Skip to contentSkip to conversation

ATF and OP-TEE Firewalling for K3 devices.

PATCH Superseded Manorit Chawdhry 3 participants 15 messages Dec 6, 2023 – Dec 29, 2023 Arm (32-bit)

v6 of 7 Superseded Latest is v7 →

lore
Share & tools
lore
#0 lore raw

v6 cover ATF and OP-TEE Firewalling for K3 devices.

K3 devices have firewalls that are used to prevent illegal accesses to memory regions that are deemed secure. The series prevents the illegal accesses to ATF and OP-TEE regions that are present in different K3 devices.

AM62X, AM62AX and AM64X are currently in hold due to some firewall configurations that our System Controller (TIFS) needs to handle. The devices that are not configured with the firewalling nodes will not be affected and can continue to work fine until the firewall nodes are added so will be a non-blocking merge.

Test Logs: https://gist.github.com/manorit2001/c929e6ccab03f55b3828896fbd04184b
CICD Run: https://github.com/u-boot/u-boot/pull/442

---
Changes in v6:
- Rebase on -next
- Link to v5: https://lore.kernel.org/r/[email protected]

---
Manorit Chawdhry (8):
binman: ti-secure: Add support for firewalling entities
binman: ftest: Add test for ti-secure firewall node
binman: k3: Add k3-security.h and include it in k3-binman.dtsi
binman: j721e: Add firewall configurations
binman: j721s2: Add firewall configurations
binman: j7200: Add firewall configurations
docs: k3: Cleanup FIT signature documentation
docs: k3: Add secure booting documentation

 arch/arm/dts/k3-binman.dtsi                        |   2 +
 arch/arm/dts/k3-j7200-binman.dtsi                  | 152 ++++++++++
 arch/arm/dts/k3-j721e-binman.dtsi                  | 196 +++++++++++++
 arch/arm/dts/k3-j721s2-binman.dtsi                 | 217 ++++++++++++++
 arch/arm/dts/k3-security.h                         |  58 ++++
 doc/board/ti/k3.rst                                | 315 ++++++++++++++-------
 tools/binman/btool/openssl.py                      |  16 +-
 tools/binman/etype/ti_secure.py                    |  95 +++++++
 tools/binman/etype/x509_cert.py                    |   4 +-
 tools/binman/ftest.py                              |  23 ++
 tools/binman/test/324_ti_secure_firewall.dts       |  28 ++
 .../325_ti_secure_firewall_missing_property.dts    |  28 ++
 12 files changed, 1032 insertions(+), 102 deletions(-)

---
base-commit: d379150621a5dbe7929b43d184cb51bb8c3ec4cb
change-id: 20230724-binman-firewalling-65ecdb23ec0a

Best regards,

Signature · 1 line
Manorit Chawdhry <[email protected]>
#1 lore raw

PATCH v6 1/8 binman: ti-secure: Add support for firewalling entities

We can now firewall entities while loading them through our secure entity TIFS, the required information should be present in the certificate that is being parsed by TIFS.

The following commit adds the support to enable the certificates to be generated if the firewall configurations are present in the binman dtsi nodes.

---
 tools/binman/btool/openssl.py   | 16 ++++++-
 tools/binman/etype/ti_secure.py | 95 +++++++++++++++++++++++++++++++++++++++++
 tools/binman/etype/x509_cert.py |  4 +-
 3 files changed, 112 insertions(+), 3 deletions(-)
tools/binman/btool/openssl.py +14 -2
index 7ee2683ab236..fe81a1f51b1e 100644
@@ -82,7 +82,7 @@ imageSize              = INTEGER:{len(indata)}
         return self.run_cmd(*args)
 
     def x509_cert_sysfw(self, cert_fname, input_fname, key_fname, sw_rev,
-                  config_fname, req_dist_name_dict):
+                  config_fname, req_dist_name_dict, firewall_cert_data):
         """Create a certificate to be booted by system firmware
 
         Args:
@@ -94,6 +94,13 @@ imageSize              = INTEGER:{len(indata)}
             req_dist_name_dict (dict): Dictionary containing key-value pairs of
             req_distinguished_name section extensions, must contain extensions for
             C, ST, L, O, OU, CN and emailAddress
+            firewall_cert_data (dict):
+              - auth_in_place (int): The Priv ID for copying as the
+                specific host in firewall protected region
+              - num_firewalls (int): The number of firewalls in the
+                extended certificate
+              - certificate (str): Extended firewall certificate with
+                the information for the firewall configurations.
 
         Returns:
             str: Tool output
@@ -121,6 +128,7 @@ basicConstraints       = CA:true
 1.3.6.1.4.1.294.1.3    = ASN1:SEQUENCE:swrv
 1.3.6.1.4.1.294.1.34   = ASN1:SEQUENCE:sysfw_image_integrity
 1.3.6.1.4.1.294.1.35   = ASN1:SEQUENCE:sysfw_image_load
+1.3.6.1.4.1.294.1.37   = ASN1:SEQUENCE:firewall
 
 [ swrv ]
 swrv = INTEGER:{sw_rev}
@@ -132,7 +140,11 @@ imageSize              = INTEGER:{len(indata)}
 
 [ sysfw_image_load ]
 destAddr = FORMAT:HEX,OCT:00000000
-authInPlace = INTEGER:2
+authInPlace = INTEGER:{hex(firewall_cert_data['auth_in_place'])}
+
+[ firewall ]
+numFirewallRegions = INTEGER:{firewall_cert_data['num_firewalls']}
+{firewall_cert_data['certificate']}
 ''', file=outf)
         args = ['req', '-new', '-x509', '-key', key_fname, '-nodes',
                 '-outform', 'DER', '-out', cert_fname, '-config', config_fname,
tools/binman/etype/ti_secure.py +95 -0

133 lines not on this page · raw message

tools/binman/etype/x509_cert.py +3 -1
index fc0bb1227867..29630d1b86c8 100644
@@ -51,6 +51,7 @@ class Entry_x509_cert(Entry_collection):
         self.hashval_sysfw_data = None
         self.sysfw_inner_cert_ext_boot_block = None
         self.dm_data_ext_boot_block = None
+        self.firewall_cert_data = None
 
     def ReadNode(self):
         super().ReadNode()
@@ -98,7 +99,8 @@ class Entry_x509_cert(Entry_collection):
                 key_fname=self.key_fname,
                 config_fname=config_fname,
                 sw_rev=self.sw_rev,
-                req_dist_name_dict=self.req_dist_name)
+                req_dist_name_dict=self.req_dist_name,
+                firewall_cert_data=self.firewall_cert_data)
         elif type == 'rom':
             stdout = self.openssl.x509_cert_rom(
                 cert_fname=output_fname,
Signature · 1 line
2.41.0
#2 lore raw

PATCH v6 2/8 binman: ftest: Add test for ti-secure firewall node

In reply to Manorit Chawdhry

Add test for TI firewalling node in ti-secure.

---
 tools/binman/ftest.py                              | 23 ++++++++++++++++++
 tools/binman/test/324_ti_secure_firewall.dts       | 28 ++++++++++++++++++++++
 .../325_ti_secure_firewall_missing_property.dts    | 28 ++++++++++++++++++++++
 3 files changed, 79 insertions(+)
tools/binman/ftest.py +23 -0
index 5ace2a825dc5..d526ef705a13 100644
@@ -7035,6 +7035,29 @@ fdt         fdtmap                Extract the devicetree blob from the fdtmap
                                    entry_args=entry_args)[0]
         self.assertGreater(len(data), len(TI_UNSECURE_DATA))
 
+    def testPackTiSecureFirewall(self):
+        """Test that an image with a TI secured binary can be created"""
+        keyfile = self.TestFile('key.key')
+        entry_args = {
+            'keyfile': keyfile,
+        }
+        data_no_firewall = self._DoReadFileDtb('296_ti_secure.dts',
+                                   entry_args=entry_args)[0]
+        data_firewall = self._DoReadFileDtb('324_ti_secure_firewall.dts',
+                                   entry_args=entry_args)[0]
+        self.assertGreater(len(data_firewall),len(data_no_firewall))
+
+    def testPackTiSecureFirewallMissingProperty(self):
+        """Test that an image with a TI secured binary can be created"""
+        keyfile = self.TestFile('key.key')
+        entry_args = {
+            'keyfile': keyfile,
+        }
+        with self.assertRaises(ValueError) as e:
+            data_firewall = self._DoReadFileDtb('325_ti_secure_firewall_missing_property.dts',
+                                       entry_args=entry_args)[0]
+        self.assertRegex(str(e.exception), "Node '/binman/ti-secure': Subnode 'firewall-0-2' is missing properties: id,region")
+
     def testPackTiSecureMissingTool(self):
         """Test that an image with a TI secured binary (non-functional) can be created
         when openssl is missing"""
tools/binman/test/324_ti_secure_firewall.dts new file +28 -0
new file mode 100644
index 000000000000..7ec407fa67ba
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	binman {
+		ti-secure {
+			content = <&unsecure_binary>;
+			auth-in-place = <0xa02>;
+
+			firewall-0-2 {
+				id = <0>;
+				region = <2>;
+				control = <0x31a>;
+				permissions = <0xc3ffff>;
+				start_address = <0x0 0x9e800000>;
+				end_address = <0x0 0x9fffffff>;
+			};
+
+		};
+		unsecure_binary: blob-ext {
+			filename = "ti_unsecure.bin";
+		};
+	};
+};
tools/binman/test/325_ti_secure_firewall_missing_property.dts new file +28 -0
new file mode 100644
index 000000000000..24a0a9962503
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/dts-v1/;
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	binman {
+		ti-secure {
+			content = <&unsecure_binary>;
+			auth-in-place = <0xa02>;
+
+			firewall-0-2 {
+				// id = <0>;
+				// region = <2>;
+				control = <0x31a>;
+				permissions = <0xc3ffff>;
+				start_address = <0x0 0x9e800000>;
+				end_address = <0x0 0x9fffffff>;
+			};
+
+		};
+		unsecure_binary: blob-ext {
+			filename = "ti_unsecure.bin";
+		};
+	};
+};
Signature · 1 line
2.41.0
#3 lore raw

PATCH v6 3/8 binman: k3: Add k3-security.h and include it in k3-binman.dtsi

In reply to Manorit Chawdhry

For readability during configuring firewalls, adding k3-security.h file and including it in k3-binman.dtsi to be accessible across K3 SoCs

---
 arch/arm/dts/k3-binman.dtsi |  2 ++
 arch/arm/dts/k3-security.h  | 58 +++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 60 insertions(+)
arch/arm/dts/k3-binman.dtsi +2 -0
index c7513e1a5dd7..b160192d18bf 100644
@@ -3,6 +3,8 @@
  * Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/
  */
 
+#include "k3-security.h"
+
 / {
 	binman: binman {
 		multiple-images;
arch/arm/dts/k3-security.h new file +58 -0

58 lines not on this page · raw message

Signature · 1 line
2.41.0
#4 lore raw

PATCH v6 4/8 binman: j721e: Add firewall configurations

In reply to Manorit Chawdhry

The following commits adds the configuration of firewalls required to protect ATF and OP-TEE memory region from non-secure reads and writes using master and slave firewalls present in our K3 SOCs.

---
 arch/arm/dts/k3-j721e-binman.dtsi | 196 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 196 insertions(+)
arch/arm/dts/k3-j721e-binman.dtsi +196 -0
index 5ddb474e3a41..f428aa81a6c1 100644
@@ -146,6 +146,202 @@
 
 		fit {
 			images {
+				atf {
+					ti-secure {
+						auth-in-place = <0xa02>;
+
+						firewall-257-0 {
+							/* cpu_0_cpu_0_msmc Background Firewall */
+							id = <257>;
+							region = <0>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_BG | FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ALL << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD |
+											FWPERM_NON_SECURE_PRIV_RWCD |
+											FWPERM_NON_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x0>;
+							end_address = <0xff 0xffffffff>;
+						};
+
+						firewall-257-1 {
+							/* cpu_0_cpu_0_msmc Foreground Firewall */
+							id = <257>;
+							region = <1>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ARMV8 << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x70000000>;
+							end_address = <0x0 0x7001ffff>;
+						};
+
+						firewall-284-0 {
+							/* dru_0_msmc Background Firewall */
+							id = <284>;
+							region = <0>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_BG | FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ALL << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD |
+											FWPERM_NON_SECURE_PRIV_RWCD |
+											FWPERM_NON_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x0>;
+							end_address = <0xff 0xffffffff>;
+						};
+
+						firewall-284-1 {
+							/* dru_0_msmc Foreground Firewall */
+							id = <284>;
+							region = <1>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ARMV8 << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x70000000>;
+							end_address = <0x0 0x7001ffff>;
+						};
+
+						/*	firewall-4760-0 {
+						 *		nb_slv0__mem0 Background Firewall
+						 *		Already configured by the secure entity
+						 *	};
+						 */
+
+						firewall-4760-1 {
+							/* nb_slv0__mem0 Foreground Firewall */
+							id = <4760>;
+							region = <1>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ARMV8 << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x70000000>;
+							end_address = <0x0 0x7001ffff>;
+						};
+
+						/*	firewall-4761-0 {
+						 *		nb_slv1__mem0 Background Firewall
+						 *		Already configured by the secure entity
+						 *	};
+						 */
+
+						firewall-4761-1 {
+							/* nb_slv1__mem0 Foreground Firewall */
+							id = <4761>;
+							region = <1>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ARMV8 << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x70000000>;
+							end_address = <0x0 0x7001ffff>;
+						};
+
+					};
+				};
+
+				tee {
+					ti-secure {
+						auth-in-place = <0xa02>;
+
+						/* cpu_0_cpu_0_msmc region 0 and 1 configured
+						 * during ATF Firewalling
+						 */
+
+						firewall-257-2 {
+							/* cpu_0_cpu_0_msmc Foreground Firewall */
+							id = <257>;
+							region = <2>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ARMV8 << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x9e800000>;
+							end_address = <0x0 0x9fffffff>;
+						};
+
+						/* dru_0_msmc region 0 and 1 configured
+						 * during ATF Firewalling
+						 */
+
+						firewall-284-2 {
+							/* dru_0_msmc Foreground Firewall */
+							id = <284>;
+							region = <2>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ARMV8 << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x9e800000>;
+							end_address = <0x0 0x9fffffff>;
+						};
+
+						firewall-4762-0 {
+							/* nb_slv2__mem0 Background Firewall */
+							id = <4762>;
+							region = <0>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_BG | FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ALL << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD |
+											FWPERM_NON_SECURE_PRIV_RWCD |
+											FWPERM_NON_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x0>;
+							end_address = <0xff 0xffffffff>;
+						};
+
+						firewall-4762-1 {
+							/* nb_slv2__mem0 Foreground Firewall */
+							id = <4762>;
+							region = <1>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ARMV8 << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x9e800000>;
+							end_address = <0x0 0x9fffffff>;
+						};
+
+						firewall-4763-0 {
+							/* nb_slv3__mem0 Background Firewall */
+							id = <4763>;
+							region = <0>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_BG | FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ALL << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD |
+											FWPERM_NON_SECURE_PRIV_RWCD |
+											FWPERM_NON_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x0>;
+							end_address = <0xff 0xffffffff>;
+						};
+
+						firewall-4763-1 {
+							/* nb_slv3__mem0 Foreground Firewall */
+							id = <4763>;
+							region = <1>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ARMV8 << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x9e800000>;
+							end_address = <0x0 0x9fffffff>;
+						};
+					};
+				};
 				dm {
 					ti-secure {
 						content = <&dm>;
Signature · 1 line
2.41.0
#5 lore raw

Re: [PATCH v6 4/8] binman: j721e: Add firewall configurations

Quoted 36 lines · Manorit Chawdhry

The following commits adds the configuration of firewalls required to protect ATF and OP-TEE memory region from non-secure reads and writes using master and slave firewalls present in our K3 SOCs.

---
  arch/arm/dts/k3-j721e-binman.dtsi | 196 ++++++++++++++++++++++++++++++++++++++
  1 file changed, 196 insertions(+)
arch/arm/dts/k3-j721e-binman.dtsi +19 -0
index 5ddb474e3a41..f428aa81a6c1 100644
@@ -146,6 +146,202 @@
 
  		fit {
  			images {
+				atf {
+					ti-secure {
+						auth-in-place = <0xa02>;
+
+						firewall-257-0 {
+							/* cpu_0_cpu_0_msmc Background Firewall */
+							id = <257>;
+							region = <0>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_BG | FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ALL << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD |
+											FWPERM_NON_SECURE_PRIV_RWCD |
+											FWPERM_NON_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x0>;
+							end_address = <0xff 0xffffffff>;
+						};
+

arch/arm/dts/k3-j721e-binman.dtsi line 177

Quoted 10 lines
arch/arm/dts/k3-j721e-binman.dtsi +10 -0
+						firewall-257-1 {
+							/* cpu_0_cpu_0_msmc Foreground Firewall */
+							id = <257>;
+							region = <1>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ARMV8 << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x70000000>;

7 levels of indentation, impressive :)

This start address should always match CONFIG_K3_ATF_LOAD_ADDR, any way you can just use that here?

Also this seems like a lot to add for each SoC, and much of it looks similar (at least for Jacinto class devices), could be an opportunity for templating.

Andrew

Quoted 2 lines
arch/arm/dts/k3-j721e-binman.dtsi +2 -0
+							end_address = <0x0 0x7001ffff>;
+						};
#6 lore raw

Re: [PATCH v6 4/8] binman: j721e: Add firewall configurations

Hi Andrew,

Quoted 40 lines · Andrew Davis
Quoted 39 lines · Manorit Chawdhry

The following commits adds the configuration of firewalls required to protect ATF and OP-TEE memory region from non-secure reads and writes using master and slave firewalls present in our K3 SOCs.

---
  arch/arm/dts/k3-j721e-binman.dtsi | 196 ++++++++++++++++++++++++++++++++++++++
  1 file changed, 196 insertions(+)
arch/arm/dts/k3-j721e-binman.dtsi +23 -0
index 5ddb474e3a41..f428aa81a6c1 100644
@@ -146,6 +146,202 @@
  		fit {
  			images {
+				atf {
+					ti-secure {
+						auth-in-place = <0xa02>;
+
+						firewall-257-0 {
+							/* cpu_0_cpu_0_msmc Background Firewall */
+							id = <257>;
+							region = <0>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_BG | FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ALL << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD |
+											FWPERM_NON_SECURE_PRIV_RWCD |
+											FWPERM_NON_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x0>;
+							end_address = <0xff 0xffffffff>;
+						};
+
+						firewall-257-1 {
+							/* cpu_0_cpu_0_msmc Foreground Firewall */
+							id = <257>;
+							region = <1>;
Quoted 8 lines

arch/arm/dts/k3-j721e-binman.dtsi line 177

Quoted 6 lines
arch/arm/dts/k3-j721e-binman.dtsi +6 -0
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ARMV8 << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x70000000>;

7 levels of indentation, impressive :)

Couldn't figure out a better way..

Quoted 3 lines

This start address should always match CONFIG_K3_ATF_LOAD_ADDR, any way you can just use that here?

I am hesitant to use that tbh... slave firewalls are also being configured and changing the ATF address just directly and thinking everything can work as is is not the way firewalling is going forward with, any other better suggestion as to how I can handle that?

Quoted 4 lines

Also this seems like a lot to add for each SoC, and much of it looks similar (at least for Jacinto class devices), could be an opportunity for templating.

Just talked to Neha about this, have some insights and will try them for next revision if they work well. Thanks!

Regards,
Manorit

Quoted 4 lines

Andrew

Quoted 2 lines
arch/arm/dts/k3-j721e-binman.dtsi +2 -0
+							end_address = <0x0 0x7001ffff>;
+						};
#7 lore raw

PATCH v6 5/8 binman: j721s2: Add firewall configurations

In reply to Manorit Chawdhry

The following commits adds the configuration of firewalls required to protect ATF and OP-TEE memory region from non-secure reads and writes using master and slave firewalls present in our K3 SOCs.

---
 arch/arm/dts/k3-j721s2-binman.dtsi | 217 +++++++++++++++++++++++++++++++++++++
 1 file changed, 217 insertions(+)
arch/arm/dts/k3-j721s2-binman.dtsi +217 -0
index 3922007b3b7a..72d54635f4e1 100644
@@ -159,6 +159,223 @@
 
 		fit {
 			images {
+				atf {
+					ti-secure {
+						auth-in-place = <0xa02>;
+
+						firewall-257-0 {
+							/* cpu_0_cpu_0_msmc Background Firewall */
+							id = <257>;
+							region = <0>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_BG | FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ALL << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD |
+											FWPERM_NON_SECURE_PRIV_RWCD |
+											FWPERM_NON_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x0>;
+							end_address = <0xff 0xffffffff>;
+						};
+
+						firewall-257-1 {
+							/* cpu_0_cpu_0_msmc Foreground Firewall */
+							id = <257>;
+							region = <1>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ARMV8 << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x70000000>;
+							end_address = <0x0 0x7001ffff>;
+						};
+
+						firewall-284-0 {
+							/* dru_0_msmc Background Firewall */
+							id = <284>;
+							region = <0>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_BG | FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ALL << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD |
+											FWPERM_NON_SECURE_PRIV_RWCD |
+											FWPERM_NON_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x0>;
+							end_address = <0xff 0xffffffff>;
+						};
+
+						firewall-284-1 {
+							/* dru_0_msmc Foreground Firewall */
+							id = <284>;
+							region = <1>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ARMV8 << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x70000000>;
+							end_address = <0x0 0x7001ffff>;
+						};
+
+						/*	firewall-5140-0 {
+						 *		nb_slv0__mem0 Background Firewall
+						 *		Already configured by the secure entity
+						 *	};
+						 */
+
+						firewall-5140-1 {
+							/* nb_slv0__mem0 Foreground Firewall */
+							id = <5140>;
+							region = <1>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ARMV8 << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x70000000>;
+							end_address = <0x0 0x7001ffff>;
+						};
+
+						/*	firewall-5140-0 {
+						 *		nb_slv1__mem0 Background Firewall
+						 *		Already configured by the secure entity
+						 *	};
+						 */
+
+						firewall-5141-1 {
+							/* nb_slv1__mem0 Foreground Firewall */
+							id = <5141>;
+							region = <1>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ARMV8 << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x70000000>;
+							end_address = <0x0 0x7001ffff>;
+						};
+
+					};
+				};
+
+				tee {
+					ti-secure {
+						auth-in-place = <0xa02>;
+
+						firewall-257-2 {
+							/* cpu_0_cpu_0_msmc Foreground Firewall */
+							id = <257>;
+							region = <2>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ARMV8 << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x9e800000>;
+							end_address = <0x0 0x9fffffff>;
+						};
+
+						firewall-284-2 {
+							/* dru_0_msmc Foreground Firewall */
+							id = <284>;
+							region = <2>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ARMV8 << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x9e800000>;
+							end_address = <0x0 0x9fffffff>;
+						};
+
+						firewall-5142-0 {
+							/* nb_slv2__mem0 Background Firewall - 0 */
+							id = <5142>;
+							region = <0>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_BG | FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ALL << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD |
+											FWPERM_NON_SECURE_PRIV_RWCD |
+											FWPERM_NON_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x0>;
+							end_address = <0xff 0xffffffff>;
+						};
+
+						firewall-5142-1 {
+							/* nb_slv2__mem0 Foreground Firewall */
+							id = <5142>;
+							region = <1>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ARMV8 << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x9e800000>;
+							end_address = <0x0 0x9fffffff>;
+						};
+
+						firewall-5143-0 {
+							/* nb_slv3__mem0 Background Firewall - 0 */
+							id = <5143>;
+							region = <0>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_BG | FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ALL << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD |
+											FWPERM_NON_SECURE_PRIV_RWCD |
+											FWPERM_NON_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x0>;
+							end_address = <0xff 0xffffffff>;
+						};
+
+						firewall-5143-1 {
+							/* nb_slv3__mem0 Foreground Firewall */
+							id = <5143>;
+							region = <1>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ARMV8 << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x9e800000>;
+							end_address = <0x0 0x9fffffff>;
+						};
+
+						firewall-5144-0 {
+							/* nb_slv4__mem0 Background Firewall - 0 */
+							id = <5144>;
+							region = <0>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_BG | FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ALL << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD |
+											FWPERM_NON_SECURE_PRIV_RWCD |
+											FWPERM_NON_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x0>;
+							end_address = <0xff 0xffffffff>;
+						};
+
+						firewall-5144-1 {
+							/* nb_slv4__mem0 Foreground Firewall */
+							id = <5144>;
+							region = <1>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ARMV8 << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x9e800000>;
+							end_address = <0x0 0x9fffffff>;
+						};
+
+					};
+				};
 				dm {
 					ti-secure {
 						content = <&dm>;
Signature · 1 line
2.41.0
#8 lore raw

Re: [PATCH v6 5/8] binman: j721s2: Add firewall configurations

Hi Manorit,

Quoted 10 lines · Manorit Chawdhry

The following commits adds the configuration of firewalls required to protect ATF and OP-TEE memory region from non-secure reads and writes using master and slave firewalls present in our K3 SOCs.

---
 arch/arm/dts/k3-j721s2-binman.dtsi | 217 +++++++++++++++++++++++++++++++++++++
 1 file changed, 217 insertions(+)

Just a minor point, but could you please reserve the 'binman' tag for patches in tools/binman ?

Thanks,
Simon

#9 lore raw

Re: [PATCH v6 5/8] binman: j721s2: Add firewall configurations

Hi Simon,

Quoted 8 lines · Simon Glass

Hi Manorit,

Quoted 5 lines · Manorit Chawdhry

The following commits adds the configuration of firewalls required to protect ATF and OP-TEE memory region from non-secure reads and writes using master and slave firewalls present in our K3 SOCs.

Quoted 8 lines
Quoted 5 lines
---
 arch/arm/dts/k3-j721s2-binman.dtsi | 217 +++++++++++++++++++++++++++++++++++++
 1 file changed, 217 insertions(+)

Just a minor point, but could you please reserve the 'binman' tag for patches in tools/binman ?

Sure, would do the needful!

Thanks and regards,
Manorit

Quoted 3 lines

Thanks,
Simon

#10 lore raw

PATCH v6 6/8 binman: j7200: Add firewall configurations

In reply to Manorit Chawdhry

The following commits adds the configuration of firewalls required to protect ATF and OP-TEE memory region from non-secure reads and writes using master and slave firewalls present in our K3 SOCs.

---
 arch/arm/dts/k3-j7200-binman.dtsi | 152 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 152 insertions(+)
arch/arm/dts/k3-j7200-binman.dtsi +152 -0
index 10c9d6cba7aa..efd7dd33b9ac 100644
@@ -195,6 +195,158 @@
 
 		fit {
 			images {
+				atf {
+					ti-secure {
+						auth-in-place = <0xa02>;
+
+						firewall-257-0 {
+							/* cpu_0_cpu_0_msmc Background Firewall */
+							id = <257>;
+							region = <0>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_BG | FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ALL << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD |
+											FWPERM_NON_SECURE_PRIV_RWCD |
+											FWPERM_NON_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x0>;
+							end_address = <0xff 0xffffffff>;
+						};
+
+						firewall-257-1 {
+							/* cpu_0_cpu_0_msmc Foreground Firewall */
+							id = <257>;
+							region = <1>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ARMV8 << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x70000000>;
+							end_address = <0x0 0x7001ffff>;
+						};
+
+						/*	firewall-4760-0 {
+						 *		nb_slv0__mem0 Background Firewall
+						 *		Already configured by the secure entity
+						 *	};
+						 */
+
+						firewall-4760-1 {
+							/* nb_slv0__mem0 Foreground Firewall */
+							id = <4760>;
+							region = <1>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ARMV8 << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x70000000>;
+							end_address = <0x0 0x7001ffff>;
+						};
+
+						/*	firewall-4761-0 {
+						 *		nb_slv1__mem0 Background Firewall
+						 *		Already configured by the secure entity
+						 *	};
+						 */
+
+						firewall-4761-1 {
+							/* nb_slv1__mem0 Foreground Firewall */
+							id = <4761>;
+							region = <1>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ARMV8 << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x70000000>;
+							end_address = <0x0 0x7001ffff>;
+						};
+
+					};
+				};
+
+				tee {
+					ti-secure {
+						auth-in-place = <0xa02>;
+
+						/* cpu_0_cpu_0_msmc region 0 and 1 configured
+						 * during ATF Firewalling
+						 */
+
+						firewall-257-2 {
+							/* cpu_0_cpu_0_msmc Foreground Firewall */
+							id = <257>;
+							region = <2>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ARMV8 << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x9e800000>;
+							end_address = <0x0 0x9fffffff>;
+						};
+
+						firewall-4762-0 {
+							/* nb_slv2__mem0 Background Firewall - 0 */
+							id = <4762>;
+							region = <0>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_BG | FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ALL << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD |
+											FWPERM_NON_SECURE_PRIV_RWCD |
+											FWPERM_NON_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x0>;
+							end_address = <0xff 0xffffffff>;
+						};
+
+						firewall-4762-1 {
+							/* nb_slv2__mem0 Foreground Firewall */
+							id = <4762>;
+							region = <1>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ARMV8 << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x9e800000>;
+							end_address = <0x0 0x9fffffff>;
+						};
+
+						firewall-4763-0 {
+							/* nb_slv3__mem0 Background Firewall - 0 */
+							id = <4763>;
+							region = <0>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_BG | FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ALL << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD |
+											FWPERM_NON_SECURE_PRIV_RWCD |
+											FWPERM_NON_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x0>;
+							end_address = <0xff 0xffffffff>;
+						};
+
+						firewall-4763-1 {
+							/* nb_slv3__mem0 Foreground Firewall */
+							id = <4763>;
+							region = <1>;
+							control = <(FWCTRL_EN | FWCTRL_LOCK |
+										FWCTRL_CACHE)>;
+							permissions = <((FWPRIVID_ARMV8 << FWPRIVID_SHIFT) |
+											FWPERM_SECURE_PRIV_RWCD |
+											FWPERM_SECURE_USER_RWCD)>;
+							start_address = <0x0 0x9e800000>;
+							end_address = <0x0 0x9fffffff>;
+						};
+
+					};
+				};
 				dm {
 					ti-secure {
 						content = <&dm>;
Signature · 1 line
2.41.0
#11 lore raw

PATCH v6 7/8 docs: k3: Cleanup FIT signature documentation

In reply to Manorit Chawdhry

The previous documentation had been very crude so refactor it to make it cleaner and concise.

---
 doc/board/ti/k3.rst | 270 +++++++++++++++++++++++++++++++++-------------------
 1 file changed, 171 insertions(+), 99 deletions(-)
doc/board/ti/k3.rst +171 -99
index a127215ce539..947b86ba8292 100644
@@ -248,6 +248,8 @@ Building tiboot3.bin
    the final `tiboot3.bin` binary. (or the `sysfw.itb` if your device
    uses the split binary flow)
 
+.. _k3_rst_include_start_build_steps_spl_r5:
+
 .. k3_rst_include_start_build_steps_spl_r5
 .. prompt:: bash $
 
@@ -312,6 +314,8 @@ use the `lite` option.
    finished, we can jump back into U-Boot again, this time running on a
    64bit core in the main domain.
 
+.. _k3_rst_include_start_build_steps_uboot:
+
 .. k3_rst_include_start_build_steps_uboot
 .. prompt:: bash $
 
@@ -330,144 +334,212 @@ wakeup and main domain and to boot to the U-Boot prompt
    | `tispl.bin` for HS devices or `tispl.bin_unsigned` for GP devices
    | `u-boot.img` for HS devices or `u-boot.img_unsigned` for GP devices
 
-Fit Signature Signing
+FIT signature signing
 ---------------------
 
-K3 Platforms have fit signature signing enabled by default on their primary
-platforms. Here we'll take an example for creating fit image for J721e platform
+K3 platforms have FIT signature signing enabled by default on their primary
+platforms. Here we'll take an example for creating FIT Image for J721E platform
 and the same can be extended to other platforms
 
-1. Describing FIT source
+Pre-requisites:
+
+* U-boot build (:ref:`U-boot build <k3_rst_include_start_build_steps_spl_r5>`)
+* Linux Image and Linux DTB prebuilt
+
+Describing FIT source
+^^^^^^^^^^^^^^^^^^^^^
 
-  .. code-block:: bash
+FIT Image is a packed structure containing binary blobs and configurations.
+The Kernel FIT Image that we have has Kernel Image, DTB and the DTBOs.  It
+supports packing multiple images and configurations that allow you to
+choose any configuration at runtime to boot from.
+
+.. code-block::
 
     /dts-v1/;
 
     / {
-            description = "Kernel fitImage for j721e-hs-evm";
-            #address-cells = <1>;
-
-            images {
-                    kernel-1 {
-                            description = "Linux kernel";
-                            data = /incbin/("Image");
-                            type = "kernel";
-                            arch = "arm64";
-                            os = "linux";
-                            compression = "none";
-                            load = <0x80080000>;
-                            entry = <0x80080000>;
-                            hash-1 {
-                                    algo = "sha512";
-                            };
-
-                    };
-                    fdt-ti_k3-j721e-common-proc-board.dtb {
-                            description = "Flattened Device Tree blob";
-                            data = /incbin/("k3-j721e-common-proc-board.dtb");
-                            type = "flat_dt";
-                            arch = "arm64";
-                            compression = "none";
-                            load = <0x83000000>;
-                            hash-1 {
-                                    algo = "sha512";
-                            };
-
-                    };
+        description = "FIT Image description";
+        #address-cells = <1>;
+
+        images {
+            [image-1]
+            [image-2]
+            [fdt-1]
+            [fdt-2]
+        }
+
+        configurations {
+            default = <conf-1>
+            [conf-1: image-1,fdt-1]
+            [conf-2: image-2,fdt-1]
+        }
+    }
+
+* Sample Images
+
+.. code-block::
+
+    kernel-1 {
+            description = "Linux kernel";
+            data = /incbin/("linux.bin");
+            type = "kernel";
+            arch = "arm64";
+            os = "linux";
+            compression = "gzip";
+            load = <0x81000000>;
+            entry = <0x81000000>;
+            hash-1 {
+                    algo = "sha512";
             };
-
-            configurations {
-                    default = "conf-ti_k3-j721e-common-proc-board.dtb";
-                    conf-ti_k3-j721e-common-proc-board.dtb {
-                            description = "Linux kernel, FDT blob";
-                            fdt = "fdt-ti_k3-j721e-common-proc-board.dtb";
-                            kernel = "kernel-1";
-                            signature-1 {
-                                    algo = "sha512,rsa4096";
-                                    key-name-hint = "custMpk";
-                                    sign-images = "kernel", "fdt";
-                            };
-                    };
+    };
+    fdt-ti_k3-j721e-common-proc-board.dtb {
+            description = "Flattened Device Tree blob";
+            data = /incbin/("arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dtb");
+            type = "flat_dt";
+            arch = "arm64";
+            compression = "none";
+            load = <0x83000000>;
+            hash-1 {
+                    algo = "sha512";
             };
     };
+    # Optional images
+    fdt-ti_k3-j721e-evm-virt-mac-client.dtbo {
+            description = "Flattened Device Tree blob";
+            data = /incbin/("arch/arm64/boot/dts/ti/k3-j721e-evm-virt-mac-client.dtbo");
+            type = "flat_dt";
+            arch = "arm64";
+            compression = "none";
+            load = <0x83080000>;
+            hash-1 {
+                    algo = "sha512";
+            };
+    };
+
+.. note::
+
+    Change the path in data variables to point to the respective files in your
+    local machine. For e.g change "linux.bin" to "<path-to-kernel-image>".
 
-  You would require to change the '/incbin/' lines to point to the respective
-  files in your local machine and the key-name-hint also needs to be changed
-  if you are using some other key other than the TI dummy key that we are
-  using for this example.
+For enabling usage of FIT signature, add the signature node to the
+corresponding configuration node as follows.
 
-2. Compile U-boot for the respective board
+* Sample Configurations
 
-.. include::  k3.rst
-    :start-after: .. k3_rst_include_start_build_steps_uboot
-    :end-before: .. k3_rst_include_end_build_steps_uboot
+.. code-block::
+
+    conf-ti_k3-j721e-common-proc-board.dtb {
+            description = "Linux kernel, FDT blob";
+            fdt = "fdt-ti_k3-j721e-common-proc-board.dtb";
+            kernel = "kernel-1";
+            signature-1 {
+                    algo = "sha512,rsa4096";
+                    key-name-hint = "custMpk";
+                    sign-images = "kernel", "fdt";
+            };
+    };
+    # Optional configurations
+    conf-ti_k3-j721e-evm-virt-mac-client.dtbo {
+            description = "FDTO blob";
+            fdt = "fdt-ti_k3-j721e-evm-virt-mac-client.dtbo";
+
+            signature-1 {
+                    algo = "sha512,rsa4096";
+                    key-name-hint = "custMpk";
+                    sign-images = "fdt";
+            };
+    };
+
+Specify all images you need the signature to authenticate as a part of
+sign-images. The key-name-hint needs to be changed if you are using some
+other key other than the TI dummy key that we are using for this example.
+It should be the name of the file containing the keys.
 
 .. note::
 
-    The changes only affect a72 binaries so the example just builds that
+    Generating new set of keys:
+
+    .. prompt:: bash $
 
-3. Sign the fit image and embed the dtb in uboot
+        mkdir keys
+        openssl genpkey -algorithm RSA -out keys/dev.key \
+        -pkeyopt rsa_keygen_bits:4096 -pkeyopt rsa_keygen_pubexp:65537
+        openssl req -batch -new -x509 -key keys/dev.key -out keys/dev.crt
 
-  Now once the build is done, you'll have a dtb for your board that you'll
-  be passing to mkimage for signing the fitImage and embedding the key in
-  the u-boot dtb.
+Generating the fitImage
+^^^^^^^^^^^^^^^^^^^^^^^
 
-  .. prompt:: bash $
+.. note::
+
+    For signing a secondary platform like SK boards, you'll require
+    additional steps
+
+    - Change the CONFIG_DEFAULT_DEVICE_TREE
 
-    mkimage -r -f fitImage.its -k $UBOOT_PATH/board/ti/keys -K
-    $UBOOT_PATH/build/a72/dts/dt.dtb
+        For e.g
 
-  For signing a secondary platform, pass the -K parameter to that DTB
+        .. code-block::
 
-  .. prompt:: bash $
+            diff --git a/configs/j721e_evm_a72_defconfig b/configs/j721e_evm_a72_defconfig
+            index a5c1df7e0054..6d0126d955ef 100644
+            --- a/configs/j721e_evm_a72_defconfig
+            +++ b/configs/j721e_evm_a72_defconfig
+            @@ -13,7 +13,7 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80480000
+             CONFIG_ENV_SIZE=0x20000
+             CONFIG_DM_GPIO=y
+             CONFIG_SPL_DM_SPI=y
+            -CONFIG_DEFAULT_DEVICE_TREE="k3-j721e-common-proc-board"
+            +CONFIG_DEFAULT_DEVICE_TREE="k3-j721e-sk"
+             CONFIG_SPL_TEXT_BASE=0x80080000
+             CONFIG_DM_RESET=y
+             CONFIG_SPL_MMC=y
 
-    mkimage -f fitImage.its -k $UBOOT_PATH/board/ti/keys -K
-    $UBOOT_PATH/build/a72/arch/arm/dts/k3-j721e-sk.dtb
+    - Change the binman nodes to package u-boot.dtb for the correct set of platform
 
-  .. note::
+        For e.g
 
-    If changing `CONFIG_DEFAULT_DEVICE_TREE` to the secondary platform,
-    binman changes would also be required so that correct dtb gets packaged.
+        .. code-block::
 
-    .. code-block:: bash
+            diff --git a/arch/arm/dts/k3-j721e-binman.dtsi b/arch/arm/dts/k3-j721e-binman.dtsi
+                  index 673be646b1e3..752fa805fe8d 100644
+                  --- a/arch/arm/dts/k3-j721e-binman.dtsi
+                  +++ b/arch/arm/dts/k3-j721e-binman.dtsi
+                  @@ -299,8 +299,8 @@
+                   #define SPL_J721E_SK_DTB "spl/dts/k3-j721e-sk.dtb"
 
-      diff --git a/arch/arm/dts/k3-j721e-binman.dtsi b/arch/arm/dts/k3-j721e-binman.dtsi
-      index 673be646b1e3..752fa805fe8d 100644
-      --- a/arch/arm/dts/k3-j721e-binman.dtsi
-      +++ b/arch/arm/dts/k3-j721e-binman.dtsi
-      @@ -299,8 +299,8 @@
-       #define SPL_J721E_SK_DTB "spl/dts/k3-j721e-sk.dtb"
+                   #define UBOOT_NODTB "u-boot-nodtb.bin"
+                  -#define J721E_EVM_DTB "u-boot.dtb"
+                  -#define J721E_SK_DTB "arch/arm/dts/k3-j721e-sk.dtb"
+                  +#define J721E_EVM_DTB "arch/arm/dts/k3-j721e-common-proc-board.dtb"
+                  +#define J721E_SK_DTB "u-boot.dtb"
 
-       #define UBOOT_NODTB "u-boot-nodtb.bin"
-      -#define J721E_EVM_DTB "u-boot.dtb"
-      -#define J721E_SK_DTB "arch/arm/dts/k3-j721e-sk.dtb"
-      +#define J721E_EVM_DTB "arch/arm/dts/k3-j721e-common-proc-board.dtb"
-      +#define J721E_SK_DTB "u-boot.dtb"
+This step will embed the public key in the u-boot.dtb file that was already
+built during the initial u-boot build.
 
-5. Rebuilt u-boot
+.. prompt:: bash $
 
-   This is required so that the modified dtb gets updated in u-boot.img
+    mkimage -r -f fitImage.its -k $UBOOT_PATH/board/ti/keys -K $UBOOT_PATH/build/$ARMV8/dts/dt.dtb fitImage
 
-.. include::  k3.rst
-    :start-after: .. k3_rst_include_start_build_steps_uboot
-    :end-before: .. k3_rst_include_end_build_steps_uboot
+.. note::
 
-6. (Optional) Enabled FIT_SIGNATURE_ENFORCED
+    If you have another set of keys then change the -k argument to point to
+    the folder where your keys are present, the build requires the presence
+    of both .key and .crt file.
 
-   By default u-boot will boot up the fit image without any authentication as
-   such if the public key is not embedded properly, to check if the public key
-   nodes are proper you can enable FIT_SIGNATURE_ENFORCED that would not rely
-   on the dtb for anything else then the signature node for checking the fit
-   image, rest other things will be enforced such as the property of
-   required-keys. This is not an extensive check so do manual checks also
+Build u-boot again
+^^^^^^^^^^^^^^^^^^
 
-   This is by default enabled for devices with TI_SECURE_DEVICE enabled.
+The updated u-boot.dtb needs to be packed in u-boot.img for authentication
+so rebuild U-boot ARMV8 without changing any parameters.
+Refer (:ref:`U-boot ARMV8 build <k3_rst_include_start_build_steps_uboot>`)
 
 .. note::
 
-   The devices now also have distroboot enabled so if the fit image doesn't
-   work then the fallback to normal distroboot will be there on hs devices,
-   this will need to be explicitly disabled by changing the boot_targets.
+   The devices now also have distroboot enabled so if the FIT image doesn't
+   work then the fallback to normal distroboot will be there on HS devices.
+   This will need to be explicitly disabled by changing the boot_targets to
+   disallow fallback during testing.
 
 Saving environment
 ------------------
Signature · 1 line
2.41.0
#12 lore raw

PATCH v6 8/8 docs: k3: Add secure booting documentation

In reply to Manorit Chawdhry

This commit adds a general flow to explain the usage of firewalls and the chain of trust in K3 devices.

---
 doc/board/ti/k3.rst | 45 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)
doc/board/ti/k3.rst +45 -0
index 947b86ba8292..60d04c5708be 100644
@@ -104,6 +104,51 @@ firmware can be loaded on the now free core in the wakeup domain.
 For more information on the bootup process of your SoC, consult the
 device specific boot flow documentation.
 
+Secure Boot
+^^^^^^^^^^^
+
+K3 HS-SE devices are used for authenticated boot flow with secure boot.
+HS-FS devices have optional authentication in the flow and doesn't "require"
+authentication unless converted to HS-SE devices.
+
+Chain of trust
+""""""""""""""
+
+1) SMS starts up and loads the authenticated ROM code in Wakeup Domain
+2) ROM code starts up and loads the authenticated tiboot3.bin in Wakeup
+   Domain
+3) Wakeup SPL (tiboot3.bin) would authenticate the next set of binaries
+   (ATF,OP-TEE,DM,SPL,etc.)
+4) After ATF and OP-TEE load, ARMV8 U-boot authenticates the next set of
+   binaries (Linux and DTBs) if using FIT Image authentication and having a
+   signature node in U-boot.
+
+Steps 1-3 are all authenticated by either the ROM code or TIFS as the
+authenticating entity and step 4 uses U-boot standard mechanism for
+authenticating.
+
+All the authentication that are done for ROM/TIFS are done through x509
+certificates that are signed.
+
+Firewalls
+"""""""""
+
+1) ROM comes up and sets up firewalls that are needed by itself
+2) TIFS (in multicertificate will setup it's own firewalls)
+3) R5 SPL comes along and opens up other firewalls ( that are not owned by
+   anyone - essentially firewalls that were setup by ROM but are not needed
+   anymore)
+4) Each stage beyond this: such as tispl.bin containing TFA/OPTEE uses OIDs to
+   set up firewalls to protect themselves (enforced by TIFS)
+5) TFA/OP-TEE can configure other firewalls at runtime if required as they
+   are already authenticated and firewalled off from illegal access.
+6) A53 SPL and U-boot itself startups but has no ability to change the
+   protection firewalls enforced by x509 OIDs or any other firewalls
+   configured by ROM/TIFS in the beginning.
+
+Futhur, firewalls have a lockdown bit in hardware that enforces the setting
+(and cannot be over-ridden) till the full system is resetted.
+
 Software Sources
 ----------------
 
Signature · 1 line
2.41.0
#13 lore raw

Re: [PATCH v6 8/8] docs: k3: Add secure booting documentation

Quoted 13 lines · Manorit Chawdhry

This commit adds a general flow to explain the usage of firewalls and the chain of trust in K3 devices.

---
  doc/board/ti/k3.rst | 45 +++++++++++++++++++++++++++++++++++++++++++++
  1 file changed, 45 insertions(+)
doc/board/ti/k3.rst +0 -0
index 947b86ba8292..60d04c5708be 100644

doc/board/ti/k3.rst firmware can be loaded on the now free core in the wakeup domain. · line 110

Quoted 7 lines
doc/board/ti/k3.rst +4 -0
@@ -104,6 +104,51 @@ firmware can be loaded on the now free core in the wakeup domain.
  For more information on the bootup process of your SoC, consult the
  device specific boot flow documentation.
 
+Secure Boot
+^^^^^^^^^^^
+
+K3 HS-SE devices are used for authenticated boot flow with secure boot.

How about:

K3 HS-SE devices enforce an authenticated boot flow for secure boot.

doc/board/ti/k3.rst firmware can be loaded on the now free core in the wakeup domain. · line 112

Quoted 2 lines
doc/board/ti/k3.rst +2 -0
+HS-FS devices have optional authentication in the flow and doesn't "require"
+authentication unless converted to HS-SE devices.

HS-FS is the state of a K3 device before it has been eFused with customer security keys. In the HS-FS state the authentication still can function as in HS-SE but as there are no customer keys to verify the signatures against the authentication will pass for certificates signed with any key.

doc/board/ti/k3.rst firmware can be loaded on the now free core in the wakeup domain. · line 124

Quoted 12 lines
doc/board/ti/k3.rst +12 -0
+
+Chain of trust
+""""""""""""""
+
+1) SMS starts up and loads the authenticated ROM code in Wakeup Domain
+2) ROM code starts up and loads the authenticated tiboot3.bin in Wakeup
+   Domain
+3) Wakeup SPL (tiboot3.bin) would authenticate the next set of binaries
+   (ATF,OP-TEE,DM,SPL,etc.)
+4) After ATF and OP-TEE load, ARMV8 U-boot authenticates the next set of
+   binaries (Linux and DTBs) if using FIT Image authentication and having a
+   signature node in U-boot.

This might be better said like this:

1) Public ROM loads the tiboot3.bin (R5 SPL, TIFS)
2) R5 SPL loads tispl.bin (ATF, OP-TEE, DM, SPL)
3) SPL loads u-boot.img (U-Boot)
4) U-Boot loads fitImage (Linux and DTBs)

Each stage authenticating (and optionally decrypting) while loading is implied by the following sentences below, no need to repeat each time.

Plus the use of "ROM" is confusing, we have two ROMs in K3 (Secure ROM and Public ROM), you should always be specific.

doc/board/ti/k3.rst firmware can be loaded on the now free core in the wakeup domain. · line 126

Quoted 2 lines
doc/board/ti/k3.rst +2 -0
+
+Steps 1-3 are all authenticated by either the ROM code or TIFS as the

s/ROM code/Secure ROM

doc/board/ti/k3.rst firmware can be loaded on the now free core in the wakeup domain. · line 136

Quoted 10 lines
doc/board/ti/k3.rst +10 -0
+authenticating entity and step 4 uses U-boot standard mechanism for
+authenticating.
+
+All the authentication that are done for ROM/TIFS are done through x509
+certificates that are signed.
+
+Firewalls
+"""""""""
+
+1) ROM comes up and sets up firewalls that are needed by itself

Secure ROM

doc/board/ti/k3.rst firmware can be loaded on the now free core in the wakeup domain. · line 137

Quoted 1 line
doc/board/ti/k3.rst +1 -0
+2) TIFS (in multicertificate will setup it's own firewalls)

TIFS sets up it's own firewalls in either case.

doc/board/ti/k3.rst firmware can be loaded on the now free core in the wakeup domain. · line 140

Quoted 3 lines
doc/board/ti/k3.rst +3 -0
+3) R5 SPL comes along and opens up other firewalls ( that are not owned by
+   anyone - essentially firewalls that were setup by ROM but are not needed
+   anymore)

How about:

3) R5 SPL will remove any firewalls that are leftover from the Secure ROM stage that are no longer required.

doc/board/ti/k3.rst firmware can be loaded on the now free core in the wakeup domain. · line 147

Quoted 7 lines
doc/board/ti/k3.rst +7 -0
+4) Each stage beyond this: such as tispl.bin containing TFA/OPTEE uses OIDs to
+   set up firewalls to protect themselves (enforced by TIFS)
+5) TFA/OP-TEE can configure other firewalls at runtime if required as they
+   are already authenticated and firewalled off from illegal access.
+6) A53 SPL and U-boot itself startups but has no ability to change the
+   protection firewalls enforced by x509 OIDs or any other firewalls
+   configured by ROM/TIFS in the beginning.

6) All later stages can setup or remove firewalls that have not been already configured by previous stages, such as those created by TIFS, TFA, and OP-TEE.

doc/board/ti/k3.rst firmware can be loaded on the now free core in the wakeup domain. · line 150

Quoted 3 lines
doc/board/ti/k3.rst +3 -0
+
+Futhur, firewalls have a lockdown bit in hardware that enforces the setting
+(and cannot be over-ridden) till the full system is resetted.

s/till/until
s/resetted/reset

Andrew

Quoted 5 lines
doc/board/ti/k3.rst +1 -0
+
  Software Sources
  ----------------
 
#14 lore raw

Re: [PATCH v6 8/8] docs: k3: Add secure booting documentation

Hi Andrew,

Quoted 103 lines · Andrew Davis
Quoted 13 lines · Manorit Chawdhry

This commit adds a general flow to explain the usage of firewalls and the chain of trust in K3 devices.

---
  doc/board/ti/k3.rst | 45 +++++++++++++++++++++++++++++++++++++++++++++
  1 file changed, 45 insertions(+)
doc/board/ti/k3.rst +0 -0
index 947b86ba8292..60d04c5708be 100644

doc/board/ti/k3.rst firmware can be loaded on the now free core in the wakeup domain. · line 109

Quoted 6 lines
doc/board/ti/k3.rst +4 -0
@@ -104,6 +104,51 @@ firmware can be loaded on the now free core in the wakeup domain.
  For more information on the bootup process of your SoC, consult the
  device specific boot flow documentation.
+Secure Boot
+^^^^^^^^^^^
+
+K3 HS-SE devices are used for authenticated boot flow with secure boot.

How about:

K3 HS-SE devices enforce an authenticated boot flow for secure boot.

doc/board/ti/k3.rst firmware can be loaded on the now free core in the wakeup domain. · line 112

Quoted 2 lines
doc/board/ti/k3.rst +2 -0
+HS-FS devices have optional authentication in the flow and doesn't "require"
+authentication unless converted to HS-SE devices.

HS-FS is the state of a K3 device before it has been eFused with customer security keys. In the HS-FS state the authentication still can function as in HS-SE but as there are no customer keys to verify the signatures against the authentication will pass for certificates signed with any key.

doc/board/ti/k3.rst firmware can be loaded on the now free core in the wakeup domain. · line 124

Quoted 12 lines
doc/board/ti/k3.rst +12 -0
+
+Chain of trust
+""""""""""""""
+
+1) SMS starts up and loads the authenticated ROM code in Wakeup Domain
+2) ROM code starts up and loads the authenticated tiboot3.bin in Wakeup
+   Domain
+3) Wakeup SPL (tiboot3.bin) would authenticate the next set of binaries
+   (ATF,OP-TEE,DM,SPL,etc.)
+4) After ATF and OP-TEE load, ARMV8 U-boot authenticates the next set of
+   binaries (Linux and DTBs) if using FIT Image authentication and having a
+   signature node in U-boot.

This might be better said like this:

1) Public ROM loads the tiboot3.bin (R5 SPL, TIFS)
2) R5 SPL loads tispl.bin (ATF, OP-TEE, DM, SPL)
3) SPL loads u-boot.img (U-Boot)
4) U-Boot loads fitImage (Linux and DTBs)

Each stage authenticating (and optionally decrypting) while loading is implied by the following sentences below, no need to repeat each time.

Plus the use of "ROM" is confusing, we have two ROMs in K3 (Secure ROM and Public ROM), you should always be specific.

doc/board/ti/k3.rst firmware can be loaded on the now free core in the wakeup domain. · line 125

Quoted 2 lines
doc/board/ti/k3.rst +2 -0
+
+Steps 1-3 are all authenticated by either the ROM code or TIFS as the

s/ROM code/Secure ROM

doc/board/ti/k3.rst firmware can be loaded on the now free core in the wakeup domain. · line 136

Quoted 10 lines
doc/board/ti/k3.rst +10 -0
+authenticating entity and step 4 uses U-boot standard mechanism for
+authenticating.
+
+All the authentication that are done for ROM/TIFS are done through x509
+certificates that are signed.
+
+Firewalls
+"""""""""
+
+1) ROM comes up and sets up firewalls that are needed by itself

Secure ROM

doc/board/ti/k3.rst firmware can be loaded on the now free core in the wakeup domain. · line 137

Quoted 1 line
doc/board/ti/k3.rst +1 -0
+2) TIFS (in multicertificate will setup it's own firewalls)

TIFS sets up it's own firewalls in either case.

doc/board/ti/k3.rst firmware can be loaded on the now free core in the wakeup domain. · line 140

Quoted 3 lines
doc/board/ti/k3.rst +3 -0
+3) R5 SPL comes along and opens up other firewalls ( that are not owned by
+   anyone - essentially firewalls that were setup by ROM but are not needed
+   anymore)

How about:

3) R5 SPL will remove any firewalls that are leftover from the Secure ROM stage that are no longer required.

doc/board/ti/k3.rst firmware can be loaded on the now free core in the wakeup domain. · line 147

Quoted 7 lines
doc/board/ti/k3.rst +7 -0
+4) Each stage beyond this: such as tispl.bin containing TFA/OPTEE uses OIDs to
+   set up firewalls to protect themselves (enforced by TIFS)
+5) TFA/OP-TEE can configure other firewalls at runtime if required as they
+   are already authenticated and firewalled off from illegal access.
+6) A53 SPL and U-boot itself startups but has no ability to change the
+   protection firewalls enforced by x509 OIDs or any other firewalls
+   configured by ROM/TIFS in the beginning.

6) All later stages can setup or remove firewalls that have not been already configured by previous stages, such as those created by TIFS, TFA, and OP-TEE.

Quoted 7 lines

doc/board/ti/k3.rst firmware can be loaded on the now free core in the wakeup domain. · line 150

Quoted 3 lines
doc/board/ti/k3.rst +3 -0
+
+Futhur, firewalls have a lockdown bit in hardware that enforces the setting
+(and cannot be over-ridden) till the full system is resetted.

s/till/until
s/resetted/reset

Have incorporated the suggested changes, Thanks!

Regards,
Manorit

Quoted 6 lines

Andrew

Quoted 4 lines
doc/board/ti/k3.rst +1 -0
+
  Software Sources
  ----------------