Input: SoC button array: add mapping for airplane mode button
Subsystems (2)
PATCH 1/1 Input: SoC button array: add mapping for airplane mode button
From: Christoffer Sandberg <[email protected]>
This add a mapping for the airplane mode button on the TUXEDO Pulse Gen3.
While it is physically a key it behaves more like a switch, sending a key down on first press and a key up on 2nd press. Therefor the switch event is used here. Besides this behaviour it uses the HID usage-id 0xc6 (Wireless Radio Button) and not 0xc8 (Wireless Radio Slider Switch), but since neither 0xc6 nor 0xc8 are currently implemented at all in soc_button_array this not to standard behaviour is not put behind a quirk for the moment.
--- drivers/input/misc/soc_button_array.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/input/misc/soc_button_array.c +5 -0
@@ -299,6 +299,11 @@ static int soc_button_parse_btn_desc(struct device *dev, info->name ="power" ; info->event_code =KEY_POWER ; info->wakeup = true; + }else if (upage ==0x01 && usage ==0xc6 ) { + info->name ="airplane mode switch" ; + info->event_type =EV_SW ; + info->event_code =SW_RFKILL_ALL ; + info->active_low = false; }else if (upage ==0x01 && usage ==0xca ) { info->name ="rotation lock switch" ; info->event_type =EV_SW ;
Signature · 1 line
2.34.1
Am 15.12.23 um 18:17 schrieb Werner Sembach:
Quoted 11 lines
From: Christoffer Sandberg <[email protected]>
This add a mapping for the airplane mode button on the TUXEDO Pulse Gen3.
While it is physically a key it behaves more like a switch, sending a key down on first press and a key up on 2nd press. Therefor the switch event is used here. Besides this behaviour it uses the HID usage-id
0xc6(Wireless Radio Button) and not0xc8(Wireless Radio Slider Switch), but since neither0xc6nor0xc8are currently implemented at all insoc_button_arraythis not to standard behaviour is not put behind a quirk for the moment.
Quoted 2 lines
Signed-off-by Christoffer Sandberg <[email protected]>Signed-off-by Werner Sembach <[email protected]>
Quoted 20 lines
--- drivers/input/misc/soc_button_array.c | 5 +++++ 1 file changed, 5 insertions(+)drivers/input/misc/soc_button_array.c +5
-0@@ -299,6 +299,11 @@ static int soc_button_parse_btn_desc(struct device *dev, info->name ="power" ; info->event_code =KEY_POWER ; info->wakeup = true; + }else if (upage ==0x01 && usage ==0xc6 ) { + info->name ="airplane mode switch" ; + info->event_type =EV_SW ; + info->event_code =SW_RFKILL_ALL ; + info->active_low = false; }else if (upage ==0x01 && usage ==0xca ) { info->name ="rotation lock switch" ; info->event_type =EV_SW ;
Am 15.12.23 um 18:17 schrieb Werner Sembach:
Quoted 11 lines
From: Christoffer Sandberg <[email protected]>
This add a mapping for the airplane mode button on the TUXEDO Pulse Gen3.
While it is physically a key it behaves more like a switch, sending a key down on first press and a key up on 2nd press. Therefor the switch event is used here. Besides this behaviour it uses the HID usage-id
0xc6(Wireless Radio Button) and not0xc8(Wireless Radio Slider Switch), but since neither0xc6nor0xc8are currently implemented at all insoc_button_arraythis not to standard behaviour is not put behind a quirk for the moment.
Quoted 2 lines
Signed-off-by Christoffer Sandberg <[email protected]>Signed-off-by Werner Sembach <[email protected]>
For reference: https://bugzilla.kernel.org/show_bug.cgi?id=214259
Quoted 20 lines
--- drivers/input/misc/soc_button_array.c | 5 +++++ 1 file changed, 5 insertions(+)drivers/input/misc/soc_button_array.c +5
-0@@ -299,6 +299,11 @@ static int soc_button_parse_btn_desc(struct device *dev, info->name ="power" ; info->event_code =KEY_POWER ; info->wakeup = true; + }else if (upage ==0x01 && usage ==0xc6 ) { + info->name ="airplane mode switch" ; + info->event_type =EV_SW ; + info->event_code =SW_RFKILL_ALL ; + info->active_low = false; }else if (upage ==0x01 && usage ==0xca ) { info->name ="rotation lock switch" ; info->event_type =EV_SW ;
Quoted 11 lines · Werner Sembach
From: Christoffer Sandberg <[email protected]>
This add a mapping for the airplane mode button on the TUXEDO Pulse Gen3.
While it is physically a key it behaves more like a switch, sending a key down on first press and a key up on 2nd press. Therefor the switch event is used here. Besides this behaviour it uses the HID usage-id
0xc6(Wireless Radio Button) and not0xc8(Wireless Radio Slider Switch), but since neither0xc6nor0xc8are currently implemented at all insoc_button_arraythis not to standard behaviour is not put behind a quirk for the moment.
Quoted 2 lines
Signed-off-by Christoffer Sandberg <[email protected]>Signed-off-by Werner Sembach <[email protected]>
Applied, thank you.
Signature · 1 line
Dmitry