fix vt-d hard lockup when hotplug ATS capable device
Subsystems (3)
v3 cover fix vt-d hard lockup when hotplug ATS capable device
This patchset is used to fix vt-d hard lockup reported when surpprise unplug ATS capable endpoint device connects to system via PCIe switch as following topology.
+-[0000:15]-+-00.0 Intel Corporation Ice Lake Memory Map/VT-d
| +-00.1 Intel Corporation Ice Lake Mesh 2 PCIe
| +-00.2 Intel Corporation Ice Lake RAS
| +-00.4 Intel Corporation Device 0b23
| \-01.0-[16-1b]----00.0-[17-1b]--+-00.0-[18]----00.0 NVIDIA Corporation Device 2324
| +-01.0-[19]----00.0
Mellanox Technologies MT2910 Family [ConnectX-7]
User brought endpoint device 19:00.0's link down by flap it's hotplug capable slot 17:01.0 link control register, as sequence DLLSC response, pciehp_ist() will unload device driver and power it off, durning device driver is unloading an iommu devTlb flush request issued to that link down device, thus a long time completion/timeout waiting in interrupt context causes continuous hard lockup warnning and system hang.
[ 4211.433662] pcieport 0000:17:01.0: pciehp: Slot(108): Link Down
[ 4211.433664] pcieport 0000:17:01.0: pciehp: Slot(108): Card not present
[ 4223.822591] NMI watchdog: Watchdog detected hard LOCKUP on cpu 144
[ 4223.822622] CPU: 144 PID: 1422 Comm: irq/57-pciehp Kdump: loaded Tainted: G S
OE kernel version xxxx
[ 4223.822623] Hardware name: vendorname xxxx 666-106,
BIOS 01.01.02.03.01 05/15/2023
[ 4223.822623] RIP: 0010:qi_submit_sync+0x2c0/0x490
[ 4223.822624] Code: 48 be 00 00 00 00 00 08 00 00 49 85 74 24 20 0f 95 c1 48 8b
57 10 83 c1 04 83 3c 1a 03 0f 84 a2 01 00 00 49 8b 04 24 8b 70 34 <40> f6 c6 1
0 74 17 49 8b 04 24 8b 80 80 00 00 00 89 c2 d3 fa 41 39
[ 4223.822624] RSP: 0018:ffffc4f074f0bbb8 EFLAGS: 00000093
[ 4223.822625] RAX: ffffc4f040059000 RBX: 0000000000000014 RCX: 0000000000000005
[ 4223.822625] RDX: ffff9f3841315800 RSI: 0000000000000000 RDI: ffff9f38401a8340
[ 4223.822625] RBP: ffff9f38401a8340 R08: ffffc4f074f0bc00 R09: 0000000000000000
[ 4223.822626] R10: 0000000000000010 R11: 0000000000000018 R12: ffff9f384005e200
[ 4223.822626] R13: 0000000000000004 R14: 0000000000000046 R15: 0000000000000004
[ 4223.822626] FS: 0000000000000000(0000) GS:ffffa237ae400000(0000)
knlGS:0000000000000000
[ 4223.822627] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4223.822627] CR2: 00007ffe86515d80 CR3: 000002fd3000a001 CR4: 0000000000770ee0
[ 4223.822627] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 4223.822628] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 4223.822628] PKRU: 55555554
[ 4223.822628] Call Trace:
[ 4223.822628] qi_flush_dev_iotlb+0xb1/0xd0
[ 4223.822628] __dmar_remove_one_dev_info+0x224/0x250
[ 4223.822629] dmar_remove_one_dev_info+0x3e/0x50
[ 4223.822629] intel_iommu_release_device+0x1f/0x30
[ 4223.822629] iommu_release_device+0x33/0x60
[ 4223.822629] iommu_bus_notifier+0x7f/0x90
[ 4223.822630] blocking_notifier_call_chain+0x60/0x90
[ 4223.822630] device_del+0x2e5/0x420
[ 4223.822630] pci_remove_bus_device+0x70/0x110
[ 4223.822630] pciehp_unconfigure_device+0x7c/0x130
[ 4223.822631] pciehp_disable_slot+0x6b/0x100
[ 4223.822631] pciehp_handle_presence_or_link_change+0xd8/0x320
[ 4223.822631] pciehp_ist+0x176/0x180
[ 4223.822631] ? irq_finalize_oneshot.part.50+0x110/0x110
[ 4223.822632] irq_thread_fn+0x19/0x50
[ 4223.822632] irq_thread+0x104/0x190
[ 4223.822632] ? irq_forced_thread_fn+0x90/0x90
[ 4223.822632] ? irq_thread_check_affinity+0xe0/0xe0
[ 4223.822633] kthread+0x114/0x130
[ 4223.822633] ? __kthread_cancel_work+0x40/0x40
[ 4223.822633] ret_from_fork+0x1f/0x30
[ 4223.822633] Kernel panic - not syncing: Hard LOCKUP
[ 4223.822634] CPU: 144 PID: 1422 Comm: irq/57-pciehp Kdump: loaded Tainted: G S
OE kernel version xxxx
[ 4223.822634] Hardware name: vendorname xxxx 666-106,
BIOS 01.01.02.03.01 05/15/2023
[ 4223.822634] Call Trace:
[ 4223.822634] <NMI>
[ 4223.822635] dump_stack+0x6d/0x88
[ 4223.822635] panic+0x101/0x2d0
[ 4223.822635] ? ret_from_fork+0x11/0x30
[ 4223.822635] nmi_panic.cold.14+0xc/0xc
[ 4223.822636] watchdog_overflow_callback.cold.8+0x6d/0x81
[ 4223.822636] __perf_event_overflow+0x4f/0xf0
[ 4223.822636] handle_pmi_common+0x1ef/0x290
[ 4223.822636] ? __set_pte_vaddr+0x28/0x40
[ 4223.822637] ? flush_tlb_one_kernel+0xa/0x20
[ 4223.822637] ? __native_set_fixmap+0x24/0x30
[ 4223.822637] ? ghes_copy_tofrom_phys+0x70/0x100
[ 4223.822637] ? __ghes_peek_estatus.isra.16+0x49/0xa0
[ 4223.822637] intel_pmu_handle_irq+0xba/0x2b0
[ 4223.822638] perf_event_nmi_handler+0x24/0x40
[ 4223.822638] nmi_handle+0x4d/0xf0
[ 4223.822638] default_do_nmi+0x49/0x100
[ 4223.822638] exc_nmi+0x134/0x180
[ 4223.822639] end_repeat_nmi+0x16/0x67
[ 4223.822639] RIP: 0010:qi_submit_sync+0x2c0/0x490
[ 4223.822639] Code: 48 be 00 00 00 00 00 08 00 00 49 85 74 24 20 0f 95 c1 48 8b
57 10 83 c1 04 83 3c 1a 03 0f 84 a2 01 00 00 49 8b 04 24 8b 70 34 <40> f6 c6 10
74 17 49 8b 04 24 8b 80 80 00 00 00 89 c2 d3 fa 41 39
[ 4223.822640] RSP: 0018:ffffc4f074f0bbb8 EFLAGS: 00000093
[ 4223.822640] RAX: ffffc4f040059000 RBX: 0000000000000014 RCX: 0000000000000005
[ 4223.822640] RDX: ffff9f3841315800 RSI: 0000000000000000 RDI: ffff9f38401a8340
[ 4223.822641] RBP: ffff9f38401a8340 R08: ffffc4f074f0bc00 R09: 0000000000000000
[ 4223.822641] R10: 0000000000000010 R11: 0000000000000018 R12: ffff9f384005e200
[ 4223.822641] R13: 0000000000000004 R14: 0000000000000046 R15: 0000000000000004
[ 4223.822641] ? qi_submit_sync+0x2c0/0x490
[ 4223.822642] ? qi_submit_sync+0x2c0/0x490
[ 4223.822642] </NMI>
[ 4223.822642] qi_flush_dev_iotlb+0xb1/0xd0
[ 4223.822642] __dmar_remove_one_dev_info+0x224/0x250
[ 4223.822643] dmar_remove_one_dev_info+0x3e/0x50
[ 4223.822643] intel_iommu_release_device+0x1f/0x30
[ 4223.822643] iommu_release_device+0x33/0x60
[ 4223.822643] iommu_bus_notifier+0x7f/0x90
[ 4223.822644] blocking_notifier_call_chain+0x60/0x90
[ 4223.822644] device_del+0x2e5/0x420
[ 4223.822644] pci_remove_bus_device+0x70/0x110
[ 4223.822644] pciehp_unconfigure_device+0x7c/0x130
[ 4223.822644] pciehp_disable_slot+0x6b/0x100
[ 4223.822645] pciehp_handle_presence_or_link_change+0xd8/0x320
[ 4223.822645] pciehp_ist+0x176/0x180
[ 4223.822645] ? irq_finalize_oneshot.part.50+0x110/0x110
[ 4223.822645] irq_thread_fn+0x19/0x50
[ 4223.822646] irq_thread+0x104/0x190
[ 4223.822646] ? irq_forced_thread_fn+0x90/0x90
[ 4223.822646] ? irq_thread_check_affinity+0xe0/0xe0
[ 4223.822646] kthread+0x114/0x130
[ 4223.822647] ? __kthread_cancel_work+0x40/0x40
[ 4223.822647] ret_from_fork+0x1f/0x30
[ 4223.822647] Kernel Offset: 0x6400000 from 0xffffffff81000000 (relocationrange: 0xffffffff80000000-0xffffffffbfffffff)
Make a quick fix by checking the device's error_state in devtlb_invalidation_with_pasid() to avoid sending meaningless devTLB flush request to link down device that is set to pci_channel_io_perm_failure and then powered off in
pciehp_ist()
pciehp_handle_presence_or_link_change()
pciehp_disable_slot()
remove_board()
pciehp_unconfigure_device()
safe_removal unplug doesn't trigger such issue.
and this fix works for all supprise_removal unplug operations.
This patchset was tested by [email protected] on stable-6.7rc4.
change log:
v3:
- fix commit description typo.
v2:
- revise commit[1] description part accoring to Lukas' suggestion.
- revise commit[2] description to clarify the issue's impact.
v1:
- https://lore.kernel.org/lkml/[email protected]/T/
Thanks,
Ethan
Ethan Zhao (2):
PCI: make pci_dev_is_disconnected() helper public for other drivers iommu/vt-d: don's issue devTLB flush request when device is
disconnected
drivers/iommu/intel/pasid.c | 21 ++++++++++++++++++++- drivers/pci/pci.h | 5 ----- include/linux/pci.h | 5 +++++ 3 files changed, 25 insertions(+), 6 deletions(-)
Signature · 1 line
2.31.1
PATCH v3 1/2 PCI: make pci_dev_is_disconnected() helper public for
Make pci_dev_is_disconnected() public so that it can be called from Intel vt-d driver to quick fix/workaround the SURPPRISE_REMOVAL unplug hang issue for those ATS capable devices on PCIe switch downstream ports.
--- drivers/pci/pci.h | 5 ----- include/linux/pci.h | 5 +++++ 2 files changed, 5 insertions(+), 5 deletions(-)
drivers/pci/pci.h +0 -5
@@ -366,11 +366,6 @@ static inline int pci_dev_set_disconnected(struct pci_dev *dev, void *unused)return 0 ; } -static inline bool pci_dev_is_disconnected (const struct pci_dev *dev) -{ -return dev->error_state == pci_channel_io_perm_failure; -} -/* pci_dev priv_flags */ #define PCI_DEV_ADDED 0#define PCI_DPC_RECOVERED 1
include/linux/pci.h +5 -0
@@ -2503,6 +2503,11 @@ static inline struct pci_dev *pcie_find_root_port(struct pci_dev *dev)return NULL ; } +static inline bool pci_dev_is_disconnected (const struct pci_dev *dev) +{ +return dev->error_state == pci_channel_io_perm_failure; +} +void pci_request_acs (void );bool pci_acs_enabled (struct pci_dev *pdev,u16 acs_flags); bool pci_acs_path_enabled(struct pci_dev *start,
Signature · 1 line
2.31.1
PATCH v3 2/2 iommu/vt-d: don's issue devTLB flush request when device is disconnected
In reply to Ethan ZhaoFor those endpoint devices connect to system via hotplug capable ports, users could request a warm reset to the device by flapping device's link through setting the slot's link control register, as pciehpt_ist() DLLSC interrupt sequence response, pciehp will unload the device driver and then power it off. thus cause an IOMMU devTLB flush request for device to be sent and a long time completion/timeout waiting in interrupt context.
That would cause following continuous hard lockup warning and system hang
[ 4211.433662] pcieport 0000:17:01.0: pciehp: Slot(108): Link Down
[ 4211.433664] pcieport 0000:17:01.0: pciehp: Slot(108): Card not present
[ 4223.822591] NMI watchdog: Watchdog detected hard LOCKUP on cpu 144
[ 4223.822622] CPU: 144 PID: 1422 Comm: irq/57-pciehp Kdump: loaded Tainted: G S
OE kernel version xxxx
[ 4223.822623] Hardware name: vendorname xxxx 666-106,
BIOS 01.01.02.03.01 05/15/2023
[ 4223.822623] RIP: 0010:qi_submit_sync+0x2c0/0x490
[ 4223.822624] Code: 48 be 00 00 00 00 00 08 00 00 49 85 74 24 20 0f 95 c1 48 8b
57 10 83 c1 04 83 3c 1a 03 0f 84 a2 01 00 00 49 8b 04 24 8b 70 34 <40> f6 c6 1
0 74 17 49 8b 04 24 8b 80 80 00 00 00 89 c2 d3 fa 41 39
[ 4223.822624] RSP: 0018:ffffc4f074f0bbb8 EFLAGS: 00000093
[ 4223.822625] RAX: ffffc4f040059000 RBX: 0000000000000014 RCX: 0000000000000005
[ 4223.822625] RDX: ffff9f3841315800 RSI: 0000000000000000 RDI: ffff9f38401a8340
[ 4223.822625] RBP: ffff9f38401a8340 R08: ffffc4f074f0bc00 R09: 0000000000000000
[ 4223.822626] R10: 0000000000000010 R11: 0000000000000018 R12: ffff9f384005e200
[ 4223.822626] R13: 0000000000000004 R14: 0000000000000046 R15: 0000000000000004
[ 4223.822626] FS: 0000000000000000(0000) GS:ffffa237ae400000(0000)
knlGS:0000000000000000
[ 4223.822627] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 4223.822627] CR2: 00007ffe86515d80 CR3: 000002fd3000a001 CR4: 0000000000770ee0
[ 4223.822627] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 4223.822628] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 4223.822628] PKRU: 55555554
[ 4223.822628] Call Trace:
[ 4223.822628] qi_flush_dev_iotlb+0xb1/0xd0
[ 4223.822628] __dmar_remove_one_dev_info+0x224/0x250
[ 4223.822629] dmar_remove_one_dev_info+0x3e/0x50
[ 4223.822629] intel_iommu_release_device+0x1f/0x30
[ 4223.822629] iommu_release_device+0x33/0x60
[ 4223.822629] iommu_bus_notifier+0x7f/0x90
[ 4223.822630] blocking_notifier_call_chain+0x60/0x90
[ 4223.822630] device_del+0x2e5/0x420
[ 4223.822630] pci_remove_bus_device+0x70/0x110
[ 4223.822630] pciehp_unconfigure_device+0x7c/0x130
[ 4223.822631] pciehp_disable_slot+0x6b/0x100
[ 4223.822631] pciehp_handle_presence_or_link_change+0xd8/0x320
[ 4223.822631] pciehp_ist+0x176/0x180
[ 4223.822631] ? irq_finalize_oneshot.part.50+0x110/0x110
[ 4223.822632] irq_thread_fn+0x19/0x50
[ 4223.822632] irq_thread+0x104/0x190
[ 4223.822632] ? irq_forced_thread_fn+0x90/0x90
[ 4223.822632] ? irq_thread_check_affinity+0xe0/0xe0
[ 4223.822633] kthread+0x114/0x130
[ 4223.822633] ? __kthread_cancel_work+0x40/0x40
[ 4223.822633] ret_from_fork+0x1f/0x30
[ 4223.822633] Kernel panic - not syncing: Hard LOCKUP
[ 4223.822634] CPU: 144 PID: 1422 Comm: irq/57-pciehp Kdump: loaded Tainted: G S
OE kernel version xxxx
[ 4223.822634] Hardware name: vendorname xxxx 666-106,
BIOS 01.01.02.03.01 05/15/2023
[ 4223.822634] Call Trace:
[ 4223.822634] <NMI>
[ 4223.822635] dump_stack+0x6d/0x88
[ 4223.822635] panic+0x101/0x2d0
[ 4223.822635] ? ret_from_fork+0x11/0x30
[ 4223.822635] nmi_panic.cold.14+0xc/0xc
[ 4223.822636] watchdog_overflow_callback.cold.8+0x6d/0x81
[ 4223.822636] __perf_event_overflow+0x4f/0xf0
[ 4223.822636] handle_pmi_common+0x1ef/0x290
[ 4223.822636] ? __set_pte_vaddr+0x28/0x40
[ 4223.822637] ? flush_tlb_one_kernel+0xa/0x20
[ 4223.822637] ? __native_set_fixmap+0x24/0x30
[ 4223.822637] ? ghes_copy_tofrom_phys+0x70/0x100
[ 4223.822637] ? __ghes_peek_estatus.isra.16+0x49/0xa0
[ 4223.822637] intel_pmu_handle_irq+0xba/0x2b0
[ 4223.822638] perf_event_nmi_handler+0x24/0x40
[ 4223.822638] nmi_handle+0x4d/0xf0
[ 4223.822638] default_do_nmi+0x49/0x100
[ 4223.822638] exc_nmi+0x134/0x180
[ 4223.822639] end_repeat_nmi+0x16/0x67
[ 4223.822639] RIP: 0010:qi_submit_sync+0x2c0/0x490
[ 4223.822639] Code: 48 be 00 00 00 00 00 08 00 00 49 85 74 24 20 0f 95 c1 48 8b
57 10 83 c1 04 83 3c 1a 03 0f 84 a2 01 00 00 49 8b 04 24 8b 70 34 <40> f6 c6 10
74 17 49 8b 04 24 8b 80 80 00 00 00 89 c2 d3 fa 41 39
[ 4223.822640] RSP: 0018:ffffc4f074f0bbb8 EFLAGS: 00000093
[ 4223.822640] RAX: ffffc4f040059000 RBX: 0000000000000014 RCX: 0000000000000005
[ 4223.822640] RDX: ffff9f3841315800 RSI: 0000000000000000 RDI: ffff9f38401a8340
[ 4223.822641] RBP: ffff9f38401a8340 R08: ffffc4f074f0bc00 R09: 0000000000000000
[ 4223.822641] R10: 0000000000000010 R11: 0000000000000018 R12: ffff9f384005e200
[ 4223.822641] R13: 0000000000000004 R14: 0000000000000046 R15: 0000000000000004
[ 4223.822641] ? qi_submit_sync+0x2c0/0x490
[ 4223.822642] ? qi_submit_sync+0x2c0/0x490
[ 4223.822642] </NMI>
[ 4223.822642] qi_flush_dev_iotlb+0xb1/0xd0
[ 4223.822642] __dmar_remove_one_dev_info+0x224/0x250
[ 4223.822643] dmar_remove_one_dev_info+0x3e/0x50
[ 4223.822643] intel_iommu_release_device+0x1f/0x30
[ 4223.822643] iommu_release_device+0x33/0x60
[ 4223.822643] iommu_bus_notifier+0x7f/0x90
[ 4223.822644] blocking_notifier_call_chain+0x60/0x90
[ 4223.822644] device_del+0x2e5/0x420
[ 4223.822644] pci_remove_bus_device+0x70/0x110
[ 4223.822644] pciehp_unconfigure_device+0x7c/0x130
[ 4223.822644] pciehp_disable_slot+0x6b/0x100
[ 4223.822645] pciehp_handle_presence_or_link_change+0xd8/0x320
[ 4223.822645] pciehp_ist+0x176/0x180
[ 4223.822645] ? irq_finalize_oneshot.part.50+0x110/0x110
[ 4223.822645] irq_thread_fn+0x19/0x50
[ 4223.822646] irq_thread+0x104/0x190
[ 4223.822646] ? irq_forced_thread_fn+0x90/0x90
[ 4223.822646] ? irq_thread_check_affinity+0xe0/0xe0
[ 4223.822646] kthread+0x114/0x130
[ 4223.822647] ? __kthread_cancel_work+0x40/0x40
[ 4223.822647] ret_from_fork+0x1f/0x30
[ 4223.822647] Kernel Offset: 0x6400000 from 0xffffffff81000000 (relocationrange: 0xffffffff80000000-0xffffffffbfffffff)
Fix it by checking the device's error_state in devtlb_invalidation_with_pasid() to avoid sending meaningless devTLB flush request to link down device that is set to pci_channel_io_perm_failure and then powered off in
pciehp_ist()
pciehp_handle_presence_or_link_change()
pciehp_disable_slot()
remove_board()
pciehp_unconfigure_device()
For SAFE_REMOVAL unplug, link is alive when iommu releases device and issues devTLB invalidate request, wouldn't trigger such issue.
This patch works for all kinds of SURPPRISE_REMOVAL unplug operation.
--- drivers/iommu/intel/pasid.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
drivers/iommu/intel/pasid.c +17 -0
@@ -476,6 +476,23 @@ devtlb_invalidation_with_pasid(struct intel_iommu *iommu, {struct device_domain_info *info;u16 sid, qdep, pfsid; +struct pci_dev *pdev; + + pdev =to_pci_dev (dev); +if (!pdev) +return ; + +/* +* If endpoint device's link was brough down by user's pci configuration +* access to it's hotplug capable slot link control register, as sequence +* response for DLLSC, pciehp_ist() will set the device error_state to +* pci_channel_io_perm_failure. Checking device's state here to avoid +* issuing meaningless devTLB flush request to it, that might cause lockup +* warning or deadlock because too long time waiting in interrupt context. +*/ + +if (pci_dev_is_disconnected (pdev)) +return ; info =dev_iommu_priv_get (dev);if (!info || !info->ats_enabled)
Signature · 1 line
2.31.1
Baolu Lu
maintainerRe: [PATCH v3 2/2] iommu/vt-d: don's issue devTLB flush request when device is disconnected
Quoted 157 lines · Ethan Zhao
For those endpoint devices connect to system via hotplug capable ports, users could request a warm reset to the device by flapping device's link through setting the slot's link control register, as
pciehpt_ist()DLLSC interrupt sequence response, pciehp will unload the device driver and then power it off. thus cause an IOMMU devTLB flush request for device to be sent and a long time completion/timeout waiting in interrupt context.That would cause following continuous hard lockup warning and system hang
[ 4211.433662] pcieport 0000:17:01.0: pciehp: Slot(108): Link Down [ 4211.433664] pcieport 0000:17:01.0: pciehp: Slot(108): Card not present [ 4223.822591] NMI watchdog: Watchdog detected hard LOCKUP on cpu 144 [ 4223.822622] CPU: 144 PID: 1422 Comm: irq/57-pciehp Kdump: loaded Tainted: G S OE kernel version xxxx [ 4223.822623] Hardware name: vendorname xxxx 666-106, BIOS 01.01.02.03.01 05/15/2023 [ 4223.822623] RIP: 0010:qi_submit_sync+0x2c0/0x490 [ 4223.822624] Code: 48 be 00 00 00 00 00 08 00 00 49 85 74 24 20 0f 95 c1 48 8b 57 10 83 c1 04 83 3c 1a 03 0f 84 a2 01 00 00 49 8b 04 24 8b 70 34 <40> f6 c6 1 0 74 17 49 8b 04 24 8b 80 80 00 00 00 89 c2 d3 fa 41 39 [ 4223.822624] RSP: 0018:ffffc4f074f0bbb8 EFLAGS: 00000093 [ 4223.822625] RAX: ffffc4f040059000 RBX: 0000000000000014 RCX: 0000000000000005 [ 4223.822625] RDX: ffff9f3841315800 RSI: 0000000000000000 RDI: ffff9f38401a8340 [ 4223.822625] RBP: ffff9f38401a8340 R08: ffffc4f074f0bc00 R09: 0000000000000000 [ 4223.822626] R10: 0000000000000010 R11: 0000000000000018 R12: ffff9f384005e200 [ 4223.822626] R13: 0000000000000004 R14: 0000000000000046 R15: 0000000000000004 [ 4223.822626] FS: 0000000000000000(0000) GS:ffffa237ae400000(0000) knlGS:0000000000000000 [ 4223.822627] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4223.822627] CR2: 00007ffe86515d80 CR3: 000002fd3000a001 CR4: 0000000000770ee0 [ 4223.822627] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4223.822628] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 4223.822628] PKRU: 55555554 [ 4223.822628] Call Trace: [ 4223.822628] qi_flush_dev_iotlb+0xb1/0xd0 [ 4223.822628] __dmar_remove_one_dev_info+0x224/0x250 [ 4223.822629] dmar_remove_one_dev_info+0x3e/0x50 [ 4223.822629] intel_iommu_release_device+0x1f/0x30 [ 4223.822629] iommu_release_device+0x33/0x60 [ 4223.822629] iommu_bus_notifier+0x7f/0x90 [ 4223.822630] blocking_notifier_call_chain+0x60/0x90 [ 4223.822630] device_del+0x2e5/0x420 [ 4223.822630] pci_remove_bus_device+0x70/0x110 [ 4223.822630] pciehp_unconfigure_device+0x7c/0x130 [ 4223.822631] pciehp_disable_slot+0x6b/0x100 [ 4223.822631] pciehp_handle_presence_or_link_change+0xd8/0x320 [ 4223.822631] pciehp_ist+0x176/0x180 [ 4223.822631] ? irq_finalize_oneshot.part.50+0x110/0x110 [ 4223.822632] irq_thread_fn+0x19/0x50 [ 4223.822632] irq_thread+0x104/0x190 [ 4223.822632] ? irq_forced_thread_fn+0x90/0x90 [ 4223.822632] ? irq_thread_check_affinity+0xe0/0xe0 [ 4223.822633] kthread+0x114/0x130 [ 4223.822633] ? __kthread_cancel_work+0x40/0x40 [ 4223.822633] ret_from_fork+0x1f/0x30 [ 4223.822633] Kernel panic - not syncing: Hard LOCKUP [ 4223.822634] CPU: 144 PID: 1422 Comm: irq/57-pciehp Kdump: loaded Tainted: G S OE kernel version xxxx [ 4223.822634] Hardware name: vendorname xxxx 666-106, BIOS 01.01.02.03.01 05/15/2023 [ 4223.822634] Call Trace: [ 4223.822634] <NMI> [ 4223.822635] dump_stack+0x6d/0x88 [ 4223.822635] panic+0x101/0x2d0 [ 4223.822635] ? ret_from_fork+0x11/0x30 [ 4223.822635] nmi_panic.cold.14+0xc/0xc [ 4223.822636] watchdog_overflow_callback.cold.8+0x6d/0x81 [ 4223.822636] __perf_event_overflow+0x4f/0xf0 [ 4223.822636] handle_pmi_common+0x1ef/0x290 [ 4223.822636] ? __set_pte_vaddr+0x28/0x40 [ 4223.822637] ? flush_tlb_one_kernel+0xa/0x20 [ 4223.822637] ? __native_set_fixmap+0x24/0x30 [ 4223.822637] ? ghes_copy_tofrom_phys+0x70/0x100 [ 4223.822637] ? __ghes_peek_estatus.isra.16+0x49/0xa0 [ 4223.822637] intel_pmu_handle_irq+0xba/0x2b0 [ 4223.822638] perf_event_nmi_handler+0x24/0x40 [ 4223.822638] nmi_handle+0x4d/0xf0 [ 4223.822638] default_do_nmi+0x49/0x100 [ 4223.822638] exc_nmi+0x134/0x180 [ 4223.822639] end_repeat_nmi+0x16/0x67 [ 4223.822639] RIP: 0010:qi_submit_sync+0x2c0/0x490 [ 4223.822639] Code: 48 be 00 00 00 00 00 08 00 00 49 85 74 24 20 0f 95 c1 48 8b 57 10 83 c1 04 83 3c 1a 03 0f 84 a2 01 00 00 49 8b 04 24 8b 70 34 <40> f6 c6 10 74 17 49 8b 04 24 8b 80 80 00 00 00 89 c2 d3 fa 41 39 [ 4223.822640] RSP: 0018:ffffc4f074f0bbb8 EFLAGS: 00000093 [ 4223.822640] RAX: ffffc4f040059000 RBX: 0000000000000014 RCX: 0000000000000005 [ 4223.822640] RDX: ffff9f3841315800 RSI: 0000000000000000 RDI: ffff9f38401a8340 [ 4223.822641] RBP: ffff9f38401a8340 R08: ffffc4f074f0bc00 R09: 0000000000000000 [ 4223.822641] R10: 0000000000000010 R11: 0000000000000018 R12: ffff9f384005e200 [ 4223.822641] R13: 0000000000000004 R14: 0000000000000046 R15: 0000000000000004 [ 4223.822641] ? qi_submit_sync+0x2c0/0x490 [ 4223.822642] ? qi_submit_sync+0x2c0/0x490 [ 4223.822642] </NMI> [ 4223.822642] qi_flush_dev_iotlb+0xb1/0xd0 [ 4223.822642] __dmar_remove_one_dev_info+0x224/0x250 [ 4223.822643] dmar_remove_one_dev_info+0x3e/0x50 [ 4223.822643] intel_iommu_release_device+0x1f/0x30 [ 4223.822643] iommu_release_device+0x33/0x60 [ 4223.822643] iommu_bus_notifier+0x7f/0x90 [ 4223.822644] blocking_notifier_call_chain+0x60/0x90 [ 4223.822644] device_del+0x2e5/0x420 [ 4223.822644] pci_remove_bus_device+0x70/0x110 [ 4223.822644] pciehp_unconfigure_device+0x7c/0x130 [ 4223.822644] pciehp_disable_slot+0x6b/0x100 [ 4223.822645] pciehp_handle_presence_or_link_change+0xd8/0x320 [ 4223.822645] pciehp_ist+0x176/0x180 [ 4223.822645] ? irq_finalize_oneshot.part.50+0x110/0x110 [ 4223.822645] irq_thread_fn+0x19/0x50 [ 4223.822646] irq_thread+0x104/0x190 [ 4223.822646] ? irq_forced_thread_fn+0x90/0x90 [ 4223.822646] ? irq_thread_check_affinity+0xe0/0xe0 [ 4223.822646] kthread+0x114/0x130 [ 4223.822647] ? __kthread_cancel_work+0x40/0x40 [ 4223.822647] ret_from_fork+0x1f/0x30 [ 4223.822647] Kernel Offset: 0x6400000 from 0xffffffff81000000 (relocationrange: 0xffffffff80000000-0xffffffffbfffffff)
Fix it by checking the device's
error_stateindevtlb_invalidation_with_pasid()to avoid sending meaningless devTLB flush request to link down device that is set topci_channel_io_perm_failureand then powered off in
pciehp_ist()
pciehp_handle_presence_or_link_change()
pciehp_disable_slot()
remove_board()
pciehp_unconfigure_device()For
SAFE_REMOVALunplug, link is alive when iommu releases device and issues devTLB invalidate request, wouldn't trigger such issue.This patch works for all kinds of
SURPPRISE_REMOVALunplug operation.Tested-by Haorong Ye <[email protected]>Signed-off-by Ethan Zhao <[email protected]>--- drivers/iommu/intel/pasid.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)drivers/iommu/intel/pasid.c +10
-0@@ -476,6 +476,23 @@ devtlb_invalidation_with_pasid(struct intel_iommu *iommu, {struct device_domain_info *info;u16 sid, qdep, pfsid; +struct pci_dev *pdev; + + pdev =to_pci_dev (dev); +if (!pdev) +return ; + +/* +* If endpoint device's link was brough down by user's pci configuration +* access to it's hotplug capable slot link control register, as sequence +* response for DLLSC, pciehp_ist() will set the device error_state to
drivers/iommu/intel/pasid.c devtlb_invalidation_with_pasid(struct intel_iommu *iommu, · line 498
Quoted 10 lines
drivers/iommu/intel/pasid.c +7
-0+* pci_channel_io_perm_failure. Checking device's state here to avoid +* issuing meaningless devTLB flush request to it, that might cause lockup +* warning or deadlock because too long time waiting in interrupt context. +*/ + +if (pci_dev_is_disconnected (pdev)) +return ; info =dev_iommu_priv_get (dev);if (!info || !info->ats_enabled)
It's likely better to check the device status after verifying ats_enabled. How about below change?
drivers/iommu/intel/pasid.c +3 -0
@@ -481,6 +481,9 @@ devtlb_invalidation_with_pasid(struct intel_iommu *iommu,if (!info || !info->ats_enabled)return ; +if (pci_dev_is_disconnected (to_pci_dev (dev))) +return + sid = info->bus <<8 | info->devfn; qdep = info->ats_qdep; pfsid = info->pfsid;
Best regards,
baolu
Re: [PATCH v3 2/2] iommu/vt-d: don's issue devTLB flush request when device is disconnected
Quoted 183 lines · Baolu Lu
Quoted 165 lines · Ethan Zhao
For those endpoint devices connect to system via hotplug capable ports, users could request a warm reset to the device by flapping device's link through setting the slot's link control register, as
pciehpt_ist()DLLSC interrupt sequence response, pciehp will unload the device driver and then power it off. thus cause an IOMMU devTLB flush request for device to be sent and a long time completion/timeout waiting in interrupt context.That would cause following continuous hard lockup warning and system hang
[ 4211.433662] pcieport 0000:17:01.0: pciehp: Slot(108): Link Down [ 4211.433664] pcieport 0000:17:01.0: pciehp: Slot(108): Card not present [ 4223.822591] NMI watchdog: Watchdog detected hard LOCKUP on cpu 144 [ 4223.822622] CPU: 144 PID: 1422 Comm: irq/57-pciehp Kdump: loaded Tainted: G S OE kernel version xxxx [ 4223.822623] Hardware name: vendorname xxxx 666-106, BIOS 01.01.02.03.01 05/15/2023 [ 4223.822623] RIP: 0010:qi_submit_sync+0x2c0/0x490 [ 4223.822624] Code: 48 be 00 00 00 00 00 08 00 00 49 85 74 24 20 0f 95 c1 48 8b 57 10 83 c1 04 83 3c 1a 03 0f 84 a2 01 00 00 49 8b 04 24 8b 70 34 <40> f6 c6 1 0 74 17 49 8b 04 24 8b 80 80 00 00 00 89 c2 d3 fa 41 39 [ 4223.822624] RSP: 0018:ffffc4f074f0bbb8 EFLAGS: 00000093 [ 4223.822625] RAX: ffffc4f040059000 RBX: 0000000000000014 RCX: 0000000000000005 [ 4223.822625] RDX: ffff9f3841315800 RSI: 0000000000000000 RDI: ffff9f38401a8340 [ 4223.822625] RBP: ffff9f38401a8340 R08: ffffc4f074f0bc00 R09: 0000000000000000 [ 4223.822626] R10: 0000000000000010 R11: 0000000000000018 R12: ffff9f384005e200 [ 4223.822626] R13: 0000000000000004 R14: 0000000000000046 R15: 0000000000000004 [ 4223.822626] FS: 0000000000000000(0000) GS:ffffa237ae400000(0000) knlGS:0000000000000000 [ 4223.822627] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4223.822627] CR2: 00007ffe86515d80 CR3: 000002fd3000a001 CR4: 0000000000770ee0 [ 4223.822627] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4223.822628] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 4223.822628] PKRU: 55555554 [ 4223.822628] Call Trace: [ 4223.822628] qi_flush_dev_iotlb+0xb1/0xd0 [ 4223.822628] __dmar_remove_one_dev_info+0x224/0x250 [ 4223.822629] dmar_remove_one_dev_info+0x3e/0x50 [ 4223.822629] intel_iommu_release_device+0x1f/0x30 [ 4223.822629] iommu_release_device+0x33/0x60 [ 4223.822629] iommu_bus_notifier+0x7f/0x90 [ 4223.822630] blocking_notifier_call_chain+0x60/0x90 [ 4223.822630] device_del+0x2e5/0x420 [ 4223.822630] pci_remove_bus_device+0x70/0x110 [ 4223.822630] pciehp_unconfigure_device+0x7c/0x130 [ 4223.822631] pciehp_disable_slot+0x6b/0x100 [ 4223.822631] pciehp_handle_presence_or_link_change+0xd8/0x320 [ 4223.822631] pciehp_ist+0x176/0x180 [ 4223.822631] ? irq_finalize_oneshot.part.50+0x110/0x110 [ 4223.822632] irq_thread_fn+0x19/0x50 [ 4223.822632] irq_thread+0x104/0x190 [ 4223.822632] ? irq_forced_thread_fn+0x90/0x90 [ 4223.822632] ? irq_thread_check_affinity+0xe0/0xe0 [ 4223.822633] kthread+0x114/0x130 [ 4223.822633] ? __kthread_cancel_work+0x40/0x40 [ 4223.822633] ret_from_fork+0x1f/0x30 [ 4223.822633] Kernel panic - not syncing: Hard LOCKUP [ 4223.822634] CPU: 144 PID: 1422 Comm: irq/57-pciehp Kdump: loaded Tainted: G S OE kernel version xxxx [ 4223.822634] Hardware name: vendorname xxxx 666-106, BIOS 01.01.02.03.01 05/15/2023 [ 4223.822634] Call Trace: [ 4223.822634] <NMI> [ 4223.822635] dump_stack+0x6d/0x88 [ 4223.822635] panic+0x101/0x2d0 [ 4223.822635] ? ret_from_fork+0x11/0x30 [ 4223.822635] nmi_panic.cold.14+0xc/0xc [ 4223.822636] watchdog_overflow_callback.cold.8+0x6d/0x81 [ 4223.822636] __perf_event_overflow+0x4f/0xf0 [ 4223.822636] handle_pmi_common+0x1ef/0x290 [ 4223.822636] ? __set_pte_vaddr+0x28/0x40 [ 4223.822637] ? flush_tlb_one_kernel+0xa/0x20 [ 4223.822637] ? __native_set_fixmap+0x24/0x30 [ 4223.822637] ? ghes_copy_tofrom_phys+0x70/0x100 [ 4223.822637] ? __ghes_peek_estatus.isra.16+0x49/0xa0 [ 4223.822637] intel_pmu_handle_irq+0xba/0x2b0 [ 4223.822638] perf_event_nmi_handler+0x24/0x40 [ 4223.822638] nmi_handle+0x4d/0xf0 [ 4223.822638] default_do_nmi+0x49/0x100 [ 4223.822638] exc_nmi+0x134/0x180 [ 4223.822639] end_repeat_nmi+0x16/0x67 [ 4223.822639] RIP: 0010:qi_submit_sync+0x2c0/0x490 [ 4223.822639] Code: 48 be 00 00 00 00 00 08 00 00 49 85 74 24 20 0f 95 c1 48 8b 57 10 83 c1 04 83 3c 1a 03 0f 84 a2 01 00 00 49 8b 04 24 8b 70 34 <40> f6 c6 10 74 17 49 8b 04 24 8b 80 80 00 00 00 89 c2 d3 fa 41 39 [ 4223.822640] RSP: 0018:ffffc4f074f0bbb8 EFLAGS: 00000093 [ 4223.822640] RAX: ffffc4f040059000 RBX: 0000000000000014 RCX: 0000000000000005 [ 4223.822640] RDX: ffff9f3841315800 RSI: 0000000000000000 RDI: ffff9f38401a8340 [ 4223.822641] RBP: ffff9f38401a8340 R08: ffffc4f074f0bc00 R09: 0000000000000000 [ 4223.822641] R10: 0000000000000010 R11: 0000000000000018 R12: ffff9f384005e200 [ 4223.822641] R13: 0000000000000004 R14: 0000000000000046 R15: 0000000000000004 [ 4223.822641] ? qi_submit_sync+0x2c0/0x490 [ 4223.822642] ? qi_submit_sync+0x2c0/0x490 [ 4223.822642] </NMI> [ 4223.822642] qi_flush_dev_iotlb+0xb1/0xd0 [ 4223.822642] __dmar_remove_one_dev_info+0x224/0x250 [ 4223.822643] dmar_remove_one_dev_info+0x3e/0x50 [ 4223.822643] intel_iommu_release_device+0x1f/0x30 [ 4223.822643] iommu_release_device+0x33/0x60 [ 4223.822643] iommu_bus_notifier+0x7f/0x90 [ 4223.822644] blocking_notifier_call_chain+0x60/0x90 [ 4223.822644] device_del+0x2e5/0x420 [ 4223.822644] pci_remove_bus_device+0x70/0x110 [ 4223.822644] pciehp_unconfigure_device+0x7c/0x130 [ 4223.822644] pciehp_disable_slot+0x6b/0x100 [ 4223.822645] pciehp_handle_presence_or_link_change+0xd8/0x320 [ 4223.822645] pciehp_ist+0x176/0x180 [ 4223.822645] ? irq_finalize_oneshot.part.50+0x110/0x110 [ 4223.822645] irq_thread_fn+0x19/0x50 [ 4223.822646] irq_thread+0x104/0x190 [ 4223.822646] ? irq_forced_thread_fn+0x90/0x90 [ 4223.822646] ? irq_thread_check_affinity+0xe0/0xe0 [ 4223.822646] kthread+0x114/0x130 [ 4223.822647] ? __kthread_cancel_work+0x40/0x40 [ 4223.822647] ret_from_fork+0x1f/0x30 [ 4223.822647] Kernel Offset: 0x6400000 from 0xffffffff81000000 (relocationrange: 0xffffffff80000000-0xffffffffbfffffff)
Fix it by checking the device's
error_stateindevtlb_invalidation_with_pasid()to avoid sending meaningless devTLB flush request to link down device that is set topci_channel_io_perm_failureand then powered off in
pciehp_ist()
pciehp_handle_presence_or_link_change()
pciehp_disable_slot()
remove_board()
pciehp_unconfigure_device()For
SAFE_REMOVALunplug, link is alive when iommu releases device and issues devTLB invalidate request, wouldn't trigger such issue.This patch works for all kinds of
SURPPRISE_REMOVALunplug operation.Tested-by Haorong Ye <[email protected]>Signed-off-by Ethan Zhao <[email protected]>---
drivers/iommu/intel/pasid.c| 17 +++++++++++++++++1 file changed, 17 insertions(+)drivers/iommu/intel/pasid.c +8
-0@@ -476,6 +476,23 @@ devtlb_invalidation_with_pasid(struct intel_iommu *iommu, { struct device_domain_info *info; u16 sid, qdep, pfsid; + struct pci_dev *pdev; + + pdev = to_pci_dev(dev); + if (!pdev) + return; + + /* +* If endpoint device's link was brough down by user's pci configuration
+ * access to it's hotplug capable slot link control register, as sequence
+ * response for DLLSC,pciehp_ist()will set the deviceerror_stateto
+ *pci_channel_io_perm_failure. Checking device's state here to avoid
+ * issuing meaningless devTLB flush request to it, that might cause lockupQuoted 8 lines
+ * warning or deadlock because too long time waiting in interrupt context.
+ */
+
+ if (pci_dev_is_disconnected(pdev))
+ return;
info =dev_iommu_priv_get(dev);
if (!info || !info->ats_enabled)It's likely better to check the device status after verifying
ats_enabled. How about below change?drivers/iommu/intel/pasid.c +0
-0
drivers/iommu/intel/pasid.c devtlb_invalidation_with_pasid(struct intel_iommu · line 487
Quoted 7 lines
drivers/iommu/intel/pasid.c +3
-0@@ -481,6 +481,9 @@ devtlb_invalidation_with_pasid(struct intel_iommu *iommu, if (!info || !info->ats_enabled) return; + if (pci_dev_is_disconnected(to_pci_dev(dev))) + return +
I did this in the first version, but I thought seconds, changed it.
Anyway, not performance critical path, I am okay with them.
Thanks,
Ethan
Quoted 6 lines
drivers/iommu/intel/pasid.c +0
-0sid = info->bus <<8 | info->devfn; qdep = info->ats_qdep;pfsid =
info->pfsid;Best regards,
baolu
Re: [PATCH v3 2/2] iommu/vt-d: don's issue devTLB flush request when device is disconnected
In reply to Baolu LuQuoted 183 lines · Baolu Lu
Quoted 165 lines · Ethan Zhao
For those endpoint devices connect to system via hotplug capable ports, users could request a warm reset to the device by flapping device's link through setting the slot's link control register, as
pciehpt_ist()DLLSC interrupt sequence response, pciehp will unload the device driver and then power it off. thus cause an IOMMU devTLB flush request for device to be sent and a long time completion/timeout waiting in interrupt context.That would cause following continuous hard lockup warning and system hang
[ 4211.433662] pcieport 0000:17:01.0: pciehp: Slot(108): Link Down [ 4211.433664] pcieport 0000:17:01.0: pciehp: Slot(108): Card not present [ 4223.822591] NMI watchdog: Watchdog detected hard LOCKUP on cpu 144 [ 4223.822622] CPU: 144 PID: 1422 Comm: irq/57-pciehp Kdump: loaded Tainted: G S OE kernel version xxxx [ 4223.822623] Hardware name: vendorname xxxx 666-106, BIOS 01.01.02.03.01 05/15/2023 [ 4223.822623] RIP: 0010:qi_submit_sync+0x2c0/0x490 [ 4223.822624] Code: 48 be 00 00 00 00 00 08 00 00 49 85 74 24 20 0f 95 c1 48 8b 57 10 83 c1 04 83 3c 1a 03 0f 84 a2 01 00 00 49 8b 04 24 8b 70 34 <40> f6 c6 1 0 74 17 49 8b 04 24 8b 80 80 00 00 00 89 c2 d3 fa 41 39 [ 4223.822624] RSP: 0018:ffffc4f074f0bbb8 EFLAGS: 00000093 [ 4223.822625] RAX: ffffc4f040059000 RBX: 0000000000000014 RCX: 0000000000000005 [ 4223.822625] RDX: ffff9f3841315800 RSI: 0000000000000000 RDI: ffff9f38401a8340 [ 4223.822625] RBP: ffff9f38401a8340 R08: ffffc4f074f0bc00 R09: 0000000000000000 [ 4223.822626] R10: 0000000000000010 R11: 0000000000000018 R12: ffff9f384005e200 [ 4223.822626] R13: 0000000000000004 R14: 0000000000000046 R15: 0000000000000004 [ 4223.822626] FS: 0000000000000000(0000) GS:ffffa237ae400000(0000) knlGS:0000000000000000 [ 4223.822627] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4223.822627] CR2: 00007ffe86515d80 CR3: 000002fd3000a001 CR4: 0000000000770ee0 [ 4223.822627] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4223.822628] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 4223.822628] PKRU: 55555554 [ 4223.822628] Call Trace: [ 4223.822628] qi_flush_dev_iotlb+0xb1/0xd0 [ 4223.822628] __dmar_remove_one_dev_info+0x224/0x250 [ 4223.822629] dmar_remove_one_dev_info+0x3e/0x50 [ 4223.822629] intel_iommu_release_device+0x1f/0x30 [ 4223.822629] iommu_release_device+0x33/0x60 [ 4223.822629] iommu_bus_notifier+0x7f/0x90 [ 4223.822630] blocking_notifier_call_chain+0x60/0x90 [ 4223.822630] device_del+0x2e5/0x420 [ 4223.822630] pci_remove_bus_device+0x70/0x110 [ 4223.822630] pciehp_unconfigure_device+0x7c/0x130 [ 4223.822631] pciehp_disable_slot+0x6b/0x100 [ 4223.822631] pciehp_handle_presence_or_link_change+0xd8/0x320 [ 4223.822631] pciehp_ist+0x176/0x180 [ 4223.822631] ? irq_finalize_oneshot.part.50+0x110/0x110 [ 4223.822632] irq_thread_fn+0x19/0x50 [ 4223.822632] irq_thread+0x104/0x190 [ 4223.822632] ? irq_forced_thread_fn+0x90/0x90 [ 4223.822632] ? irq_thread_check_affinity+0xe0/0xe0 [ 4223.822633] kthread+0x114/0x130 [ 4223.822633] ? __kthread_cancel_work+0x40/0x40 [ 4223.822633] ret_from_fork+0x1f/0x30 [ 4223.822633] Kernel panic - not syncing: Hard LOCKUP [ 4223.822634] CPU: 144 PID: 1422 Comm: irq/57-pciehp Kdump: loaded Tainted: G S OE kernel version xxxx [ 4223.822634] Hardware name: vendorname xxxx 666-106, BIOS 01.01.02.03.01 05/15/2023 [ 4223.822634] Call Trace: [ 4223.822634] <NMI> [ 4223.822635] dump_stack+0x6d/0x88 [ 4223.822635] panic+0x101/0x2d0 [ 4223.822635] ? ret_from_fork+0x11/0x30 [ 4223.822635] nmi_panic.cold.14+0xc/0xc [ 4223.822636] watchdog_overflow_callback.cold.8+0x6d/0x81 [ 4223.822636] __perf_event_overflow+0x4f/0xf0 [ 4223.822636] handle_pmi_common+0x1ef/0x290 [ 4223.822636] ? __set_pte_vaddr+0x28/0x40 [ 4223.822637] ? flush_tlb_one_kernel+0xa/0x20 [ 4223.822637] ? __native_set_fixmap+0x24/0x30 [ 4223.822637] ? ghes_copy_tofrom_phys+0x70/0x100 [ 4223.822637] ? __ghes_peek_estatus.isra.16+0x49/0xa0 [ 4223.822637] intel_pmu_handle_irq+0xba/0x2b0 [ 4223.822638] perf_event_nmi_handler+0x24/0x40 [ 4223.822638] nmi_handle+0x4d/0xf0 [ 4223.822638] default_do_nmi+0x49/0x100 [ 4223.822638] exc_nmi+0x134/0x180 [ 4223.822639] end_repeat_nmi+0x16/0x67 [ 4223.822639] RIP: 0010:qi_submit_sync+0x2c0/0x490 [ 4223.822639] Code: 48 be 00 00 00 00 00 08 00 00 49 85 74 24 20 0f 95 c1 48 8b 57 10 83 c1 04 83 3c 1a 03 0f 84 a2 01 00 00 49 8b 04 24 8b 70 34 <40> f6 c6 10 74 17 49 8b 04 24 8b 80 80 00 00 00 89 c2 d3 fa 41 39 [ 4223.822640] RSP: 0018:ffffc4f074f0bbb8 EFLAGS: 00000093 [ 4223.822640] RAX: ffffc4f040059000 RBX: 0000000000000014 RCX: 0000000000000005 [ 4223.822640] RDX: ffff9f3841315800 RSI: 0000000000000000 RDI: ffff9f38401a8340 [ 4223.822641] RBP: ffff9f38401a8340 R08: ffffc4f074f0bc00 R09: 0000000000000000 [ 4223.822641] R10: 0000000000000010 R11: 0000000000000018 R12: ffff9f384005e200 [ 4223.822641] R13: 0000000000000004 R14: 0000000000000046 R15: 0000000000000004 [ 4223.822641] ? qi_submit_sync+0x2c0/0x490 [ 4223.822642] ? qi_submit_sync+0x2c0/0x490 [ 4223.822642] </NMI> [ 4223.822642] qi_flush_dev_iotlb+0xb1/0xd0 [ 4223.822642] __dmar_remove_one_dev_info+0x224/0x250 [ 4223.822643] dmar_remove_one_dev_info+0x3e/0x50 [ 4223.822643] intel_iommu_release_device+0x1f/0x30 [ 4223.822643] iommu_release_device+0x33/0x60 [ 4223.822643] iommu_bus_notifier+0x7f/0x90 [ 4223.822644] blocking_notifier_call_chain+0x60/0x90 [ 4223.822644] device_del+0x2e5/0x420 [ 4223.822644] pci_remove_bus_device+0x70/0x110 [ 4223.822644] pciehp_unconfigure_device+0x7c/0x130 [ 4223.822644] pciehp_disable_slot+0x6b/0x100 [ 4223.822645] pciehp_handle_presence_or_link_change+0xd8/0x320 [ 4223.822645] pciehp_ist+0x176/0x180 [ 4223.822645] ? irq_finalize_oneshot.part.50+0x110/0x110 [ 4223.822645] irq_thread_fn+0x19/0x50 [ 4223.822646] irq_thread+0x104/0x190 [ 4223.822646] ? irq_forced_thread_fn+0x90/0x90 [ 4223.822646] ? irq_thread_check_affinity+0xe0/0xe0 [ 4223.822646] kthread+0x114/0x130 [ 4223.822647] ? __kthread_cancel_work+0x40/0x40 [ 4223.822647] ret_from_fork+0x1f/0x30 [ 4223.822647] Kernel Offset: 0x6400000 from 0xffffffff81000000 (relocationrange: 0xffffffff80000000-0xffffffffbfffffff)
Fix it by checking the device's
error_stateindevtlb_invalidation_with_pasid()to avoid sending meaningless devTLB flush request to link down device that is set topci_channel_io_perm_failureand then powered off in
pciehp_ist()
pciehp_handle_presence_or_link_change()
pciehp_disable_slot()
remove_board()
pciehp_unconfigure_device()For
SAFE_REMOVALunplug, link is alive when iommu releases device and issues devTLB invalidate request, wouldn't trigger such issue.This patch works for all kinds of
SURPPRISE_REMOVALunplug operation.Tested-by Haorong Ye <[email protected]>Signed-off-by Ethan Zhao <[email protected]>---
drivers/iommu/intel/pasid.c| 17 +++++++++++++++++1 file changed, 17 insertions(+)drivers/iommu/intel/pasid.c +8
-0@@ -476,6 +476,23 @@ devtlb_invalidation_with_pasid(struct intel_iommu *iommu, { struct device_domain_info *info; u16 sid, qdep, pfsid; + struct pci_dev *pdev; + + pdev = to_pci_dev(dev); + if (!pdev) + return; + + /* +* If endpoint device's link was brough down by user's pci configuration
+ * access to it's hotplug capable slot link control register, as sequence
+ * response for DLLSC,pciehp_ist()will set the deviceerror_stateto
+ *pci_channel_io_perm_failure. Checking device's state here to avoid
+ * issuing meaningless devTLB flush request to it, that might cause lockupQuoted 8 lines
+ * warning or deadlock because too long time waiting in interrupt context.
+ */
+
+ if (pci_dev_is_disconnected(pdev))
+ return;
info =dev_iommu_priv_get(dev);
if (!info || !info->ats_enabled)It's likely better to check the device status after verifying
ats_enabled. How about below change?drivers/iommu/intel/pasid.c +0
-0
drivers/iommu/intel/pasid.c devtlb_invalidation_with_pasid(struct intel_iommu · line 485
Quoted 5 lines
drivers/iommu/intel/pasid.c +1
-0@@ -481,6 +481,9 @@ devtlb_invalidation_with_pasid(struct intel_iommu *iommu, if (!info || !info->ats_enabled) return; + if (pci_dev_is_disconnected(to_pci_dev(dev)))
I like this kind of simplicity, but rationalist always brings me back to the no-error(ugly)
style. :)
Thanks,
Ethan
Quoted 9 lines
drivers/iommu/intel/pasid.c +2
-0+return + sid = info->bus << 8 | info->devfn; qdep = info->ats_qdep;pfsid =
info->pfsid;Best regards,
baolu
Baolu Lu
maintainerRe: [PATCH v3 2/2] iommu/vt-d: don's issue devTLB flush request when device is disconnected
Quoted 47 lines · Ethan Zhao
Quoted 47 lines
Quoted 26 lines
drivers/iommu/intel/pasid.c +8
-0@@ -476,6 +476,23 @@ devtlb_invalidation_with_pasid(struct intel_iommu *iommu, { struct device_domain_info *info; u16 sid, qdep, pfsid; + struct pci_dev *pdev; + + pdev = to_pci_dev(dev); + if (!pdev) + return; + + /* +* If endpoint device's link was brough down by user's pci configuration
+ * access to it's hotplug capable slot link control register, as sequence
+ * response for DLLSC,pciehp_ist()will set the deviceerror_stateto
+ *pci_channel_io_perm_failure. Checking device's state here to avoid
+ * issuing meaningless devTLB flush request to it, that might cause lockupQuoted 8 lines
+ * warning or deadlock because too long time waiting in interrupt context.
+ */
+
+ if (pci_dev_is_disconnected(pdev))
+ return;
info =dev_iommu_priv_get(dev);
if (!info || !info->ats_enabled)It's likely better to check the device status after verifying
ats_enabled. How about below change?drivers/iommu/intel/pasid.c +0
-0@@ -481,6 +481,9 @@ devtlb_invalidation_with_pasid(struct intel_iommu *iommu, if (!info || !info->ats_enabled) return;
Quoted 5 lines
drivers/iommu/intel/pasid.c devtlb_invalidation_with_pasid(struct intel_iommu *iommu, · line 484
Quoted 1 line
drivers/iommu/intel/pasid.c +1
-0+ if (pci_dev_is_disconnected(to_pci_dev(dev)))I like this kind of simplicity, but rationalist always brings me back to the no-error(ugly)
style. 🙂
The rational is that Intel IOMMU driver only supports PCI ATS. So if device is marked as ATS supported, then it must be a PCI device. Therefore, it's safe to convert it to pci_device with to_pci_dev().
If you move this up before ATS checking, then you need to check dev_is_pci().
Best regards,
baolu
Re: [PATCH v3 2/2] iommu/vt-d: don's issue devTLB flush request when device is disconnected
Quoted 52 lines · Baolu Lu
Quoted 51 lines · Ethan Zhao
Quoted 43 lines
Quoted 26 lines
drivers/iommu/intel/pasid.c +8
-0@@ -476,6 +476,23 @@ devtlb_invalidation_with_pasid(struct intel_iommu *iommu, { struct device_domain_info *info; u16 sid, qdep, pfsid; + struct pci_dev *pdev; + + pdev = to_pci_dev(dev); + if (!pdev) + return; + + /* +* If endpoint device's link was brough down by user's pci configuration
+ * access to it's hotplug capable slot link control register, as sequence
+ * response for DLLSC,pciehp_ist()will set the deviceerror_stateto
+ *pci_channel_io_perm_failure. Checking device's state here to avoid
+ * issuing meaningless devTLB flush request to it, that might cause lockupQuoted 8 lines
+ * warning or deadlock because too long time waiting in interrupt context.
+ */
+
+ if (pci_dev_is_disconnected(pdev))
+ return;
info =dev_iommu_priv_get(dev);
if (!info || !info->ats_enabled)It's likely better to check the device status after verifying
ats_enabled. How about below change?drivers/iommu/intel/pasid.c +0
-0drivers/iommu/intel/pasid.c devtlb_invalidation_with_pasid(struct · line 485
Quoted 5 lines
drivers/iommu/intel/pasid.c +1
-0@@ -481,6 +481,9 @@ devtlb_invalidation_with_pasid(struct intel_iommu *iommu, if (!info || !info->ats_enabled) return; + if (pci_dev_is_disconnected(to_pci_dev(dev)))I like this kind of simplicity, but rationalist always brings me back to the no-error(ugly)
Quoted 5 lines
Quoted 1 line
style. 🙂
The rational is that Intel IOMMU driver only supports PCI ATS. So if device is marked as ATS supported, then it must be a PCI device. Therefore, it's safe to convert it to
pci_devicewithto_pci_dev().
Fair engough !
Thanks,
Ethan
Quoted 7 lines
If you move this up before ATS checking, then you need to check
dev_is_pci().Best regards,
baolu
Re: [PATCH v3 2/2] iommu/vt-d: don's issue devTLB flush request when device is disconnected
Baolu,
Quoted 54 lines · Ethan Zhao
Quoted 52 lines · Baolu Lu
Quoted 51 lines · Ethan Zhao
Quoted 43 lines
Quoted 26 lines
drivers/iommu/intel/pasid.c +8
-0@@ -476,6 +476,23 @@ devtlb_invalidation_with_pasid(struct intel_iommu *iommu, { struct device_domain_info *info; u16 sid, qdep, pfsid; + struct pci_dev *pdev; + + pdev = to_pci_dev(dev); + if (!pdev) + return; + + /* +* If endpoint device's link was brough down by user's pci configuration
+ * access to it's hotplug capable slot link control register, as sequence
+ * response for DLLSC,pciehp_ist()will set the deviceerror_stateto
+ *pci_channel_io_perm_failure. Checking device's state here to avoid
+ * issuing meaningless devTLB flush request to it, that might cause lockupQuoted 8 lines
+ * warning or deadlock because too long time waiting in interrupt context.
+ */
+
+ if (pci_dev_is_disconnected(pdev))
+ return;
info =dev_iommu_priv_get(dev);
if (!info || !info->ats_enabled)It's likely better to check the device status after verifying
ats_enabled. How about below change?drivers/iommu/intel/pasid.c +0
-0drivers/iommu/intel/pasid.c devtlb_invalidation_with_pasid(struct · line 485
Quoted 5 lines
drivers/iommu/intel/pasid.c +1
-0@@ -481,6 +481,9 @@ devtlb_invalidation_with_pasid(struct intel_iommu *iommu, if (!info || !info->ats_enabled) return; + if (pci_dev_is_disconnected(to_pci_dev(dev)))I like this kind of simplicity, but rationalist always brings me back to the no-error(ugly)
Quoted 9 lines
Quoted 5 lines
Quoted 1 line
style. 🙂
The rational is that Intel IOMMU driver only supports PCI ATS. So if device is marked as ATS supported, then it must be a PCI device. Therefore, it's safe to convert it to
pci_devicewithto_pci_dev().Fair engough !
May I use your reviewed-by sign in next version after that ?
Thanks,
Ethan
Quoted 12 lines
Thanks,
Ethan
Quoted 7 lines
If you move this up before ATS checking, then you need to check
dev_is_pci().Best regards,
baolu
Baolu Lu
maintainerRe: [PATCH v3 2/2] iommu/vt-d: don's issue devTLB flush request when device is disconnected
Quoted 59 lines · Ethan Zhao
Baolu,
Quoted 56 lines · Ethan Zhao
Quoted 54 lines · Baolu Lu
Quoted 52 lines · Ethan Zhao
Quoted 43 lines
Quoted 26 lines
drivers/iommu/intel/pasid.c +8
-0@@ -476,6 +476,23 @@ devtlb_invalidation_with_pasid(struct intel_iommu *iommu, { struct device_domain_info *info; u16 sid, qdep, pfsid; + struct pci_dev *pdev; + + pdev = to_pci_dev(dev); + if (!pdev) + return; + + /* +* If endpoint device's link was brough down by user's pci configuration
+ * access to it's hotplug capable slot link control register, as sequence
+ * response for DLLSC,pciehp_ist()will set the deviceerror_stateto
+ *pci_channel_io_perm_failure. Checking device's state here to avoid
+ * issuing meaningless devTLB flush request to it, that might cause lockupQuoted 8 lines
+ * warning or deadlock because too long time waiting in interrupt context.
+ */
+
+ if (pci_dev_is_disconnected(pdev))
+ return;
info =dev_iommu_priv_get(dev);
if (!info || !info->ats_enabled)It's likely better to check the device status after verifying
ats_enabled. How about below change?drivers/iommu/intel/pasid.c +0
-0drivers/iommu/intel/pasid.c devtlb_invalidation_with_pasid(struct · line 485
Quoted 5 lines
drivers/iommu/intel/pasid.c +1
-0@@ -481,6 +481,9 @@ devtlb_invalidation_with_pasid(struct intel_iommu *iommu, if (!info || !info->ats_enabled) return; + if (pci_dev_is_disconnected(to_pci_dev(dev)))I like this kind of simplicity, but rationalist always brings me back to the no-error(ugly)
style. 🙂
Quoted 8 lines
Quoted 7 lines
Quoted 3 lines
The rational is that Intel IOMMU driver only supports PCI ATS. So if device is marked as ATS supported, then it must be a PCI device. Therefore, it's safe to convert it to
pci_devicewithto_pci_dev().Fair engough !
May I use your reviewed-by sign in next version after that ?
I am not sure about the changes in the PCI subsystem. Since the code here calls the new interface from that subsystem, I need acked-by on that change before proceeding.
Best regards,
baolu
Re: [PATCH v3 2/2] iommu/vt-d: don's issue devTLB flush request when device is disconnected
Quoted 64 lines · Baolu Lu
Quoted 63 lines · Ethan Zhao
Baolu,
Quoted 60 lines · Ethan Zhao
Quoted 57 lines · Baolu Lu
Quoted 47 lines · Ethan Zhao
Quoted 47 lines
Quoted 26 lines
drivers/iommu/intel/pasid.c +8
-0@@ -476,6 +476,23 @@ devtlb_invalidation_with_pasid(struct intel_iommu *iommu, { struct device_domain_info *info; u16 sid, qdep, pfsid; + struct pci_dev *pdev; + + pdev = to_pci_dev(dev); + if (!pdev) + return; + + /* +* If endpoint device's link was brough down by user's pci configuration
+ * access to it's hotplug capable slot link control register, as sequence
+ * response for DLLSC,pciehp_ist()will set the deviceerror_stateto
+ *pci_channel_io_perm_failure. Checking device's state here to avoid
+ * issuing meaningless devTLB flush request to it, that might cause lockupQuoted 8 lines
+ * warning or deadlock because too long time waiting in interrupt context.
+ */
+
+ if (pci_dev_is_disconnected(pdev))
+ return;
info =dev_iommu_priv_get(dev);
if (!info || !info->ats_enabled)It's likely better to check the device status after verifying
ats_enabled. How about below change?drivers/iommu/intel/pasid.c +0
-0@@ -481,6 +481,9 @@ devtlb_invalidation_with_pasid(struct intel_iommu *iommu, if (!info || !info->ats_enabled) return;Quoted 5 lines
drivers/iommu/intel/pasid.c devtlb_invalidation_with_pasid(struct intel_iommu *iommu, · line 484
Quoted 1 line
drivers/iommu/intel/pasid.c +1
-0+ if (pci_dev_is_disconnected(to_pci_dev(dev)))I like this kind of simplicity, but rationalist always brings me back to the no-error(ugly)
style. 🙂
The rational is that Intel IOMMU driver only supports PCI ATS. So if device is marked as ATS supported, then it must be a PCI device. Therefore, it's safe to convert it to
pci_devicewithto_pci_dev().
Quoted 6 lines
Quoted 4 lines
Quoted 3 lines
Fair engough !
May I use your reviewed-by sign in next version after that ?
I am not sure about the changes in the PCI subsystem. Since the code
IC
Thanks,
Ethan
Quoted 5 lines
here calls the new interface from that subsystem, I need acked-by on that change before proceeding.
Best regards,
baolu