&data.display, output) { -if (!psr_sink_support (data.drm_fd, data.debugfs_fd, - data.op_psr_mode, output)) -continue ; -igt_display_reset (&data.display); - data.output = output; - igt_dynamic_f("%s", data.output->name) { - data.op =PLANE_ONOFF ; - data.test_plane_id =DRM_PLANE_TYPE_CURSOR ; -test_setup (&data); -igt_system_suspend_autoresume (SUSPEND_STATE_MEM , -SUSPEND_TEST_NONE ); -igt_assert (psr_wait_entry_if_enabled (&data)); -run_test (&data); -test_cleanup (&data); - } - } - } } igt_fixture {Signature · 1 line
2.25.1
PATCH 2/2 tests/intel/kms_psr2_sf: Add FBC support to PSR2 tests
In reply to Jeevan BFor intel_display_ver 20, FBC can be enabled along with PSR2, thereby adding FBC checks to validate this scenario.
--- tests/intel/kms_psr2_sf.c | 567 ++++++++++++++++++++------------------ 1 file changed, 296 insertions(+), 271 deletions(-)
tests/intel/kms_psr2_sf.c +296 -271
@@ -26,6 +26,7 @@#include "igt_sysfs.h" #include "igt_psr.h" #include "kms_dsc_helper.h" +#include "i915/intel_fbc.h" #include <errno.h> #include <stdbool.h> #include <stdio.h>
@@ -157,9 +158,11 @@ typedef struct {struct drm_mode_rect cursor_clip;enum operations op;enum plane_move_postion pos; +enum fbc_mode op_fbc_mode;int test_plane_id;igt_plane_t *test_plane;bool big_fb_test; +bool fbc_flag;cairo_t *cr;uint32_t screen_changes;int cur_x, cur_y;
@@ -865,6 +868,11 @@ static void run(data_t *data)igt_assert (psr_wait_entry (data->debugfs_fd,PSR_MODE_2 ,NULL )); +if (data->fbc_flag) +igt_assert_f (intel_fbc_wait_until_enabled (data->drm_fd, + data->pipe), +"FBC still disabled" ); + data->screen_changes =0 ;switch (data->op) {
@@ -967,10 +975,15 @@ igt_main {data_t data = {};igt_output_t *outputs[IGT_MAX_PIPES *IGT_MAX_PIPES ]; -int i, j, k; +int i, j, k, y;int pipes[IGT_MAX_PIPES *IGT_MAX_PIPES ];int n_pipes =0 ;int coexist_features[IGT_MAX_PIPES *IGT_MAX_PIPES ]; +const char *append_fbc_subtest[2 ] = { +"" , +"fbc_" + }; +int fbc_status[] = {FBC_DISABLED ,FBC_ENABLED }; igt_fixture {drmModeResPtr res;
@@ -986,6 +999,11 @@ igt_maindisplay_init (&data); +if ((intel_display_ver (intel_get_drm_devid (data.drm_fd) ==20 )) && + (intel_fbc_supported_on_chipset (data.drm_fd, data.pipe))) { + data.fbc_flag = true; + } +/* Test if PSR2 can be enabled */ igt_require_f(psr_enable(data.drm_fd, data.debugfs_fd, PSR_MODE_2_SEL_FETCH),
@@ -1020,54 +1038,116 @@ igt_main } } -/* Verify primary plane selective fetch */ -igt_describe ("Test that selective fetch works on primary plane" ); - igt_subtest_with_dynamic_f("primary-%s-sf-dmg-area", op_str(data.op)) { -for (i =0 ; i < n_pipes; i++) { -if (!pipe_output_combo_valid (&data.display, pipes[i], outputs[i])) -continue ; +for (y =0 ; y <ARRAY_SIZE (fbc_status); y++) { -for (j =FEATURE_NONE ; j <FEATURE_COUNT ; j++) { -if (j !=FEATURE_NONE && !(coexist_features[i] & j)) + data.op_fbc_mode = fbc_status[y]; +if (data.op_fbc_mode ==FBC_DISABLED ) + data.fbc_flag = false; + +/* Verify primary plane selective fetch */ +igt_describe ("Test that selective fetch works on primary plane" ); + igt_subtest_with_dynamic_f("%sprimary-%s-sf-dmg-area", append_fbc_subtest[y], op_str(data.op)) { +for (i =0 ; i < n_pipes; i++) { +if (!pipe_output_combo_valid (&data.display, pipes[i], outputs[i]))continue ; -igt_dynamic_f ("pipe-%s-%s%s" ,kmstest_pipe_name (pipes[i]), -igt_output_name (outputs[i]), - coexist_feature_str(j)) { - data.pipe = pipes[i]; - data.output = outputs[i]; - data.test_plane_id =DRM_PLANE_TYPE_PRIMARY ; - data.coexist_feature = j; -for (k =1 ; k <=MAX_DAMAGE_AREAS ; k++) { - data.damage_area_count = k; -prepare (&data); -run (&data); -cleanup (&data); + +for (j =FEATURE_NONE ; j <FEATURE_COUNT ; j++) { +if (j !=FEATURE_NONE && !(coexist_features[i] & j)) +continue ; +igt_dynamic_f ("pipe-%s-%s%s" ,kmstest_pipe_name (pipes[i]), +igt_output_name (outputs[i]), + coexist_feature_str(j)) { + data.pipe = pipes[i]; + data.output = outputs[i]; + data.test_plane_id =DRM_PLANE_TYPE_PRIMARY ; + data.coexist_feature = j; +for (k =1 ; k <=MAX_DAMAGE_AREAS ; k++) { + data.damage_area_count = k; +prepare (&data); +run (&data); +cleanup (&data); + } } } } } - } -/* Verify primary plane selective fetch with big fb */ - data.big_fb_test =1 ; -igt_describe ("Test that selective fetch works on primary plane with big fb" ); - igt_subtest_with_dynamic_f("primary-%s-sf-dmg-area-big-fb", op_str(data.op)) { -for (i =0 ; i < n_pipes; i++) { -if (!pipe_output_combo_valid (&data.display, pipes[i], outputs[i])) -continue ; +/* Verify primary plane selective fetch with big fb */ + data.big_fb_test =1 ; +igt_describe ("Test that selective fetch works on primary plane with big fb" ); + igt_subtest_with_dynamic_f("%sprimary-%s-sf-dmg-area-big-fb", append_fbc_subtest[y], op_str(data.op)) { +for (i =0 ; i < n_pipes; i++) { +if (!pipe_output_combo_valid (&data.display, pipes[i], outputs[i])) +continue ; -for (j =FEATURE_NONE ; j <FEATURE_COUNT ; j++) { -if (j !=FEATURE_NONE && !(coexist_features[i] & j)) +for (j =FEATURE_NONE ; j <FEATURE_COUNT ; j++) { +if (j !=FEATURE_NONE && !(coexist_features[i] & j)) +continue ; +igt_dynamic_f ("pipe-%s-%s%s" ,kmstest_pipe_name (pipes[i]), +igt_output_name (outputs[i]), + coexist_feature_str(j)) { + data.pipe = pipes[i]; + data.output = outputs[i]; + data.test_plane_id =DRM_PLANE_TYPE_PRIMARY ; + data.coexist_feature = j; +for (k =1 ; k <=MAX_DAMAGE_AREAS ; k++) { + data.damage_area_count = k; +prepare (&data); +run (&data); +cleanup (&data); + } + } + } + } + } + + data.big_fb_test =0 ; +/* Verify overlay plane selective fetch */ +igt_describe ("Test that selective fetch works on overlay plane" ); + igt_subtest_with_dynamic_f("%soverlay-%s-sf-dmg-area", append_fbc_subtest[y], op_str(data.op)) { +for (i =0 ; i < n_pipes; i++) { +if (!pipe_output_combo_valid (&data.display, pipes[i], outputs[i]))continue ; -igt_dynamic_f ("pipe-%s-%s%s" ,kmstest_pipe_name (pipes[i]), -igt_output_name (outputs[i]), - coexist_feature_str(j)) { - data.pipe = pipes[i]; - data.output = outputs[i]; - data.test_plane_id =DRM_PLANE_TYPE_PRIMARY ; - data.coexist_feature = j; -for (k =1 ; k <=MAX_DAMAGE_AREAS ; k++) { - data.damage_area_count = k; + +for (j =FEATURE_NONE ; j <FEATURE_COUNT ; j++) { +if (j !=FEATURE_NONE && !(coexist_features[i] & j)) +continue ; +igt_dynamic_f ("pipe-%s-%s%s" ,kmstest_pipe_name (pipes[i]), +igt_output_name (outputs[i]), + coexist_feature_str(j)) { + data.pipe = pipes[i]; + data.output = outputs[i]; + data.test_plane_id =DRM_PLANE_TYPE_OVERLAY ; + data.coexist_feature = j; +for (k =1 ; k <=MAX_DAMAGE_AREAS ; k++) { + data.damage_area_count = k; +prepare (&data); +run (&data); +cleanup (&data); + } + } + } + } + } + + data.damage_area_count =1 ; +/* Verify cursor plane selective fetch */ +igt_describe ("Test that selective fetch works on cursor plane" ); + igt_subtest_with_dynamic_f("%scursor-%s-sf", append_fbc_subtest[y], op_str(data.op)) { +for (i =0 ; i < n_pipes; i++) { +if (!pipe_output_combo_valid (&data.display, pipes[i], outputs[i])) +continue ; + +for (j =FEATURE_NONE ; j <FEATURE_COUNT ; j++) { +if (j !=FEATURE_NONE && !(coexist_features[i] & j)) +continue ; +igt_dynamic_f ("pipe-%s-%s%s" ,kmstest_pipe_name (pipes[i]), +igt_output_name (outputs[i]), + coexist_feature_str(j)) { + data.pipe = pipes[i]; + data.output = outputs[i]; + data.test_plane_id =DRM_PLANE_TYPE_CURSOR ; + data.coexist_feature = j;prepare (&data);run (&data);cleanup (&data);
@@ -1075,28 +1155,24 @@ igt_main } } } - } - data.big_fb_test =0 ; -/* Verify overlay plane selective fetch */ -igt_describe ("Test that selective fetch works on overlay plane" ); - igt_subtest_with_dynamic_f("overlay-%s-sf-dmg-area", op_str(data.op)) { -for (i =0 ; i < n_pipes; i++) { -if (!pipe_output_combo_valid (&data.display, pipes[i], outputs[i])) -continue ; - -for (j =FEATURE_NONE ; j <FEATURE_COUNT ; j++) { -if (j !=FEATURE_NONE && !(coexist_features[i] & j)) + data.op =PLANE_MOVE_CONTINUOUS ; +igt_describe ("Test that selective fetch works on moving cursor plane (no update)" ); + igt_subtest_with_dynamic_f("%scursor-%s-sf", append_fbc_subtest[y], op_str(data.op)) { +for (i =0 ; i < n_pipes; i++) { +if (!pipe_output_combo_valid (&data.display, pipes[i], outputs[i]))continue ; -igt_dynamic_f ("pipe-%s-%s%s" ,kmstest_pipe_name (pipes[i]), -igt_output_name (outputs[i]), - coexist_feature_str(j)) { - data.pipe = pipes[i]; - data.output = outputs[i]; - data.test_plane_id =DRM_PLANE_TYPE_OVERLAY ; - data.coexist_feature = j; -for (k =1 ; k <=MAX_DAMAGE_AREAS ; k++) { - data.damage_area_count = k; + +for (j =FEATURE_NONE ; j <FEATURE_COUNT ; j++) { +if (j !=FEATURE_NONE && !(coexist_features[i] & j)) +continue ; +igt_dynamic_f ("pipe-%s-%s%s" ,kmstest_pipe_name (pipes[i]), +igt_output_name (outputs[i]), + coexist_feature_str(j)) { + data.pipe = pipes[i]; + data.output = outputs[i]; + data.test_plane_id =DRM_PLANE_TYPE_CURSOR ; + data.coexist_feature = j;prepare (&data);run (&data);cleanup (&data);
@@ -1104,130 +1180,129 @@ igt_main } } } - } - - data.damage_area_count =1 ; -/* Verify cursor plane selective fetch */ -igt_describe ("Test that selective fetch works on cursor plane" ); - igt_subtest_with_dynamic_f("cursor-%s-sf", op_str(data.op)) { -for (i =0 ; i < n_pipes; i++) { -if (!pipe_output_combo_valid (&data.display, pipes[i], outputs[i])) -continue ; -for (j =FEATURE_NONE ; j <FEATURE_COUNT ; j++) { -if (j !=FEATURE_NONE && !(coexist_features[i] & j)) + data.op =PLANE_MOVE_CONTINUOUS_EXCEED ; +igt_describe ("Test that selective fetch works on moving cursor plane exceeding partially visible area (no update)" ); + igt_subtest_with_dynamic_f("%scursor-%s-sf", append_fbc_subtest[y], op_str(data.op)) { +for (i =0 ; i < n_pipes; i++) { +if (!pipe_output_combo_valid (&data.display, pipes[i], outputs[i]))continue ; -igt_dynamic_f ("pipe-%s-%s%s" ,kmstest_pipe_name (pipes[i]), -igt_output_name (outputs[i]), - coexist_feature_str(j)) { - data.pipe = pipes[i]; - data.output = outputs[i]; - data.test_plane_id =DRM_PLANE_TYPE_CURSOR ; - data.coexist_feature = j; -prepare (&data); -run (&data); -cleanup (&data); + +for (j =FEATURE_NONE ; j <FEATURE_COUNT ; j++) { +if (j !=FEATURE_NONE && !(coexist_features[i] & j)) +continue ; +igt_dynamic_f ("pipe-%s-%s%s" ,kmstest_pipe_name (pipes[i]), +igt_output_name (outputs[i]), + coexist_feature_str(j)) { + data.pipe = pipes[i]; + data.output = outputs[i]; + data.test_plane_id =DRM_PLANE_TYPE_CURSOR ; + data.coexist_feature = j; +prepare (&data); +run (&data); +cleanup (&data); + } } } } - } - - data.op =PLANE_MOVE_CONTINUOUS ; -igt_describe ("Test that selective fetch works on moving cursor plane (no update)" ); - igt_subtest_with_dynamic_f("cursor-%s-sf", op_str(data.op)) { -for (i =0 ; i < n_pipes; i++) { -if (!pipe_output_combo_valid (&data.display, pipes[i], outputs[i])) -continue ; -for (j =FEATURE_NONE ; j <FEATURE_COUNT ; j++) { -if (j !=FEATURE_NONE && !(coexist_features[i] & j)) + data.op =PLANE_MOVE_CONTINUOUS_EXCEED_FULLY ; +igt_describe ("Test that selective fetch works on moving cursor plane exceeding fully visible area (no update)" ); + igt_subtest_with_dynamic_f("%scursor-%s-sf", append_fbc_subtest[y], op_str(data.op)) { +for (i =0 ; i < n_pipes; i++) { +if (!pipe_output_combo_valid (&data.display, pipes[i], outputs[i]))continue ; -igt_dynamic_f ("pipe-%s-%s%s" ,kmstest_pipe_name (pipes[i]), -igt_output_name (outputs[i]), - coexist_feature_str(j)) { - data.pipe = pipes[i]; - data.output = outputs[i]; - data.test_plane_id =DRM_PLANE_TYPE_CURSOR ; - data.coexist_feature = j; -prepare (&data); -run (&data); -cleanup (&data); + +for (j =FEATURE_NONE ; j <FEATURE_COUNT ; j++) { +if (j !=FEATURE_NONE && !(coexist_features[i] & j)) +continue ; +igt_dynamic_f ("pipe-%s-%s%s" ,kmstest_pipe_name (pipes[i]), +igt_output_name (outputs[i]), + coexist_feature_str(j)) { + data.pipe = pipes[i]; + data.output = outputs[i]; + data.test_plane_id =DRM_PLANE_TYPE_CURSOR ; + data.coexist_feature = j; +prepare (&data); +run (&data); +cleanup (&data); + } } } } - } - data.op =PLANE_MOVE_CONTINUOUS_EXCEED ; -igt_describe ("Test that selective fetch works on moving cursor plane exceeding partially visible area (no update)" ); - igt_subtest_with_dynamic_f("cursor-%s-sf", op_str(data.op)) { -for (i =0 ; i < n_pipes; i++) { -if (!pipe_output_combo_valid (&data.display, pipes[i], outputs[i])) -continue ; - -for (j =FEATURE_NONE ; j <FEATURE_COUNT ; j++) { -if (j !=FEATURE_NONE && !(coexist_features[i] & j)) +/* Only for overlay plane */ + data.op =PLANE_MOVE ; +/* Verify overlay plane move selective fetch */ +igt_describe ("Test that selective fetch works on moving overlay plane" ); + igt_subtest_with_dynamic_f("%s%s-sf-dmg-area", append_fbc_subtest[y], op_str(data.op)) { +for (i =0 ; i < n_pipes; i++) { +if (!pipe_output_combo_valid (&data.display, pipes[i], outputs[i]))continue ; -igt_dynamic_f ("pipe-%s-%s%s" ,kmstest_pipe_name (pipes[i]), -igt_output_name (outputs[i]), - coexist_feature_str(j)) { - data.pipe = pipes[i]; - data.output = outputs[i]; - data.test_plane_id =DRM_PLANE_TYPE_CURSOR ; - data.coexist_feature = j; -prepare (&data); -run (&data); -cleanup (&data); + +for (j =FEATURE_NONE ; j <FEATURE_COUNT ; j++) { +if (j !=FEATURE_NONE && !(coexist_features[i] & j)) +continue ; +igt_dynamic_f ("pipe-%s-%s%s" ,kmstest_pipe_name (pipes[i]), +igt_output_name (outputs[i]), + coexist_feature_str(j)) { + data.pipe = pipes[i]; + data.output = outputs[i]; + data.test_plane_id =DRM_PLANE_TYPE_OVERLAY ; + data.coexist_feature = j; +for (k =POS_TOP_LEFT ; k <=POS_BOTTOM_RIGHT ; k++) { + data.pos = k; +prepare (&data); +run (&data); +cleanup (&data); + } + } } } } - } - - data.op =PLANE_MOVE_CONTINUOUS_EXCEED_FULLY ; -igt_describe ("Test that selective fetch works on moving cursor plane exceeding fully visible area (no update)" ); - igt_subtest_with_dynamic_f("cursor-%s-sf", op_str(data.op)) { -for (i =0 ; i < n_pipes; i++) { -if (!pipe_output_combo_valid (&data.display, pipes[i], outputs[i])) -continue ; -for (j =FEATURE_NONE ; j <FEATURE_COUNT ; j++) { -if (j !=FEATURE_NONE && !(coexist_features[i] & j)) + data.op =PLANE_MOVE_CONTINUOUS ; +igt_describe ("Test that selective fetch works on moving overlay plane (no update)" ); + igt_subtest_with_dynamic_f("%soverlay-%s-sf", append_fbc_subtest[y], op_str(data.op)) { +for (i =0 ; i < n_pipes; i++) { +if (!pipe_output_combo_valid (&data.display, pipes[i], outputs[i]))continue ; -igt_dynamic_f ("pipe-%s-%s%s" ,kmstest_pipe_name (pipes[i]), -igt_output_name (outputs[i]), - coexist_feature_str(j)) { + +for (j =FEATURE_NONE ; j <FEATURE_COUNT ; j++) { +if (j !=FEATURE_NONE && !(coexist_features[i] & j)) +continue ; +igt_dynamic_f ("pipe-%s-%s%s" ,kmstest_pipe_name (pipes[i]), +igt_output_name (outputs[i]), + coexist_feature_str(j)) { data.pipe = pipes[i]; data.output = outputs[i]; - data.test_plane_id =DRM_PLANE_TYPE_CURSOR ; + data.test_plane_id =DRM_PLANE_TYPE_OVERLAY ; data.coexist_feature = j;prepare (&data);run (&data);cleanup (&data); + } } } } - } -/* Only for overlay plane */ - data.op =PLANE_MOVE ; -/* Verify overlay plane move selective fetch */ -igt_describe ("Test that selective fetch works on moving overlay plane" ); - igt_subtest_with_dynamic_f("%s-sf-dmg-area", op_str(data.op)) { -for (i =0 ; i < n_pipes; i++) { -if (!pipe_output_combo_valid (&data.display, pipes[i], outputs[i])) -continue ; - -for (j =FEATURE_NONE ; j <FEATURE_COUNT ; j++) { -if (j !=FEATURE_NONE && !(coexist_features[i] & j)) + data.op =PLANE_MOVE_CONTINUOUS_EXCEED ; +igt_describe ("Test that selective fetch works on moving overlay plane partially exceeding visible area (no update)" ); + igt_subtest_with_dynamic_f("%soverlay-%s-sf", append_fbc_subtest[y], op_str(data.op)) { +for (i =0 ; i < n_pipes; i++) { +if (!pipe_output_combo_valid (&data.display, pipes[i], outputs[i]))continue ; -igt_dynamic_f ("pipe-%s-%s%s" ,kmstest_pipe_name (pipes[i]), -igt_output_name (outputs[i]), - coexist_feature_str(j)) { - data.pipe = pipes[i]; - data.output = outputs[i]; - data.test_plane_id =DRM_PLANE_TYPE_OVERLAY ; - data.coexist_feature = j; -for (k =POS_TOP_LEFT ; k <=POS_BOTTOM_RIGHT ; k++) { - data.pos = k; + +for (j =FEATURE_NONE ; j <FEATURE_COUNT ; j++) { +if (j !=FEATURE_NONE && !(coexist_features[i] & j)) +continue ; +igt_dynamic_f ("pipe-%s-%s%s" ,kmstest_pipe_name (pipes[i]), +igt_output_name (outputs[i]), + coexist_feature_str(j)) { + data.pipe = pipes[i]; + data.output = outputs[i]; + data.test_plane_id =DRM_PLANE_TYPE_OVERLAY ; + data.coexist_feature = j;prepare (&data);run (&data);cleanup (&data);
@@ -1235,103 +1310,84 @@ igt_main } } } - } - - data.op =PLANE_MOVE_CONTINUOUS ; -igt_describe ("Test that selective fetch works on moving overlay plane (no update)" ); - igt_subtest_with_dynamic_f("overlay-%s-sf", op_str(data.op)) { -for (i =0 ; i < n_pipes; i++) { -if (!pipe_output_combo_valid (&data.display, pipes[i], outputs[i])) -continue ; -for (j =FEATURE_NONE ; j <FEATURE_COUNT ; j++) { -if (j !=FEATURE_NONE && !(coexist_features[i] & j)) + data.op =PLANE_MOVE_CONTINUOUS_EXCEED_FULLY ; +igt_describe ("Test that selective fetch works on moving overlay plane fully exceeding visible area (no update)" ); + igt_subtest_with_dynamic_f("%soverlay-%s-sf", append_fbc_subtest[y], op_str(data.op)) { +for (i =0 ; i < n_pipes; i++) { +if (!pipe_output_combo_valid (&data.display, pipes[i], outputs[i]))continue ; -igt_dynamic_f ("pipe-%s-%s%s" ,kmstest_pipe_name (pipes[i]), -igt_output_name (outputs[i]), - coexist_feature_str(j)) { - data.pipe = pipes[i]; - data.output = outputs[i]; - data.test_plane_id =DRM_PLANE_TYPE_OVERLAY ; - data.coexist_feature = j; -prepare (&data); -run (&data); -cleanup (&data); - } - } - } - } - data.op =PLANE_MOVE_CONTINUOUS_EXCEED ; -igt_describe ("Test that selective fetch works on moving overlay plane partially exceeding visible area (no update)" ); - igt_subtest_with_dynamic_f("overlay-%s-sf", op_str(data.op)) { -for (i =0 ; i < n_pipes; i++) { -if (!pipe_output_combo_valid (&data.display, pipes[i], outputs[i])) -continue ; - -for (j =FEATURE_NONE ; j <FEATURE_COUNT ; j++) { -if (j !=FEATURE_NONE && !(coexist_features[i] & j)) -continue ; -igt_dynamic_f ("pipe-%s-%s%s" ,kmstest_pipe_name (pipes[i]), -igt_output_name (outputs[i]), - coexist_feature_str(j)) { - data.pipe = pipes[i]; - data.output = outputs[i]; - data.test_plane_id =DRM_PLANE_TYPE_OVERLAY ; - data.coexist_feature = j; -prepare (&data); -run (&data); -cleanup (&data); +for (j =FEATURE_NONE ; j <FEATURE_COUNT ; j++) { +if (j !=FEATURE_NONE && !(coexist_features[i] & j)) +continue ; +igt_dynamic_f ("pipe-%s-%s%s" ,kmstest_pipe_name (pipes[i]), +igt_output_name (outputs[i]), + coexist_feature_str(j)) { + data.pipe = pipes[i]; + data.output = outputs[i]; + data.test_plane_id =DRM_PLANE_TYPE_OVERLAY ; + data.coexist_feature = j; +prepare (&data); +run (&data); +cleanup (&data); + } } } } - } - - data.op =PLANE_MOVE_CONTINUOUS_EXCEED_FULLY ; -igt_describe ("Test that selective fetch works on moving overlay plane fully exceeding visible area (no update)" ); - igt_subtest_with_dynamic_f("overlay-%s-sf", op_str(data.op)) { -for (i =0 ; i < n_pipes; i++) { -if (!pipe_output_combo_valid (&data.display, pipes[i], outputs[i])) -continue ; -for (j =FEATURE_NONE ; j <FEATURE_COUNT ; j++) { -if (j !=FEATURE_NONE && !(coexist_features[i] & j)) +/* Verify primary plane selective fetch with overplay plane blended */ + data.op =OVERLAY_PRIM_UPDATE ; +igt_describe ("Test that selective fetch works on primary plane " +"with blended overlay plane" ); + igt_subtest_with_dynamic_f("%s%s-sf-dmg-area", append_fbc_subtest[y], op_str(data.op)) { +for (i =0 ; i < n_pipes; i++) { +if (!pipe_output_combo_valid (&data.display, pipes[i], outputs[i]))continue ; -igt_dynamic_f ("pipe-%s-%s%s" ,kmstest_pipe_name (pipes[i]), -igt_output_name (outputs[i]), - coexist_feature_str(j)) { - data.pipe = pipes[i]; - data.output = outputs[i]; - data.test_plane_id =DRM_PLANE_TYPE_OVERLAY ; - data.coexist_feature = j; -prepare (&data); -run (&data); -cleanup (&data); + +for (j =FEATURE_NONE ; j <FEATURE_COUNT ; j++) { +if (j !=FEATURE_NONE && !(coexist_features[i] & j)) +continue ; +igt_dynamic_f ("pipe-%s-%s%s" ,kmstest_pipe_name (pipes[i]), +igt_output_name (outputs[i]), + coexist_feature_str(j)) { + data.pipe = pipes[i]; + data.output = outputs[i]; +for (k =1 ; k <=MAX_DAMAGE_AREAS ; k++) { + data.damage_area_count = k; + data.test_plane_id =DRM_PLANE_TYPE_PRIMARY ; + data.coexist_feature = j; +prepare (&data); +run (&data); +cleanup (&data); + } + } } } } - } -/* Verify primary plane selective fetch with overplay plane blended */ - data.op =OVERLAY_PRIM_UPDATE ; -igt_describe ("Test that selective fetch works on primary plane " -"with blended overlay plane" ); - igt_subtest_with_dynamic_f("%s-sf-dmg-area", op_str(data.op)) { -for (i =0 ; i < n_pipes; i++) { -if (!pipe_output_combo_valid (&data.display, pipes[i], outputs[i])) -continue ; - -for (j =FEATURE_NONE ; j <FEATURE_COUNT ; j++) { -if (j !=FEATURE_NONE && !(coexist_features[i] & j)) +/* +* Verify overlay plane selective fetch using NV12 primary +* plane and continuous updates. +*/ + data.op =PLANE_UPDATE_CONTINUOUS ; + data.primary_format =DRM_FORMAT_NV12 ; +igt_describe ("Test that selective fetch works on overlay plane" ); + igt_subtest_with_dynamic_f("%soverlay-%s-sf", append_fbc_subtest[y], op_str(data.op)) { +for (i =0 ; i < n_pipes; i++) { +if (!pipe_output_combo_valid (&data.display, pipes[i], outputs[i]))continue ; -igt_dynamic_f ("pipe-%s-%s%s" ,kmstest_pipe_name (pipes[i]), -igt_output_name (outputs[i]), - coexist_feature_str(j)) { - data.pipe = pipes[i]; - data.output = outputs[i]; -for (k =1 ; k <=MAX_DAMAGE_AREAS ; k++) { - data.damage_area_count = k; - data.test_plane_id =DRM_PLANE_TYPE_PRIMARY ; + +for (j =FEATURE_NONE ; j <FEATURE_COUNT ; j++) { +if (j !=FEATURE_NONE && !(coexist_features[i] & j)) +continue ; +igt_dynamic_f ("pipe-%s-%s%s" ,kmstest_pipe_name (pipes[i]), +igt_output_name (outputs[i]), + coexist_feature_str(j)) { + data.pipe = pipes[i]; + data.output = outputs[i]; + data.damage_area_count =1 ; + data.test_plane_id =DRM_PLANE_TYPE_OVERLAY ; data.coexist_feature = j;prepare (&data);run (&data);
@@ -1342,37 +1398,6 @@ igt_main } } -/* -* Verify overlay plane selective fetch using NV12 primary -* plane and continuous updates. -*/ - data.op =PLANE_UPDATE_CONTINUOUS ; - data.primary_format =DRM_FORMAT_NV12 ; -igt_describe ("Test that selective fetch works on overlay plane" ); - igt_subtest_with_dynamic_f("overlay-%s-sf", op_str(data.op)) { -for (i =0 ; i < n_pipes; i++) { -if (!pipe_output_combo_valid (&data.display, pipes[i], outputs[i])) -continue ; - -for (j =FEATURE_NONE ; j <FEATURE_COUNT ; j++) { -if (j !=FEATURE_NONE && !(coexist_features[i] & j)) -continue ; -igt_dynamic_f ("pipe-%s-%s%s" ,kmstest_pipe_name (pipes[i]), -igt_output_name (outputs[i]), - coexist_feature_str(j)) { - data.pipe = pipes[i]; - data.output = outputs[i]; - data.damage_area_count =1 ; - data.test_plane_id =DRM_PLANE_TYPE_OVERLAY ; - data.coexist_feature = j; -prepare (&data); -run (&data); -cleanup (&data); - } - } - } - } - igt_fixture {close (data.debugfs_fd);display_fini (&data);
Signature · 1 line
2.25.1
Patchwork
CI[igt-dev] ✗ Fi.CI.BUILD: failure for Add FBC support to PSR/PSR2 tests (rev5)
In reply to Jeevan B== Series Details ==
== Series Details ==
Series: Add FBC support to PSR/PSR2 tests (rev5)
URL : https://patchwork.freedesktop.org/series/126689/
State : failure
== Summary ==
IGT patchset build failed on latest successful build d2af13d9f5be5ce23d996e4afd3e45990f5ab977 tests/intel/kms_pm_lpsp: Use lib helper to iterate connector modes
Tail of build.log:
Warning: Missing documentation for igt@kms_psr@fbc_pr_sprite_plane_move
Warning: Missing documentation for igt@kms_psr@fbc_pr_sprite_plane_onoff
Warning: Missing documentation for igt@kms_psr@fbc_pr_sprite_render
Warning: Missing documentation for igt@kms_psr@fbc_pr_suspend
Warning: Missing documentation for igt@kms_psr@fbc_psr2_basic
Warning: Missing documentation for igt@kms_psr@fbc_psr2_cursor_blt
Warning: Missing documentation for igt@kms_psr@fbc_psr2_cursor_mmap_cpu
Warning: Missing documentation for igt@kms_psr@fbc_psr2_cursor_mmap_gtt
Warning: Missing documentation for igt@kms_psr@fbc_psr2_cursor_plane_move
Warning: Missing documentation for igt@kms_psr@fbc_psr2_cursor_plane_onoff
Warning: Missing documentation for igt@kms_psr@fbc_psr2_cursor_render
Warning: Missing documentation for igt@kms_psr@fbc_psr2_dpms
Warning: Missing documentation for igt@kms_psr@fbc_psr2_no_drrs
Warning: Missing documentation for igt@kms_psr@fbc_psr2_primary_blt
Warning: Missing documentation for igt@kms_psr@fbc_psr2_primary_mmap_cpu
Warning: Missing documentation for igt@kms_psr@fbc_psr2_primary_mmap_gtt
Warning: Missing documentation for igt@kms_psr@fbc_psr2_primary_page_flip
Warning: Missing documentation for igt@kms_psr@fbc_psr2_primary_render
Warning: Missing documentation for igt@kms_psr@fbc_psr2_sprite_blt
Warning: Missing documentation for igt@kms_psr@fbc_psr2_sprite_mmap_cpu
Warning: Missing documentation for igt@kms_psr@fbc_psr2_sprite_mmap_gtt
Warning: Missing documentation for igt@kms_psr@fbc_psr2_sprite_plane_move
Warning: Missing documentation for igt@kms_psr@fbc_psr2_sprite_plane_onoff
Warning: Missing documentation for igt@kms_psr@fbc_psr2_sprite_render
Warning: Missing documentation for igt@kms_psr@fbc_psr2_suspend
Warning: Missing documentation for igt@kms_psr@fbc_psr_basic
Warning: Missing documentation for igt@kms_psr@fbc_psr_cursor_blt
Warning: Missing documentation for igt@kms_psr@fbc_psr_cursor_mmap_cpu
Warning: Missing documentation for igt@kms_psr@fbc_psr_cursor_mmap_gtt
Warning: Missing documentation for igt@kms_psr@fbc_psr_cursor_plane_move
Warning: Missing documentation for igt@kms_psr@fbc_psr_cursor_plane_onoff
Warning: Missing documentation for igt@kms_psr@fbc_psr_cursor_render
Warning: Missing documentation for igt@kms_psr@fbc_psr_dpms
Warning: Missing documentation for igt@kms_psr@fbc_psr_no_drrs
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_blt
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_mmap_cpu
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_mmap_gtt
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_page_flip
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_render
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_blt
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_mmap_cpu
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_mmap_gtt
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_plane_move
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_plane_onoff
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_render
Warning: Missing documentation for igt@kms_psr@fbc_psr_suspend Please refer: docs/test_documentation.md for more details [1654/1657] Generating xe_tests.html with a custom command. [1655/1657] Generating i915_tests.html with a custom command.
ninja: build stopped: subcommand failed.
Patchwork
CI[igt-dev] ✗ GitLab.Pipeline: warning for Add FBC support to PSR/PSR2 tests (rev5)
In reply to Jeevan B== Series Details ==
== Series Details ==
Series: Add FBC support to PSR/PSR2 tests (rev5)
URL : https://patchwork.freedesktop.org/series/126689/
State : warning
== Summary ==
Pipeline status: FAILED.
see https://gitlab.freedesktop.org/gfx-ci/igt-ci-tags/-/pipelines/1043227 for the overview.
build:tests-debian-meson has failed (https://gitlab.freedesktop.org/gfx-ci/igt-ci-tags/-/jobs/52046443):
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_blt
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_mmap_cpu
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_mmap_gtt
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_page_flip
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_render
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_blt
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_mmap_cpu
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_mmap_gtt
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_plane_move
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_plane_onoff
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_render
Warning: Missing documentation for igt@kms_psr@fbc_psr_suspend
Please refer: docs/test_documentation.md for more details
ninja: build stopped: subcommand failed.
section_end:1701070361:step_script
section_start:1701070361:cleanup_file_variables
Cleaning up project directory and file based variables section_end:1701070362:cleanup_file_variables
ERROR: Job failed: exit code 1
build:tests-debian-meson-mips has failed (https://gitlab.freedesktop.org/gfx-ci/igt-ci-tags/-/jobs/52046447):
Checking if the user of the pipeline is allowed...
Checking if the job's project is part of a well-known group...
Thank you for contributing to freedesktop.org
Fetching changes...
Reinitialized existing Git repository in /builds/gfx-ci/igt-ci-tags/.git/
Checking out 4d9b1b43 as detached HEAD (ref is intel/IGTPW_10271)...
Removing build/
Removing lib/i915/perf-configs/__pycache__/
Removing scripts/__pycache__/
Skipping Git submodules setup
section_end:1701070325:get_sources
section_start:1701070325:step_script
Executing "step_script" stage of the job script
Using docker image sha256:cc55efdc667be826910d414a562c76ce1130a9c15255a0dd115431bc42f83448 for registry.freedesktop.org/gfx-ci/igt-ci-tags/build-debian-mips:commit-4d9b1b43929e1cd15e8be9cb6f27bada2d9a52ea with digest registry.freedesktop.org/gfx-ci/igt-ci-tags/build-debian-mips@sha256:c829c44880da4782b7a72626c259ac6904b4bd5f08601e66b3be889ca1c0cf79 ... section_end:1701070327:step_script
section_start:1701070327:cleanup_file_variables
Cleaning up project directory and file based variables
section_end:1701070328:cleanup_file_variables
ERROR: Job failed (system failure): Error response from daemon: no such image: docker.io/library/sha256:cc55efdc667be826910d414a562c76ce1130a9c15255a0dd115431bc42f83448: image not known (docker.go:570:0s)
build:tests-fedora has failed (https://gitlab.freedesktop.org/gfx-ci/igt-ci-tags/-/jobs/52046438):
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_blt
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_mmap_cpu
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_mmap_gtt
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_page_flip
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_render
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_blt
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_mmap_cpu
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_mmap_gtt
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_plane_move
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_plane_onoff
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_render
Warning: Missing documentation for igt@kms_psr@fbc_psr_suspend
Please refer: docs/test_documentation.md for more details
ninja: build stopped: subcommand failed.
section_end:1701070360:step_script section_start:1701070360:cleanup_file_variables
Cleaning up project directory and file based variables section_end:1701070360:cleanup_file_variables
ERROR: Job failed: exit code 1
build:tests-fedora-clang has failed (https://gitlab.freedesktop.org/gfx-ci/igt-ci-tags/-/jobs/52046442):
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_blt
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_mmap_cpu
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_mmap_gtt
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_page_flip
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_render
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_blt
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_mmap_cpu
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_mmap_gtt
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_plane_move
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_plane_onoff
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_render
Warning: Missing documentation for igt@kms_psr@fbc_psr_suspend
Please refer: docs/test_documentation.md for more details
ninja: build stopped: subcommand failed.
section_end:1701070409:step_script
section_start:1701070409:cleanup_file_variables
Cleaning up project directory and file based variables section_end:1701070410:cleanup_file_variables
ERROR: Job failed: exit code 1
build:tests-fedora-no-libdrm-nouveau has failed (https://gitlab.freedesktop.org/gfx-ci/igt-ci-tags/-/jobs/52046441):
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_blt
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_mmap_cpu
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_mmap_gtt
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_page_flip
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_render
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_blt
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_mmap_cpu
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_mmap_gtt
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_plane_move
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_plane_onoff
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_render
Warning: Missing documentation for igt@kms_psr@fbc_psr_suspend
Please refer: docs/test_documentation.md for more details
ninja: build stopped: subcommand failed.
section_end:1701070359:step_script
section_start:1701070359:cleanup_file_variables
Cleaning up project directory and file based variables section_end:1701070360:cleanup_file_variables
ERROR: Job failed: exit code 1
build:tests-fedora-no-libunwind has failed (https://gitlab.freedesktop.org/gfx-ci/igt-ci-tags/-/jobs/52046439):
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_blt
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_mmap_cpu
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_mmap_gtt
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_page_flip
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_render
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_blt
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_mmap_cpu
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_mmap_gtt
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_plane_move
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_plane_onoff
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_render
Warning: Missing documentation for igt@kms_psr@fbc_psr_suspend
Please refer: docs/test_documentation.md for more details
ninja: build stopped: subcommand failed.
section_end:1701070391:step_script
section_start:1701070391:cleanup_file_variables
Cleaning up project directory and file based variables section_end:1701070391:cleanup_file_variables
ERROR: Job failed: exit code 1
build:tests-fedora-oldest-meson has failed (https://gitlab.freedesktop.org/gfx-ci/igt-ci-tags/-/jobs/52046440):
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_blt
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_mmap_cpu
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_mmap_gtt
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_page_flip
Warning: Missing documentation for igt@kms_psr@fbc_psr_primary_render
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_blt
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_mmap_cpu
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_mmap_gtt
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_plane_move
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_plane_onoff
Warning: Missing documentation for igt@kms_psr@fbc_psr_sprite_render
Warning: Missing documentation for igt@kms_psr@fbc_psr_suspend
Please refer: docs/test_documentation.md for more details
ninja: build stopped: subcommand failed.
section_end:1701070359:step_script
section_start:1701070359:cleanup_file_variables
Cleaning up project directory and file based variables section_end:1701070359:cleanup_file_variables
ERROR: Job failed: exit code 1
== Logs ==
For more details see: https://gitlab.freedesktop.org/gfx-ci/igt-ci-tags/-/pipelines/1043227