Skip to contentSkip to conversation

DRM driver for verisilicon

PATCH NAK Keith Zhao 11 participants 55 messages Dec 4, 2023 – May 16, 2024 Page 1 of 2

Subsystems (8)
lore
Share & tools
lore

Keith Zhao

author
#0 lore raw

v3 cover DRM driver for verisilicon

This patch is a drm driver for Starfive Soc JH7110, I am sending Drm driver part and HDMI driver part.

We used GEM framework for buffer management,
and for buffer allocation,we use DMA APIs.

the Starfive HDMI servers as interface between a LCD Controller and a HDMI bus.
A HDMI TX consists of one HDMI transmitter controller and one HDMI transmitter PHY.
(Sound support is not include in this patch)

This patchset should be applied on next branch.

V1:
Changes since v1:
- Further standardize the yaml file.
- Dts naming convention improved.
- Fix the problem of compiling and loading ko files.
- Use drm new api to automatically manage resources.
- Drop vs_crtc_funcs&vs_plane_funcs, subdivide the plane's help interface.
- Reduce the modifiers unused.
- Optimize the hdmi driver code

V2:
Changes since v2:
- fix the error about checking the yaml file.
- match drm driver GEM DMA API.
- Delete the custom crtc property .
- hdmi use drmm_ new api to automatically manage resources.
- update the modifiers comments.
- enabling KASAN, fix the error during removing module

V3:
Changes since v3:
- Delete the custom plane property.
- Delete the custom fourcc modifiers.
- Adjust the calculation mode of hdmi pixclock.
- Add match data for dc8200 driver.
- Adjust some magic values.
- Add a simple encoder for dsi output.

Keith Zhao (6):
dt-bindings: display: Add yamls for JH7110 display system
riscv: dts: starfive: jh7110: display subsystem drm/vs: Register DRM device
drm/vs: Add KMS crtc&plane
drm/vs: Add hdmi driver
drm/vs: simple encoder

 .../starfive/starfive,display-subsystem.yaml  |  104 ++
 .../starfive/starfive,dsi-encoder.yaml        |   92 ++
 .../starfive/starfive,jh7110-dc8200.yaml      |  113 ++
 .../starfive/starfive,jh7110-inno-hdmi.yaml   |   82 ++
 .../soc/starfive/starfive,jh7110-syscon.yaml  |    1 +
 MAINTAINERS                                   |    8 +
 .../jh7110-starfive-visionfive-2.dtsi         |  134 ++
 arch/riscv/boot/dts/starfive/jh7110.dtsi      |   49 +
 drivers/gpu/drm/Kconfig                       |    2 +
 drivers/gpu/drm/Makefile                      |    1 +
 drivers/gpu/drm/verisilicon/Kconfig           |   21 +
 drivers/gpu/drm/verisilicon/Makefile          |   12 +
 drivers/gpu/drm/verisilicon/starfive_hdmi.c   |  849 ++++++++++++
 drivers/gpu/drm/verisilicon/starfive_hdmi.h   |  304 +++++
 drivers/gpu/drm/verisilicon/vs_crtc.c         |  208 +++
 drivers/gpu/drm/verisilicon/vs_crtc.h         |   42 +
 drivers/gpu/drm/verisilicon/vs_dc.c           | 1192 +++++++++++++++++
 drivers/gpu/drm/verisilicon/vs_dc.h           |   67 +
 drivers/gpu/drm/verisilicon/vs_dc_hw.c        | 1022 ++++++++++++++
 drivers/gpu/drm/verisilicon/vs_dc_hw.h        |  580 ++++++++
 drivers/gpu/drm/verisilicon/vs_drv.c          |  323 +++++
 drivers/gpu/drm/verisilicon/vs_drv.h          |   46 +
 drivers/gpu/drm/verisilicon/vs_modeset.c      |   39 +
 drivers/gpu/drm/verisilicon/vs_modeset.h      |   10 +
 drivers/gpu/drm/verisilicon/vs_plane.c        |  301 +++++
 drivers/gpu/drm/verisilicon/vs_plane.h        |   39 +
 drivers/gpu/drm/verisilicon/vs_simple_enc.c   |  195 +++
 drivers/gpu/drm/verisilicon/vs_simple_enc.h   |   23 +
 drivers/gpu/drm/verisilicon/vs_type.h         |   69 +
 29 files changed, 5928 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,display-subsystem.yaml
 create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,dsi-encoder.yaml
 create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.yaml
 create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml
 create mode 100644 drivers/gpu/drm/verisilicon/Kconfig
 create mode 100644 drivers/gpu/drm/verisilicon/Makefile
 create mode 100644 drivers/gpu/drm/verisilicon/starfive_hdmi.c
 create mode 100644 drivers/gpu/drm/verisilicon/starfive_hdmi.h
 create mode 100644 drivers/gpu/drm/verisilicon/vs_crtc.c
 create mode 100644 drivers/gpu/drm/verisilicon/vs_crtc.h
 create mode 100644 drivers/gpu/drm/verisilicon/vs_dc.c
 create mode 100644 drivers/gpu/drm/verisilicon/vs_dc.h
 create mode 100644 drivers/gpu/drm/verisilicon/vs_dc_hw.c
 create mode 100644 drivers/gpu/drm/verisilicon/vs_dc_hw.h
 create mode 100644 drivers/gpu/drm/verisilicon/vs_drv.c
 create mode 100644 drivers/gpu/drm/verisilicon/vs_drv.h
 create mode 100644 drivers/gpu/drm/verisilicon/vs_modeset.c
 create mode 100644 drivers/gpu/drm/verisilicon/vs_modeset.h
 create mode 100644 drivers/gpu/drm/verisilicon/vs_plane.c
 create mode 100644 drivers/gpu/drm/verisilicon/vs_plane.h
 create mode 100644 drivers/gpu/drm/verisilicon/vs_simple_enc.c
 create mode 100644 drivers/gpu/drm/verisilicon/vs_simple_enc.h
 create mode 100644 drivers/gpu/drm/verisilicon/vs_type.h
Signature · 1 line
2.34.1
author
#1 lore raw

PATCH v3 1/6 dt-bindings: display: Add yamls for JH7110 display system

StarFive SoCs JH7110 display system:
dc controller, hdmi controller,
encoder, vout syscon.

add the path of yaml file in MAINTAINERS

---
 .../starfive/starfive,display-subsystem.yaml  | 104 ++++++++++++++++
 .../starfive/starfive,dsi-encoder.yaml        |  92 ++++++++++++++
 .../starfive/starfive,jh7110-dc8200.yaml      | 113 ++++++++++++++++++
 .../starfive/starfive,jh7110-inno-hdmi.yaml   |  82 +++++++++++++
 .../soc/starfive/starfive,jh7110-syscon.yaml  |   1 +
 MAINTAINERS                                   |   7 ++
 6 files changed, 399 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,display-subsystem.yaml
 create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,dsi-encoder.yaml
 create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.yaml
 create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml
Documentation/devicetree/bindings/display/starfive/starfive,display-subsystem.yaml new file +104 -0
new file mode 100644
index 000000000000..d5ebdba3fb36
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/starfive/starfive,display-subsystem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Starfive JH7110 Soc Display SubSystem
+
+maintainers:
+  - Keith Zhao <[email protected]>
+  - ShengYang Chen <[email protected]>
+
+description:
+  This is the bindings documentation for the JH7110 Soc Display Subsystem that
+  includes front-end video data capture, display controller and display
+  interface. such as HDMI and MIPI.
+
+  JH7110 display pipeline have several components as below description,
+  multi display controllers and corresponding physical interfaces.
+  For different display scenarios, pipe0 and pipe1 maybe binding to different
+  encoder. for example,
+
+  pipe0 binding to HDMI for primary display,
+  pipe1 binding to DSI for external display.
+
+          +------------------------------+
+          |                              |
+          |                              |
+  +----+  |   +-------------------+      |   +-------+   +------+   +------+
+  |    +----->+  dc controller 0  +--->----->+HDMICtl| ->+ PHY  +-->+PANEL0+
+  |AXI |  |   +-------------------+      |   +-------+   +------+   +------+
+  |    |  |                              |
+  |    |  |                              |
+  |    |  |                              |
+  |    |  |                              |
+  |APB |  |   +-------------------+         +---------+    +------+  +-------+
+  |    +----->+  dc controller 1  +--->---->+ dsiTx   +--->+DPHY  +->+ PANEL1+
+  |    |  |   +-------------------+         +---------+    +------+  +-------+
+  +----+  |                              |
+          +------------------------------+
+
+
+properties:
+  compatible:
+    const: starfive,display-subsystem
+
+  clocks:
+    items:
+      - description: Clock for display system noc bus.
+      - description: Core clock for display controller.
+      - description: Clock for axi bus to access ddr.
+      - description: Clock for ahb bus to R/W the phy regs.
+
+  clock-names:
+    items:
+      - const: noc_bus
+      - const: dc_core
+      - const: axi_core
+      - const: ahb
+
+  resets:
+    items:
+      - description: Reset for axi bus.
+      - description: Reset for ahb bus.
+      - description: Core reset of display controller.
+
+  reset-names:
+    items:
+      - const: axi
+      - const: ahb
+      - const: core
+
+  ports:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    description:
+      Should contain a list of phandles pointing to display interface port
+      of dc-controller devices.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    display-subsystem {
+        compatible = "starfive,display-subsystem";
+        ports = <&dc_out>;
+
+        clocks = <&syscrg 60>,
+               <&voutcrg 4>,
+               <&voutcrg 5>,
+               <&voutcrg 6>;
+        clock-names = "noc_bus", "dc_core", "axi_core", "ahb";
+        resets = <&voutcrg 0>, <&voutcrg 1>, <&voutcrg 2>;
+        reset-names = "axi", "ahb", "core";
+    };
Documentation/devicetree/bindings/display/starfive/starfive,dsi-encoder.yaml new file +92 -0

92 lines not on this page · raw message

Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.yaml new file +113 -0

113 lines not on this page · raw message

Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml new file +82 -0

82 lines not on this page · raw message

Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml +1 -0
index 0039319e91fe..cf9b657d0e8a 100644
@@ -24,6 +24,7 @@ properties:
           - enum:
               - starfive,jh7110-aon-syscon
               - starfive,jh7110-stg-syscon
+              - starfive,jh7110-vout-syscon
           - const: syscon
 
   reg:
MAINTAINERS +7 -0
index 7b151710e8c5..7caaadb83f3f 100644
@@ -6881,6 +6881,13 @@ T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	Documentation/devicetree/bindings/display/ste,mcde.yaml
 F:	drivers/gpu/drm/mcde/
 
+DRM DRIVERS FOR STARFIVE
+M:	Keith Zhao <[email protected]>
+L:	[email protected]
+S:	Maintained
+T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	Documentation/devicetree/bindings/display/starfive/
+
 DRM DRIVER FOR TI DLPC3433 MIPI DSI TO DMD BRIDGE
 M:	Jagan Teki <[email protected]>
 S:	Maintained
Signature · 1 line
2.34.1
#2 lore raw

Re: [v3 1/6] dt-bindings: display: Add yamls for JH7110 display system

Quoted 3 lines · Keith Zhao

StarFive SoCs JH7110 display system:
dc controller, hdmi controller,
encoder, vout syscon.

Nothing improved here.

Quoted 2 lines

add the path of yaml file in MAINTAINERS

Neither here - still these are not proper sentences and wrapping is wrong.

Please wrap commit message according to Linux coding style / submission process (neither too early nor over the limit):
https://elixir.bootlin.com/linux/v6.4-rc1/source/Documentation/process/submitting-patches.rst#L597

Quoted 25 lines
---
 .../starfive/starfive,display-subsystem.yaml  | 104 ++++++++++++++++
 .../starfive/starfive,dsi-encoder.yaml        |  92 ++++++++++++++
 .../starfive/starfive,jh7110-dc8200.yaml      | 113 ++++++++++++++++++
 .../starfive/starfive,jh7110-inno-hdmi.yaml   |  82 +++++++++++++
 .../soc/starfive/starfive,jh7110-syscon.yaml  |   1 +
 MAINTAINERS                                   |   7 ++
 6 files changed, 399 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,display-subsystem.yaml
 create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,dsi-encoder.yaml
 create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.yaml
 create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml
Documentation/devicetree/bindings/display/starfive/starfive,display-subsystem.yaml new file +4 -0
new file mode 100644
index 000000000000..d5ebdba3fb36
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/starfive/starfive,display-subsystem.yaml#

Documentation/devicetree/bindings/display/starfive/starfive,display-subsystem.yaml line 14

Quoted 10 lines
Documentation/devicetree/bindings/display/starfive/starfive,display-subsystem.yaml new file +10 -0
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Starfive JH7110 Soc Display SubSystem
+
+maintainers:
+  - Keith Zhao <[email protected]>
+  - ShengYang Chen <[email protected]>
+
+description:
+  This is the bindings documentation for the JH7110 Soc Display Subsystem that

Drop "This is the bindings documentation for " because it is obvious. It cannot be anything else.

Quoted 50 lines
Documentation/devicetree/bindings/display/starfive/starfive,display-subsystem.yaml new file +50 -0
+  includes front-end video data capture, display controller and display
+  interface. such as HDMI and MIPI.
+
+  JH7110 display pipeline have several components as below description,
+  multi display controllers and corresponding physical interfaces.
+  For different display scenarios, pipe0 and pipe1 maybe binding to different
+  encoder. for example,
+
+  pipe0 binding to HDMI for primary display,
+  pipe1 binding to DSI for external display.
+
+          +------------------------------+
+          |                              |
+          |                              |
+  +----+  |   +-------------------+      |   +-------+   +------+   +------+
+  |    +----->+  dc controller 0  +--->----->+HDMICtl| ->+ PHY  +-->+PANEL0+
+  |AXI |  |   +-------------------+      |   +-------+   +------+   +------+
+  |    |  |                              |
+  |    |  |                              |
+  |    |  |                              |
+  |    |  |                              |
+  |APB |  |   +-------------------+         +---------+    +------+  +-------+
+  |    +----->+  dc controller 1  +--->---->+ dsiTx   +--->+DPHY  +->+ PANEL1+
+  |    |  |   +-------------------+         +---------+    +------+  +-------+
+  +----+  |                              |
+          +------------------------------+
+
+
+properties:
+  compatible:
+    const: starfive,display-subsystem
+
+  clocks:
+    items:
+      - description: Clock for display system noc bus.
+      - description: Core clock for display controller.
+      - description: Clock for axi bus to access ddr.
+      - description: Clock for ahb bus to R/W the phy regs.
+
+  clock-names:
+    items:
+      - const: noc_bus
+      - const: dc_core
+      - const: axi_core
+      - const: ahb
+
+  resets:
+    items:
+      - description: Reset for axi bus.
+      - description: Reset for ahb bus.

Documentation/devicetree/bindings/display/starfive/starfive,display-subsystem.yaml line 74

Quoted 10 lines
Documentation/devicetree/bindings/display/starfive/starfive,display-subsystem.yaml new file +10 -0
+      - description: Core reset of display controller.
+
+  reset-names:
+    items:
+      - const: axi
+      - const: ahb
+      - const: core
+
+  ports:
+    $ref: /schemas/types.yaml#/definitions/phandle-array

NAK, you just ignored my comments. More than once in this patchset.

I stop review. You must implement entire feedback or respond to it. Especially when ignoring feedback results in buggy code.

Best regards,
Krzysztof

#3 lore raw

Re: [v3 1/6] dt-bindings: display: Add yamls for JH7110 display system

In reply to Keith Zhao

Hi,

Quoted 353 lines · Keith Zhao

StarFive SoCs JH7110 display system:
dc controller, hdmi controller,
encoder, vout syscon.

add the path of yaml file in MAINTAINERS

---
  .../starfive/starfive,display-subsystem.yaml  | 104 ++++++++++++++++
  .../starfive/starfive,dsi-encoder.yaml        |  92 ++++++++++++++
  .../starfive/starfive,jh7110-dc8200.yaml      | 113 ++++++++++++++++++
  .../starfive/starfive,jh7110-inno-hdmi.yaml   |  82 +++++++++++++
  .../soc/starfive/starfive,jh7110-syscon.yaml  |   1 +
  MAINTAINERS                                   |   7 ++
  6 files changed, 399 insertions(+)

create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,display-subsystem.yaml create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,dsi-encoder.yaml create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.yaml create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml

Documentation/devicetree/bindings/display/starfive/starfive,display-subsystem.yaml new file +104 -0
new file mode 100644
index 000000000000..d5ebdba3fb36
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/starfive/starfive,display-subsystem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Starfive JH7110 Soc Display SubSystem
+
+maintainers:
+  - Keith Zhao <[email protected]>
+  - ShengYang Chen <[email protected]>
+
+description:
+  This is the bindings documentation for the JH7110 Soc Display Subsystem that
+  includes front-end video data capture, display controller and display
+  interface. such as HDMI and MIPI.
+
+  JH7110 display pipeline have several components as below description,
+  multi display controllers and corresponding physical interfaces.
+  For different display scenarios, pipe0 and pipe1 maybe binding to different
+  encoder. for example,
+
+  pipe0 binding to HDMI for primary display,
+  pipe1 binding to DSI for external display.
+
+          +------------------------------+
+          |                              |
+          |                              |
+  +----+  |   +-------------------+      |   +-------+   +------+   +------+
+  |    +----->+  dc controller 0  +--->----->+HDMICtl| ->+ PHY  +-->+PANEL0+
+  |AXI |  |   +-------------------+      |   +-------+   +------+   +------+
+  |    |  |                              |
+  |    |  |                              |
+  |    |  |                              |
+  |    |  |                              |
+  |APB |  |   +-------------------+         +---------+    +------+  +-------+
+  |    +----->+  dc controller 1  +--->---->+ dsiTx   +--->+DPHY  +->+ PANEL1+
+  |    |  |   +-------------------+         +---------+    +------+  +-------+
+  +----+  |                              |
+          +------------------------------+
+
+
+properties:
+  compatible:
+    const: starfive,display-subsystem
+
+  clocks:
+    items:
+      - description: Clock for display system noc bus.
+      - description: Core clock for display controller.
+      - description: Clock for axi bus to access ddr.
+      - description: Clock for ahb bus to R/W the phy regs.
+
+  clock-names:
+    items:
+      - const: noc_bus
+      - const: dc_core
+      - const: axi_core
+      - const: ahb
+
+  resets:
+    items:
+      - description: Reset for axi bus.
+      - description: Reset for ahb bus.
+      - description: Core reset of display controller.
+
+  reset-names:
+    items:
+      - const: axi
+      - const: ahb
+      - const: core
+
+  ports:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    description:
+      Should contain a list of phandles pointing to display interface port
+      of dc-controller devices.
+
+required:
+  - compatible
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    display-subsystem {
+        compatible = "starfive,display-subsystem";
+        ports = <&dc_out>;
+
+        clocks = <&syscrg 60>,
+               <&voutcrg 4>,
+               <&voutcrg 5>,
+               <&voutcrg 6>;
+        clock-names = "noc_bus", "dc_core", "axi_core", "ahb";
+        resets = <&voutcrg 0>, <&voutcrg 1>, <&voutcrg 2>;
+        reset-names = "axi", "ahb", "core";
+    };
Documentation/devicetree/bindings/display/starfive/starfive,dsi-encoder.yaml new file +92 -0
new file mode 100644
index 000000000000..2cc0ad8e65ba
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/starfive/starfive,dsi-encoder.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: starfive jh7110 soc Encoder
+
+maintainers:
+  - Keith Zhao <[email protected]>
+
+description:
+  Device-Tree bindings for simple encoder.
+  Simple encoder driver only has basic functionality.
+  the hardware of dc8200 has 2 output interface, use
+  syscon to select which one to be used.
+
+properties:
+  compatible:
+    const: starfive,dsi-encoder
+
+  starfive,syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to syscon that select crtc output.
+          - description: Offset of crtc selection
+          - description: Shift of crtc selection
+    description:
+      A phandle to syscon with two arguments that configure select output.
+      The argument one is the offset of crtc selection, the
+      argument two is the shift of crtc selection.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          The first port should be the input coming from the associated dc channel.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          The second port should be the output coming from the associated bridge.
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+        dssctrl: dssctrl@295b0000 {
+            compatible = "starfive,jh7110-vout-syscon", "syscon";
+            reg = <0x295b0000 0x90>;
+        };
+
+        dsi_encoder: dsi_encoder {
+            compatible = "starfive,dsi-encoder";
+            starfive,syscon = <&dssctrl 0x8 0x12>;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                /* input */
+                port@0 {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    reg = <0>;
+                    dsi_input0:endpoint@0 {
+                        reg = <0>;
+                        remote-endpoint = <&dc_out_dpi1>;
+                    };
+                };
+                /* output */
+                port@1 {
+                    reg = <1>;
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+                    dsi_out:endpoint {
+                        remote-endpoint = <&mipi_in>;
+                    };
+                };
+            };
+        };
Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.yaml new file +113 -0
new file mode 100644
index 000000000000..0b083effec02
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/starfive/starfive,jh7110-dc8200.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive display controller
+
+description:
+  The StarFive SoC uses the display controller based on Verisilicon IP
+  to transfer the image data from a video memory buffer to an external
+  LCD interface.
+
+maintainers:
+  - Keith Zhao <[email protected]>
+
+properties:
+  compatible:
+    const: starfive,jh7110-dc8200
+
+  reg:
+    minItems: 1
+    items:
+      - description:
+          host interface
+      - description:
+          display physical base address and length.
+
+  interrupts:
+    items:
+      - description: The interrupt will be generated when DC finish one frame
+
+  clocks:
+    items:
+      - description: Pixel clock for display channel 0.
+      - description: Pixel clock for display channel 1.
+      - description: Pixel clock from hdmi.
+      - description: Pixel clock for soc .
+  clock-names:
+    items:
+      - const: channel0
+      - const: channel1
+      - const: hdmi_tx
+      - const: dc_parent
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          channel 0 output
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          channel 1 output
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    dc8200: lcd-controller@29400000 {
+        compatible = "starfive,jh7110-dc8200";
+        reg = <0x29400000 0x100>, <0x29400800 0x2000>;
+        interrupts = <95>;
+        clocks = <&voutcrg 7>,
+               <&voutcrg 8>,
+               <&voutcrg 9>,
+               <&voutcrg 10>;
+        clock-names = "channel0", "channel1","hdmi_tx", "dc_parent";
+
+        crtc_out: ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            dc_out0: port@0 {
+                reg = <0>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                dc_out_dpi0: endpoint@0 {
+                    reg = <0>;
+                    remote-endpoint = <&hdmi_in_dc>;
+                };
+
+            };
+
+            dc_out1: port@1 {
+                reg = <1>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                dc_out_dpi1: endpoint@1 {
+                    reg = <1>;
+                    remote-endpoint = <&dsi_input0>;
+                };
+
+            };
+          };
+    };
Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml new file +0 -0
new file mode 100644
index 000000000000..3640d97ab789

Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml line 10

Quoted 10 lines
Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml new file +10 -0
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/starfive/starfive,jh7110-inno-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Starfive JH7110 HDMI controller
+
+description:
+  The StarFive JH7110 SoC uses the HDMI signal transmiter based on innosilicon IP

'transmiter' -> 'transmitter'

Quoted 102 lines
Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml new file +72 -0
+  to generate HDMI signal from its input and transmit the signal to the screen.
+
+maintainers:
+  - Keith Zhao <[email protected]>
+
+properties:
+  compatible:
+    const: "starfive,jh7110-inno-hdmi"
+
+  reg:
+    minItems: 1
+
+  interrupts:
+    items:
+      - description: The HDMI hot plug detection interrupt.
+
+  clocks:
+    items:
+      - description: System clock of HDMI module.
+      - description: Mclk clock of HDMI audio.
+      - description: Bclk clock of HDMI audio.
+
+  clock-names:
+    items:
+      - const: sysclk
+      - const: mclk
+      - const: bclk
+
+  resets:
+    maxItems: 1
+
+  '#sound-dai-cells':
+    const: 0
+
+  port:
+    $ref: /schemas/graph.yaml#/properties/port
+    description:
+      Should contain a remote endpoint phandle of display controller device.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - '#sound-dai-cells'
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    hdmi: hdmi@29590000 {
+        compatible = "starfive,jh7110-inno-hdmi";
+        reg = <0x29590000 0x4000>;
+        interrupts = <99>;
+        clocks = <&voutcrg 17>,
+               <&voutcrg 15>,
+               <&voutcrg 16>;
+        clock-names = "sysclk", "mclk","bclk";
+        resets = <&voutcrg 9>;
+        #sound-dai-cells = <0>;
+        hdmi_in: port {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            hdmi_in_dc: endpoint@0 {
+                reg = <0>;
+                remote-endpoint = <&dc_out_hdmi>;
+            };
+        };
+    };
Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml +1 -0
index 0039319e91fe..cf9b657d0e8a 100644
@@ -24,6 +24,7 @@ properties:
            - enum:
                - starfive,jh7110-aon-syscon
                - starfive,jh7110-stg-syscon
+              - starfive,jh7110-vout-syscon
            - const: syscon
 
    reg:
MAINTAINERS +7 -0
index 7b151710e8c5..7caaadb83f3f 100644
@@ -6881,6 +6881,13 @@ T:	git git://anongit.freedesktop.org/drm/drm-misc
  F:	Documentation/devicetree/bindings/display/ste,mcde.yaml
  F:	drivers/gpu/drm/mcde/
 
+DRM DRIVERS FOR STARFIVE
+M:	Keith Zhao <[email protected]>
+L:	[email protected]
+S:	Maintained
+T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	Documentation/devicetree/bindings/display/starfive/
+
  DRM DRIVER FOR TI DLPC3433 MIPI DSI TO DMD BRIDGE
  M:	Jagan Teki <[email protected]>
  S:	Maintained
maintainer
#4 lore raw

Re: [v3 1/6] dt-bindings: display: Add yamls for JH7110 display system

Quoted 7 lines · Sui Jingfeng

Hi,

Quoted 3 lines · Keith Zhao

StarFive SoCs JH7110 display system:
dc controller, hdmi controller,
encoder, vout syscon.

[...]

Quoted 4 lines

Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml line 10

Quoted 2 lines
Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml new file +2 -0
+description:
+  The StarFive JH7110 SoC uses the HDMI signal transmiter based on innosilicon IP

'transmiter' -> 'transmitter'

Thank you for reviewing, but please trim your replies especially when it is only 1 line reply in the middle of 100s of lines.

Rob

maintainer
#5 lore raw

Re: [v3 1/6] dt-bindings: display: Add yamls for JH7110 display system

In reply to Keith Zhao
Quoted 3 lines · Keith Zhao

StarFive SoCs JH7110 display system:
dc controller, hdmi controller,
encoder, vout syscon.

What are yamls?

I prefer not using 'yaml' as yaml is lots of things that are not DT schema.

Rob

author
#6 lore raw

PATCH v3 2/6 riscv: dts: starfive: jh7110: display subsystem

In reply to Keith Zhao

Add the dc controller and hdmi node for the Starfive JH7110 SoC.

---
 .../jh7110-starfive-visionfive-2.dtsi         | 134 ++++++++++++++++++
 arch/riscv/boot/dts/starfive/jh7110.dtsi      |  49 +++++++
 2 files changed, 183 insertions(+)
arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi +134 -0
index b89e9791efa7..6e387e0138c0 100644
@@ -35,6 +35,25 @@ memory@40000000 {
 		reg = <0x0 0x40000000 0x1 0x0>;
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* vout applies for space from this CMA
+		 * Without this CMA reservation,
+		 * vout may not work properly.
+		 */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x0 0x20000000>;
+			alignment = <0x0 0x1000>;
+			alloc-ranges = <0x0 0x70000000 0x0 0x20000000>;
+			linux,cma-default;
+		};
+	};
+
 	gpio-restart {
 		compatible = "gpio-restart";
 		gpios = <&sysgpio 35 GPIO_ACTIVE_HIGH>;
@@ -69,6 +88,68 @@ codec {
 	};
 };
 
+&dc8200 {
+	status = "okay";
+
+	crtc_out: ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dc_out0: port@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dc_out_dpi0: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hdmi_enc>;
+			};
+
+		};
+
+		dc_out1: port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dc_out_dpi1: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&dsi_enc>;
+			};
+
+		};
+	};
+};
+
+&display {
+	status = "okay";
+	ports = <&crtc_out>;
+};
+
+&dsi_encoder {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		/* input */
+		enc_in: port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			dsi_enc:endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&dc_out_dpi1>;
+			};
+		};
+		/* output */
+		enc_out: port@1 {
+			reg = <1>;
+			/*need add a remote-endpoint to dsi bridge*/
+		};
+	};
+};
+
 &dvp_clk {
 	clock-frequency = <74250000>;
 };
@@ -89,6 +170,21 @@ &gmac1_rmii_refin {
 	clock-frequency = <50000000>;
 };
 
+&hdmi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_pins>;
+
+	hdmi_in: port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		hdmi_enc: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&dc_out_dpi0>;
+		};
+	};
+};
+
 &hdmitx0_pixelclk {
 	clock-frequency = <297000000>;
 };
@@ -336,6 +432,40 @@ spi_dev0: spi@0 {
 };
 
 &sysgpio {
+	hdmi_pins: hdmi-0 {
+		hdmi-cec-pins {
+			pinmux = <GPIOMUX(14, GPOUT_SYS_HDMI_CEC_SDA,
+					     GPOEN_SYS_HDMI_CEC_SDA,
+					     GPI_SYS_HDMI_CEC_SDA)>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		hdmi-hpd-pins {
+			pinmux = <GPIOMUX(15, GPOUT_HIGH,
+					     GPOEN_ENABLE,
+					     GPI_SYS_HDMI_HPD)>;
+			input-enable;
+			bias-disable; /* external pull-up */
+		};
+
+		hdmi-scl-pins {
+			pinmux = <GPIOMUX(0, GPOUT_SYS_HDMI_DDC_SCL,
+					     GPOEN_SYS_HDMI_DDC_SCL,
+					     GPI_SYS_HDMI_DDC_SCL)>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		hdmi-sda-pins {
+			pinmux = <GPIOMUX(1, GPOUT_SYS_HDMI_DDC_SDA,
+					     GPOEN_SYS_HDMI_DDC_SDA,
+					     GPI_SYS_HDMI_DDC_SDA)>;
+			input-enable;
+			bias-pull-up;
+		};
+	};
+
 	i2c0_pins: i2c0-0 {
 		i2c-pins {
 			pinmux = <GPIOMUX(57, GPOUT_LOW,
@@ -642,3 +772,7 @@ &U74_3 {
 &U74_4 {
 	cpu-supply = <&vdd_cpu>;
 };
+
+&voutcrg {
+	status = "okay";
+};
arch/riscv/boot/dts/starfive/jh7110.dtsi +49 -0

61 lines not on this page · raw message

Signature · 1 line
2.34.1
author
#7 lore raw

PATCH v3 3/6 drm/vs: Register DRM device

In reply to Keith Zhao

Implement drm device registration interface

---
 MAINTAINERS                              |   1 +
 drivers/gpu/drm/Kconfig                  |   2 +
 drivers/gpu/drm/Makefile                 |   1 +
 drivers/gpu/drm/verisilicon/Kconfig      |  13 +
 drivers/gpu/drm/verisilicon/Makefile     |   6 +
 drivers/gpu/drm/verisilicon/vs_drv.c     | 316 +++++++++++++++++++++++
 drivers/gpu/drm/verisilicon/vs_drv.h     |  42 +++
 drivers/gpu/drm/verisilicon/vs_modeset.c |  39 +++
 drivers/gpu/drm/verisilicon/vs_modeset.h |  10 +
 9 files changed, 430 insertions(+)
 create mode 100644 drivers/gpu/drm/verisilicon/Kconfig
 create mode 100644 drivers/gpu/drm/verisilicon/Makefile
 create mode 100644 drivers/gpu/drm/verisilicon/vs_drv.c
 create mode 100644 drivers/gpu/drm/verisilicon/vs_drv.h
 create mode 100644 drivers/gpu/drm/verisilicon/vs_modeset.c
 create mode 100644 drivers/gpu/drm/verisilicon/vs_modeset.h
MAINTAINERS +1 -0
index 7caaadb83f3f..8dc9ebfe4605 100644
@@ -6887,6 +6887,7 @@ L:	[email protected]
 S:	Maintained
 T:	git git://anongit.freedesktop.org/drm/drm-misc
 F:	Documentation/devicetree/bindings/display/starfive/
+F:	drivers/gpu/drm/verisilicon/
 
 DRM DRIVER FOR TI DLPC3433 MIPI DSI TO DMD BRIDGE
 M:	Jagan Teki <[email protected]>
drivers/gpu/drm/Kconfig +2 -0
index 3eee8636f847..e8d53c2e7c86 100644
@@ -394,6 +394,8 @@ source "drivers/gpu/drm/solomon/Kconfig"
 
 source "drivers/gpu/drm/sprd/Kconfig"
 
+source "drivers/gpu/drm/verisilicon/Kconfig"
+
 config DRM_HYPERV
 	tristate "DRM Support for Hyper-V synthetic video device"
 	depends on DRM && PCI && MMU && HYPERV
drivers/gpu/drm/Makefile +1 -0
index 8e1bde059170..29e04acded06 100644
@@ -198,3 +198,4 @@ obj-$(CONFIG_DRM_HYPERV) += hyperv/
 obj-y			+= solomon/
 obj-$(CONFIG_DRM_SPRD) += sprd/
 obj-$(CONFIG_DRM_LOONGSON) += loongson/
+obj-$(CONFIG_DRM_VERISILICON) += verisilicon/
drivers/gpu/drm/verisilicon/Kconfig new file +13 -0
new file mode 100644
index 000000000000..e10fa97635aa
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+config DRM_VERISILICON
+	tristate "DRM Support for VeriSilicon"
+	depends on DRM
+	select DRM_KMS_HELPER
+	select DRM_GEM_DMA_HELPER
+	select CMA
+	select DMA_CMA
+	help
+	  Choose this option if you have a VeriSilicon soc chipset.
+	  This driver provides VeriSilicon kernel mode
+	  setting and buffer management. It does not
+	  provide 2D or 3D acceleration.
drivers/gpu/drm/verisilicon/Makefile new file +6 -0
new file mode 100644
index 000000000000..d785a1dfaa7f
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+
+vs_drm-objs := vs_drv.o \
+	       vs_modeset.o
+
+obj-$(CONFIG_DRM_VERISILICON) += vs_drm.o
drivers/gpu/drm/verisilicon/vs_drv.c new file +316 -0

316 lines not on this page · raw message

drivers/gpu/drm/verisilicon/vs_drv.h new file +42 -0

42 lines not on this page · raw message

drivers/gpu/drm/verisilicon/vs_modeset.c new file +39 -0
new file mode 100644
index 000000000000..eaf406c1b7c7
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 VeriSilicon Holdings Co., Ltd.
+ */
+
+#include <linux/module.h>
+
+#include <drm/drm_damage_helper.h>
+#include <drm/drm_fb_helper.h>
+#include <drm/drm_gem_framebuffer_helper.h>
+
+#include "vs_modeset.h"
+
+static const struct drm_mode_config_funcs vs_mode_config_funcs = {
+	.fb_create			 = drm_gem_fb_create,
+	.atomic_check		 = drm_atomic_helper_check,
+	.atomic_commit		 = drm_atomic_helper_commit,
+};
+
+static struct drm_mode_config_helper_funcs vs_mode_config_helpers = {
+	.atomic_commit_tail = drm_atomic_helper_commit_tail_rpm,
+};
+
+void vs_mode_config_init(struct drm_device *dev)
+{
+	int ret;
+
+	ret = drmm_mode_config_init(dev);
+	if (ret)
+		return;
+
+	dev->mode_config.min_width  = 0;
+	dev->mode_config.min_height = 0;
+	dev->mode_config.max_width  = 4096;
+	dev->mode_config.max_height = 4096;
+
+	dev->mode_config.funcs = &vs_mode_config_funcs;
+	dev->mode_config.helper_private = &vs_mode_config_helpers;
+}
drivers/gpu/drm/verisilicon/vs_modeset.h new file +10 -0
new file mode 100644
index 000000000000..bd04f81d2ad2
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 VeriSilicon Holdings Co., Ltd.
+ */
+
+#ifndef __VS_MODESET_H__
+#define __VS_MODESET_H__
+
+void vs_mode_config_init(struct drm_device *dev);
+#endif /* __VS_FB_H__ */
Signature · 1 line
2.34.1
#8 lore raw

Re: [v3 3/6] drm/vs: Register DRM device

Hi Keith,

Quoted 4 lines · Keith Zhao

Implement drm device registration interface

---

[...]

Quoted 6 lines
drivers/gpu/drm/verisilicon/Kconfig new file +0 -0
new file mode 100644
index 000000000000..e10fa97635aa

drivers/gpu/drm/verisilicon/Kconfig line 10

Quoted 10 lines
drivers/gpu/drm/verisilicon/Kconfig new file +10 -0
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+config DRM_VERISILICON
+	tristate "DRM Support for VeriSilicon"
+	depends on DRM
+	select DRM_KMS_HELPER
+	select DRM_GEM_DMA_HELPER
+	select CMA
+	select DMA_CMA
+	help
+	  Choose this option if you have a VeriSilicon soc chipset.

This seems a bit generic. Doesn't the VeriSilicon display controller IP used on JH7110 have a product name?

[...]

Quoted 7 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +1 -0
new file mode 100644
index 000000000000..4fb1f29ef84b
@@ -0,0 +1,316 @@
+// SPDX-License-Identifier: GPL-2.0

[...]

drivers/gpu/drm/verisilicon/vs_drv.c line 69

Quoted 13 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +13 -0
+static void vs_drm_device_release_clocks(void *res)
+{
+	struct vs_drm_device *priv = res;
+	unsigned int i;
+
+	reset_control_bulk_assert(priv->nrsts, priv->rst_vout);
+
+	for (i = 0; i < priv->clk_count; ++i) {
+		if (priv->clks[i]) {
+			clk_disable_unprepare(priv->clks[i]);
+			clk_put(priv->clks[i]);
+		}
+	}

Why not use the bulk API for clk as well?

[...]

Quoted 7 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +7 -0
+static int vs_drm_device_init_clocks(struct vs_drm_device *priv)
+{
+	struct drm_device *dev = &priv->base;
+	struct platform_device *pdev = to_platform_device(dev->dev);
+	struct device_node *of_node = pdev->dev.of_node;
+	struct clk *clock;
+	unsigned int i;

drivers/gpu/drm/verisilicon/vs_drv.c line 94

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +10 -0
+	int ret;
+
+	if (dev_get_platdata(&pdev->dev) || !of_node)
+		return 0;
+
+	priv->nrsts = ARRAY_SIZE(priv->rst_vout);
+	for (int i = 0; i < priv->nrsts; ++i)
+		priv->rst_vout[i].id = vout_resets[i];
+	ret = devm_reset_control_bulk_get_shared(dev->dev, priv->nrsts,
+						 priv->rst_vout);

I would request resets and clocks in _probe().

If component_bind_all() returns -EPROBE_DEFER because of a still missing DSI panel backlight or similar, this doesn't have to be done multiple times.

Quoted 26 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +26 -0
+	if (ret) {
+		drm_err(dev, "Failed to get reset controls\n");
+		return ret;
+	}
+
+	priv->clk_count = of_clk_get_parent_count(of_node);
+	if (!priv->clk_count)
+		return 0;
+
+	priv->clks = drmm_kzalloc(dev, priv->clk_count * sizeof(priv->clks[0]),
+				  GFP_KERNEL);
+	if (!priv->clks)
+		return -ENOMEM;
+
+	for (i = 0; i < priv->clk_count; ++i) {
+		clock = of_clk_get(of_node, i);
+		if (IS_ERR(clock)) {
+			ret = PTR_ERR(clock);
+			if (ret == -EPROBE_DEFER)
+				goto err;
+			drm_err(dev, "clock %u not found: %d\n", i, ret);
+			continue;
+		}
+		ret = clk_prepare_enable(clock);
+		if (ret) {
+			drm_err(dev, "failed to enable clock %u: %d\n",

drivers/gpu/drm/verisilicon/vs_drv.c line 130

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +10 -0
+				i, ret);
+			clk_put(clock);
+			continue;
+		}
+		priv->clks[i] = clock;
+	}
+
+	ret = reset_control_bulk_deassert(priv->nrsts, priv->rst_vout);
+	if (ret)
+		return ret;

This should goto err, otherwise clocks are left enabled.

Quoted 23 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +23 -0
+
+	return devm_add_action_or_reset(&pdev->dev,
+					vs_drm_device_release_clocks,
+					priv);
+
+err:
+	while (i) {
+		--i;
+		if (priv->clks[i]) {
+			clk_disable_unprepare(priv->clks[i]);
+			clk_put(priv->clks[i]);
+		}
+	}
+	return ret;
+}
+
+static int vs_drm_bind(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct vs_drm_device *priv;
+	int ret;
+	struct drm_device *drm_dev;
+

drivers/gpu/drm/verisilicon/vs_drv.c line 163

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +10 -0
+	/* Remove existing drivers that may own the framebuffer memory. */
+	ret = drm_aperture_remove_framebuffers(&vs_drm_driver);
+	if (ret)
+		return ret;
+
+	priv = devm_drm_dev_alloc(dev, &vs_drm_driver, struct vs_drm_device, base);
+	if (IS_ERR(priv))
+		return PTR_ERR(priv);
+
+	priv->pitch_alignment = 64;

Why is this a variable instead of a constant?

Quoted 11 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +11 -0
+	ret = dma_set_coherent_mask(priv->base.dev, DMA_BIT_MASK(40));
+	if (ret)
+		return ret;
+
+	drm_dev = &priv->base;
+	platform_set_drvdata(pdev, drm_dev);
+
+	ret = vs_drm_device_init_clocks(priv);
+	if (ret)
+		return ret;
+

drivers/gpu/drm/verisilicon/vs_drv.c line 185

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +10 -0
+	vs_mode_config_init(drm_dev);
+
+	/* Now try and bind all our sub-components */
+	ret = component_bind_all(dev, drm_dev);
+	if (ret)
+		return ret;
+
+	ret = drm_vblank_init(drm_dev, drm_dev->mode_config.num_crtc);
+	if (ret)
+		return ret;

Missing component_unbind_all(), see below.

drivers/gpu/drm/verisilicon/vs_drv.c line 193

Quoted 8 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +8 -0
+
+	drm_mode_config_reset(drm_dev);
+
+	drm_kms_helper_poll_init(drm_dev);
+
+	ret = drm_dev_register(drm_dev, 0);
+	if (ret)
+		return ret;

Missing drm_kms_helper_poll_fini(), see below.

drivers/gpu/drm/verisilicon/vs_drv.c line 197

Quoted 4 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +4 -0
+
+	drm_fbdev_generic_setup(drm_dev, 32);
+
+	return 0;

Here I'd expect an error path calling drm_kms_helper_poll_fini() and component_unbind_all() as appropriate.

regards
Philipp

author
#9 lore raw

Re: [v3 3/6] drm/vs: Register DRM device

hi Philipp:

Quoted 19 lines · Philipp Zabel

Hi Keith,

Quoted 4 lines · Keith Zhao

Implement drm device registration interface

---

[...]

Quoted 11 lines
drivers/gpu/drm/verisilicon/Kconfig new file +5 -0
new file mode 100644
index 000000000000..e10fa97635aa
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+config DRM_VERISILICON
+	tristate "DRM Support for VeriSilicon"
+	depends on DRM
+	select DRM_KMS_HELPER
Quoted 8 lines

drivers/gpu/drm/verisilicon/Kconfig line 10

Quoted 5 lines
drivers/gpu/drm/verisilicon/Kconfig new file +5 -0
+	select DRM_GEM_DMA_HELPER
+	select CMA
+	select DMA_CMA
+	help
+	  Choose this option if you have a VeriSilicon soc chipset.

This seems a bit generic. Doesn't the VeriSilicon display controller IP used on JH7110 have a product name?

yes , there is a product name "dc8200", I will match it.

Quoted 10 lines

[...]

Quoted 7 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +1 -0
new file mode 100644
index 000000000000..4fb1f29ef84b
@@ -0,0 +1,316 @@
+// SPDX-License-Identifier: GPL-2.0

[...]

Quoted 15 lines

drivers/gpu/drm/verisilicon/vs_drv.c line 69

Quoted 13 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +13 -0
+static void vs_drm_device_release_clocks(void *res)
+{
+	struct vs_drm_device *priv = res;
+	unsigned int i;
+
+	reset_control_bulk_assert(priv->nrsts, priv->rst_vout);
+
+	for (i = 0; i < priv->clk_count; ++i) {
+		if (priv->clks[i]) {
+			clk_disable_unprepare(priv->clks[i]);
+			clk_put(priv->clks[i]);
+		}
+	}

Why not use the bulk API for clk as well?

ok , will do it next version

Quoted 23 lines

[...]

Quoted 7 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +7 -0
+static int vs_drm_device_init_clocks(struct vs_drm_device *priv)
+{
+	struct drm_device *dev = &priv->base;
+	struct platform_device *pdev = to_platform_device(dev->dev);
+	struct device_node *of_node = pdev->dev.of_node;
+	struct clk *clock;
+	unsigned int i;

drivers/gpu/drm/verisilicon/vs_drv.c line 94

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +10 -0
+	int ret;
+
+	if (dev_get_platdata(&pdev->dev) || !of_node)
+		return 0;
+
+	priv->nrsts = ARRAY_SIZE(priv->rst_vout);
+	for (int i = 0; i < priv->nrsts; ++i)
+		priv->rst_vout[i].id = vout_resets[i];
+	ret = devm_reset_control_bulk_get_shared(dev->dev, priv->nrsts,
+						 priv->rst_vout);

I would request resets and clocks in _probe().

Quoted 3 lines

If component_bind_all() returns -EPROBE_DEFER because of a still missing DSI panel backlight or similar, this doesn't have to be done multiple times.

I got what you mean. component_bind_all should be done multiple times
to prevent the dsi panel driver from lagging load.

in my drm subsystem , there are 2 pipeline

          +------------------------------+
          |                              |
          |                              |
  +----+  |   +-------------------+      |   +-------+   +------+   +------+
  |    +----->+  dc controller 0  +--->----->+HDMICtl| ->+ PHY  +-->+PANEL0+
  |AXI |  |   +-------------------+      |   +-------+   +------+   +------+
  |    |  |                              |
  |    |  |                              |
  |    |  |                              |
  |    |  |                              |
  |APB |  |   +-------------------+         +---------+    +------+  +-------+
  |    +----->+  dc controller 1  +--->---->+ dsiTx   +--->+DPHY  +->+ PANEL1+
  |    |  |   +-------------------+         +---------+    +------+  +-------+
  +----+  |                              |
          +------------------------------+

component_bind_all will bind the hdmi encoder and dsi encoder . binding the hdmi encoder will always return ok .

binging the dsi encoder has a question :
I used the panel-raspberrypi-touchscreen.c as panel driver , this driver is a i2c device and it use a i2c command to read reg ID if read success , it will do drm_panel_add.

if I disconnect the panel ,it will not do drm_panel_add.
dsiTx will fail to find panel , The consequence is that the inputbridge cannot be created , also outputbridge cannot be created.
for encoder bind , it will fail to find the input bridge of dsi.
Under this premise, although returning -EPROBE_DEFER allows bind to be executed multiple times, the final result is that the entire bind fails.

returning -EPROBE_DEFER can solve panel driver from lagging load , but for no panel case , it will destory all pipeline (include hdmi and dsi).

I did two things:
late_initcall_sync(vs_drm_init); to make sure the panel drive has been probed; dsi encoder bind always return ok to make sure hdmi pipeline ok at lease. component_bind_all do once .

Quoted 67 lines
Quoted 27 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +26 -0
+	if (ret) {
+		drm_err(dev, "Failed to get reset controls\n");
+		return ret;
+	}
+
+	priv->clk_count = of_clk_get_parent_count(of_node);
+	if (!priv->clk_count)
+		return 0;
+
+	priv->clks = drmm_kzalloc(dev, priv->clk_count * sizeof(priv->clks[0]),
+				  GFP_KERNEL);
+	if (!priv->clks)
+		return -ENOMEM;
+
+	for (i = 0; i < priv->clk_count; ++i) {
+		clock = of_clk_get(of_node, i);
+		if (IS_ERR(clock)) {
+			ret = PTR_ERR(clock);
+			if (ret == -EPROBE_DEFER)
+				goto err;
+			drm_err(dev, "clock %u not found: %d\n", i, ret);
+			continue;
+		}
+		ret = clk_prepare_enable(clock);
+		if (ret) {
+			drm_err(dev, "failed to enable clock %u: %d\n",

drivers/gpu/drm/verisilicon/vs_drv.c line 130

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +10 -0
+				i, ret);
+			clk_put(clock);
+			continue;
+		}
+		priv->clks[i] = clock;
+	}
+
+	ret = reset_control_bulk_deassert(priv->nrsts, priv->rst_vout);
+	if (ret)
+		return ret;

This should goto err, otherwise clocks are left enabled.

Quoted 27 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +27 -0
+
+	return devm_add_action_or_reset(&pdev->dev,
+					vs_drm_device_release_clocks,
+					priv);
+
+err:
+	while (i) {
+		--i;
+		if (priv->clks[i]) {
+			clk_disable_unprepare(priv->clks[i]);
+			clk_put(priv->clks[i]);
+		}
+	}
+	return ret;
+}
+
+static int vs_drm_bind(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct vs_drm_device *priv;
+	int ret;
+	struct drm_device *drm_dev;
+
+	/* Remove existing drivers that may own the framebuffer memory. */
+	ret = drm_aperture_remove_framebuffers(&vs_drm_driver);
+	if (ret)
+		return ret;
Quoted 8 lines

drivers/gpu/drm/verisilicon/vs_drv.c line 163

Quoted 6 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +6 -0
+
+	priv = devm_drm_dev_alloc(dev, &vs_drm_driver, struct vs_drm_device, base);
+	if (IS_ERR(priv))
+		return PTR_ERR(priv);
+
+	priv->pitch_alignment = 64;

Why is this a variable instead of a constant?

the dc controllers of VeriSilicon have different series, like dc8200 , dc9200... Their pitch values may vary from series to series, like 64 , 128

Quoted 36 lines
Quoted 12 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +11 -0
+	ret = dma_set_coherent_mask(priv->base.dev, DMA_BIT_MASK(40));
+	if (ret)
+		return ret;
+
+	drm_dev = &priv->base;
+	platform_set_drvdata(pdev, drm_dev);
+
+	ret = vs_drm_device_init_clocks(priv);
+	if (ret)
+		return ret;
+

drivers/gpu/drm/verisilicon/vs_drv.c line 185

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +10 -0
+	vs_mode_config_init(drm_dev);
+
+	/* Now try and bind all our sub-components */
+	ret = component_bind_all(dev, drm_dev);
+	if (ret)
+		return ret;
+
+	ret = drm_vblank_init(drm_dev, drm_dev->mode_config.num_crtc);
+	if (ret)
+		return ret;

Missing component_unbind_all(), see below.

drivers/gpu/drm/verisilicon/vs_drv.c line 193

Quoted 8 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +8 -0
+
+	drm_mode_config_reset(drm_dev);
+
+	drm_kms_helper_poll_init(drm_dev);
+
+	ret = drm_dev_register(drm_dev, 0);
+	if (ret)
+		return ret;

Missing drm_kms_helper_poll_fini(), see below.

Quoted 8 lines

drivers/gpu/drm/verisilicon/vs_drv.c line 197

Quoted 4 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +4 -0
+
+	drm_fbdev_generic_setup(drm_dev, 32);
+
+	return 0;

Here I'd expect an error path calling drm_kms_helper_poll_fini() and component_unbind_all() as appropriate.

ok

Quoted 3 lines

regards
Philipp

#10 lore raw

Re: [v3 3/6] drm/vs: Register DRM device

Hi,

Quoted 21 lines · Keith Zhao
Quoted 21 lines
Quoted 7 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +7 -0
+static int vs_drm_device_init_clocks(struct vs_drm_device *priv)
+{
+	struct drm_device *dev = &priv->base;
+	struct platform_device *pdev = to_platform_device(dev->dev);
+	struct device_node *of_node = pdev->dev.of_node;
+	struct clk *clock;
+	unsigned int i;

drivers/gpu/drm/verisilicon/vs_drv.c line 94

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +10 -0
+	int ret;
+
+	if (dev_get_platdata(&pdev->dev) || !of_node)
+		return 0;
+
+	priv->nrsts = ARRAY_SIZE(priv->rst_vout);
+	for (int i = 0; i < priv->nrsts; ++i)
+		priv->rst_vout[i].id = vout_resets[i];
+	ret = devm_reset_control_bulk_get_shared(dev->dev, priv->nrsts,
+						 priv->rst_vout);

I would request resets and clocks in _probe().

Quoted 5 lines
Quoted 3 lines

If component_bind_all() returns -EPROBE_DEFER because of a still missing DSI panel backlight or similar, this doesn't have to be done multiple times.

I got what you mean. component_bind_all should be done multiple times
to prevent the dsi panel driver from lagging load.

No. component_bind_all only needs to be called once.

Quoted 34 lines

in my drm subsystem , there are 2 pipeline

          +------------------------------+
          |                              |
          |                              |
  +----+  |   +-------------------+      |   +-------+   +------+   +------+
  |    +----->+  dc controller 0  +--->----->+HDMICtl| ->+ PHY  +-->+PANEL0+
  |AXI |  |   +-------------------+      |   +-------+   +------+   +------+
  |    |  |                              |
  |    |  |                              |
  |    |  |                              |
  |    |  |                              |
  |APB |  |   +-------------------+         +---------+    +------+  +-------+
  |    +----->+  dc controller 1  +--->---->+ dsiTx   +--->+DPHY  +->+ PANEL1+
  |    |  |   +-------------------+         +---------+    +------+  +-------+
  +----+  |                              |
          +------------------------------+

component_bind_all will bind the hdmi encoder and dsi encoder . binding the hdmi encoder will always return ok .

binging the dsi encoder has a question :
I used the panel-raspberrypi-touchscreen.c as panel driver , this driver is a i2c device and it use a i2c command to read reg ID if read success , it will do drm_panel_add.

if I disconnect the panel ,it will not do drm_panel_add.
dsiTx will fail to find panel , The consequence is that the inputbridge cannot be created , also outputbridge cannot be created.
for encoder bind , it will fail to find the input bridge of dsi.
Under this premise, although returning -EPROBE_DEFER allows bind to be executed multiple times, the final result is that the entire bind fails.

Quoted 2 lines

returning -EPROBE_DEFER can solve panel driver from lagging load , but for no panel case , it will destory all pipeline (include hdmi and dsi).

Yes, that's expected.

Quoted 4 lines

I did two things:
late_initcall_sync(vs_drm_init); to make sure the panel drive has been probed; dsi encoder bind always return ok to make sure hdmi pipeline ok at lease. component_bind_all do once .

You should have a look at
https://www.kernel.org/doc/html/latest/gpu/drm-kms-helpers.html#special-care-with-mipi-dsi-bridges

Maxime

#11 lore raw

Re: [v3 3/6] drm/vs: Register DRM device

In reply to Keith Zhao
Quoted 171 lines · Keith Zhao

Implement drm device registration interface

---
 MAINTAINERS                              |   1 +
 drivers/gpu/drm/Kconfig                  |   2 +
 drivers/gpu/drm/Makefile                 |   1 +
 drivers/gpu/drm/verisilicon/Kconfig      |  13 +
 drivers/gpu/drm/verisilicon/Makefile     |   6 +
 drivers/gpu/drm/verisilicon/vs_drv.c     | 316 +++++++++++++++++++++++
 drivers/gpu/drm/verisilicon/vs_drv.h     |  42 +++
 drivers/gpu/drm/verisilicon/vs_modeset.c |  39 +++
 drivers/gpu/drm/verisilicon/vs_modeset.h |  10 +
 9 files changed, 430 insertions(+)
 create mode 100644 drivers/gpu/drm/verisilicon/Kconfig
 create mode 100644 drivers/gpu/drm/verisilicon/Makefile
 create mode 100644 drivers/gpu/drm/verisilicon/vs_drv.c
 create mode 100644 drivers/gpu/drm/verisilicon/vs_drv.h
 create mode 100644 drivers/gpu/drm/verisilicon/vs_modeset.c
 create mode 100644 drivers/gpu/drm/verisilicon/vs_modeset.h
MAINTAINERS +1 -0
index 7caaadb83f3f..8dc9ebfe4605 100644
@@ -6887,6 +6887,7 @@ L:        [email protected]
 S:     Maintained
 T:     git git://anongit.freedesktop.org/drm/drm-misc
 F:     Documentation/devicetree/bindings/display/starfive/
+F:     drivers/gpu/drm/verisilicon/
 
 DRM DRIVER FOR TI DLPC3433 MIPI DSI TO DMD BRIDGE
 M:     Jagan Teki <[email protected]>
drivers/gpu/drm/Kconfig +2 -0
index 3eee8636f847..e8d53c2e7c86 100644
@@ -394,6 +394,8 @@ source "drivers/gpu/drm/solomon/Kconfig"
 
 source "drivers/gpu/drm/sprd/Kconfig"
 
+source "drivers/gpu/drm/verisilicon/Kconfig"
+
 config DRM_HYPERV
        tristate "DRM Support for Hyper-V synthetic video device"
        depends on DRM && PCI && MMU && HYPERV
drivers/gpu/drm/Makefile +1 -0
index 8e1bde059170..29e04acded06 100644
@@ -198,3 +198,4 @@ obj-$(CONFIG_DRM_HYPERV) += hyperv/
 obj-y                  += solomon/
 obj-$(CONFIG_DRM_SPRD) += sprd/
 obj-$(CONFIG_DRM_LOONGSON) += loongson/
+obj-$(CONFIG_DRM_VERISILICON) += verisilicon/
drivers/gpu/drm/verisilicon/Kconfig new file +13 -0
new file mode 100644
index 000000000000..e10fa97635aa
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+config DRM_VERISILICON
+       tristate "DRM Support for VeriSilicon"
+       depends on DRM
+       select DRM_KMS_HELPER
+       select DRM_GEM_DMA_HELPER
+       select CMA
+       select DMA_CMA
+       help
+         Choose this option if you have a VeriSilicon soc chipset.
+         This driver provides VeriSilicon kernel mode
+         setting and buffer management. It does not
+         provide 2D or 3D acceleration.
drivers/gpu/drm/verisilicon/Makefile new file +6 -0
new file mode 100644
index 000000000000..d785a1dfaa7f
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+
+vs_drm-objs := vs_drv.o \
+              vs_modeset.o
+
+obj-$(CONFIG_DRM_VERISILICON) += vs_drm.o
drivers/gpu/drm/verisilicon/vs_drv.c new file +78 -0
new file mode 100644
index 000000000000..4fb1f29ef84b
@@ -0,0 +1,316 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 VeriSilicon Holdings Co., Ltd.
+ */
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/of_clk.h>
+#include <linux/pm_runtime.h>
+
+#include <drm/drm_aperture.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_fb_helper.h>
+#include <drm/drm_fbdev_generic.h>
+#include <drm/drm_file.h>
+#include <drm/drm_gem_dma_helper.h>
+#include <drm/drm_module.h>
+#include <drm/drm_of.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_vblank.h>
+
+#include "vs_drv.h"
+#include "vs_modeset.h"
+
+#define DRV_NAME       "verisilicon"
+#define DRV_DESC       "Verisilicon DRM driver"
+#define DRV_DATE       "20230516"
+#define DRV_MAJOR      1
+#define DRV_MINOR      0
+
+static int vs_gem_dumb_create(struct drm_file *file, struct drm_device *dev,
+                             struct drm_mode_create_dumb *args)
+{
+       struct vs_drm_device *priv = to_vs_drm_private(dev);
+       unsigned int pitch = DIV_ROUND_UP(args->width * args->bpp, 8);
+
+       args->pitch = ALIGN(pitch, priv->pitch_alignment);
+       return drm_gem_dma_dumb_create_internal(file, dev, args);
+}
+
+DEFINE_DRM_GEM_FOPS(vs_drm_fops);
+
+static struct drm_driver vs_drm_driver = {
+       .driver_features        = DRIVER_MODESET | DRIVER_ATOMIC | DRIVER_GEM,
+
+       DRM_GEM_DMA_DRIVER_OPS_WITH_DUMB_CREATE(vs_gem_dumb_create),
+
+       .fops                   = &vs_drm_fops,
+       .name                   = DRV_NAME,
+       .desc                   = DRV_DESC,
+       .date                   = DRV_DATE,
+       .major                  = DRV_MAJOR,
+       .minor                  = DRV_MINOR,
+};
+
+static void vs_drm_device_release_clocks(void *res)
+{
+       struct vs_drm_device *priv = res;
+       unsigned int i;
+
+       reset_control_bulk_assert(priv->nrsts, priv->rst_vout);
+
+       for (i = 0; i < priv->clk_count; ++i) {
+               if (priv->clks[i]) {
+                       clk_disable_unprepare(priv->clks[i]);
+                       clk_put(priv->clks[i]);
+               }
+       }
+}
+
+static const char * const vout_resets[] = {
+       "axi",
+       "ahb",
+       "core",
+};
+
+static int vs_drm_device_init_clocks(struct vs_drm_device *priv)

drivers/gpu/drm/verisilicon/vs_drv.c line 88

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +10 -0
+{
+       struct drm_device *dev = &priv->base;
+       struct platform_device *pdev = to_platform_device(dev->dev);
+       struct device_node *of_node = pdev->dev.of_node;
+       struct clk *clock;
+       unsigned int i;
+       int ret;
+
+       if (dev_get_platdata(&pdev->dev) || !of_node)
+               return 0;

Drop dev_get_platdata(), you don't seem to use it.

Quoted 28 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +28 -0
+
+       priv->nrsts = ARRAY_SIZE(priv->rst_vout);
+       for (int i = 0; i < priv->nrsts; ++i)
+               priv->rst_vout[i].id = vout_resets[i];
+       ret = devm_reset_control_bulk_get_shared(dev->dev, priv->nrsts,
+                                                priv->rst_vout);
+       if (ret) {
+               drm_err(dev, "Failed to get reset controls\n");
+               return ret;
+       }
+
+       priv->clk_count = of_clk_get_parent_count(of_node);
+       if (!priv->clk_count)
+               return 0;
+
+       priv->clks = drmm_kzalloc(dev, priv->clk_count * sizeof(priv->clks[0]),
+                                 GFP_KERNEL);
+       if (!priv->clks)
+               return -ENOMEM;
+
+       for (i = 0; i < priv->clk_count; ++i) {
+               clock = of_clk_get(of_node, i);
+               if (IS_ERR(clock)) {
+                       ret = PTR_ERR(clock);
+                       if (ret == -EPROBE_DEFER)
+                               goto err;
+                       drm_err(dev, "clock %u not found: %d\n", i, ret);
+                       continue;

drivers/gpu/drm/verisilicon/vs_drv.c line 126

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +10 -0
+               }
+               ret = clk_prepare_enable(clock);
+               if (ret) {
+                       drm_err(dev, "failed to enable clock %u: %d\n",
+                               i, ret);
+                       clk_put(clock);
+                       continue;
+               }
+               priv->clks[i] = clock;
+       }

This can be rewritten as devm_clk_bulk_get_all()

drivers/gpu/drm/verisilicon/vs_drv.c line 130

Quoted 4 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +4 -0
+
+       ret = reset_control_bulk_deassert(priv->nrsts, priv->rst_vout);
+       if (ret)
+               return ret;

It is a bad idea to mix get_resources kind of function with the actual resource control. Please move reset deassertion upwards.

Quoted 17 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +17 -0
+
+       return devm_add_action_or_reset(&pdev->dev,
+                                       vs_drm_device_release_clocks,
+                                       priv);
+
+err:
+       while (i) {
+               --i;
+               if (priv->clks[i]) {
+                       clk_disable_unprepare(priv->clks[i]);
+                       clk_put(priv->clks[i]);
+               }
+       }
+       return ret;
+}
+
+static int vs_drm_bind(struct device *dev)

drivers/gpu/drm/verisilicon/vs_drv.c line 157

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +10 -0
+{
+       struct platform_device *pdev = to_platform_device(dev);
+       struct vs_drm_device *priv;
+       int ret;
+       struct drm_device *drm_dev;
+
+       /* Remove existing drivers that may own the framebuffer memory. */
+       ret = drm_aperture_remove_framebuffers(&vs_drm_driver);
+       if (ret)
+               return ret;

If anything happens during the probe, your platform is left with no display output. I think it might be better to call this when the driver has acquired all the resources and is ready to start hw init.

Quoted 26 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +26 -0
+
+       priv = devm_drm_dev_alloc(dev, &vs_drm_driver, struct vs_drm_device, base);
+       if (IS_ERR(priv))
+               return PTR_ERR(priv);
+
+       priv->pitch_alignment = 64;
+
+       ret = dma_set_coherent_mask(priv->base.dev, DMA_BIT_MASK(40));
+       if (ret)
+               return ret;
+
+       drm_dev = &priv->base;
+       platform_set_drvdata(pdev, drm_dev);
+
+       ret = vs_drm_device_init_clocks(priv);
+       if (ret)
+               return ret;
+
+       vs_mode_config_init(drm_dev);
+
+       /* Now try and bind all our sub-components */
+       ret = component_bind_all(dev, drm_dev);
+       if (ret)
+               return ret;
+
+       ret = drm_vblank_init(drm_dev, drm_dev->mode_config.num_crtc);

drivers/gpu/drm/verisilicon/vs_drv.c line 193

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +10 -0
+       if (ret)
+               return ret;
+
+       drm_mode_config_reset(drm_dev);
+
+       drm_kms_helper_poll_init(drm_dev);
+
+       ret = drm_dev_register(drm_dev, 0);
+       if (ret)
+               return ret;

Teardown path is missing.

Quoted 45 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +45 -0
+
+       drm_fbdev_generic_setup(drm_dev, 32);
+
+       return 0;
+}
+
+static void vs_drm_unbind(struct device *dev)
+{
+       struct drm_device *drm_dev = dev_get_drvdata(dev);
+
+       drm_dev_unregister(drm_dev);
+       drm_kms_helper_poll_fini(drm_dev);
+       component_unbind_all(drm_dev->dev, drm_dev);
+}
+
+static const struct component_master_ops vs_drm_ops = {
+       .bind = vs_drm_bind,
+       .unbind = vs_drm_unbind,
+};
+
+static struct platform_driver *drm_sub_drivers[] = {
+};
+
+static struct component_match *vs_drm_match_add(struct device *dev)
+{
+       struct component_match *match = NULL;
+       int i;
+
+       for (i = 0; i < ARRAY_SIZE(drm_sub_drivers); ++i) {
+               struct platform_driver *drv = drm_sub_drivers[i];
+               struct device *p = NULL, *d;
+
+               while ((d = platform_find_device_by_driver(p, &drv->driver))) {
+                       put_device(p);
+
+                       drm_of_component_match_add(dev, &match, component_compare_of,
+                                                  d->of_node);
+                       p = d;
+               }
+               put_device(p);
+       }
+
+       return match ? match : ERR_PTR(-ENODEV);
+}
+

drivers/gpu/drm/verisilicon/vs_drv.c line 248

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +10 -0
+static int vs_drm_platform_probe(struct platform_device *pdev)
+{
+       struct device *dev = &pdev->dev;
+       struct component_match *match;
+
+       match = vs_drm_match_add(dev);
+       if (IS_ERR(match))
+               return PTR_ERR(match);
+
+       return component_master_add_with_match(dev, &vs_drm_ops, match);

I wonder if you can use drm_of_component_probe() instead?

drivers/gpu/drm/verisilicon/vs_drv.c line 251

Quoted 3 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +3 -0
+}
+
+static int vs_drm_platform_remove(struct platform_device *pdev)

I think this should be void vs_drm_platform_remove() and .remove_new

Quoted 4 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +4 -0
+{
+       component_master_del(&pdev->dev, &vs_drm_ops);
+       return 0;
+}

drivers/gpu/drm/verisilicon/vs_drv.c line 265

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +10 -0
+
+#ifdef CONFIG_PM_SLEEP
+static int vs_drm_suspend(struct device *dev)
+{
+       return drm_mode_config_helper_suspend(dev_get_drvdata(dev));
+}
+
+static int vs_drm_resume(struct device *dev)
+{
+       drm_mode_config_helper_resume(dev_get_drvdata(dev));

return drm_mode_config_helper_resume()

Quoted 69 lines
drivers/gpu/drm/verisilicon/vs_drv.c new file +51 -0
+
+       return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(vs_drm_pm_ops, vs_drm_suspend, vs_drm_resume);
+
+static const struct of_device_id vs_drm_dt_ids[] = {
+       { .compatible = "starfive,display-subsystem", },
+       { },
+};
+
+MODULE_DEVICE_TABLE(of, vs_drm_dt_ids);
+
+static struct platform_driver vs_drm_platform_driver = {
+       .probe = vs_drm_platform_probe,
+       .remove = vs_drm_platform_remove,
+
+       .driver = {
+               .name = DRV_NAME,
+               .of_match_table = vs_drm_dt_ids,
+               .pm = &vs_drm_pm_ops,
+       },
+};
+
+static int __init vs_drm_init(void)
+{
+       int ret;
+
+       ret = platform_register_drivers(drm_sub_drivers, ARRAY_SIZE(drm_sub_drivers));
+       if (ret)
+               return ret;
+
+       ret = drm_platform_driver_register(&vs_drm_platform_driver);
+       if (ret)
+               platform_unregister_drivers(drm_sub_drivers, ARRAY_SIZE(drm_sub_drivers));
+
+       return ret;
+}
+
+static void __exit vs_drm_fini(void)
+{
+       platform_driver_unregister(&vs_drm_platform_driver);
+       platform_unregister_drivers(drm_sub_drivers, ARRAY_SIZE(drm_sub_drivers));
+}
+
+late_initcall_sync(vs_drm_init);
+module_exit(vs_drm_fini);
+
+MODULE_DESCRIPTION("VeriSilicon DRM Driver");
+MODULE_LICENSE("GPL");
drivers/gpu/drm/verisilicon/vs_drv.h new file +12 -0
new file mode 100644
index 000000000000..ea2189772980
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2023 VeriSilicon Holdings Co., Ltd.
+ */
+
+#ifndef __VS_DRV_H__
+#define __VS_DRV_H__
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_gem.h>

drivers/gpu/drm/verisilicon/vs_drv.h line 22

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_drv.h new file +10 -0
+#include <drm/drm_managed.h>
+#include <linux/clk.h>
+#include <linux/reset.h>
+
+enum rst_vout {
+       RST_VOUT_AXI = 0,
+       RST_VOUT_AHB,
+       RST_VOUT_CORE,
+       RST_VOUT_NUM
+};

Do you need these values? They can easily get out of sync with vout_rsts.

Quoted 84 lines
drivers/gpu/drm/verisilicon/vs_drv.h new file +20 -0
+
+/*@pitch_alignment: buffer pitch alignment required by sub-devices.*/
+struct vs_drm_device {
+       struct drm_device base;
+       unsigned int pitch_alignment;
+       /* clocks */
+       unsigned int clk_count;
+       struct clk **clks;
+
+       struct reset_control_bulk_data rst_vout[RST_VOUT_NUM];
+       int     nrsts;
+};
+
+static inline struct vs_drm_device *
+to_vs_drm_private(const struct drm_device *dev)
+{
+       return container_of(dev, struct vs_drm_device, base);
+}
+
+#endif /* __VS_DRV_H__ */
drivers/gpu/drm/verisilicon/vs_modeset.c new file +39 -0
new file mode 100644
index 000000000000..eaf406c1b7c7
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 VeriSilicon Holdings Co., Ltd.
+ */
+
+#include <linux/module.h>
+
+#include <drm/drm_damage_helper.h>
+#include <drm/drm_fb_helper.h>
+#include <drm/drm_gem_framebuffer_helper.h>
+
+#include "vs_modeset.h"
+
+static const struct drm_mode_config_funcs vs_mode_config_funcs = {
+       .fb_create                       = drm_gem_fb_create,
+       .atomic_check            = drm_atomic_helper_check,
+       .atomic_commit           = drm_atomic_helper_commit,
+};
+
+static struct drm_mode_config_helper_funcs vs_mode_config_helpers = {
+       .atomic_commit_tail = drm_atomic_helper_commit_tail_rpm,
+};
+
+void vs_mode_config_init(struct drm_device *dev)
+{
+       int ret;
+
+       ret = drmm_mode_config_init(dev);
+       if (ret)
+               return;
+
+       dev->mode_config.min_width  = 0;
+       dev->mode_config.min_height = 0;
+       dev->mode_config.max_width  = 4096;
+       dev->mode_config.max_height = 4096;
+
+       dev->mode_config.funcs = &vs_mode_config_funcs;
+       dev->mode_config.helper_private = &vs_mode_config_helpers;
+}
drivers/gpu/drm/verisilicon/vs_modeset.h new file +10 -1
new file mode 100644
index 000000000000..bd04f81d2ad2
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 VeriSilicon Holdings Co., Ltd.
+ */
+
+#ifndef __VS_MODESET_H__
+#define __VS_MODESET_H__
+
+void vs_mode_config_init(struct drm_device *dev);
+#endif /* __VS_FB_H__ */
--

2.34.1

Signature · 2 lines
With best wishes
Dmitry
author
#12 lore raw

PATCH v3 4/6 drm/vs: Add KMS crtc&plane

In reply to Keith Zhao

add 2 crtcs and 8 planes in vs-drm

---
 drivers/gpu/drm/verisilicon/Makefile   |    9 +-
 drivers/gpu/drm/verisilicon/vs_crtc.c  |  208 +++++
 drivers/gpu/drm/verisilicon/vs_crtc.h  |   42 +
 drivers/gpu/drm/verisilicon/vs_dc.c    | 1192 ++++++++++++++++++++++++
 drivers/gpu/drm/verisilicon/vs_dc.h    |   67 ++
 drivers/gpu/drm/verisilicon/vs_dc_hw.c | 1022 ++++++++++++++++++++
 drivers/gpu/drm/verisilicon/vs_dc_hw.h |  580 ++++++++++++
 drivers/gpu/drm/verisilicon/vs_drv.c   |    2 +
 drivers/gpu/drm/verisilicon/vs_plane.c |  301 ++++++
 drivers/gpu/drm/verisilicon/vs_plane.h |   39 +
 drivers/gpu/drm/verisilicon/vs_type.h  |   69 ++
 11 files changed, 3528 insertions(+), 3 deletions(-)
 create mode 100644 drivers/gpu/drm/verisilicon/vs_crtc.c
 create mode 100644 drivers/gpu/drm/verisilicon/vs_crtc.h
 create mode 100644 drivers/gpu/drm/verisilicon/vs_dc.c
 create mode 100644 drivers/gpu/drm/verisilicon/vs_dc.h
 create mode 100644 drivers/gpu/drm/verisilicon/vs_dc_hw.c
 create mode 100644 drivers/gpu/drm/verisilicon/vs_dc_hw.h
 create mode 100644 drivers/gpu/drm/verisilicon/vs_plane.c
 create mode 100644 drivers/gpu/drm/verisilicon/vs_plane.h
 create mode 100644 drivers/gpu/drm/verisilicon/vs_type.h
drivers/gpu/drm/verisilicon/Makefile +6 -3
index d785a1dfaa7f..bf6f2b7ee480 100644
@@ -1,6 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0
 
-vs_drm-objs := vs_drv.o \
-	       vs_modeset.o
-
+vs_drm-objs := vs_dc_hw.o \
+		vs_dc.o \
+		vs_crtc.o \
+		vs_drv.o \
+		vs_modeset.o \
+		vs_plane.o
 obj-$(CONFIG_DRM_VERISILICON) += vs_drm.o
drivers/gpu/drm/verisilicon/vs_crtc.c new file +208 -0

208 lines not on this page · raw message

drivers/gpu/drm/verisilicon/vs_crtc.h new file +42 -0

42 lines not on this page · raw message

drivers/gpu/drm/verisilicon/vs_dc.c new file +1192 -0

1,192 lines not on this page · raw message

drivers/gpu/drm/verisilicon/vs_dc.h new file +67 -0

67 lines not on this page · raw message

drivers/gpu/drm/verisilicon/vs_dc_hw.c new file +1022 -0

1,022 lines not on this page · raw message

drivers/gpu/drm/verisilicon/vs_dc_hw.h new file +580 -0

457 lines not on this page · raw message

drivers/gpu/drm/verisilicon/vs_drv.c +2 -0
index 4fb1f29ef84b..3ef90c8238a0 100644

Lines of this file are not shown. View the raw message.

drivers/gpu/drm/verisilicon/vs_plane.c new file +301 -0

301 lines not on this page · raw message

drivers/gpu/drm/verisilicon/vs_plane.h new file +39 -0
new file mode 100644
index 000000000000..7174ac298ffd

Lines of this file are not shown. View the raw message.

drivers/gpu/drm/verisilicon/vs_type.h new file +69 -0

69 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Signature · 1 line
2.34.1

Part of the diff is not shown here. View the raw message.

#13 lore raw

Re: [v3 4/6] drm/vs: Add KMS crtc&plane

kernel test robot noticed the following build warnings:

Hi Keith,

kernel test robot noticed the following build warnings:

[auto build test WARNING on robh/for-next]
[also build test WARNING on linus/master v6.7-rc4]
[cannot apply to drm-misc/drm-misc-next drm/drm-next next-20231204] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Keith-Zhao/dt-bindings-display-Add-yamls-for-JH7110-display-system/20231204-203725
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
patch link:    https://lore.kernel.org/r/20231204123315.28456-5-keith.zhao%40starfivetech.com
patch subject: [v3 4/6] drm/vs: Add KMS crtc&plane
config: m68k-allyesconfig (https://download.01.org/0day-ci/archive/20231205/[email protected]/config)
compiler: m68k-linux-gcc (GCC) 13.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20231205/[email protected]/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/

All warnings (new ones prefixed by >>):

drivers/gpu/drm/verisilicon/vs_dc.c: In function 'dc_isr':
drivers/gpu/drm/verisilicon/vs_dc.c:970:16: warning: variable 'ret' set but not used [-Wunused-but-set-variable]

     970 |         u32 i, ret;
         |                ^~~
   drivers/gpu/drm/verisilicon/vs_dc.c: At top level:
>> drivers/gpu/drm/verisilicon/vs_dc.c:78:18: warning: 'primary_overlay_format1' defined but not used [-Wunused-const-variable=]
      78 | static const u32 primary_overlay_format1[] = {
         |                  ^~~~~~~~~~~~~~~~~~~~~~~
--
   drivers/gpu/drm/verisilicon/vs_plane.c: In function 'vs_plane_atomic_duplicate_state':
>> drivers/gpu/drm/verisilicon/vs_plane.c:48:32: warning: variable 'old_state' set but not used [-Wunused-but-set-variable]
      48 |         struct vs_plane_state *old_state;
         |                                ^~~~~~~~~

Kconfig warnings: (for reference only)
WARNING: unmet direct dependencies detected for DMA_CMA Depends on [n]: HAVE_DMA_CONTIGUOUS [=n] && CMA [=y] Selected by [y]:
- DRM_VERISILICON [=y] && HAS_IOMEM [=y] && DRM [=y]

vim +/primary_overlay_format1 +78 drivers/gpu/drm/verisilicon/vs_dc.c

    77	
  > 78	static const u32 primary_overlay_format1[] = {
    79		DRM_FORMAT_XRGB8888,
    80		DRM_FORMAT_XBGR8888,
    81		DRM_FORMAT_RGBX8888,
    82		DRM_FORMAT_BGRX8888,
    83		DRM_FORMAT_ARGB8888,
    84		DRM_FORMAT_ABGR8888,
    85		DRM_FORMAT_RGBA8888,
    86		DRM_FORMAT_BGRA8888,
    87		DRM_FORMAT_ARGB2101010,
    88		DRM_FORMAT_ABGR2101010,
    89		DRM_FORMAT_RGBA1010102,
    90		DRM_FORMAT_BGRA1010102,
    91		DRM_FORMAT_NV12,
    92		DRM_FORMAT_NV21,
    93		DRM_FORMAT_YUV444,
    94	};
    95	
Signature · 2 lines
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
#14 lore raw

Re: [v3 4/6] drm/vs: Add KMS crtc&plane

In reply to Keith Zhao
Quoted 32 lines · Keith Zhao

add 2 crtcs and 8 planes in vs-drm

---
 drivers/gpu/drm/verisilicon/Makefile   |    9 +-
 drivers/gpu/drm/verisilicon/vs_crtc.c  |  208 +++++
 drivers/gpu/drm/verisilicon/vs_crtc.h  |   42 +
 drivers/gpu/drm/verisilicon/vs_dc.c    | 1192 ++++++++++++++++++++++++
 drivers/gpu/drm/verisilicon/vs_dc.h    |   67 ++
 drivers/gpu/drm/verisilicon/vs_dc_hw.c | 1022 ++++++++++++++++++++
 drivers/gpu/drm/verisilicon/vs_dc_hw.h |  580 ++++++++++++
 drivers/gpu/drm/verisilicon/vs_drv.c   |    2 +
 drivers/gpu/drm/verisilicon/vs_plane.c |  301 ++++++
 drivers/gpu/drm/verisilicon/vs_plane.h |   39 +
 drivers/gpu/drm/verisilicon/vs_type.h  |   69 ++
 11 files changed, 3528 insertions(+), 3 deletions(-)
 create mode 100644 drivers/gpu/drm/verisilicon/vs_crtc.c
 create mode 100644 drivers/gpu/drm/verisilicon/vs_crtc.h
 create mode 100644 drivers/gpu/drm/verisilicon/vs_dc.c
 create mode 100644 drivers/gpu/drm/verisilicon/vs_dc.h
 create mode 100644 drivers/gpu/drm/verisilicon/vs_dc_hw.c
 create mode 100644 drivers/gpu/drm/verisilicon/vs_dc_hw.h
 create mode 100644 drivers/gpu/drm/verisilicon/vs_plane.c
 create mode 100644 drivers/gpu/drm/verisilicon/vs_plane.h
 create mode 100644 drivers/gpu/drm/verisilicon/vs_type.h
drivers/gpu/drm/verisilicon/Makefile +0 -0
index d785a1dfaa7f..bf6f2b7ee480 100644

drivers/gpu/drm/verisilicon/Makefile line 3

Quoted 6 lines
drivers/gpu/drm/verisilicon/Makefile +1 -3
@@ -1,6 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0
 
-vs_drm-objs := vs_drv.o \
-              vs_modeset.o
-
+vs_drm-objs := vs_dc_hw.o \

Nit: if you move the first object to the next line, you won't have to touch the first line.

drivers/gpu/drm/verisilicon/Makefile line 8

Quoted 5 lines
drivers/gpu/drm/verisilicon/Makefile +5 -0
+               vs_dc.o \
+               vs_crtc.o \
+               vs_drv.o \
+               vs_modeset.o \
+               vs_plane.o

Keep the empty line, please.

Quoted 74 lines
drivers/gpu/drm/verisilicon/Makefile +0 -0
 obj-$(CONFIG_DRM_VERISILICON) += vs_drm.o
drivers/gpu/drm/verisilicon/vs_crtc.c new file +67 -0
new file mode 100644
index 000000000000..5581219b1230
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 VeriSilicon Holdings Co., Ltd.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/debugfs.h>
+#include <linux/media-bus-format.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_atomic.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_gem_atomic_helper.h>
+#include <drm/drm_vblank.h>
+
+#include "vs_crtc.h"
+#include "vs_dc.h"
+#include "vs_drv.h"
+
+static void vs_crtc_atomic_destroy_state(struct drm_crtc *crtc,
+                                        struct drm_crtc_state *state)
+{
+       __drm_atomic_helper_crtc_destroy_state(state);
+       kfree(to_vs_crtc_state(state));
+}
+
+static void vs_crtc_reset(struct drm_crtc *crtc)
+{
+       struct vs_crtc_state *state;
+
+       if (crtc->state)
+               vs_crtc_atomic_destroy_state(crtc, crtc->state);
+
+       state = kzalloc(sizeof(*state), GFP_KERNEL);
+       if (!state)
+               return;
+
+       __drm_atomic_helper_crtc_reset(crtc, &state->base);
+}
+
+static struct drm_crtc_state *
+vs_crtc_atomic_duplicate_state(struct drm_crtc *crtc)
+{
+       struct vs_crtc_state *old_state;
+       struct vs_crtc_state *state;
+
+       if (!crtc->state)
+               return NULL;
+
+       old_state = to_vs_crtc_state(crtc->state);
+
+       state = kmemdup(old_state, sizeof(*old_state), GFP_KERNEL);
+               if (!state)
+                       return NULL;
+
+       __drm_atomic_helper_crtc_duplicate_state(crtc, &state->base);
+
+       return &state->base;
+}
+
+static int vs_crtc_enable_vblank(struct drm_crtc *crtc)
+{
+       struct vs_crtc *vs_crtc = to_vs_crtc(crtc);
+       struct vs_dc *dc = dev_get_drvdata(vs_crtc->dev);
+
+       vs_dc_enable_vblank(dc, true);

drivers/gpu/drm/verisilicon/vs_crtc.c line 77

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_crtc.c new file +10 -0
+
+       return 0;
+}
+
+static void vs_crtc_disable_vblank(struct drm_crtc *crtc)
+{
+       struct vs_crtc *vs_crtc = to_vs_crtc(crtc);
+       struct vs_dc *dc = dev_get_drvdata(vs_crtc->dev);
+
+       vs_dc_enable_vblank(dc, false);

I always found foo_enable_something(false) to be strange. Could you please split this into two functions?

drivers/gpu/drm/verisilicon/vs_crtc.c line 85

Quoted 8 lines
drivers/gpu/drm/verisilicon/vs_crtc.c new file +8 -0
+}
+
+static void vs_crtc_atomic_print_state(struct drm_printer *p,
+                                      const struct drm_crtc_state *state)
+{
+       struct vs_crtc *vs_crtc = to_vs_crtc(state->crtc);
+
+       drm_printf(p, "vs crtc State\n");

Please drop this line, it breaks the debugfs/state flow.

Quoted 277 lines
drivers/gpu/drm/verisilicon/vs_crtc.c new file +123 -0
+       drm_printf(p, "\tcolor_formats: %d\n", vs_crtc->color_formats);
+       drm_printf(p, "\tmax_bpc: %d\n", vs_crtc->max_bpc);
+}
+
+static const struct drm_crtc_funcs vs_crtc_funcs = {
+       .set_config             = drm_atomic_helper_set_config,
+       .page_flip              = drm_atomic_helper_page_flip,
+       .reset                  = vs_crtc_reset,
+       .atomic_duplicate_state = vs_crtc_atomic_duplicate_state,
+       .atomic_destroy_state   = vs_crtc_atomic_destroy_state,
+       .enable_vblank          = vs_crtc_enable_vblank,
+       .disable_vblank         = vs_crtc_disable_vblank,
+       .atomic_print_state = vs_crtc_atomic_print_state,
+};
+
+static void vs_crtc_atomic_enable(struct drm_crtc *crtc,
+                                 struct drm_atomic_state *state)
+{
+       struct vs_crtc *vs_crtc = to_vs_crtc(crtc);
+       struct vs_dc *dc = dev_get_drvdata(vs_crtc->dev);
+
+       vs_dc_enable(dc, crtc);
+       drm_crtc_vblank_on(crtc);
+}
+
+static void vs_crtc_atomic_disable(struct drm_crtc *crtc,
+                                  struct drm_atomic_state *state)
+{
+       struct vs_crtc *vs_crtc = to_vs_crtc(crtc);
+       struct vs_dc *dc = dev_get_drvdata(vs_crtc->dev);
+
+       drm_crtc_vblank_off(crtc);
+
+       vs_dc_disable(dc, crtc);
+
+       if (crtc->state->event && !crtc->state->active) {
+               spin_lock_irq(&crtc->dev->event_lock);
+               drm_crtc_send_vblank_event(crtc, crtc->state->event);
+               crtc->state->event = NULL;
+               spin_unlock_irq(&crtc->dev->event_lock);
+       }
+}
+
+static void vs_crtc_atomic_begin(struct drm_crtc *crtc,
+                                struct drm_atomic_state *state)
+{
+       struct drm_crtc_state *new_state = drm_atomic_get_new_crtc_state(state,
+                                                                         crtc);
+
+       struct vs_crtc *vs_crtc = to_vs_crtc(crtc);
+       struct device *dev = vs_crtc->dev;
+       struct drm_property_blob *blob = new_state->gamma_lut;
+       struct drm_color_lut *lut;
+       struct vs_dc *dc = dev_get_drvdata(dev);
+
+       if (new_state->color_mgmt_changed) {
+               if (blob && blob->length) {
+                       lut = blob->data;
+                       vs_dc_set_gamma(dc, crtc, lut,
+                                       blob->length / sizeof(*lut));
+                       vs_dc_enable_gamma(dc, crtc, true);
+               } else {
+                       vs_dc_enable_gamma(dc, crtc, false);
+               }
+       }
+}
+
+static void vs_crtc_atomic_flush(struct drm_crtc *crtc,
+                                struct drm_atomic_state *state)
+{
+       struct vs_crtc *vs_crtc = to_vs_crtc(crtc);
+       struct drm_pending_vblank_event *event = crtc->state->event;
+       struct vs_dc *dc = dev_get_drvdata(vs_crtc->dev);
+
+       vs_dc_commit(dc);
+
+       if (event) {
+               WARN_ON(drm_crtc_vblank_get(crtc) != 0);
+
+               spin_lock_irq(&crtc->dev->event_lock);
+               drm_crtc_arm_vblank_event(crtc, event);
+               crtc->state->event = NULL;
+               spin_unlock_irq(&crtc->dev->event_lock);
+       }
+}
+
+static const struct drm_crtc_helper_funcs vs_crtc_helper_funcs = {
+       .atomic_check = drm_crtc_helper_atomic_check,
+       .atomic_enable  = vs_crtc_atomic_enable,
+       .atomic_disable = vs_crtc_atomic_disable,
+       .atomic_begin   = vs_crtc_atomic_begin,
+       .atomic_flush   = vs_crtc_atomic_flush,
+};
+
+struct vs_crtc *vs_crtc_create(struct drm_device *drm_dev,
+                              struct vs_dc_info *info)
+{
+       struct vs_crtc *crtc;
+       int ret;
+
+       if (!info)
+               return NULL;
+
+       crtc = drmm_crtc_alloc_with_planes(drm_dev, struct vs_crtc, base, NULL,
+                                          NULL, &vs_crtc_funcs,
+                                          info->name ? info->name : NULL);
+
+       drm_crtc_helper_add(&crtc->base, &vs_crtc_helper_funcs);
+
+       if (info->gamma_size) {
+               ret = drm_mode_crtc_set_gamma_size(&crtc->base,
+                                                  info->gamma_size);
+               if (ret)
+                       return NULL;
+
+               drm_crtc_enable_color_mgmt(&crtc->base, 0, false,
+                                          info->gamma_size);
+       }
+
+       crtc->max_bpc = info->max_bpc;
+       crtc->color_formats = info->color_formats;
+       return crtc;
+}
drivers/gpu/drm/verisilicon/vs_crtc.h new file +42 -0
new file mode 100644
index 000000000000..8f5b5718283f
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2023 VeriSilicon Holdings Co., Ltd.
+ */
+
+#ifndef __VS_CRTC_H__
+#define __VS_CRTC_H__
+
+#include <drm/drm_crtc.h>
+#include <drm/drm_crtc_helper.h>
+
+#include "vs_type.h"
+
+struct vs_crtc_state {
+       struct drm_crtc_state base;
+
+       u32 output_fmt;
+       u8 encoder_type;
+       u8 bpp;
+};
+
+struct vs_crtc {
+       struct drm_crtc base;
+       struct device *dev;
+       unsigned int max_bpc;
+       unsigned int color_formats;
+};
+
+struct vs_crtc *vs_crtc_create(struct drm_device *drm_dev,
+                              struct vs_dc_info *info);
+
+static inline struct vs_crtc *to_vs_crtc(struct drm_crtc *crtc)
+{
+       return container_of(crtc, struct vs_crtc, base);
+}
+
+static inline struct vs_crtc_state *
+to_vs_crtc_state(struct drm_crtc_state *state)
+{
+       return container_of(state, struct vs_crtc_state, base);
+}
+#endif /* __VS_CRTC_H__ */
drivers/gpu/drm/verisilicon/vs_dc.c new file +100 -0
new file mode 100644
index 000000000000..3f1e70ba4261
@@ -0,0 +1,1192 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 VeriSilicon Holdings Co., Ltd.
+ */
+
+#include <linux/component.h>
+#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/of_graph.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_blend.h>
+#include <drm/drm_framebuffer.h>
+#include <drm/drm_vblank.h>
+
+#include "vs_dc_hw.h"
+#include "vs_dc.h"
+#include "vs_drv.h"
+
+static const char * const vout_clocks[] = {
+       "channel0",
+       "channel1",
+       "hdmi_tx",
+       "dc_parent",
+};
+
+#define FRAC_16_16(mult, div)   (((mult) << 16) / (div))
+
+static const u32 primary_overlay_format0[] = {
+       DRM_FORMAT_RGB565,
+       DRM_FORMAT_BGR565,
+       DRM_FORMAT_XRGB8888,
+       DRM_FORMAT_XBGR8888,
+       DRM_FORMAT_RGBX8888,
+       DRM_FORMAT_BGRX8888,
+       DRM_FORMAT_ARGB8888,
+       DRM_FORMAT_ABGR8888,
+       DRM_FORMAT_RGBA8888,
+       DRM_FORMAT_BGRA8888,
+       DRM_FORMAT_XRGB4444,
+       DRM_FORMAT_XBGR4444,
+       DRM_FORMAT_RGBX4444,
+       DRM_FORMAT_BGRX4444,
+       DRM_FORMAT_ARGB4444,
+       DRM_FORMAT_ABGR4444,
+       DRM_FORMAT_RGBA4444,
+       DRM_FORMAT_BGRA4444,
+       DRM_FORMAT_XRGB1555,
+       DRM_FORMAT_XBGR1555,
+       DRM_FORMAT_RGBX5551,
+       DRM_FORMAT_BGRX5551,
+       DRM_FORMAT_ARGB1555,
+       DRM_FORMAT_ABGR1555,
+       DRM_FORMAT_RGBA5551,
+       DRM_FORMAT_BGRA5551,
+       DRM_FORMAT_ARGB2101010,
+       DRM_FORMAT_ABGR2101010,
+       DRM_FORMAT_RGBA1010102,
+       DRM_FORMAT_BGRA1010102,
+       DRM_FORMAT_YUYV,
+       DRM_FORMAT_YVYU,
+       DRM_FORMAT_UYVY,
+       DRM_FORMAT_VYUY,
+       DRM_FORMAT_YVU420,
+       DRM_FORMAT_YUV420,
+       DRM_FORMAT_NV12,
+       DRM_FORMAT_NV21,
+       DRM_FORMAT_NV16,
+       DRM_FORMAT_NV61,
+       DRM_FORMAT_P010,
+};
+
+static const u32 primary_overlay_format1[] = {
+       DRM_FORMAT_XRGB8888,
+       DRM_FORMAT_XBGR8888,
+       DRM_FORMAT_RGBX8888,
+       DRM_FORMAT_BGRX8888,
+       DRM_FORMAT_ARGB8888,
+       DRM_FORMAT_ABGR8888,
+       DRM_FORMAT_RGBA8888,
+       DRM_FORMAT_BGRA8888,
+       DRM_FORMAT_ARGB2101010,
+       DRM_FORMAT_ABGR2101010,
+       DRM_FORMAT_RGBA1010102,
+       DRM_FORMAT_BGRA1010102,
+       DRM_FORMAT_NV12,
+       DRM_FORMAT_NV21,
+       DRM_FORMAT_YUV444,
+};
+
+static const u32 cursor_formats[] = {
+       DRM_FORMAT_ARGB8888
+};
+
+static const u64 format_modifier0[] = {

drivers/gpu/drm/verisilicon/vs_dc.c line 110

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_dc.c new file +10 -0
+       DRM_FORMAT_MOD_LINEAR,
+       DRM_FORMAT_MOD_INVALID
+};
+
+static const u64 secondary_format_modifiers[] = {
+       DRM_FORMAT_MOD_LINEAR,
+       DRM_FORMAT_MOD_INVALID
+};
+
+static const struct vs_plane_info dc_hw_planes_rev0[PLANE_NUM] = {

What is the difference between PRIMARY_PLANE_0 and PRIMARY_PLANE_1? And between different overlay planes? I think you are mixing the 'plane kind' vs 'plane enumeration' here.
If you really wish to have 'plane kind' structures, please have one for the primary plane, one for the overlay and one for the cursor.

Quoted 659 lines
drivers/gpu/drm/verisilicon/vs_dc.c new file +656 -0
+       {
+               .name                   = "Primary",
+               .id                     = PRIMARY_PLANE_0,
+               .type                   = DRM_PLANE_TYPE_PRIMARY,
+               .num_formats            = ARRAY_SIZE(primary_overlay_format0),
+               .formats                = primary_overlay_format0,
+               .num_modifiers          = ARRAY_SIZE(format_modifier0),
+               .modifiers              = format_modifier0,
+               .min_width              = 0,
+               .min_height             = 0,
+               .max_width              = 4096,
+               .max_height             = 4096,
+               .rotation               = DRM_MODE_ROTATE_0 |
+                                         DRM_MODE_ROTATE_90 |
+                                         DRM_MODE_ROTATE_180 |
+                                         DRM_MODE_ROTATE_270 |
+                                         DRM_MODE_REFLECT_X |
+                                         DRM_MODE_REFLECT_Y,
+               .blend_mode             = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+                                         BIT(DRM_MODE_BLEND_PREMULTI) |
+                                         BIT(DRM_MODE_BLEND_COVERAGE),
+               .color_encoding         = BIT(DRM_COLOR_YCBCR_BT709) |
+                                         BIT(DRM_COLOR_YCBCR_BT2020),
+               .degamma_size           = DEGAMMA_SIZE,
+               .min_scale              = FRAC_16_16(1, 3),
+               .max_scale              = FRAC_16_16(10, 1),
+               .zpos                   = 0,
+               .watermark              = true,
+               .color_mgmt             = true,
+               .roi                    = true,
+       },
+       {
+               .name                   = "Overlay",
+               .id                     = OVERLAY_PLANE_0,
+               .type                   = DRM_PLANE_TYPE_OVERLAY,
+               .num_formats            = ARRAY_SIZE(primary_overlay_format0),
+               .formats                = primary_overlay_format0,
+               .num_modifiers          = ARRAY_SIZE(format_modifier0),
+               .modifiers              = format_modifier0,
+               .min_width              = 0,
+               .min_height             = 0,
+               .max_width              = 4096,
+               .max_height             = 4096,
+               .rotation               = DRM_MODE_ROTATE_0 |
+                                         DRM_MODE_ROTATE_90 |
+                                         DRM_MODE_ROTATE_180 |
+                                         DRM_MODE_ROTATE_270 |
+                                         DRM_MODE_REFLECT_X |
+                                         DRM_MODE_REFLECT_Y,
+               .blend_mode             = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+                                         BIT(DRM_MODE_BLEND_PREMULTI) |
+                                         BIT(DRM_MODE_BLEND_COVERAGE),
+               .color_encoding         = BIT(DRM_COLOR_YCBCR_BT709) |
+                                         BIT(DRM_COLOR_YCBCR_BT2020),
+               .degamma_size           = DEGAMMA_SIZE,
+               .min_scale              = FRAC_16_16(1, 3),
+               .max_scale              = FRAC_16_16(10, 1),
+               .zpos                   = 1,
+               .watermark              = true,
+               .color_mgmt             = true,
+               .roi                    = true,
+       },
+       {
+               .name                   = "Overlay_1",
+               .id                     = OVERLAY_PLANE_1,
+               .type                   = DRM_PLANE_TYPE_OVERLAY,
+               .num_formats            = ARRAY_SIZE(primary_overlay_format0),
+               .formats                = primary_overlay_format0,
+               .num_modifiers          = ARRAY_SIZE(secondary_format_modifiers),
+               .modifiers              = secondary_format_modifiers,
+               .min_width              = 0,
+               .min_height             = 0,
+               .max_width              = 4096,
+               .max_height             = 4096,
+               .rotation               = 0,
+               .blend_mode             = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+                                         BIT(DRM_MODE_BLEND_PREMULTI) |
+                                         BIT(DRM_MODE_BLEND_COVERAGE),
+               .color_encoding         = BIT(DRM_COLOR_YCBCR_BT709) |
+                                         BIT(DRM_COLOR_YCBCR_BT2020),
+               .degamma_size           = DEGAMMA_SIZE,
+               .min_scale              = DRM_PLANE_NO_SCALING,
+               .max_scale              = DRM_PLANE_NO_SCALING,
+               .zpos                   = 2,
+               .watermark              = true,
+               .color_mgmt             = true,
+               .roi                    = true,
+       },
+       {
+               .name                   = "Primary_1",
+               .id                     = PRIMARY_PLANE_1,
+               .type                   = DRM_PLANE_TYPE_PRIMARY,
+               .num_formats            = ARRAY_SIZE(primary_overlay_format0),
+               .formats                = primary_overlay_format0,
+               .num_modifiers          = ARRAY_SIZE(format_modifier0),
+               .modifiers              = format_modifier0,
+               .min_width              = 0,
+               .min_height             = 0,
+               .max_width              = 4096,
+               .max_height             = 4096,
+               .rotation               = DRM_MODE_ROTATE_0 |
+                                         DRM_MODE_ROTATE_90 |
+                                         DRM_MODE_ROTATE_180 |
+                                         DRM_MODE_ROTATE_270 |
+                                         DRM_MODE_REFLECT_X |
+                                         DRM_MODE_REFLECT_Y,
+               .blend_mode             = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+                                         BIT(DRM_MODE_BLEND_PREMULTI) |
+                                         BIT(DRM_MODE_BLEND_COVERAGE),
+               .color_encoding         = BIT(DRM_COLOR_YCBCR_BT709) |
+                                         BIT(DRM_COLOR_YCBCR_BT2020),
+               .degamma_size           = DEGAMMA_SIZE,
+               .min_scale              = FRAC_16_16(1, 3),
+               .max_scale              = FRAC_16_16(10, 1),
+               .zpos                   = 3,
 
 
 
+               .watermark              = true,
+               .color_mgmt             = true,
+               .roi                    = true,
+       },
+       {
+               .name                   = "Overlay_2",
+               .id                     = OVERLAY_PLANE_2,
+               .type                   = DRM_PLANE_TYPE_OVERLAY,
+               .num_formats            = ARRAY_SIZE(primary_overlay_format0),
+               .formats                = primary_overlay_format0,
+               .num_modifiers          = ARRAY_SIZE(format_modifier0),
+               .modifiers              = format_modifier0,
+               .min_width              = 0,
+               .min_height             = 0,
+               .max_width              = 4096,
+               .max_height             = 4096,
+               .rotation               = DRM_MODE_ROTATE_0 |
+                                         DRM_MODE_ROTATE_90 |
+                                         DRM_MODE_ROTATE_180 |
+                                         DRM_MODE_ROTATE_270 |
+                                         DRM_MODE_REFLECT_X |
+                                         DRM_MODE_REFLECT_Y,
+               .blend_mode             = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+                                         BIT(DRM_MODE_BLEND_PREMULTI) |
+                                         BIT(DRM_MODE_BLEND_COVERAGE),
+               .color_encoding         = BIT(DRM_COLOR_YCBCR_BT709) |
+                                         BIT(DRM_COLOR_YCBCR_BT2020),
+               .degamma_size           = DEGAMMA_SIZE,
+               .min_scale              = FRAC_16_16(1, 3),
+               .max_scale              = FRAC_16_16(10, 1),
+               .zpos                   = 4,
+               .watermark              = true,
+               .color_mgmt             = true,
+               .roi                    = true,
+       },
+       {
+               .name                   = "Overlay_3",
+               .id                     = OVERLAY_PLANE_3,
+               .type                   = DRM_PLANE_TYPE_OVERLAY,
+               .num_formats            = ARRAY_SIZE(primary_overlay_format0),
+               .formats                = primary_overlay_format0,
+               .num_modifiers          = ARRAY_SIZE(secondary_format_modifiers),
+               .modifiers              = secondary_format_modifiers,
+               .min_width              = 0,
+               .min_height             = 0,
+               .max_width              = 4096,
+               .max_height             = 4096,
+               .rotation               = 0,
+               .blend_mode             = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+                                         BIT(DRM_MODE_BLEND_PREMULTI) |
+                                         BIT(DRM_MODE_BLEND_COVERAGE),
+               .color_encoding         = BIT(DRM_COLOR_YCBCR_BT709) |
+                                         BIT(DRM_COLOR_YCBCR_BT2020),
+               .degamma_size           = DEGAMMA_SIZE,
+               .min_scale              = DRM_PLANE_NO_SCALING,
+               .max_scale              = DRM_PLANE_NO_SCALING,
+               .zpos                   = 5,
+               .watermark              = true,
+               .color_mgmt             = true,
+               .roi                    = true,
+       },
+       {
+               .name                   = "Cursor",
+               .id                     = CURSOR_PLANE_0,
+               .type                   = DRM_PLANE_TYPE_CURSOR,
+               .num_formats            = ARRAY_SIZE(cursor_formats),
+               .formats                = cursor_formats,
+               .num_modifiers          = 0,
+               .modifiers              = NULL,
+               .min_width              = 32,
+               .min_height             = 32,
+               .max_width              = 64,
+               .max_height             = 64,
+               .rotation               = 0,
+               .degamma_size           = 0,
+               .min_scale              = DRM_PLANE_NO_SCALING,
+               .max_scale              = DRM_PLANE_NO_SCALING,
+               .zpos                   = 255,
+               .watermark              = false,
+               .color_mgmt             = false,
+               .roi                    = false,
+       },
+       {
+               .name                   = "Cursor_1",
+               .id                     = CURSOR_PLANE_1,
+               .type                   = DRM_PLANE_TYPE_CURSOR,
+               .num_formats            = ARRAY_SIZE(cursor_formats),
+               .formats                = cursor_formats,
+               .num_modifiers          = 0,
+               .modifiers              = NULL,
+               .min_width              = 32,
+               .min_height             = 32,
+               .max_width              = 64,
+               .max_height             = 64,
+               .rotation               = 0,
+               .degamma_size           = 0,
+               .min_scale              = DRM_PLANE_NO_SCALING,
+               .max_scale              = DRM_PLANE_NO_SCALING,
+               .zpos                   = 255,
+               .watermark              = false,
+               .color_mgmt             = false,
+               .roi                    = false,
+       },
+};
+
+static const struct vs_dc_info dc8200_info = {
+       .name                   = "DC8200",
+       .panel_num              = 2,
+       .plane_num              = 8,
+       .planes                 = dc_hw_planes_rev0,
+       .layer_num              = 6,
+       .max_bpc                = 10,
+       .color_formats          = DRM_COLOR_FORMAT_RGB444 |
+                                 DRM_COLOR_FORMAT_YCBCR444 |
+                                 DRM_COLOR_FORMAT_YCBCR422 |
+                                 DRM_COLOR_FORMAT_YCBCR420,
+       .gamma_size             = GAMMA_EX_SIZE,
+       .gamma_bits             = 12,
+       .pitch_alignment        = 128,
+       .pipe_sync              = false,
+       .background             = true,
+       .panel_sync             = true,
+       .cap_dec                = true,
+};
+
+static inline void update_format(u32 format, u64 mod, struct dc_hw_fb *fb)
+{
+       u8 f = FORMAT_A8R8G8B8;
+
+       switch (format) {
+       case DRM_FORMAT_XRGB4444:
+       case DRM_FORMAT_RGBX4444:
+       case DRM_FORMAT_XBGR4444:
+       case DRM_FORMAT_BGRX4444:
+               f = FORMAT_X4R4G4B4;
+               break;
+       case DRM_FORMAT_ARGB4444:
+       case DRM_FORMAT_RGBA4444:
+       case DRM_FORMAT_ABGR4444:
+       case DRM_FORMAT_BGRA4444:
+               f = FORMAT_A4R4G4B4;
+               break;
+       case DRM_FORMAT_XRGB1555:
+       case DRM_FORMAT_RGBX5551:
+       case DRM_FORMAT_XBGR1555:
+       case DRM_FORMAT_BGRX5551:
+               f = FORMAT_X1R5G5B5;
+               break;
+       case DRM_FORMAT_ARGB1555:
+       case DRM_FORMAT_RGBA5551:
+       case DRM_FORMAT_ABGR1555:
+       case DRM_FORMAT_BGRA5551:
+               f = FORMAT_A1R5G5B5;
+               break;
+       case DRM_FORMAT_RGB565:
+       case DRM_FORMAT_BGR565:
+               f = FORMAT_R5G6B5;
+               break;
+       case DRM_FORMAT_XRGB8888:
+       case DRM_FORMAT_RGBX8888:
+       case DRM_FORMAT_XBGR8888:
+       case DRM_FORMAT_BGRX8888:
+               f = FORMAT_X8R8G8B8;
+               break;
+       case DRM_FORMAT_ARGB8888:
+       case DRM_FORMAT_RGBA8888:
+       case DRM_FORMAT_ABGR8888:
+       case DRM_FORMAT_BGRA8888:
+               f = FORMAT_A8R8G8B8;
+               break;
+       case DRM_FORMAT_YUYV:
+       case DRM_FORMAT_YVYU:
+               f = FORMAT_YUY2;
+               break;
+       case DRM_FORMAT_UYVY:
+       case DRM_FORMAT_VYUY:
+               f = FORMAT_UYVY;
+               break;
+       case DRM_FORMAT_YUV420:
+       case DRM_FORMAT_YVU420:
+               f = FORMAT_YV12;
+               break;
+       case DRM_FORMAT_NV21:
+               f = FORMAT_NV12;
+               break;
+       case DRM_FORMAT_NV16:
+       case DRM_FORMAT_NV61:
+               f = FORMAT_NV16;
+               break;
+       case DRM_FORMAT_P010:
+               f = FORMAT_P010;
+               break;
+       case DRM_FORMAT_ARGB2101010:
+       case DRM_FORMAT_RGBA1010102:
+       case DRM_FORMAT_ABGR2101010:
+       case DRM_FORMAT_BGRA1010102:
+               f = FORMAT_A2R10G10B10;
+               break;
+       case DRM_FORMAT_NV12:
+               f = FORMAT_NV12;
+               break;
+       case DRM_FORMAT_YUV444:
+               f = FORMAT_YUV444;
+               break;
+       default:
+               break;
+       }
+
+       fb->format = f;
+}
+
+static inline void update_swizzle(u32 format, struct dc_hw_fb *fb)
+{
+       fb->swizzle = SWIZZLE_ARGB;
+       fb->uv_swizzle = 0;
+
+       switch (format) {
+       case DRM_FORMAT_RGBX4444:
+       case DRM_FORMAT_RGBA4444:
+       case DRM_FORMAT_RGBX5551:
+       case DRM_FORMAT_RGBA5551:
+       case DRM_FORMAT_RGBX8888:
+       case DRM_FORMAT_RGBA8888:
+       case DRM_FORMAT_RGBA1010102:
+               fb->swizzle = SWIZZLE_RGBA;
+               break;
+       case DRM_FORMAT_XBGR4444:
+       case DRM_FORMAT_ABGR4444:
+       case DRM_FORMAT_XBGR1555:
+       case DRM_FORMAT_ABGR1555:
+       case DRM_FORMAT_BGR565:
+       case DRM_FORMAT_XBGR8888:
+       case DRM_FORMAT_ABGR8888:
+       case DRM_FORMAT_ABGR2101010:
+               fb->swizzle = SWIZZLE_ABGR;
+               break;
+       case DRM_FORMAT_BGRX4444:
+       case DRM_FORMAT_BGRA4444:
+       case DRM_FORMAT_BGRX5551:
+       case DRM_FORMAT_BGRA5551:
+       case DRM_FORMAT_BGRX8888:
+       case DRM_FORMAT_BGRA8888:
+       case DRM_FORMAT_BGRA1010102:
+               fb->swizzle = SWIZZLE_BGRA;
+               break;
+       case DRM_FORMAT_YVYU:
+       case DRM_FORMAT_VYUY:
+       case DRM_FORMAT_NV21:
+       case DRM_FORMAT_NV61:
+               fb->uv_swizzle = 1;
+               break;
+       default:
+               break;
+       }
+}
+
+static inline u8 to_vs_rotation(unsigned int rotation)
+{
+       u8 rot;
+
+       switch (rotation & DRM_MODE_REFLECT_MASK) {
+       case DRM_MODE_REFLECT_X:
+               rot = FLIP_X;
+               return rot;
+       case DRM_MODE_REFLECT_Y:
+               rot = FLIP_Y;
+               return rot;
+       case DRM_MODE_REFLECT_X | DRM_MODE_REFLECT_Y:
+               rot = FLIP_XY;
+               return rot;
+       default:
+               break;
+       }
+
+       switch (rotation & DRM_MODE_ROTATE_MASK) {
+       case DRM_MODE_ROTATE_0:
+               rot = ROT_0;
+               break;
+       case DRM_MODE_ROTATE_90:
+               rot = ROT_90;
+               break;
+       case DRM_MODE_ROTATE_180:
+               rot = ROT_180;
+               break;
+       case DRM_MODE_ROTATE_270:
+               rot = ROT_270;
+               break;
+       default:
+               rot = ROT_0;
+               break;
+       }
+
+       return rot;
+}
+
+static inline u8 to_vs_yuv_color_space(u32 color_space)
+{
+       u8 cs;
+
+       switch (color_space) {
+       case DRM_COLOR_YCBCR_BT601:
+               cs = COLOR_SPACE_601;
+               break;
+       case DRM_COLOR_YCBCR_BT709:
+               cs = COLOR_SPACE_709;
+               break;
+       case DRM_COLOR_YCBCR_BT2020:
+               cs = COLOR_SPACE_2020;
+               break;
+       default:
+               cs = COLOR_SPACE_601;
+               break;
+       }
+
+       return cs;
+}
+
+static inline u8 to_vs_display_id(struct vs_dc *dc, struct drm_crtc *crtc)
+{
+       u8 panel_num = dc->hw.info->panel_num;
+       u32 index = drm_crtc_index(crtc);
+       int i;
+
+       for (i = 0; i < panel_num; i++) {
+               if (index == dc->crtc[i]->base.index)
+                       return i;
+       }
+
+       return 0;
+}
+
+static void vs_drm_update_pitch_alignment(struct drm_device *drm_dev,
+                                         unsigned int alignment)
+{
+       struct vs_drm_device *priv = to_vs_drm_private(drm_dev);
+
+       if (alignment > priv->pitch_alignment)
+               priv->pitch_alignment = alignment;
+}
+
+static int plda_clk_rst_init(struct device *dev)
+{
+       struct vs_dc *dc = dev_get_drvdata(dev);
+
+       return clk_bulk_prepare_enable(dc->nclks, dc->clk_vout);
+}
+
+static void plda_clk_rst_deinit(struct device *dev)
+{
+       struct vs_dc *dc = dev_get_drvdata(dev);
+
+       clk_bulk_disable_unprepare(dc->nclks, dc->clk_vout);
+}
+
+static void dc_deinit(struct device *dev)
+{
+       struct vs_dc *dc = dev_get_drvdata(dev);
+
+       dc_hw_enable_interrupt(&dc->hw, 0);
+       dc_hw_deinit(&dc->hw);
+       plda_clk_rst_deinit(dev);
+}
+
+static int dc_init(struct device *dev)
+{
+       struct vs_dc *dc = dev_get_drvdata(dev);
+       int ret;
+
+       ret = plda_clk_rst_init(dev);
+       if (ret < 0) {
+               dev_err(dev, "failed to init dc clk reset: %d\n", ret);
+               return ret;
+       }
+
+       ret = dc_hw_init(&dc->hw);
+       if (ret) {
+               dev_err(dev, "failed to init DC HW\n");
+               return ret;
+       }
+       return 0;
+}
+
+void vs_dc_enable(struct vs_dc *dc, struct drm_crtc *crtc)
+{
+       struct vs_crtc_state *crtc_state = to_vs_crtc_state(crtc->state);
+       struct drm_display_mode *mode = &crtc->state->adjusted_mode;
+       struct dc_hw_display display;
+
+       display.bus_format = crtc_state->output_fmt;
+       display.h_active = mode->hdisplay;
+       display.h_total = mode->htotal;
+       display.h_sync_start = mode->hsync_start;
+       display.h_sync_end = mode->hsync_end;
+       if (mode->flags & DRM_MODE_FLAG_PHSYNC)
+               display.h_sync_polarity = true;
+       else
+               display.h_sync_polarity = false;
+
+       display.v_active = mode->vdisplay;
+       display.v_total = mode->vtotal;
+       display.v_sync_start = mode->vsync_start;
+       display.v_sync_end = mode->vsync_end;
+
+       if (mode->flags & DRM_MODE_FLAG_PVSYNC)
+               display.v_sync_polarity = true;
+       else
+               display.v_sync_polarity = false;
+
+       display.id = to_vs_display_id(dc, crtc);
+
+       display.enable = true;
+
+       if (crtc_state->encoder_type == DRM_MODE_ENCODER_DSI) {
+               dc_hw_set_out(&dc->hw, OUT_DPI, display.id);
+               clk_set_rate(dc->clk_vout[CLK_VOUT_SOC_PIX].clk, mode->clock * 1000);
+               clk_set_parent(dc->clk_vout[CLK_VOUT_PIX1].clk,
+                              dc->clk_vout[CLK_VOUT_SOC_PIX].clk);
+       } else {
+               dc_hw_set_out(&dc->hw, OUT_DP, display.id);
+               clk_set_parent(dc->clk_vout[CLK_VOUT_PIX0].clk,
+                              dc->clk_vout[CLK_VOUT_HDMI_PIX].clk);
+       }
+
+       dc_hw_setup_display(&dc->hw, &display);
+
+       enable_irq(dc->irq);
+}
+
+void vs_dc_disable(struct vs_dc *dc, struct drm_crtc *crtc)
+{
+       struct dc_hw_display display;
+
+       disable_irq(dc->irq);
+
+       display.id = to_vs_display_id(dc, crtc);
+       display.enable = false;
+
+       dc_hw_setup_display(&dc->hw, &display);
+}
+
+void vs_dc_set_gamma(struct vs_dc *dc, struct drm_crtc *crtc,
+                    struct drm_color_lut *lut, unsigned int size)
+{
+       u16 i, r, g, b;
+       u8 bits, id;
+
+       if (size != dc->hw.info->gamma_size) {
+               drm_err(crtc->dev, "gamma size does not match!\n");
+               return;
+       }
+
+       id = to_vs_display_id(dc, crtc);
+
+       bits = dc->hw.info->gamma_bits;
+       for (i = 0; i < size; i++) {
+               r = drm_color_lut_extract(lut[i].red, bits);
+               g = drm_color_lut_extract(lut[i].green, bits);
+               b = drm_color_lut_extract(lut[i].blue, bits);
+               dc_hw_update_gamma(&dc->hw, id, i, r, g, b);
+       }
+}
+
+void vs_dc_enable_gamma(struct vs_dc *dc, struct drm_crtc *crtc,
+                       bool enable)
+{
+       u8 id;
+
+       id = to_vs_display_id(dc, crtc);
+       dc_hw_enable_gamma(&dc->hw, id, enable);
+}
+
+void vs_dc_enable_vblank(struct vs_dc *dc, bool enable)
+{
+       dc_hw_enable_interrupt(&dc->hw, enable);
+}
+
+static u32 calc_factor(u32 src, u32 dest)
+{
+       u32 factor = 1 << 16;
+
+       if (src > 1 && dest > 1)
+               factor = ((src - 1) << 16) / (dest - 1);
+
+       return factor;
+}
+
+static void update_scale(struct drm_plane_state *state, struct dc_hw_roi *roi,
+                        struct dc_hw_scale *scale)
+{
+       int dst_w = drm_rect_width(&state->dst);
+       int dst_h = drm_rect_height(&state->dst);
+       int src_w, src_h, temp;
+
+       scale->enable = false;
+
+       if (roi->enable) {
+               src_w = roi->width;
+               src_h = roi->height;
+       } else {
+               src_w = drm_rect_width(&state->src) >> 16;
+               src_h = drm_rect_height(&state->src) >> 16;
+       }
+
+       if (drm_rotation_90_or_270(state->rotation)) {
+               temp = src_w;
+               src_w = src_h;
+               src_h = temp;
+       }
+
+       if (src_w != dst_w) {
+               scale->scale_factor_x = calc_factor(src_w, dst_w);
+               scale->enable = true;
+       } else {
+               scale->scale_factor_x = 1 << 16;
+       }
+       if (src_h != dst_h) {
+               scale->scale_factor_y = calc_factor(src_h, dst_h);
+               scale->enable = true;
+       } else {
+               scale->scale_factor_y = 1 << 16;
+       }
+}
+
+static void update_fb(struct vs_plane *plane, u8 display_id,
+                     struct dc_hw_fb *fb, struct drm_plane_state *state)
+{
+       struct vs_plane_state *plane_state = to_vs_plane_state(state);
+       struct drm_framebuffer *drm_fb = state->fb;
+       struct drm_rect *src = &state->src;
+
+       fb->display_id = display_id;
+       fb->y_address = plane_state->dma_addr[0];
+       fb->y_stride = drm_fb->pitches[0];
+       if (drm_fb->format->format == DRM_FORMAT_YVU420) {
+               fb->u_address = plane_state->dma_addr[2];
+               fb->v_address = plane_state->dma_addr[1];
+               fb->u_stride = drm_fb->pitches[2];
+               fb->v_stride = drm_fb->pitches[1];
+       } else {
+               fb->u_address = plane_state->dma_addr[1];
+               fb->v_address = plane_state->dma_addr[2];

drivers/gpu/drm/verisilicon/vs_dc.c line 776

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_dc.c new file +10 -0
+               fb->u_stride = drm_fb->pitches[1];
+               fb->v_stride = drm_fb->pitches[2];
+       }
+       fb->width = drm_rect_width(src) >> 16;
+       fb->height = drm_rect_height(src) >> 16;
+       fb->tile_mode = DRM_FORMAT_MOD_LINEAR;
+       fb->rotation = to_vs_rotation(state->rotation);
+       fb->yuv_color_space = to_vs_yuv_color_space(state->color_encoding);
+       fb->zpos = state->zpos;
+       fb->enable = state->visible;

Is there any reason to copy the plane state instead of using it directly?

Quoted 247 lines
drivers/gpu/drm/verisilicon/vs_dc.c new file +247 -0
+       update_format(drm_fb->format->format, drm_fb->modifier, fb);
+       update_swizzle(drm_fb->format->format, fb);
+}
+
+static void update_plane(struct vs_dc *dc, struct vs_plane *plane,
+                        struct drm_plane *drm_plane,
+                        struct drm_atomic_state *drm_state)
+{
+       struct dc_hw_fb fb = {0};
+       struct dc_hw_scale scale;
+       struct dc_hw_position pos;
+       struct dc_hw_blend blend;
+       struct dc_hw_roi roi;
+       struct drm_plane_state *state = drm_atomic_get_new_plane_state(drm_state,
+                                                                          drm_plane);
+       struct drm_rect *dest = &state->dst;
+       bool dec_enable = false;
+       u8 display_id = 0;
+
+       display_id = to_vs_display_id(dc, state->crtc);
+       update_fb(plane, display_id, &fb, state);
+       fb.dec_enable = dec_enable;
+       roi.enable = false;
+
+       update_scale(state, &roi, &scale);
+
+       pos.start_x = dest->x1;
+       pos.start_y = dest->y1;
+       pos.end_x = dest->x2;
+       pos.end_y = dest->y2;
+
+       blend.alpha = (u8)(state->alpha >> 8);
+       blend.blend_mode = (u8)(state->pixel_blend_mode);
+
+       dc_hw_update_plane(&dc->hw, plane->id, &fb, &scale, &pos, &blend);
+}
+
+static void update_cursor_size(struct drm_plane_state *state, struct dc_hw_cursor *cursor)
+{
+       u8 size_type;
+
+       switch (state->crtc_w) {
+       case 32:
+               size_type = CURSOR_SIZE_32X32;
+               break;
+       case 64:
+               size_type = CURSOR_SIZE_64X64;
+               break;
+       default:
+               size_type = CURSOR_SIZE_32X32;
+               break;
+       }
+
+       cursor->size = size_type;
+}
+
+static void update_cursor_plane(struct vs_dc *dc, struct vs_plane *plane,
+                               struct drm_plane *drm_plane,
+                               struct drm_atomic_state *drm_state)
+{
+       struct drm_plane_state *state = drm_atomic_get_new_plane_state(drm_state,
+                                                                      drm_plane);
+       struct vs_plane_state *plane_state = to_vs_plane_state(state);
+       struct drm_framebuffer *drm_fb = state->fb;
+       struct dc_hw_cursor cursor;
+
+       cursor.address = plane_state->dma_addr[0];
+       cursor.x = state->crtc_x;
+       cursor.y = state->crtc_y;
+       cursor.hot_x = drm_fb->hot_x;
+       cursor.hot_y = drm_fb->hot_y;
+       cursor.display_id = to_vs_display_id(dc, state->crtc);
+       update_cursor_size(state, &cursor);
+       cursor.enable = true;
+
+       dc_hw_update_cursor(&dc->hw, cursor.display_id, &cursor);
+}
+
+void vs_dc_update_plane(struct vs_dc *dc, struct vs_plane *plane,
+                       struct drm_plane *drm_plane,
+                       struct drm_atomic_state *drm_state)
+{
+       update_plane(dc, plane, drm_plane, drm_state);
+}
+
+void vs_dc_update_cursor_plane(struct vs_dc *dc, struct vs_plane *plane,
+                              struct drm_plane *drm_plane,
+                              struct drm_atomic_state *drm_state)
+{
+       update_cursor_plane(dc, plane, drm_plane, drm_state);
+}
+
+void vs_dc_disable_plane(struct vs_dc *dc, struct vs_plane *plane,
+                        struct drm_plane_state *old_state)
+{
+       struct dc_hw_fb fb = {0};
+
+       fb.enable = false;
+       dc_hw_update_plane(&dc->hw, plane->id, &fb, NULL, NULL, NULL);
+}
+
+void vs_dc_disable_cursor_plane(struct vs_dc *dc, struct vs_plane *plane,
+                               struct drm_plane_state *old_state)
+{
+       struct dc_hw_cursor cursor = {0};
+
+       cursor.enable = false;
+       cursor.display_id = to_vs_display_id(dc, old_state->crtc);
+       dc_hw_update_cursor(&dc->hw, cursor.display_id, &cursor);
+}
+
+static bool vs_dc_mod_supported(const struct vs_plane_info *plane_info,
+                               u64 modifier)
+{
+       const u64 *mods;
+
+       if (!plane_info->modifiers)
+               return false;
+
+       for (mods = plane_info->modifiers; *mods != DRM_FORMAT_MOD_INVALID; mods++) {
+               if (*mods == modifier)
+                       return true;
+       }
+
+       return false;
+}
+
+int vs_dc_check_plane(struct vs_dc *dc, struct drm_plane *plane,
+                     struct drm_atomic_state *state)
+{
+       struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state,
+                                                                                plane);
+
+       struct drm_framebuffer *fb = new_plane_state->fb;
+       const struct vs_plane_info *plane_info;
+       struct drm_crtc *crtc = new_plane_state->crtc;
+       struct drm_crtc_state *crtc_state;
+       struct vs_plane *vs_plane = to_vs_plane(plane);
+
+       plane_info = &dc->hw.info->planes[vs_plane->id];
+
+       if (fb->width < plane_info->min_width ||
+           fb->width > plane_info->max_width ||
+           fb->height < plane_info->min_height ||
+           fb->height > plane_info->max_height)
+               drm_err_once(plane->dev, "buffer size may not support on plane%d.\n",
+                            vs_plane->id);
+
+       if (!vs_dc_mod_supported(plane_info, fb->modifier)) {
+               drm_err(plane->dev, "unsupported modifier on plane%d.\n", vs_plane->id);
+               return -EINVAL;
+       }
+
+       crtc_state = drm_atomic_get_existing_crtc_state(state, crtc);
+       return drm_atomic_helper_check_plane_state(new_plane_state, crtc_state,
+                                                 plane_info->min_scale,
+                                                 plane_info->max_scale,
+                                                 true, true);
+}
+
+int vs_dc_check_cursor_plane(struct vs_dc *dc, struct drm_plane *plane,
+                            struct drm_atomic_state *state)
+{
+       struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state,
+                                                                          plane);
+       struct drm_framebuffer *fb = new_plane_state->fb;
+       const struct vs_plane_info *plane_info;
+       struct drm_crtc *crtc = new_plane_state->crtc;
+       struct drm_crtc_state *crtc_state;
+       struct vs_plane *vs_plane = to_vs_plane(plane);
+
+       plane_info = &dc->hw.info->planes[vs_plane->id];
+
+       if (fb->width < plane_info->min_width ||
+           fb->width > plane_info->max_width ||
+           fb->height < plane_info->min_height ||
+           fb->height > plane_info->max_height)
+               drm_err_once(plane->dev, "buffer size may not support on plane%d.\n", vs_plane->id);
+
+       crtc_state = drm_atomic_get_existing_crtc_state(state, crtc);
+       if (IS_ERR(crtc_state))
+               return -EINVAL;
+
+       return drm_atomic_helper_check_plane_state(new_plane_state, crtc_state,
+                                               plane_info->min_scale,
+                                               plane_info->max_scale,
+                                               true, true);
+}
+
+static irqreturn_t dc_isr(int irq, void *data)
+{
+       struct vs_dc *dc = data;
+       struct vs_dc_info *dc_info = dc->hw.info;
+       u32 i, ret;
+
+       if (!dc_info)
+               return IRQ_HANDLED;
+
+       ret = dc_hw_get_interrupt(&dc->hw);
+
+       for (i = 0; i < dc_info->panel_num; i++)
+               drm_crtc_handle_vblank(&dc->crtc[i]->base);
+
+       return IRQ_HANDLED;
+}
+
+void vs_dc_commit(struct vs_dc *dc)
+{
+       dc_hw_enable_shadow_register(&dc->hw, false);
+
+       dc_hw_commit(&dc->hw);
+
+       dc_hw_enable_shadow_register(&dc->hw, true);
+}
+
+static int dc_bind(struct device *dev, struct device *master, void *data)
+{
+       struct drm_device *drm_dev = data;
+       struct vs_dc *dc = dev_get_drvdata(dev);
+       struct device_node *port;
+       struct vs_crtc *crtc;
+       struct vs_dc_info *dc_info;
+       struct vs_plane *plane;
+       struct vs_plane_info *plane_info;
+       int i, ret;
+       u32 max_width = 0, max_height = 0;
+       u32 min_width = 0xffff, min_heigth = 0xffff;
+       u32 possible_crtc = 0;
+
+       if (!drm_dev || !dc) {
+               dev_err(dev, "devices are not created.\n");
+               return -ENODEV;
+       }
+
+       ret = dc_init(dev);
+       if (ret < 0) {
+               drm_err(drm_dev, "Failed to initialize DC hardware.\n");
+               return ret;
+       }
+
+       dc_info = dc->hw.info;
+
+       for (i = 0; i < dc_info->panel_num; i++) {
+               crtc = vs_crtc_create(drm_dev, dc_info);
+               if (!crtc) {
+                       drm_err(drm_dev, "Failed to create CRTC.\n");
+                       ret = -ENOMEM;

drivers/gpu/drm/verisilicon/vs_dc.c line 1033

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_dc.c new file +10 -0
+                       return ret;
+               }
+
+               port = of_graph_get_port_by_id(dev->of_node, i);
+               if (!port) {
+                       drm_err(drm_dev, "no port node found for crtc_port%d\n", i);
+                       return -ENOENT;
+               }
+
+               crtc->base.port = port;

When do you of_node_put() the node?

Quoted 105 lines
drivers/gpu/drm/verisilicon/vs_dc.c new file +105 -0
+               crtc->dev = dev;
+               dc->crtc[i] = crtc;
+       }
+
+       for (i = 0; i < dc_info->plane_num; i++) {
+               plane_info = (struct vs_plane_info *)&dc_info->planes[i];
+
+               if (!dc->crtc[0]->base.port || !dc->crtc[1]->base.port) {
+                       drm_err(drm_dev, "no port no crtc mask, fail to create plane\n");
+                       return -ENOENT;
+               }
+
+               if (plane_info->id == PRIMARY_PLANE_0 ||
+                   plane_info->id == CURSOR_PLANE_0) {
+                       possible_crtc = drm_crtc_mask(&dc->crtc[0]->base);
+               } else if (plane_info->id == PRIMARY_PLANE_1 ||
+                       plane_info->id == CURSOR_PLANE_1) {
+                       possible_crtc = drm_crtc_mask(&dc->crtc[1]->base);
+               } else {
+                       possible_crtc = drm_crtc_mask(&dc->crtc[0]->base) |
+                                       drm_crtc_mask(&dc->crtc[1]->base);
+               }
+
+               plane = vs_plane_create(drm_dev, plane_info,
+                                       dc_info->layer_num, possible_crtc);
+               if (IS_ERR(plane)) {
+                       dev_err(dev, "failed to construct plane\n");
+                       return PTR_ERR(plane);
+               }
+
+               plane->id = i;
+               dc->planes[i].id = plane_info->id;
+
+               if (plane_info->type == DRM_PLANE_TYPE_PRIMARY) {
+                       if (plane_info->id == PRIMARY_PLANE_0)
+                               dc->crtc[0]->base.primary = &plane->base;
+                       else
+                               dc->crtc[1]->base.primary = &plane->base;
+
+                       min_width = min_t(u32, min_width, plane_info->min_width);
+                       min_heigth = min_t(u32, min_heigth, plane_info->min_height);
+                       /*
+                        * Note: these values are used for multiple independent things:
+                        * hw display mode filtering, plane buffer sizes ...
+                        * Use the combined maximum values here to cover all use cases,
+                        * and do more specific checking in the respective code paths.
+                        */
+                       max_width = max_t(u32, max_width, plane_info->max_width);
+                       max_height = max_t(u32, max_height, plane_info->max_height);
+               }
+
+               if (plane_info->type == DRM_PLANE_TYPE_CURSOR) {
+                       if (plane_info->id == CURSOR_PLANE_0)
+                               dc->crtc[0]->base.cursor = &plane->base;
+                       else
+                               dc->crtc[1]->base.cursor = &plane->base;
+                       drm_dev->mode_config.cursor_width =
+                               max_t(u32, drm_dev->mode_config.cursor_width,
+                                     plane_info->max_width);
+                       drm_dev->mode_config.cursor_height =
+                               max_t(u32, drm_dev->mode_config.cursor_height,
+                                     plane_info->max_height);
+               }
+       }
+
+       drm_dev->mode_config.min_width = min_width;
+       drm_dev->mode_config.min_height = min_heigth;
+       drm_dev->mode_config.max_width = max_width;
+       drm_dev->mode_config.max_height = max_height;
+
+       vs_drm_update_pitch_alignment(drm_dev, dc_info->pitch_alignment);
+       return 0;
+}
+
+static void dc_unbind(struct device *dev, struct device *master, void *data)
+{
+       dc_deinit(dev);
+}
+
+const struct component_ops dc_component_ops = {
+       .bind = dc_bind,
+       .unbind = dc_unbind,
+};
+
+static const struct of_device_id dc_driver_dt_match[] = {
+       {
+               .compatible = "starfive,jh7110-dc8200",
+               .data = &dc8200_info,
+       },
+       {},
+};
+MODULE_DEVICE_TABLE(of, dc_driver_dt_match);
+
+static int dc_probe(struct platform_device *pdev)
+{
+       struct device *dev = &pdev->dev;
+       struct vs_dc *dc;
+       int ret, i;
+
+       dc = devm_kzalloc(dev, sizeof(*dc), GFP_KERNEL);
+       if (!dc)
+               return -ENOMEM;
+
+       dc->hw.hi_base = devm_platform_ioremap_resource(pdev, 0);
+       if (IS_ERR(dc->hw.hi_base))

drivers/gpu/drm/verisilicon/vs_dc.c line 1148

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_dc.c new file +10 -0
+               return PTR_ERR(dc->hw.hi_base);
+
+       dc->hw.reg_base = devm_platform_ioremap_resource(pdev, 1);
+       if (IS_ERR(dc->hw.reg_base))
+               return PTR_ERR(dc->hw.reg_base);
+
+       dc->nclks = ARRAY_SIZE(dc->clk_vout);
+       for (i = 0; i < dc->nclks; ++i)
+               dc->clk_vout[i].id = vout_clocks[i];
+       ret = devm_clk_bulk_get(dev, dc->nclks, dc->clk_vout);

devm_clk_bulk_get_all() ?

Quoted 460 lines
drivers/gpu/drm/verisilicon/vs_dc.c new file +44 -0
+       if (ret) {
+               dev_err(dev, "Failed to get clk controls\n");
+               return ret;
+       }
+
+       dc->irq = platform_get_irq(pdev, 0);
+
+       /* do not autoenable, will be enabled later */
+       ret = devm_request_irq(dev, dc->irq, dc_isr, IRQF_NO_AUTOEN, dev_name(dev), dc);
+       if (ret < 0) {
+               dev_err(dev, "Failed to install irq:%u.\n", dc->irq);
+               return ret;
+       }
+
+       dc->hw.info = (struct vs_dc_info *)of_device_get_match_data(dev);
+
+       dev_set_drvdata(dev, dc);
+
+       return component_add(dev, &dc_component_ops);
+}
+
+static int dc_remove(struct platform_device *pdev)
+{
+       struct device *dev = &pdev->dev;
+
+       component_del(dev, &dc_component_ops);
+
+       dev_set_drvdata(dev, NULL);
+
+       return 0;
+}
+
+struct platform_driver dc_platform_driver = {
+       .probe = dc_probe,
+       .remove = dc_remove,
+       .driver = {
+               .name = "vs-dc",
+               .of_match_table = of_match_ptr(dc_driver_dt_match),
+       },
+};
+
+MODULE_AUTHOR("StarFive Corporation");
+MODULE_DESCRIPTION("VeriSilicon DC Driver");
+MODULE_LICENSE("GPL");
drivers/gpu/drm/verisilicon/vs_dc.h new file +67 -0
new file mode 100644
index 000000000000..eeb5be0499ea
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2023 VeriSilicon Holdings Co., Ltd.
+ */
+
+#ifndef __VS_DC_H__
+#define __VS_DC_H__
+
+#include <linux/clk.h>
+#include <linux/mm_types.h>
+#include <linux/reset.h>
+
+#include <drm/drm_fourcc.h>
+#include <drm/drm_modes.h>
+
+#include "vs_crtc.h"
+#include "vs_dc_hw.h"
+#include "vs_plane.h"
+
+struct vs_dc_plane {
+       enum dc_hw_plane_id id;
+};
+
+enum vout_clk {
+       CLK_VOUT_PIX0,
+       CLK_VOUT_PIX1,
+       CLK_VOUT_HDMI_PIX,
+       CLK_VOUT_SOC_PIX,
+       CLK_VOUT_NUM
+};
+
+struct vs_dc {
+       struct vs_crtc          *crtc[DC_DISPLAY_NUM];
+       struct dc_hw            hw;
+
+       struct vs_dc_plane      planes[PLANE_NUM];
+       struct clk_bulk_data    clk_vout[CLK_VOUT_NUM];
+       int     nclks;
+       int irq;
+};
+
+void vs_dc_enable(struct vs_dc *dc, struct drm_crtc *crtc);
+void vs_dc_disable(struct vs_dc *dc, struct drm_crtc *crtc);
+
+void vs_dc_set_gamma(struct vs_dc *dc, struct drm_crtc *crtc,
+                    struct drm_color_lut *lut, unsigned int size);
+void vs_dc_enable_gamma(struct vs_dc *dc, struct drm_crtc *crtc, bool enable);
+void vs_dc_enable_vblank(struct vs_dc *dc, bool enable);
+void vs_dc_commit(struct vs_dc *dc);
+void vs_dc_update_plane(struct vs_dc *dc, struct vs_plane *plane,
+                       struct drm_plane *drm_plane,
+                       struct drm_atomic_state *drm_state);
+void vs_dc_disable_plane(struct vs_dc *dc, struct vs_plane *plane,
+                        struct drm_plane_state *old_state);
+int vs_dc_check_plane(struct vs_dc *dc, struct drm_plane *plane,
+                     struct drm_atomic_state *state);
+void vs_dc_update_cursor_plane(struct vs_dc *dc, struct vs_plane *plane,
+                              struct drm_plane *drm_plane,
+                              struct drm_atomic_state *drm_state);
+void vs_dc_disable_cursor_plane(struct vs_dc *dc, struct vs_plane *plane,
+                               struct drm_plane_state *old_state);
+int vs_dc_check_cursor_plane(struct vs_dc *dc, struct drm_plane *plane,
+                            struct drm_atomic_state *state);
+
+extern struct platform_driver dc_platform_driver;
+
+#endif /* __VS_DC_H__ */
drivers/gpu/drm/verisilicon/vs_dc_hw.c new file +337 -0
new file mode 100644
index 000000000000..d05ad3f00881
@@ -0,0 +1,1022 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 VeriSilicon Holdings Co., Ltd.
+ */
+
+#include <linux/bits.h>
+#include <linux/io.h>
+#include <linux/media-bus-format.h>
+//#include <drm/drm_atomic_helper.h>
+#include <drm/drm_blend.h>
+#include <drm/drm_fourcc.h>
+
+#include "vs_dc_hw.h"
+#include "vs_type.h"
+
+static const u32 horkernel[] = {
+       0x00000000, 0x20000000, 0x00002000, 0x00000000,
+       0x00000000, 0x00000000, 0x23fd1c03, 0x00000000,
+       0x00000000, 0x00000000, 0x181f0000, 0x000027e1,
+       0x00000000, 0x00000000, 0x00000000, 0x2b981468,
+       0x00000000, 0x00000000, 0x00000000, 0x10f00000,
+       0x00002f10, 0x00000000, 0x00000000, 0x00000000,
+       0x32390dc7, 0x00000000, 0x00000000, 0x00000000,
+       0x0af50000, 0x0000350b, 0x00000000, 0x00000000,
+       0x00000000, 0x3781087f, 0x00000000, 0x00000000,
+       0x00000000, 0x06660000, 0x0000399a, 0x00000000,
+       0x00000000, 0x00000000, 0x3b5904a7, 0x00000000,
+       0x00000000, 0x00000000, 0x033c0000, 0x00003cc4,
+       0x00000000, 0x00000000, 0x00000000, 0x3de1021f,
+       0x00000000, 0x00000000, 0x00000000, 0x01470000,
+       0x00003eb9, 0x00000000, 0x00000000, 0x00000000,
+       0x3f5300ad, 0x00000000, 0x00000000, 0x00000000,
+       0x00480000, 0x00003fb8, 0x00000000, 0x00000000,
+       0x00000000, 0x3fef0011, 0x00000000, 0x00000000,
+       0x00000000, 0x00000000, 0x00004000, 0x00000000,
+       0x00000000, 0x00000000, 0x20002000, 0x00000000,
+       0x00000000, 0x00000000, 0x1c030000, 0x000023fd,
+       0x00000000, 0x00000000, 0x00000000, 0x27e1181f,
+       0x00000000, 0x00000000, 0x00000000, 0x14680000,
+       0x00002b98, 0x00000000, 0x00000000, 0x00000000,
+       0x2f1010f0, 0x00000000, 0x00000000, 0x00000000,
+       0x0dc70000, 0x00003239, 0x00000000, 0x00000000,
+       0x00000000, 0x350b0af5, 0x00000000, 0x00000000,
+       0x00000000, 0x087f0000, 0x00003781, 0x00000000,
+       0x00000000, 0x00000000, 0x399a0666, 0x00000000,
+       0x00000000, 0x00000000, 0x04a70000, 0x00003b59,
+       0x00000000, 0x00000000, 0x00000000, 0x3cc4033c,
+       0x00000000, 0x00000000, 0x00000000, 0x021f0000,
+};
+
+#define H_COEF_SIZE ARRAY_SIZE(horkernel)
+
+static const u32 verkernel[] = {
+       0x00000000, 0x20000000, 0x00002000, 0x00000000,
+       0x00000000, 0x00000000, 0x23fd1c03, 0x00000000,
+       0x00000000, 0x00000000, 0x181f0000, 0x000027e1,
+       0x00000000, 0x00000000, 0x00000000, 0x2b981468,
+       0x00000000, 0x00000000, 0x00000000, 0x10f00000,
+       0x00002f10, 0x00000000, 0x00000000, 0x00000000,
+       0x32390dc7, 0x00000000, 0x00000000, 0x00000000,
+       0x0af50000, 0x0000350b, 0x00000000, 0x00000000,
+       0x00000000, 0x3781087f, 0x00000000, 0x00000000,
+       0x00000000, 0x06660000, 0x0000399a, 0x00000000,
+       0x00000000, 0x00000000, 0x3b5904a7, 0x00000000,
+       0x00000000, 0x00000000, 0x033c0000, 0x00003cc4,
+       0x00000000, 0x00000000, 0x00000000, 0x3de1021f,
+       0x00000000, 0x00000000, 0x00000000, 0x01470000,
+       0x00003eb9, 0x00000000, 0x00000000, 0x00000000,
+       0x3f5300ad, 0x00000000, 0x00000000, 0x00000000,
+       0x00480000, 0x00003fb8, 0x00000000, 0x00000000,
+       0x00000000, 0x3fef0011, 0x00000000, 0x00000000,
+       0x00000000, 0x00000000, 0x00004000, 0x00000000,
+       0xcdcd0000, 0xfdfdfdfd, 0xabababab, 0xabababab,
+       0x00000000, 0x00000000, 0x5ff5f456, 0x000f5f58,
+       0x02cc6c78, 0x02cc0c28, 0xfeeefeee, 0xfeeefeee,
+       0xfeeefeee, 0xfeeefeee, 0xfeeefeee, 0xfeeefeee,
+       0xfeeefeee, 0xfeeefeee, 0xfeeefeee, 0xfeeefeee,
+       0xfeeefeee, 0xfeeefeee, 0xfeeefeee, 0xfeeefeee,
+       0xfeeefeee, 0xfeeefeee, 0xfeeefeee, 0xfeeefeee,
+       0xfeeefeee, 0xfeeefeee, 0xfeeefeee, 0xfeeefeee,
+       0xfeeefeee, 0xfeeefeee, 0xfeeefeee, 0xfeeefeee,
+       0xfeeefeee, 0xfeeefeee, 0xfeeefeee, 0xfeeefeee,
+       0xfeeefeee, 0xfeeefeee, 0xfeeefeee, 0xfeeefeee,
+       0xfeeefeee, 0xfeeefeee, 0xfeeefeee, 0xfeeefeee,
+       0xfeeefeee, 0xfeeefeee, 0xfeeefeee, 0xfeeefeee,
+};
+
+#define V_COEF_SIZE ARRAY_SIZE(verkernel)
+
+/*
+ * RGB 709->2020 conversion parameters
+ */
+static const u16 RGB2RGB[RGB_TO_RGB_TABLE_SIZE] = {
+       10279,  5395,   709,
+       1132,   15065,  187,
+       269,    1442,   14674
+};
+
+/*
+ * YUV601 to RGB conversion parameters
+ * YUV2RGB[0]  - [8] : C0 - C8;
+ * YUV2RGB[9]  - [11]: D0 - D2;
+ * YUV2RGB[12] - [13]: Y clamp min & max calue;
+ * YUV2RGB[14] - [15]: UV clamp min & max calue;
+ */
+static const s32 YUV601_2RGB[YUV_TO_RGB_TABLE_SIZE] = {
+       1196,   0,              1640,   1196,
+       -404,   -836,           1196,   2076,
+       0,      -916224,        558336, -1202944,
+       64,     940,            64,     960
+};
+
+/*
+ * YUV709 to RGB conversion parameters
+ * YUV2RGB[0]  - [8] : C0 - C8;
+ * YUV2RGB[9]  - [11]: D0 - D2;
+ * YUV2RGB[12] - [13]: Y clamp min & max calue;
+ * YUV2RGB[14] - [15]: UV clamp min & max calue;
+ */
+static s32 YUV709_2RGB[YUV_TO_RGB_TABLE_SIZE] = {
+       1196,           0,              1844,   1196,
+       -220,           -548,   1196,   2172,
+       0,                      -1020672, 316672,  -1188608,
+       64,                     940,            64,             960
+};
+
+/*
+ * YUV2020 to RGB conversion parameters
+ * YUV2RGB[0]  - [8] : C0 - C8;
+ * YUV2RGB[9]  - [11]: D0 - D2;
+ * YUV2RGB[12] - [13]: Y clamp min & max calue;
+ * YUV2RGB[14] - [15]: UV clamp min & max calue;
+ */
+static s32 YUV2020_2RGB[YUV_TO_RGB_TABLE_SIZE] = {
+       1196, 0, 1724, 1196,
+       -192, -668, 1196, 2200,
+       0, -959232, 363776, -1202944,
+       64, 940, 64, 960
+};
+
+/*
+ * RGB to YUV2020 conversion parameters
+ * RGB2YUV[0] - [8] : C0 - C8;
+ * RGB2YUV[9] - [11]: D0 - D2;
+ */
+static s16 RGB2YUV[RGB_TO_YUV_TABLE_SIZE] = {
+       230,    594,    52,
+       -125,  -323,    448,
+       448,   -412,   -36,
+       64,             512,    512
+};
+
+/* one is for primary plane and the other is for all overlay planes */
+static const struct dc_hw_plane_reg dc_plane_reg[] = {
+       {
+               .y_address              = DC_FRAMEBUFFER_ADDRESS,
+               .u_address              = DC_FRAMEBUFFER_U_ADDRESS,
+               .v_address              = DC_FRAMEBUFFER_V_ADDRESS,
+               .y_stride               = DC_FRAMEBUFFER_STRIDE,
+               .u_stride               = DC_FRAMEBUFFER_U_STRIDE,
+               .v_stride               = DC_FRAMEBUFFER_V_STRIDE,
+               .size                   = DC_FRAMEBUFFER_SIZE,
+               .top_left               = DC_FRAMEBUFFER_TOP_LEFT,
+               .bottom_right   = DC_FRAMEBUFFER_BOTTOM_RIGHT,
+               .scale_factor_x                 = DC_FRAMEBUFFER_SCALE_FACTOR_X,
+               .scale_factor_y                 = DC_FRAMEBUFFER_SCALE_FACTOR_Y,
+               .h_filter_coef_index    = DC_FRAMEBUFFER_H_FILTER_COEF_INDEX,
+               .h_filter_coef_data             = DC_FRAMEBUFFER_H_FILTER_COEF_DATA,
+               .v_filter_coef_index    = DC_FRAMEBUFFER_V_FILTER_COEF_INDEX,
+               .v_filter_coef_data             = DC_FRAMEBUFFER_V_FILTER_COEF_DATA,
+               .init_offset                    = DC_FRAMEBUFFER_INIT_OFFSET,
+               .color_key                              = DC_FRAMEBUFFER_COLOR_KEY,
+               .color_key_high                 = DC_FRAMEBUFFER_COLOR_KEY_HIGH,
+               .clear_value                    = DC_FRAMEBUFFER_CLEAR_VALUE,
+               .color_table_index              = DC_FRAMEBUFFER_COLOR_TABLE_INDEX,
+               .color_table_data               = DC_FRAMEBUFFER_COLOR_TABLE_DATA,
+               .scale_config                   = DC_FRAMEBUFFER_SCALE_CONFIG,
+               .water_mark                             = DC_FRAMEBUFFER_WATER_MARK,
+               .degamma_index                  = DC_FRAMEBUFFER_DEGAMMA_INDEX,
+               .degamma_data                   = DC_FRAMEBUFFER_DEGAMMA_DATA,
+               .degamma_ex_data                = DC_FRAMEBUFFER_DEGAMMA_EX_DATA,
+               .src_global_color               = DC_FRAMEBUFFER_SRC_GLOBAL_COLOR,
+               .dst_global_color               = DC_FRAMEBUFFER_DST_GLOBAL_COLOR,
+               .blend_config                   = DC_FRAMEBUFFER_BLEND_CONFIG,
+               .roi_origin                             = DC_FRAMEBUFFER_ROI_ORIGIN,
+               .roi_size                               = DC_FRAMEBUFFER_ROI_SIZE,
+               .yuv_to_rgb_coef0                       = DC_FRAMEBUFFER_YUVTORGB_COEF0,
+               .yuv_to_rgb_coef1                       = DC_FRAMEBUFFER_YUVTORGB_COEF1,
+               .yuv_to_rgb_coef2                       = DC_FRAMEBUFFER_YUVTORGB_COEF2,
+               .yuv_to_rgb_coef3                       = DC_FRAMEBUFFER_YUVTORGB_COEF3,
+               .yuv_to_rgb_coef4                       = DC_FRAMEBUFFER_YUVTORGB_COEF4,
+               .yuv_to_rgb_coefd0                      = DC_FRAMEBUFFER_YUVTORGB_COEFD0,
+               .yuv_to_rgb_coefd1                      = DC_FRAMEBUFFER_YUVTORGB_COEFD1,
+               .yuv_to_rgb_coefd2                      = DC_FRAMEBUFFER_YUVTORGB_COEFD2,
+               .y_clamp_bound                          = DC_FRAMEBUFFER_Y_CLAMP_BOUND,
+               .uv_clamp_bound                         = DC_FRAMEBUFFER_UV_CLAMP_BOUND,
+               .rgb_to_rgb_coef0                       = DC_FRAMEBUFFER_RGBTORGB_COEF0,
+               .rgb_to_rgb_coef1                       = DC_FRAMEBUFFER_RGBTORGB_COEF1,
+               .rgb_to_rgb_coef2                       = DC_FRAMEBUFFER_RGBTORGB_COEF2,
+               .rgb_to_rgb_coef3                       = DC_FRAMEBUFFER_RGBTORGB_COEF3,
+               .rgb_to_rgb_coef4                       = DC_FRAMEBUFFER_RGBTORGB_COEF4,
+       },
+       {
+               .y_address              = DC_OVERLAY_ADDRESS,
+               .u_address              = DC_OVERLAY_U_ADDRESS,
+               .v_address              = DC_OVERLAY_V_ADDRESS,
+               .y_stride               = DC_OVERLAY_STRIDE,
+               .u_stride               = DC_OVERLAY_U_STRIDE,
+               .v_stride               = DC_OVERLAY_V_STRIDE,
+               .size                   = DC_OVERLAY_SIZE,
+               .top_left               = DC_OVERLAY_TOP_LEFT,
+               .bottom_right   = DC_OVERLAY_BOTTOM_RIGHT,
+               .scale_factor_x = DC_OVERLAY_SCALE_FACTOR_X,
+               .scale_factor_y = DC_OVERLAY_SCALE_FACTOR_Y,
+               .h_filter_coef_index = DC_OVERLAY_H_FILTER_COEF_INDEX,
+               .h_filter_coef_data  = DC_OVERLAY_H_FILTER_COEF_DATA,
+               .v_filter_coef_index = DC_OVERLAY_V_FILTER_COEF_INDEX,
+               .v_filter_coef_data  = DC_OVERLAY_V_FILTER_COEF_DATA,
+               .init_offset             = DC_OVERLAY_INIT_OFFSET,
+               .color_key                       = DC_OVERLAY_COLOR_KEY,
+               .color_key_high                 = DC_OVERLAY_COLOR_KEY_HIGH,
+               .clear_value             = DC_OVERLAY_CLEAR_VALUE,
+               .color_table_index       = DC_OVERLAY_COLOR_TABLE_INDEX,
+               .color_table_data        = DC_OVERLAY_COLOR_TABLE_DATA,
+               .scale_config            = DC_OVERLAY_SCALE_CONFIG,
+               .water_mark                             = DC_OVERLAY_WATER_MARK,
+               .degamma_index           = DC_OVERLAY_DEGAMMA_INDEX,
+               .degamma_data            = DC_OVERLAY_DEGAMMA_DATA,
+               .degamma_ex_data         = DC_OVERLAY_DEGAMMA_EX_DATA,
+               .src_global_color        = DC_OVERLAY_SRC_GLOBAL_COLOR,
+               .dst_global_color        = DC_OVERLAY_DST_GLOBAL_COLOR,
+               .blend_config            = DC_OVERLAY_BLEND_CONFIG,
+               .roi_origin                             = DC_OVERLAY_ROI_ORIGIN,
+               .roi_size                               = DC_OVERLAY_ROI_SIZE,
+               .yuv_to_rgb_coef0                = DC_OVERLAY_YUVTORGB_COEF0,
+               .yuv_to_rgb_coef1                = DC_OVERLAY_YUVTORGB_COEF1,
+               .yuv_to_rgb_coef2                = DC_OVERLAY_YUVTORGB_COEF2,
+               .yuv_to_rgb_coef3                = DC_OVERLAY_YUVTORGB_COEF3,
+               .yuv_to_rgb_coef4                       = DC_OVERLAY_YUVTORGB_COEF4,
+               .yuv_to_rgb_coefd0                      = DC_OVERLAY_YUVTORGB_COEFD0,
+               .yuv_to_rgb_coefd1                      = DC_OVERLAY_YUVTORGB_COEFD1,
+               .yuv_to_rgb_coefd2                      = DC_OVERLAY_YUVTORGB_COEFD2,
+               .y_clamp_bound           = DC_OVERLAY_Y_CLAMP_BOUND,
+               .uv_clamp_bound          = DC_OVERLAY_UV_CLAMP_BOUND,
+               .rgb_to_rgb_coef0                = DC_OVERLAY_RGBTORGB_COEF0,
+               .rgb_to_rgb_coef1                = DC_OVERLAY_RGBTORGB_COEF1,
+               .rgb_to_rgb_coef2                = DC_OVERLAY_RGBTORGB_COEF2,
+               .rgb_to_rgb_coef3                = DC_OVERLAY_RGBTORGB_COEF3,
+               .rgb_to_rgb_coef4                = DC_OVERLAY_RGBTORGB_COEF4,
+       },
+};
+
+static const struct dc_hw_funcs hw_func;
+
+static inline u32 hi_read(struct dc_hw *hw, u32 reg)
+{
+       return readl(hw->hi_base + reg);
+}
+
+static inline void hi_write(struct dc_hw *hw, u32 reg, u32 value)
+{
+       writel(value, hw->hi_base + reg);
+}
+
+static inline void dc_write(struct dc_hw *hw, u32 reg, u32 value)
+{
+       writel(value, hw->reg_base + reg - DC_REG_BASE);
+}
+
+static inline u32 dc_read(struct dc_hw *hw, u32 reg)
+{
+       u32 value = readl(hw->reg_base + reg - DC_REG_BASE);
+
+       return value;
+}
+
+static inline void dc_set_clear(struct dc_hw *hw, u32 reg, u32 set, u32 clear)
+{
+       u32 value = dc_read(hw, reg);
+
+       value &= ~clear;
+       value |= set;
+       dc_write(hw, reg, value);
+}
+
+static void load_default_filter(struct dc_hw *hw,
+                               const struct dc_hw_plane_reg *reg, u32 offset)
+{
+       u8 i;
+
+       dc_write(hw, reg->scale_config + offset, 0x33);
+       dc_write(hw, reg->init_offset + offset, 0x80008000);
+       dc_write(hw, reg->h_filter_coef_index + offset, 0x00);
+       for (i = 0; i < H_COEF_SIZE; i++)
+               dc_write(hw, reg->h_filter_coef_data + offset, horkernel[i]);
+
+       dc_write(hw, reg->v_filter_coef_index + offset, 0x00);
+       for (i = 0; i < V_COEF_SIZE; i++)
+               dc_write(hw, reg->v_filter_coef_data + offset, verkernel[i]);
+}
+
+static void load_rgb_to_rgb(struct dc_hw *hw, const struct dc_hw_plane_reg *reg,
+                           u32 offset, const u16 *table)
+{
+       dc_write(hw, reg->rgb_to_rgb_coef0 + offset, table[0] | (table[1] << 16));
+       dc_write(hw, reg->rgb_to_rgb_coef1 + offset, table[2] | (table[3] << 16));
+       dc_write(hw, reg->rgb_to_rgb_coef2 + offset, table[4] | (table[5] << 16));
+       dc_write(hw, reg->rgb_to_rgb_coef3 + offset, table[6] | (table[7] << 16));
+       dc_write(hw, reg->rgb_to_rgb_coef4 + offset, table[8]);
+}
+
+static void load_yuv_to_rgb(struct dc_hw *hw, const struct dc_hw_plane_reg *reg,
+                           u32 offset, const s32 *table)
+{
+       dc_write(hw, reg->yuv_to_rgb_coef0 + offset,
+                (0xFFFF & table[0]) | (table[1] << 16));
+       dc_write(hw, reg->yuv_to_rgb_coef1 + offset,
+                (0xFFFF & table[2]) | (table[3] << 16));
+       dc_write(hw, reg->yuv_to_rgb_coef2 + offset,
+                (0xFFFF & table[4]) | (table[5] << 16));
+       dc_write(hw, reg->yuv_to_rgb_coef3 + offset,
+                (0xFFFF & table[6]) | (table[7] << 16));
+       dc_write(hw, reg->yuv_to_rgb_coef4 + offset, table[8]);
+       dc_write(hw, reg->yuv_to_rgb_coefd0 + offset, table[9]);
+       dc_write(hw, reg->yuv_to_rgb_coefd1 + offset, table[10]);
+       dc_write(hw, reg->yuv_to_rgb_coefd2 + offset, table[11]);
+       dc_write(hw, reg->y_clamp_bound + offset, table[12] | (table[13] << 16));
+       dc_write(hw, reg->uv_clamp_bound + offset, table[14] | (table[15] << 16));
+}
+
+static void load_rgb_to_yuv(struct dc_hw *hw, u32 offset, s16 *table)
+{
+       dc_write(hw, DC_DISPLAY_RGBTOYUV_COEF0 + offset,
+                table[0] | (table[1] << 16));
+       dc_write(hw, DC_DISPLAY_RGBTOYUV_COEF1 + offset,
+                table[2] | (table[3] << 16));
+       dc_write(hw, DC_DISPLAY_RGBTOYUV_COEF2 + offset,

drivers/gpu/drm/verisilicon/vs_dc_hw.c line 347

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.c new file +10 -0
+                table[4] | (table[5] << 16));
+       dc_write(hw, DC_DISPLAY_RGBTOYUV_COEF3 + offset,
+                table[6] | (table[7] << 16));
+       dc_write(hw, DC_DISPLAY_RGBTOYUV_COEF4 + offset, table[8]);
+       dc_write(hw, DC_DISPLAY_RGBTOYUV_COEFD0 + offset, table[9]);
+       dc_write(hw, DC_DISPLAY_RGBTOYUV_COEFD1 + offset, table[10]);
+       dc_write(hw, DC_DISPLAY_RGBTOYUV_COEFD2 + offset, table[11]);
+}
+
+static bool is_rgb(enum dc_hw_color_format format)

Can you use drm_format_info.is_yuv instead of manually coding it here?

Quoted 26 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.c new file +26 -0
+{
+       switch (format) {
+       case FORMAT_X4R4G4B4:
+       case FORMAT_A4R4G4B4:
+       case FORMAT_X1R5G5B5:
+       case FORMAT_A1R5G5B5:
+       case FORMAT_R5G6B5:
+       case FORMAT_X8R8G8B8:
+       case FORMAT_A8R8G8B8:
+       case FORMAT_A2R10G10B10:
+               return true;
+       default:
+               return false;
+       }
+}
+
+static u32 get_addr_offset(u32 id)
+{
+       u32 offset = 0;
+
+       switch (id) {
+       case PRIMARY_PLANE_1:
+       case OVERLAY_PLANE_1:
+               offset = 0x04;
+               break;
+       case OVERLAY_PLANE_2:

drivers/gpu/drm/verisilicon/vs_dc_hw.c line 383

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.c new file +10 -0
+               offset = 0x08;
+               break;
+       case OVERLAY_PLANE_3:
+               offset = 0x0C;
+               break;
+       default:
+               break;
+       }
+
+       return offset;

Wouldn't it be better to store this value in the plane instance?

drivers/gpu/drm/verisilicon/vs_type.h

Quoted 1,640 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.c new file +639 -0
+}
+
+int dc_hw_init(struct dc_hw *hw)
+{
+       u8 i, id, panel_num, layer_num;
+       u32 offset;
+
+       hw->func = (struct dc_hw_funcs *)&hw_func;
+
+       layer_num = hw->info->layer_num;
+       for (i = 0; i < layer_num; i++) {
+               id = hw->info->planes[i].id;
+               offset = get_addr_offset(id);
+               if (id == PRIMARY_PLANE_0 || id == PRIMARY_PLANE_1)
+                       hw->reg[i] = dc_plane_reg[0];
+               else
+                       hw->reg[i] = dc_plane_reg[1];
+
+               load_default_filter(hw, &hw->reg[i], offset);
+               load_rgb_to_rgb(hw, &hw->reg[i], offset, RGB2RGB);
+       }
+
+       panel_num = hw->info->panel_num;
+       for (i = 0; i < panel_num; i++) {
+               offset = i << 2;
+
+               load_rgb_to_yuv(hw, offset, RGB2YUV);
+               dc_write(hw, DC_DISPLAY_PANEL_CONFIG + offset, 0x111);
+
+               offset = i ? DC_CURSOR_OFFSET : 0;
+               dc_write(hw, DC_CURSOR_BACKGROUND + offset, 0x00FFFFFF);
+               dc_write(hw, DC_CURSOR_FOREGROUND + offset, 0x00AAAAAA);
+       }
+
+       return 0;
+}
+
+void dc_hw_deinit(struct dc_hw *hw)
+{
+       /* Nothing to do */
+}
+
+void dc_hw_update_plane(struct dc_hw *hw, u8 id,
+                       struct dc_hw_fb *fb, struct dc_hw_scale *scale,
+                       struct dc_hw_position *pos, struct dc_hw_blend *blend)
+{
+       struct dc_hw_plane *plane = &hw->plane[id];
+
+       if (plane) {
+               if (fb) {
+                       if (!fb->enable)
+                               plane->fb.enable = false;
+                       else
+                               memcpy(&plane->fb, fb,
+                                      sizeof(*fb) - sizeof(fb->dirty));
+                       plane->fb.dirty = true;
+               }
+               if (scale) {
+                       memcpy(&plane->scale, scale,
+                              sizeof(*scale) - sizeof(scale->dirty));
+                       plane->scale.dirty = true;
+               }
+               if (pos) {
+                       memcpy(&plane->pos, pos,
+                              sizeof(*pos) - sizeof(pos->dirty));
+                       plane->pos.dirty = true;
+               }
+               if (blend) {
+                       memcpy(&plane->blend, blend,
+                              sizeof(*blend) - sizeof(blend->dirty));
+                       plane->blend.dirty = true;
+               }
+       }
+}
+
+void dc_hw_update_cursor(struct dc_hw *hw, u8 id, struct dc_hw_cursor *cursor)
+{
+       memcpy(&hw->cursor[id], cursor, sizeof(*cursor) - sizeof(cursor->dirty));
+       hw->cursor[id].dirty = true;
+}
+
+void dc_hw_update_gamma(struct dc_hw *hw, u8 id, u16 index,
+                       u16 r, u16 g, u16 b)
+{
+       if (index >= hw->info->gamma_size)
+               return;
+
+       hw->gamma[id].gamma[index][0] = r;
+       hw->gamma[id].gamma[index][1] = g;
+       hw->gamma[id].gamma[index][2] = b;
+       hw->gamma[id].dirty = true;
+}
+
+void dc_hw_enable_gamma(struct dc_hw *hw, u8 id, bool enable)
+{
+       hw->gamma[id].enable = enable;
+       hw->gamma[id].dirty = true;
+}
+
+void dc_hw_setup_display(struct dc_hw *hw, struct dc_hw_display *display)
+{
+       u8 id = display->id;
+
+       memcpy(&hw->display[id], display, sizeof(*display));
+
+       hw->func->display(hw, display);
+}
+
+void dc_hw_enable_interrupt(struct dc_hw *hw, bool enable)
+{
+       if (enable)
+               hi_write(hw, AQ_INTR_ENBL, 0xFFFFFFFF);
+       else
+               hi_write(hw, AQ_INTR_ENBL, 0);
+}
+
+u32 dc_hw_get_interrupt(struct dc_hw *hw)
+{
+       return hi_read(hw, AQ_INTR_ACKNOWLEDGE);
+}
+
+void dc_hw_enable_shadow_register(struct dc_hw *hw, bool enable)
+{
+       u32 i, offset;
+       u8 id, layer_num = hw->info->layer_num;
+       u8 panel_num = hw->info->panel_num;
+
+       for (i = 0; i < layer_num; i++) {
+               id = hw->info->planes[i].id;
+               offset = get_addr_offset(id);
+               if (enable) {
+                       if (id == PRIMARY_PLANE_0 || id == PRIMARY_PLANE_1)
+                               dc_set_clear(hw, DC_FRAMEBUFFER_CONFIG_EX + offset,
+                                            PRIMARY_SHADOW_EN, 0);
+                       else
+                               dc_set_clear(hw, DC_OVERLAY_CONFIG + offset,
+                                            OVERLAY_SHADOW_EN, 0);
+               } else {
+                       if (id == PRIMARY_PLANE_0 || id == PRIMARY_PLANE_1)
+                               dc_set_clear(hw, DC_FRAMEBUFFER_CONFIG_EX + offset,
+                                            0, PRIMARY_SHADOW_EN);
+                       else
+                               dc_set_clear(hw, DC_OVERLAY_CONFIG + offset,
+                                            0, OVERLAY_SHADOW_EN);
+               }
+       }
+
+       for (i = 0; i < panel_num; i++) {
+               offset = i << 2;
+               if (enable)
+                       dc_set_clear(hw, DC_DISPLAY_PANEL_CONFIG_EX + offset, 0, PANEL_SHADOW_EN);
+               else
+                       dc_set_clear(hw, DC_DISPLAY_PANEL_CONFIG_EX + offset, PANEL_SHADOW_EN, 0);
+       }
+}
+
+void dc_hw_set_out(struct dc_hw *hw, enum dc_hw_out out, u8 id)
+{
+       if (out <= OUT_DP)
+               hw->out[id] = out;
+}
+
+static void gamma_ex_commit(struct dc_hw *hw)
+{
+       u8 panel_num = hw->info->panel_num;
+       u16 i, j;
+       u32 value;
+
+       for (j = 0; j < panel_num; j++) {
+               if (hw->gamma[j].dirty) {
+                       if (hw->gamma[j].enable) {
+                               dc_write(hw, DC_DISPLAY_GAMMA_EX_INDEX + (j << 2), 0x00);
+                               for (i = 0; i < GAMMA_EX_SIZE; i++) {
+                                       value = hw->gamma[j].gamma[i][2] |
+                                               (hw->gamma[j].gamma[i][1] << 12);
+                                       dc_write(hw, DC_DISPLAY_GAMMA_EX_DATA + (j << 2), value);
+                                       dc_write(hw, DC_DISPLAY_GAMMA_EX_ONE_DATA + (j << 2),
+                                                hw->gamma[j].gamma[i][0]);
+                               }
+                               dc_set_clear(hw, DC_DISPLAY_PANEL_CONFIG + (j << 2),
+                                            PANEL_GAMMA_EN, 0);
+                       } else {
+                               dc_set_clear(hw, DC_DISPLAY_PANEL_CONFIG + (j << 2),
+                                            0, PANEL_GAMMA_EN);
+                       }
+                       hw->gamma[j].dirty = false;
+               }
+       }
+}
+
+static void plane_ex_commit_primary(struct dc_hw *hw, struct dc_hw_plane *plane, u32 i, u32 offset)
+{
+       if (plane->fb.dirty) {
+               if (is_rgb(plane->fb.format)) {
+                       dc_set_clear(hw,
+                                    DC_FRAMEBUFFER_CONFIG_EX + offset,
+                                    PRIMARY_RGB2RGB_EN, PRIMARY_YUVCLAMP_EN);
+               } else {
+                       dc_set_clear(hw,
+                                    DC_FRAMEBUFFER_CONFIG_EX + offset,
+                                    PRIMARY_YUVCLAMP_EN, PRIMARY_RGB2RGB_EN);
+
+                       switch (plane->fb.yuv_color_space) {
+                       case COLOR_SPACE_601:
+                               load_yuv_to_rgb(hw, &hw->reg[i], offset, YUV601_2RGB);
+                               break;
+                       case COLOR_SPACE_709:
+                               load_yuv_to_rgb(hw, &hw->reg[i], offset, YUV709_2RGB);
+                               break;
+                       case COLOR_SPACE_2020:
+                               load_yuv_to_rgb(hw, &hw->reg[i], offset, YUV2020_2RGB);
+                               break;
+                       default:
+                               break;
+                       }
+               }
+
+               if (plane->fb.enable) {
+                       dc_write(hw, hw->reg[i].y_address + offset,
+                                plane->fb.y_address);
+                       dc_write(hw, hw->reg[i].u_address + offset,
+                                plane->fb.u_address);
+                       dc_write(hw, hw->reg[i].v_address + offset,
+                                plane->fb.v_address);
+                       dc_write(hw, hw->reg[i].y_stride + offset,
+                                plane->fb.y_stride);
+                       dc_write(hw, hw->reg[i].u_stride + offset,
+                                plane->fb.u_stride);
+                       dc_write(hw, hw->reg[i].v_stride + offset,
+                                plane->fb.v_stride);
+                       dc_write(hw, hw->reg[i].size + offset,
+                                FB_SIZE(plane->fb.width, plane->fb.height));
+                       dc_write(hw, hw->reg[i].water_mark + offset,
+                                plane->fb.water_mark);
+
+                       if (plane->fb.clear_enable)
+                               dc_write(hw, hw->reg[i].clear_value + offset,
+                                        plane->fb.clear_value);
+               }
+
+               dc_set_clear(hw, DC_FRAMEBUFFER_CONFIG + offset,
+                            PRIMARY_FORMAT(plane->fb.format) |
+                            PRIMARY_UV_SWIZ(plane->fb.uv_swizzle) |
+                            PRIMARY_SWIZ(plane->fb.swizzle) |
+                            PRIMARY_TILE(plane->fb.tile_mode) |
+                            PRIMARY_YUV_COLOR(plane->fb.yuv_color_space) |
+                            PRIMARY_ROTATION(plane->fb.rotation) |
+                            PRIMARY_CLEAR_EN(plane->fb.clear_enable),
+                            PRIMARY_FORMAT_MASK |
+                            PRIMARY_UV_SWIZ_MASK |
+                            PRIMARY_SWIZ_MASK |
+                            PRIMARY_TILE_MASK |
+                            PRIMARY_YUV_COLOR_MASK |
+                            PRIMARY_ROTATION_MASK |
+                            PRIMARY_CLEAR_EN_MASK);
+               dc_set_clear(hw, DC_FRAMEBUFFER_CONFIG_EX + offset,
+                            PRIMARY_DECODER_EN(plane->fb.dec_enable) |
+                            PRIMARY_EN(plane->fb.enable) |
+                            PRIMARY_ZPOS(plane->fb.zpos) |
+                            PRIMARY_CHANNEL(plane->fb.display_id),
+                            PRIMARY_DECODER_EN_EN_MASK |
+                            PRIMARY_EN_MASK |
+                            PRIMARY_ZPOS_MASK |
+                            PRIMARY_CHANNEL_MASK);
+
+               plane->fb.dirty = false;
+       }
+
+       if (plane->scale.dirty) {
+               if (plane->scale.enable) {
+                       dc_write(hw, hw->reg[i].scale_factor_x + offset,
+                                plane->scale.scale_factor_x);
+                       dc_write(hw, hw->reg[i].scale_factor_y + offset,
+                                plane->scale.scale_factor_y);
+                               dc_set_clear(hw, DC_FRAMEBUFFER_CONFIG + offset,
+                                            PRIMARY_SCALE_EN, 0);
+               } else {
+                       dc_set_clear(hw, DC_FRAMEBUFFER_CONFIG + offset,
+                                    0, PRIMARY_SCALE_EN);
+               }
+               plane->scale.dirty = false;
+       }
+
+       if (plane->pos.dirty) {
+               dc_write(hw, hw->reg[i].top_left + offset,
+                        X_POS(plane->pos.start_x) |
+                        Y_POS(plane->pos.start_y));
+               dc_write(hw, hw->reg[i].bottom_right + offset,
+                        X_POS(plane->pos.end_x) |
+                        Y_POS(plane->pos.end_y));
+               plane->pos.dirty = false;
+       }
+
+       if (plane->blend.dirty) {
+               dc_write(hw, hw->reg[i].src_global_color + offset,
+                        PRIMARY_ALPHA_LEN(plane->blend.alpha));
+               dc_write(hw, hw->reg[i].dst_global_color + offset,
+                        PRIMARY_ALPHA_LEN(plane->blend.alpha));
+               switch (plane->blend.blend_mode) {
+               case DRM_MODE_BLEND_PREMULTI:
+                       dc_write(hw, hw->reg[i].blend_config + offset, BLEND_PREMULTI);
+                       break;
+               case DRM_MODE_BLEND_COVERAGE:
+                       dc_write(hw, hw->reg[i].blend_config + offset, BLEND_COVERAGE);
+                       break;
+               case DRM_MODE_BLEND_PIXEL_NONE:
+                       dc_write(hw, hw->reg[i].blend_config + offset, BLEND_PIXEL_NONE);
+                       break;
+               default:
+                       break;
+               }
+               plane->blend.dirty = false;
+       }
+}
+
+static void plane_ex_commit_overlay(struct dc_hw *hw, struct dc_hw_plane *plane,
+                                   u32 i, u32 offset)
+{
+       if (plane->fb.dirty) {
+               if (is_rgb(plane->fb.format)) {
+                       dc_set_clear(hw, DC_OVERLAY_CONFIG + offset,
+                                    OVERLAY_RGB2RGB_EN, OVERLAY_CLAMP_EN);
+               } else {
+                       dc_set_clear(hw, DC_OVERLAY_CONFIG + offset,
+                                    OVERLAY_CLAMP_EN, OVERLAY_RGB2RGB_EN);
+
+                       switch (plane->fb.yuv_color_space) {
+                       case COLOR_SPACE_601:
+                               load_yuv_to_rgb(hw, &hw->reg[i], offset, YUV601_2RGB);
+                               break;
+                       case COLOR_SPACE_709:
+                               load_yuv_to_rgb(hw, &hw->reg[i], offset, YUV709_2RGB);
+                               break;
+                       case COLOR_SPACE_2020:
+                               load_yuv_to_rgb(hw, &hw->reg[i], offset, YUV2020_2RGB);
+                               break;
+                       default:
+                               break;
+                       }
+               }
+
+               if (plane->fb.enable) {
+                       dc_write(hw, hw->reg[i].y_address + offset,
+                                plane->fb.y_address);
+                       dc_write(hw, hw->reg[i].u_address + offset,
+                                plane->fb.u_address);
+                       dc_write(hw, hw->reg[i].v_address + offset,
+                                plane->fb.v_address);
+                       dc_write(hw, hw->reg[i].y_stride + offset,
+                                plane->fb.y_stride);
+                       dc_write(hw, hw->reg[i].u_stride + offset,
+                                plane->fb.u_stride);
+                       dc_write(hw, hw->reg[i].v_stride + offset,
+                                plane->fb.v_stride);
+                       dc_write(hw, hw->reg[i].size + offset,
+                                FB_SIZE(plane->fb.width, plane->fb.height));
+                       dc_write(hw, hw->reg[i].water_mark + offset,
+                                plane->fb.water_mark);
+
+                       if (plane->fb.clear_enable)
+                               dc_write(hw, hw->reg[i].clear_value + offset,
+                                        plane->fb.clear_value);
+               }
+
+               dc_set_clear(hw, DC_OVERLAY_CONFIG + offset,
+                            OVERLAY_DEC_EN(plane->fb.dec_enable) |
+                            OVERLAY_CLEAR_EN(plane->fb.clear_enable) |
+                            OVERLAY_FB_EN(plane->fb.enable) |
+                            OVERLAY_FORMAT(plane->fb.format) |
+                            OVERLAY_UV_SWIZ(plane->fb.uv_swizzle) |
+                            OVERLAY_SWIZ(plane->fb.swizzle) |
+                            OVERLAY_TILE(plane->fb.tile_mode) |
+                            OVERLAY_YUV_COLOR(plane->fb.yuv_color_space) |
+                            OVERLAY_ROTATION(plane->fb.rotation),
+                            OVERLAY_DEC_EN_MASK |
+                            OVERLAY_CLEAR_EN_MASK |
+                            OVERLAY_FB_EN_MASK |
+                            OVERLAY_FORMAT_MASK |
+                            OVERLAY_UV_SWIZ_MASK |
+                            OVERLAY_SWIZ_MASK |
+                            OVERLAY_TILE_MASK |
+                            OVERLAY_YUV_COLOR_MASK |
+                            OVERLAY_ROTATION_MASK);
+
+               dc_set_clear(hw, DC_OVERLAY_CONFIG_EX + offset,
+                            OVERLAY_LAYER_SEL(plane->fb.zpos) |
+                            OVERLAY_PANEL_SEL(plane->fb.display_id),
+                            OVERLAY_LAYER_SEL_MASK |
+                            OVERLAY_PANEL_SEL_MASK);
+
+               plane->fb.dirty = false;
+       }
+
+       if (plane->scale.dirty) {
+               if (plane->scale.enable) {
+                       dc_write(hw, hw->reg[i].scale_factor_x + offset,
+                                plane->scale.scale_factor_x);
+                       dc_write(hw, hw->reg[i].scale_factor_y + offset,
+                                plane->scale.scale_factor_y);
+                       dc_set_clear(hw, DC_OVERLAY_SCALE_CONFIG + offset,
+                                    OVERLAY_SCALE_EN, 0);
+               } else {
+                       dc_set_clear(hw, DC_OVERLAY_SCALE_CONFIG + offset,
+                                    0, OVERLAY_SCALE_EN);
+               }
+               plane->scale.dirty = false;
+       }
+
+       if (plane->pos.dirty) {
+               dc_write(hw, hw->reg[i].top_left + offset,
+                        X_POS(plane->pos.start_x) |
+                        Y_POS(plane->pos.start_y));
+               dc_write(hw, hw->reg[i].bottom_right + offset,
+                        X_POS(plane->pos.end_x) |
+                        Y_POS(plane->pos.end_y));
+               plane->pos.dirty = false;
+       }
+
+       if (plane->blend.dirty) {
+               dc_write(hw, hw->reg[i].src_global_color + offset,
+                        OVERLAY_ALPHA_LEN(plane->blend.alpha));
+               dc_write(hw, hw->reg[i].dst_global_color + offset,
+                        OVERLAY_ALPHA_LEN(plane->blend.alpha));
+               switch (plane->blend.blend_mode) {
+               case DRM_MODE_BLEND_PREMULTI:
+                       dc_write(hw, hw->reg[i].blend_config + offset, BLEND_PREMULTI);
+                       break;
+               case DRM_MODE_BLEND_COVERAGE:
+                       dc_write(hw, hw->reg[i].blend_config + offset, BLEND_COVERAGE);
+                       break;
+               case DRM_MODE_BLEND_PIXEL_NONE:
+                       dc_write(hw, hw->reg[i].blend_config + offset, BLEND_PIXEL_NONE);
+                       break;
+               default:
+                       break;
+               }
+               plane->blend.dirty = false;
+       }
+}
+
+static void plane_ex_commit(struct dc_hw *hw)
+{
+       struct dc_hw_plane *plane;
+       u8 id, layer_num = hw->info->layer_num;
+       u32 i, offset;
+
+       for (i = 0; i < layer_num; i++) {
+               plane = &hw->plane[i];
+               id = hw->info->planes[i].id;
+               offset = get_addr_offset(id);
+               if (id == PRIMARY_PLANE_0 || id == PRIMARY_PLANE_1)
+                       plane_ex_commit_primary(hw, plane, i, offset);
+               else
+                       plane_ex_commit_overlay(hw, plane, i, offset);
+       }
+}
+
+static void setup_display(struct dc_hw *hw, struct dc_hw_display *display)
+{
+       u8 id = display->id;
+       u32 dpi_cfg, offset = id << 2;
+
+       if (hw->display[id].enable) {
+               switch (display->bus_format) {
+               case MEDIA_BUS_FMT_RGB565_1X16:
+                       dpi_cfg = 0;
+                       break;
+               case MEDIA_BUS_FMT_RGB666_1X18:
+                       dpi_cfg = 3;
+                       break;
+               case MEDIA_BUS_FMT_RGB666_1X24_CPADHI:
+                       dpi_cfg = 4;
+                       break;
+               case MEDIA_BUS_FMT_RGB888_1X24:
+                       dpi_cfg = 5;
+                       break;
+               case MEDIA_BUS_FMT_RGB101010_1X30:
+                       dpi_cfg = 6;
+                       break;
+               default:
+                       dpi_cfg = 5;
+                       break;
+               }
+               dc_write(hw, DC_DISPLAY_DPI_CONFIG + offset, dpi_cfg);
+
+               if (id == 0)
+                       dc_set_clear(hw, DC_DISPLAY_PANEL_START, 0, PANEL0_EN | TWO_PANEL_EN);
+               else
+                       dc_set_clear(hw, DC_DISPLAY_PANEL_START, 0, PANEL1_EN | TWO_PANEL_EN);
+
+               dc_write(hw, DC_DISPLAY_H + offset,
+                        H_ACTIVE_LEN(hw->display[id].h_active) |
+                        H_TOTAL_LEN(hw->display[id].h_total));
+
+               dc_write(hw, DC_DISPLAY_H_SYNC + offset,
+                        H_SYNC_START_LEN(hw->display[id].h_sync_start) |
+                        H_SYNC_END_LEN(hw->display[id].h_sync_end) |
+                        H_POLARITY_LEN(hw->display[id].h_sync_polarity ? 0 : 1) |
+                        H_PLUS_LEN(1));
+
+               dc_write(hw, DC_DISPLAY_V + offset,
+                        V_ACTIVE_LEN(hw->display[id].v_active) |
+                        V_TOTAL_LEN(hw->display[id].v_total));
+
+               dc_write(hw, DC_DISPLAY_V_SYNC + offset,
+                        V_SYNC_START_LEN(hw->display[id].v_sync_start) |
+                        V_SYNC_END_LEN(hw->display[id].v_sync_end) |
+                        V_POLARITY_LEN(hw->display[id].v_sync_polarity ? 0 : 1) |
+                        V_PLUS_LEN(1));
+
+               if (hw->info->pipe_sync)
+                       dc_set_clear(hw, DC_FRAMEBUFFER_CONFIG_EX,
+                                    0, PRIMARY_SYNC0_EN | PRIMARY_SYNC1_EN);
+
+               dc_set_clear(hw, DC_DISPLAY_PANEL_CONFIG + offset, PANEL_OUTPUT_EN, 0);
+               if (id == 0)
+                       dc_set_clear(hw, DC_DISPLAY_PANEL_START, PANEL0_EN, SYNC_EN);
+               else
+                       dc_set_clear(hw, DC_DISPLAY_PANEL_START, PANEL1_EN, SYNC_EN);
+       } else {
+               dc_set_clear(hw, DC_DISPLAY_PANEL_CONFIG + offset, 0, PANEL_OUTPUT_EN);
+
+               if (id == 0)
+                       dc_set_clear(hw, DC_DISPLAY_PANEL_START, 0, PANEL0_EN | TWO_PANEL_EN);
+               else
+                       dc_set_clear(hw, DC_DISPLAY_PANEL_START, 0, PANEL1_EN | TWO_PANEL_EN);
+       }
+}
+
+static void setup_display_ex(struct dc_hw *hw, struct dc_hw_display *display)
+{
+       u8 id = display->id;
+       u32 dp_cfg, offset = id << 2;
+       bool is_yuv = false;
+
+       if (hw->display[id].enable && hw->out[id] == OUT_DP) {
+               switch (display->bus_format) {
+               case MEDIA_BUS_FMT_RGB565_1X16:
+                       dp_cfg = 0;
+                       break;
+               case MEDIA_BUS_FMT_RGB666_1X18:
+                       dp_cfg = 1;
+                       break;
+               case MEDIA_BUS_FMT_RGB888_1X24:
+                       dp_cfg = 2;
+                       break;
+               case MEDIA_BUS_FMT_RGB101010_1X30:
+                       dp_cfg = 3;
+                       break;
+               case MEDIA_BUS_FMT_UYVY8_1X16:
+                       dp_cfg = 2 << 4;
+                       is_yuv = true;
+                       break;
+               case MEDIA_BUS_FMT_YUV8_1X24:
+                       dp_cfg = 4 << 4;
+                       is_yuv = true;
+                       break;
+               case MEDIA_BUS_FMT_UYVY10_1X20:
+                       dp_cfg = 8 << 4;
+                       is_yuv = true;
+                       break;
+               case MEDIA_BUS_FMT_YUV10_1X30:
+                       dp_cfg = 10 << 4;
+                       is_yuv = true;
+                       break;
+               case MEDIA_BUS_FMT_UYYVYY8_0_5X24:
+                       dp_cfg = 12 << 4;
+                       is_yuv = true;
+                       break;
+               case MEDIA_BUS_FMT_UYYVYY10_0_5X30:
+                       dp_cfg = 13 << 4;
+                       is_yuv = true;
+                       break;
+               default:
+                       dp_cfg = 2;
+                       break;
+               }
+               if (is_yuv)
+                       dc_set_clear(hw, DC_DISPLAY_PANEL_CONFIG + offset,
+                                    PANEL_RGB2YUV_EN, 0);
+               else
+                       dc_set_clear(hw, DC_DISPLAY_PANEL_CONFIG + offset,
+                                    0, PANEL_RGB2YUV_EN);
+               dc_write(hw, DC_DISPLAY_DP_CONFIG + offset, dp_cfg | DP_SELECT);
+       }
+
+       if (hw->out[id] == OUT_DPI)
+               dc_set_clear(hw, DC_DISPLAY_DP_CONFIG + offset, 0, DP_SELECT);
+
+       setup_display(hw, display);
+}
+
+static const struct dc_hw_funcs hw_func = {
+       .gamma = &gamma_ex_commit,
+       .plane = &plane_ex_commit,
+       .display = setup_display_ex,
+};
+
+void dc_hw_commit(struct dc_hw *hw)
+{
+       u32 i, offset = 0;
+       u8 plane_num = hw->info->plane_num;
+       u8 layer_num = hw->info->layer_num;
+       u8 cursor_num = plane_num - layer_num;
+
+       hw->func->gamma(hw);
+       hw->func->plane(hw);
+
+       for (i = 0; i < cursor_num; i++) {
+               if (hw->cursor[i].dirty) {
+                       offset = hw->cursor[i].display_id ? DC_CURSOR_OFFSET : 0;
+                       if (hw->cursor[i].enable) {
+                               dc_write(hw, DC_CURSOR_ADDRESS + offset,
+                                        hw->cursor[i].address);
+                               dc_write(hw, DC_CURSOR_LOCATION + offset,
+                                        X_LCOTION(hw->cursor[i].x) |
+                                        Y_LCOTION(hw->cursor[i].y));
+                               dc_set_clear(hw, DC_CURSOR_CONFIG + offset,
+                                            CURSOR_HOT_X(hw->cursor[i].hot_x) |
+                                            CURSOR_HOT_y(hw->cursor[i].hot_y) |
+                                            CURSOR_SIZE(hw->cursor[i].size) |
+                                            CURSOR_VALID(1) |
+                                            CURSOR_TRIG_FETCH(1) |
+                                            CURSOR_FORMAT(CURSOR_FORMAT_A8R8G8B8),
+                                            CURSOR_HOT_X_MASK |
+                                            CURSOR_HOT_y_MASK |
+                                            CURSOR_SIZE_MASK |
+                                            CURSOR_VALID_MASK |
+                                            CURSOR_TRIG_FETCH_MASK |
+                                            CURSOR_FORMAT_MASK);
+                       } else {
+                               dc_set_clear(hw, DC_CURSOR_CONFIG + offset,
+                                            CURSOR_VALID(1),
+                                            CURSOR_FORMAT_MASK);
+                       }
+                       hw->cursor[i].dirty = false;
+               }
+       }
+}
drivers/gpu/drm/verisilicon/vs_dc_hw.h new file +580 -0
new file mode 100644
index 000000000000..fcf51f00adaa
@@ -0,0 +1,580 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2023 VeriSilicon Holdings Co., Ltd.
+ */
+
+#ifndef __VS_DC_HW_H__
+#define __VS_DC_HW_H__
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+
+#define UPDATE(x, h, l)                                FIELD_PREP(GENMASK(h, l), x)
+
+#define AQ_INTR_ACKNOWLEDGE                    0x0010
+#define AQ_INTR_ENBL                           0x0014
+#define DC_HW_REVISION                         0x0024
+#define DC_HW_CHIP_CID                         0x0030
+
+#define DC_REG_BASE                            0x0800
+#define DC_REG_RANGE                           0x2000
+#define DC_SEC_REG_OFFSET                      0x100000
+
+#define DC_FRAMEBUFFER_CONFIG                  0x1518
+# define PRIMARY_FORMAT(x)                     ((x) << 26)
+# define PRIMARY_FORMAT_MASK                   GENMASK(31, 26)
+# define PRIMARY_UV_SWIZ(x)                    ((x) << 25)
+# define PRIMARY_UV_SWIZ_MASK                  GENMASK(25, 25)
+# define PRIMARY_SWIZ(x)                       ((x) << 23)
+# define PRIMARY_SWIZ_MASK                     GENMASK(24, 23)
+# define PRIMARY_SCALE_EN                      BIT(12)
+# define PRIMARY_TILE(x)                       ((x) << 17)
+# define PRIMARY_TILE_MASK                     GENMASK(21, 17)
+# define PRIMARY_YUV_COLOR(x)                  ((x) << 14)
+# define PRIMARY_YUV_COLOR_MASK                        GENMASK(16, 14)
+# define PRIMARY_ROTATION(x)                   ((x) << 11)
+# define PRIMARY_ROTATION_MASK                 GENMASK(13, 11)
+# define PRIMARY_CLEAR_EN(x)                   ((x) << 8)
+# define PRIMARY_CLEAR_EN_MASK                 GENMASK(8, 8)
+
+#define DC_FRAMEBUFFER_CONFIG_EX               0x1CC0
+# define PRIMARY_CHANNEL(x)                    ((x) << 19)
+# define PRIMARY_CHANNEL_MASK                  GENMASK(19, 19)
+# define PRIMARY_ZPOS(x)                       ((x) << 16)
+# define PRIMARY_ZPOS_MASK                     GENMASK(18, 16)
+# define PRIMARY_EN(x)                         ((x) << 13)
+# define PRIMARY_EN_MASK                       GENMASK(13, 13)
+# define PRIMARY_SHADOW_EN                     BIT(12)
+# define PRIMARY_YUVCLAMP_EN                   BIT(8)
+# define PRIMARY_RGB2RGB_EN                    BIT(6)
+# define PRIMARY_SYNC1_EN                      BIT(4)
+# define PRIMARY_SYNC0_EN                      BIT(3)
+# define PRIMARY_DECODER_EN(x)                 ((x) << 1)
+# define PRIMARY_DECODER_EN_EN_MASK            GENMASK(1, 1)
+
+#define DC_FRAMEBUFFER_SCALE_CONFIG            0x1520
+#define DC_FRAMEBUFFER_TOP_LEFT                        0x24D8
+#define X_POS(x)                               (x)
+#define Y_POS(x)                               ((x) << 15)
+
+#define DC_FRAMEBUFFER_BOTTOM_RIGHT            0x24E0
+#define DC_FRAMEBUFFER_ADDRESS                 0x1400
+#define DC_FRAMEBUFFER_U_ADDRESS               0x1530
+#define DC_FRAMEBUFFER_V_ADDRESS               0x1538
+#define DC_FRAMEBUFFER_STRIDE                  0x1408
+#define DC_FRAMEBUFFER_U_STRIDE                        0x1800
+#define DC_FRAMEBUFFER_V_STRIDE                        0x1808
+#define DC_FRAMEBUFFER_SIZE                    0x1810
+#define FB_SIZE(w, h)                          ((w) | ((h) << 15))
+
+#define DC_FRAMEBUFFER_SCALE_FACTOR_X          0x1828
+#define DC_FRAMEBUFFER_SCALE_FACTOR_Y          0x1830
+#define DC_FRAMEBUFFER_H_FILTER_COEF_INDEX     0x1838
+#define DC_FRAMEBUFFER_H_FILTER_COEF_DATA      0x1A00
+#define DC_FRAMEBUFFER_V_FILTER_COEF_INDEX     0x1A08
+#define DC_FRAMEBUFFER_V_FILTER_COEF_DATA      0x1A10
+#define DC_FRAMEBUFFER_INIT_OFFSET             0x1A20
+#define DC_FRAMEBUFFER_COLOR_KEY               0x1508
+#define DC_FRAMEBUFFER_COLOR_KEY_HIGH          0x1510
+#define DC_FRAMEBUFFER_CLEAR_VALUE             0x1A18
+#define DC_FRAMEBUFFER_COLOR_TABLE_INDEX       0x1818
+#define DC_FRAMEBUFFER_COLOR_TABLE_DATA                0x1820
+#define DC_FRAMEBUFFER_BG_COLOR                        0x1528
+#define DC_FRAMEBUFFER_ROI_ORIGIN              0x1CB0
+#define DC_FRAMEBUFFER_ROI_SIZE                        0x1CB8
+#define DC_FRAMEBUFFER_WATER_MARK              0x1CE8
+#define DC_FRAMEBUFFER_DEGAMMA_INDEX           0x1D88
+#define DC_FRAMEBUFFER_DEGAMMA_DATA            0x1D90
+#define DC_FRAMEBUFFER_DEGAMMA_EX_DATA         0x1D98
+#define DC_FRAMEBUFFER_YUVTORGB_COEF0          0x1DA0
+#define DC_FRAMEBUFFER_YUVTORGB_COEF1          0x1DA8
+#define DC_FRAMEBUFFER_YUVTORGB_COEF2          0x1DB0
+#define DC_FRAMEBUFFER_YUVTORGB_COEF3          0x1DB8
+#define DC_FRAMEBUFFER_YUVTORGB_COEF4          0x1E00
+#define DC_FRAMEBUFFER_YUVTORGB_COEFD0         0x1E08
+#define DC_FRAMEBUFFER_YUVTORGB_COEFD1         0x1E10
+#define DC_FRAMEBUFFER_YUVTORGB_COEFD2         0x1E18
+#define DC_FRAMEBUFFER_Y_CLAMP_BOUND           0x1E88
+#define DC_FRAMEBUFFER_UV_CLAMP_BOUND          0x1E90
+#define DC_FRAMEBUFFER_RGBTORGB_COEF0          0x1E20
+#define DC_FRAMEBUFFER_RGBTORGB_COEF1          0x1E28
+#define DC_FRAMEBUFFER_RGBTORGB_COEF2          0x1E30
+#define DC_FRAMEBUFFER_RGBTORGB_COEF3          0x1E38
+#define DC_FRAMEBUFFER_RGBTORGB_COEF4          0x1E40
+#define DC_FRAMEBUFFER_BLEND_CONFIG            0x2510
+# define BLEND_PREMULTI                                0x3450
+# define BLEND_COVERAGE                                0x3950
+# define BLEND_PIXEL_NONE                      0x3548
+
+#define DC_FRAMEBUFFER_SRC_GLOBAL_COLOR                0x2500
+# define PRIMARY_ALPHA_LEN(x)                  ((x) << 24)
+
+#define DC_FRAMEBUFFER_DST_GLOBAL_COLOR                0x2508
+
+#define DC_OVERLAY_CONFIG                      0x1540
+# define OVERLAY_SHADOW_EN                     BIT(31)
+# define OVERLAY_CLAMP_EN                      BIT(30)
+# define OVERLAY_RGB2RGB_EN                    BIT(29)
+# define OVERLAY_DEC_EN(x)                     ((x) << 27)
+# define OVERLAY_DEC_EN_MASK                   GENMASK(27, 27)
+# define OVERLAY_CLEAR_EN(x)                   ((x) << 25)
+# define OVERLAY_CLEAR_EN_MASK                 GENMASK(25, 25)
+# define OVERLAY_FB_EN(x)                      ((x) << 24)
+# define OVERLAY_FB_EN_MASK                    GENMASK(24, 24)
+# define OVERLAY_FORMAT(x)                     ((x) << 16)
+# define OVERLAY_FORMAT_MASK                   GENMASK(21, 16)
+# define OVERLAY_UV_SWIZ(x)                    ((x) << 15)
+# define OVERLAY_UV_SWIZ_MASK                  GENMASK(15, 15)
+# define OVERLAY_SWIZ(x)                       ((x) << 13)
+# define OVERLAY_SWIZ_MASK                     GENMASK(14, 13)
+# define OVERLAY_TILE(x)                       ((x) << 8)
+# define OVERLAY_TILE_MASK                     GENMASK(12, 8)
+# define OVERLAY_YUV_COLOR(x)                  ((x) << 5)
+# define OVERLAY_YUV_COLOR_MASK                        GENMASK(7, 5)
+# define OVERLAY_ROTATION(x)                   ((x) << 2)
+# define OVERLAY_ROTATION_MASK                 GENMASK(4, 2)
+
+#define DC_OVERLAY_CONFIG_EX                   0x2540
+# define OVERLAY_LAYER_SEL(x)                  ((x) << 0)
+# define OVERLAY_LAYER_SEL_MASK                        GENMASK(2, 0)
+# define OVERLAY_PANEL_SEL(x)                  ((x) << 3)
+# define OVERLAY_PANEL_SEL_MASK                        GENMASK(3, 3)
+
+#define DC_OVERLAY_SCALE_CONFIG                        0x1C00
+# define OVERLAY_SCALE_EN                      BIT(8)
+
+#define DC_OVERLAY_BLEND_CONFIG                        0x1580
+#define DC_OVERLAY_TOP_LEFT                    0x1640
+#define DC_OVERLAY_BOTTOM_RIGHT                        0x1680
+#define DC_OVERLAY_ADDRESS                     0x15C0
+#define DC_OVERLAY_U_ADDRESS                   0x1840
+#define DC_OVERLAY_V_ADDRESS                   0x1880
+#define DC_OVERLAY_STRIDE                      0x1600
+#define DC_OVERLAY_U_STRIDE                    0x18C0
+#define DC_OVERLAY_V_STRIDE                    0x1900
+#define DC_OVERLAY_SIZE                                0x17C0
+#define DC_OVERLAY_SCALE_FACTOR_X              0x1A40
+#define DC_OVERLAY_SCALE_FACTOR_Y              0x1A80
+#define DC_OVERLAY_H_FILTER_COEF_INDEX         0x1AC0
+#define DC_OVERLAY_H_FILTER_COEF_DATA          0x1B00
+#define DC_OVERLAY_V_FILTER_COEF_INDEX         0x1B40
+#define DC_OVERLAY_V_FILTER_COEF_DATA          0x1B80
+#define DC_OVERLAY_INIT_OFFSET                 0x1BC0
+#define DC_OVERLAY_COLOR_KEY                   0x1740
+#define DC_OVERLAY_COLOR_KEY_HIGH              0x1780
+#define DC_OVERLAY_CLEAR_VALUE                 0x1940
+#define DC_OVERLAY_COLOR_TABLE_INDEX           0x1980
+#define DC_OVERLAY_COLOR_TABLE_DATA            0x19C0
+#define DC_OVERLAY_SRC_GLOBAL_COLOR            0x16C0
+# define OVERLAY_ALPHA_LEN(x)                  ((x) << 24)
+
+#define DC_OVERLAY_DST_GLOBAL_COLOR            0x1700
+#define DC_OVERLAY_ROI_ORIGIN                  0x1D00
+#define DC_OVERLAY_ROI_SIZE                    0x1D40
+#define DC_OVERLAY_WATER_MARK                  0x1DC0
+#define DC_OVERLAY_DEGAMMA_INDEX               0x2200
+#define DC_OVERLAY_DEGAMMA_DATA                        0x2240
+#define DC_OVERLAY_DEGAMMA_EX_DATA             0x2280
+#define DC_OVERLAY_YUVTORGB_COEF0              0x1EC0
+#define DC_OVERLAY_YUVTORGB_COEF1              0x1F00
+#define DC_OVERLAY_YUVTORGB_COEF2              0x1F40
+#define DC_OVERLAY_YUVTORGB_COEF3              0x1F80
+#define DC_OVERLAY_YUVTORGB_COEF4              0x1FC0
+#define DC_OVERLAY_YUVTORGB_COEFD0             0x2000
+#define DC_OVERLAY_YUVTORGB_COEFD1             0x2040
+#define DC_OVERLAY_YUVTORGB_COEFD2             0x2080
+#define DC_OVERLAY_Y_CLAMP_BOUND               0x22C0
+#define DC_OVERLAY_UV_CLAMP_BOUND              0x2300
+#define DC_OVERLAY_RGBTORGB_COEF0              0x20C0
+#define DC_OVERLAY_RGBTORGB_COEF1              0x2100
+#define DC_OVERLAY_RGBTORGB_COEF2              0x2140
+#define DC_OVERLAY_RGBTORGB_COEF3              0x2180
+#define DC_OVERLAY_RGBTORGB_COEF4              0x21C0
+
+#define DC_CURSOR_CONFIG                       0x1468
+# define CURSOR_HOT_X(x)                       ((x) << 16)
+# define CURSOR_HOT_X_MASK                     GENMASK(23, 16)
+# define CURSOR_HOT_y(x)                       ((x) << 8)
+# define CURSOR_HOT_y_MASK                     GENMASK(15, 8)
+# define CURSOR_SIZE(x)                                ((x) << 5)
+# define CURSOR_SIZE_MASK                      GENMASK(7, 5)
+# define CURSOR_VALID(x)                       ((x) << 3)
+# define CURSOR_VALID_MASK                     GENMASK(3, 3)
+# define CURSOR_TRIG_FETCH(x)                  ((x) << 2)
+# define CURSOR_TRIG_FETCH_MASK                        GENMASK(2, 2)
+# define CURSOR_FORMAT(x)                      ((x) << 0)
+# define CURSOR_FORMAT_MASK                    GENMASK(1, 0)
+# define CURSOR_FORMAT_DISABLE                 0
+# define CURSOR_FORMAT_MARK                    1
+# define CURSOR_FORMAT_A8R8G8B8                        2
+
+#define DC_CURSOR_ADDRESS                      0x146C
+#define DC_CURSOR_LOCATION                     0x1470
+# define X_LCOTION(x)                          (x)
+# define Y_LCOTION(x)                          ((x) << 16)
+
+#define DC_CURSOR_BACKGROUND                   0x1474
+#define DC_CURSOR_FOREGROUND                   0x1478
+#define DC_CURSOR_CLK_GATING                   0x1484
+#define DC_CURSOR_CONFIG_EX                    0x24E8
+#define DC_CURSOR_OFFSET                       0x1080
+
+#define DC_DISPLAY_DITHER_CONFIG               0x1410
+#define DC_DISPLAY_PANEL_CONFIG                        0x1418
+# define PANEL_RGB2YUV_EN                      BIT(16)
+# define PANEL_GAMMA_EN                                BIT(13)
+# define PANEL_OUTPUT_EN                       BIT(12)
+
+#define DC_DISPLAY_PANEL_CONFIG_EX             0x2518
+# define PANEL_SHADOW_EN                       BIT(0)
+
+#define DC_DISPLAY_DITHER_TABLE_LOW            0x1420
+#define DC_DISPLAY_DITHER_TABLE_HIGH           0x1428
+#define DC_DISPLAY_H                           0x1430
+# define H_ACTIVE_LEN(x)                       (x)
+# define H_TOTAL_LEN(x)                                ((x) << 16)
+
+#define DC_DISPLAY_H_SYNC                      0x1438
+# define H_SYNC_START_LEN(x)                   (x)
+# define H_SYNC_END_LEN(x)                     ((x) << 15)
+# define H_PLUS_LEN(x)                         ((x) << 30)
+# define H_POLARITY_LEN(x)                     ((x) << 31)
+
+#define DC_DISPLAY_V                           0x1440
+# define V_ACTIVE_LEN(x)                       (x)
+# define V_TOTAL_LEN(x)                                ((x) << 16)
+
+#define DC_DISPLAY_V_SYNC                      0x1448
+# define V_SYNC_START_LEN(x)                   (x)
+# define V_SYNC_END_LEN(x)                     ((x) << 15)
+# define V_PLUS_LEN(x)                         ((x) << 30)
+# define V_POLARITY_LEN(x)                     ((x) << 31)
+
+#define DC_DISPLAY_CURRENT_LOCATION            0x1450
+#define DC_DISPLAY_GAMMA_INDEX                 0x1458
+#define DC_DISPLAY_GAMMA_DATA                  0x1460
+#define DC_DISPLAY_INT                         0x147C
+#define DC_DISPLAY_INT_ENABLE                  0x1480
+#define DC_DISPLAY_DBI_CONFIG                  0x1488
+#define DC_DISPLAY_GENERAL_CONFIG              0x14B0
+#define DC_DISPLAY_DPI_CONFIG                  0x14B8
+#define DC_DISPLAY_PANEL_START                 0x1CCC
+# define PANEL0_EN                             BIT(0)
+# define PANEL1_EN                             BIT(1)
+# define TWO_PANEL_EN                          BIT(2)
+# define SYNC_EN                               BIT(3)
+
+#define DC_DISPLAY_DEBUG_COUNTER_SELECT                0x14D0
+#define DC_DISPLAY_DEBUG_COUNTER_VALUE         0x14D8
+#define DC_DISPLAY_DP_CONFIG                   0x1CD0
+# define DP_SELECT                             BIT(3)
+
+#define DC_DISPLAY_GAMMA_EX_INDEX              0x1CF0
+#define DC_DISPLAY_GAMMA_EX_DATA               0x1CF8
+#define DC_DISPLAY_GAMMA_EX_ONE_DATA           0x1D80
+#define DC_DISPLAY_RGBTOYUV_COEF0              0x1E48
+#define DC_DISPLAY_RGBTOYUV_COEF1              0x1E50
+#define DC_DISPLAY_RGBTOYUV_COEF2              0x1E58
+#define DC_DISPLAY_RGBTOYUV_COEF3              0x1E60
+#define DC_DISPLAY_RGBTOYUV_COEF4              0x1E68
+#define DC_DISPLAY_RGBTOYUV_COEFD0             0x1E70
+#define DC_DISPLAY_RGBTOYUV_COEFD1             0x1E78
+#define DC_DISPLAY_RGBTOYUV_COEFD2             0x1E80
+
+#define DC_CLK_GATTING                         0x1A28
+#define DC_QOS_CONFIG                          0x1A38
+
+#define DC_TRANSPARENCY_OPAQUE                 0x00
+#define DC_TRANSPARENCY_KEY                    0x02
+#define DC_DISPLAY_DITHERTABLE_LOW             0x7B48F3C0
+#define DC_DISPLAY_DITHERTABLE_HIGH            0x596AD1E2
+
+#define GAMMA_SIZE                             256
+#define GAMMA_EX_SIZE                          300
+#define DEGAMMA_SIZE                           260
+
+#define RGB_TO_RGB_TABLE_SIZE                  9
+#define YUV_TO_RGB_TABLE_SIZE                  16
+#define RGB_TO_YUV_TABLE_SIZE                  12
+
+#define DC_LAYER_NUM   6
+#define DC_DISPLAY_NUM 2
+#define DC_CURSOR_NUM  2
+
+#define DC_TILE_MODE4X4        0x15
+
+enum dc_hw_plane_id {
+       PRIMARY_PLANE_0,
+       OVERLAY_PLANE_0,
+       OVERLAY_PLANE_1,
+       PRIMARY_PLANE_1,
+       OVERLAY_PLANE_2,
+       OVERLAY_PLANE_3,
+       CURSOR_PLANE_0,
+       CURSOR_PLANE_1,
+       PLANE_NUM
+};
+
+enum dc_hw_color_format {
+       FORMAT_X4R4G4B4,
+       FORMAT_A4R4G4B4,
+       FORMAT_X1R5G5B5,
+       FORMAT_A1R5G5B5,
+       FORMAT_R5G6B5,
+       FORMAT_X8R8G8B8,
+       FORMAT_A8R8G8B8,
+       FORMAT_YUY2,
+       FORMAT_UYVY,
+       FORMAT_INDEX8,
+       FORMAT_MONOCHROME,
+       FORMAT_YV12 = 0xf,
+       FORMAT_A8,
+       FORMAT_NV12,
+       FORMAT_NV16,
+       FORMAT_RG16,
+       FORMAT_R8,
+       FORMAT_NV12_10BIT,
+       FORMAT_A2R10G10B10,
+       FORMAT_NV16_10BIT,
+       FORMAT_INDEX1,
+       FORMAT_INDEX2,
+       FORMAT_INDEX4,
+       FORMAT_P010,
+       FORMAT_YUV444,
+       FORMAT_YUV444_10BIT,
+};
+
+enum dc_hw_yuv_color_space {
+       COLOR_SPACE_601 = 0,
+       COLOR_SPACE_709 = 1,
+       COLOR_SPACE_2020 = 3,
+};
+
+enum dc_hw_rotation {
+       ROT_0 = 0,
+       ROT_90 = 4,
+       ROT_180 = 5,
+       ROT_270 = 6,
+       FLIP_X = 1,
+       FLIP_Y = 2,
+       FLIP_XY = 3,
+};
+
+enum dc_hw_swizzle {
+       SWIZZLE_ARGB = 0,
+       SWIZZLE_RGBA,
+       SWIZZLE_ABGR,
+       SWIZZLE_BGRA,
+};
+
+enum dc_hw_out {
+       OUT_DPI,
+       OUT_DP,
+};
+
+enum dc_hw_cursor_size {
+       CURSOR_SIZE_32X32 = 0,
+       CURSOR_SIZE_64X64,
+};
+
+struct dc_hw_plane_reg {
+       u32 y_address;
+       u32 u_address;
+       u32 v_address;
+       u32 y_stride;
+       u32 u_stride;
+       u32 v_stride;
+       u32 size;
+       u32 top_left;
+       u32 bottom_right;
+       u32 scale_factor_x;
+       u32 scale_factor_y;
+       u32 h_filter_coef_index;
+       u32 h_filter_coef_data;
+       u32 v_filter_coef_index;
+       u32 v_filter_coef_data;
+       u32 init_offset;
+       u32 color_key;
+       u32 color_key_high;
+       u32 clear_value;
+       u32 color_table_index;
+       u32 color_table_data;
+       u32 scale_config;
+       u32 water_mark;
+       u32 degamma_index;
+       u32 degamma_data;
+       u32 degamma_ex_data;
+       u32 src_global_color;
+       u32 dst_global_color;
+       u32 blend_config;
+       u32 roi_origin;
+       u32 roi_size;
+       u32 yuv_to_rgb_coef0;
+       u32 yuv_to_rgb_coef1;
+       u32 yuv_to_rgb_coef2;
+       u32 yuv_to_rgb_coef3;
+       u32 yuv_to_rgb_coef4;
+       u32 yuv_to_rgb_coefd0;
+       u32 yuv_to_rgb_coefd1;
+       u32 yuv_to_rgb_coefd2;
+       u32 y_clamp_bound;
+       u32 uv_clamp_bound;
+       u32 rgb_to_rgb_coef0;
+       u32 rgb_to_rgb_coef1;
+       u32 rgb_to_rgb_coef2;
+       u32 rgb_to_rgb_coef3;
+       u32 rgb_to_rgb_coef4;
+};
+
+struct dc_hw_fb {
+       u32 y_address;
+       u32 u_address;
+       u32 v_address;
+       u32 clear_value;
+       u32 water_mark;
+       u16 y_stride;
+       u16 u_stride;
+       u16 v_stride;
+       u16 width;
+       u16 height;
+       u8      format;
+       u8      tile_mode;
+       u8      rotation;
+       u8      yuv_color_space;
+       u8      swizzle;
+       u8      uv_swizzle;
+       u8      zpos;
+       u8      display_id;
+       bool    clear_enable;
+       bool    dec_enable;
+       bool    enable;
+       bool    dirty;
+};
+
+struct dc_hw_scale {
[… more lines in the raw message]

Lines of this file are not shown. View the raw message.

drivers/gpu/drm/verisilicon/vs_drv.c +2 -0
index 4fb1f29ef84b..3ef90c8238a0 100644

Lines of this file are not shown. View the raw message.

drivers/gpu/drm/verisilicon/vs_plane.c new file +301 -0
new file mode 100644
index 000000000000..53580fbe05b1

Lines of this file are not shown. View the raw message.

drivers/gpu/drm/verisilicon/vs_plane.h new file +39 -0
new file mode 100644
index 000000000000..7174ac298ffd

Lines of this file are not shown. View the raw message.

drivers/gpu/drm/verisilicon/vs_type.h new file +37 -0
new file mode 100644
index 000000000000..7d3378e29c87

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

I could not fine a call to either of drm_plane_create_zpos_property() and drm_plane_create_zpos_immutable_property().
Please add them to document your zpos values.

Quoted 34 lines
drivers/gpu/drm/verisilicon/vs_type.h new file +32 -1

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

Quoted 2 lines

2.34.1

--
With best wishes

Dmitry

Part of the diff is not shown here. View the raw message.

#15 lore raw

Re: [v3 4/6] drm/vs: Add KMS crtc&plane

In reply to Keith Zhao
kernel test robot noticed the following build warnings:

Hi Keith,

kernel test robot noticed the following build warnings:

[auto build test WARNING on robh/for-next]
[also build test WARNING on linus/master v6.7-rc4]
[cannot apply to drm-misc/drm-misc-next drm/drm-next next-20231205] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Keith-Zhao/dt-bindings-display-Add-yamls-for-JH7110-display-system/20231204-203725
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
patch link:    https://lore.kernel.org/r/20231204123315.28456-5-keith.zhao%40starfivetech.com
patch subject: [v3 4/6] drm/vs: Add KMS crtc&plane
config: powerpc-allmodconfig (https://download.01.org/0day-ci/archive/20231205/[email protected]/config)
compiler: clang version 17.0.0 (https://github.com/llvm/llvm-project.git 4a5ac14ee968ff0ad5d2cc1ffa0299048db4c88a)
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20231205/[email protected]/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/

All warnings (new ones prefixed by >>):

drivers/gpu/drm/verisilicon/vs_dc.c:970:9: warning: variable 'ret' set but not used [-Wunused-but-set-variable]

     970 |         u32 i, ret;
         |                ^
>> drivers/gpu/drm/verisilicon/vs_dc.c:78:18: warning: unused variable 'primary_overlay_format1' [-Wunused-const-variable]
      78 | static const u32 primary_overlay_format1[] = {
         |                  ^

2 warnings generated.

Kconfig warnings: (for reference only)
WARNING: unmet direct dependencies detected for DMA_CMA Depends on [n]: HAVE_DMA_CONTIGUOUS [=n] && CMA [=y] Selected by [m]:
- DRM_VERISILICON [=m] && HAS_IOMEM [=y] && DRM [=m]

vim +/primary_overlay_format1 +78 drivers/gpu/drm/verisilicon/vs_dc.c

    77	
  > 78	static const u32 primary_overlay_format1[] = {
    79		DRM_FORMAT_XRGB8888,
    80		DRM_FORMAT_XBGR8888,
    81		DRM_FORMAT_RGBX8888,
    82		DRM_FORMAT_BGRX8888,
    83		DRM_FORMAT_ARGB8888,
    84		DRM_FORMAT_ABGR8888,
    85		DRM_FORMAT_RGBA8888,
    86		DRM_FORMAT_BGRA8888,
    87		DRM_FORMAT_ARGB2101010,
    88		DRM_FORMAT_ABGR2101010,
    89		DRM_FORMAT_RGBA1010102,
    90		DRM_FORMAT_BGRA1010102,
    91		DRM_FORMAT_NV12,
    92		DRM_FORMAT_NV21,
    93		DRM_FORMAT_YUV444,
    94	};
    95	
Signature · 2 lines
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
maintainer
#16 lore raw

Re: [v3 4/6] drm/vs: Add KMS crtc&plane

In reply to Keith Zhao
Quoted 230 lines · Keith Zhao
drivers/gpu/drm/verisilicon/vs_dc.c new file +230 -0
+static const struct vs_plane_info dc_hw_planes_rev0[PLANE_NUM] = {
+	{
+		.name			= "Primary",
+		.id			= PRIMARY_PLANE_0,
+		.type			= DRM_PLANE_TYPE_PRIMARY,
+		.num_formats		= ARRAY_SIZE(primary_overlay_format0),
+		.formats		= primary_overlay_format0,
+		.num_modifiers		= ARRAY_SIZE(format_modifier0),
+		.modifiers		= format_modifier0,
+		.min_width		= 0,
+		.min_height		= 0,
+		.max_width		= 4096,
+		.max_height		= 4096,
+		.rotation		= DRM_MODE_ROTATE_0 |
+					  DRM_MODE_ROTATE_90 |
+					  DRM_MODE_ROTATE_180 |
+					  DRM_MODE_ROTATE_270 |
+					  DRM_MODE_REFLECT_X |
+					  DRM_MODE_REFLECT_Y,
+		.blend_mode		= BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+					  BIT(DRM_MODE_BLEND_PREMULTI) |
+					  BIT(DRM_MODE_BLEND_COVERAGE),
+		.color_encoding		= BIT(DRM_COLOR_YCBCR_BT709) |
+					  BIT(DRM_COLOR_YCBCR_BT2020),
+		.degamma_size		= DEGAMMA_SIZE,
+		.min_scale		= FRAC_16_16(1, 3),
+		.max_scale		= FRAC_16_16(10, 1),
+		.zpos			= 0,
+		.watermark		= true,
+		.color_mgmt		= true,
+		.roi			= true,
+	},
+	{
+		.name			= "Overlay",
+		.id			= OVERLAY_PLANE_0,
+		.type			= DRM_PLANE_TYPE_OVERLAY,
+		.num_formats		= ARRAY_SIZE(primary_overlay_format0),
+		.formats		= primary_overlay_format0,
+		.num_modifiers		= ARRAY_SIZE(format_modifier0),
+		.modifiers		= format_modifier0,
+		.min_width		= 0,
+		.min_height		= 0,
+		.max_width		= 4096,
+		.max_height		= 4096,
+		.rotation		= DRM_MODE_ROTATE_0 |
+					  DRM_MODE_ROTATE_90 |
+					  DRM_MODE_ROTATE_180 |
+					  DRM_MODE_ROTATE_270 |
+					  DRM_MODE_REFLECT_X |
+					  DRM_MODE_REFLECT_Y,
+		.blend_mode		= BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+					  BIT(DRM_MODE_BLEND_PREMULTI) |
+					  BIT(DRM_MODE_BLEND_COVERAGE),
+		.color_encoding		= BIT(DRM_COLOR_YCBCR_BT709) |
+					  BIT(DRM_COLOR_YCBCR_BT2020),
+		.degamma_size		= DEGAMMA_SIZE,
+		.min_scale		= FRAC_16_16(1, 3),
+		.max_scale		= FRAC_16_16(10, 1),
+		.zpos			= 1,
+		.watermark		= true,
+		.color_mgmt		= true,
+		.roi			= true,
+	},
+	{
+		.name			= "Overlay_1",
+		.id			= OVERLAY_PLANE_1,
+		.type			= DRM_PLANE_TYPE_OVERLAY,
+		.num_formats		= ARRAY_SIZE(primary_overlay_format0),
+		.formats		= primary_overlay_format0,
+		.num_modifiers		= ARRAY_SIZE(secondary_format_modifiers),
+		.modifiers		= secondary_format_modifiers,
+		.min_width		= 0,
+		.min_height		= 0,
+		.max_width		= 4096,
+		.max_height		= 4096,
+		.rotation		= 0,
+		.blend_mode		= BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+					  BIT(DRM_MODE_BLEND_PREMULTI) |
+					  BIT(DRM_MODE_BLEND_COVERAGE),
+		.color_encoding		= BIT(DRM_COLOR_YCBCR_BT709) |
+					  BIT(DRM_COLOR_YCBCR_BT2020),
+		.degamma_size		= DEGAMMA_SIZE,
+		.min_scale		= DRM_PLANE_NO_SCALING,
+		.max_scale		= DRM_PLANE_NO_SCALING,
+		.zpos			= 2,
+		.watermark		= true,
+		.color_mgmt		= true,
+		.roi			= true,
+	},
+	{
+		.name			= "Primary_1",
+		.id			= PRIMARY_PLANE_1,
+		.type			= DRM_PLANE_TYPE_PRIMARY,
+		.num_formats		= ARRAY_SIZE(primary_overlay_format0),
+		.formats		= primary_overlay_format0,
+		.num_modifiers		= ARRAY_SIZE(format_modifier0),
+		.modifiers		= format_modifier0,
+		.min_width		= 0,
+		.min_height		= 0,
+		.max_width		= 4096,
+		.max_height		= 4096,
+		.rotation		= DRM_MODE_ROTATE_0 |
+					  DRM_MODE_ROTATE_90 |
+					  DRM_MODE_ROTATE_180 |
+					  DRM_MODE_ROTATE_270 |
+					  DRM_MODE_REFLECT_X |
+					  DRM_MODE_REFLECT_Y,
+		.blend_mode		= BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+					  BIT(DRM_MODE_BLEND_PREMULTI) |
+					  BIT(DRM_MODE_BLEND_COVERAGE),
+		.color_encoding		= BIT(DRM_COLOR_YCBCR_BT709) |
+					  BIT(DRM_COLOR_YCBCR_BT2020),
+		.degamma_size		= DEGAMMA_SIZE,
+		.min_scale		= FRAC_16_16(1, 3),
+		.max_scale		= FRAC_16_16(10, 1),
+		.zpos			= 3,
+		.watermark		= true,
+		.color_mgmt		= true,
+		.roi			= true,
+	},
+	{
+		.name			= "Overlay_2",
+		.id			= OVERLAY_PLANE_2,
+		.type			= DRM_PLANE_TYPE_OVERLAY,
+		.num_formats		= ARRAY_SIZE(primary_overlay_format0),
+		.formats		= primary_overlay_format0,
+		.num_modifiers		= ARRAY_SIZE(format_modifier0),
+		.modifiers		= format_modifier0,
+		.min_width		= 0,
+		.min_height		= 0,
+		.max_width		= 4096,
+		.max_height		= 4096,
+		.rotation		= DRM_MODE_ROTATE_0 |
+					  DRM_MODE_ROTATE_90 |
+					  DRM_MODE_ROTATE_180 |
+					  DRM_MODE_ROTATE_270 |
+					  DRM_MODE_REFLECT_X |
+					  DRM_MODE_REFLECT_Y,
+		.blend_mode		= BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+					  BIT(DRM_MODE_BLEND_PREMULTI) |
+					  BIT(DRM_MODE_BLEND_COVERAGE),
+		.color_encoding		= BIT(DRM_COLOR_YCBCR_BT709) |
+					  BIT(DRM_COLOR_YCBCR_BT2020),
+		.degamma_size		= DEGAMMA_SIZE,
+		.min_scale		= FRAC_16_16(1, 3),
+		.max_scale		= FRAC_16_16(10, 1),
+		.zpos			= 4,
+		.watermark		= true,
+		.color_mgmt		= true,
+		.roi			= true,
+	},
+	{
+		.name			= "Overlay_3",
+		.id			= OVERLAY_PLANE_3,
+		.type			= DRM_PLANE_TYPE_OVERLAY,
+		.num_formats		= ARRAY_SIZE(primary_overlay_format0),
+		.formats		= primary_overlay_format0,
+		.num_modifiers		= ARRAY_SIZE(secondary_format_modifiers),
+		.modifiers		= secondary_format_modifiers,
+		.min_width		= 0,
+		.min_height		= 0,
+		.max_width		= 4096,
+		.max_height		= 4096,
+		.rotation		= 0,
+		.blend_mode		= BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+					  BIT(DRM_MODE_BLEND_PREMULTI) |
+					  BIT(DRM_MODE_BLEND_COVERAGE),
+		.color_encoding		= BIT(DRM_COLOR_YCBCR_BT709) |
+					  BIT(DRM_COLOR_YCBCR_BT2020),
+		.degamma_size		= DEGAMMA_SIZE,
+		.min_scale		= DRM_PLANE_NO_SCALING,
+		.max_scale		= DRM_PLANE_NO_SCALING,
+		.zpos			= 5,
+		.watermark		= true,
+		.color_mgmt		= true,
+		.roi			= true,
+	},
+	{
+		.name			= "Cursor",
+		.id			= CURSOR_PLANE_0,
+		.type			= DRM_PLANE_TYPE_CURSOR,
+		.num_formats		= ARRAY_SIZE(cursor_formats),
+		.formats		= cursor_formats,
+		.num_modifiers		= 0,
+		.modifiers		= NULL,
+		.min_width		= 32,
+		.min_height		= 32,
+		.max_width		= 64,
+		.max_height		= 64,
+		.rotation		= 0,
+		.degamma_size		= 0,
+		.min_scale		= DRM_PLANE_NO_SCALING,
+		.max_scale		= DRM_PLANE_NO_SCALING,
+		.zpos			= 255,
+		.watermark		= false,
+		.color_mgmt		= false,
+		.roi			= false,
+	},
+	{
+		.name			= "Cursor_1",
+		.id			= CURSOR_PLANE_1,
+		.type			= DRM_PLANE_TYPE_CURSOR,
+		.num_formats		= ARRAY_SIZE(cursor_formats),
+		.formats		= cursor_formats,
+		.num_modifiers		= 0,
+		.modifiers		= NULL,
+		.min_width		= 32,
+		.min_height		= 32,
+		.max_width		= 64,
+		.max_height		= 64,
+		.rotation		= 0,
+		.degamma_size		= 0,
+		.min_scale		= DRM_PLANE_NO_SCALING,
+		.max_scale		= DRM_PLANE_NO_SCALING,
+		.zpos			= 255,
+		.watermark		= false,
+		.color_mgmt		= false,
+		.roi			= false,
+	},
+};
+
+static const struct vs_dc_info dc8200_info = {
+	.name			= "DC8200",
+	.panel_num		= 2,
+	.plane_num		= 8,
+	.planes			= dc_hw_planes_rev0,
+	.layer_num		= 6,
+	.max_bpc		= 10,
+	.color_formats		= DRM_COLOR_FORMAT_RGB444 |
+				  DRM_COLOR_FORMAT_YCBCR444 |

drivers/gpu/drm/verisilicon/vs_dc.c line 349

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_dc.c new file +10 -0
+				  DRM_COLOR_FORMAT_YCBCR422 |
+				  DRM_COLOR_FORMAT_YCBCR420,
+	.gamma_size		= GAMMA_EX_SIZE,
+	.gamma_bits		= 12,
+	.pitch_alignment	= 128,
+	.pipe_sync		= false,
+	.background		= true,
+	.panel_sync		= true,
+	.cap_dec		= true,
+};

I really think that entire thing is to workaround a suboptimal device tree binding. You should have two CRTCs in the device tree, you'll probe twice, and you won't get to do that whole dance.

Quoted 38 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.h new file +38 -0
+struct dc_hw_plane_reg {
+	u32 y_address;
+	u32 u_address;
+	u32 v_address;
+	u32 y_stride;
+	u32 u_stride;
+	u32 v_stride;
+	u32 size;
+	u32 top_left;
+	u32 bottom_right;
+	u32 scale_factor_x;
+	u32 scale_factor_y;
+	u32 h_filter_coef_index;
+	u32 h_filter_coef_data;
+	u32 v_filter_coef_index;
+	u32 v_filter_coef_data;
+	u32 init_offset;
+	u32 color_key;
+	u32 color_key_high;
+	u32 clear_value;
+	u32 color_table_index;
+	u32 color_table_data;
+	u32 scale_config;
+	u32 water_mark;
+	u32 degamma_index;
+	u32 degamma_data;
+	u32 degamma_ex_data;
+	u32 src_global_color;
+	u32 dst_global_color;
+	u32 blend_config;
+	u32 roi_origin;
+	u32 roi_size;
+	u32 yuv_to_rgb_coef0;
+	u32 yuv_to_rgb_coef1;
+	u32 yuv_to_rgb_coef2;
+	u32 yuv_to_rgb_coef3;
+	u32 yuv_to_rgb_coef4;
+	u32 yuv_to_rgb_coefd0;

drivers/gpu/drm/verisilicon/vs_dc_hw.h line 427

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.h new file +10 -0
+	u32 yuv_to_rgb_coefd1;
+	u32 yuv_to_rgb_coefd2;
+	u32 y_clamp_bound;
+	u32 uv_clamp_bound;
+	u32 rgb_to_rgb_coef0;
+	u32 rgb_to_rgb_coef1;
+	u32 rgb_to_rgb_coef2;
+	u32 rgb_to_rgb_coef3;
+	u32 rgb_to_rgb_coef4;
+};

That's your plane state.

Quoted 14 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.h new file +14 -0
+struct dc_hw_fb {
+	u32 y_address;
+	u32 u_address;
+	u32 v_address;
+	u32 clear_value;
+	u32 water_mark;
+	u16 y_stride;
+	u16 u_stride;
+	u16 v_stride;
+	u16 width;
+	u16 height;
+	u8	format;
+	u8	tile_mode;
+	u8	rotation;

drivers/gpu/drm/verisilicon/vs_dc_hw.h line 452

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.h new file +10 -0
+	u8	yuv_color_space;
+	u8	swizzle;
+	u8	uv_swizzle;
+	u8	zpos;
+	u8	display_id;
+	bool	clear_enable;
+	bool	dec_enable;
+	bool	enable;
+	bool	dirty;
+};

Your framebuffer

Quoted 17 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.h new file +17 -0
+struct dc_hw_scale {
+	u32 scale_factor_x;
+	u32 scale_factor_y;
+	bool	enable;
+	bool	dirty;
+};
+
+struct dc_hw_position {
+	u16 start_x;
+	u16 start_y;
+	u16 end_x;
+	u16 end_y;
+	bool	dirty;
+};
+
+struct dc_hw_blend {
+	u8	alpha;

drivers/gpu/drm/verisilicon/vs_dc_hw.h line 480

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.h new file +10 -0
+	u8	blend_mode;
+	bool	dirty;
+};
+
+struct dc_hw_colorkey {
+	u32 colorkey;
+	u32 colorkey_high;
+	u8	transparency;
+	bool dirty;
+};

Your CRTC state.

Quoted 26 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.h new file +26 -0
+struct dc_hw_roi {
+	u16 x;
+	u16 y;
+	u16 width;
+	u16 height;
+	bool enable;
+	bool dirty;
+};
+
+struct dc_hw_cursor {
+	u32 address;
+	u16 x;
+	u16 y;
+	u16 hot_x;
+	u16 hot_y;
+	u8	size;
+	u8	display_id;
+	bool	enable;
+	bool	dirty;
+};
+
+struct dc_hw_display {
+	u32 bus_format;
+	u16 h_active;
+	u16 h_total;
+	u16 h_sync_start;

drivers/gpu/drm/verisilicon/vs_dc_hw.h line 517

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.h new file +10 -0
+	u16 h_sync_end;
+	u16 v_active;
+	u16 v_total;
+	u16 v_sync_start;
+	u16 v_sync_end;
+	u8	id;
+	bool	h_sync_polarity;
+	bool	v_sync_polarity;
+	bool	enable;
+};

Your display mode.

Really, you have the huge majority of those informations already available, there's no need to duplicate it. And chances are you'll create bugs in the process.
Maxime

author
#17 lore raw

Re: [v3 4/6] drm/vs: Add KMS crtc&plane

Quoted 237 lines · Maxime Ripard
Quoted 236 lines · Keith Zhao
drivers/gpu/drm/verisilicon/vs_dc.c new file +236 -0
+static const struct vs_plane_info dc_hw_planes_rev0[PLANE_NUM] = {
+	{
+		.name			= "Primary",
+		.id			= PRIMARY_PLANE_0,
+		.type			= DRM_PLANE_TYPE_PRIMARY,
+		.num_formats		= ARRAY_SIZE(primary_overlay_format0),
+		.formats		= primary_overlay_format0,
+		.num_modifiers		= ARRAY_SIZE(format_modifier0),
+		.modifiers		= format_modifier0,
+		.min_width		= 0,
+		.min_height		= 0,
+		.max_width		= 4096,
+		.max_height		= 4096,
+		.rotation		= DRM_MODE_ROTATE_0 |
+					  DRM_MODE_ROTATE_90 |
+					  DRM_MODE_ROTATE_180 |
+					  DRM_MODE_ROTATE_270 |
+					  DRM_MODE_REFLECT_X |
+					  DRM_MODE_REFLECT_Y,
+		.blend_mode		= BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+					  BIT(DRM_MODE_BLEND_PREMULTI) |
+					  BIT(DRM_MODE_BLEND_COVERAGE),
+		.color_encoding		= BIT(DRM_COLOR_YCBCR_BT709) |
+					  BIT(DRM_COLOR_YCBCR_BT2020),
+		.degamma_size		= DEGAMMA_SIZE,
+		.min_scale		= FRAC_16_16(1, 3),
+		.max_scale		= FRAC_16_16(10, 1),
+		.zpos			= 0,
+		.watermark		= true,
+		.color_mgmt		= true,
+		.roi			= true,
+	},
+	{
+		.name			= "Overlay",
+		.id			= OVERLAY_PLANE_0,
+		.type			= DRM_PLANE_TYPE_OVERLAY,
+		.num_formats		= ARRAY_SIZE(primary_overlay_format0),
+		.formats		= primary_overlay_format0,
+		.num_modifiers		= ARRAY_SIZE(format_modifier0),
+		.modifiers		= format_modifier0,
+		.min_width		= 0,
+		.min_height		= 0,
+		.max_width		= 4096,
+		.max_height		= 4096,
+		.rotation		= DRM_MODE_ROTATE_0 |
+					  DRM_MODE_ROTATE_90 |
+					  DRM_MODE_ROTATE_180 |
+					  DRM_MODE_ROTATE_270 |
+					  DRM_MODE_REFLECT_X |
+					  DRM_MODE_REFLECT_Y,
+		.blend_mode		= BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+					  BIT(DRM_MODE_BLEND_PREMULTI) |
+					  BIT(DRM_MODE_BLEND_COVERAGE),
+		.color_encoding		= BIT(DRM_COLOR_YCBCR_BT709) |
+					  BIT(DRM_COLOR_YCBCR_BT2020),
+		.degamma_size		= DEGAMMA_SIZE,
+		.min_scale		= FRAC_16_16(1, 3),
+		.max_scale		= FRAC_16_16(10, 1),
+		.zpos			= 1,
+		.watermark		= true,
+		.color_mgmt		= true,
+		.roi			= true,
+	},
+	{
+		.name			= "Overlay_1",
+		.id			= OVERLAY_PLANE_1,
+		.type			= DRM_PLANE_TYPE_OVERLAY,
+		.num_formats		= ARRAY_SIZE(primary_overlay_format0),
+		.formats		= primary_overlay_format0,
+		.num_modifiers		= ARRAY_SIZE(secondary_format_modifiers),
+		.modifiers		= secondary_format_modifiers,
+		.min_width		= 0,
+		.min_height		= 0,
+		.max_width		= 4096,
+		.max_height		= 4096,
+		.rotation		= 0,
+		.blend_mode		= BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+					  BIT(DRM_MODE_BLEND_PREMULTI) |
+					  BIT(DRM_MODE_BLEND_COVERAGE),
+		.color_encoding		= BIT(DRM_COLOR_YCBCR_BT709) |
+					  BIT(DRM_COLOR_YCBCR_BT2020),
+		.degamma_size		= DEGAMMA_SIZE,
+		.min_scale		= DRM_PLANE_NO_SCALING,
+		.max_scale		= DRM_PLANE_NO_SCALING,
+		.zpos			= 2,
+		.watermark		= true,
+		.color_mgmt		= true,
+		.roi			= true,
+	},
+	{
+		.name			= "Primary_1",
+		.id			= PRIMARY_PLANE_1,
+		.type			= DRM_PLANE_TYPE_PRIMARY,
+		.num_formats		= ARRAY_SIZE(primary_overlay_format0),
+		.formats		= primary_overlay_format0,
+		.num_modifiers		= ARRAY_SIZE(format_modifier0),
+		.modifiers		= format_modifier0,
+		.min_width		= 0,
+		.min_height		= 0,
+		.max_width		= 4096,
+		.max_height		= 4096,
+		.rotation		= DRM_MODE_ROTATE_0 |
+					  DRM_MODE_ROTATE_90 |
+					  DRM_MODE_ROTATE_180 |
+					  DRM_MODE_ROTATE_270 |
+					  DRM_MODE_REFLECT_X |
+					  DRM_MODE_REFLECT_Y,
+		.blend_mode		= BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+					  BIT(DRM_MODE_BLEND_PREMULTI) |
+					  BIT(DRM_MODE_BLEND_COVERAGE),
+		.color_encoding		= BIT(DRM_COLOR_YCBCR_BT709) |
+					  BIT(DRM_COLOR_YCBCR_BT2020),
+		.degamma_size		= DEGAMMA_SIZE,
+		.min_scale		= FRAC_16_16(1, 3),
+		.max_scale		= FRAC_16_16(10, 1),
+		.zpos			= 3,
+		.watermark		= true,
+		.color_mgmt		= true,
+		.roi			= true,
+	},
+	{
+		.name			= "Overlay_2",
+		.id			= OVERLAY_PLANE_2,
+		.type			= DRM_PLANE_TYPE_OVERLAY,
+		.num_formats		= ARRAY_SIZE(primary_overlay_format0),
+		.formats		= primary_overlay_format0,
+		.num_modifiers		= ARRAY_SIZE(format_modifier0),
+		.modifiers		= format_modifier0,
+		.min_width		= 0,
+		.min_height		= 0,
+		.max_width		= 4096,
+		.max_height		= 4096,
+		.rotation		= DRM_MODE_ROTATE_0 |
+					  DRM_MODE_ROTATE_90 |
+					  DRM_MODE_ROTATE_180 |
+					  DRM_MODE_ROTATE_270 |
+					  DRM_MODE_REFLECT_X |
+					  DRM_MODE_REFLECT_Y,
+		.blend_mode		= BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+					  BIT(DRM_MODE_BLEND_PREMULTI) |
+					  BIT(DRM_MODE_BLEND_COVERAGE),
+		.color_encoding		= BIT(DRM_COLOR_YCBCR_BT709) |
+					  BIT(DRM_COLOR_YCBCR_BT2020),
+		.degamma_size		= DEGAMMA_SIZE,
+		.min_scale		= FRAC_16_16(1, 3),
+		.max_scale		= FRAC_16_16(10, 1),
+		.zpos			= 4,
+		.watermark		= true,
+		.color_mgmt		= true,
+		.roi			= true,
+	},
+	{
+		.name			= "Overlay_3",
+		.id			= OVERLAY_PLANE_3,
+		.type			= DRM_PLANE_TYPE_OVERLAY,
+		.num_formats		= ARRAY_SIZE(primary_overlay_format0),
+		.formats		= primary_overlay_format0,
+		.num_modifiers		= ARRAY_SIZE(secondary_format_modifiers),
+		.modifiers		= secondary_format_modifiers,
+		.min_width		= 0,
+		.min_height		= 0,
+		.max_width		= 4096,
+		.max_height		= 4096,
+		.rotation		= 0,
+		.blend_mode		= BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+					  BIT(DRM_MODE_BLEND_PREMULTI) |
+					  BIT(DRM_MODE_BLEND_COVERAGE),
+		.color_encoding		= BIT(DRM_COLOR_YCBCR_BT709) |
+					  BIT(DRM_COLOR_YCBCR_BT2020),
+		.degamma_size		= DEGAMMA_SIZE,
+		.min_scale		= DRM_PLANE_NO_SCALING,
+		.max_scale		= DRM_PLANE_NO_SCALING,
+		.zpos			= 5,
+		.watermark		= true,
+		.color_mgmt		= true,
+		.roi			= true,
+	},
+	{
+		.name			= "Cursor",
+		.id			= CURSOR_PLANE_0,
+		.type			= DRM_PLANE_TYPE_CURSOR,
+		.num_formats		= ARRAY_SIZE(cursor_formats),
+		.formats		= cursor_formats,
+		.num_modifiers		= 0,
+		.modifiers		= NULL,
+		.min_width		= 32,
+		.min_height		= 32,
+		.max_width		= 64,
+		.max_height		= 64,
+		.rotation		= 0,
+		.degamma_size		= 0,
+		.min_scale		= DRM_PLANE_NO_SCALING,
+		.max_scale		= DRM_PLANE_NO_SCALING,
+		.zpos			= 255,
+		.watermark		= false,
+		.color_mgmt		= false,
+		.roi			= false,
+	},
+	{
+		.name			= "Cursor_1",
+		.id			= CURSOR_PLANE_1,
+		.type			= DRM_PLANE_TYPE_CURSOR,
+		.num_formats		= ARRAY_SIZE(cursor_formats),
+		.formats		= cursor_formats,
+		.num_modifiers		= 0,
+		.modifiers		= NULL,
+		.min_width		= 32,
+		.min_height		= 32,
+		.max_width		= 64,
+		.max_height		= 64,
+		.rotation		= 0,
+		.degamma_size		= 0,
+		.min_scale		= DRM_PLANE_NO_SCALING,
+		.max_scale		= DRM_PLANE_NO_SCALING,
+		.zpos			= 255,
+		.watermark		= false,
+		.color_mgmt		= false,
+		.roi			= false,
+	},
+};
+
+static const struct vs_dc_info dc8200_info = {
+	.name			= "DC8200",
+	.panel_num		= 2,
+	.plane_num		= 8,
+	.planes			= dc_hw_planes_rev0,
+	.layer_num		= 6,
+	.max_bpc		= 10,
+	.color_formats		= DRM_COLOR_FORMAT_RGB444 |
+				  DRM_COLOR_FORMAT_YCBCR444 |
+				  DRM_COLOR_FORMAT_YCBCR422 |
+				  DRM_COLOR_FORMAT_YCBCR420,
+	.gamma_size		= GAMMA_EX_SIZE,
+	.gamma_bits		= 12,
+	.pitch_alignment	= 128,
+	.pipe_sync		= false,
Quoted 9 lines

drivers/gpu/drm/verisilicon/vs_dc.c line 349

Quoted 4 lines
drivers/gpu/drm/verisilicon/vs_dc.c new file +4 -0
+	.background		= true,
+	.panel_sync		= true,
+	.cap_dec		= true,
+};

I really think that entire thing is to workaround a suboptimal device tree binding. You should have two CRTCs in the device tree, you'll probe twice, and you won't get to do that whole dance.

i got you means “two CRTCs in the device tree,probe twice" maybe also I can split the common ctrc helper fun into 2 ,

current the driver probe once and map 2 port as ctrc node ,

Quoted 148 lines
Quoted 39 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.h new file +38 -0
+struct dc_hw_plane_reg {
+	u32 y_address;
+	u32 u_address;
+	u32 v_address;
+	u32 y_stride;
+	u32 u_stride;
+	u32 v_stride;
+	u32 size;
+	u32 top_left;
+	u32 bottom_right;
+	u32 scale_factor_x;
+	u32 scale_factor_y;
+	u32 h_filter_coef_index;
+	u32 h_filter_coef_data;
+	u32 v_filter_coef_index;
+	u32 v_filter_coef_data;
+	u32 init_offset;
+	u32 color_key;
+	u32 color_key_high;
+	u32 clear_value;
+	u32 color_table_index;
+	u32 color_table_data;
+	u32 scale_config;
+	u32 water_mark;
+	u32 degamma_index;
+	u32 degamma_data;
+	u32 degamma_ex_data;
+	u32 src_global_color;
+	u32 dst_global_color;
+	u32 blend_config;
+	u32 roi_origin;
+	u32 roi_size;
+	u32 yuv_to_rgb_coef0;
+	u32 yuv_to_rgb_coef1;
+	u32 yuv_to_rgb_coef2;
+	u32 yuv_to_rgb_coef3;
+	u32 yuv_to_rgb_coef4;
+	u32 yuv_to_rgb_coefd0;

drivers/gpu/drm/verisilicon/vs_dc_hw.h line 427

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.h new file +10 -0
+	u32 yuv_to_rgb_coefd1;
+	u32 yuv_to_rgb_coefd2;
+	u32 y_clamp_bound;
+	u32 uv_clamp_bound;
+	u32 rgb_to_rgb_coef0;
+	u32 rgb_to_rgb_coef1;
+	u32 rgb_to_rgb_coef2;
+	u32 rgb_to_rgb_coef3;
+	u32 rgb_to_rgb_coef4;
+};

That's your plane state.

Quoted 14 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.h new file +14 -0
+struct dc_hw_fb {
+	u32 y_address;
+	u32 u_address;
+	u32 v_address;
+	u32 clear_value;
+	u32 water_mark;
+	u16 y_stride;
+	u16 u_stride;
+	u16 v_stride;
+	u16 width;
+	u16 height;
+	u8	format;
+	u8	tile_mode;
+	u8	rotation;

drivers/gpu/drm/verisilicon/vs_dc_hw.h line 452

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.h new file +10 -0
+	u8	yuv_color_space;
+	u8	swizzle;
+	u8	uv_swizzle;
+	u8	zpos;
+	u8	display_id;
+	bool	clear_enable;
+	bool	dec_enable;
+	bool	enable;
+	bool	dirty;
+};

Your framebuffer

Quoted 17 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.h new file +17 -0
+struct dc_hw_scale {
+	u32 scale_factor_x;
+	u32 scale_factor_y;
+	bool	enable;
+	bool	dirty;
+};
+
+struct dc_hw_position {
+	u16 start_x;
+	u16 start_y;
+	u16 end_x;
+	u16 end_y;
+	bool	dirty;
+};
+
+struct dc_hw_blend {
+	u8	alpha;

drivers/gpu/drm/verisilicon/vs_dc_hw.h line 480

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.h new file +10 -0
+	u8	blend_mode;
+	bool	dirty;
+};
+
+struct dc_hw_colorkey {
+	u32 colorkey;
+	u32 colorkey_high;
+	u8	transparency;
+	bool dirty;
+};

Your CRTC state.

Quoted 26 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.h new file +26 -0
+struct dc_hw_roi {
+	u16 x;
+	u16 y;
+	u16 width;
+	u16 height;
+	bool enable;
+	bool dirty;
+};
+
+struct dc_hw_cursor {
+	u32 address;
+	u16 x;
+	u16 y;
+	u16 hot_x;
+	u16 hot_y;
+	u8	size;
+	u8	display_id;
+	bool	enable;
+	bool	dirty;
+};
+
+struct dc_hw_display {
+	u32 bus_format;
+	u16 h_active;
+	u16 h_total;
+	u16 h_sync_start;

drivers/gpu/drm/verisilicon/vs_dc_hw.h line 517

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.h new file +10 -0
+	u16 h_sync_end;
+	u16 v_active;
+	u16 v_total;
+	u16 v_sync_start;
+	u16 v_sync_end;
+	u8	id;
+	bool	h_sync_polarity;
+	bool	v_sync_polarity;
+	bool	enable;
+};

Your display mode.

Quoted 4 lines

Really, you have the huge majority of those informations already available, there's no need to duplicate it. And chances are you'll create bugs in the process.
Maxime

ok let me try it,
This will be another relatively big change.

author
#18 lore raw

回复: [v3 4/6] drm/vs: Add KMS crtc&plane

In reply to Maxime Ripard
Quoted 255 lines

-----邮件原件-----
发件人: Maxime Ripard <[email protected]>
发送时间: 2023年12月6日 16:56
收件人: Keith Zhao <[email protected]>
抄送: [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; William Qiu <[email protected]>; Xingyu Wu <[email protected]>; [email protected]; [email protected]; [email protected]; [email protected]; Shengyang Chen <[email protected]>; Jack Zhu <[email protected]>; Changhuang Liang <[email protected]>; [email protected]; [email protected]
主题: Re: [v3 4/6] drm/vs: Add KMS crtc&plane

Quoted 236 lines · Keith Zhao
drivers/gpu/drm/verisilicon/vs_dc.c new file +236 -0
+static const struct vs_plane_info dc_hw_planes_rev0[PLANE_NUM] = {
+	{
+		.name			= "Primary",
+		.id			= PRIMARY_PLANE_0,
+		.type			= DRM_PLANE_TYPE_PRIMARY,
+		.num_formats		= ARRAY_SIZE(primary_overlay_format0),
+		.formats		= primary_overlay_format0,
+		.num_modifiers		= ARRAY_SIZE(format_modifier0),
+		.modifiers		= format_modifier0,
+		.min_width		= 0,
+		.min_height		= 0,
+		.max_width		= 4096,
+		.max_height		= 4096,
+		.rotation		= DRM_MODE_ROTATE_0 |
+					  DRM_MODE_ROTATE_90 |
+					  DRM_MODE_ROTATE_180 |
+					  DRM_MODE_ROTATE_270 |
+					  DRM_MODE_REFLECT_X |
+					  DRM_MODE_REFLECT_Y,
+		.blend_mode		= BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+					  BIT(DRM_MODE_BLEND_PREMULTI) |
+					  BIT(DRM_MODE_BLEND_COVERAGE),
+		.color_encoding		= BIT(DRM_COLOR_YCBCR_BT709) |
+					  BIT(DRM_COLOR_YCBCR_BT2020),
+		.degamma_size		= DEGAMMA_SIZE,
+		.min_scale		= FRAC_16_16(1, 3),
+		.max_scale		= FRAC_16_16(10, 1),
+		.zpos			= 0,
+		.watermark		= true,
+		.color_mgmt		= true,
+		.roi			= true,
+	},
+	{
+		.name			= "Overlay",
+		.id			= OVERLAY_PLANE_0,
+		.type			= DRM_PLANE_TYPE_OVERLAY,
+		.num_formats		= ARRAY_SIZE(primary_overlay_format0),
+		.formats		= primary_overlay_format0,
+		.num_modifiers		= ARRAY_SIZE(format_modifier0),
+		.modifiers		= format_modifier0,
+		.min_width		= 0,
+		.min_height		= 0,
+		.max_width		= 4096,
+		.max_height		= 4096,
+		.rotation		= DRM_MODE_ROTATE_0 |
+					  DRM_MODE_ROTATE_90 |
+					  DRM_MODE_ROTATE_180 |
+					  DRM_MODE_ROTATE_270 |
+					  DRM_MODE_REFLECT_X |
+					  DRM_MODE_REFLECT_Y,
+		.blend_mode		= BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+					  BIT(DRM_MODE_BLEND_PREMULTI) |
+					  BIT(DRM_MODE_BLEND_COVERAGE),
+		.color_encoding		= BIT(DRM_COLOR_YCBCR_BT709) |
+					  BIT(DRM_COLOR_YCBCR_BT2020),
+		.degamma_size		= DEGAMMA_SIZE,
+		.min_scale		= FRAC_16_16(1, 3),
+		.max_scale		= FRAC_16_16(10, 1),
+		.zpos			= 1,
+		.watermark		= true,
+		.color_mgmt		= true,
+		.roi			= true,
+	},
+	{
+		.name			= "Overlay_1",
+		.id			= OVERLAY_PLANE_1,
+		.type			= DRM_PLANE_TYPE_OVERLAY,
+		.num_formats		= ARRAY_SIZE(primary_overlay_format0),
+		.formats		= primary_overlay_format0,
+		.num_modifiers		= ARRAY_SIZE(secondary_format_modifiers),
+		.modifiers		= secondary_format_modifiers,
+		.min_width		= 0,
+		.min_height		= 0,
+		.max_width		= 4096,
+		.max_height		= 4096,
+		.rotation		= 0,
+		.blend_mode		= BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+					  BIT(DRM_MODE_BLEND_PREMULTI) |
+					  BIT(DRM_MODE_BLEND_COVERAGE),
+		.color_encoding		= BIT(DRM_COLOR_YCBCR_BT709) |
+					  BIT(DRM_COLOR_YCBCR_BT2020),
+		.degamma_size		= DEGAMMA_SIZE,
+		.min_scale		= DRM_PLANE_NO_SCALING,
+		.max_scale		= DRM_PLANE_NO_SCALING,
+		.zpos			= 2,
+		.watermark		= true,
+		.color_mgmt		= true,
+		.roi			= true,
+	},
+	{
+		.name			= "Primary_1",
+		.id			= PRIMARY_PLANE_1,
+		.type			= DRM_PLANE_TYPE_PRIMARY,
+		.num_formats		= ARRAY_SIZE(primary_overlay_format0),
+		.formats		= primary_overlay_format0,
+		.num_modifiers		= ARRAY_SIZE(format_modifier0),
+		.modifiers		= format_modifier0,
+		.min_width		= 0,
+		.min_height		= 0,
+		.max_width		= 4096,
+		.max_height		= 4096,
+		.rotation		= DRM_MODE_ROTATE_0 |
+					  DRM_MODE_ROTATE_90 |
+					  DRM_MODE_ROTATE_180 |
+					  DRM_MODE_ROTATE_270 |
+					  DRM_MODE_REFLECT_X |
+					  DRM_MODE_REFLECT_Y,
+		.blend_mode		= BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+					  BIT(DRM_MODE_BLEND_PREMULTI) |
+					  BIT(DRM_MODE_BLEND_COVERAGE),
+		.color_encoding		= BIT(DRM_COLOR_YCBCR_BT709) |
+					  BIT(DRM_COLOR_YCBCR_BT2020),
+		.degamma_size		= DEGAMMA_SIZE,
+		.min_scale		= FRAC_16_16(1, 3),
+		.max_scale		= FRAC_16_16(10, 1),
+		.zpos			= 3,
+		.watermark		= true,
+		.color_mgmt		= true,
+		.roi			= true,
+	},
+	{
+		.name			= "Overlay_2",
+		.id			= OVERLAY_PLANE_2,
+		.type			= DRM_PLANE_TYPE_OVERLAY,
+		.num_formats		= ARRAY_SIZE(primary_overlay_format0),
+		.formats		= primary_overlay_format0,
+		.num_modifiers		= ARRAY_SIZE(format_modifier0),
+		.modifiers		= format_modifier0,
+		.min_width		= 0,
+		.min_height		= 0,
+		.max_width		= 4096,
+		.max_height		= 4096,
+		.rotation		= DRM_MODE_ROTATE_0 |
+					  DRM_MODE_ROTATE_90 |
+					  DRM_MODE_ROTATE_180 |
+					  DRM_MODE_ROTATE_270 |
+					  DRM_MODE_REFLECT_X |
+					  DRM_MODE_REFLECT_Y,
+		.blend_mode		= BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+					  BIT(DRM_MODE_BLEND_PREMULTI) |
+					  BIT(DRM_MODE_BLEND_COVERAGE),
+		.color_encoding		= BIT(DRM_COLOR_YCBCR_BT709) |
+					  BIT(DRM_COLOR_YCBCR_BT2020),
+		.degamma_size		= DEGAMMA_SIZE,
+		.min_scale		= FRAC_16_16(1, 3),
+		.max_scale		= FRAC_16_16(10, 1),
+		.zpos			= 4,
+		.watermark		= true,
+		.color_mgmt		= true,
+		.roi			= true,
+	},
+	{
+		.name			= "Overlay_3",
+		.id			= OVERLAY_PLANE_3,
+		.type			= DRM_PLANE_TYPE_OVERLAY,
+		.num_formats		= ARRAY_SIZE(primary_overlay_format0),
+		.formats		= primary_overlay_format0,
+		.num_modifiers		= ARRAY_SIZE(secondary_format_modifiers),
+		.modifiers		= secondary_format_modifiers,
+		.min_width		= 0,
+		.min_height		= 0,
+		.max_width		= 4096,
+		.max_height		= 4096,
+		.rotation		= 0,
+		.blend_mode		= BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+					  BIT(DRM_MODE_BLEND_PREMULTI) |
+					  BIT(DRM_MODE_BLEND_COVERAGE),
+		.color_encoding		= BIT(DRM_COLOR_YCBCR_BT709) |
+					  BIT(DRM_COLOR_YCBCR_BT2020),
+		.degamma_size		= DEGAMMA_SIZE,
+		.min_scale		= DRM_PLANE_NO_SCALING,
+		.max_scale		= DRM_PLANE_NO_SCALING,
+		.zpos			= 5,
+		.watermark		= true,
+		.color_mgmt		= true,
+		.roi			= true,
+	},
+	{
+		.name			= "Cursor",
+		.id			= CURSOR_PLANE_0,
+		.type			= DRM_PLANE_TYPE_CURSOR,
+		.num_formats		= ARRAY_SIZE(cursor_formats),
+		.formats		= cursor_formats,
+		.num_modifiers		= 0,
+		.modifiers		= NULL,
+		.min_width		= 32,
+		.min_height		= 32,
+		.max_width		= 64,
+		.max_height		= 64,
+		.rotation		= 0,
+		.degamma_size		= 0,
+		.min_scale		= DRM_PLANE_NO_SCALING,
+		.max_scale		= DRM_PLANE_NO_SCALING,
+		.zpos			= 255,
+		.watermark		= false,
+		.color_mgmt		= false,
+		.roi			= false,
+	},
+	{
+		.name			= "Cursor_1",
+		.id			= CURSOR_PLANE_1,
+		.type			= DRM_PLANE_TYPE_CURSOR,
+		.num_formats		= ARRAY_SIZE(cursor_formats),
+		.formats		= cursor_formats,
+		.num_modifiers		= 0,
+		.modifiers		= NULL,
+		.min_width		= 32,
+		.min_height		= 32,
+		.max_width		= 64,
+		.max_height		= 64,
+		.rotation		= 0,
+		.degamma_size		= 0,
+		.min_scale		= DRM_PLANE_NO_SCALING,
+		.max_scale		= DRM_PLANE_NO_SCALING,
+		.zpos			= 255,
+		.watermark		= false,
+		.color_mgmt		= false,
+		.roi			= false,
+	},
+};
+
+static const struct vs_dc_info dc8200_info = {
+	.name			= "DC8200",
+	.panel_num		= 2,
+	.plane_num		= 8,
+	.planes			= dc_hw_planes_rev0,
+	.layer_num		= 6,
+	.max_bpc		= 10,
+	.color_formats		= DRM_COLOR_FORMAT_RGB444 |
+				  DRM_COLOR_FORMAT_YCBCR444 |
+				  DRM_COLOR_FORMAT_YCBCR422 |
+				  DRM_COLOR_FORMAT_YCBCR420,
+	.gamma_size		= GAMMA_EX_SIZE,
+	.gamma_bits		= 12,
+	.pitch_alignment	= 128,
+	.pipe_sync		= false,
Quoted 9 lines

drivers/gpu/drm/verisilicon/vs_dc.c line 349

Quoted 4 lines
drivers/gpu/drm/verisilicon/vs_dc.c new file +4 -0
+	.background		= true,
+	.panel_sync		= true,
+	.cap_dec		= true,
+};

I really think that entire thing is to workaround a suboptimal device tree binding. You should have two CRTCs in the device tree, you'll probe twice, and you won't get to do that whole dance.

Hi Maxime:
I tried to modify it according to this idea Found it too difficult In terms of hardware,
the two crtc designs are too close to separate, and they are even designed into the same reg with different bits representing crtc0 and crtc1. It seems not easy to described the 2 ctrc hardware by 2 device nodes

The idea is to avoid a whole dance
I don't know if I understand correctly about whole dance. Is it means I create 2 ctrc and 8 plane in the dc_bind?

Thanks
Keith

Quoted 152 lines
Quoted 39 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.h new file +38 -0
+struct dc_hw_plane_reg {
+	u32 y_address;
+	u32 u_address;
+	u32 v_address;
+	u32 y_stride;
+	u32 u_stride;
+	u32 v_stride;
+	u32 size;
+	u32 top_left;
+	u32 bottom_right;
+	u32 scale_factor_x;
+	u32 scale_factor_y;
+	u32 h_filter_coef_index;
+	u32 h_filter_coef_data;
+	u32 v_filter_coef_index;
+	u32 v_filter_coef_data;
+	u32 init_offset;
+	u32 color_key;
+	u32 color_key_high;
+	u32 clear_value;
+	u32 color_table_index;
+	u32 color_table_data;
+	u32 scale_config;
+	u32 water_mark;
+	u32 degamma_index;
+	u32 degamma_data;
+	u32 degamma_ex_data;
+	u32 src_global_color;
+	u32 dst_global_color;
+	u32 blend_config;
+	u32 roi_origin;
+	u32 roi_size;
+	u32 yuv_to_rgb_coef0;
+	u32 yuv_to_rgb_coef1;
+	u32 yuv_to_rgb_coef2;
+	u32 yuv_to_rgb_coef3;
+	u32 yuv_to_rgb_coef4;
+	u32 yuv_to_rgb_coefd0;

drivers/gpu/drm/verisilicon/vs_dc_hw.h line 427

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.h new file +10 -0
+	u32 yuv_to_rgb_coefd1;
+	u32 yuv_to_rgb_coefd2;
+	u32 y_clamp_bound;
+	u32 uv_clamp_bound;
+	u32 rgb_to_rgb_coef0;
+	u32 rgb_to_rgb_coef1;
+	u32 rgb_to_rgb_coef2;
+	u32 rgb_to_rgb_coef3;
+	u32 rgb_to_rgb_coef4;
+};

That's your plane state.

Quoted 14 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.h new file +14 -0
+struct dc_hw_fb {
+	u32 y_address;
+	u32 u_address;
+	u32 v_address;
+	u32 clear_value;
+	u32 water_mark;
+	u16 y_stride;
+	u16 u_stride;
+	u16 v_stride;
+	u16 width;
+	u16 height;
+	u8	format;
+	u8	tile_mode;
+	u8	rotation;

drivers/gpu/drm/verisilicon/vs_dc_hw.h line 452

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.h new file +10 -0
+	u8	yuv_color_space;
+	u8	swizzle;
+	u8	uv_swizzle;
+	u8	zpos;
+	u8	display_id;
+	bool	clear_enable;
+	bool	dec_enable;
+	bool	enable;
+	bool	dirty;
+};

Your framebuffer

Quoted 17 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.h new file +17 -0
+struct dc_hw_scale {
+	u32 scale_factor_x;
+	u32 scale_factor_y;
+	bool	enable;
+	bool	dirty;
+};
+
+struct dc_hw_position {
+	u16 start_x;
+	u16 start_y;
+	u16 end_x;
+	u16 end_y;
+	bool	dirty;
+};
+
+struct dc_hw_blend {
+	u8	alpha;

drivers/gpu/drm/verisilicon/vs_dc_hw.h line 480

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.h new file +10 -0
+	u8	blend_mode;
+	bool	dirty;
+};
+
+struct dc_hw_colorkey {
+	u32 colorkey;
+	u32 colorkey_high;
+	u8	transparency;
+	bool dirty;
+};

Your CRTC state.

Quoted 26 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.h new file +26 -0
+struct dc_hw_roi {
+	u16 x;
+	u16 y;
+	u16 width;
+	u16 height;
+	bool enable;
+	bool dirty;
+};
+
+struct dc_hw_cursor {
+	u32 address;
+	u16 x;
+	u16 y;
+	u16 hot_x;
+	u16 hot_y;
+	u8	size;
+	u8	display_id;
+	bool	enable;
+	bool	dirty;
+};
+
+struct dc_hw_display {
+	u32 bus_format;
+	u16 h_active;
+	u16 h_total;
+	u16 h_sync_start;

drivers/gpu/drm/verisilicon/vs_dc_hw.h line 517

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.h new file +10 -0
+	u16 h_sync_end;
+	u16 v_active;
+	u16 v_total;
+	u16 v_sync_start;
+	u16 v_sync_end;
+	u8	id;
+	bool	h_sync_polarity;
+	bool	v_sync_polarity;
+	bool	enable;
+};

Your display mode.

Really, you have the huge majority of those informations already available, there's no need to duplicate it. And chances are you'll create bugs in the process.
Maxime

maintainer
#19 lore raw

Re: 回复: [v3 4/6] drm/vs: Add KMS crtc&plane

Quoted 24 lines · Keith Zhao
Quoted 15 lines
Quoted 15 lines
drivers/gpu/drm/verisilicon/vs_dc.c new file +15 -0
+static const struct vs_dc_info dc8200_info = {
+	.name			= "DC8200",
+	.panel_num		= 2,
+	.plane_num		= 8,
+	.planes			= dc_hw_planes_rev0,
+	.layer_num		= 6,
+	.max_bpc		= 10,
+	.color_formats		= DRM_COLOR_FORMAT_RGB444 |
+				  DRM_COLOR_FORMAT_YCBCR444 |
+				  DRM_COLOR_FORMAT_YCBCR422 |
+				  DRM_COLOR_FORMAT_YCBCR420,
+	.gamma_size		= GAMMA_EX_SIZE,
+	.gamma_bits		= 12,
+	.pitch_alignment	= 128,
+	.pipe_sync		= false,
Quoted 9 lines

drivers/gpu/drm/verisilicon/vs_dc.c line 349

Quoted 4 lines
drivers/gpu/drm/verisilicon/vs_dc.c new file +4 -0
+	.background		= true,
+	.panel_sync		= true,
+	.cap_dec		= true,
+};

I really think that entire thing is to workaround a suboptimal device tree binding. You should have two CRTCs in the device tree, you'll probe twice, and you won't get to do that whole dance.

Quoted 8 lines

Hi Maxime:
I tried to modify it according to this idea Found it too difficult In terms of hardware,
the two crtc designs are too close to separate, and they are even designed into the same reg with different bits representing crtc0 and crtc1. It seems not easy to described the 2 ctrc hardware by 2 device nodes

The idea is to avoid a whole dance
I don't know if I understand correctly about whole dance. Is it means I create 2 ctrc and 8 plane in the dc_bind?

It looks like you just sent the same mail?

Maxime

author
#20 lore raw

PATCH v3 4/6 drm/vs: Add KMS crtc&plane

In reply to Maxime Ripard
Quoted 255 lines

-----邮件原件-----
发件人: Maxime Ripard <[email protected]>
发送时间: 2023年12月6日 16:56
收件人: Keith Zhao <[email protected]>
抄送: [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; William Qiu <[email protected]>; Xingyu Wu <[email protected]>; [email protected]; [email protected]; [email protected]; [email protected]; Shengyang Chen <[email protected]>; Jack Zhu <[email protected]>; Changhuang Liang <[email protected]>; [email protected]; [email protected]
主题: Re: [v3 4/6] drm/vs: Add KMS crtc&plane

Quoted 236 lines · Keith Zhao
drivers/gpu/drm/verisilicon/vs_dc.c new file +236 -0
+static const struct vs_plane_info dc_hw_planes_rev0[PLANE_NUM] = {
+	{
+		.name			= "Primary",
+		.id			= PRIMARY_PLANE_0,
+		.type			= DRM_PLANE_TYPE_PRIMARY,
+		.num_formats		= ARRAY_SIZE(primary_overlay_format0),
+		.formats		= primary_overlay_format0,
+		.num_modifiers		= ARRAY_SIZE(format_modifier0),
+		.modifiers		= format_modifier0,
+		.min_width		= 0,
+		.min_height		= 0,
+		.max_width		= 4096,
+		.max_height		= 4096,
+		.rotation		= DRM_MODE_ROTATE_0 |
+					  DRM_MODE_ROTATE_90 |
+					  DRM_MODE_ROTATE_180 |
+					  DRM_MODE_ROTATE_270 |
+					  DRM_MODE_REFLECT_X |
+					  DRM_MODE_REFLECT_Y,
+		.blend_mode		= BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+					  BIT(DRM_MODE_BLEND_PREMULTI) |
+					  BIT(DRM_MODE_BLEND_COVERAGE),
+		.color_encoding		= BIT(DRM_COLOR_YCBCR_BT709) |
+					  BIT(DRM_COLOR_YCBCR_BT2020),
+		.degamma_size		= DEGAMMA_SIZE,
+		.min_scale		= FRAC_16_16(1, 3),
+		.max_scale		= FRAC_16_16(10, 1),
+		.zpos			= 0,
+		.watermark		= true,
+		.color_mgmt		= true,
+		.roi			= true,
+	},
+	{
+		.name			= "Overlay",
+		.id			= OVERLAY_PLANE_0,
+		.type			= DRM_PLANE_TYPE_OVERLAY,
+		.num_formats		= ARRAY_SIZE(primary_overlay_format0),
+		.formats		= primary_overlay_format0,
+		.num_modifiers		= ARRAY_SIZE(format_modifier0),
+		.modifiers		= format_modifier0,
+		.min_width		= 0,
+		.min_height		= 0,
+		.max_width		= 4096,
+		.max_height		= 4096,
+		.rotation		= DRM_MODE_ROTATE_0 |
+					  DRM_MODE_ROTATE_90 |
+					  DRM_MODE_ROTATE_180 |
+					  DRM_MODE_ROTATE_270 |
+					  DRM_MODE_REFLECT_X |
+					  DRM_MODE_REFLECT_Y,
+		.blend_mode		= BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+					  BIT(DRM_MODE_BLEND_PREMULTI) |
+					  BIT(DRM_MODE_BLEND_COVERAGE),
+		.color_encoding		= BIT(DRM_COLOR_YCBCR_BT709) |
+					  BIT(DRM_COLOR_YCBCR_BT2020),
+		.degamma_size		= DEGAMMA_SIZE,
+		.min_scale		= FRAC_16_16(1, 3),
+		.max_scale		= FRAC_16_16(10, 1),
+		.zpos			= 1,
+		.watermark		= true,
+		.color_mgmt		= true,
+		.roi			= true,
+	},
+	{
+		.name			= "Overlay_1",
+		.id			= OVERLAY_PLANE_1,
+		.type			= DRM_PLANE_TYPE_OVERLAY,
+		.num_formats		= ARRAY_SIZE(primary_overlay_format0),
+		.formats		= primary_overlay_format0,
+		.num_modifiers		= ARRAY_SIZE(secondary_format_modifiers),
+		.modifiers		= secondary_format_modifiers,
+		.min_width		= 0,
+		.min_height		= 0,
+		.max_width		= 4096,
+		.max_height		= 4096,
+		.rotation		= 0,
+		.blend_mode		= BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+					  BIT(DRM_MODE_BLEND_PREMULTI) |
+					  BIT(DRM_MODE_BLEND_COVERAGE),
+		.color_encoding		= BIT(DRM_COLOR_YCBCR_BT709) |
+					  BIT(DRM_COLOR_YCBCR_BT2020),
+		.degamma_size		= DEGAMMA_SIZE,
+		.min_scale		= DRM_PLANE_NO_SCALING,
+		.max_scale		= DRM_PLANE_NO_SCALING,
+		.zpos			= 2,
+		.watermark		= true,
+		.color_mgmt		= true,
+		.roi			= true,
+	},
+	{
+		.name			= "Primary_1",
+		.id			= PRIMARY_PLANE_1,
+		.type			= DRM_PLANE_TYPE_PRIMARY,
+		.num_formats		= ARRAY_SIZE(primary_overlay_format0),
+		.formats		= primary_overlay_format0,
+		.num_modifiers		= ARRAY_SIZE(format_modifier0),
+		.modifiers		= format_modifier0,
+		.min_width		= 0,
+		.min_height		= 0,
+		.max_width		= 4096,
+		.max_height		= 4096,
+		.rotation		= DRM_MODE_ROTATE_0 |
+					  DRM_MODE_ROTATE_90 |
+					  DRM_MODE_ROTATE_180 |
+					  DRM_MODE_ROTATE_270 |
+					  DRM_MODE_REFLECT_X |
+					  DRM_MODE_REFLECT_Y,
+		.blend_mode		= BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+					  BIT(DRM_MODE_BLEND_PREMULTI) |
+					  BIT(DRM_MODE_BLEND_COVERAGE),
+		.color_encoding		= BIT(DRM_COLOR_YCBCR_BT709) |
+					  BIT(DRM_COLOR_YCBCR_BT2020),
+		.degamma_size		= DEGAMMA_SIZE,
+		.min_scale		= FRAC_16_16(1, 3),
+		.max_scale		= FRAC_16_16(10, 1),
+		.zpos			= 3,
+		.watermark		= true,
+		.color_mgmt		= true,
+		.roi			= true,
+	},
+	{
+		.name			= "Overlay_2",
+		.id			= OVERLAY_PLANE_2,
+		.type			= DRM_PLANE_TYPE_OVERLAY,
+		.num_formats		= ARRAY_SIZE(primary_overlay_format0),
+		.formats		= primary_overlay_format0,
+		.num_modifiers		= ARRAY_SIZE(format_modifier0),
+		.modifiers		= format_modifier0,
+		.min_width		= 0,
+		.min_height		= 0,
+		.max_width		= 4096,
+		.max_height		= 4096,
+		.rotation		= DRM_MODE_ROTATE_0 |
+					  DRM_MODE_ROTATE_90 |
+					  DRM_MODE_ROTATE_180 |
+					  DRM_MODE_ROTATE_270 |
+					  DRM_MODE_REFLECT_X |
+					  DRM_MODE_REFLECT_Y,
+		.blend_mode		= BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+					  BIT(DRM_MODE_BLEND_PREMULTI) |
+					  BIT(DRM_MODE_BLEND_COVERAGE),
+		.color_encoding		= BIT(DRM_COLOR_YCBCR_BT709) |
+					  BIT(DRM_COLOR_YCBCR_BT2020),
+		.degamma_size		= DEGAMMA_SIZE,
+		.min_scale		= FRAC_16_16(1, 3),
+		.max_scale		= FRAC_16_16(10, 1),
+		.zpos			= 4,
+		.watermark		= true,
+		.color_mgmt		= true,
+		.roi			= true,
+	},
+	{
+		.name			= "Overlay_3",
+		.id			= OVERLAY_PLANE_3,
+		.type			= DRM_PLANE_TYPE_OVERLAY,
+		.num_formats		= ARRAY_SIZE(primary_overlay_format0),
+		.formats		= primary_overlay_format0,
+		.num_modifiers		= ARRAY_SIZE(secondary_format_modifiers),
+		.modifiers		= secondary_format_modifiers,
+		.min_width		= 0,
+		.min_height		= 0,
+		.max_width		= 4096,
+		.max_height		= 4096,
+		.rotation		= 0,
+		.blend_mode		= BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+					  BIT(DRM_MODE_BLEND_PREMULTI) |
+					  BIT(DRM_MODE_BLEND_COVERAGE),
+		.color_encoding		= BIT(DRM_COLOR_YCBCR_BT709) |
+					  BIT(DRM_COLOR_YCBCR_BT2020),
+		.degamma_size		= DEGAMMA_SIZE,
+		.min_scale		= DRM_PLANE_NO_SCALING,
+		.max_scale		= DRM_PLANE_NO_SCALING,
+		.zpos			= 5,
+		.watermark		= true,
+		.color_mgmt		= true,
+		.roi			= true,
+	},
+	{
+		.name			= "Cursor",
+		.id			= CURSOR_PLANE_0,
+		.type			= DRM_PLANE_TYPE_CURSOR,
+		.num_formats		= ARRAY_SIZE(cursor_formats),
+		.formats		= cursor_formats,
+		.num_modifiers		= 0,
+		.modifiers		= NULL,
+		.min_width		= 32,
+		.min_height		= 32,
+		.max_width		= 64,
+		.max_height		= 64,
+		.rotation		= 0,
+		.degamma_size		= 0,
+		.min_scale		= DRM_PLANE_NO_SCALING,
+		.max_scale		= DRM_PLANE_NO_SCALING,
+		.zpos			= 255,
+		.watermark		= false,
+		.color_mgmt		= false,
+		.roi			= false,
+	},
+	{
+		.name			= "Cursor_1",
+		.id			= CURSOR_PLANE_1,
+		.type			= DRM_PLANE_TYPE_CURSOR,
+		.num_formats		= ARRAY_SIZE(cursor_formats),
+		.formats		= cursor_formats,
+		.num_modifiers		= 0,
+		.modifiers		= NULL,
+		.min_width		= 32,
+		.min_height		= 32,
+		.max_width		= 64,
+		.max_height		= 64,
+		.rotation		= 0,
+		.degamma_size		= 0,
+		.min_scale		= DRM_PLANE_NO_SCALING,
+		.max_scale		= DRM_PLANE_NO_SCALING,
+		.zpos			= 255,
+		.watermark		= false,
+		.color_mgmt		= false,
+		.roi			= false,
+	},
+};
+
+static const struct vs_dc_info dc8200_info = {
+	.name			= "DC8200",
+	.panel_num		= 2,
+	.plane_num		= 8,
+	.planes			= dc_hw_planes_rev0,
+	.layer_num		= 6,
+	.max_bpc		= 10,
+	.color_formats		= DRM_COLOR_FORMAT_RGB444 |
+				  DRM_COLOR_FORMAT_YCBCR444 |
+				  DRM_COLOR_FORMAT_YCBCR422 |
+				  DRM_COLOR_FORMAT_YCBCR420,
+	.gamma_size		= GAMMA_EX_SIZE,
+	.gamma_bits		= 12,
+	.pitch_alignment	= 128,
+	.pipe_sync		= false,
Quoted 9 lines

drivers/gpu/drm/verisilicon/vs_dc.c line 349

Quoted 4 lines
drivers/gpu/drm/verisilicon/vs_dc.c new file +4 -0
+	.background		= true,
+	.panel_sync		= true,
+	.cap_dec		= true,
+};

I really think that entire thing is to workaround a suboptimal device tree binding. You should have two CRTCs in the device tree, you'll probe twice, and you won't get to do that whole dance.

Hi Maxime:
I tried to modify it according to this idea Found it too difficult In terms of hardware, the two crtc designs are too close to separate, and they are even designed into the same reg with different bits representing crtc0 and crtc1. It seems not easy to described the 2 ctrc hardware by 2 device nodes

The idea is to avoid a whole dance
I don't know if I understand correctly about whole dance. Is it means I create 2 ctrc and 8 plane in the dc_bind?

Thanks
Keith

Quoted 152 lines
Quoted 39 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.h new file +38 -0
+struct dc_hw_plane_reg {
+	u32 y_address;
+	u32 u_address;
+	u32 v_address;
+	u32 y_stride;
+	u32 u_stride;
+	u32 v_stride;
+	u32 size;
+	u32 top_left;
+	u32 bottom_right;
+	u32 scale_factor_x;
+	u32 scale_factor_y;
+	u32 h_filter_coef_index;
+	u32 h_filter_coef_data;
+	u32 v_filter_coef_index;
+	u32 v_filter_coef_data;
+	u32 init_offset;
+	u32 color_key;
+	u32 color_key_high;
+	u32 clear_value;
+	u32 color_table_index;
+	u32 color_table_data;
+	u32 scale_config;
+	u32 water_mark;
+	u32 degamma_index;
+	u32 degamma_data;
+	u32 degamma_ex_data;
+	u32 src_global_color;
+	u32 dst_global_color;
+	u32 blend_config;
+	u32 roi_origin;
+	u32 roi_size;
+	u32 yuv_to_rgb_coef0;
+	u32 yuv_to_rgb_coef1;
+	u32 yuv_to_rgb_coef2;
+	u32 yuv_to_rgb_coef3;
+	u32 yuv_to_rgb_coef4;
+	u32 yuv_to_rgb_coefd0;

drivers/gpu/drm/verisilicon/vs_dc_hw.h line 427

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.h new file +10 -0
+	u32 yuv_to_rgb_coefd1;
+	u32 yuv_to_rgb_coefd2;
+	u32 y_clamp_bound;
+	u32 uv_clamp_bound;
+	u32 rgb_to_rgb_coef0;
+	u32 rgb_to_rgb_coef1;
+	u32 rgb_to_rgb_coef2;
+	u32 rgb_to_rgb_coef3;
+	u32 rgb_to_rgb_coef4;
+};

That's your plane state.

Quoted 14 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.h new file +14 -0
+struct dc_hw_fb {
+	u32 y_address;
+	u32 u_address;
+	u32 v_address;
+	u32 clear_value;
+	u32 water_mark;
+	u16 y_stride;
+	u16 u_stride;
+	u16 v_stride;
+	u16 width;
+	u16 height;
+	u8	format;
+	u8	tile_mode;
+	u8	rotation;

drivers/gpu/drm/verisilicon/vs_dc_hw.h line 452

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.h new file +10 -0
+	u8	yuv_color_space;
+	u8	swizzle;
+	u8	uv_swizzle;
+	u8	zpos;
+	u8	display_id;
+	bool	clear_enable;
+	bool	dec_enable;
+	bool	enable;
+	bool	dirty;
+};

Your framebuffer

Quoted 17 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.h new file +17 -0
+struct dc_hw_scale {
+	u32 scale_factor_x;
+	u32 scale_factor_y;
+	bool	enable;
+	bool	dirty;
+};
+
+struct dc_hw_position {
+	u16 start_x;
+	u16 start_y;
+	u16 end_x;
+	u16 end_y;
+	bool	dirty;
+};
+
+struct dc_hw_blend {
+	u8	alpha;

drivers/gpu/drm/verisilicon/vs_dc_hw.h line 480

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.h new file +10 -0
+	u8	blend_mode;
+	bool	dirty;
+};
+
+struct dc_hw_colorkey {
+	u32 colorkey;
+	u32 colorkey_high;
+	u8	transparency;
+	bool dirty;
+};

Your CRTC state.

Quoted 26 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.h new file +26 -0
+struct dc_hw_roi {
+	u16 x;
+	u16 y;
+	u16 width;
+	u16 height;
+	bool enable;
+	bool dirty;
+};
+
+struct dc_hw_cursor {
+	u32 address;
+	u16 x;
+	u16 y;
+	u16 hot_x;
+	u16 hot_y;
+	u8	size;
+	u8	display_id;
+	bool	enable;
+	bool	dirty;
+};
+
+struct dc_hw_display {
+	u32 bus_format;
+	u16 h_active;
+	u16 h_total;
+	u16 h_sync_start;

drivers/gpu/drm/verisilicon/vs_dc_hw.h line 517

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_dc_hw.h new file +10 -0
+	u16 h_sync_end;
+	u16 v_active;
+	u16 v_total;
+	u16 v_sync_start;
+	u16 v_sync_end;
+	u8	id;
+	bool	h_sync_polarity;
+	bool	v_sync_polarity;
+	bool	enable;
+};

Your display mode.

Really, you have the huge majority of those informations already available, there's no need to duplicate it. And chances are you'll create bugs in the process.
Maxime

maintainer
#21 lore raw

Re: [v3 4/6] drm/vs: Add KMS crtc&plane

Quoted 265 lines · Keith Zhao
Quoted 255 lines

-----邮件原件-----
发件人: Maxime Ripard <[email protected]>
发送时间: 2023年12月6日 16:56
收件人: Keith Zhao <[email protected]>
抄送: [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; William Qiu <[email protected]>; Xingyu Wu <[email protected]>; [email protected]; [email protected]; [email protected]; [email protected]; Shengyang Chen <[email protected]>; Jack Zhu <[email protected]>; Changhuang Liang <[email protected]>; [email protected]; [email protected]
主题: Re: [v3 4/6] drm/vs: Add KMS crtc&plane

Quoted 236 lines · Keith Zhao
drivers/gpu/drm/verisilicon/vs_dc.c new file +236 -0
+static const struct vs_plane_info dc_hw_planes_rev0[PLANE_NUM] = {
+	{
+		.name			= "Primary",
+		.id			= PRIMARY_PLANE_0,
+		.type			= DRM_PLANE_TYPE_PRIMARY,
+		.num_formats		= ARRAY_SIZE(primary_overlay_format0),
+		.formats		= primary_overlay_format0,
+		.num_modifiers		= ARRAY_SIZE(format_modifier0),
+		.modifiers		= format_modifier0,
+		.min_width		= 0,
+		.min_height		= 0,
+		.max_width		= 4096,
+		.max_height		= 4096,
+		.rotation		= DRM_MODE_ROTATE_0 |
+					  DRM_MODE_ROTATE_90 |
+					  DRM_MODE_ROTATE_180 |
+					  DRM_MODE_ROTATE_270 |
+					  DRM_MODE_REFLECT_X |
+					  DRM_MODE_REFLECT_Y,
+		.blend_mode		= BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+					  BIT(DRM_MODE_BLEND_PREMULTI) |
+					  BIT(DRM_MODE_BLEND_COVERAGE),
+		.color_encoding		= BIT(DRM_COLOR_YCBCR_BT709) |
+					  BIT(DRM_COLOR_YCBCR_BT2020),
+		.degamma_size		= DEGAMMA_SIZE,
+		.min_scale		= FRAC_16_16(1, 3),
+		.max_scale		= FRAC_16_16(10, 1),
+		.zpos			= 0,
+		.watermark		= true,
+		.color_mgmt		= true,
+		.roi			= true,
+	},
+	{
+		.name			= "Overlay",
+		.id			= OVERLAY_PLANE_0,
+		.type			= DRM_PLANE_TYPE_OVERLAY,
+		.num_formats		= ARRAY_SIZE(primary_overlay_format0),
+		.formats		= primary_overlay_format0,
+		.num_modifiers		= ARRAY_SIZE(format_modifier0),
+		.modifiers		= format_modifier0,
+		.min_width		= 0,
+		.min_height		= 0,
+		.max_width		= 4096,
+		.max_height		= 4096,
+		.rotation		= DRM_MODE_ROTATE_0 |
+					  DRM_MODE_ROTATE_90 |
+					  DRM_MODE_ROTATE_180 |
+					  DRM_MODE_ROTATE_270 |
+					  DRM_MODE_REFLECT_X |
+					  DRM_MODE_REFLECT_Y,
+		.blend_mode		= BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+					  BIT(DRM_MODE_BLEND_PREMULTI) |
+					  BIT(DRM_MODE_BLEND_COVERAGE),
+		.color_encoding		= BIT(DRM_COLOR_YCBCR_BT709) |
+					  BIT(DRM_COLOR_YCBCR_BT2020),
+		.degamma_size		= DEGAMMA_SIZE,
+		.min_scale		= FRAC_16_16(1, 3),
+		.max_scale		= FRAC_16_16(10, 1),
+		.zpos			= 1,
+		.watermark		= true,
+		.color_mgmt		= true,
+		.roi			= true,
+	},
+	{
+		.name			= "Overlay_1",
+		.id			= OVERLAY_PLANE_1,
+		.type			= DRM_PLANE_TYPE_OVERLAY,
+		.num_formats		= ARRAY_SIZE(primary_overlay_format0),
+		.formats		= primary_overlay_format0,
+		.num_modifiers		= ARRAY_SIZE(secondary_format_modifiers),
+		.modifiers		= secondary_format_modifiers,
+		.min_width		= 0,
+		.min_height		= 0,
+		.max_width		= 4096,
+		.max_height		= 4096,
+		.rotation		= 0,
+		.blend_mode		= BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+					  BIT(DRM_MODE_BLEND_PREMULTI) |
+					  BIT(DRM_MODE_BLEND_COVERAGE),
+		.color_encoding		= BIT(DRM_COLOR_YCBCR_BT709) |
+					  BIT(DRM_COLOR_YCBCR_BT2020),
+		.degamma_size		= DEGAMMA_SIZE,
+		.min_scale		= DRM_PLANE_NO_SCALING,
+		.max_scale		= DRM_PLANE_NO_SCALING,
+		.zpos			= 2,
+		.watermark		= true,
+		.color_mgmt		= true,
+		.roi			= true,
+	},
+	{
+		.name			= "Primary_1",
+		.id			= PRIMARY_PLANE_1,
+		.type			= DRM_PLANE_TYPE_PRIMARY,
+		.num_formats		= ARRAY_SIZE(primary_overlay_format0),
+		.formats		= primary_overlay_format0,
+		.num_modifiers		= ARRAY_SIZE(format_modifier0),
+		.modifiers		= format_modifier0,
+		.min_width		= 0,
+		.min_height		= 0,
+		.max_width		= 4096,
+		.max_height		= 4096,
+		.rotation		= DRM_MODE_ROTATE_0 |
+					  DRM_MODE_ROTATE_90 |
+					  DRM_MODE_ROTATE_180 |
+					  DRM_MODE_ROTATE_270 |
+					  DRM_MODE_REFLECT_X |
+					  DRM_MODE_REFLECT_Y,
+		.blend_mode		= BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+					  BIT(DRM_MODE_BLEND_PREMULTI) |
+					  BIT(DRM_MODE_BLEND_COVERAGE),
+		.color_encoding		= BIT(DRM_COLOR_YCBCR_BT709) |
+					  BIT(DRM_COLOR_YCBCR_BT2020),
+		.degamma_size		= DEGAMMA_SIZE,
+		.min_scale		= FRAC_16_16(1, 3),
+		.max_scale		= FRAC_16_16(10, 1),
+		.zpos			= 3,
+		.watermark		= true,
+		.color_mgmt		= true,
+		.roi			= true,
+	},
+	{
+		.name			= "Overlay_2",
+		.id			= OVERLAY_PLANE_2,
+		.type			= DRM_PLANE_TYPE_OVERLAY,
+		.num_formats		= ARRAY_SIZE(primary_overlay_format0),
+		.formats		= primary_overlay_format0,
+		.num_modifiers		= ARRAY_SIZE(format_modifier0),
+		.modifiers		= format_modifier0,
+		.min_width		= 0,
+		.min_height		= 0,
+		.max_width		= 4096,
+		.max_height		= 4096,
+		.rotation		= DRM_MODE_ROTATE_0 |
+					  DRM_MODE_ROTATE_90 |
+					  DRM_MODE_ROTATE_180 |
+					  DRM_MODE_ROTATE_270 |
+					  DRM_MODE_REFLECT_X |
+					  DRM_MODE_REFLECT_Y,
+		.blend_mode		= BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+					  BIT(DRM_MODE_BLEND_PREMULTI) |
+					  BIT(DRM_MODE_BLEND_COVERAGE),
+		.color_encoding		= BIT(DRM_COLOR_YCBCR_BT709) |
+					  BIT(DRM_COLOR_YCBCR_BT2020),
+		.degamma_size		= DEGAMMA_SIZE,
+		.min_scale		= FRAC_16_16(1, 3),
+		.max_scale		= FRAC_16_16(10, 1),
+		.zpos			= 4,
+		.watermark		= true,
+		.color_mgmt		= true,
+		.roi			= true,
+	},
+	{
+		.name			= "Overlay_3",
+		.id			= OVERLAY_PLANE_3,
+		.type			= DRM_PLANE_TYPE_OVERLAY,
+		.num_formats		= ARRAY_SIZE(primary_overlay_format0),
+		.formats		= primary_overlay_format0,
+		.num_modifiers		= ARRAY_SIZE(secondary_format_modifiers),
+		.modifiers		= secondary_format_modifiers,
+		.min_width		= 0,
+		.min_height		= 0,
+		.max_width		= 4096,
+		.max_height		= 4096,
+		.rotation		= 0,
+		.blend_mode		= BIT(DRM_MODE_BLEND_PIXEL_NONE) |
+					  BIT(DRM_MODE_BLEND_PREMULTI) |
+					  BIT(DRM_MODE_BLEND_COVERAGE),
+		.color_encoding		= BIT(DRM_COLOR_YCBCR_BT709) |
+					  BIT(DRM_COLOR_YCBCR_BT2020),
+		.degamma_size		= DEGAMMA_SIZE,
+		.min_scale		= DRM_PLANE_NO_SCALING,
+		.max_scale		= DRM_PLANE_NO_SCALING,
+		.zpos			= 5,
+		.watermark		= true,
+		.color_mgmt		= true,
+		.roi			= true,
+	},
+	{
+		.name			= "Cursor",
+		.id			= CURSOR_PLANE_0,
+		.type			= DRM_PLANE_TYPE_CURSOR,
+		.num_formats		= ARRAY_SIZE(cursor_formats),
+		.formats		= cursor_formats,
+		.num_modifiers		= 0,
+		.modifiers		= NULL,
+		.min_width		= 32,
+		.min_height		= 32,
+		.max_width		= 64,
+		.max_height		= 64,
+		.rotation		= 0,
+		.degamma_size		= 0,
+		.min_scale		= DRM_PLANE_NO_SCALING,
+		.max_scale		= DRM_PLANE_NO_SCALING,
+		.zpos			= 255,
+		.watermark		= false,
+		.color_mgmt		= false,
+		.roi			= false,
+	},
+	{
+		.name			= "Cursor_1",
+		.id			= CURSOR_PLANE_1,
+		.type			= DRM_PLANE_TYPE_CURSOR,
+		.num_formats		= ARRAY_SIZE(cursor_formats),
+		.formats		= cursor_formats,
+		.num_modifiers		= 0,
+		.modifiers		= NULL,
+		.min_width		= 32,
+		.min_height		= 32,
+		.max_width		= 64,
+		.max_height		= 64,
+		.rotation		= 0,
+		.degamma_size		= 0,
+		.min_scale		= DRM_PLANE_NO_SCALING,
+		.max_scale		= DRM_PLANE_NO_SCALING,
+		.zpos			= 255,
+		.watermark		= false,
+		.color_mgmt		= false,
+		.roi			= false,
+	},
+};
+
+static const struct vs_dc_info dc8200_info = {
+	.name			= "DC8200",
+	.panel_num		= 2,
+	.plane_num		= 8,
+	.planes			= dc_hw_planes_rev0,
+	.layer_num		= 6,
+	.max_bpc		= 10,
+	.color_formats		= DRM_COLOR_FORMAT_RGB444 |
+				  DRM_COLOR_FORMAT_YCBCR444 |
+				  DRM_COLOR_FORMAT_YCBCR422 |
+				  DRM_COLOR_FORMAT_YCBCR420,
+	.gamma_size		= GAMMA_EX_SIZE,
+	.gamma_bits		= 12,
+	.pitch_alignment	= 128,
+	.pipe_sync		= false,
Quoted 9 lines

drivers/gpu/drm/verisilicon/vs_dc.c line 349

Quoted 4 lines
drivers/gpu/drm/verisilicon/vs_dc.c new file +4 -0
+	.background		= true,
+	.panel_sync		= true,
+	.cap_dec		= true,
+};

I really think that entire thing is to workaround a suboptimal device tree binding. You should have two CRTCs in the device tree, you'll probe twice, and you won't get to do that whole dance.

Quoted 5 lines

I tried to modify it according to this idea Found it too difficult In terms of hardware, the two crtc designs are too close to separate, and they are even designed into the same reg with different bits representing crtc0 and crtc1. It seems not easy to described the 2 ctrc hardware by 2 device nodes

What are these bits doing?

Quoted 3 lines

The idea is to avoid a whole dance I don't know if I understand correctly about whole dance. Is it means I create 2 ctrc and 8 plane in the dc_bind?

Yeah, you should strive to make it two separate devices.

Maxime

author
#22 lore raw

RE: [v3 4/6] drm/vs: Add KMS crtc&plane

Quoted 582 lines

-----Original Message-----

From: Maxime Ripard <[email protected]>

Sent: 2024年1月31日 21:24

To: Keith Zhao <[email protected]>

[email protected]; [email protected];

[email protected]; [email protected]; [email protected];

William Qiu <[email protected]>; Xingyu Wu

<[email protected]>; [email protected];

[email protected]; [email protected]; [email protected];

Shengyang Chen <[email protected]>; Jack Zhu

<[email protected]>; Changhuang Liang

<[email protected]>; [email protected]

Subject: Re: [v3 4/6] drm/vs: Add KMS crtc&plane

Quoted 174 lines · Keith Zhao
Quoted 173 lines

-----邮件原件-----

发件人: Maxime Ripard <[email protected]<mailto:[email protected]>>

发送时间: 2023年12月6日 16:56

收件人: Keith Zhao <[email protected]<mailto:[email protected]>>

抄送: [email protected]<mailto:[email protected]>; [email protected]<mailto:[email protected]>;

[email protected]<mailto:[email protected]>; [email protected]<mailto:[email protected]>;

[email protected]<mailto:[email protected]>; [email protected]<mailto:[email protected]>;

[email protected]<mailto:[email protected]>;

William Qiu <[email protected]<mailto:[email protected]>>; Xingyu Wu

<[email protected]<mailto:[email protected]>>; [email protected]<mailto:[email protected]>;

[email protected]<mailto:[email protected]>; [email protected]<mailto:[email protected]>; [email protected]<mailto:[email protected]>;

Shengyang Chen <[email protected]<mailto:[email protected]>>; Jack Zhu

<[email protected]<mailto:[email protected]>>; Changhuang Liang

<[email protected]<mailto:[email protected]>>;

[email protected]<mailto:[email protected]>;

[email protected]<mailto:[email protected]>

主题: Re: [v3 4/6] drm/vs: Add KMS crtc&plane

Quoted 131 lines · Keith Zhao
drivers/gpu/drm/verisilicon/vs_dc.c new file +66 -0
+static const struct vs_plane_info dc_hw_planes_rev0[PLANE_NUM] = {
 
+   {
 
+            .name                         = "Primary",
 
+            .id                       = PRIMARY_PLANE_0,
 
+            .type                            = DRM_PLANE_TYPE_PRIMARY,
 
+            .num_formats           = ARRAY_SIZE(primary_overlay_format0),
 
+            .formats            = primary_overlay_format0,
 
+            .num_modifiers                 = ARRAY_SIZE(format_modifier0),
 
+            .modifiers                   = format_modifier0,
 
+            .min_width                = 0,
 
+            .min_height               = 0,
 
+            .max_width               = 4096,
 
+            .max_height              = 4096,
 
+            .rotation           = DRM_MODE_ROTATE_0 |
 
+                                          DRM_MODE_ROTATE_90 |
 
+                                          DRM_MODE_ROTATE_180 |
 
+                                          DRM_MODE_ROTATE_270 |
 
+                                          DRM_MODE_REFLECT_X |
 
+                                          DRM_MODE_REFLECT_Y,
 
+            .blend_mode             = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
 
+                                          BIT(DRM_MODE_BLEND_PREMULTI) |
 
+                                          BIT(DRM_MODE_BLEND_COVERAGE),
 
+            .color_encoding                 = BIT(DRM_COLOR_YCBCR_BT709) |
 
+                                          BIT(DRM_COLOR_YCBCR_BT2020),
 
+            .degamma_size                  = DEGAMMA_SIZE,
 
+            .min_scale                 = FRAC_16_16(1, 3),
 
+            .max_scale                = FRAC_16_16(10, 1),
 
+            .zpos                            = 0,
 
+            .watermark               = true,
 
+            .color_mgmt             = true,
 
+            .roi                      = true,
 
+   },
 
+   {
 
+            .name                         = "Overlay",
 
+            .id                       = OVERLAY_PLANE_0,
 
+            .type                            = DRM_PLANE_TYPE_OVERLAY,
 
+            .num_formats           = ARRAY_SIZE(primary_overlay_format0),
 
+            .formats            = primary_overlay_format0,
 
+            .num_modifiers                 = ARRAY_SIZE(format_modifier0),
 
+            .modifiers                   = format_modifier0,
 
+            .min_width                = 0,
 
+            .min_height               = 0,
 
+            .max_width               = 4096,
 
+            .max_height              = 4096,
 
+            .rotation           = DRM_MODE_ROTATE_0 |
 
+                                          DRM_MODE_ROTATE_90 |
 
+                                          DRM_MODE_ROTATE_180 |
 
+                                          DRM_MODE_ROTATE_270 |
 
+                                          DRM_MODE_REFLECT_X |
 
+                                          DRM_MODE_REFLECT_Y,
 
+            .blend_mode             = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
 
+                                          BIT(DRM_MODE_BLEND_PREMULTI) |
 
+                                          BIT(DRM_MODE_BLEND_COVERAGE),
 
+            .color_encoding                 = BIT(DRM_COLOR_YCBCR_BT709) |
 
+                                          BIT(DRM_COLOR_YCBCR_BT2020),
 
+            .degamma_size                  = DEGAMMA_SIZE,
 
+            .min_scale                 = FRAC_16_16(1, 3),
 
+            .max_scale                = FRAC_16_16(10, 1),
 
+            .zpos                            = 1,
 
+            .watermark               = true,
 
+            .color_mgmt             = true,
 
+            .roi                      = true,
 
+   },
 
+   {
 
+            .name                         = "Overlay_1",
 
+            .id                       = OVERLAY_PLANE_1,
Quoted 7 lines
Quoted 7 lines

Review

Quoted 7 lines
(quoted diff) +4 -0
+            .type                            = DRM_PLANE_TYPE_OVERLAY,
 
+            .num_formats           = ARRAY_SIZE(primary_overlay_format0),
 
+            .formats            = primary_overlay_format0,
 
+            .num_modifiers                 =

ARRAY_SIZE(secondary_format_modifiers),

Quoted 168 lines
Quoted 167 lines
Quoted 167 lines
drivers/gpu/drm/verisilicon/vs_dc.c new file +84 -0
+            .modifiers                   = secondary_format_modifiers,
 
+            .min_width                = 0,
 
+            .min_height               = 0,
 
+            .max_width               = 4096,
 
+            .max_height              = 4096,
 
+            .rotation           = 0,
 
+            .blend_mode             = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
 
+                                          BIT(DRM_MODE_BLEND_PREMULTI) |
 
+                                          BIT(DRM_MODE_BLEND_COVERAGE),
 
+            .color_encoding                 = BIT(DRM_COLOR_YCBCR_BT709) |
 
+                                          BIT(DRM_COLOR_YCBCR_BT2020),
 
+            .degamma_size                  = DEGAMMA_SIZE,
 
+            .min_scale                 = DRM_PLANE_NO_SCALING,
 
+            .max_scale                = DRM_PLANE_NO_SCALING,
 
+            .zpos                            = 2,
 
+            .watermark               = true,
 
+            .color_mgmt             = true,
 
+            .roi                      = true,
 
+   },
 
+   {
 
+            .name                         = "Primary_1",
 
+            .id                       = PRIMARY_PLANE_1,
 
+            .type                            = DRM_PLANE_TYPE_PRIMARY,
 
+            .num_formats           = ARRAY_SIZE(primary_overlay_format0),
 
+            .formats            = primary_overlay_format0,
 
+            .num_modifiers                 = ARRAY_SIZE(format_modifier0),
 
+            .modifiers                   = format_modifier0,
 
+            .min_width                = 0,
 
+            .min_height               = 0,
 
+            .max_width               = 4096,
 
+            .max_height              = 4096,
 
+            .rotation           = DRM_MODE_ROTATE_0 |
 
+                                          DRM_MODE_ROTATE_90 |
 
+                                          DRM_MODE_ROTATE_180 |
 
+                                          DRM_MODE_ROTATE_270 |
 
+                                          DRM_MODE_REFLECT_X |
 
+                                          DRM_MODE_REFLECT_Y,
 
+            .blend_mode             = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
 
+                                          BIT(DRM_MODE_BLEND_PREMULTI) |
 
+                                          BIT(DRM_MODE_BLEND_COVERAGE),
 
+            .color_encoding                 = BIT(DRM_COLOR_YCBCR_BT709) |
 
+                                          BIT(DRM_COLOR_YCBCR_BT2020),
 
+            .degamma_size                  = DEGAMMA_SIZE,
 
+            .min_scale                 = FRAC_16_16(1, 3),
 
+            .max_scale                = FRAC_16_16(10, 1),
 
+            .zpos                            = 3,
 
+            .watermark               = true,
 
+            .color_mgmt             = true,
 
+            .roi                      = true,
 
+   },
 
+   {
 
+            .name                         = "Overlay_2",
 
+            .id                       = OVERLAY_PLANE_2,
 
+            .type                            = DRM_PLANE_TYPE_OVERLAY,
 
+            .num_formats           = ARRAY_SIZE(primary_overlay_format0),
 
+            .formats            = primary_overlay_format0,
 
+            .num_modifiers                 = ARRAY_SIZE(format_modifier0),
 
+            .modifiers                   = format_modifier0,
 
+            .min_width                = 0,
 
+            .min_height               = 0,
 
+            .max_width               = 4096,
 
+            .max_height              = 4096,
 
+            .rotation           = DRM_MODE_ROTATE_0 |
 
+                                          DRM_MODE_ROTATE_90 |
 
+                                          DRM_MODE_ROTATE_180 |
 
+                                          DRM_MODE_ROTATE_270 |
 
+                                          DRM_MODE_REFLECT_X |
 
+                                          DRM_MODE_REFLECT_Y,
 
+            .blend_mode             = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
 
+                                          BIT(DRM_MODE_BLEND_PREMULTI) |
 
+                                          BIT(DRM_MODE_BLEND_COVERAGE),
 
+            .color_encoding                 = BIT(DRM_COLOR_YCBCR_BT709) |
 
+                                          BIT(DRM_COLOR_YCBCR_BT2020),
 
+            .degamma_size                  = DEGAMMA_SIZE,
 
+            .min_scale                 = FRAC_16_16(1, 3),
 
+            .max_scale                = FRAC_16_16(10, 1),
 
+            .zpos                            = 4,
 
+            .watermark               = true,
 
+            .color_mgmt             = true,
 
+            .roi                      = true,
 
+   },
 
+   {
 
+            .name                         = "Overlay_3",
 
+            .id                       = OVERLAY_PLANE_3,
Quoted 7 lines
Quoted 7 lines

Review

Quoted 7 lines
(quoted diff) +4 -0
+            .type                            = DRM_PLANE_TYPE_OVERLAY,
 
+            .num_formats           = ARRAY_SIZE(primary_overlay_format0),
 
+            .formats            = primary_overlay_format0,
 
+            .num_modifiers                 =

ARRAY_SIZE(secondary_format_modifiers),

Quoted 160 lines
Quoted 159 lines
Quoted 159 lines
drivers/gpu/drm/verisilicon/vs_dc.c new file +80 -0
+            .modifiers                   = secondary_format_modifiers,
 
+            .min_width                = 0,
 
+            .min_height               = 0,
 
+            .max_width               = 4096,
 
+            .max_height              = 4096,
 
+            .rotation           = 0,
 
+            .blend_mode             = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
 
+                                          BIT(DRM_MODE_BLEND_PREMULTI) |
 
+                                          BIT(DRM_MODE_BLEND_COVERAGE),
 
+            .color_encoding                 = BIT(DRM_COLOR_YCBCR_BT709) |
 
+                                          BIT(DRM_COLOR_YCBCR_BT2020),
 
+            .degamma_size                  = DEGAMMA_SIZE,
 
+            .min_scale                 = DRM_PLANE_NO_SCALING,
 
+            .max_scale                = DRM_PLANE_NO_SCALING,
 
+            .zpos                            = 5,
 
+            .watermark               = true,
 
+            .color_mgmt             = true,
 
+            .roi                      = true,
 
+   },
 
+   {
 
+            .name                         = "Cursor",
 
+            .id                       = CURSOR_PLANE_0,
 
+            .type                            = DRM_PLANE_TYPE_CURSOR,
 
+            .num_formats           = ARRAY_SIZE(cursor_formats),
 
+            .formats            = cursor_formats,
 
+            .num_modifiers                 = 0,
 
+            .modifiers                   = NULL,
 
+            .min_width                = 32,
 
+            .min_height               = 32,
 
+            .max_width               = 64,
 
+            .max_height              = 64,
 
+            .rotation           = 0,
 
+            .degamma_size                  = 0,
 
+            .min_scale                 = DRM_PLANE_NO_SCALING,
 
+            .max_scale                = DRM_PLANE_NO_SCALING,
 
+            .zpos                            = 255,
 
+            .watermark               = false,
 
+            .color_mgmt             = false,
 
+            .roi                      = false,
 
+   },
 
+   {
 
+            .name                         = "Cursor_1",
 
+            .id                       = CURSOR_PLANE_1,
 
+            .type                            = DRM_PLANE_TYPE_CURSOR,
 
+            .num_formats           = ARRAY_SIZE(cursor_formats),
 
+            .formats            = cursor_formats,
 
+            .num_modifiers                 = 0,
 
+            .modifiers                   = NULL,
 
+            .min_width                = 32,
 
+            .min_height               = 32,
 
+            .max_width               = 64,
 
+            .max_height              = 64,
 
+            .rotation           = 0,
 
+            .degamma_size                  = 0,
 
+            .min_scale                 = DRM_PLANE_NO_SCALING,
 
+            .max_scale                = DRM_PLANE_NO_SCALING,
 
+            .zpos                            = 255,
 
+            .watermark               = false,
 
+            .color_mgmt             = false,
 
+            .roi                      = false,
 
+   },
 
+};
 
+
 
+static const struct vs_dc_info dc8200_info = {
 
+   .name                         = "DC8200",
 
+   .panel_num               = 2,
 
+   .plane_num               = 8,
 
+   .planes                        = dc_hw_planes_rev0,
 
+   .layer_num                = 6,
 
+   .max_bpc          = 10,
 
+   .color_formats          = DRM_COLOR_FORMAT_RGB444 |
 
+                                 DRM_COLOR_FORMAT_YCBCR444 |
 
+                                 DRM_COLOR_FORMAT_YCBCR422 |
 
+                                 DRM_COLOR_FORMAT_YCBCR420,
 
+   .gamma_size             = GAMMA_EX_SIZE,
 
+   .gamma_bits             = 12,
 
+   .pitch_alignment     = 128,
 
+   .pipe_sync                  = false,
 
+   .background              = true,
 
+   .panel_sync               = true,
Quoted 7 lines
Quoted 7 lines

drivers/gpu/drm/verisilicon/vs_dc.c line 349

Quoted 3 lines
drivers/gpu/drm/verisilicon/vs_dc.c new file +2 -0
+   .cap_dec           = true,
 
+};

I really think that entire thing is to workaround a suboptimal device tree

binding.

Quoted 13 lines
Quoted 5 lines

You should have two CRTCs in the device tree, you'll probe twice,

and you won't get to do that whole dance.

I tried to modify it according to this idea Found it too difficult In

terms of hardware, the two crtc designs are too close to separate, and

they are even designed into the same reg with different bits

Quoted 7 lines
Quoted 3 lines

representing crtc0 and crtc1. It seems not easy to described the 2

ctrc hardware by 2 device nodes

What are these bits doing?

[cid:[email protected]]

For example:

like this , bit0 and bit1 match ctrc0 and crtc1 , it is used to start crtc

A similar situation exists for other register definitions.

Another case is that ctrc0 and crtc1 have the same function and their offset is continuous,

instead of crtc0 being a continuous area, crtc1 being a continuous area

reg:

crtc0 X

crtc1 X+4

crtc0 X+8

crtc1 X+12

if to make it two separate devices, the device node dts reg attribute would be complex

Quoted 15 lines
Quoted 7 lines

The idea is to avoid a whole dance I don't know if I understand

correctly about whole dance. Is it means I create 2 ctrc and 8 plane

in the dc_bind?

Yeah, you should strive to make it two separate devices.

Maxime

maintainer
#23 lore raw

Re: RE: [v3 4/6] drm/vs: Add KMS crtc&plane

Quoted 610 lines · Keith Zhao
Quoted 582 lines

-----Original Message-----

From: Maxime Ripard <[email protected]>

Sent: 2024年1月31日 21:24

To: Keith Zhao <[email protected]>

[email protected]; [email protected];

[email protected]; [email protected]; [email protected];

William Qiu <[email protected]>; Xingyu Wu

<[email protected]>; [email protected];

[email protected]; [email protected]; [email protected];

Shengyang Chen <[email protected]>; Jack Zhu

<[email protected]>; Changhuang Liang

<[email protected]>; [email protected]

Subject: Re: [v3 4/6] drm/vs: Add KMS crtc&plane

Quoted 174 lines · Keith Zhao
Quoted 173 lines

-----邮件原件-----

发件人: Maxime Ripard <[email protected]<mailto:[email protected]>>

发送时间: 2023年12月6日 16:56

收件人: Keith Zhao <[email protected]<mailto:[email protected]>>

抄送: [email protected]<mailto:[email protected]>; [email protected]<mailto:[email protected]>;

[email protected]<mailto:[email protected]>; [email protected]<mailto:[email protected]>;

[email protected]<mailto:[email protected]>; [email protected]<mailto:[email protected]>;

[email protected]<mailto:[email protected]>;

William Qiu <[email protected]<mailto:[email protected]>>; Xingyu Wu

<[email protected]<mailto:[email protected]>>; [email protected]<mailto:[email protected]>;

[email protected]<mailto:[email protected]>; [email protected]<mailto:[email protected]>; [email protected]<mailto:[email protected]>;

Shengyang Chen <[email protected]<mailto:[email protected]>>; Jack Zhu

<[email protected]<mailto:[email protected]>>; Changhuang Liang

<[email protected]<mailto:[email protected]>>;

[email protected]<mailto:[email protected]>;

[email protected]<mailto:[email protected]>

主题: Re: [v3 4/6] drm/vs: Add KMS crtc&plane

Quoted 131 lines · Keith Zhao
drivers/gpu/drm/verisilicon/vs_dc.c new file +66 -0
+static const struct vs_plane_info dc_hw_planes_rev0[PLANE_NUM] = {
 
+   {
 
+            .name                         = "Primary",
 
+            .id                       = PRIMARY_PLANE_0,
 
+            .type                            = DRM_PLANE_TYPE_PRIMARY,
 
+            .num_formats           = ARRAY_SIZE(primary_overlay_format0),
 
+            .formats            = primary_overlay_format0,
 
+            .num_modifiers                 = ARRAY_SIZE(format_modifier0),
 
+            .modifiers                   = format_modifier0,
 
+            .min_width                = 0,
 
+            .min_height               = 0,
 
+            .max_width               = 4096,
 
+            .max_height              = 4096,
 
+            .rotation           = DRM_MODE_ROTATE_0 |
 
+                                          DRM_MODE_ROTATE_90 |
 
+                                          DRM_MODE_ROTATE_180 |
 
+                                          DRM_MODE_ROTATE_270 |
 
+                                          DRM_MODE_REFLECT_X |
 
+                                          DRM_MODE_REFLECT_Y,
 
+            .blend_mode             = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
 
+                                          BIT(DRM_MODE_BLEND_PREMULTI) |
 
+                                          BIT(DRM_MODE_BLEND_COVERAGE),
 
+            .color_encoding                 = BIT(DRM_COLOR_YCBCR_BT709) |
 
+                                          BIT(DRM_COLOR_YCBCR_BT2020),
 
+            .degamma_size                  = DEGAMMA_SIZE,
 
+            .min_scale                 = FRAC_16_16(1, 3),
 
+            .max_scale                = FRAC_16_16(10, 1),
 
+            .zpos                            = 0,
 
+            .watermark               = true,
 
+            .color_mgmt             = true,
 
+            .roi                      = true,
 
+   },
 
+   {
 
+            .name                         = "Overlay",
 
+            .id                       = OVERLAY_PLANE_0,
 
+            .type                            = DRM_PLANE_TYPE_OVERLAY,
 
+            .num_formats           = ARRAY_SIZE(primary_overlay_format0),
 
+            .formats            = primary_overlay_format0,
 
+            .num_modifiers                 = ARRAY_SIZE(format_modifier0),
 
+            .modifiers                   = format_modifier0,
 
+            .min_width                = 0,
 
+            .min_height               = 0,
 
+            .max_width               = 4096,
 
+            .max_height              = 4096,
 
+            .rotation           = DRM_MODE_ROTATE_0 |
 
+                                          DRM_MODE_ROTATE_90 |
 
+                                          DRM_MODE_ROTATE_180 |
 
+                                          DRM_MODE_ROTATE_270 |
 
+                                          DRM_MODE_REFLECT_X |
 
+                                          DRM_MODE_REFLECT_Y,
 
+            .blend_mode             = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
 
+                                          BIT(DRM_MODE_BLEND_PREMULTI) |
 
+                                          BIT(DRM_MODE_BLEND_COVERAGE),
 
+            .color_encoding                 = BIT(DRM_COLOR_YCBCR_BT709) |
 
+                                          BIT(DRM_COLOR_YCBCR_BT2020),
 
+            .degamma_size                  = DEGAMMA_SIZE,
 
+            .min_scale                 = FRAC_16_16(1, 3),
 
+            .max_scale                = FRAC_16_16(10, 1),
 
+            .zpos                            = 1,
 
+            .watermark               = true,
 
+            .color_mgmt             = true,
 
+            .roi                      = true,
 
+   },
 
+   {
 
+            .name                         = "Overlay_1",
 
+            .id                       = OVERLAY_PLANE_1,
Quoted 7 lines
Quoted 7 lines

Review

Quoted 7 lines
(quoted diff) +4 -0
+            .type                            = DRM_PLANE_TYPE_OVERLAY,
 
+            .num_formats           = ARRAY_SIZE(primary_overlay_format0),
 
+            .formats            = primary_overlay_format0,
 
+            .num_modifiers                 =

ARRAY_SIZE(secondary_format_modifiers),

Quoted 168 lines
Quoted 167 lines
Quoted 167 lines
drivers/gpu/drm/verisilicon/vs_dc.c new file +84 -0
+            .modifiers                   = secondary_format_modifiers,
 
+            .min_width                = 0,
 
+            .min_height               = 0,
 
+            .max_width               = 4096,
 
+            .max_height              = 4096,
 
+            .rotation           = 0,
 
+            .blend_mode             = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
 
+                                          BIT(DRM_MODE_BLEND_PREMULTI) |
 
+                                          BIT(DRM_MODE_BLEND_COVERAGE),
 
+            .color_encoding                 = BIT(DRM_COLOR_YCBCR_BT709) |
 
+                                          BIT(DRM_COLOR_YCBCR_BT2020),
 
+            .degamma_size                  = DEGAMMA_SIZE,
 
+            .min_scale                 = DRM_PLANE_NO_SCALING,
 
+            .max_scale                = DRM_PLANE_NO_SCALING,
 
+            .zpos                            = 2,
 
+            .watermark               = true,
 
+            .color_mgmt             = true,
 
+            .roi                      = true,
 
+   },
 
+   {
 
+            .name                         = "Primary_1",
 
+            .id                       = PRIMARY_PLANE_1,
 
+            .type                            = DRM_PLANE_TYPE_PRIMARY,
 
+            .num_formats           = ARRAY_SIZE(primary_overlay_format0),
 
+            .formats            = primary_overlay_format0,
 
+            .num_modifiers                 = ARRAY_SIZE(format_modifier0),
 
+            .modifiers                   = format_modifier0,
 
+            .min_width                = 0,
 
+            .min_height               = 0,
 
+            .max_width               = 4096,
 
+            .max_height              = 4096,
 
+            .rotation           = DRM_MODE_ROTATE_0 |
 
+                                          DRM_MODE_ROTATE_90 |
 
+                                          DRM_MODE_ROTATE_180 |
 
+                                          DRM_MODE_ROTATE_270 |
 
+                                          DRM_MODE_REFLECT_X |
 
+                                          DRM_MODE_REFLECT_Y,
 
+            .blend_mode             = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
 
+                                          BIT(DRM_MODE_BLEND_PREMULTI) |
 
+                                          BIT(DRM_MODE_BLEND_COVERAGE),
 
+            .color_encoding                 = BIT(DRM_COLOR_YCBCR_BT709) |
 
+                                          BIT(DRM_COLOR_YCBCR_BT2020),
 
+            .degamma_size                  = DEGAMMA_SIZE,
 
+            .min_scale                 = FRAC_16_16(1, 3),
 
+            .max_scale                = FRAC_16_16(10, 1),
 
+            .zpos                            = 3,
 
+            .watermark               = true,
 
+            .color_mgmt             = true,
 
+            .roi                      = true,
 
+   },
 
+   {
 
+            .name                         = "Overlay_2",
 
+            .id                       = OVERLAY_PLANE_2,
 
+            .type                            = DRM_PLANE_TYPE_OVERLAY,
 
+            .num_formats           = ARRAY_SIZE(primary_overlay_format0),
 
+            .formats            = primary_overlay_format0,
 
+            .num_modifiers                 = ARRAY_SIZE(format_modifier0),
 
+            .modifiers                   = format_modifier0,
 
+            .min_width                = 0,
 
+            .min_height               = 0,
 
+            .max_width               = 4096,
 
+            .max_height              = 4096,
 
+            .rotation           = DRM_MODE_ROTATE_0 |
 
+                                          DRM_MODE_ROTATE_90 |
 
+                                          DRM_MODE_ROTATE_180 |
 
+                                          DRM_MODE_ROTATE_270 |
 
+                                          DRM_MODE_REFLECT_X |
 
+                                          DRM_MODE_REFLECT_Y,
 
+            .blend_mode             = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
 
+                                          BIT(DRM_MODE_BLEND_PREMULTI) |
 
+                                          BIT(DRM_MODE_BLEND_COVERAGE),
 
+            .color_encoding                 = BIT(DRM_COLOR_YCBCR_BT709) |
 
+                                          BIT(DRM_COLOR_YCBCR_BT2020),
 
+            .degamma_size                  = DEGAMMA_SIZE,
 
+            .min_scale                 = FRAC_16_16(1, 3),
 
+            .max_scale                = FRAC_16_16(10, 1),
 
+            .zpos                            = 4,
 
+            .watermark               = true,
 
+            .color_mgmt             = true,
 
+            .roi                      = true,
 
+   },
 
+   {
 
+            .name                         = "Overlay_3",
 
+            .id                       = OVERLAY_PLANE_3,
Quoted 7 lines
Quoted 7 lines

Review

Quoted 7 lines
(quoted diff) +4 -0
+            .type                            = DRM_PLANE_TYPE_OVERLAY,
 
+            .num_formats           = ARRAY_SIZE(primary_overlay_format0),
 
+            .formats            = primary_overlay_format0,
 
+            .num_modifiers                 =

ARRAY_SIZE(secondary_format_modifiers),

Quoted 160 lines
Quoted 159 lines
Quoted 159 lines
drivers/gpu/drm/verisilicon/vs_dc.c new file +80 -0
+            .modifiers                   = secondary_format_modifiers,
 
+            .min_width                = 0,
 
+            .min_height               = 0,
 
+            .max_width               = 4096,
 
+            .max_height              = 4096,
 
+            .rotation           = 0,
 
+            .blend_mode             = BIT(DRM_MODE_BLEND_PIXEL_NONE) |
 
+                                          BIT(DRM_MODE_BLEND_PREMULTI) |
 
+                                          BIT(DRM_MODE_BLEND_COVERAGE),
 
+            .color_encoding                 = BIT(DRM_COLOR_YCBCR_BT709) |
 
+                                          BIT(DRM_COLOR_YCBCR_BT2020),
 
+            .degamma_size                  = DEGAMMA_SIZE,
 
+            .min_scale                 = DRM_PLANE_NO_SCALING,
 
+            .max_scale                = DRM_PLANE_NO_SCALING,
 
+            .zpos                            = 5,
 
+            .watermark               = true,
 
+            .color_mgmt             = true,
 
+            .roi                      = true,
 
+   },
 
+   {
 
+            .name                         = "Cursor",
 
+            .id                       = CURSOR_PLANE_0,
 
+            .type                            = DRM_PLANE_TYPE_CURSOR,
 
+            .num_formats           = ARRAY_SIZE(cursor_formats),
 
+            .formats            = cursor_formats,
 
+            .num_modifiers                 = 0,
 
+            .modifiers                   = NULL,
 
+            .min_width                = 32,
 
+            .min_height               = 32,
 
+            .max_width               = 64,
 
+            .max_height              = 64,
 
+            .rotation           = 0,
 
+            .degamma_size                  = 0,
 
+            .min_scale                 = DRM_PLANE_NO_SCALING,
 
+            .max_scale                = DRM_PLANE_NO_SCALING,
 
+            .zpos                            = 255,
 
+            .watermark               = false,
 
+            .color_mgmt             = false,
 
+            .roi                      = false,
 
+   },
 
+   {
 
+            .name                         = "Cursor_1",
 
+            .id                       = CURSOR_PLANE_1,
 
+            .type                            = DRM_PLANE_TYPE_CURSOR,
 
+            .num_formats           = ARRAY_SIZE(cursor_formats),
 
+            .formats            = cursor_formats,
 
+            .num_modifiers                 = 0,
 
+            .modifiers                   = NULL,
 
+            .min_width                = 32,
 
+            .min_height               = 32,
 
+            .max_width               = 64,
 
+            .max_height              = 64,
 
+            .rotation           = 0,
 
+            .degamma_size                  = 0,
 
+            .min_scale                 = DRM_PLANE_NO_SCALING,
 
+            .max_scale                = DRM_PLANE_NO_SCALING,
 
+            .zpos                            = 255,
 
+            .watermark               = false,
 
+            .color_mgmt             = false,
 
+            .roi                      = false,
 
+   },
 
+};
 
+
 
+static const struct vs_dc_info dc8200_info = {
 
+   .name                         = "DC8200",
 
+   .panel_num               = 2,
 
+   .plane_num               = 8,
 
+   .planes                        = dc_hw_planes_rev0,
 
+   .layer_num                = 6,
 
+   .max_bpc          = 10,
 
+   .color_formats          = DRM_COLOR_FORMAT_RGB444 |
 
+                                 DRM_COLOR_FORMAT_YCBCR444 |
 
+                                 DRM_COLOR_FORMAT_YCBCR422 |
 
+                                 DRM_COLOR_FORMAT_YCBCR420,
 
+   .gamma_size             = GAMMA_EX_SIZE,
 
+   .gamma_bits             = 12,
 
+   .pitch_alignment     = 128,
 
+   .pipe_sync                  = false,
 
+   .background              = true,
 
+   .panel_sync               = true,
Quoted 7 lines
Quoted 7 lines

drivers/gpu/drm/verisilicon/vs_dc.c line 349

Quoted 3 lines
drivers/gpu/drm/verisilicon/vs_dc.c new file +2 -0
+   .cap_dec           = true,
 
+};

I really think that entire thing is to workaround a suboptimal device tree

binding.

Quoted 13 lines
Quoted 5 lines

You should have two CRTCs in the device tree, you'll probe twice,

and you won't get to do that whole dance.

I tried to modify it according to this idea Found it too difficult In

terms of hardware, the two crtc designs are too close to separate, and

they are even designed into the same reg with different bits

Quoted 7 lines
Quoted 3 lines

representing crtc0 and crtc1. It seems not easy to described the 2

ctrc hardware by 2 device nodes

What are these bits doing?

[cid:[email protected]]

For example:

like this , bit0 and bit1 match ctrc0 and crtc1 , it is used to start crtc

A similar situation exists for other register definitions.

Another case is that ctrc0 and crtc1 have the same function and their offset is continuous,

instead of crtc0 being a continuous area, crtc1 being a continuous area

reg:

crtc0 X

Quoted 7 lines

crtc1 X+4

crtc0 X+8

crtc1 X+12

if to make it two separate devices, the device node dts reg attribute would be complex

Yeah, ok, that makes sense then.

In which case, if we're going to have one big device in the DT with all the planes and CRTCs, why do we need the display-subsystem device? Just make your driver probe on the dc8200 device.

Maxime

#24 lore raw

Re: [v3 4/6] drm/vs: Add KMS crtc&plane

In reply to Keith Zhao

在 2023-12-04星期一的 20:33 +0800,Keith Zhao写道:
*snip*

Quoted 9 lines

+static void update_cursor_plane(struct vs_dc *dc, struct vs_plane *plane,
+                               struct drm_plane *drm_plane, +                               struct drm_atomic_state *drm_state) +{
+       struct drm_plane_state *state = drm_atomic_get_new_plane_state(drm_state,
+
  drm_plane);

Quoted 8 lines

+       struct vs_plane_state *plane_state = to_vs_plane_state(state);
+       struct drm_framebuffer *drm_fb = state->fb; +       struct dc_hw_cursor cursor;
+
+       cursor.address = plane_state->dma_addr[0]; +       cursor.x = state->crtc_x;
+       cursor.y = state->crtc_y;

From my experiments on poking with registers on T-Head TH1520 (also uses DC8200 display controller and a similar driver), the DC8200 hardware have a different definition of cursor position X and Y with the CRTC plane state.

For CRTC plane state, hot_x and hot_y are only provided as reference, and the cursor should be displayed with its (0,0) drawn to (crtc_x, crtc_y) ([XY]_crtc are values specified in CRTC state, the right part of the assignments here), when the cursor is moved to (0,0) but the hot point is not (0,0), it could be negative.

However, for DC8200 registers definition, cursor XY position could not be negative -- the cursor will disappear then; because in its definition, the cursor XY position should be where the cursor is pointing to, instead of its (0,0). DC8200 will draw (0,0) of the cursor to (x - hot_x, y - hot_y). So to met the expectation of the KMS plane settings, the DC8200 position should be set to (crtc_x + hot_x, crtc_y
+ hot_y) instead. Thus these two lines of code should be:

```
        cursor.x = state->crtc_x + drm_fb->hot_x;
        cursor.y = state->crtc_y + drm_fb->hot_y;
```

drivers/gpu/drm/verisilicon/vs_dc.c line 853

Quoted 8 lines

+       cursor.hot_x = drm_fb->hot_x;
+       cursor.hot_y = drm_fb->hot_y;
+       cursor.display_id = to_vs_display_id(dc, state->crtc); +       update_cursor_size(state, &cursor);
+       cursor.enable = true;

drivers/gpu/drm/verisilicon/vs_dc.c new file +3 -0
+
+       dc_hw_update_cursor(&dc->hw, cursor.display_id, &cursor);
+}

*snip
_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv

author
#25 lore raw

Re: [v3 4/6] drm/vs: Add KMS crtc&plane

Quoted 46 lines · Icenowy Zheng

在 2023-12-04星期一的 20:33 +0800,Keith Zhao写道:
*snip*

Quoted 9 lines

+static void update_cursor_plane(struct vs_dc *dc, struct vs_plane *plane,
+                               struct drm_plane *drm_plane, +                               struct drm_atomic_state *drm_state) +{
+       struct drm_plane_state *state = drm_atomic_get_new_plane_state(drm_state,
+
  drm_plane);

Quoted 8 lines

+       struct vs_plane_state *plane_state = to_vs_plane_state(state);
+       struct drm_framebuffer *drm_fb = state->fb; +       struct dc_hw_cursor cursor;
+
+       cursor.address = plane_state->dma_addr[0]; +       cursor.x = state->crtc_x;
+       cursor.y = state->crtc_y;

From my experiments on poking with registers on T-Head TH1520 (also uses DC8200 display controller and a similar driver), the DC8200 hardware have a different definition of cursor position X and Y with the CRTC plane state.

For CRTC plane state, hot_x and hot_y are only provided as reference, and the cursor should be displayed with its (0,0) drawn to (crtc_x, crtc_y) ([XY]_crtc are values specified in CRTC state, the right part of the assignments here), when the cursor is moved to (0,0) but the hot point is not (0,0), it could be negative.

However, for DC8200 registers definition, cursor XY position could not be negative -- the cursor will disappear then; because in its definition, the cursor XY position should be where the cursor is pointing to, instead of its (0,0). DC8200 will draw (0,0) of the cursor to (x - hot_x, y - hot_y). So to met the expectation of the KMS plane settings, the DC8200 position should be set to (crtc_x + hot_x, crtc_y
+ hot_y) instead. Thus these two lines of code should be:

```
        cursor.x = state->crtc_x + drm_fb->hot_x;
        cursor.y = state->crtc_y + drm_fb->hot_y;
```
Quoted 9 lines

drivers/gpu/drm/verisilicon/vs_dc.c line 853

Quoted 8 lines

+       cursor.hot_x = drm_fb->hot_x;
+       cursor.hot_y = drm_fb->hot_y;
+       cursor.display_id = to_vs_display_id(dc, state->crtc); +       update_cursor_size(state, &cursor);
+       cursor.enable = true;

drivers/gpu/drm/verisilicon/vs_dc.c new file +3 -0
+
+       dc_hw_update_cursor(&dc->hw, cursor.display_id, &cursor);
+}

*snip

hello Icenowy:
you are deep understanding on dc8200.
by the way of practice
I tested this change on the debian desktop, is there a way to compare the cursor behavior change? Thanks

#26 lore raw

Re: [v3 4/6] drm/vs: Add KMS crtc&plane

Quoted 69 lines · 在 2023-12-07星期四的 19:31 +0800,Keith Zhao写道:
Quoted 57 lines · Icenowy Zheng

在 2023-12-04星期一的 20:33 +0800,Keith Zhao写道:
*snip*

Quoted 12 lines

+static void update_cursor_plane(struct vs_dc *dc, struct vs_plane
*plane,
+                               struct drm_plane *drm_plane, +                               struct drm_atomic_state *drm_state)
+{
+       struct drm_plane_state *state = drm_atomic_get_new_plane_state(drm_state,
+

  drm_plane);

Quoted 8 lines

+       struct vs_plane_state *plane_state = to_vs_plane_state(state);
+       struct drm_framebuffer *drm_fb = state->fb; +       struct dc_hw_cursor cursor;
+
+       cursor.address = plane_state->dma_addr[0]; +       cursor.x = state->crtc_x;
+       cursor.y = state->crtc_y;

From my experiments on poking with registers on T-Head TH1520 (also uses DC8200 display controller and a similar driver), the DC8200 hardware have a different definition of cursor position X and Y with
the CRTC plane state.

For CRTC plane state, hot_x and hot_y are only provided as reference,
and the cursor should be displayed with its (0,0) drawn to (crtc_x, crtc_y) ([XY]_crtc are values specified in CRTC state, the right part
of the assignments here), when the cursor is moved to (0,0) but the hot
point is not (0,0), it could be negative.

However, for DC8200 registers definition, cursor XY position could not
be negative -- the cursor will disappear then; because in its definition, the cursor XY position should be where the cursor is pointing to, instead of its (0,0). DC8200 will draw (0,0) of the cursor
to (x - hot_x, y - hot_y). So to met the expectation of the KMS plane
settings, the DC8200 position should be set to (crtc_x + hot_x, crtc_y
+ hot_y) instead. Thus these two lines of code should be:

```
        cursor.x = state->crtc_x + drm_fb->hot_x;
        cursor.y = state->crtc_y + drm_fb->hot_y;
```
Quoted 9 lines

drivers/gpu/drm/verisilicon/vs_dc.c line 853

Quoted 8 lines

+       cursor.hot_x = drm_fb->hot_x;
+       cursor.hot_y = drm_fb->hot_y;
+       cursor.display_id = to_vs_display_id(dc, state->crtc); +       update_cursor_size(state, &cursor);
+       cursor.enable = true;

drivers/gpu/drm/verisilicon/vs_dc.c new file +3 -0
+
+       dc_hw_update_cursor(&dc->hw, cursor.display_id, &cursor);
+}

*snip

Quoted 5 lines

hello Icenowy:
you are deep understanding on dc8200.
by the way of practice
I tested this change on the debian desktop, is there a way to compare the cursor behavior change?

Try selecting some small-sized text in a textbox?

Quoted 4 lines

Thanks

#27 lore raw

Re: [v3 4/6] drm/vs: Add KMS crtc&plane

In reply to Keith Zhao
Quoted 54 lines · 在 2023-12-07星期四的 19:31 +0800,Keith Zhao写道:
Quoted 51 lines · Icenowy Zheng

在 2023-12-04星期一的 20:33 +0800,Keith Zhao写道:
*snip*

Quoted 12 lines

+static void update_cursor_plane(struct vs_dc *dc, struct vs_plane
*plane,
+                               struct drm_plane *drm_plane, +                               struct drm_atomic_state *drm_state)
+{
+       struct drm_plane_state *state = drm_atomic_get_new_plane_state(drm_state,
+

  drm_plane);

Quoted 8 lines

+       struct vs_plane_state *plane_state = to_vs_plane_state(state);
+       struct drm_framebuffer *drm_fb = state->fb; +       struct dc_hw_cursor cursor;
+
+       cursor.address = plane_state->dma_addr[0]; +       cursor.x = state->crtc_x;
+       cursor.y = state->crtc_y;

From my experiments on poking with registers on T-Head TH1520 (also uses DC8200 display controller and a similar driver), the DC8200 hardware have a different definition of cursor position X and Y with
the CRTC plane state.

For CRTC plane state, hot_x and hot_y are only provided as reference,
and the cursor should be displayed with its (0,0) drawn to (crtc_x, crtc_y) ([XY]_crtc are values specified in CRTC state, the right part
of the assignments here), when the cursor is moved to (0,0) but the hot
point is not (0,0), it could be negative.

However, for DC8200 registers definition, cursor XY position could not
be negative -- the cursor will disappear then; because in its definition, the cursor XY position should be where the cursor is pointing to, instead of its (0,0). DC8200 will draw (0,0) of the cursor
to (x - hot_x, y - hot_y). So to met the expectation of the KMS plane
settings, the DC8200 position should be set to (crtc_x + hot_x, crtc_y
+ hot_y) instead. Thus these two lines of code should be:

Quoted 4 lines
Quoted 4 lines
```
        cursor.x = state->crtc_x + drm_fb->hot_x;
        cursor.y = state->crtc_y + drm_fb->hot_y;
```

Well I realized that this change is not correct too: when moving the mouse cursor with the screen rotated, the mouse cursor will disappear at some screen border.

My current idea is:

As the CRTC hot point is just a reference, we can just ignore it, and use the HW hot point to implement negative cursor position.

The patch is like the follow:

-    cursor.x = state->crtc_x;
-    cursor.y = state->crtc_y;
-    cursor.hot_x = drm_fb->hot_x;
-    cursor.hot_y = drm_fb->hot_y;
+    if (state->crtc_x > 0) {

+ cursor.x = state->crtc_x;
+ cursor.hot_x = 0;
+ } else {
+ cursor.hot_x = -state->crtc_x;
+ cursor.x = 0;
+ }
+ if (state->crtc_y > 0) {
+ cursor.y = state->crtc_y;
+ cursor.hot_y = 0;
+ } else {
+ cursor.hot_y = -state->crtc_y;
+ cursor.y = 0;
+ }

drm_fb could just be removed in this function then because it's no longer needed (it's used to get the cursor's hot point, which we ignored now).

Quoted 20 lines
Quoted 11 lines

drivers/gpu/drm/verisilicon/vs_dc.c line 853

Quoted 10 lines

+       cursor.hot_x = drm_fb->hot_x;
+       cursor.hot_y = drm_fb->hot_y;
+       cursor.display_id = to_vs_display_id(dc, state->crtc); +       update_cursor_size(state, &cursor);
+       cursor.enable = true;

drivers/gpu/drm/verisilicon/vs_dc.c new file +3 -0
+
+       dc_hw_update_cursor(&dc->hw, cursor.display_id, &cursor);
+}

*snip

hello Icenowy:
you are deep understanding on dc8200.
by the way of practice
I tested this change on the debian desktop, is there a way to compare the cursor behavior change?
Thanks

author
#28 lore raw

PATCH v3 5/6 drm/vs: Add hdmi driver

In reply to Keith Zhao

add hdmi driver as encoder and connect

---
 drivers/gpu/drm/verisilicon/Kconfig         |   8 +
 drivers/gpu/drm/verisilicon/Makefile        |   1 +
 drivers/gpu/drm/verisilicon/starfive_hdmi.c | 849 ++++++++++++++++++++
 drivers/gpu/drm/verisilicon/starfive_hdmi.h | 304 +++++++
 drivers/gpu/drm/verisilicon/vs_drv.c        |   3 +
 drivers/gpu/drm/verisilicon/vs_drv.h        |   4 +
 6 files changed, 1169 insertions(+)
 create mode 100644 drivers/gpu/drm/verisilicon/starfive_hdmi.c
 create mode 100644 drivers/gpu/drm/verisilicon/starfive_hdmi.h
drivers/gpu/drm/verisilicon/Kconfig +8 -0
index e10fa97635aa..122c786e3948 100644
@@ -11,3 +11,11 @@ config DRM_VERISILICON
 	  This driver provides VeriSilicon kernel mode
 	  setting and buffer management. It does not
 	  provide 2D or 3D acceleration.
+
+config DRM_VERISILICON_STARFIVE_HDMI
+	bool "Starfive HDMI extensions"
+	depends on DRM_VERISILICON
+	help
+	   This selects support for StarFive soc specific extensions
+	   for the Innosilicon HDMI driver. If you want to enable
+	   HDMI on JH7110 based soc, you should select this option.
drivers/gpu/drm/verisilicon/Makefile +1 -0
index bf6f2b7ee480..71fadafcee13 100644
@@ -6,4 +6,5 @@ vs_drm-objs := vs_dc_hw.o \
 		vs_drv.o \
 		vs_modeset.o \
 		vs_plane.o
+vs_drm-$(CONFIG_DRM_VERISILICON_STARFIVE_HDMI) += starfive_hdmi.o
 obj-$(CONFIG_DRM_VERISILICON) += vs_drm.o
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +849 -0

849 lines not on this page · raw message

drivers/gpu/drm/verisilicon/starfive_hdmi.h new file +304 -0

304 lines not on this page · raw message

drivers/gpu/drm/verisilicon/vs_drv.c +3 -0
index 3ef90c8238a0..d7e5199fe293 100644
@@ -214,6 +214,9 @@ static const struct component_master_ops vs_drm_ops = {
 
 static struct platform_driver *drm_sub_drivers[] = {
 	&dc_platform_driver,
+#ifdef CONFIG_DRM_VERISILICON_STARFIVE_HDMI
+	&starfive_hdmi_driver,
+#endif
 };
 
 static struct component_match *vs_drm_match_add(struct device *dev)
drivers/gpu/drm/verisilicon/vs_drv.h +4 -0
index ea2189772980..9a88cf9a7362 100644
@@ -39,4 +39,8 @@ to_vs_drm_private(const struct drm_device *dev)
 	return container_of(dev, struct vs_drm_device, base);
 }
 
+#ifdef CONFIG_DRM_VERISILICON_STARFIVE_HDMI
+extern struct platform_driver starfive_hdmi_driver;
+#endif
+
 #endif /* __VS_DRV_H__ */
Signature · 1 line
2.34.1
#29 lore raw

Re: [v3 5/6] drm/vs: Add hdmi driver

Quoted 622 lines · Keith Zhao

add hdmi driver as encoder and connect

---
 drivers/gpu/drm/verisilicon/Kconfig         |   8 +
 drivers/gpu/drm/verisilicon/Makefile        |   1 +
 drivers/gpu/drm/verisilicon/starfive_hdmi.c | 849 ++++++++++++++++++++
 drivers/gpu/drm/verisilicon/starfive_hdmi.h | 304 +++++++
 drivers/gpu/drm/verisilicon/vs_drv.c        |   3 +
 drivers/gpu/drm/verisilicon/vs_drv.h        |   4 +
 6 files changed, 1169 insertions(+)
 create mode 100644 drivers/gpu/drm/verisilicon/starfive_hdmi.c
 create mode 100644 drivers/gpu/drm/verisilicon/starfive_hdmi.h
drivers/gpu/drm/verisilicon/Kconfig +8 -0
index e10fa97635aa..122c786e3948 100644
@@ -11,3 +11,11 @@ config DRM_VERISILICON
          This driver provides VeriSilicon kernel mode
          setting and buffer management. It does not
          provide 2D or 3D acceleration.
+
+config DRM_VERISILICON_STARFIVE_HDMI
+       bool "Starfive HDMI extensions"
+       depends on DRM_VERISILICON
+       help
+          This selects support for StarFive soc specific extensions
+          for the Innosilicon HDMI driver. If you want to enable
+          HDMI on JH7110 based soc, you should select this option.
drivers/gpu/drm/verisilicon/Makefile +1 -0
index bf6f2b7ee480..71fadafcee13 100644
@@ -6,4 +6,5 @@ vs_drm-objs := vs_dc_hw.o \
                vs_drv.o \
                vs_modeset.o \
                vs_plane.o
+vs_drm-$(CONFIG_DRM_VERISILICON_STARFIVE_HDMI) += starfive_hdmi.o
 obj-$(CONFIG_DRM_VERISILICON) += vs_drm.o
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +575 -0
new file mode 100644
index 000000000000..aa621db0dee0
@@ -0,0 +1,849 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2023 StarFive Technology Co., Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/hdmi.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/media-bus-format.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+
+#include <drm/bridge/dw_hdmi.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_managed.h>
+#include <drm/drm_of.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
+
+#include "starfive_hdmi.h"
+#include "vs_drv.h"
+#include "vs_crtc.h"
+
+static const char * const hdmi_clocks[] = {
+       "sysclk",
+       "mclk",
+       "bclk"
+};
+
+static struct starfive_hdmi_encoder *encoder_to_hdmi(struct drm_encoder *encoder)
+{
+       return container_of(encoder, struct starfive_hdmi_encoder, encoder);
+}
+
+static struct starfive_hdmi *connector_to_hdmi(struct drm_connector *connector)
+{
+       return container_of(connector, struct starfive_hdmi, connector);
+}
+
+static const struct post_pll_config post_pll_cfg_table[] = {
+       {25200000,      1, 80, 13, 3, 1},
+       {27000000,      1, 40, 11, 3, 1},
+       {33750000,      1, 40, 11, 3, 1},
+       {49000000,      1, 20, 1, 3, 3},
+       {241700000, 1, 20, 1, 3, 3},
+       {297000000, 4, 20, 0, 0, 3},
+       {594000000, 4, 20, 0, 0, 0},
+       { /* sentinel */ }
+};
+
+inline u8 hdmi_readb(struct starfive_hdmi *hdmi, u16 offset)
+{
+       return readl_relaxed(hdmi->regs + (offset) * 0x04);
+}
+
+inline void hdmi_writeb(struct starfive_hdmi *hdmi, u16 offset, u32 val)
+{
+       writel_relaxed(val, hdmi->regs + (offset) * 0x04);
+}
+
+inline void hdmi_writew(struct starfive_hdmi *hdmi, u16 offset, u32 val)
+{
+       writew_relaxed(val & 0xFF, hdmi->regs + (offset) * 0x04);
+       writew_relaxed((val >> 8) & 0xFF, hdmi->regs + (offset + 1) * 0x04);
+}
+
+inline void hdmi_modb(struct starfive_hdmi *hdmi, u16 offset,
+                            u32 msk, u32 val)
+{
+       u8 temp = hdmi_readb(hdmi, offset) & ~msk;
+
+       temp |= val & msk;
+       hdmi_writeb(hdmi, offset, temp);
+}
+
+static int starfive_hdmi_enable_clk_deassert_rst(struct device *dev, struct starfive_hdmi *hdmi)
+{
+       int ret;
+
+       ret = clk_bulk_prepare_enable(hdmi->nclks, hdmi->clk_hdmi);
+       if (ret) {
+               dev_err(dev, "failed to enable clocks\n");
+               return ret;
+       }
+
+       ret = reset_control_deassert(hdmi->tx_rst);
+       if (ret < 0) {
+               dev_err(dev, "failed to deassert tx_rst\n");
+               return ret;
+       }
+       return 0;
+}
+
+static void starfive_hdmi_disable_clk_assert_rst(struct device *dev, struct starfive_hdmi *hdmi)
+{
+       int ret;
+
+       ret = reset_control_assert(hdmi->tx_rst);
+       if (ret < 0)
+               dev_err(dev, "failed to assert tx_rst\n");
+
+       clk_bulk_disable_unprepare(hdmi->nclks, hdmi->clk_hdmi);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int hdmi_system_pm_suspend(struct device *dev)
+{
+       return pm_runtime_force_suspend(dev);
+}
+
+static int hdmi_system_pm_resume(struct device *dev)
+{
+       return pm_runtime_force_resume(dev);
+}
+#endif
+
+#ifdef CONFIG_PM
+static int hdmi_runtime_suspend(struct device *dev)
+{
+       struct starfive_hdmi *hdmi = dev_get_drvdata(dev);
+
+       starfive_hdmi_disable_clk_assert_rst(dev, hdmi);
+
+       return 0;
+}
+
+static int hdmi_runtime_resume(struct device *dev)
+{
+       struct starfive_hdmi *hdmi = dev_get_drvdata(dev);
+
+       return starfive_hdmi_enable_clk_deassert_rst(dev, hdmi);
+}
+#endif
+
+static void starfive_hdmi_tx_phy_power_down(struct starfive_hdmi *hdmi)
+{
+       hdmi_modb(hdmi, HDMI_SYS_CTRL, m_POWER, v_PWR_OFF);
+}
+
+static void starfive_hdmi_tx_phy_power_on(struct starfive_hdmi *hdmi)
+{
+       hdmi_modb(hdmi, HDMI_SYS_CTRL, m_POWER, v_PWR_ON);
+}
+
+static void starfive_hdmi_config_pll(struct starfive_hdmi *hdmi)
+{
+       u32 val;
+       u8 reg_1ad_value = hdmi->post_cfg->post_div_en ?
+                hdmi->post_cfg->postdiv : 0x00;
+       u8 reg_1aa_value = hdmi->post_cfg->post_div_en ?
+                0x0e : 0x02;
+
+       hdmi_writeb(hdmi, STARFIVE_PRE_PLL_CONTROL, STARFIVE_PRE_PLL_POWER_DOWN);
+       hdmi_writeb(hdmi, STARFIVE_POST_PLL_DIV_1,
+                   STARFIVE_POST_PLL_POST_DIV_ENABLE |
+                   STARFIVE_POST_PLL_REFCLK_SEL_TMDS |
+                   STARFIVE_POST_PLL_POWER_DOWN);
+       hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_1, STARFIVE_PRE_PLL_PRE_DIV(hdmi->pre_cfg.prediv));
+
+       val = STARFIVE_SPREAD_SPECTRUM_MOD_DISABLE | STARFIVE_SPREAD_SPECTRUM_MOD_DOWN;
+       if (!hdmi->pre_cfg.fracdiv)
+               val |= STARFIVE_PRE_PLL_FRAC_DIV_DISABLE;
+       hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_2,
+                   STARFIVE_PRE_PLL_FB_DIV_11_8(hdmi->pre_cfg.fbdiv) | val);
+       hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_3,
+                   STARFIVE_PRE_PLL_FB_DIV_7_0(hdmi->pre_cfg.fbdiv));
+       hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_4,
+                   STARFIVE_PRE_PLL_TMDSCLK_DIV_C(hdmi->pre_cfg.tmds_div_c) |
+                   STARFIVE_PRE_PLL_TMDSCLK_DIV_A(hdmi->pre_cfg.tmds_div_a) |
+                   STARFIVE_PRE_PLL_TMDSCLK_DIV_B(hdmi->pre_cfg.tmds_div_b));
+
+       if (hdmi->pre_cfg.fracdiv) {
+               hdmi_writeb(hdmi, STARFIVE_PRE_PLL_FRAC_DIV_L,
+                           STARFIVE_PRE_PLL_FRAC_DIV_7_0(hdmi->pre_cfg.fracdiv));
+               hdmi_writeb(hdmi, STARFIVE_PRE_PLL_FRAC_DIV_M,
+                           STARFIVE_PRE_PLL_FRAC_DIV_15_8(hdmi->pre_cfg.fracdiv));
+               hdmi_writeb(hdmi, STARFIVE_PRE_PLL_FRAC_DIV_H,
+                           STARFIVE_PRE_PLL_FRAC_DIV_23_16(hdmi->pre_cfg.fracdiv));
+       }
+
+       hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_5,
+                   STARFIVE_PRE_PLL_PCLK_DIV_A(hdmi->pre_cfg.pclk_div_a) |
+                   STARFIVE_PRE_PLL_PCLK_DIV_B(hdmi->pre_cfg.pclk_div_b));
+       hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_6,
+                   STARFIVE_PRE_PLL_PCLK_DIV_C(hdmi->pre_cfg.pclk_div_c) |
+                   STARFIVE_PRE_PLL_PCLK_DIV_D(hdmi->pre_cfg.pclk_div_d));
+
+       /*pre-pll power down*/
+       hdmi_modb(hdmi, STARFIVE_PRE_PLL_CONTROL, STARFIVE_PRE_PLL_POWER_DOWN, 0);
+
+       hdmi_modb(hdmi, STARFIVE_POST_PLL_DIV_2, STARFIVE_POST_PLL_Pre_DIV_MASK,
+                 STARFIVE_POST_PLL_PRE_DIV(hdmi->post_cfg->prediv));
+       hdmi_writeb(hdmi, STARFIVE_POST_PLL_DIV_3, hdmi->post_cfg->fbdiv & 0xff);
+       hdmi_writeb(hdmi, STARFIVE_POST_PLL_DIV_4, reg_1ad_value);
+       hdmi_writeb(hdmi, STARFIVE_POST_PLL_DIV_1, reg_1aa_value);
+}
+
+static void starfive_hdmi_tmds_driver_on(struct starfive_hdmi *hdmi)
+{
+       hdmi_modb(hdmi, STARFIVE_TMDS_CONTROL,
+                 STARFIVE_TMDS_DRIVER_ENABLE, STARFIVE_TMDS_DRIVER_ENABLE);
+}
+
+static void starfive_hdmi_sync_tmds(struct starfive_hdmi *hdmi)
+{
+       /*first send 0 to this bit, then send 1 and keep 1 into this bit*/
+       hdmi_writeb(hdmi, HDMI_SYNC, 0x0);
+       hdmi_writeb(hdmi, HDMI_SYNC, 0x1);
+}
+
+static void starfive_hdmi_i2c_init(struct starfive_hdmi *hdmi)
+{
+       int ddc_bus_freq;
+
+       ddc_bus_freq = (clk_get_rate(hdmi->clk_hdmi[CLK_SYS].clk) >> 2) / HDMI_SCL_RATE;
+
+       hdmi_writeb(hdmi, DDC_BUS_FREQ_L, ddc_bus_freq & 0xFF);
+       hdmi_writeb(hdmi, DDC_BUS_FREQ_H, (ddc_bus_freq >> 8) & 0xFF);
+
+       /* Clear the EDID interrupt flag and mute the interrupt */
+       hdmi_writeb(hdmi, HDMI_INTERRUPT_MASK1, 0);
+       hdmi_writeb(hdmi, HDMI_INTERRUPT_STATUS1, m_INT_EDID_READY);
+}
+
+static void starfive_hdmi_phy_get_pre_pll_cfg(struct starfive_hdmi *hdmi)
+{
+       if (hdmi->tmds_rate > 30000000) {
+               hdmi->pre_cfg.pixclock = hdmi->tmds_rate;
+               hdmi->pre_cfg.tmdsclock = hdmi->tmds_rate;
+               hdmi->pre_cfg.prediv = 1;
+               hdmi->pre_cfg.fbdiv = hdmi->tmds_rate / 3000000;
+               hdmi->pre_cfg.tmds_div_a = 0;
+               hdmi->pre_cfg.tmds_div_b = 1;
+               hdmi->pre_cfg.tmds_div_c = 1;
+               hdmi->pre_cfg.pclk_div_a = 1;
+               hdmi->pre_cfg.pclk_div_b = 0;
+               hdmi->pre_cfg.pclk_div_c = 2;
+               hdmi->pre_cfg.pclk_div_d = 2;
+               hdmi->pre_cfg.vco_div_5_en = hdmi->tmds_rate % 3000000 ? 1 : 0;
+
+               if (hdmi->pre_cfg.vco_div_5_en) {
+                       hdmi->pre_cfg.fracdiv = (hdmi->tmds_rate % 3000000) *
+                                                0xffffff / 1000000;
+               }
+       } else {
+               hdmi->pre_cfg.pixclock = hdmi->tmds_rate;
+               hdmi->pre_cfg.tmdsclock = hdmi->tmds_rate;
+               hdmi->pre_cfg.prediv = 1;
+               hdmi->pre_cfg.fbdiv = hdmi->tmds_rate / 1000000;
+               hdmi->pre_cfg.tmds_div_a = 2;
+               hdmi->pre_cfg.tmds_div_b = 1;
+               hdmi->pre_cfg.tmds_div_c = 1;
+               hdmi->pre_cfg.pclk_div_a = 3;
+               hdmi->pre_cfg.pclk_div_b = 0;
+               hdmi->pre_cfg.pclk_div_c = 3;
+               hdmi->pre_cfg.pclk_div_d = 4;
+               hdmi->pre_cfg.vco_div_5_en = hdmi->tmds_rate % 1000000 ? 1 : 0;
+
+               if (hdmi->pre_cfg.vco_div_5_en) {
+                       hdmi->pre_cfg.fracdiv = (hdmi->tmds_rate % 1000000) *
+                                                0xffffff / 1000000;
+               }
+       }
+}
+
+static int starfive_hdmi_phy_clk_set_rate(struct starfive_hdmi *hdmi)
+{
+       hdmi->post_cfg = post_pll_cfg_table;
+
+       starfive_hdmi_phy_get_pre_pll_cfg(hdmi);
+
+       for (; hdmi->post_cfg->tmdsclock != 0; hdmi->post_cfg++)
+               if (hdmi->tmds_rate <= hdmi->post_cfg->tmdsclock)
+                       break;
+
+       starfive_hdmi_config_pll(hdmi);
+
+       return 0;
+}
+
+static int starfive_hdmi_config_video_timing(struct starfive_hdmi *hdmi,
+                                            struct drm_display_mode *mode)
+{
+       int value;
+       /* Set detail external video timing */
+       value = mode->htotal;
+       hdmi_writew(hdmi, HDMI_VIDEO_EXT_HTOTAL_L, value);
+
+       value = mode->htotal - mode->hdisplay;
+       hdmi_writew(hdmi, HDMI_VIDEO_EXT_HBLANK_L, value);
+
+       value = mode->htotal - mode->hsync_start;
+       hdmi_writew(hdmi, HDMI_VIDEO_EXT_HDELAY_L, value);
+
+       value = mode->hsync_end - mode->hsync_start;
+       hdmi_writew(hdmi, HDMI_VIDEO_EXT_HDURATION_L, value);
+
+       value = mode->vtotal;
+       hdmi_writew(hdmi, HDMI_VIDEO_EXT_VTOTAL_L, value);
+
+       value = mode->vtotal - mode->vdisplay;
+       hdmi_writeb(hdmi, HDMI_VIDEO_EXT_VBLANK, value & 0xFF);
+
+       value = mode->vtotal - mode->vsync_start;
+       hdmi_writeb(hdmi, HDMI_VIDEO_EXT_VDELAY, value & 0xFF);
+
+       value = mode->vsync_end - mode->vsync_start;
+       hdmi_writeb(hdmi, HDMI_VIDEO_EXT_VDURATION, value & 0xFF);
+
+       /* Set detail external video timing polarity and interlace mode */
+       value = v_EXTERANL_VIDEO(1);
+       value |= mode->flags & DRM_MODE_FLAG_PHSYNC ?
+               v_HSYNC_POLARITY(1) : v_HSYNC_POLARITY(0);
+       value |= mode->flags & DRM_MODE_FLAG_PVSYNC ?
+               v_VSYNC_POLARITY(1) : v_VSYNC_POLARITY(0);
+       value |= mode->flags & DRM_MODE_FLAG_INTERLACE ?
+               v_INETLACE(1) : v_INETLACE(0);
+
+       hdmi_writeb(hdmi, HDMI_VIDEO_TIMING_CTL, value);
+       return 0;
+}
+
+static int starfive_hdmi_setup(struct starfive_hdmi *hdmi,
+                              struct drm_display_mode *mode)
+{
+       int ret;
+       u32 val;
+
+       hdmi_modb(hdmi, STARFIVE_BIAS_CONTROL, STARFIVE_BIAS_ENABLE, STARFIVE_BIAS_ENABLE);
+       hdmi_writeb(hdmi, STARFIVE_RX_CONTROL, STARFIVE_RX_ENABLE);
+
+       hdmi->tmds_rate = mode->clock * 1000;
+       starfive_hdmi_phy_clk_set_rate(hdmi);
+
+       ret = readx_poll_timeout(readl_relaxed,
+                                hdmi->regs + (STARFIVE_PRE_PLL_LOCK_STATUS) * 0x04,
+                                val, val & 0x1, 1000, 100000);
+       if (ret < 0) {
+               dev_err(hdmi->dev, "failed to wait pre-pll lock\n");
+               return ret;
+       }
+
+       ret = readx_poll_timeout(readl_relaxed,
+                                hdmi->regs + (STARFIVE_POST_PLL_LOCK_STATUS) * 0x04,
+                                val, val & 0x1, 1000, 100000);
+       if (ret < 0) {
+               dev_err(hdmi->dev, "failed to wait post-pll lock\n");
+               return ret;
+       }
+
+       /*turn on LDO*/
+       hdmi_writeb(hdmi, STARFIVE_LDO_CONTROL, STARFIVE_LDO_ENABLE);
+       /*turn on serializer*/
+       hdmi_writeb(hdmi, STARFIVE_SERIALIER_CONTROL, STARFIVE_SERIALIER_ENABLE);
+
+       starfive_hdmi_tx_phy_power_down(hdmi);
+       starfive_hdmi_config_video_timing(hdmi, mode);
+       starfive_hdmi_tx_phy_power_on(hdmi);
+
+       starfive_hdmi_tmds_driver_on(hdmi);
+       starfive_hdmi_sync_tmds(hdmi);
+
+       return 0;
+}
+
+static void starfive_hdmi_encoder_enable(struct drm_encoder *encoder)
+{
+       struct starfive_hdmi_encoder *hdmi_encoder = encoder_to_hdmi(encoder);
+       struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
+       int ret, idx;
+       struct drm_device *drm = hdmi_encoder->hdmi->connector.dev;
+
+       if (drm && !drm_dev_enter(drm, &idx))
+               return;
+
+       ret = pm_runtime_get_sync(hdmi_encoder->hdmi->dev);
+       if (ret < 0)
+               return;
+       starfive_hdmi_setup(hdmi_encoder->hdmi, mode);
+
+       if (drm)
+               drm_dev_exit(idx);
+}
+
+static void starfive_hdmi_encoder_disable(struct drm_encoder *encoder)
+{
+       struct starfive_hdmi_encoder *hdmi_encoder = encoder_to_hdmi(encoder);
+
+       pm_runtime_put(hdmi_encoder->hdmi->dev);
+}
+
+static int
+starfive_hdmi_encoder_atomic_check(struct drm_encoder *encoder,
+                                  struct drm_crtc_state *crtc_state,
+                                  struct drm_connector_state *conn_state)
+{
+       bool valid = false;
+       struct drm_display_mode *mode = &crtc_state->adjusted_mode;
+       struct vs_crtc_state *vs_crtc_state = to_vs_crtc_state(crtc_state);
+
+       vs_crtc_state->encoder_type = encoder->encoder_type;
+       vs_crtc_state->output_fmt = MEDIA_BUS_FMT_RGB888_1X24;
+
+       int pclk = mode->clock * 1000;
+
+       if (pclk <= PIXCLOCK_4K_30FPS)
+               valid = true;
+
+       return (valid) ? 0 : -EINVAL;
+}
+
+static const struct drm_encoder_helper_funcs starfive_hdmi_encoder_helper_funcs = {
+       .enable     = starfive_hdmi_encoder_enable,
+       .disable    = starfive_hdmi_encoder_disable,
+       .atomic_check = starfive_hdmi_encoder_atomic_check,
+};
+
+static enum drm_connector_status
+starfive_hdmi_connector_detect(struct drm_connector *connector, bool force)
+{
+       struct starfive_hdmi *hdmi = connector_to_hdmi(connector);
+       struct drm_device *drm = hdmi->connector.dev;
+       int ret;
+       int idx;
+
+       if (drm && !drm_dev_enter(drm, &idx))
+               return connector_status_disconnected;
+
+       ret = pm_runtime_get_sync(hdmi->dev);
+       if (ret < 0)
+               return ret;
+
+       ret = (hdmi_readb(hdmi, HDMI_STATUS) & m_HOTPLUG) ?
+               connector_status_connected : connector_status_disconnected;
+       pm_runtime_put(hdmi->dev);
+
+       if (drm)
+               drm_dev_exit(idx);
+
+       return ret;
+}
+
+static int starfive_hdmi_connector_get_modes(struct drm_connector *connector)
+{
+       struct starfive_hdmi *hdmi = connector_to_hdmi(connector);
+       int ret = 0;
+
+       if (!hdmi->ddc)
+               return 0;
+       ret = pm_runtime_get_sync(hdmi->dev);
+       if (ret < 0)
+               return ret;
+
+       ret = drm_connector_helper_get_modes_from_ddc(connector);
+       pm_runtime_put(hdmi->dev);
+
+       return ret;
+}
+
+static enum drm_mode_status
+starfive_hdmi_connector_mode_valid(struct drm_connector *connector,
+                                  struct drm_display_mode *mode)
+{
+       int pclk = mode->clock * 1000;
+       bool valid = false;
+
+       if (pclk <= PIXCLOCK_4K_30FPS)
+               valid = true;
+
+       return (valid) ? MODE_OK : MODE_BAD;
+}
+
+static int
+starfive_hdmi_probe_single_connector_modes(struct drm_connector *connector,
+                                          u32 maxX, u32 maxY)
+{
+       return drm_helper_probe_single_connector_modes(connector, 3840, 2160);
+}
+
+static const struct drm_connector_funcs starfive_hdmi_connector_funcs = {
+       .fill_modes = starfive_hdmi_probe_single_connector_modes,
+       .detect = starfive_hdmi_connector_detect,
+       .reset = drm_atomic_helper_connector_reset,
+       .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+       .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static struct drm_connector_helper_funcs starfive_hdmi_connector_helper_funcs = {
+       .get_modes = starfive_hdmi_connector_get_modes,
+       .mode_valid = starfive_hdmi_connector_mode_valid,
+};
+
+static int starfive_hdmi_register(struct drm_device *drm,
+                                 struct starfive_hdmi_encoder *hdmi_encoder)
+{
+       struct drm_encoder *encoder = &hdmi_encoder->encoder;
+       struct device *dev = hdmi_encoder->hdmi->dev;
+
+       encoder->possible_crtcs = drm_of_find_possible_crtcs(drm, dev->of_node);
+
+       /*
+        * If we failed to find the CRTC(s) which this encoder is
+        * supposed to be connected to, it's because the CRTC has
+        * not been registered yet.  Defer probing, and hope that
+        * the required CRTC is added later.
+        */
+       if (encoder->possible_crtcs == 0)
+               return -EPROBE_DEFER;
+
+       drm_encoder_helper_add(encoder, &starfive_hdmi_encoder_helper_funcs);
+
+       hdmi_encoder->hdmi->connector.polled = DRM_CONNECTOR_POLL_HPD;
+
+       drm_connector_helper_add(&hdmi_encoder->hdmi->connector,
+                                &starfive_hdmi_connector_helper_funcs);
+       drmm_connector_init(drm, &hdmi_encoder->hdmi->connector,
+                           &starfive_hdmi_connector_funcs,
+                           DRM_MODE_CONNECTOR_HDMIA,
+                           hdmi_encoder->hdmi->ddc);
+
+       drm_connector_attach_encoder(&hdmi_encoder->hdmi->connector, encoder);
+
+       return 0;
+}
+
+static irqreturn_t starfive_hdmi_i2c_irq(struct starfive_hdmi *hdmi)
+{
+       struct starfive_hdmi_i2c *i2c = hdmi->i2c;
+       u8 stat;
+
+       stat = hdmi_readb(hdmi, HDMI_INTERRUPT_STATUS1);
+       if (!(stat & m_INT_EDID_READY))
+               return IRQ_NONE;
+
+       /* Clear HDMI EDID interrupt flag */
+       hdmi_writeb(hdmi, HDMI_INTERRUPT_STATUS1, m_INT_EDID_READY);
+
+       complete(&i2c->cmp);
+
+       return IRQ_HANDLED;
+}
+
+static irqreturn_t starfive_hdmi_hardirq(int irq, void *dev_id)
+{
+       struct starfive_hdmi *hdmi = dev_id;
+       irqreturn_t ret = IRQ_NONE;
+       u8 interrupt;
+
+       if (hdmi->i2c)
+               ret = starfive_hdmi_i2c_irq(hdmi);
+
+       interrupt = hdmi_readb(hdmi, HDMI_STATUS);
+       if (interrupt & m_INT_HOTPLUG) {
+               hdmi_modb(hdmi, HDMI_STATUS, m_INT_HOTPLUG, m_INT_HOTPLUG);
+               ret = IRQ_WAKE_THREAD;
+       }
+
+       return ret;
+}
+
+static irqreturn_t starfive_hdmi_irq(int irq, void *dev_id)
+{
+       struct starfive_hdmi *hdmi = dev_id;
+
+       drm_connector_helper_hpd_irq_event(&hdmi->connector);
+

drivers/gpu/drm/verisilicon/starfive_hdmi.c line 585

Quoted 10 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +10 -0
+       return IRQ_HANDLED;
+}
+
+static int starfive_hdmi_i2c_read(struct starfive_hdmi *hdmi, struct i2c_msg *msgs)
+{
+       int length = msgs->len;
+       u8 *buf = msgs->buf;
+       int ret;
+
+       ret = wait_for_completion_timeout(&hdmi->i2c->cmp, HZ / 10);

What if the I2C transfer doesn't come in a write-read pair? Or if it comes with more read transfers? You are heavily depending on the particular message transfer structure.

Quoted 108 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +108 -0
+       if (!ret)
+               return -EAGAIN;
+
+       while (length--)
+               *buf++ = hdmi_readb(hdmi, HDMI_EDID_FIFO_ADDR);
+
+       return 0;
+}
+
+static int starfive_hdmi_i2c_write(struct starfive_hdmi *hdmi, struct i2c_msg *msgs)
+{
+       /*
+        * The DDC module only support read EDID message, so
+        * we assume that each word write to this i2c adapter
+        * should be the offset of EDID word address.
+        */
+       if (msgs->len != 1 ||
+           (msgs->addr != DDC_ADDR && msgs->addr != DDC_SEGMENT_ADDR))
+               return -EINVAL;
+
+       reinit_completion(&hdmi->i2c->cmp);
+
+       if (msgs->addr == DDC_SEGMENT_ADDR)
+               hdmi->i2c->segment_addr = msgs->buf[0];
+       if (msgs->addr == DDC_ADDR)
+               hdmi->i2c->ddc_addr = msgs->buf[0];
+
+       /* Set edid fifo first addr */
+       hdmi_writeb(hdmi, HDMI_EDID_FIFO_OFFSET, 0x00);
+
+       /* Set edid word address 0x00/0x80 */
+       hdmi_writeb(hdmi, HDMI_EDID_WORD_ADDR, hdmi->i2c->ddc_addr);
+
+       /* Set edid segment pointer */
+       hdmi_writeb(hdmi, HDMI_EDID_SEGMENT_POINTER, hdmi->i2c->segment_addr);
+
+       return 0;
+}
+
+static int starfive_hdmi_i2c_xfer(struct i2c_adapter *adap,
+                                 struct i2c_msg *msgs, int num)
+{
+       struct starfive_hdmi *hdmi = i2c_get_adapdata(adap);
+       struct starfive_hdmi_i2c *i2c = hdmi->i2c;
+       int i, ret = 0;
+
+       mutex_lock(&i2c->lock);
+
+       /* Clear the EDID interrupt flag and unmute the interrupt */
+       hdmi_writeb(hdmi, HDMI_INTERRUPT_MASK1, m_INT_EDID_READY);
+       hdmi_writeb(hdmi, HDMI_INTERRUPT_STATUS1, m_INT_EDID_READY);
+
+       for (i = 0; i < num; i++) {
+               DRM_DEV_DEBUG(hdmi->dev,
+                             "xfer: num: %d/%d, len: %d, flags: %#x\n",
+                             i + 1, num, msgs[i].len, msgs[i].flags);
+
+               if (msgs[i].flags & I2C_M_RD)
+                       ret = starfive_hdmi_i2c_read(hdmi, &msgs[i]);
+               else
+                       ret = starfive_hdmi_i2c_write(hdmi, &msgs[i]);
+
+               if (ret < 0)
+                       break;
+       }
+
+       if (!ret)
+               ret = num;
+
+       /* Mute HDMI EDID interrupt */
+       hdmi_writeb(hdmi, HDMI_INTERRUPT_MASK1, 0);
+
+       mutex_unlock(&i2c->lock);
+
+       return ret;
+}
+
+static u32 starfive_hdmi_i2c_func(struct i2c_adapter *adapter)
+{
+       return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm starfive_hdmi_algorithm = {
+       .master_xfer    = starfive_hdmi_i2c_xfer,
+       .functionality  = starfive_hdmi_i2c_func,
+};
+
+static struct i2c_adapter *starfive_hdmi_i2c_adapter(struct starfive_hdmi *hdmi)
+{
+       struct i2c_adapter *adap;
+       struct starfive_hdmi_i2c *i2c;
+       int ret;
+
+       i2c = devm_kzalloc(hdmi->dev, sizeof(*i2c), GFP_KERNEL);
+               if (!i2c)
+                       return ERR_PTR(-ENOMEM);
+
+       mutex_init(&i2c->lock);
+       init_completion(&i2c->cmp);
+
+       adap = &i2c->adap;
+       adap->class = I2C_CLASS_DDC;
+       adap->owner = THIS_MODULE;
+       adap->dev.parent = hdmi->dev;
+       adap->algo = &starfive_hdmi_algorithm;
+       strscpy(adap->name, "Starfive HDMI", sizeof(adap->name));
+       i2c_set_adapdata(adap, hdmi);
+

drivers/gpu/drm/verisilicon/starfive_hdmi.c line 703

Quoted 10 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +10 -0
+       ret = devm_i2c_add_adapter(hdmi->dev, adap);
+       if (ret) {
+               dev_warn(hdmi->dev, "cannot add %s I2C adapter\n", adap->name);
+               devm_kfree(hdmi->dev, i2c);
+               return ERR_PTR(ret);
+       }
+
+       hdmi->i2c = i2c;
+
+       DRM_DEV_INFO(hdmi->dev, "registered %s I2C bus driver success\n", adap->name);

this should be drm_dbg

Quoted 52 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +52 -0
+
+       return adap;
+}
+
+static int starfive_hdmi_get_clk_rst(struct device *dev, struct starfive_hdmi *hdmi)
+{
+       int ret;
+
+       hdmi->nclks = ARRAY_SIZE(hdmi->clk_hdmi);
+       for (int i = 0; i < hdmi->nclks; ++i)
+               hdmi->clk_hdmi[i].id = hdmi_clocks[i];
+
+       ret = devm_clk_bulk_get(dev, hdmi->nclks, hdmi->clk_hdmi);
+       if (ret) {
+               dev_err(dev, "Failed to get clk controls\n");
+               return ret;
+       }
+
+       hdmi->tx_rst = devm_reset_control_get_by_index(dev, 0);
+       if (IS_ERR(hdmi->tx_rst)) {
+               dev_err(dev, "failed to get tx_rst reset\n");
+               return PTR_ERR(hdmi->tx_rst);
+       }
+
+       return 0;
+}
+
+static int starfive_hdmi_bind(struct device *dev, struct device *master,
+                             void *data)
+{
+       struct drm_device *drm = dev_get_drvdata(master);
+       struct starfive_hdmi_encoder *hdmi_encoder;
+       int ret;
+
+       hdmi_encoder = drmm_simple_encoder_alloc(drm, struct starfive_hdmi_encoder,
+                                                encoder, DRM_MODE_ENCODER_TMDS);
+       if (IS_ERR(hdmi_encoder))
+               return PTR_ERR(hdmi_encoder);
+
+       hdmi_encoder->hdmi = dev_get_drvdata(dev);
+       hdmi_encoder->hdmi->drm_dev = drm;
+
+       ret = pm_runtime_resume_and_get(dev);
+       if (ret)
+               return ret;
+
+       starfive_hdmi_i2c_init(hdmi_encoder->hdmi);
+
+       ret = starfive_hdmi_register(drm, hdmi_encoder);
+       if (ret)
+               goto err_put_adapter;
+

drivers/gpu/drm/verisilicon/starfive_hdmi.c line 765

Quoted 10 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +10 -0
+       /* Unmute hotplug interrupt */
+       hdmi_modb(hdmi_encoder->hdmi, HDMI_STATUS, m_MASK_INT_HOTPLUG, v_MASK_INT_HOTPLUG(1));
+
+       ret = devm_request_threaded_irq(dev, hdmi_encoder->hdmi->irq, starfive_hdmi_hardirq,
+                                       starfive_hdmi_irq, IRQF_SHARED,
+                                       dev_name(dev), hdmi_encoder->hdmi);
+       if (ret < 0)
+               goto err_put_adapter;
+
+       pm_runtime_put_sync(dev);

What happens if the IRQ is triggered while the device is suspended?

drivers/gpu/drm/verisilicon/starfive_hdmi.c line 770

Quoted 5 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +5 -0
+
+       return 0;
+
+err_put_adapter:
+       i2c_put_adapter(hdmi_encoder->hdmi->ddc);

pm_runtime_put_sync is missing.

Quoted 419 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +79 -0
+       return ret;
+}
+
+static const struct component_ops starfive_hdmi_ops = {
+       .bind   = starfive_hdmi_bind,
+};
+
+static int starfive_hdmi_probe(struct platform_device *pdev)
+{
+       int ret;
+       struct starfive_hdmi *hdmi;
+       struct resource *iores;
+
+       hdmi = devm_kzalloc(&pdev->dev, sizeof(*hdmi), GFP_KERNEL);
+       if (!hdmi)
+               return -ENOMEM;
+
+       dev_set_drvdata(&pdev->dev, hdmi);
+       hdmi->dev = &pdev->dev;
+
+       iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       hdmi->regs = devm_ioremap_resource(hdmi->dev, iores);
+       if (IS_ERR(hdmi->regs))
+               return PTR_ERR(hdmi->regs);
+
+       ret = starfive_hdmi_get_clk_rst(hdmi->dev, hdmi);
+       if (ret < 0)
+               return ret;
+
+       ret = devm_pm_runtime_enable(hdmi->dev);
+       if (ret)
+               return ret;
+
+       hdmi->irq = platform_get_irq(pdev, 0);
+       if (hdmi->irq < 0) {
+               ret = hdmi->irq;
+               return ret;
+       }
+
+       hdmi->ddc = starfive_hdmi_i2c_adapter(hdmi);
+       if (IS_ERR(hdmi->ddc)) {
+               ret = PTR_ERR(hdmi->ddc);
+               hdmi->ddc = NULL;
+               return ret;
+       }
+
+       return component_add(&pdev->dev, &starfive_hdmi_ops);
+}
+
+static int starfive_hdmi_remove(struct platform_device *pdev)
+{
+       component_del(&pdev->dev, &starfive_hdmi_ops);
+
+       return 0;
+}
+
+static const struct dev_pm_ops hdmi_pm_ops = {
+       SET_RUNTIME_PM_OPS(hdmi_runtime_suspend, hdmi_runtime_resume, NULL)
+       SET_LATE_SYSTEM_SLEEP_PM_OPS(hdmi_system_pm_suspend, hdmi_system_pm_resume)
+};
+
+static const struct of_device_id starfive_hdmi_dt_ids[] = {
+       { .compatible = "starfive,jh7110-inno-hdmi",},
+       {},
+};
+MODULE_DEVICE_TABLE(of, starfive_hdmi_dt_ids);
+
+struct platform_driver starfive_hdmi_driver = {
+       .probe  = starfive_hdmi_probe,
+       .remove = starfive_hdmi_remove,
+       .driver = {
+               .name = "starfive-hdmi",
+               .of_match_table = starfive_hdmi_dt_ids,
+               .pm = &hdmi_pm_ops,
+       },
+};
+
+MODULE_AUTHOR("StarFive Corporation");
+MODULE_DESCRIPTION("Starfive HDMI Driver");
drivers/gpu/drm/verisilicon/starfive_hdmi.h new file +304 -0
new file mode 100644
index 000000000000..ca5f40be0796
@@ -0,0 +1,304 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2023 StarFive Technology Co., Ltd.
+ */
+
+#ifndef __STARFIVE_HDMI_H__
+#define __STARFIVE_HDMI_H__
+
+#include <drm/bridge/dw_hdmi.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_of.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+
+#define DDC_SEGMENT_ADDR               0x30
+
+#define HDMI_SCL_RATE                  (100 * 1000)
+#define DDC_BUS_FREQ_L                 0x4b
+#define DDC_BUS_FREQ_H                 0x4c
+
+#define HDMI_SYS_CTRL                  0x00
+#define m_RST_ANALOG                   BIT(6)
+#define v_RST_ANALOG                   0
+#define v_NOT_RST_ANALOG               BIT(6)
+#define m_RST_DIGITAL                  BIT(5)
+#define v_RST_DIGITAL                  0
+#define v_NOT_RST_DIGITAL              BIT(5)
+#define m_REG_CLK_INV                  BIT(4)
+#define v_REG_CLK_NOT_INV              0
+#define v_REG_CLK_INV                  BIT(4)
+#define m_VCLK_INV                             BIT(3)
+#define v_VCLK_NOT_INV                 0
+#define v_VCLK_INV                             BIT(3)
+#define m_REG_CLK_SOURCE               BIT(2)
+#define v_REG_CLK_SOURCE_TMDS          0
+#define v_REG_CLK_SOURCE_SYS           BIT(2)
+#define m_POWER                                        BIT(1)
+#define v_PWR_ON                               0
+#define v_PWR_OFF                              BIT(1)
+#define m_INT_POL                              BIT(0)
+#define v_INT_POL_HIGH                 1
+#define v_INT_POL_LOW                  0
+
+#define HDMI_AV_MUTE                   0x05
+#define m_AVMUTE_CLEAR                 BIT(7)
+#define m_AVMUTE_ENABLE                        BIT(6)
+#define m_AUDIO_MUTE                   BIT(1)
+#define m_VIDEO_BLACK                  BIT(0)
+#define v_AVMUTE_CLEAR(n)              ((n) << 7)
+#define v_AVMUTE_ENABLE(n)             ((n) << 6)
+#define v_AUDIO_MUTE(n)                        ((n) << 1)
+#define v_VIDEO_MUTE(n)                        ((n) << 0)
+
+#define HDMI_VIDEO_TIMING_CTL          0x08
+#define v_VSYNC_POLARITY(n)            ((n) << 3)
+#define v_HSYNC_POLARITY(n)            ((n) << 2)
+#define v_INETLACE(n)                  ((n) << 1)
+#define v_EXTERANL_VIDEO(n)            ((n) << 0)
+
+#define HDMI_VIDEO_EXT_HTOTAL_L                0x09
+#define HDMI_VIDEO_EXT_HTOTAL_H                0x0a
+#define HDMI_VIDEO_EXT_HBLANK_L                0x0b
+#define HDMI_VIDEO_EXT_HBLANK_H                0x0c
+#define HDMI_VIDEO_EXT_HDELAY_L                0x0d
+#define HDMI_VIDEO_EXT_HDELAY_H                0x0e
+#define HDMI_VIDEO_EXT_HDURATION_L     0x0f
+#define HDMI_VIDEO_EXT_HDURATION_H     0x10
+#define HDMI_VIDEO_EXT_VTOTAL_L                0x11
+#define HDMI_VIDEO_EXT_VTOTAL_H                0x12
+#define HDMI_VIDEO_EXT_VBLANK          0x13
+#define HDMI_VIDEO_EXT_VDELAY          0x14
+#define HDMI_VIDEO_EXT_VDURATION       0x15
+
+#define HDMI_EDID_SEGMENT_POINTER      0x4d
+#define HDMI_EDID_WORD_ADDR                    0x4e
+#define HDMI_EDID_FIFO_OFFSET          0x4f
+#define HDMI_EDID_FIFO_ADDR                    0x50
+
+#define HDMI_INTERRUPT_MASK1           0xc0
+#define HDMI_INTERRUPT_STATUS1         0xc1
+#define        m_INT_ACTIVE_VSYNC                      BIT(5)
+#define m_INT_EDID_READY                       BIT(2)
+
+#define HDMI_STATUS                                    0xc8
+#define m_HOTPLUG                                      BIT(7)
+#define m_MASK_INT_HOTPLUG                     BIT(5)
+#define m_INT_HOTPLUG                          BIT(1)
+#define v_MASK_INT_HOTPLUG(n)          (((n) & 0x1) << 5)
+
+#define HDMI_SYNC                                      0xce
+
+#define UPDATE(x, h, l)                                        FIELD_PREP(GENMASK(h, l), x)
+
+/* REG: 0x1a0 */
+#define STARFIVE_PRE_PLL_CONTROL                       0x1a0
+#define STARFIVE_PCLK_VCO_DIV_5_MASK           BIT(1)
+#define STARFIVE_PCLK_VCO_DIV_5(x)                     UPDATE(x, 1, 1)
+#define STARFIVE_PRE_PLL_POWER_DOWN                    BIT(0)
+
+/* REG: 0x1a1 */
+#define STARFIVE_PRE_PLL_DIV_1                         0x1a1
+#define STARFIVE_PRE_PLL_PRE_DIV_MASK          GENMASK(5, 0)
+#define STARFIVE_PRE_PLL_PRE_DIV(x)                    UPDATE(x, 5, 0)
+
+/* REG: 0x1a2 */
+#define STARFIVE_PRE_PLL_DIV_2                                 0x1a2
+#define STARFIVE_SPREAD_SPECTRUM_MOD_DOWN              BIT(7)
+#define STARFIVE_SPREAD_SPECTRUM_MOD_DISABLE   BIT(6)
+#define STARFIVE_PRE_PLL_FRAC_DIV_DISABLE              UPDATE(3, 5, 4)
+#define STARFIVE_PRE_PLL_FB_DIV_11_8_MASK              GENMASK(3, 0)
+#define STARFIVE_PRE_PLL_FB_DIV_11_8(x)                        UPDATE((x) >> 8, 3, 0)
+
+/* REG: 0x1a3 */
+#define STARFIVE_PRE_PLL_DIV_3                                 0x1a3
+#define STARFIVE_PRE_PLL_FB_DIV_7_0(x)                 UPDATE(x, 7, 0)
+
+/* REG: 0x1a4*/
+#define STARFIVE_PRE_PLL_DIV_4                                 0x1a4
+#define STARFIVE_PRE_PLL_TMDSCLK_DIV_C_MASK            GENMASK(1, 0)
+#define STARFIVE_PRE_PLL_TMDSCLK_DIV_C(x)              UPDATE(x, 1, 0)
+#define STARFIVE_PRE_PLL_TMDSCLK_DIV_B_MASK            GENMASK(3, 2)
+#define STARFIVE_PRE_PLL_TMDSCLK_DIV_B(x)              UPDATE(x, 3, 2)
+#define STARFIVE_PRE_PLL_TMDSCLK_DIV_A_MASK            GENMASK(5, 4)
+#define STARFIVE_PRE_PLL_TMDSCLK_DIV_A(x)              UPDATE(x, 5, 4)
+
+/* REG: 0x1a5 */
+#define STARFIVE_PRE_PLL_DIV_5                                 0x1a5
+#define STARFIVE_PRE_PLL_PCLK_DIV_B_SHIFT              5
+#define STARFIVE_PRE_PLL_PCLK_DIV_B_MASK               GENMASK(6, 5)
+#define STARFIVE_PRE_PLL_PCLK_DIV_B(x)                 UPDATE(x, 6, 5)
+#define STARFIVE_PRE_PLL_PCLK_DIV_A_MASK               GENMASK(4, 0)
+#define STARFIVE_PRE_PLL_PCLK_DIV_A(x)                 UPDATE(x, 4, 0)
+
+/* REG: 0x1a6 */
+#define STARFIVE_PRE_PLL_DIV_6                                 0x1a6
+#define STARFIVE_PRE_PLL_PCLK_DIV_C_SHIFT              5
+#define STARFIVE_PRE_PLL_PCLK_DIV_C_MASK               GENMASK(6, 5)
+#define STARFIVE_PRE_PLL_PCLK_DIV_C(x)                 UPDATE(x, 6, 5)
+#define STARFIVE_PRE_PLL_PCLK_DIV_D_MASK               GENMASK(4, 0)
+#define STARFIVE_PRE_PLL_PCLK_DIV_D(x)                 UPDATE(x, 4, 0)
+
+/* REG: 0x1a9 */
+#define STARFIVE_PRE_PLL_LOCK_STATUS                   0x1a9
+
+/* REG: 0x1aa */
+#define STARFIVE_POST_PLL_DIV_1                                        0x1aa
+#define STARFIVE_POST_PLL_POST_DIV_ENABLE              GENMASK(3, 2)
+#define STARFIVE_POST_PLL_REFCLK_SEL_TMDS              BIT(1)
+#define STARFIVE_POST_PLL_POWER_DOWN                   BIT(0)
+#define STARFIVE_POST_PLL_FB_DIV_8(x)                  UPDATE(((x) >> 8) << 4, 4, 4)
+
+/* REG:0x1ab */
+#define STARFIVE_POST_PLL_DIV_2                                        0x1ab
+#define STARFIVE_POST_PLL_Pre_DIV_MASK                 GENMASK(5, 0)
+#define STARFIVE_POST_PLL_PRE_DIV(x)                   UPDATE(x, 5, 0)
+
+/* REG: 0x1ac */
+#define STARFIVE_POST_PLL_DIV_3                                        0x1ac
+#define STARFIVE_POST_PLL_FB_DIV_7_0(x)                        UPDATE(x, 7, 0)
+
+/* REG: 0x1ad */
+#define STARFIVE_POST_PLL_DIV_4                                        0x1ad
+#define STARFIVE_POST_PLL_POST_DIV_MASK                        GENMASK(2, 0)
+#define STARFIVE_POST_PLL_POST_DIV_2                   0x0
+#define STARFIVE_POST_PLL_POST_DIV_4                   0x1
+#define STARFIVE_POST_PLL_POST_DIV_8                   0x3
+
+/* REG: 0x1af */
+#define STARFIVE_POST_PLL_LOCK_STATUS                  0x1af
+
+/* REG: 0x1b0 */
+#define STARFIVE_BIAS_CONTROL                                  0x1b0
+#define STARFIVE_BIAS_ENABLE                                   BIT(2)
+
+/* REG: 0x1b2 */
+#define STARFIVE_TMDS_CONTROL                          0x1b2
+#define STARFIVE_TMDS_CLK_DRIVER_EN                    BIT(3)
+#define STARFIVE_TMDS_D2_DRIVER_EN                     BIT(2)
+#define STARFIVE_TMDS_D1_DRIVER_EN                     BIT(1)
+#define STARFIVE_TMDS_D0_DRIVER_EN                     BIT(0)
+#define STARFIVE_TMDS_DRIVER_ENABLE                    (STARFIVE_TMDS_CLK_DRIVER_EN | \
+                                                        STARFIVE_TMDS_D2_DRIVER_EN | \
+                                                        STARFIVE_TMDS_D1_DRIVER_EN | \
+                                                        STARFIVE_TMDS_D0_DRIVER_EN)
+
+/* REG: 0x1b4 */
+#define STARFIVE_LDO_CONTROL                   0x1b4
+#define STARFIVE_LDO_D2_EN                             BIT(2)
+#define STARFIVE_LDO_D1_EN                             BIT(1)
+#define STARFIVE_LDO_D0_EN                             BIT(0)
+#define STARFIVE_LDO_ENABLE                            (STARFIVE_LDO_D2_EN | \
+                                                        STARFIVE_LDO_D1_EN | \
+                                                        STARFIVE_LDO_D0_EN)
+
+/* REG: 0x1be */
+#define STARFIVE_SERIALIER_CONTROL                     0x1be
+#define STARFIVE_SERIALIER_D2_EN                       BIT(6)
+#define STARFIVE_SERIALIER_D1_EN                       BIT(5)
+#define STARFIVE_SERIALIER_D0_EN                       BIT(4)
+#define STARFIVE_SERIALIER_EN                          BIT(0)
+
+#define STARFIVE_SERIALIER_ENABLE                      (STARFIVE_SERIALIER_D2_EN | \
+                                                        STARFIVE_SERIALIER_D1_EN | \
+                                                        STARFIVE_SERIALIER_D0_EN | \
+                                                        STARFIVE_SERIALIER_EN)
+
+/* REG: 0x1cc */
+#define STARFIVE_RX_CONTROL                            0x1cc
+#define STARFIVE_RX_EN                                 BIT(3)
+#define STARFIVE_RX_CHANNEL_2_EN                       BIT(2)
+#define STARFIVE_RX_CHANNEL_1_EN                       BIT(1)
+#define STARFIVE_RX_CHANNEL_0_EN                       BIT(0)
+#define STARFIVE_RX_ENABLE                             (STARFIVE_RX_EN | \
+                                                        STARFIVE_RX_CHANNEL_2_EN | \
+                                                        STARFIVE_RX_CHANNEL_1_EN | \
+                                                        STARFIVE_RX_CHANNEL_0_EN)
+
+/* REG: 0x1d1 */
+#define STARFIVE_PRE_PLL_FRAC_DIV_H                    0x1d1
+#define STARFIVE_PRE_PLL_FRAC_DIV_23_16(x)             UPDATE((x) >> 16, 7, 0)
+/* REG: 0x1d2 */
+#define STARFIVE_PRE_PLL_FRAC_DIV_M                    0x1d2
+#define STARFIVE_PRE_PLL_FRAC_DIV_15_8(x)              UPDATE((x) >> 8, 7, 0)
+/* REG: 0x1d3 */
+#define STARFIVE_PRE_PLL_FRAC_DIV_L                    0x1d3
+#define STARFIVE_PRE_PLL_FRAC_DIV_7_0(x)               UPDATE(x, 7, 0)
+
+#define PIXCLOCK_4K_30FPS                                      297000000
+
+enum hdmi_clk {
+       CLK_SYS = 0,
+       CLK_M,
+       CLK_B,
+       CLK_HDMI_NUM
+};
+
+struct pre_pll_config {
+       unsigned long pixclock;
+       unsigned long tmdsclock;
+       u8 prediv;
+       u16 fbdiv;
+       u8 tmds_div_a;
+       u8 tmds_div_b;
+       u8 tmds_div_c;
+       u8 pclk_div_a;
+       u8 pclk_div_b;
+       u8 pclk_div_c;
+       u8 pclk_div_d;
+       u8 vco_div_5_en;
+       u32 fracdiv;
+};
+
+struct post_pll_config {
+       unsigned long tmdsclock;
+       u8 prediv;
+       u16 fbdiv;
+       u8 postdiv;
+       u8 post_div_en;
+       u8 version;
+};
+
+struct phy_config {
+       unsigned long   tmdsclock;
+       u8              regs[14];
+};
+
+struct starfive_hdmi_encoder {
+       struct drm_encoder encoder;
+       struct starfive_hdmi *hdmi;
+};
+
+struct starfive_hdmi_i2c {
+       struct i2c_adapter adap;
+
+       u8 ddc_addr;
+       u8 segment_addr;
+       /* protects the edid data when use i2c cmd to read edid */
+       struct mutex lock;
+       struct completion cmp;
+};
+
+struct starfive_hdmi {
+       struct device *dev;
+       struct drm_device *drm_dev;
+       struct drm_connector    connector;
+       void __iomem *regs;
+
+       int irq;
+       struct clk_bulk_data    clk_hdmi[CLK_HDMI_NUM];
+       struct reset_control *tx_rst;
+       int     nclks;
+
+       struct i2c_adapter *ddc;
+       struct starfive_hdmi_i2c *i2c;
+
+       unsigned long tmds_rate;
+       struct pre_pll_config   pre_cfg;
+       const struct post_pll_config    *post_cfg;
+};
+
+#endif /* __STARFIVE_HDMI_H__ */
drivers/gpu/drm/verisilicon/vs_drv.c +3 -0
index 3ef90c8238a0..d7e5199fe293 100644
@@ -214,6 +214,9 @@ static const struct component_master_ops vs_drm_ops = {
 
 static struct platform_driver *drm_sub_drivers[] = {
        &dc_platform_driver,
+#ifdef CONFIG_DRM_VERISILICON_STARFIVE_HDMI
+       &starfive_hdmi_driver,
+#endif
 };
 
 static struct component_match *vs_drm_match_add(struct device *dev)
drivers/gpu/drm/verisilicon/vs_drv.h +4 -1
index ea2189772980..9a88cf9a7362 100644
@@ -39,4 +39,8 @@ to_vs_drm_private(const struct drm_device *dev)
        return container_of(dev, struct vs_drm_device, base);
 }
 
+#ifdef CONFIG_DRM_VERISILICON_STARFIVE_HDMI
+extern struct platform_driver starfive_hdmi_driver;
+#endif
+
 #endif /* __VS_DRV_H__ */
--

2.34.1

Signature · 2 lines
With best wishes
Dmitry
maintainer
#30 lore raw

Re: [v3 5/6] drm/vs: Add hdmi driver

In reply to Keith Zhao
Quoted 20 lines · Keith Zhao

add hdmi driver as encoder and connect

---
 drivers/gpu/drm/verisilicon/Kconfig         |   8 +
 drivers/gpu/drm/verisilicon/Makefile        |   1 +
 drivers/gpu/drm/verisilicon/starfive_hdmi.c | 849 ++++++++++++++++++++
 drivers/gpu/drm/verisilicon/starfive_hdmi.h | 304 +++++++
 drivers/gpu/drm/verisilicon/vs_drv.c        |   3 +
 drivers/gpu/drm/verisilicon/vs_drv.h        |   4 +
 6 files changed, 1169 insertions(+)
 create mode 100644 drivers/gpu/drm/verisilicon/starfive_hdmi.c
 create mode 100644 drivers/gpu/drm/verisilicon/starfive_hdmi.h
drivers/gpu/drm/verisilicon/Kconfig +0 -0
index e10fa97635aa..122c786e3948 100644
@@ -11,3 +11,11 @@ config DRM_VERISILICON
 	  This driver provides VeriSilicon kernel mode

drivers/gpu/drm/verisilicon/Kconfig config DRM_VERISILICON · line 21

Quoted 10 lines
drivers/gpu/drm/verisilicon/Kconfig +8 -0
 	  setting and buffer management. It does not
 	  provide 2D or 3D acceleration.
+
+config DRM_VERISILICON_STARFIVE_HDMI
+	bool "Starfive HDMI extensions"
+	depends on DRM_VERISILICON
+	help
+	   This selects support for StarFive soc specific extensions
+	   for the Innosilicon HDMI driver. If you want to enable
+	   HDMI on JH7110 based soc, you should select this option.

I'm confused, is it a starfive or verisilicon IP?

Quoted 62 lines
drivers/gpu/drm/verisilicon/Makefile +1 -0
index bf6f2b7ee480..71fadafcee13 100644
@@ -6,4 +6,5 @@ vs_drm-objs := vs_dc_hw.o \
 		vs_drv.o \
 		vs_modeset.o \
 		vs_plane.o
+vs_drm-$(CONFIG_DRM_VERISILICON_STARFIVE_HDMI) += starfive_hdmi.o
 obj-$(CONFIG_DRM_VERISILICON) += vs_drm.o
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +46 -0
new file mode 100644
index 000000000000..aa621db0dee0
@@ -0,0 +1,849 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2023 StarFive Technology Co., Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/hdmi.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/media-bus-format.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+
+#include <drm/bridge/dw_hdmi.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_managed.h>
+#include <drm/drm_of.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
+
+#include "starfive_hdmi.h"
+#include "vs_drv.h"
+#include "vs_crtc.h"
+
+static const char * const hdmi_clocks[] = {
+	"sysclk",
+	"mclk",
+	"bclk"
+};
+
+static struct starfive_hdmi_encoder *encoder_to_hdmi(struct drm_encoder *encoder)
+{
+	return container_of(encoder, struct starfive_hdmi_encoder, encoder);
+}
+
+static struct starfive_hdmi *connector_to_hdmi(struct drm_connector *connector)
+{
+	return container_of(connector, struct starfive_hdmi, connector);

drivers/gpu/drm/verisilicon/starfive_hdmi.c line 56

Quoted 10 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +10 -0
+}
+
+static const struct post_pll_config post_pll_cfg_table[] = {
+	{25200000,	1, 80, 13, 3, 1},
+	{27000000,	1, 40, 11, 3, 1},
+	{33750000,	1, 40, 11, 3, 1},
+	{49000000,	1, 20, 1, 3, 3},
+	{241700000, 1, 20, 1, 3, 3},
+	{297000000, 4, 20, 0, 0, 3},
+	{594000000, 4, 20, 0, 0, 0},

If you don't support modes > 340MHz, then there's no point in listing 594MHz here

Quoted 217 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +217 -0
+	{ /* sentinel */ }
+};
+
+inline u8 hdmi_readb(struct starfive_hdmi *hdmi, u16 offset)
+{
+	return readl_relaxed(hdmi->regs + (offset) * 0x04);
+}
+
+inline void hdmi_writeb(struct starfive_hdmi *hdmi, u16 offset, u32 val)
+{
+	writel_relaxed(val, hdmi->regs + (offset) * 0x04);
+}
+
+inline void hdmi_writew(struct starfive_hdmi *hdmi, u16 offset, u32 val)
+{
+	writew_relaxed(val & 0xFF, hdmi->regs + (offset) * 0x04);
+	writew_relaxed((val >> 8) & 0xFF, hdmi->regs + (offset + 1) * 0x04);
+}
+
+inline void hdmi_modb(struct starfive_hdmi *hdmi, u16 offset,
+			     u32 msk, u32 val)
+{
+	u8 temp = hdmi_readb(hdmi, offset) & ~msk;
+
+	temp |= val & msk;
+	hdmi_writeb(hdmi, offset, temp);
+}
+
+static int starfive_hdmi_enable_clk_deassert_rst(struct device *dev, struct starfive_hdmi *hdmi)
+{
+	int ret;
+
+	ret = clk_bulk_prepare_enable(hdmi->nclks, hdmi->clk_hdmi);
+	if (ret) {
+		dev_err(dev, "failed to enable clocks\n");
+		return ret;
+	}
+
+	ret = reset_control_deassert(hdmi->tx_rst);
+	if (ret < 0) {
+		dev_err(dev, "failed to deassert tx_rst\n");
+		return ret;
+	}
+	return 0;
+}
+
+static void starfive_hdmi_disable_clk_assert_rst(struct device *dev, struct starfive_hdmi *hdmi)
+{
+	int ret;
+
+	ret = reset_control_assert(hdmi->tx_rst);
+	if (ret < 0)
+		dev_err(dev, "failed to assert tx_rst\n");
+
+	clk_bulk_disable_unprepare(hdmi->nclks, hdmi->clk_hdmi);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int hdmi_system_pm_suspend(struct device *dev)
+{
+	return pm_runtime_force_suspend(dev);
+}
+
+static int hdmi_system_pm_resume(struct device *dev)
+{
+	return pm_runtime_force_resume(dev);
+}
+#endif
+
+#ifdef CONFIG_PM
+static int hdmi_runtime_suspend(struct device *dev)
+{
+	struct starfive_hdmi *hdmi = dev_get_drvdata(dev);
+
+	starfive_hdmi_disable_clk_assert_rst(dev, hdmi);
+
+	return 0;
+}
+
+static int hdmi_runtime_resume(struct device *dev)
+{
+	struct starfive_hdmi *hdmi = dev_get_drvdata(dev);
+
+	return starfive_hdmi_enable_clk_deassert_rst(dev, hdmi);
+}
+#endif
+
+static void starfive_hdmi_tx_phy_power_down(struct starfive_hdmi *hdmi)
+{
+	hdmi_modb(hdmi, HDMI_SYS_CTRL, m_POWER, v_PWR_OFF);
+}
+
+static void starfive_hdmi_tx_phy_power_on(struct starfive_hdmi *hdmi)
+{
+	hdmi_modb(hdmi, HDMI_SYS_CTRL, m_POWER, v_PWR_ON);
+}
+
+static void starfive_hdmi_config_pll(struct starfive_hdmi *hdmi)
+{
+	u32 val;
+	u8 reg_1ad_value = hdmi->post_cfg->post_div_en ?
+		 hdmi->post_cfg->postdiv : 0x00;
+	u8 reg_1aa_value = hdmi->post_cfg->post_div_en ?
+		 0x0e : 0x02;
+
+	hdmi_writeb(hdmi, STARFIVE_PRE_PLL_CONTROL, STARFIVE_PRE_PLL_POWER_DOWN);
+	hdmi_writeb(hdmi, STARFIVE_POST_PLL_DIV_1,
+		    STARFIVE_POST_PLL_POST_DIV_ENABLE |
+		    STARFIVE_POST_PLL_REFCLK_SEL_TMDS |
+		    STARFIVE_POST_PLL_POWER_DOWN);
+	hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_1, STARFIVE_PRE_PLL_PRE_DIV(hdmi->pre_cfg.prediv));
+
+	val = STARFIVE_SPREAD_SPECTRUM_MOD_DISABLE | STARFIVE_SPREAD_SPECTRUM_MOD_DOWN;
+	if (!hdmi->pre_cfg.fracdiv)
+		val |= STARFIVE_PRE_PLL_FRAC_DIV_DISABLE;
+	hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_2,
+		    STARFIVE_PRE_PLL_FB_DIV_11_8(hdmi->pre_cfg.fbdiv) | val);
+	hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_3,
+		    STARFIVE_PRE_PLL_FB_DIV_7_0(hdmi->pre_cfg.fbdiv));
+	hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_4,
+		    STARFIVE_PRE_PLL_TMDSCLK_DIV_C(hdmi->pre_cfg.tmds_div_c) |
+		    STARFIVE_PRE_PLL_TMDSCLK_DIV_A(hdmi->pre_cfg.tmds_div_a) |
+		    STARFIVE_PRE_PLL_TMDSCLK_DIV_B(hdmi->pre_cfg.tmds_div_b));
+
+	if (hdmi->pre_cfg.fracdiv) {
+		hdmi_writeb(hdmi, STARFIVE_PRE_PLL_FRAC_DIV_L,
+			    STARFIVE_PRE_PLL_FRAC_DIV_7_0(hdmi->pre_cfg.fracdiv));
+		hdmi_writeb(hdmi, STARFIVE_PRE_PLL_FRAC_DIV_M,
+			    STARFIVE_PRE_PLL_FRAC_DIV_15_8(hdmi->pre_cfg.fracdiv));
+		hdmi_writeb(hdmi, STARFIVE_PRE_PLL_FRAC_DIV_H,
+			    STARFIVE_PRE_PLL_FRAC_DIV_23_16(hdmi->pre_cfg.fracdiv));
+	}
+
+	hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_5,
+		    STARFIVE_PRE_PLL_PCLK_DIV_A(hdmi->pre_cfg.pclk_div_a) |
+		    STARFIVE_PRE_PLL_PCLK_DIV_B(hdmi->pre_cfg.pclk_div_b));
+	hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_6,
+		    STARFIVE_PRE_PLL_PCLK_DIV_C(hdmi->pre_cfg.pclk_div_c) |
+		    STARFIVE_PRE_PLL_PCLK_DIV_D(hdmi->pre_cfg.pclk_div_d));
+
+	/*pre-pll power down*/
+	hdmi_modb(hdmi, STARFIVE_PRE_PLL_CONTROL, STARFIVE_PRE_PLL_POWER_DOWN, 0);
+
+	hdmi_modb(hdmi, STARFIVE_POST_PLL_DIV_2, STARFIVE_POST_PLL_Pre_DIV_MASK,
+		  STARFIVE_POST_PLL_PRE_DIV(hdmi->post_cfg->prediv));
+	hdmi_writeb(hdmi, STARFIVE_POST_PLL_DIV_3, hdmi->post_cfg->fbdiv & 0xff);
+	hdmi_writeb(hdmi, STARFIVE_POST_PLL_DIV_4, reg_1ad_value);
+	hdmi_writeb(hdmi, STARFIVE_POST_PLL_DIV_1, reg_1aa_value);
+}
+
+static void starfive_hdmi_tmds_driver_on(struct starfive_hdmi *hdmi)
+{
+	hdmi_modb(hdmi, STARFIVE_TMDS_CONTROL,
+		  STARFIVE_TMDS_DRIVER_ENABLE, STARFIVE_TMDS_DRIVER_ENABLE);
+}
+
+static void starfive_hdmi_sync_tmds(struct starfive_hdmi *hdmi)
+{
+	/*first send 0 to this bit, then send 1 and keep 1 into this bit*/
+	hdmi_writeb(hdmi, HDMI_SYNC, 0x0);
+	hdmi_writeb(hdmi, HDMI_SYNC, 0x1);
+}
+
+static void starfive_hdmi_i2c_init(struct starfive_hdmi *hdmi)
+{
+	int ddc_bus_freq;
+
+	ddc_bus_freq = (clk_get_rate(hdmi->clk_hdmi[CLK_SYS].clk) >> 2) / HDMI_SCL_RATE;
+
+	hdmi_writeb(hdmi, DDC_BUS_FREQ_L, ddc_bus_freq & 0xFF);
+	hdmi_writeb(hdmi, DDC_BUS_FREQ_H, (ddc_bus_freq >> 8) & 0xFF);
+
+	/* Clear the EDID interrupt flag and mute the interrupt */
+	hdmi_writeb(hdmi, HDMI_INTERRUPT_MASK1, 0);
+	hdmi_writeb(hdmi, HDMI_INTERRUPT_STATUS1, m_INT_EDID_READY);
+}
+
+static void starfive_hdmi_phy_get_pre_pll_cfg(struct starfive_hdmi *hdmi)
+{
+	if (hdmi->tmds_rate > 30000000) {
+		hdmi->pre_cfg.pixclock = hdmi->tmds_rate;
+		hdmi->pre_cfg.tmdsclock = hdmi->tmds_rate;
+		hdmi->pre_cfg.prediv = 1;
+		hdmi->pre_cfg.fbdiv = hdmi->tmds_rate / 3000000;
+		hdmi->pre_cfg.tmds_div_a = 0;
+		hdmi->pre_cfg.tmds_div_b = 1;
+		hdmi->pre_cfg.tmds_div_c = 1;
+		hdmi->pre_cfg.pclk_div_a = 1;
+		hdmi->pre_cfg.pclk_div_b = 0;
+		hdmi->pre_cfg.pclk_div_c = 2;
+		hdmi->pre_cfg.pclk_div_d = 2;
+		hdmi->pre_cfg.vco_div_5_en = hdmi->tmds_rate % 3000000 ? 1 : 0;
+
+		if (hdmi->pre_cfg.vco_div_5_en) {
+			hdmi->pre_cfg.fracdiv = (hdmi->tmds_rate % 3000000) *
+						 0xffffff / 1000000;
+		}
+	} else {
+		hdmi->pre_cfg.pixclock = hdmi->tmds_rate;
+		hdmi->pre_cfg.tmdsclock = hdmi->tmds_rate;
+		hdmi->pre_cfg.prediv = 1;
+		hdmi->pre_cfg.fbdiv = hdmi->tmds_rate / 1000000;
+		hdmi->pre_cfg.tmds_div_a = 2;
+		hdmi->pre_cfg.tmds_div_b = 1;
+		hdmi->pre_cfg.tmds_div_c = 1;
+		hdmi->pre_cfg.pclk_div_a = 3;
+		hdmi->pre_cfg.pclk_div_b = 0;
+		hdmi->pre_cfg.pclk_div_c = 3;
+		hdmi->pre_cfg.pclk_div_d = 4;
+		hdmi->pre_cfg.vco_div_5_en = hdmi->tmds_rate % 1000000 ? 1 : 0;
+
+		if (hdmi->pre_cfg.vco_div_5_en) {
+			hdmi->pre_cfg.fracdiv = (hdmi->tmds_rate % 1000000) *
+						 0xffffff / 1000000;
+		}
+	}
+}

drivers/gpu/drm/verisilicon/starfive_hdmi.c line 283

Quoted 10 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +10 -0
+
+static int starfive_hdmi_phy_clk_set_rate(struct starfive_hdmi *hdmi)
+{
+	hdmi->post_cfg = post_pll_cfg_table;
+
+	starfive_hdmi_phy_get_pre_pll_cfg(hdmi);
+
+	for (; hdmi->post_cfg->tmdsclock != 0; hdmi->post_cfg++)
+		if (hdmi->tmds_rate <= hdmi->post_cfg->tmdsclock)
+			break;

What happens if you don't find a mode?

Quoted 48 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +48 -0
+	starfive_hdmi_config_pll(hdmi);
+
+	return 0;
+}
+
+static int starfive_hdmi_config_video_timing(struct starfive_hdmi *hdmi,
+					     struct drm_display_mode *mode)
+{
+	int value;
+	/* Set detail external video timing */
+	value = mode->htotal;
+	hdmi_writew(hdmi, HDMI_VIDEO_EXT_HTOTAL_L, value);
+
+	value = mode->htotal - mode->hdisplay;
+	hdmi_writew(hdmi, HDMI_VIDEO_EXT_HBLANK_L, value);
+
+	value = mode->htotal - mode->hsync_start;
+	hdmi_writew(hdmi, HDMI_VIDEO_EXT_HDELAY_L, value);
+
+	value = mode->hsync_end - mode->hsync_start;
+	hdmi_writew(hdmi, HDMI_VIDEO_EXT_HDURATION_L, value);
+
+	value = mode->vtotal;
+	hdmi_writew(hdmi, HDMI_VIDEO_EXT_VTOTAL_L, value);
+
+	value = mode->vtotal - mode->vdisplay;
+	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_VBLANK, value & 0xFF);
+
+	value = mode->vtotal - mode->vsync_start;
+	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_VDELAY, value & 0xFF);
+
+	value = mode->vsync_end - mode->vsync_start;
+	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_VDURATION, value & 0xFF);
+
+	/* Set detail external video timing polarity and interlace mode */
+	value = v_EXTERANL_VIDEO(1);
+	value |= mode->flags & DRM_MODE_FLAG_PHSYNC ?
+		v_HSYNC_POLARITY(1) : v_HSYNC_POLARITY(0);
+	value |= mode->flags & DRM_MODE_FLAG_PVSYNC ?
+		v_VSYNC_POLARITY(1) : v_VSYNC_POLARITY(0);
+	value |= mode->flags & DRM_MODE_FLAG_INTERLACE ?
+		v_INETLACE(1) : v_INETLACE(0);
+
+	hdmi_writeb(hdmi, HDMI_VIDEO_TIMING_CTL, value);
+	return 0;
+}
+
+static int starfive_hdmi_setup(struct starfive_hdmi *hdmi,

drivers/gpu/drm/verisilicon/starfive_hdmi.c line 342

Quoted 10 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +10 -0
+			       struct drm_display_mode *mode)
+{
+	int ret;
+	u32 val;
+
+	hdmi_modb(hdmi, STARFIVE_BIAS_CONTROL, STARFIVE_BIAS_ENABLE, STARFIVE_BIAS_ENABLE);
+	hdmi_writeb(hdmi, STARFIVE_RX_CONTROL, STARFIVE_RX_ENABLE);
+
+	hdmi->tmds_rate = mode->clock * 1000;
+	starfive_hdmi_phy_clk_set_rate(hdmi);

The calculation is more complicated than that, see
https://lore.kernel.org/dri-devel/[email protected]/

Quoted 39 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +39 -0
+	ret = readx_poll_timeout(readl_relaxed,
+				 hdmi->regs + (STARFIVE_PRE_PLL_LOCK_STATUS) * 0x04,
+				 val, val & 0x1, 1000, 100000);
+	if (ret < 0) {
+		dev_err(hdmi->dev, "failed to wait pre-pll lock\n");
+		return ret;
+	}
+
+	ret = readx_poll_timeout(readl_relaxed,
+				 hdmi->regs + (STARFIVE_POST_PLL_LOCK_STATUS) * 0x04,
+				 val, val & 0x1, 1000, 100000);
+	if (ret < 0) {
+		dev_err(hdmi->dev, "failed to wait post-pll lock\n");
+		return ret;
+	}
+
+	/*turn on LDO*/
+	hdmi_writeb(hdmi, STARFIVE_LDO_CONTROL, STARFIVE_LDO_ENABLE);
+	/*turn on serializer*/
+	hdmi_writeb(hdmi, STARFIVE_SERIALIER_CONTROL, STARFIVE_SERIALIER_ENABLE);
+
+	starfive_hdmi_tx_phy_power_down(hdmi);
+	starfive_hdmi_config_video_timing(hdmi, mode);
+	starfive_hdmi_tx_phy_power_on(hdmi);
+
+	starfive_hdmi_tmds_driver_on(hdmi);
+	starfive_hdmi_sync_tmds(hdmi);
+
+	return 0;
+}
+
+static void starfive_hdmi_encoder_enable(struct drm_encoder *encoder)
+{
+	struct starfive_hdmi_encoder *hdmi_encoder = encoder_to_hdmi(encoder);
+	struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
+	int ret, idx;
+	struct drm_device *drm = hdmi_encoder->hdmi->connector.dev;
+
+	if (drm && !drm_dev_enter(drm, &idx))

drivers/gpu/drm/verisilicon/starfive_hdmi.c line 392

Quoted 10 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +10 -0
+		return;
+
+	ret = pm_runtime_get_sync(hdmi_encoder->hdmi->dev);
+	if (ret < 0)
+		return;
+	starfive_hdmi_setup(hdmi_encoder->hdmi, mode);
+
+	if (drm)
+		drm_dev_exit(idx);
+}

You're not sending any infoframes?

Quoted 10 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +10 -0
+static void starfive_hdmi_encoder_disable(struct drm_encoder *encoder)
+{
+	struct starfive_hdmi_encoder *hdmi_encoder = encoder_to_hdmi(encoder);
+
+	pm_runtime_put(hdmi_encoder->hdmi->dev);
+}
+
+static int
+starfive_hdmi_encoder_atomic_check(struct drm_encoder *encoder,
+				   struct drm_crtc_state *crtc_state,

drivers/gpu/drm/verisilicon/starfive_hdmi.c line 413

Quoted 10 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +10 -0
+				   struct drm_connector_state *conn_state)
+{
+	bool valid = false;
+	struct drm_display_mode *mode = &crtc_state->adjusted_mode;
+	struct vs_crtc_state *vs_crtc_state = to_vs_crtc_state(crtc_state);
+
+	vs_crtc_state->encoder_type = encoder->encoder_type;
+	vs_crtc_state->output_fmt = MEDIA_BUS_FMT_RGB888_1X24;
+
+	int pclk = mode->clock * 1000;

That's a compiler warning.

drivers/gpu/drm/verisilicon/starfive_hdmi.c line 412

Quoted 2 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +2 -0
+	if (pclk <= PIXCLOCK_4K_30FPS)
+		valid = true;

if (pclk > PIXCLOCK_4K_30FPS)

	return -EINVAL;

?

Quoted 407 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +407 -0
+
+	return (valid) ? 0 : -EINVAL;
+}
+
+static const struct drm_encoder_helper_funcs starfive_hdmi_encoder_helper_funcs = {
+	.enable     = starfive_hdmi_encoder_enable,
+	.disable    = starfive_hdmi_encoder_disable,
+	.atomic_check = starfive_hdmi_encoder_atomic_check,
+};
+
+static enum drm_connector_status
+starfive_hdmi_connector_detect(struct drm_connector *connector, bool force)
+{
+	struct starfive_hdmi *hdmi = connector_to_hdmi(connector);
+	struct drm_device *drm = hdmi->connector.dev;
+	int ret;
+	int idx;
+
+	if (drm && !drm_dev_enter(drm, &idx))
+		return connector_status_disconnected;
+
+	ret = pm_runtime_get_sync(hdmi->dev);
+	if (ret < 0)
+		return ret;
+
+	ret = (hdmi_readb(hdmi, HDMI_STATUS) & m_HOTPLUG) ?
+		connector_status_connected : connector_status_disconnected;
+	pm_runtime_put(hdmi->dev);
+
+	if (drm)
+		drm_dev_exit(idx);
+
+	return ret;
+}
+
+static int starfive_hdmi_connector_get_modes(struct drm_connector *connector)
+{
+	struct starfive_hdmi *hdmi = connector_to_hdmi(connector);
+	int ret = 0;
+
+	if (!hdmi->ddc)
+		return 0;
+	ret = pm_runtime_get_sync(hdmi->dev);
+	if (ret < 0)
+		return ret;
+
+	ret = drm_connector_helper_get_modes_from_ddc(connector);
+	pm_runtime_put(hdmi->dev);
+
+	return ret;
+}
+
+static enum drm_mode_status
+starfive_hdmi_connector_mode_valid(struct drm_connector *connector,
+				   struct drm_display_mode *mode)
+{
+	int pclk = mode->clock * 1000;
+	bool valid = false;
+
+	if (pclk <= PIXCLOCK_4K_30FPS)
+		valid = true;
+
+	return (valid) ? MODE_OK : MODE_BAD;
+}
+
+static int
+starfive_hdmi_probe_single_connector_modes(struct drm_connector *connector,
+					   u32 maxX, u32 maxY)
+{
+	return drm_helper_probe_single_connector_modes(connector, 3840, 2160);
+}
+
+static const struct drm_connector_funcs starfive_hdmi_connector_funcs = {
+	.fill_modes = starfive_hdmi_probe_single_connector_modes,
+	.detect = starfive_hdmi_connector_detect,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static struct drm_connector_helper_funcs starfive_hdmi_connector_helper_funcs = {
+	.get_modes = starfive_hdmi_connector_get_modes,
+	.mode_valid = starfive_hdmi_connector_mode_valid,
+};
+
+static int starfive_hdmi_register(struct drm_device *drm,
+				  struct starfive_hdmi_encoder *hdmi_encoder)
+{
+	struct drm_encoder *encoder = &hdmi_encoder->encoder;
+	struct device *dev = hdmi_encoder->hdmi->dev;
+
+	encoder->possible_crtcs = drm_of_find_possible_crtcs(drm, dev->of_node);
+
+	/*
+	 * If we failed to find the CRTC(s) which this encoder is
+	 * supposed to be connected to, it's because the CRTC has
+	 * not been registered yet.  Defer probing, and hope that
+	 * the required CRTC is added later.
+	 */
+	if (encoder->possible_crtcs == 0)
+		return -EPROBE_DEFER;
+
+	drm_encoder_helper_add(encoder, &starfive_hdmi_encoder_helper_funcs);
+
+	hdmi_encoder->hdmi->connector.polled = DRM_CONNECTOR_POLL_HPD;
+
+	drm_connector_helper_add(&hdmi_encoder->hdmi->connector,
+				 &starfive_hdmi_connector_helper_funcs);
+	drmm_connector_init(drm, &hdmi_encoder->hdmi->connector,
+			    &starfive_hdmi_connector_funcs,
+			    DRM_MODE_CONNECTOR_HDMIA,
+			    hdmi_encoder->hdmi->ddc);
+
+	drm_connector_attach_encoder(&hdmi_encoder->hdmi->connector, encoder);
+
+	return 0;
+}
+
+static irqreturn_t starfive_hdmi_i2c_irq(struct starfive_hdmi *hdmi)
+{
+	struct starfive_hdmi_i2c *i2c = hdmi->i2c;
+	u8 stat;
+
+	stat = hdmi_readb(hdmi, HDMI_INTERRUPT_STATUS1);
+	if (!(stat & m_INT_EDID_READY))
+		return IRQ_NONE;
+
+	/* Clear HDMI EDID interrupt flag */
+	hdmi_writeb(hdmi, HDMI_INTERRUPT_STATUS1, m_INT_EDID_READY);
+
+	complete(&i2c->cmp);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t starfive_hdmi_hardirq(int irq, void *dev_id)
+{
+	struct starfive_hdmi *hdmi = dev_id;
+	irqreturn_t ret = IRQ_NONE;
+	u8 interrupt;
+
+	if (hdmi->i2c)
+		ret = starfive_hdmi_i2c_irq(hdmi);
+
+	interrupt = hdmi_readb(hdmi, HDMI_STATUS);
+	if (interrupt & m_INT_HOTPLUG) {
+		hdmi_modb(hdmi, HDMI_STATUS, m_INT_HOTPLUG, m_INT_HOTPLUG);
+		ret = IRQ_WAKE_THREAD;
+	}
+
+	return ret;
+}
+
+static irqreturn_t starfive_hdmi_irq(int irq, void *dev_id)
+{
+	struct starfive_hdmi *hdmi = dev_id;
+
+	drm_connector_helper_hpd_irq_event(&hdmi->connector);
+
+	return IRQ_HANDLED;
+}
+
+static int starfive_hdmi_i2c_read(struct starfive_hdmi *hdmi, struct i2c_msg *msgs)
+{
+	int length = msgs->len;
+	u8 *buf = msgs->buf;
+	int ret;
+
+	ret = wait_for_completion_timeout(&hdmi->i2c->cmp, HZ / 10);
+	if (!ret)
+		return -EAGAIN;
+
+	while (length--)
+		*buf++ = hdmi_readb(hdmi, HDMI_EDID_FIFO_ADDR);
+
+	return 0;
+}
+
+static int starfive_hdmi_i2c_write(struct starfive_hdmi *hdmi, struct i2c_msg *msgs)
+{
+	/*
+	 * The DDC module only support read EDID message, so
+	 * we assume that each word write to this i2c adapter
+	 * should be the offset of EDID word address.
+	 */
+	if (msgs->len != 1 ||
+	    (msgs->addr != DDC_ADDR && msgs->addr != DDC_SEGMENT_ADDR))
+		return -EINVAL;
+
+	reinit_completion(&hdmi->i2c->cmp);
+
+	if (msgs->addr == DDC_SEGMENT_ADDR)
+		hdmi->i2c->segment_addr = msgs->buf[0];
+	if (msgs->addr == DDC_ADDR)
+		hdmi->i2c->ddc_addr = msgs->buf[0];
+
+	/* Set edid fifo first addr */
+	hdmi_writeb(hdmi, HDMI_EDID_FIFO_OFFSET, 0x00);
+
+	/* Set edid word address 0x00/0x80 */
+	hdmi_writeb(hdmi, HDMI_EDID_WORD_ADDR, hdmi->i2c->ddc_addr);
+
+	/* Set edid segment pointer */
+	hdmi_writeb(hdmi, HDMI_EDID_SEGMENT_POINTER, hdmi->i2c->segment_addr);
+
+	return 0;
+}
+
+static int starfive_hdmi_i2c_xfer(struct i2c_adapter *adap,
+				  struct i2c_msg *msgs, int num)
+{
+	struct starfive_hdmi *hdmi = i2c_get_adapdata(adap);
+	struct starfive_hdmi_i2c *i2c = hdmi->i2c;
+	int i, ret = 0;
+
+	mutex_lock(&i2c->lock);
+
+	/* Clear the EDID interrupt flag and unmute the interrupt */
+	hdmi_writeb(hdmi, HDMI_INTERRUPT_MASK1, m_INT_EDID_READY);
+	hdmi_writeb(hdmi, HDMI_INTERRUPT_STATUS1, m_INT_EDID_READY);
+
+	for (i = 0; i < num; i++) {
+		DRM_DEV_DEBUG(hdmi->dev,
+			      "xfer: num: %d/%d, len: %d, flags: %#x\n",
+			      i + 1, num, msgs[i].len, msgs[i].flags);
+
+		if (msgs[i].flags & I2C_M_RD)
+			ret = starfive_hdmi_i2c_read(hdmi, &msgs[i]);
+		else
+			ret = starfive_hdmi_i2c_write(hdmi, &msgs[i]);
+
+		if (ret < 0)
+			break;
+	}
+
+	if (!ret)
+		ret = num;
+
+	/* Mute HDMI EDID interrupt */
+	hdmi_writeb(hdmi, HDMI_INTERRUPT_MASK1, 0);
+
+	mutex_unlock(&i2c->lock);
+
+	return ret;
+}
+
+static u32 starfive_hdmi_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm starfive_hdmi_algorithm = {
+	.master_xfer	= starfive_hdmi_i2c_xfer,
+	.functionality	= starfive_hdmi_i2c_func,
+};
+
+static struct i2c_adapter *starfive_hdmi_i2c_adapter(struct starfive_hdmi *hdmi)
+{
+	struct i2c_adapter *adap;
+	struct starfive_hdmi_i2c *i2c;
+	int ret;
+
+	i2c = devm_kzalloc(hdmi->dev, sizeof(*i2c), GFP_KERNEL);
+		if (!i2c)
+			return ERR_PTR(-ENOMEM);
+
+	mutex_init(&i2c->lock);
+	init_completion(&i2c->cmp);
+
+	adap = &i2c->adap;
+	adap->class = I2C_CLASS_DDC;
+	adap->owner = THIS_MODULE;
+	adap->dev.parent = hdmi->dev;
+	adap->algo = &starfive_hdmi_algorithm;
+	strscpy(adap->name, "Starfive HDMI", sizeof(adap->name));
+	i2c_set_adapdata(adap, hdmi);
+
+	ret = devm_i2c_add_adapter(hdmi->dev, adap);
+	if (ret) {
+		dev_warn(hdmi->dev, "cannot add %s I2C adapter\n", adap->name);
+		devm_kfree(hdmi->dev, i2c);
+		return ERR_PTR(ret);
+	}
+
+	hdmi->i2c = i2c;
+
+	DRM_DEV_INFO(hdmi->dev, "registered %s I2C bus driver success\n", adap->name);
+
+	return adap;
+}
+
+static int starfive_hdmi_get_clk_rst(struct device *dev, struct starfive_hdmi *hdmi)
+{
+	int ret;
+
+	hdmi->nclks = ARRAY_SIZE(hdmi->clk_hdmi);
+	for (int i = 0; i < hdmi->nclks; ++i)
+		hdmi->clk_hdmi[i].id = hdmi_clocks[i];
+
+	ret = devm_clk_bulk_get(dev, hdmi->nclks, hdmi->clk_hdmi);
+	if (ret) {
+		dev_err(dev, "Failed to get clk controls\n");
+		return ret;
+	}
+
+	hdmi->tx_rst = devm_reset_control_get_by_index(dev, 0);
+	if (IS_ERR(hdmi->tx_rst)) {
+		dev_err(dev, "failed to get tx_rst reset\n");
+		return PTR_ERR(hdmi->tx_rst);
+	}
+
+	return 0;
+}
+
+static int starfive_hdmi_bind(struct device *dev, struct device *master,
+			      void *data)
+{
+	struct drm_device *drm = dev_get_drvdata(master);
+	struct starfive_hdmi_encoder *hdmi_encoder;
+	int ret;
+
+	hdmi_encoder = drmm_simple_encoder_alloc(drm, struct starfive_hdmi_encoder,
+						 encoder, DRM_MODE_ENCODER_TMDS);
+	if (IS_ERR(hdmi_encoder))
+		return PTR_ERR(hdmi_encoder);
+
+	hdmi_encoder->hdmi = dev_get_drvdata(dev);
+	hdmi_encoder->hdmi->drm_dev = drm;
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret)
+		return ret;
+
+	starfive_hdmi_i2c_init(hdmi_encoder->hdmi);
+
+	ret = starfive_hdmi_register(drm, hdmi_encoder);
+	if (ret)
+		goto err_put_adapter;
+
+	/* Unmute hotplug interrupt */
+	hdmi_modb(hdmi_encoder->hdmi, HDMI_STATUS, m_MASK_INT_HOTPLUG, v_MASK_INT_HOTPLUG(1));
+
+	ret = devm_request_threaded_irq(dev, hdmi_encoder->hdmi->irq, starfive_hdmi_hardirq,
+					starfive_hdmi_irq, IRQF_SHARED,
+					dev_name(dev), hdmi_encoder->hdmi);
+	if (ret < 0)
+		goto err_put_adapter;
+
+	pm_runtime_put_sync(dev);
+
+	return 0;
+
+err_put_adapter:
+	i2c_put_adapter(hdmi_encoder->hdmi->ddc);
+	return ret;
+}
+
+static const struct component_ops starfive_hdmi_ops = {
+	.bind	= starfive_hdmi_bind,
+};
+
+static int starfive_hdmi_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct starfive_hdmi *hdmi;
+	struct resource *iores;
+
+	hdmi = devm_kzalloc(&pdev->dev, sizeof(*hdmi), GFP_KERNEL);
+	if (!hdmi)
+		return -ENOMEM;
+
+	dev_set_drvdata(&pdev->dev, hdmi);
+	hdmi->dev = &pdev->dev;
+
+	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hdmi->regs = devm_ioremap_resource(hdmi->dev, iores);
+	if (IS_ERR(hdmi->regs))
+		return PTR_ERR(hdmi->regs);
+
+	ret = starfive_hdmi_get_clk_rst(hdmi->dev, hdmi);
+	if (ret < 0)
+		return ret;
+
+	ret = devm_pm_runtime_enable(hdmi->dev);
+	if (ret)
+		return ret;
+
+	hdmi->irq = platform_get_irq(pdev, 0);
+	if (hdmi->irq < 0) {
+		ret = hdmi->irq;
+		return ret;
+	}
+
+	hdmi->ddc = starfive_hdmi_i2c_adapter(hdmi);
+	if (IS_ERR(hdmi->ddc)) {
+		ret = PTR_ERR(hdmi->ddc);
+		hdmi->ddc = NULL;
+		return ret;
+	}
+
+	return component_add(&pdev->dev, &starfive_hdmi_ops);
+}
+
+static int starfive_hdmi_remove(struct platform_device *pdev)
+{
+	component_del(&pdev->dev, &starfive_hdmi_ops);
+

drivers/gpu/drm/verisilicon/starfive_hdmi.c line 833

Quoted 10 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +10 -0
+	return 0;
+}
+
+static const struct dev_pm_ops hdmi_pm_ops = {
+	SET_RUNTIME_PM_OPS(hdmi_runtime_suspend, hdmi_runtime_resume, NULL)
+	SET_LATE_SYSTEM_SLEEP_PM_OPS(hdmi_system_pm_suspend, hdmi_system_pm_resume)
+};
+
+static const struct of_device_id starfive_hdmi_dt_ids[] = {
+	{ .compatible = "starfive,jh7110-inno-hdmi",},

So it's inno hdmi, just like Rockchip then?

This should be a common driver.
Maxime

author
#31 lore raw

Re: [v3 5/6] drm/vs: Add hdmi driver

Quoted 25 lines · Maxime Ripard
Quoted 24 lines · Keith Zhao

add hdmi driver as encoder and connect

---
 drivers/gpu/drm/verisilicon/Kconfig         |   8 +
 drivers/gpu/drm/verisilicon/Makefile        |   1 +
 drivers/gpu/drm/verisilicon/starfive_hdmi.c | 849 ++++++++++++++++++++
 drivers/gpu/drm/verisilicon/starfive_hdmi.h | 304 +++++++
 drivers/gpu/drm/verisilicon/vs_drv.c        |   3 +
 drivers/gpu/drm/verisilicon/vs_drv.h        |   4 +
 6 files changed, 1169 insertions(+)
 create mode 100644 drivers/gpu/drm/verisilicon/starfive_hdmi.c
 create mode 100644 drivers/gpu/drm/verisilicon/starfive_hdmi.h
drivers/gpu/drm/verisilicon/Kconfig +2 -0
index e10fa97635aa..122c786e3948 100644
@@ -11,3 +11,11 @@ config DRM_VERISILICON
 	  This driver provides VeriSilicon kernel mode
 	  setting and buffer management. It does not
 	  provide 2D or 3D acceleration.
+
+config DRM_VERISILICON_STARFIVE_HDMI
Quoted 8 lines

drivers/gpu/drm/verisilicon/Kconfig config DRM_VERISILICON · line 21

Quoted 6 lines
drivers/gpu/drm/verisilicon/Kconfig +6 -0
+	bool "Starfive HDMI extensions"
+	depends on DRM_VERISILICON
+	help
+	   This selects support for StarFive soc specific extensions
+	   for the Innosilicon HDMI driver. If you want to enable
+	   HDMI on JH7110 based soc, you should select this option.

I'm confused, is it a starfive or verisilicon IP?

it is Innosilicon ip ,I need describe it clearer in my next.

Quoted 67 lines
Quoted 67 lines
drivers/gpu/drm/verisilicon/Makefile +1 -0
index bf6f2b7ee480..71fadafcee13 100644
@@ -6,4 +6,5 @@ vs_drm-objs := vs_dc_hw.o \
 		vs_drv.o \
 		vs_modeset.o \
 		vs_plane.o
+vs_drm-$(CONFIG_DRM_VERISILICON_STARFIVE_HDMI) += starfive_hdmi.o
 obj-$(CONFIG_DRM_VERISILICON) += vs_drm.o
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +50 -0
new file mode 100644
index 000000000000..aa621db0dee0
@@ -0,0 +1,849 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2023 StarFive Technology Co., Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/hdmi.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/media-bus-format.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+
+#include <drm/bridge/dw_hdmi.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_managed.h>
+#include <drm/drm_of.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_simple_kms_helper.h>
+
+#include "starfive_hdmi.h"
+#include "vs_drv.h"
+#include "vs_crtc.h"
+
+static const char * const hdmi_clocks[] = {
+	"sysclk",
+	"mclk",
+	"bclk"
+};
+
+static struct starfive_hdmi_encoder *encoder_to_hdmi(struct drm_encoder *encoder)
+{
+	return container_of(encoder, struct starfive_hdmi_encoder, encoder);
+}
+
+static struct starfive_hdmi *connector_to_hdmi(struct drm_connector *connector)
+{
+	return container_of(connector, struct starfive_hdmi, connector);
+}
+
+static const struct post_pll_config post_pll_cfg_table[] = {
+	{25200000,	1, 80, 13, 3, 1},
Quoted 8 lines

drivers/gpu/drm/verisilicon/starfive_hdmi.c line 56

Quoted 6 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +6 -0
+	{27000000,	1, 40, 11, 3, 1},
+	{33750000,	1, 40, 11, 3, 1},
+	{49000000,	1, 20, 1, 3, 3},
+	{241700000, 1, 20, 1, 3, 3},
+	{297000000, 4, 20, 0, 0, 3},
+	{594000000, 4, 20, 0, 0, 0},

If you don't support modes > 340MHz, then there's no point in listing 594MHz here

sure . max should be 297M here.

Quoted 222 lines
Quoted 222 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +221 -0
+	{ /* sentinel */ }
+};
+
+inline u8 hdmi_readb(struct starfive_hdmi *hdmi, u16 offset)
+{
+	return readl_relaxed(hdmi->regs + (offset) * 0x04);
+}
+
+inline void hdmi_writeb(struct starfive_hdmi *hdmi, u16 offset, u32 val)
+{
+	writel_relaxed(val, hdmi->regs + (offset) * 0x04);
+}
+
+inline void hdmi_writew(struct starfive_hdmi *hdmi, u16 offset, u32 val)
+{
+	writew_relaxed(val & 0xFF, hdmi->regs + (offset) * 0x04);
+	writew_relaxed((val >> 8) & 0xFF, hdmi->regs + (offset + 1) * 0x04);
+}
+
+inline void hdmi_modb(struct starfive_hdmi *hdmi, u16 offset,
+			     u32 msk, u32 val)
+{
+	u8 temp = hdmi_readb(hdmi, offset) & ~msk;
+
+	temp |= val & msk;
+	hdmi_writeb(hdmi, offset, temp);
+}
+
+static int starfive_hdmi_enable_clk_deassert_rst(struct device *dev, struct starfive_hdmi *hdmi)
+{
+	int ret;
+
+	ret = clk_bulk_prepare_enable(hdmi->nclks, hdmi->clk_hdmi);
+	if (ret) {
+		dev_err(dev, "failed to enable clocks\n");
+		return ret;
+	}
+
+	ret = reset_control_deassert(hdmi->tx_rst);
+	if (ret < 0) {
+		dev_err(dev, "failed to deassert tx_rst\n");
+		return ret;
+	}
+	return 0;
+}
+
+static void starfive_hdmi_disable_clk_assert_rst(struct device *dev, struct starfive_hdmi *hdmi)
+{
+	int ret;
+
+	ret = reset_control_assert(hdmi->tx_rst);
+	if (ret < 0)
+		dev_err(dev, "failed to assert tx_rst\n");
+
+	clk_bulk_disable_unprepare(hdmi->nclks, hdmi->clk_hdmi);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int hdmi_system_pm_suspend(struct device *dev)
+{
+	return pm_runtime_force_suspend(dev);
+}
+
+static int hdmi_system_pm_resume(struct device *dev)
+{
+	return pm_runtime_force_resume(dev);
+}
+#endif
+
+#ifdef CONFIG_PM
+static int hdmi_runtime_suspend(struct device *dev)
+{
+	struct starfive_hdmi *hdmi = dev_get_drvdata(dev);
+
+	starfive_hdmi_disable_clk_assert_rst(dev, hdmi);
+
+	return 0;
+}
+
+static int hdmi_runtime_resume(struct device *dev)
+{
+	struct starfive_hdmi *hdmi = dev_get_drvdata(dev);
+
+	return starfive_hdmi_enable_clk_deassert_rst(dev, hdmi);
+}
+#endif
+
+static void starfive_hdmi_tx_phy_power_down(struct starfive_hdmi *hdmi)
+{
+	hdmi_modb(hdmi, HDMI_SYS_CTRL, m_POWER, v_PWR_OFF);
+}
+
+static void starfive_hdmi_tx_phy_power_on(struct starfive_hdmi *hdmi)
+{
+	hdmi_modb(hdmi, HDMI_SYS_CTRL, m_POWER, v_PWR_ON);
+}
+
+static void starfive_hdmi_config_pll(struct starfive_hdmi *hdmi)
+{
+	u32 val;
+	u8 reg_1ad_value = hdmi->post_cfg->post_div_en ?
+		 hdmi->post_cfg->postdiv : 0x00;
+	u8 reg_1aa_value = hdmi->post_cfg->post_div_en ?
+		 0x0e : 0x02;
+
+	hdmi_writeb(hdmi, STARFIVE_PRE_PLL_CONTROL, STARFIVE_PRE_PLL_POWER_DOWN);
+	hdmi_writeb(hdmi, STARFIVE_POST_PLL_DIV_1,
+		    STARFIVE_POST_PLL_POST_DIV_ENABLE |
+		    STARFIVE_POST_PLL_REFCLK_SEL_TMDS |
+		    STARFIVE_POST_PLL_POWER_DOWN);
+	hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_1, STARFIVE_PRE_PLL_PRE_DIV(hdmi->pre_cfg.prediv));
+
+	val = STARFIVE_SPREAD_SPECTRUM_MOD_DISABLE | STARFIVE_SPREAD_SPECTRUM_MOD_DOWN;
+	if (!hdmi->pre_cfg.fracdiv)
+		val |= STARFIVE_PRE_PLL_FRAC_DIV_DISABLE;
+	hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_2,
+		    STARFIVE_PRE_PLL_FB_DIV_11_8(hdmi->pre_cfg.fbdiv) | val);
+	hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_3,
+		    STARFIVE_PRE_PLL_FB_DIV_7_0(hdmi->pre_cfg.fbdiv));
+	hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_4,
+		    STARFIVE_PRE_PLL_TMDSCLK_DIV_C(hdmi->pre_cfg.tmds_div_c) |
+		    STARFIVE_PRE_PLL_TMDSCLK_DIV_A(hdmi->pre_cfg.tmds_div_a) |
+		    STARFIVE_PRE_PLL_TMDSCLK_DIV_B(hdmi->pre_cfg.tmds_div_b));
+
+	if (hdmi->pre_cfg.fracdiv) {
+		hdmi_writeb(hdmi, STARFIVE_PRE_PLL_FRAC_DIV_L,
+			    STARFIVE_PRE_PLL_FRAC_DIV_7_0(hdmi->pre_cfg.fracdiv));
+		hdmi_writeb(hdmi, STARFIVE_PRE_PLL_FRAC_DIV_M,
+			    STARFIVE_PRE_PLL_FRAC_DIV_15_8(hdmi->pre_cfg.fracdiv));
+		hdmi_writeb(hdmi, STARFIVE_PRE_PLL_FRAC_DIV_H,
+			    STARFIVE_PRE_PLL_FRAC_DIV_23_16(hdmi->pre_cfg.fracdiv));
+	}
+
+	hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_5,
+		    STARFIVE_PRE_PLL_PCLK_DIV_A(hdmi->pre_cfg.pclk_div_a) |
+		    STARFIVE_PRE_PLL_PCLK_DIV_B(hdmi->pre_cfg.pclk_div_b));
+	hdmi_writeb(hdmi, STARFIVE_PRE_PLL_DIV_6,
+		    STARFIVE_PRE_PLL_PCLK_DIV_C(hdmi->pre_cfg.pclk_div_c) |
+		    STARFIVE_PRE_PLL_PCLK_DIV_D(hdmi->pre_cfg.pclk_div_d));
+
+	/*pre-pll power down*/
+	hdmi_modb(hdmi, STARFIVE_PRE_PLL_CONTROL, STARFIVE_PRE_PLL_POWER_DOWN, 0);
+
+	hdmi_modb(hdmi, STARFIVE_POST_PLL_DIV_2, STARFIVE_POST_PLL_Pre_DIV_MASK,
+		  STARFIVE_POST_PLL_PRE_DIV(hdmi->post_cfg->prediv));
+	hdmi_writeb(hdmi, STARFIVE_POST_PLL_DIV_3, hdmi->post_cfg->fbdiv & 0xff);
+	hdmi_writeb(hdmi, STARFIVE_POST_PLL_DIV_4, reg_1ad_value);
+	hdmi_writeb(hdmi, STARFIVE_POST_PLL_DIV_1, reg_1aa_value);
+}
+
+static void starfive_hdmi_tmds_driver_on(struct starfive_hdmi *hdmi)
+{
+	hdmi_modb(hdmi, STARFIVE_TMDS_CONTROL,
+		  STARFIVE_TMDS_DRIVER_ENABLE, STARFIVE_TMDS_DRIVER_ENABLE);
+}
+
+static void starfive_hdmi_sync_tmds(struct starfive_hdmi *hdmi)
+{
+	/*first send 0 to this bit, then send 1 and keep 1 into this bit*/
+	hdmi_writeb(hdmi, HDMI_SYNC, 0x0);
+	hdmi_writeb(hdmi, HDMI_SYNC, 0x1);
+}
+
+static void starfive_hdmi_i2c_init(struct starfive_hdmi *hdmi)
+{
+	int ddc_bus_freq;
+
+	ddc_bus_freq = (clk_get_rate(hdmi->clk_hdmi[CLK_SYS].clk) >> 2) / HDMI_SCL_RATE;
+
+	hdmi_writeb(hdmi, DDC_BUS_FREQ_L, ddc_bus_freq & 0xFF);
+	hdmi_writeb(hdmi, DDC_BUS_FREQ_H, (ddc_bus_freq >> 8) & 0xFF);
+
+	/* Clear the EDID interrupt flag and mute the interrupt */
+	hdmi_writeb(hdmi, HDMI_INTERRUPT_MASK1, 0);
+	hdmi_writeb(hdmi, HDMI_INTERRUPT_STATUS1, m_INT_EDID_READY);
+}
+
+static void starfive_hdmi_phy_get_pre_pll_cfg(struct starfive_hdmi *hdmi)
+{
+	if (hdmi->tmds_rate > 30000000) {
+		hdmi->pre_cfg.pixclock = hdmi->tmds_rate;
+		hdmi->pre_cfg.tmdsclock = hdmi->tmds_rate;
+		hdmi->pre_cfg.prediv = 1;
+		hdmi->pre_cfg.fbdiv = hdmi->tmds_rate / 3000000;
+		hdmi->pre_cfg.tmds_div_a = 0;
+		hdmi->pre_cfg.tmds_div_b = 1;
+		hdmi->pre_cfg.tmds_div_c = 1;
+		hdmi->pre_cfg.pclk_div_a = 1;
+		hdmi->pre_cfg.pclk_div_b = 0;
+		hdmi->pre_cfg.pclk_div_c = 2;
+		hdmi->pre_cfg.pclk_div_d = 2;
+		hdmi->pre_cfg.vco_div_5_en = hdmi->tmds_rate % 3000000 ? 1 : 0;
+
+		if (hdmi->pre_cfg.vco_div_5_en) {
+			hdmi->pre_cfg.fracdiv = (hdmi->tmds_rate % 3000000) *
+						 0xffffff / 1000000;
+		}
+	} else {
+		hdmi->pre_cfg.pixclock = hdmi->tmds_rate;
+		hdmi->pre_cfg.tmdsclock = hdmi->tmds_rate;
+		hdmi->pre_cfg.prediv = 1;
+		hdmi->pre_cfg.fbdiv = hdmi->tmds_rate / 1000000;
+		hdmi->pre_cfg.tmds_div_a = 2;
+		hdmi->pre_cfg.tmds_div_b = 1;
+		hdmi->pre_cfg.tmds_div_c = 1;
+		hdmi->pre_cfg.pclk_div_a = 3;
+		hdmi->pre_cfg.pclk_div_b = 0;
+		hdmi->pre_cfg.pclk_div_c = 3;
+		hdmi->pre_cfg.pclk_div_d = 4;
+		hdmi->pre_cfg.vco_div_5_en = hdmi->tmds_rate % 1000000 ? 1 : 0;
+
+		if (hdmi->pre_cfg.vco_div_5_en) {
+			hdmi->pre_cfg.fracdiv = (hdmi->tmds_rate % 1000000) *
+						 0xffffff / 1000000;
+		}
+	}
+}
+
+static int starfive_hdmi_phy_clk_set_rate(struct starfive_hdmi *hdmi)
+{
+	hdmi->post_cfg = post_pll_cfg_table;
Quoted 8 lines

drivers/gpu/drm/verisilicon/starfive_hdmi.c line 283

Quoted 6 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +6 -0
+
+	starfive_hdmi_phy_get_pre_pll_cfg(hdmi);
+
+	for (; hdmi->post_cfg->tmdsclock != 0; hdmi->post_cfg++)
+		if (hdmi->tmds_rate <= hdmi->post_cfg->tmdsclock)
+			break;

What happens if you don't find a mode?

hdmi->tmds_rate max value is 297M and hdmi->tmds_rate table also 297M (after delete 594M) it can find a mode always.

Quoted 54 lines
Quoted 54 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +53 -0
+	starfive_hdmi_config_pll(hdmi);
+
+	return 0;
+}
+
+static int starfive_hdmi_config_video_timing(struct starfive_hdmi *hdmi,
+					     struct drm_display_mode *mode)
+{
+	int value;
+	/* Set detail external video timing */
+	value = mode->htotal;
+	hdmi_writew(hdmi, HDMI_VIDEO_EXT_HTOTAL_L, value);
+
+	value = mode->htotal - mode->hdisplay;
+	hdmi_writew(hdmi, HDMI_VIDEO_EXT_HBLANK_L, value);
+
+	value = mode->htotal - mode->hsync_start;
+	hdmi_writew(hdmi, HDMI_VIDEO_EXT_HDELAY_L, value);
+
+	value = mode->hsync_end - mode->hsync_start;
+	hdmi_writew(hdmi, HDMI_VIDEO_EXT_HDURATION_L, value);
+
+	value = mode->vtotal;
+	hdmi_writew(hdmi, HDMI_VIDEO_EXT_VTOTAL_L, value);
+
+	value = mode->vtotal - mode->vdisplay;
+	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_VBLANK, value & 0xFF);
+
+	value = mode->vtotal - mode->vsync_start;
+	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_VDELAY, value & 0xFF);
+
+	value = mode->vsync_end - mode->vsync_start;
+	hdmi_writeb(hdmi, HDMI_VIDEO_EXT_VDURATION, value & 0xFF);
+
+	/* Set detail external video timing polarity and interlace mode */
+	value = v_EXTERANL_VIDEO(1);
+	value |= mode->flags & DRM_MODE_FLAG_PHSYNC ?
+		v_HSYNC_POLARITY(1) : v_HSYNC_POLARITY(0);
+	value |= mode->flags & DRM_MODE_FLAG_PVSYNC ?
+		v_VSYNC_POLARITY(1) : v_VSYNC_POLARITY(0);
+	value |= mode->flags & DRM_MODE_FLAG_INTERLACE ?
+		v_INETLACE(1) : v_INETLACE(0);
+
+	hdmi_writeb(hdmi, HDMI_VIDEO_TIMING_CTL, value);
+	return 0;
+}
+
+static int starfive_hdmi_setup(struct starfive_hdmi *hdmi,
+			       struct drm_display_mode *mode)
+{
+	int ret;
+	u32 val;
+
Quoted 8 lines

drivers/gpu/drm/verisilicon/starfive_hdmi.c line 342

Quoted 5 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +5 -0
+	hdmi_modb(hdmi, STARFIVE_BIAS_CONTROL, STARFIVE_BIAS_ENABLE, STARFIVE_BIAS_ENABLE);
+	hdmi_writeb(hdmi, STARFIVE_RX_CONTROL, STARFIVE_RX_ENABLE);
+
+	hdmi->tmds_rate = mode->clock * 1000;
+	starfive_hdmi_phy_clk_set_rate(hdmi);

The calculation is more complicated than that, see
https://lore.kernel.org/dri-devel/[email protected]/

drm_connector_hdmi_compute_mode_clock is a good helper to update my modeclock, I will match it accordding used hdmi_colorspace

Quoted 44 lines
Quoted 44 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +43 -0
+	ret = readx_poll_timeout(readl_relaxed,
+				 hdmi->regs + (STARFIVE_PRE_PLL_LOCK_STATUS) * 0x04,
+				 val, val & 0x1, 1000, 100000);
+	if (ret < 0) {
+		dev_err(hdmi->dev, "failed to wait pre-pll lock\n");
+		return ret;
+	}
+
+	ret = readx_poll_timeout(readl_relaxed,
+				 hdmi->regs + (STARFIVE_POST_PLL_LOCK_STATUS) * 0x04,
+				 val, val & 0x1, 1000, 100000);
+	if (ret < 0) {
+		dev_err(hdmi->dev, "failed to wait post-pll lock\n");
+		return ret;
+	}
+
+	/*turn on LDO*/
+	hdmi_writeb(hdmi, STARFIVE_LDO_CONTROL, STARFIVE_LDO_ENABLE);
+	/*turn on serializer*/
+	hdmi_writeb(hdmi, STARFIVE_SERIALIER_CONTROL, STARFIVE_SERIALIER_ENABLE);
+
+	starfive_hdmi_tx_phy_power_down(hdmi);
+	starfive_hdmi_config_video_timing(hdmi, mode);
+	starfive_hdmi_tx_phy_power_on(hdmi);
+
+	starfive_hdmi_tmds_driver_on(hdmi);
+	starfive_hdmi_sync_tmds(hdmi);
+
+	return 0;
+}
+
+static void starfive_hdmi_encoder_enable(struct drm_encoder *encoder)
+{
+	struct starfive_hdmi_encoder *hdmi_encoder = encoder_to_hdmi(encoder);
+	struct drm_display_mode *mode = &encoder->crtc->state->adjusted_mode;
+	int ret, idx;
+	struct drm_device *drm = hdmi_encoder->hdmi->connector.dev;
+
+	if (drm && !drm_dev_enter(drm, &idx))
+		return;
+
+	ret = pm_runtime_get_sync(hdmi_encoder->hdmi->dev);
+	if (ret < 0)
Quoted 8 lines

drivers/gpu/drm/verisilicon/starfive_hdmi.c line 392

Quoted 6 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +6 -0
+		return;
+	starfive_hdmi_setup(hdmi_encoder->hdmi, mode);
+
+	if (drm)
+		drm_dev_exit(idx);
+}

You're not sending any infoframes?

there is 2 way to modeset the hdmi driver
1、send infoframes to hdmi display , and config the vic to the hardware ,
no need to care the mode timing parameters,
but the hareware support vic list:
01/02/04/05/06/16/17/19/31/32/93/94/95/96/97/98/100/101/102 so final the plan was abandoned

2、get mode timing parameters and config them to hardware
no need care the vic value, this will support most of resolutions,so no sending any infoframe.

Considering the integrity of the HDMI protocol, is this send infoframes necessary?

Quoted 24 lines
Quoted 11 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +10 -0
+static void starfive_hdmi_encoder_disable(struct drm_encoder *encoder)
+{
+	struct starfive_hdmi_encoder *hdmi_encoder = encoder_to_hdmi(encoder);
+
+	pm_runtime_put(hdmi_encoder->hdmi->dev);
+}
+
+static int
+starfive_hdmi_encoder_atomic_check(struct drm_encoder *encoder,
+				   struct drm_crtc_state *crtc_state,

drivers/gpu/drm/verisilicon/starfive_hdmi.c line 413

Quoted 10 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +10 -0
+				   struct drm_connector_state *conn_state)
+{
+	bool valid = false;
+	struct drm_display_mode *mode = &crtc_state->adjusted_mode;
+	struct vs_crtc_state *vs_crtc_state = to_vs_crtc_state(crtc_state);
+
+	vs_crtc_state->encoder_type = encoder->encoder_type;
+	vs_crtc_state->output_fmt = MEDIA_BUS_FMT_RGB888_1X24;
+
+	int pclk = mode->clock * 1000;

That's a compiler warning.

Quoted 7 lines

drivers/gpu/drm/verisilicon/starfive_hdmi.c line 412

Quoted 2 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +2 -0
+	if (pclk <= PIXCLOCK_4K_30FPS)
+		valid = true;

if (pclk > PIXCLOCK_4K_30FPS)

	return -EINVAL;

?

en , it seems clearer.

Quoted 421 lines
Quoted 408 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +407 -0
+
+	return (valid) ? 0 : -EINVAL;
+}
+
+static const struct drm_encoder_helper_funcs starfive_hdmi_encoder_helper_funcs = {
+	.enable     = starfive_hdmi_encoder_enable,
+	.disable    = starfive_hdmi_encoder_disable,
+	.atomic_check = starfive_hdmi_encoder_atomic_check,
+};
+
+static enum drm_connector_status
+starfive_hdmi_connector_detect(struct drm_connector *connector, bool force)
+{
+	struct starfive_hdmi *hdmi = connector_to_hdmi(connector);
+	struct drm_device *drm = hdmi->connector.dev;
+	int ret;
+	int idx;
+
+	if (drm && !drm_dev_enter(drm, &idx))
+		return connector_status_disconnected;
+
+	ret = pm_runtime_get_sync(hdmi->dev);
+	if (ret < 0)
+		return ret;
+
+	ret = (hdmi_readb(hdmi, HDMI_STATUS) & m_HOTPLUG) ?
+		connector_status_connected : connector_status_disconnected;
+	pm_runtime_put(hdmi->dev);
+
+	if (drm)
+		drm_dev_exit(idx);
+
+	return ret;
+}
+
+static int starfive_hdmi_connector_get_modes(struct drm_connector *connector)
+{
+	struct starfive_hdmi *hdmi = connector_to_hdmi(connector);
+	int ret = 0;
+
+	if (!hdmi->ddc)
+		return 0;
+	ret = pm_runtime_get_sync(hdmi->dev);
+	if (ret < 0)
+		return ret;
+
+	ret = drm_connector_helper_get_modes_from_ddc(connector);
+	pm_runtime_put(hdmi->dev);
+
+	return ret;
+}
+
+static enum drm_mode_status
+starfive_hdmi_connector_mode_valid(struct drm_connector *connector,
+				   struct drm_display_mode *mode)
+{
+	int pclk = mode->clock * 1000;
+	bool valid = false;
+
+	if (pclk <= PIXCLOCK_4K_30FPS)
+		valid = true;
+
+	return (valid) ? MODE_OK : MODE_BAD;
+}
+
+static int
+starfive_hdmi_probe_single_connector_modes(struct drm_connector *connector,
+					   u32 maxX, u32 maxY)
+{
+	return drm_helper_probe_single_connector_modes(connector, 3840, 2160);
+}
+
+static const struct drm_connector_funcs starfive_hdmi_connector_funcs = {
+	.fill_modes = starfive_hdmi_probe_single_connector_modes,
+	.detect = starfive_hdmi_connector_detect,
+	.reset = drm_atomic_helper_connector_reset,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+};
+
+static struct drm_connector_helper_funcs starfive_hdmi_connector_helper_funcs = {
+	.get_modes = starfive_hdmi_connector_get_modes,
+	.mode_valid = starfive_hdmi_connector_mode_valid,
+};
+
+static int starfive_hdmi_register(struct drm_device *drm,
+				  struct starfive_hdmi_encoder *hdmi_encoder)
+{
+	struct drm_encoder *encoder = &hdmi_encoder->encoder;
+	struct device *dev = hdmi_encoder->hdmi->dev;
+
+	encoder->possible_crtcs = drm_of_find_possible_crtcs(drm, dev->of_node);
+
+	/*
+	 * If we failed to find the CRTC(s) which this encoder is
+	 * supposed to be connected to, it's because the CRTC has
+	 * not been registered yet.  Defer probing, and hope that
+	 * the required CRTC is added later.
+	 */
+	if (encoder->possible_crtcs == 0)
+		return -EPROBE_DEFER;
+
+	drm_encoder_helper_add(encoder, &starfive_hdmi_encoder_helper_funcs);
+
+	hdmi_encoder->hdmi->connector.polled = DRM_CONNECTOR_POLL_HPD;
+
+	drm_connector_helper_add(&hdmi_encoder->hdmi->connector,
+				 &starfive_hdmi_connector_helper_funcs);
+	drmm_connector_init(drm, &hdmi_encoder->hdmi->connector,
+			    &starfive_hdmi_connector_funcs,
+			    DRM_MODE_CONNECTOR_HDMIA,
+			    hdmi_encoder->hdmi->ddc);
+
+	drm_connector_attach_encoder(&hdmi_encoder->hdmi->connector, encoder);
+
+	return 0;
+}
+
+static irqreturn_t starfive_hdmi_i2c_irq(struct starfive_hdmi *hdmi)
+{
+	struct starfive_hdmi_i2c *i2c = hdmi->i2c;
+	u8 stat;
+
+	stat = hdmi_readb(hdmi, HDMI_INTERRUPT_STATUS1);
+	if (!(stat & m_INT_EDID_READY))
+		return IRQ_NONE;
+
+	/* Clear HDMI EDID interrupt flag */
+	hdmi_writeb(hdmi, HDMI_INTERRUPT_STATUS1, m_INT_EDID_READY);
+
+	complete(&i2c->cmp);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t starfive_hdmi_hardirq(int irq, void *dev_id)
+{
+	struct starfive_hdmi *hdmi = dev_id;
+	irqreturn_t ret = IRQ_NONE;
+	u8 interrupt;
+
+	if (hdmi->i2c)
+		ret = starfive_hdmi_i2c_irq(hdmi);
+
+	interrupt = hdmi_readb(hdmi, HDMI_STATUS);
+	if (interrupt & m_INT_HOTPLUG) {
+		hdmi_modb(hdmi, HDMI_STATUS, m_INT_HOTPLUG, m_INT_HOTPLUG);
+		ret = IRQ_WAKE_THREAD;
+	}
+
+	return ret;
+}
+
+static irqreturn_t starfive_hdmi_irq(int irq, void *dev_id)
+{
+	struct starfive_hdmi *hdmi = dev_id;
+
+	drm_connector_helper_hpd_irq_event(&hdmi->connector);
+
+	return IRQ_HANDLED;
+}
+
+static int starfive_hdmi_i2c_read(struct starfive_hdmi *hdmi, struct i2c_msg *msgs)
+{
+	int length = msgs->len;
+	u8 *buf = msgs->buf;
+	int ret;
+
+	ret = wait_for_completion_timeout(&hdmi->i2c->cmp, HZ / 10);
+	if (!ret)
+		return -EAGAIN;
+
+	while (length--)
+		*buf++ = hdmi_readb(hdmi, HDMI_EDID_FIFO_ADDR);
+
+	return 0;
+}
+
+static int starfive_hdmi_i2c_write(struct starfive_hdmi *hdmi, struct i2c_msg *msgs)
+{
+	/*
+	 * The DDC module only support read EDID message, so
+	 * we assume that each word write to this i2c adapter
+	 * should be the offset of EDID word address.
+	 */
+	if (msgs->len != 1 ||
+	    (msgs->addr != DDC_ADDR && msgs->addr != DDC_SEGMENT_ADDR))
+		return -EINVAL;
+
+	reinit_completion(&hdmi->i2c->cmp);
+
+	if (msgs->addr == DDC_SEGMENT_ADDR)
+		hdmi->i2c->segment_addr = msgs->buf[0];
+	if (msgs->addr == DDC_ADDR)
+		hdmi->i2c->ddc_addr = msgs->buf[0];
+
+	/* Set edid fifo first addr */
+	hdmi_writeb(hdmi, HDMI_EDID_FIFO_OFFSET, 0x00);
+
+	/* Set edid word address 0x00/0x80 */
+	hdmi_writeb(hdmi, HDMI_EDID_WORD_ADDR, hdmi->i2c->ddc_addr);
+
+	/* Set edid segment pointer */
+	hdmi_writeb(hdmi, HDMI_EDID_SEGMENT_POINTER, hdmi->i2c->segment_addr);
+
+	return 0;
+}
+
+static int starfive_hdmi_i2c_xfer(struct i2c_adapter *adap,
+				  struct i2c_msg *msgs, int num)
+{
+	struct starfive_hdmi *hdmi = i2c_get_adapdata(adap);
+	struct starfive_hdmi_i2c *i2c = hdmi->i2c;
+	int i, ret = 0;
+
+	mutex_lock(&i2c->lock);
+
+	/* Clear the EDID interrupt flag and unmute the interrupt */
+	hdmi_writeb(hdmi, HDMI_INTERRUPT_MASK1, m_INT_EDID_READY);
+	hdmi_writeb(hdmi, HDMI_INTERRUPT_STATUS1, m_INT_EDID_READY);
+
+	for (i = 0; i < num; i++) {
+		DRM_DEV_DEBUG(hdmi->dev,
+			      "xfer: num: %d/%d, len: %d, flags: %#x\n",
+			      i + 1, num, msgs[i].len, msgs[i].flags);
+
+		if (msgs[i].flags & I2C_M_RD)
+			ret = starfive_hdmi_i2c_read(hdmi, &msgs[i]);
+		else
+			ret = starfive_hdmi_i2c_write(hdmi, &msgs[i]);
+
+		if (ret < 0)
+			break;
+	}
+
+	if (!ret)
+		ret = num;
+
+	/* Mute HDMI EDID interrupt */
+	hdmi_writeb(hdmi, HDMI_INTERRUPT_MASK1, 0);
+
+	mutex_unlock(&i2c->lock);
+
+	return ret;
+}
+
+static u32 starfive_hdmi_i2c_func(struct i2c_adapter *adapter)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm starfive_hdmi_algorithm = {
+	.master_xfer	= starfive_hdmi_i2c_xfer,
+	.functionality	= starfive_hdmi_i2c_func,
+};
+
+static struct i2c_adapter *starfive_hdmi_i2c_adapter(struct starfive_hdmi *hdmi)
+{
+	struct i2c_adapter *adap;
+	struct starfive_hdmi_i2c *i2c;
+	int ret;
+
+	i2c = devm_kzalloc(hdmi->dev, sizeof(*i2c), GFP_KERNEL);
+		if (!i2c)
+			return ERR_PTR(-ENOMEM);
+
+	mutex_init(&i2c->lock);
+	init_completion(&i2c->cmp);
+
+	adap = &i2c->adap;
+	adap->class = I2C_CLASS_DDC;
+	adap->owner = THIS_MODULE;
+	adap->dev.parent = hdmi->dev;
+	adap->algo = &starfive_hdmi_algorithm;
+	strscpy(adap->name, "Starfive HDMI", sizeof(adap->name));
+	i2c_set_adapdata(adap, hdmi);
+
+	ret = devm_i2c_add_adapter(hdmi->dev, adap);
+	if (ret) {
+		dev_warn(hdmi->dev, "cannot add %s I2C adapter\n", adap->name);
+		devm_kfree(hdmi->dev, i2c);
+		return ERR_PTR(ret);
+	}
+
+	hdmi->i2c = i2c;
+
+	DRM_DEV_INFO(hdmi->dev, "registered %s I2C bus driver success\n", adap->name);
+
+	return adap;
+}
+
+static int starfive_hdmi_get_clk_rst(struct device *dev, struct starfive_hdmi *hdmi)
+{
+	int ret;
+
+	hdmi->nclks = ARRAY_SIZE(hdmi->clk_hdmi);
+	for (int i = 0; i < hdmi->nclks; ++i)
+		hdmi->clk_hdmi[i].id = hdmi_clocks[i];
+
+	ret = devm_clk_bulk_get(dev, hdmi->nclks, hdmi->clk_hdmi);
+	if (ret) {
+		dev_err(dev, "Failed to get clk controls\n");
+		return ret;
+	}
+
+	hdmi->tx_rst = devm_reset_control_get_by_index(dev, 0);
+	if (IS_ERR(hdmi->tx_rst)) {
+		dev_err(dev, "failed to get tx_rst reset\n");
+		return PTR_ERR(hdmi->tx_rst);
+	}
+
+	return 0;
+}
+
+static int starfive_hdmi_bind(struct device *dev, struct device *master,
+			      void *data)
+{
+	struct drm_device *drm = dev_get_drvdata(master);
+	struct starfive_hdmi_encoder *hdmi_encoder;
+	int ret;
+
+	hdmi_encoder = drmm_simple_encoder_alloc(drm, struct starfive_hdmi_encoder,
+						 encoder, DRM_MODE_ENCODER_TMDS);
+	if (IS_ERR(hdmi_encoder))
+		return PTR_ERR(hdmi_encoder);
+
+	hdmi_encoder->hdmi = dev_get_drvdata(dev);
+	hdmi_encoder->hdmi->drm_dev = drm;
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret)
+		return ret;
+
+	starfive_hdmi_i2c_init(hdmi_encoder->hdmi);
+
+	ret = starfive_hdmi_register(drm, hdmi_encoder);
+	if (ret)
+		goto err_put_adapter;
+
+	/* Unmute hotplug interrupt */
+	hdmi_modb(hdmi_encoder->hdmi, HDMI_STATUS, m_MASK_INT_HOTPLUG, v_MASK_INT_HOTPLUG(1));
+
+	ret = devm_request_threaded_irq(dev, hdmi_encoder->hdmi->irq, starfive_hdmi_hardirq,
+					starfive_hdmi_irq, IRQF_SHARED,
+					dev_name(dev), hdmi_encoder->hdmi);
+	if (ret < 0)
+		goto err_put_adapter;
+
+	pm_runtime_put_sync(dev);
+
+	return 0;
+
+err_put_adapter:
+	i2c_put_adapter(hdmi_encoder->hdmi->ddc);
+	return ret;
+}
+
+static const struct component_ops starfive_hdmi_ops = {
+	.bind	= starfive_hdmi_bind,
+};
+
+static int starfive_hdmi_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct starfive_hdmi *hdmi;
+	struct resource *iores;
+
+	hdmi = devm_kzalloc(&pdev->dev, sizeof(*hdmi), GFP_KERNEL);
+	if (!hdmi)
+		return -ENOMEM;
+
+	dev_set_drvdata(&pdev->dev, hdmi);
+	hdmi->dev = &pdev->dev;
+
+	iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hdmi->regs = devm_ioremap_resource(hdmi->dev, iores);
+	if (IS_ERR(hdmi->regs))
+		return PTR_ERR(hdmi->regs);
+
+	ret = starfive_hdmi_get_clk_rst(hdmi->dev, hdmi);
+	if (ret < 0)
+		return ret;
+
+	ret = devm_pm_runtime_enable(hdmi->dev);
+	if (ret)
+		return ret;
+
+	hdmi->irq = platform_get_irq(pdev, 0);
+	if (hdmi->irq < 0) {
+		ret = hdmi->irq;
+		return ret;
+	}
+
+	hdmi->ddc = starfive_hdmi_i2c_adapter(hdmi);
+	if (IS_ERR(hdmi->ddc)) {
+		ret = PTR_ERR(hdmi->ddc);
+		hdmi->ddc = NULL;
+		return ret;
+	}
+
+	return component_add(&pdev->dev, &starfive_hdmi_ops);
+}
+
+static int starfive_hdmi_remove(struct platform_device *pdev)
+{
+	component_del(&pdev->dev, &starfive_hdmi_ops);
+

drivers/gpu/drm/verisilicon/starfive_hdmi.c line 833

Quoted 10 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +10 -0
+	return 0;
+}
+
+static const struct dev_pm_ops hdmi_pm_ops = {
+	SET_RUNTIME_PM_OPS(hdmi_runtime_suspend, hdmi_runtime_resume, NULL)
+	SET_LATE_SYSTEM_SLEEP_PM_OPS(hdmi_system_pm_suspend, hdmi_system_pm_resume)
+};
+
+static const struct of_device_id starfive_hdmi_dt_ids[] = {
+	{ .compatible = "starfive,jh7110-inno-hdmi",},

So it's inno hdmi, just like Rockchip then?

Quoted 1 line

This should be a common driver.

Rockchip has a inno hdmi IP. and Starfive has a inno hdmi IP.
but the harewawre difference of them is big , it is not easy to use the common driver maybe i need the inno hdmi version here to make a distinction

best regards
Keith

Quoted 1 line

Maxime

maintainer
#32 lore raw

Re: [v3 5/6] drm/vs: Add hdmi driver

Quoted 10 lines · Keith Zhao
Quoted 6 lines

drivers/gpu/drm/verisilicon/starfive_hdmi.c line 833

Quoted 2 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +2 -0
+static const struct of_device_id starfive_hdmi_dt_ids[] = {
+	{ .compatible = "starfive,jh7110-inno-hdmi",},

So it's inno hdmi, just like Rockchip then?

This should be a common driver.

Rockchip has a inno hdmi IP. and Starfive has a inno hdmi IP.
but the harewawre difference of them is big , it is not easy to use the common driver maybe i need the inno hdmi version here to make a distinction

I just had a look at the rockchip header file: all the registers but the STARFIVE_* ones are identical.

There's no need to have two identical drivers then, please use the rockchip driver instead.

Maxime

author
#33 lore raw

Re: [v3 5/6] drm/vs: Add hdmi driver

Quoted 12 lines · Maxime Ripard
Quoted 10 lines · Keith Zhao
Quoted 6 lines

drivers/gpu/drm/verisilicon/starfive_hdmi.c line 833

Quoted 2 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +2 -0
+static const struct of_device_id starfive_hdmi_dt_ids[] = {
+	{ .compatible = "starfive,jh7110-inno-hdmi",},

So it's inno hdmi, just like Rockchip then?

This should be a common driver.

Rockchip has a inno hdmi IP. and Starfive has a inno hdmi IP.
but the harewawre difference of them is big , it is not easy to use the common driver maybe i need the inno hdmi version here to make a distinction

Quoted 7 lines

I just had a look at the rockchip header file: all the registers but the STARFIVE_* ones are identical.

There's no need to have two identical drivers then, please use the rockchip driver instead.

Maxime

ok, have a simple test , edid can get . i will continue

#34 lore raw

Re:Re: [v3 5/6] drm/vs: Add hdmi driver

Hi Keith:

Quoted 18 lines · Keith Zhao
Quoted 15 lines · Maxime Ripard
Quoted 10 lines · Keith Zhao
Quoted 6 lines

drivers/gpu/drm/verisilicon/starfive_hdmi.c line 833

Quoted 2 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +2 -0
+static const struct of_device_id starfive_hdmi_dt_ids[] = {
+	{ .compatible = "starfive,jh7110-inno-hdmi",},

So it's inno hdmi, just like Rockchip then?

This should be a common driver.

Rockchip has a inno hdmi IP. and Starfive has a inno hdmi IP.
but the harewawre difference of them is big , it is not easy to use the common driver maybe i need the inno hdmi version here to make a distinction

I just had a look at the rockchip header file: all the registers but the STARFIVE_* ones are identical.

Quoted 6 lines
Quoted 4 lines

There's no need to have two identical drivers then, please use the rockchip driver instead.

Maxime

ok, have a simple test , edid can get . i will continue

Maybe you can take drivers/gpu/drm/bridge/synopsys/dw-hdmi as a reference, this is also a hdmi ip used by rockchip/meson/sunxi/jz/imx。
We finally make it share one driver。

Quoted 6 lines

_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv

_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv

author
#35 lore raw

Re: [v3 5/6] drm/vs: Add hdmi driver

Quoted 38 lines · Andy Yan

Hi Keith:

Quoted 21 lines · Keith Zhao
Quoted 18 lines · Maxime Ripard
Quoted 10 lines · Keith Zhao
Quoted 6 lines

drivers/gpu/drm/verisilicon/starfive_hdmi.c line 833

Quoted 2 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +2 -0
+static const struct of_device_id starfive_hdmi_dt_ids[] = {
+	{ .compatible = "starfive,jh7110-inno-hdmi",},

So it's inno hdmi, just like Rockchip then?

This should be a common driver.

Rockchip has a inno hdmi IP. and Starfive has a inno hdmi IP.
but the harewawre difference of them is big , it is not easy to use the common driver maybe i need the inno hdmi version here to make a distinction

I just had a look at the rockchip header file: all the registers but the STARFIVE_* ones are identical.

There's no need to have two identical drivers then, please use the rockchip driver instead.

Quoted 8 lines
Quoted 3 lines
Quoted 1 line

Maxime

ok, have a simple test , edid can get . i will continue

Maybe you can take drivers/gpu/drm/bridge/synopsys/dw-hdmi as a reference, this is also a hdmi ip used by rockchip/meson/sunxi/jz/imx。
We finally make it share one driver。

Quoted 1 line

hi Andy:

dw_hdmi seems a good choice , it can handle inno hdmi hardware by define its dw_hdmi_plat_data.
does it means i can write own driver files such as(dw_hdmi-starfive.c) based on dw_hdmi instead of add plat_data in inno_hdmi.c

Thanks for pointing this out!!!

Quoted 5 lines
Quoted 5 lines

_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv

#36 lore raw

Re:Re: [v3 5/6] drm/vs: Add hdmi driver

Hi Keth:

Quoted 45 lines · 在 2023-12-07 18:48:13,"Keith Zhao" <[email protected]> 写道:
Quoted 42 lines · Andy Yan

Hi Keith:

Quoted 24 lines · Keith Zhao
Quoted 12 lines · Maxime Ripard
Quoted 10 lines · Keith Zhao
Quoted 6 lines

Review

Quoted 2 lines
(quoted diff) +2 -0
+static const struct of_device_id starfive_hdmi_dt_ids[] = {
+	{ .compatible = "starfive,jh7110-inno-hdmi",},

So it's inno hdmi, just like Rockchip then?

This should be a common driver.

Rockchip has a inno hdmi IP. and Starfive has a inno hdmi IP.
but the harewawre difference of them is big , it is not easy to use the common driver maybe i need the inno hdmi version here to make a distinction

Quoted 7 lines

I just had a look at the rockchip header file: all the registers but the STARFIVE_* ones are identical.

There's no need to have two identical drivers then, please use the rockchip driver instead.

Maxime

ok, have a simple test , edid can get . i will continue

Quoted 9 lines
Quoted 4 lines

Maybe you can take drivers/gpu/drm/bridge/synopsys/dw-hdmi as a reference, this is also a hdmi ip used by rockchip/meson/sunxi/jz/imx。
We finally make it share one driver。

Quoted 1 line

hi Andy:

dw_hdmi seems a good choice , it can handle inno hdmi hardware by define its dw_hdmi_plat_data.
does it means i can write own driver files such as(dw_hdmi-starfive.c) based on dw_hdmi instead of add plat_data in inno_hdmi.c

I think the process maybe like this:

1. split the inno_hdmi.c under rockchip to inno_hdmi.c(the common part), inno_hdmi-rockchip.c(the soc specific part)
2. move the common part inno_hdmi.c to drivers/gpu/drm/bridge/innosilicon/
3. add startfive specific part, inno_hdmi-startfive.c

bellow git log from kernel three show how we convert dw_hdmi to a common driver:

12b9f204e804 drm: bridge/dw_hdmi: add rockchip rk3288 support 74af9e4d03b8 dt-bindings: Add documentation for rockchip dw hdmi d346c14eeea9 drm: bridge/dw_hdmi: add function dw_hdmi_phy_enable_spare a4d3b8b050d5 drm: bridge/dw_hdmi: clear i2cmphy_stat0 reg in hdmi_phy_wait_i2c_done 632d035bace2 drm: bridge/dw_hdmi: add mode_valid support
0cd9d1428322 drm: bridge/dw_hdmi: add support for multi-byte register width access cd152393967e dt-bindings: add document for dw_hdmi
b21f4b658df8 drm: imx: imx-hdmi: move imx-hdmi to bridge/dw_hdmi aaa757a092c2 drm: imx: imx-hdmi: split phy configuration to platform driver 3d1b35a3d9f3 drm: imx: imx-hdmi: convert imx-hdmi to drm_bridge mode c2c3848851a7 drm: imx: imx-hdmi: return defer if can't get ddc i2c adapter b587833933de drm: imx: imx-hdmi: make checkpatch happy

Quoted 12 lines

Thanks for pointing this out!!!

Quoted 5 lines
Quoted 5 lines

_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv

_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv

author
#37 lore raw

Re: [v3 5/6] drm/vs: Add hdmi driver

Quoted 73 lines · Andy Yan

Hi Keth:

Quoted 45 lines · 在 2023-12-07 18:48:13,"Keith Zhao" <[email protected]> 写道:
Quoted 42 lines · Andy Yan

Hi Keith:

Quoted 24 lines · Keith Zhao
Quoted 12 lines · Maxime Ripard
Quoted 10 lines · Keith Zhao
Quoted 6 lines

Review

Quoted 2 lines
(quoted diff) +2 -0
+static const struct of_device_id starfive_hdmi_dt_ids[] = {
+	{ .compatible = "starfive,jh7110-inno-hdmi",},

So it's inno hdmi, just like Rockchip then?

This should be a common driver.

Rockchip has a inno hdmi IP. and Starfive has a inno hdmi IP.
but the harewawre difference of them is big , it is not easy to use the common driver maybe i need the inno hdmi version here to make a distinction

Quoted 7 lines

I just had a look at the rockchip header file: all the registers but the STARFIVE_* ones are identical.

There's no need to have two identical drivers then, please use the rockchip driver instead.

Maxime

ok, have a simple test , edid can get . i will continue

Quoted 9 lines
Quoted 4 lines

Maybe you can take drivers/gpu/drm/bridge/synopsys/dw-hdmi as a reference, this is also a hdmi ip used by rockchip/meson/sunxi/jz/imx。
We finally make it share one driver。

Quoted 1 line

hi Andy:

dw_hdmi seems a good choice , it can handle inno hdmi hardware by define its dw_hdmi_plat_data.
does it means i can write own driver files such as(dw_hdmi-starfive.c) based on dw_hdmi instead of add plat_data in inno_hdmi.c

I think the process maybe like this:

1. split the inno_hdmi.c under rockchip to inno_hdmi.c(the common part), inno_hdmi-rockchip.c(the soc specific part)
2. move the common part inno_hdmi.c to drivers/gpu/drm/bridge/innosilicon/
3. add startfive specific part, inno_hdmi-startfive.c

bellow git log from kernel three show how we convert dw_hdmi to a common driver:

Quoted 13 lines

12b9f204e804 drm: bridge/dw_hdmi: add rockchip rk3288 support 74af9e4d03b8 dt-bindings: Add documentation for rockchip dw hdmi d346c14eeea9 drm: bridge/dw_hdmi: add function dw_hdmi_phy_enable_spare a4d3b8b050d5 drm: bridge/dw_hdmi: clear i2cmphy_stat0 reg in hdmi_phy_wait_i2c_done 632d035bace2 drm: bridge/dw_hdmi: add mode_valid support
0cd9d1428322 drm: bridge/dw_hdmi: add support for multi-byte register width access cd152393967e dt-bindings: add document for dw_hdmi
b21f4b658df8 drm: imx: imx-hdmi: move imx-hdmi to bridge/dw_hdmi aaa757a092c2 drm: imx: imx-hdmi: split phy configuration to platform driver 3d1b35a3d9f3 drm: imx: imx-hdmi: convert imx-hdmi to drm_bridge mode c2c3848851a7 drm: imx: imx-hdmi: return defer if can't get ddc i2c adapter b587833933de drm: imx: imx-hdmi: make checkpatch happy

hi Andy:
I got you means,
as I don't have a rockchip board on hand , to split the inno_hdmi.c can not be tested.

how adout this idea:
1、split the starfive_hdmi.c under verisilicion to inno_hdmi.c(the common part), inno_hdmi-starfive.c(the soc specific part)
2. move the common part inno_hdmi.c to drivers/gpu/drm/bridge/innosilicon/
3. In the future, inno hdmi.c under rockchip will reuse the public driver.

Quoted 13 lines
Quoted 13 lines

Thanks for pointing this out!!!

Quoted 5 lines
Quoted 5 lines

_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv

_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv

#38 lore raw

Re:Re: [v3 5/6] drm/vs: Add hdmi driver

Hi Keith:

Quoted 89 lines · 在 2023-12-08 11:00:31,"Keith Zhao" <[email protected]> 写道:
Quoted 73 lines · Andy Yan

Hi Keth:

Quoted 45 lines · 在 2023-12-07 18:48:13,"Keith Zhao" <[email protected]> 写道:
Quoted 42 lines · Andy Yan

Hi Keith:

Quoted 24 lines · Keith Zhao
Quoted 12 lines · Maxime Ripard
Quoted 10 lines · Keith Zhao
Quoted 6 lines

Review

Quoted 2 lines
(quoted diff) +2 -0
+static const struct of_device_id starfive_hdmi_dt_ids[] = {
+	{ .compatible = "starfive,jh7110-inno-hdmi",},

So it's inno hdmi, just like Rockchip then?

This should be a common driver.

Rockchip has a inno hdmi IP. and Starfive has a inno hdmi IP.
but the harewawre difference of them is big , it is not easy to use the common driver maybe i need the inno hdmi version here to make a distinction

Quoted 7 lines

I just had a look at the rockchip header file: all the registers but the STARFIVE_* ones are identical.

There's no need to have two identical drivers then, please use the rockchip driver instead.

Maxime

ok, have a simple test , edid can get . i will continue

Quoted 9 lines
Quoted 4 lines

Maybe you can take drivers/gpu/drm/bridge/synopsys/dw-hdmi as a reference, this is also a hdmi ip used by rockchip/meson/sunxi/jz/imx。
We finally make it share one driver。

Quoted 1 line

hi Andy:

dw_hdmi seems a good choice , it can handle inno hdmi hardware by define its dw_hdmi_plat_data.
does it means i can write own driver files such as(dw_hdmi-starfive.c) based on dw_hdmi instead of add plat_data in inno_hdmi.c

I think the process maybe like this:

1. split the inno_hdmi.c under rockchip to inno_hdmi.c(the common part), inno_hdmi-rockchip.c(the soc specific part)
2. move the common part inno_hdmi.c to drivers/gpu/drm/bridge/innosilicon/
3. add startfive specific part, inno_hdmi-startfive.c

bellow git log from kernel three show how we convert dw_hdmi to a common driver:

Quoted 13 lines

12b9f204e804 drm: bridge/dw_hdmi: add rockchip rk3288 support 74af9e4d03b8 dt-bindings: Add documentation for rockchip dw hdmi d346c14eeea9 drm: bridge/dw_hdmi: add function dw_hdmi_phy_enable_spare a4d3b8b050d5 drm: bridge/dw_hdmi: clear i2cmphy_stat0 reg in hdmi_phy_wait_i2c_done 632d035bace2 drm: bridge/dw_hdmi: add mode_valid support
0cd9d1428322 drm: bridge/dw_hdmi: add support for multi-byte register width access cd152393967e dt-bindings: add document for dw_hdmi
b21f4b658df8 drm: imx: imx-hdmi: move imx-hdmi to bridge/dw_hdmi aaa757a092c2 drm: imx: imx-hdmi: split phy configuration to platform driver 3d1b35a3d9f3 drm: imx: imx-hdmi: convert imx-hdmi to drm_bridge mode c2c3848851a7 drm: imx: imx-hdmi: return defer if can't get ddc i2c adapter b587833933de drm: imx: imx-hdmi: make checkpatch happy

Quoted 8 lines

hi Andy:
I got you means,
as I don't have a rockchip board on hand , to split the inno_hdmi.c can not be tested.

how adout this idea:
1、split the starfive_hdmi.c under verisilicion to inno_hdmi.c(the common part), inno_hdmi-starfive.c(the soc specific part)
2. move the common part inno_hdmi.c to drivers/gpu/drm/bridge/innosilicon/
3. In the future, inno hdmi.c under rockchip will reuse the public driver.

I am not sure if drm maintainers are happy with this。

To be honest, I also don't have a i.mx board when I start convert dw_hdmi to a common driver, some respectable people from the community help test and give me many valuable advice, this is the power of open source。

I found a rk3036 based kylin board this week,but it can't boot yet,I will go on try if I can boot it this weekend。 I can do the test on rockchip side, if i can make this board work。

Quoted 14 lines
Quoted 14 lines
Quoted 14 lines

Thanks for pointing this out!!!

Quoted 5 lines
Quoted 5 lines

_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv

_______________________________________________
linux-riscv mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-riscv

maintainer
#39 lore raw

Re: [v3 5/6] drm/vs: Add hdmi driver

Hi,

Quoted 94 lines · Andy Yan
Quoted 93 lines · 在 2023-12-08 11:00:31,"Keith Zhao" <[email protected]> 写道:
Quoted 73 lines · Andy Yan

Hi Keth:

Quoted 45 lines · 在 2023-12-07 18:48:13,"Keith Zhao" <[email protected]> 写道:
Quoted 42 lines · Andy Yan

Hi Keith:

Quoted 24 lines · Keith Zhao
Quoted 12 lines · Maxime Ripard
Quoted 10 lines · Keith Zhao
Quoted 6 lines

Review

Quoted 2 lines
(quoted diff) +2 -0
+static const struct of_device_id starfive_hdmi_dt_ids[] = {
+	{ .compatible = "starfive,jh7110-inno-hdmi",},

So it's inno hdmi, just like Rockchip then?

This should be a common driver.

Rockchip has a inno hdmi IP. and Starfive has a inno hdmi IP.
but the harewawre difference of them is big , it is not easy to use the common driver maybe i need the inno hdmi version here to make a distinction

Quoted 7 lines

I just had a look at the rockchip header file: all the registers but the STARFIVE_* ones are identical.

There's no need to have two identical drivers then, please use the rockchip driver instead.

Maxime

ok, have a simple test , edid can get . i will continue

Quoted 9 lines
Quoted 4 lines

Maybe you can take drivers/gpu/drm/bridge/synopsys/dw-hdmi as a reference, this is also a hdmi ip used by rockchip/meson/sunxi/jz/imx。
We finally make it share one driver。

Quoted 1 line

hi Andy:

dw_hdmi seems a good choice , it can handle inno hdmi hardware by define its dw_hdmi_plat_data.
does it means i can write own driver files such as(dw_hdmi-starfive.c) based on dw_hdmi instead of add plat_data in inno_hdmi.c

I think the process maybe like this:

1. split the inno_hdmi.c under rockchip to inno_hdmi.c(the common part), inno_hdmi-rockchip.c(the soc specific part)
2. move the common part inno_hdmi.c to drivers/gpu/drm/bridge/innosilicon/
3. add startfive specific part, inno_hdmi-startfive.c

bellow git log from kernel three show how we convert dw_hdmi to a common driver:

Quoted 13 lines

12b9f204e804 drm: bridge/dw_hdmi: add rockchip rk3288 support 74af9e4d03b8 dt-bindings: Add documentation for rockchip dw hdmi d346c14eeea9 drm: bridge/dw_hdmi: add function dw_hdmi_phy_enable_spare a4d3b8b050d5 drm: bridge/dw_hdmi: clear i2cmphy_stat0 reg in hdmi_phy_wait_i2c_done 632d035bace2 drm: bridge/dw_hdmi: add mode_valid support
0cd9d1428322 drm: bridge/dw_hdmi: add support for multi-byte register width access cd152393967e dt-bindings: add document for dw_hdmi
b21f4b658df8 drm: imx: imx-hdmi: move imx-hdmi to bridge/dw_hdmi aaa757a092c2 drm: imx: imx-hdmi: split phy configuration to platform driver 3d1b35a3d9f3 drm: imx: imx-hdmi: convert imx-hdmi to drm_bridge mode c2c3848851a7 drm: imx: imx-hdmi: return defer if can't get ddc i2c adapter b587833933de drm: imx: imx-hdmi: make checkpatch happy

hi Andy:
I got you means,
as I don't have a rockchip board on hand , to split the inno_hdmi.c can not be tested.

Quoted 6 lines
Quoted 4 lines

how adout this idea:
1、split the starfive_hdmi.c under verisilicion to inno_hdmi.c(the common part), inno_hdmi-starfive.c(the soc specific part)
2. move the common part inno_hdmi.c to drivers/gpu/drm/bridge/innosilicon/
3. In the future, inno hdmi.c under rockchip will reuse the public driver.

I am not sure if drm maintainers are happy with this。

Not really, no.

Because we would still have two drivers for the same controller, and a common one that haven't really been tested on anything but a single platform. So arguably a worse situation than what you were suggesting in the first place.

The best solution would be to find someone with a Rockchip board to test your changes, or to get one if it's doable so you can test yourself.

Maxime

author
#40 lore raw

Re: [v3 5/6] drm/vs: Add hdmi driver

hi Maxime:
hi Andy:

Quoted 106 lines · Maxime Ripard

Hi,

Quoted 94 lines · Andy Yan
Quoted 93 lines · 在 2023-12-08 11:00:31,"Keith Zhao" <[email protected]> 写道:
Quoted 73 lines · Andy Yan

Hi Keth:

Quoted 45 lines · 在 2023-12-07 18:48:13,"Keith Zhao" <[email protected]> 写道:
Quoted 42 lines · Andy Yan

Hi Keith:

Quoted 24 lines · Keith Zhao
Quoted 12 lines · Maxime Ripard
Quoted 10 lines · Keith Zhao
Quoted 6 lines

Review

Quoted 2 lines
(quoted diff) +2 -0
+static const struct of_device_id starfive_hdmi_dt_ids[] = {
+	{ .compatible = "starfive,jh7110-inno-hdmi",},

So it's inno hdmi, just like Rockchip then?

This should be a common driver.

Rockchip has a inno hdmi IP. and Starfive has a inno hdmi IP.
but the harewawre difference of them is big , it is not easy to use the common driver maybe i need the inno hdmi version here to make a distinction

Quoted 7 lines

I just had a look at the rockchip header file: all the registers but the STARFIVE_* ones are identical.

There's no need to have two identical drivers then, please use the rockchip driver instead.

Maxime

ok, have a simple test , edid can get . i will continue

Quoted 9 lines
Quoted 4 lines

Maybe you can take drivers/gpu/drm/bridge/synopsys/dw-hdmi as a reference, this is also a hdmi ip used by rockchip/meson/sunxi/jz/imx。
We finally make it share one driver。

Quoted 1 line

hi Andy:

dw_hdmi seems a good choice , it can handle inno hdmi hardware by define its dw_hdmi_plat_data.
does it means i can write own driver files such as(dw_hdmi-starfive.c) based on dw_hdmi instead of add plat_data in inno_hdmi.c

I think the process maybe like this:

1. split the inno_hdmi.c under rockchip to inno_hdmi.c(the common part), inno_hdmi-rockchip.c(the soc specific part)
2. move the common part inno_hdmi.c to drivers/gpu/drm/bridge/innosilicon/
3. add startfive specific part, inno_hdmi-startfive.c

bellow git log from kernel three show how we convert dw_hdmi to a common driver:

Quoted 13 lines

12b9f204e804 drm: bridge/dw_hdmi: add rockchip rk3288 support 74af9e4d03b8 dt-bindings: Add documentation for rockchip dw hdmi d346c14eeea9 drm: bridge/dw_hdmi: add function dw_hdmi_phy_enable_spare a4d3b8b050d5 drm: bridge/dw_hdmi: clear i2cmphy_stat0 reg in hdmi_phy_wait_i2c_done 632d035bace2 drm: bridge/dw_hdmi: add mode_valid support
0cd9d1428322 drm: bridge/dw_hdmi: add support for multi-byte register width access cd152393967e dt-bindings: add document for dw_hdmi
b21f4b658df8 drm: imx: imx-hdmi: move imx-hdmi to bridge/dw_hdmi aaa757a092c2 drm: imx: imx-hdmi: split phy configuration to platform driver 3d1b35a3d9f3 drm: imx: imx-hdmi: convert imx-hdmi to drm_bridge mode c2c3848851a7 drm: imx: imx-hdmi: return defer if can't get ddc i2c adapter b587833933de drm: imx: imx-hdmi: make checkpatch happy

hi Andy:
I got you means,
as I don't have a rockchip board on hand , to split the inno_hdmi.c can not be tested.

Quoted 6 lines
Quoted 4 lines

how adout this idea:
1、split the starfive_hdmi.c under verisilicion to inno_hdmi.c(the common part), inno_hdmi-starfive.c(the soc specific part)
2. move the common part inno_hdmi.c to drivers/gpu/drm/bridge/innosilicon/
3. In the future, inno hdmi.c under rockchip will reuse the public driver.

I am not sure if drm maintainers are happy with this。

Not really, no.

Quoted 7 lines

Because we would still have two drivers for the same controller, and a common one that haven't really been tested on anything but a single platform. So arguably a worse situation than what you were suggesting in the first place.

The best solution would be to find someone with a Rockchip board to test your changes, or to get one if it's doable so you can test yourself.

ok I will also try to buy a Rockchip 3036 board for self-test.
According to the commit log idea provided by Andy before, make the inno_hdmi driver common module.

would the steps be ok? (if I tested rockchip and starifve pass)
1. split the inno_hdmi.c under rockchip to inno_hdmi.c(the common part), inno_hdmi-rockchip.c(the soc specific part)
2. move the common part inno_hdmi.c to drivers/gpu/drm/bridge/innosilicon/
3. add startfive specific part, inno_hdmi-startfive.c

Thanks

Quoted 2 lines

Maxime

#41 lore raw

Re:Re: [v3 5/6] drm/vs: Add hdmi driver

Hi Keith:

Quoted 115 lines · 在 2023-12-11 18:24:35,"Keith Zhao" <[email protected]> 写道:

hi Maxime:
hi Andy:

Quoted 111 lines · Maxime Ripard

Hi,

Quoted 94 lines · Andy Yan
Quoted 93 lines · 在 2023-12-08 11:00:31,"Keith Zhao" <[email protected]> 写道:
Quoted 73 lines · Andy Yan

Hi Keth:

Quoted 45 lines · 在 2023-12-07 18:48:13,"Keith Zhao" <[email protected]> 写道:
Quoted 42 lines · Andy Yan

Hi Keith:

Quoted 24 lines · Keith Zhao
Quoted 12 lines · Maxime Ripard
Quoted 10 lines · Keith Zhao
Quoted 6 lines

Review

Quoted 2 lines
(quoted diff) +2 -0
+static const struct of_device_id starfive_hdmi_dt_ids[] = {
+	{ .compatible = "starfive,jh7110-inno-hdmi",},

So it's inno hdmi, just like Rockchip then?

This should be a common driver.

Rockchip has a inno hdmi IP. and Starfive has a inno hdmi IP.
but the harewawre difference of them is big , it is not easy to use the common driver maybe i need the inno hdmi version here to make a distinction

Quoted 7 lines

I just had a look at the rockchip header file: all the registers but the STARFIVE_* ones are identical.

There's no need to have two identical drivers then, please use the rockchip driver instead.

Maxime

ok, have a simple test , edid can get . i will continue

Quoted 9 lines
Quoted 4 lines

Maybe you can take drivers/gpu/drm/bridge/synopsys/dw-hdmi as a reference, this is also a hdmi ip used by rockchip/meson/sunxi/jz/imx。
We finally make it share one driver。

Quoted 1 line

hi Andy:

dw_hdmi seems a good choice , it can handle inno hdmi hardware by define its dw_hdmi_plat_data.
does it means i can write own driver files such as(dw_hdmi-starfive.c) based on dw_hdmi instead of add plat_data in inno_hdmi.c

I think the process maybe like this:

1. split the inno_hdmi.c under rockchip to inno_hdmi.c(the common part), inno_hdmi-rockchip.c(the soc specific part)
2. move the common part inno_hdmi.c to drivers/gpu/drm/bridge/innosilicon/
3. add startfive specific part, inno_hdmi-startfive.c

bellow git log from kernel three show how we convert dw_hdmi to a common driver:

Quoted 13 lines

12b9f204e804 drm: bridge/dw_hdmi: add rockchip rk3288 support 74af9e4d03b8 dt-bindings: Add documentation for rockchip dw hdmi d346c14eeea9 drm: bridge/dw_hdmi: add function dw_hdmi_phy_enable_spare a4d3b8b050d5 drm: bridge/dw_hdmi: clear i2cmphy_stat0 reg in hdmi_phy_wait_i2c_done 632d035bace2 drm: bridge/dw_hdmi: add mode_valid support
0cd9d1428322 drm: bridge/dw_hdmi: add support for multi-byte register width access cd152393967e dt-bindings: add document for dw_hdmi
b21f4b658df8 drm: imx: imx-hdmi: move imx-hdmi to bridge/dw_hdmi aaa757a092c2 drm: imx: imx-hdmi: split phy configuration to platform driver 3d1b35a3d9f3 drm: imx: imx-hdmi: convert imx-hdmi to drm_bridge mode c2c3848851a7 drm: imx: imx-hdmi: return defer if can't get ddc i2c adapter b587833933de drm: imx: imx-hdmi: make checkpatch happy

hi Andy:
I got you means,
as I don't have a rockchip board on hand , to split the inno_hdmi.c can not be tested.

Quoted 6 lines
Quoted 4 lines

how adout this idea:
1、split the starfive_hdmi.c under verisilicion to inno_hdmi.c(the common part), inno_hdmi-starfive.c(the soc specific part)
2. move the common part inno_hdmi.c to drivers/gpu/drm/bridge/innosilicon/
3. In the future, inno hdmi.c under rockchip will reuse the public driver.

I am not sure if drm maintainers are happy with this。

Not really, no.

Because we would still have two drivers for the same controller, and a common one that haven't really been tested on anything but a single platform. So arguably a worse situation than what you were suggesting in the first place.

Quoted 5 lines
Quoted 2 lines

The best solution would be to find someone with a Rockchip board to test your changes, or to get one if it's doable so you can test yourself.

ok I will also try to buy a Rockchip 3036 board for self-test.
According to the commit log idea provided by Andy before, make the inno_hdmi driver common module.

I finally make my rk3036 based kylin board bootup (use a linux 4.4 downstream bsp,I will find time to try boot it with mainline)。 So I can help do the test for rockchip side。

It seems not that easy to buy a rk3036 based board from market now。

Quoted 9 lines

would the steps be ok? (if I tested rockchip and starifve pass)
1. split the inno_hdmi.c under rockchip to inno_hdmi.c(the common part), inno_hdmi-rockchip.c(the soc specific part)
2. move the common part inno_hdmi.c to drivers/gpu/drm/bridge/innosilicon/
3. add startfive specific part, inno_hdmi-startfive.c

Thanks

Quoted 2 lines

Maxime

author
#42 lore raw

Re: [v3 5/6] drm/vs: Add hdmi driver

Quoted 121 lines · Andy Yan

Hi Keith:

Quoted 118 lines · 在 2023-12-11 18:24:35,"Keith Zhao" <[email protected]> 写道:

hi Maxime:
hi Andy:

Quoted 113 lines · Maxime Ripard

Hi,

Quoted 94 lines · Andy Yan
Quoted 93 lines · 在 2023-12-08 11:00:31,"Keith Zhao" <[email protected]> 写道:
Quoted 73 lines · Andy Yan

Hi Keth:

Quoted 45 lines · 在 2023-12-07 18:48:13,"Keith Zhao" <[email protected]> 写道:
Quoted 42 lines · Andy Yan

Hi Keith:

Quoted 24 lines · Keith Zhao
Quoted 12 lines · Maxime Ripard
Quoted 10 lines · Keith Zhao
Quoted 6 lines
Quoted 2 lines

+static const struct of_device_id starfive_hdmi_dt_ids[] = {
+ { .compatible = "starfive,jh7110-inno-hdmi",},

So it's inno hdmi, just like Rockchip then?

This should be a common driver.

Rockchip has a inno hdmi IP. and Starfive has a inno hdmi IP.
but the harewawre difference of them is big , it is not easy to use the common driver maybe i need the inno hdmi version here to make a distinction

Quoted 7 lines

I just had a look at the rockchip header file: all the registers but the STARFIVE_* ones are identical.

There's no need to have two identical drivers then, please use the rockchip driver instead.

Maxime

ok, have a simple test , edid can get . i will continue

Quoted 9 lines
Quoted 4 lines

Maybe you can take drivers/gpu/drm/bridge/synopsys/dw-hdmi as a reference, this is also a hdmi ip used by rockchip/meson/sunxi/jz/imx。
We finally make it share one driver。

Quoted 1 line

hi Andy:

dw_hdmi seems a good choice , it can handle inno hdmi hardware by define its dw_hdmi_plat_data.
does it means i can write own driver files such as(dw_hdmi-starfive.c) based on dw_hdmi instead of add plat_data in inno_hdmi.c

I think the process maybe like this:

1. split the inno_hdmi.c under rockchip to inno_hdmi.c(the common part), inno_hdmi-rockchip.c(the soc specific part)
2. move the common part inno_hdmi.c to drivers/gpu/drm/bridge/innosilicon/
3. add startfive specific part, inno_hdmi-startfive.c

bellow git log from kernel three show how we convert dw_hdmi to a common driver:

Quoted 13 lines

12b9f204e804 drm: bridge/dw_hdmi: add rockchip rk3288 support 74af9e4d03b8 dt-bindings: Add documentation for rockchip dw hdmi d346c14eeea9 drm: bridge/dw_hdmi: add function dw_hdmi_phy_enable_spare a4d3b8b050d5 drm: bridge/dw_hdmi: clear i2cmphy_stat0 reg in hdmi_phy_wait_i2c_done 632d035bace2 drm: bridge/dw_hdmi: add mode_valid support
0cd9d1428322 drm: bridge/dw_hdmi: add support for multi-byte register width access cd152393967e dt-bindings: add document for dw_hdmi
b21f4b658df8 drm: imx: imx-hdmi: move imx-hdmi to bridge/dw_hdmi aaa757a092c2 drm: imx: imx-hdmi: split phy configuration to platform driver 3d1b35a3d9f3 drm: imx: imx-hdmi: convert imx-hdmi to drm_bridge mode c2c3848851a7 drm: imx: imx-hdmi: return defer if can't get ddc i2c adapter b587833933de drm: imx: imx-hdmi: make checkpatch happy

hi Andy:
I got you means,
as I don't have a rockchip board on hand , to split the inno_hdmi.c can not be tested.

Quoted 6 lines
Quoted 4 lines

how adout this idea:
1、split the starfive_hdmi.c under verisilicion to inno_hdmi.c(the common part), inno_hdmi-starfive.c(the soc specific part)
2. move the common part inno_hdmi.c to drivers/gpu/drm/bridge/innosilicon/
3. In the future, inno hdmi.c under rockchip will reuse the public driver.

I am not sure if drm maintainers are happy with this。

Not really, no.

Because we would still have two drivers for the same controller, and a common one that haven't really been tested on anything but a single platform. So arguably a worse situation than what you were suggesting in the first place.

The best solution would be to find someone with a Rockchip board to test your changes, or to get one if it's doable so you can test yourself.

Quoted 7 lines
Quoted 2 lines

ok I will also try to buy a Rockchip 3036 board for self-test.
According to the commit log idea provided by Andy before, make the inno_hdmi driver common module.

I finally make my rk3036 based kylin board bootup (use a linux 4.4 downstream bsp,I will find time to try boot it with mainline)。 So I can help do the test for rockchip side。

It seems not that easy to buy a rk3036 based board from market now。

en, The online store seems to have stopped selling rk3036
really not easy to buy one , I write the code first , need help testing rk3036 in the future.

thanks

Quoted 10 lines
Quoted 10 lines

would the steps be ok? (if I tested rockchip and starifve pass)
1. split the inno_hdmi.c under rockchip to inno_hdmi.c(the common part), inno_hdmi-rockchip.c(the soc specific part)
2. move the common part inno_hdmi.c to drivers/gpu/drm/bridge/innosilicon/
3. add startfive specific part, inno_hdmi-startfive.c

Thanks

Quoted 2 lines

Maxime

#43 lore raw

Re:Re: [v3 5/6] drm/vs: Add hdmi driver

Hi Keith:

Quoted 127 lines · 在 2023-12-13 09:40:31,"Keith Zhao" <[email protected]> 写道:
Quoted 124 lines · Andy Yan

Hi Keith:

Quoted 120 lines · 在 2023-12-11 18:24:35,"Keith Zhao" <[email protected]> 写道:

hi Maxime:
hi Andy:

Quoted 106 lines · Maxime Ripard

Hi,

Quoted 94 lines · Andy Yan
Quoted 93 lines · 在 2023-12-08 11:00:31,"Keith Zhao" <[email protected]> 写道:
Quoted 73 lines · Andy Yan

Hi Keth:

Quoted 45 lines · 在 2023-12-07 18:48:13,"Keith Zhao" <[email protected]> 写道:
Quoted 42 lines · Andy Yan

Hi Keith:

Quoted 24 lines · Keith Zhao
Quoted 12 lines · Maxime Ripard
Quoted 10 lines · Keith Zhao
Quoted 6 lines

+static const struct of_device_id starfive_hdmi_dt_ids[] = {
+ { .compatible = "starfive,jh7110-inno-hdmi",},

So it's inno hdmi, just like Rockchip then?

This should be a common driver.

Rockchip has a inno hdmi IP. and Starfive has a inno hdmi IP.
but the harewawre difference of them is big , it is not easy to use the common driver maybe i need the inno hdmi version here to make a distinction

Quoted 7 lines

I just had a look at the rockchip header file: all the registers but the STARFIVE_* ones are identical.

There's no need to have two identical drivers then, please use the rockchip driver instead.

Maxime

ok, have a simple test , edid can get . i will continue

Quoted 9 lines
Quoted 4 lines

Maybe you can take drivers/gpu/drm/bridge/synopsys/dw-hdmi as a reference, this is also a hdmi ip used by rockchip/meson/sunxi/jz/imx。
We finally make it share one driver。

Quoted 1 line

hi Andy:

dw_hdmi seems a good choice , it can handle inno hdmi hardware by define its dw_hdmi_plat_data.
does it means i can write own driver files such as(dw_hdmi-starfive.c) based on dw_hdmi instead of add plat_data in inno_hdmi.c

I think the process maybe like this:

1. split the inno_hdmi.c under rockchip to inno_hdmi.c(the common part), inno_hdmi-rockchip.c(the soc specific part)
2. move the common part inno_hdmi.c to drivers/gpu/drm/bridge/innosilicon/
3. add startfive specific part, inno_hdmi-startfive.c

bellow git log from kernel three show how we convert dw_hdmi to a common driver:

Quoted 13 lines

12b9f204e804 drm: bridge/dw_hdmi: add rockchip rk3288 support 74af9e4d03b8 dt-bindings: Add documentation for rockchip dw hdmi d346c14eeea9 drm: bridge/dw_hdmi: add function dw_hdmi_phy_enable_spare a4d3b8b050d5 drm: bridge/dw_hdmi: clear i2cmphy_stat0 reg in hdmi_phy_wait_i2c_done 632d035bace2 drm: bridge/dw_hdmi: add mode_valid support
0cd9d1428322 drm: bridge/dw_hdmi: add support for multi-byte register width access cd152393967e dt-bindings: add document for dw_hdmi
b21f4b658df8 drm: imx: imx-hdmi: move imx-hdmi to bridge/dw_hdmi aaa757a092c2 drm: imx: imx-hdmi: split phy configuration to platform driver 3d1b35a3d9f3 drm: imx: imx-hdmi: convert imx-hdmi to drm_bridge mode c2c3848851a7 drm: imx: imx-hdmi: return defer if can't get ddc i2c adapter b587833933de drm: imx: imx-hdmi: make checkpatch happy

hi Andy:
I got you means,
as I don't have a rockchip board on hand , to split the inno_hdmi.c can not be tested.

Quoted 6 lines
Quoted 4 lines

how adout this idea:
1、split the starfive_hdmi.c under verisilicion to inno_hdmi.c(the common part), inno_hdmi-starfive.c(the soc specific part)
2. move the common part inno_hdmi.c to drivers/gpu/drm/bridge/innosilicon/
3. In the future, inno hdmi.c under rockchip will reuse the public driver.

I am not sure if drm maintainers are happy with this。

Not really, no.

Quoted 7 lines

Because we would still have two drivers for the same controller, and a common one that haven't really been tested on anything but a single platform. So arguably a worse situation than what you were suggesting in the first place.

The best solution would be to find someone with a Rockchip board to test your changes, or to get one if it's doable so you can test yourself.

ok I will also try to buy a Rockchip 3036 board for self-test.
According to the commit log idea provided by Andy before, make the inno_hdmi driver common module.

Quoted 6 lines
Quoted 4 lines

I finally make my rk3036 based kylin board bootup (use a linux 4.4 downstream bsp,I will find time to try boot it with mainline)。 So I can help do the test for rockchip side。

It seems not that easy to buy a rk3036 based board from market now。

en, The online store seems to have stopped selling rk3036
really not easy to buy one , I write the code first , need help testing rk3036 in the future.

I found A RK3128 based board XPI-3128 is for sale[0], which also has a inno-hdmi. And Alx Bee is working on adding upstream support for it[1].

[0] https://www.geniatech.com/product/xpi-3128/

[1]https://patchwork.kernel.org/project/linux-arm-kernel/cover/[email protected]/

Quoted 12 lines

thanks

Quoted 10 lines
Quoted 10 lines

would the steps be ok? (if I tested rockchip and starifve pass)
1. split the inno_hdmi.c under rockchip to inno_hdmi.c(the common part), inno_hdmi-rockchip.c(the soc specific part)
2. move the common part inno_hdmi.c to drivers/gpu/drm/bridge/innosilicon/
3. add startfive specific part, inno_hdmi-startfive.c

Thanks

Quoted 2 lines

Maxime

maintainer
#44 lore raw

Re: [v3 5/6] drm/vs: Add hdmi driver

In reply to Keith Zhao
Quoted 54 lines · Keith Zhao

add hdmi driver as encoder and connect

---
 drivers/gpu/drm/verisilicon/Kconfig         |   8 +
 drivers/gpu/drm/verisilicon/Makefile        |   1 +
 drivers/gpu/drm/verisilicon/starfive_hdmi.c | 849 ++++++++++++++++++++
 drivers/gpu/drm/verisilicon/starfive_hdmi.h | 304 +++++++
 drivers/gpu/drm/verisilicon/vs_drv.c        |   3 +
 drivers/gpu/drm/verisilicon/vs_drv.h        |   4 +
 6 files changed, 1169 insertions(+)
 create mode 100644 drivers/gpu/drm/verisilicon/starfive_hdmi.c
 create mode 100644 drivers/gpu/drm/verisilicon/starfive_hdmi.h
drivers/gpu/drm/verisilicon/Kconfig +8 -0
index e10fa97635aa..122c786e3948 100644
@@ -11,3 +11,11 @@ config DRM_VERISILICON
          This driver provides VeriSilicon kernel mode
          setting and buffer management. It does not
          provide 2D or 3D acceleration.
+
+config DRM_VERISILICON_STARFIVE_HDMI
+       bool "Starfive HDMI extensions"
+       depends on DRM_VERISILICON
+       help
+          This selects support for StarFive soc specific extensions
+          for the Innosilicon HDMI driver. If you want to enable
+          HDMI on JH7110 based soc, you should select this option.
drivers/gpu/drm/verisilicon/Makefile +1 -0
index bf6f2b7ee480..71fadafcee13 100644
@@ -6,4 +6,5 @@ vs_drm-objs := vs_dc_hw.o \
                vs_drv.o \
                vs_modeset.o \
                vs_plane.o
+vs_drm-$(CONFIG_DRM_VERISILICON_STARFIVE_HDMI) += starfive_hdmi.o
 obj-$(CONFIG_DRM_VERISILICON) += vs_drm.o
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +7 -0
new file mode 100644
index 000000000000..aa621db0dee0
@@ -0,0 +1,849 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2023 StarFive Technology Co., Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/component.h>

drivers/gpu/drm/verisilicon/starfive_hdmi.c line 17

Quoted 10 lines
drivers/gpu/drm/verisilicon/starfive_hdmi.c new file +10 -0
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/hdmi.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/media-bus-format.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>

You probably don't need this header and the implicit includes it makes are dropped now in linux-next. Please check what you actually need and make them explicit.

Rob

author
#45 lore raw

PATCH v3 6/6 drm/vs: simple encoder

In reply to Keith Zhao

add simple encoder for dsi bridge

---
 drivers/gpu/drm/verisilicon/Makefile        |   4 +-
 drivers/gpu/drm/verisilicon/vs_drv.c        |   2 +
 drivers/gpu/drm/verisilicon/vs_simple_enc.c | 195 ++++++++++++++++++++
 drivers/gpu/drm/verisilicon/vs_simple_enc.h |  23 +++
 4 files changed, 223 insertions(+), 1 deletion(-)
 create mode 100644 drivers/gpu/drm/verisilicon/vs_simple_enc.c
 create mode 100644 drivers/gpu/drm/verisilicon/vs_simple_enc.h
drivers/gpu/drm/verisilicon/Makefile +3 -1
index 71fadafcee13..cd5d0a90bcfe 100644
@@ -5,6 +5,8 @@ vs_drm-objs := vs_dc_hw.o \
 		vs_crtc.o \
 		vs_drv.o \
 		vs_modeset.o \
-		vs_plane.o
+		vs_plane.o \
+		vs_simple_enc.o
+
 vs_drm-$(CONFIG_DRM_VERISILICON_STARFIVE_HDMI) += starfive_hdmi.o
 obj-$(CONFIG_DRM_VERISILICON) += vs_drm.o
drivers/gpu/drm/verisilicon/vs_drv.c +2 -0
index d7e5199fe293..946f137ab124 100644
@@ -23,6 +23,7 @@
 #include "vs_drv.h"
 #include "vs_modeset.h"
 #include "vs_dc.h"
+#include "vs_simple_enc.h"
 
 #define DRV_NAME	"verisilicon"
 #define DRV_DESC	"Verisilicon DRM driver"
@@ -217,6 +218,7 @@ static struct platform_driver *drm_sub_drivers[] = {
 #ifdef CONFIG_DRM_VERISILICON_STARFIVE_HDMI
 	&starfive_hdmi_driver,
 #endif
+	&simple_encoder_driver,
 };
 
 static struct component_match *vs_drm_match_add(struct device *dev)
drivers/gpu/drm/verisilicon/vs_simple_enc.c new file +195 -0

195 lines not on this page · raw message

drivers/gpu/drm/verisilicon/vs_simple_enc.h new file +23 -0
new file mode 100644
index 000000000000..fb33ca9e18d6
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2022 VeriSilicon Holdings Co., Ltd.
+ */
+
+#ifndef __VS_SIMPLE_ENC_H_
+#define __VS_SIMPLE_ENC_H_
+
+struct simple_encoder_priv {
+	unsigned char encoder_type;
+};
+
+struct simple_encoder {
+	struct drm_encoder encoder;
+	struct device *dev;
+	const struct simple_encoder_priv *priv;
+	struct regmap *dss_regmap;
+	unsigned int offset;
+	unsigned int mask;
+};
+
+extern struct platform_driver simple_encoder_driver;
+#endif /* __VS_SIMPLE_ENC_H_ */
Signature · 1 line
2.34.1
#46 lore raw

Re: [v3 6/6] drm/vs: simple encoder

kernel test robot noticed the following build warnings:

Hi Keith,

kernel test robot noticed the following build warnings:

[auto build test WARNING on robh/for-next]
[also build test WARNING on linus/master v6.7-rc4]
[cannot apply to drm-misc/drm-misc-next drm/drm-next next-20231205] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Keith-Zhao/dt-bindings-display-Add-yamls-for-JH7110-display-system/20231204-203725
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
patch link:    https://lore.kernel.org/r/20231204123315.28456-7-keith.zhao%40starfivetech.com
patch subject: [v3 6/6] drm/vs: simple encoder
config: m68k-allyesconfig (https://download.01.org/0day-ci/archive/20231205/[email protected]/config)
compiler: m68k-linux-gcc (GCC) 13.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20231205/[email protected]/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/

All warnings (new ones prefixed by >>):

>> drivers/gpu/drm/verisilicon/vs_simple_enc.c:49:6: warning: no previous prototype for 'encoder_atomic_enable' [-Wmissing-prototypes]
      49 | void encoder_atomic_enable(struct drm_encoder *encoder,
         |      ^~~~~~~~~~~~~~~~~~~~~
>> drivers/gpu/drm/verisilicon/vs_simple_enc.c:58:5: warning: no previous prototype for 'encoder_atomic_check' [-Wmissing-prototypes]

58 | int encoder_atomic_check(struct drm_encoder *encoder,
| ^~~~~~~~~~~~~~~~~~~~

Kconfig warnings: (for reference only)
WARNING: unmet direct dependencies detected for DMA_CMA Depends on [n]: HAVE_DMA_CONTIGUOUS [=n] && CMA [=y] Selected by [y]:
- DRM_VERISILICON [=y] && HAS_IOMEM [=y] && DRM [=y]

vim +/encoder_atomic_enable +49 drivers/gpu/drm/verisilicon/vs_simple_enc.c

    48	
  > 49	void encoder_atomic_enable(struct drm_encoder *encoder,
    50				   struct drm_atomic_state *state)
    51	{
    52		struct simple_encoder *simple = to_simple_encoder(encoder);
    53	
    54		regmap_update_bits(simple->dss_regmap, simple->offset, simple->mask,
    55				   simple->mask);
    56	}
    57	
  > 58	int encoder_atomic_check(struct drm_encoder *encoder,
    59				 struct drm_crtc_state *crtc_state,
    60				 struct drm_connector_state *conn_state)
    61	{
    62		struct vs_crtc_state *vs_crtc_state = to_vs_crtc_state(crtc_state);
    63		struct drm_connector *connector = conn_state->connector;
    64		int ret = 0;
    65	
    66		struct drm_bridge *first_bridge = drm_bridge_chain_get_first_bridge(encoder);
    67		struct drm_bridge_state *bridge_state = ERR_PTR(-EINVAL);
    68	
    69		vs_crtc_state->encoder_type = encoder->encoder_type;
    70	
    71		if (first_bridge && first_bridge->funcs->atomic_duplicate_state)
    72			bridge_state = drm_atomic_get_bridge_state(crtc_state->state, first_bridge);
    73	
    74		if (IS_ERR(bridge_state)) {
    75			if (connector->display_info.num_bus_formats)
    76				vs_crtc_state->output_fmt = connector->display_info.bus_formats[0];
    77			else
    78				vs_crtc_state->output_fmt = MEDIA_BUS_FMT_FIXED;
    79		} else {
    80			vs_crtc_state->output_fmt = bridge_state->input_bus_cfg.format;
    81		}
    82	
    83		switch (vs_crtc_state->output_fmt) {
    84		case MEDIA_BUS_FMT_FIXED:
    85		case MEDIA_BUS_FMT_RGB565_1X16:
    86		case MEDIA_BUS_FMT_RGB666_1X18:
    87		case MEDIA_BUS_FMT_RGB888_1X24:
    88		case MEDIA_BUS_FMT_RGB666_1X24_CPADHI:
    89		case MEDIA_BUS_FMT_RGB101010_1X30:
    90		case MEDIA_BUS_FMT_UYYVYY8_0_5X24:
    91		case MEDIA_BUS_FMT_UYVY8_1X16:
    92		case MEDIA_BUS_FMT_YUV8_1X24:
    93		case MEDIA_BUS_FMT_UYYVYY10_0_5X30:
    94		case MEDIA_BUS_FMT_UYVY10_1X20:
    95		case MEDIA_BUS_FMT_YUV10_1X30:
    96			ret = 0;
    97			break;
    98		default:
    99			ret = -EINVAL;

100 break;
101 }
102
103 /* If MEDIA_BUS_FMT_FIXED, set it to default value */
104 if (vs_crtc_state->output_fmt == MEDIA_BUS_FMT_FIXED)
105 vs_crtc_state->output_fmt = MEDIA_BUS_FMT_RGB888_1X24;
106
107 return ret;
108 }
109

Signature · 2 lines
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
#47 lore raw

Re: [v3 6/6] drm/vs: simple encoder

In reply to Keith Zhao
Quoted 2 lines · Keith Zhao

add simple encoder for dsi bridge

This doesn't look like a proper commit message.

Quoted 61 lines
---
 drivers/gpu/drm/verisilicon/Makefile        |   4 +-
 drivers/gpu/drm/verisilicon/vs_drv.c        |   2 +
 drivers/gpu/drm/verisilicon/vs_simple_enc.c | 195 ++++++++++++++++++++
 drivers/gpu/drm/verisilicon/vs_simple_enc.h |  23 +++
 4 files changed, 223 insertions(+), 1 deletion(-)
 create mode 100644 drivers/gpu/drm/verisilicon/vs_simple_enc.c
 create mode 100644 drivers/gpu/drm/verisilicon/vs_simple_enc.h
drivers/gpu/drm/verisilicon/Makefile +3 -1
index 71fadafcee13..cd5d0a90bcfe 100644
@@ -5,6 +5,8 @@ vs_drm-objs := vs_dc_hw.o \
                vs_crtc.o \
                vs_drv.o \
                vs_modeset.o \
-               vs_plane.o
+               vs_plane.o \
+               vs_simple_enc.o
+
 vs_drm-$(CONFIG_DRM_VERISILICON_STARFIVE_HDMI) += starfive_hdmi.o
 obj-$(CONFIG_DRM_VERISILICON) += vs_drm.o
drivers/gpu/drm/verisilicon/vs_drv.c +2 -0
index d7e5199fe293..946f137ab124 100644
@@ -23,6 +23,7 @@
 #include "vs_drv.h"
 #include "vs_modeset.h"
 #include "vs_dc.h"
+#include "vs_simple_enc.h"
 
 #define DRV_NAME       "verisilicon"
 #define DRV_DESC       "Verisilicon DRM driver"
@@ -217,6 +218,7 @@ static struct platform_driver *drm_sub_drivers[] = {
 #ifdef CONFIG_DRM_VERISILICON_STARFIVE_HDMI
        &starfive_hdmi_driver,
 #endif
+       &simple_encoder_driver,
 };
 
 static struct component_match *vs_drm_match_add(struct device *dev)
drivers/gpu/drm/verisilicon/vs_simple_enc.c new file +10 -0
new file mode 100644
index 000000000000..c5a8d82bc469
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 VeriSilicon Holdings Co., Ltd.
+ */
+#include <linux/component.h>
+#include <linux/of_device.h>
+#include <linux/module.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_bridge.h>

drivers/gpu/drm/verisilicon/vs_simple_enc.c line 20

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_simple_enc.c new file +10 -0
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_of.h>
+#include <linux/regmap.h>
+#include <linux/media-bus-format.h>
+#include <linux/mfd/syscon.h>
+
+#include "vs_crtc.h"
+#include "vs_simple_enc.h"
+
+static const struct simple_encoder_priv dsi_priv = {

Please use proper prefix for all the struct and function names. vs_simple_encoder sounds better. Or vs_dsi_encoder.

Quoted 42 lines
drivers/gpu/drm/verisilicon/vs_simple_enc.c new file +42 -0
+       .encoder_type = DRM_MODE_ENCODER_DSI
+};
+
+static inline struct simple_encoder *to_simple_encoder(struct drm_encoder *enc)
+{
+       return container_of(enc, struct simple_encoder, encoder);
+}
+
+static int encoder_parse_dt(struct device *dev)
+{
+       struct simple_encoder *simple = dev_get_drvdata(dev);
+       unsigned int args[2];
+
+       simple->dss_regmap = syscon_regmap_lookup_by_phandle_args(dev->of_node,
+                                                                 "starfive,syscon",
+                                                                 2, args);
+
+       if (IS_ERR(simple->dss_regmap)) {
+               return dev_err_probe(dev, PTR_ERR(simple->dss_regmap),
+                                    "getting the regmap failed\n");
+       }
+
+       simple->offset = args[0];
+       simple->mask = args[1];
+
+       return 0;
+}
+
+void encoder_atomic_enable(struct drm_encoder *encoder,
+                          struct drm_atomic_state *state)
+{
+       struct simple_encoder *simple = to_simple_encoder(encoder);
+
+       regmap_update_bits(simple->dss_regmap, simple->offset, simple->mask,
+                          simple->mask);
+}
+
+int encoder_atomic_check(struct drm_encoder *encoder,
+                        struct drm_crtc_state *crtc_state,
+                        struct drm_connector_state *conn_state)
+{
+       struct vs_crtc_state *vs_crtc_state = to_vs_crtc_state(crtc_state);

drivers/gpu/drm/verisilicon/vs_simple_enc.c line 72

Quoted 10 lines
drivers/gpu/drm/verisilicon/vs_simple_enc.c new file +10 -0
+       struct drm_connector *connector = conn_state->connector;
+       int ret = 0;
+
+       struct drm_bridge *first_bridge = drm_bridge_chain_get_first_bridge(encoder);
+       struct drm_bridge_state *bridge_state = ERR_PTR(-EINVAL);
+
+       vs_crtc_state->encoder_type = encoder->encoder_type;
+
+       if (first_bridge && first_bridge->funcs->atomic_duplicate_state)
+               bridge_state = drm_atomic_get_bridge_state(crtc_state->state, first_bridge);

Please don't poke into others' playground. This should go into your DSI bridge's atomic_check() instead.

Quoted 155 lines
drivers/gpu/drm/verisilicon/vs_simple_enc.c new file +123 -0
+
+       if (IS_ERR(bridge_state)) {
+               if (connector->display_info.num_bus_formats)
+                       vs_crtc_state->output_fmt = connector->display_info.bus_formats[0];
+               else
+                       vs_crtc_state->output_fmt = MEDIA_BUS_FMT_FIXED;
+       } else {
+               vs_crtc_state->output_fmt = bridge_state->input_bus_cfg.format;
+       }
+
+       switch (vs_crtc_state->output_fmt) {
+       case MEDIA_BUS_FMT_FIXED:
+       case MEDIA_BUS_FMT_RGB565_1X16:
+       case MEDIA_BUS_FMT_RGB666_1X18:
+       case MEDIA_BUS_FMT_RGB888_1X24:
+       case MEDIA_BUS_FMT_RGB666_1X24_CPADHI:
+       case MEDIA_BUS_FMT_RGB101010_1X30:
+       case MEDIA_BUS_FMT_UYYVYY8_0_5X24:
+       case MEDIA_BUS_FMT_UYVY8_1X16:
+       case MEDIA_BUS_FMT_YUV8_1X24:
+       case MEDIA_BUS_FMT_UYYVYY10_0_5X30:
+       case MEDIA_BUS_FMT_UYVY10_1X20:
+       case MEDIA_BUS_FMT_YUV10_1X30:
+               ret = 0;
+               break;
+       default:
+               ret = -EINVAL;
+               break;
+       }
+
+       /* If MEDIA_BUS_FMT_FIXED, set it to default value */
+       if (vs_crtc_state->output_fmt == MEDIA_BUS_FMT_FIXED)
+               vs_crtc_state->output_fmt = MEDIA_BUS_FMT_RGB888_1X24;
+
+       return ret;
+}
+
+static const struct drm_encoder_helper_funcs encoder_helper_funcs = {
+       .atomic_check = encoder_atomic_check,
+       .atomic_enable = encoder_atomic_enable,
+};
+
+static int encoder_bind(struct device *dev, struct device *master, void *data)
+{
+       struct drm_device *drm_dev = data;
+       struct simple_encoder *simple = dev_get_drvdata(dev);
+       struct drm_encoder *encoder;
+       struct drm_bridge *bridge;
+       int ret;
+
+       encoder = &simple->encoder;
+
+       ret = drmm_encoder_init(drm_dev, encoder, NULL, simple->priv->encoder_type, NULL);
+       if (ret)
+               return ret;
+
+       drm_encoder_helper_add(encoder, &encoder_helper_funcs);
+
+       encoder->possible_crtcs =
+                       drm_of_find_possible_crtcs(drm_dev, dev->of_node);
+
+       /* output port is port1*/
+       bridge = devm_drm_of_get_bridge(dev, dev->of_node, 1, 0);
+       if (IS_ERR(bridge))
+               return 0;
+
+       return drm_bridge_attach(encoder, bridge, NULL, 0);
+}
+
+static const struct component_ops encoder_component_ops = {
+       .bind = encoder_bind,
+};
+
+static const struct of_device_id simple_encoder_dt_match[] = {
+       { .compatible = "starfive,dsi-encoder", .data = &dsi_priv},
+       {},
+};
+MODULE_DEVICE_TABLE(of, simple_encoder_dt_match);
+
+static int encoder_probe(struct platform_device *pdev)
+{
+       struct device *dev = &pdev->dev;
+       struct simple_encoder *simple;
+       int ret;
+
+       simple = devm_kzalloc(dev, sizeof(*simple), GFP_KERNEL);
+       if (!simple)
+               return -ENOMEM;
+
+       simple->priv = of_device_get_match_data(dev);
+
+       simple->dev = dev;
+
+       dev_set_drvdata(dev, simple);
+
+       ret = encoder_parse_dt(dev);
+       if (ret)
+               return ret;
+
+       return component_add(dev, &encoder_component_ops);
+}
+
+static int encoder_remove(struct platform_device *pdev)
+{
+       struct device *dev = &pdev->dev;
+
+       component_del(dev, &encoder_component_ops);
+       dev_set_drvdata(dev, NULL);
+
+       return 0;
+}
+
+struct platform_driver simple_encoder_driver = {
+       .probe = encoder_probe,
+       .remove = encoder_remove,
+       .driver = {
+               .name = "vs-simple-encoder",
+               .of_match_table = of_match_ptr(simple_encoder_dt_match),
+       },
+};
+
+MODULE_DESCRIPTION("Simple Encoder Driver");
+MODULE_LICENSE("GPL");
drivers/gpu/drm/verisilicon/vs_simple_enc.h new file +23 -1
new file mode 100644
index 000000000000..fb33ca9e18d6
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2022 VeriSilicon Holdings Co., Ltd.
+ */
+
+#ifndef __VS_SIMPLE_ENC_H_
+#define __VS_SIMPLE_ENC_H_
+
+struct simple_encoder_priv {
+       unsigned char encoder_type;
+};
+
+struct simple_encoder {
+       struct drm_encoder encoder;
+       struct device *dev;
+       const struct simple_encoder_priv *priv;
+       struct regmap *dss_regmap;
+       unsigned int offset;
+       unsigned int mask;
+};
+
+extern struct platform_driver simple_encoder_driver;
+#endif /* __VS_SIMPLE_ENC_H_ */
--

2.34.1

Signature · 2 lines
With best wishes
Dmitry