sbp1: Add support for IBM SBP1 board
Subsystems (2)
PATCH 1/1 sbp1: Add support for IBM SBP1 board
From: Patrick Rudolph <[email protected]>
Add defconfig & devicetree for IBM SBP1 board BMC based on AST2600 SoC.
---
Changes:
- Update MAINTAINERS
--- arch/arm/dts/Makefile | 4 +- arch/arm/dts/ast2600-sbp1.dts | 96 ++++++++++++++++++++ board/aspeed/evb_ast2600/MAINTAINERS | 1 + configs/ibm-sbp1_defconfig | 126 +++++++++++++++++++++++++++ 4 files changed, 226 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/ast2600-sbp1.dts create mode 100644 configs/ibm-sbp1_defconfig
arch/arm/dts/Makefile +3 -1
@@ -1353,7 +1353,9 @@ dtb-$(CONFIG_BCM6878) += \ bcm96878.dtb dtb-$(CONFIG_ASPEED_AST2500) += ast2500-evb.dtb -dtb-$(CONFIG_ASPEED_AST2600) += ast2600-evb.dtb +dtb-$(CONFIG_ASPEED_AST2600) += \ + ast2600-evb.dtb \ + ast2600-sbp1.dtb dtb-$(CONFIG_ARCH_STI) += stih410-b2260.dtb
arch/arm/dts/ast2600-sbp1.dts new file +96 -0
96 lines not on this page · raw message
board/aspeed/evb_ast2600/MAINTAINERS +1 -0
@@ -4,3 +4,4 @@ S: Maintained F: board/aspeed/evb_ast2600/ F: include/configs/evb_ast2600.h F: configs/evb-ast2600_defconfig +F: configs/ibm-sbp1_defconfig
configs/ibm-sbp1_defconfig new file +126 -0
126 lines not on this page · raw message
Signature · 1 line
2.41.0
Quoted 10 lines · Naresh Solanki
From: Patrick Rudolph <[email protected]>
Add defconfig & devicetree for IBM SBP1 board BMC based on AST2600 SoC.
Signed-off-by Patrick Rudolph <[email protected]>Signed-off-by Naresh Solanki <[email protected]>---
Changes:
- UpdateMAINTAINERS
Quoted 8 lines
--- arch/arm/dts/Makefile | 4 +- arch/arm/dts/ast2600-sbp1.dts | 96 ++++++++++++++++++++ board/aspeed/evb_ast2600/MAINTAINERS | 1 + configs/ibm-sbp1_defconfig | 126 +++++++++++++++++++++++++++ 4 files changed, 226 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/ast2600-sbp1.dts create mode 100644 configs/ibm-sbp1_defconfig
Is this device tree submitted upstream?
Signature · 1 line
Tom
Hi Tom
Quoted 21 lines · Tom Rini
Quoted 10 lines · Naresh Solanki
From: Patrick Rudolph <[email protected]>
Add defconfig & devicetree for IBM SBP1 board BMC based on AST2600 SoC.
Signed-off-by Patrick Rudolph <[email protected]>Signed-off-by Naresh Solanki <[email protected]>---
Changes:
- UpdateMAINTAINERSQuoted 8 lines
--- arch/arm/dts/Makefile | 4 +- arch/arm/dts/ast2600-sbp1.dts | 96 ++++++++++++++++++++ board/aspeed/evb_ast2600/MAINTAINERS | 1 + configs/ibm-sbp1_defconfig | 126 +++++++++++++++++++++++++++ 4 files changed, 226 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/ast2600-sbp1.dts create mode 100644 configs/ibm-sbp1_defconfig
Quoted 1 line
Is this device tree submitted upstream?
This devicetree is meant for uboot.
devicetree for linux kernel is wip.
Regards,
Naresh
Quoted 3 lines
--
Tom
Quoted 24 lines · Naresh Solanki
Hi Tom
Quoted 21 lines · Tom Rini
Quoted 18 lines · Naresh Solanki
From: Patrick Rudolph <[email protected]>
Add defconfig & devicetree for IBM SBP1 board BMC based on AST2600 SoC.
Signed-off-by Patrick Rudolph <[email protected]>Signed-off-by Naresh Solanki <[email protected]>---
Changes:
- UpdateMAINTAINERS--- arch/arm/dts/Makefile | 4 +- arch/arm/dts/ast2600-sbp1.dts | 96 ++++++++++++++++++++ board/aspeed/evb_ast2600/MAINTAINERS | 1 + configs/ibm-sbp1_defconfig | 126 +++++++++++++++++++++++++++ 4 files changed, 226 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/ast2600-sbp1.dts create mode 100644 configs/ibm-sbp1_defconfig
Quoted 3 lines
Quoted 1 line
Is this device tree submitted upstream?
This devicetree is meant for uboot.
devicetree for linux kernel is wip.
Right, but the DTs in U-Boot are intended to be re-synced with the kernel and medium to long term the goal should be that the run-time DT U-Boot has is passed to the OS.
Signature · 1 line
Tom
Hi Tom,
can you please clarify or point us to some documentation that explains the new DT setup?
I thought the u-boot DT is only used for u-boot internal drivers.
Do we need to upstream the kernel DT first?
Do we need to provide a complete "kernel DT" to u-boot as well?
Regards,
Patrick Rudolph
Quoted 36 lines · Tom Rini
Quoted 24 lines · Naresh Solanki
Hi Tom
Quoted 21 lines · Tom Rini
Quoted 18 lines · Naresh Solanki
From: Patrick Rudolph <[email protected]>
Add defconfig & devicetree for IBM SBP1 board BMC based on AST2600 SoC.
Signed-off-by Patrick Rudolph <[email protected]>Signed-off-by Naresh Solanki <[email protected]>---
Changes:
- UpdateMAINTAINERS--- arch/arm/dts/Makefile | 4 +- arch/arm/dts/ast2600-sbp1.dts | 96 ++++++++++++++++++++ board/aspeed/evb_ast2600/MAINTAINERS | 1 + configs/ibm-sbp1_defconfig | 126 +++++++++++++++++++++++++++ 4 files changed, 226 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/ast2600-sbp1.dts create mode 100644 configs/ibm-sbp1_defconfigQuoted 3 lines
Quoted 1 line
Is this device tree submitted upstream?
This devicetree is meant for uboot.
devicetree for linux kernel is wip.Right, but the DTs in U-Boot are intended to be re-synced with the kernel and medium to long term the goal should be that the run-time DT U-Boot has is passed to the OS.
--
Tom
Quoted 4 lines · Patrick Rudolph
Hi Tom,
can you please clarify or point us to some documentation that explains the new DT setup?
I thought the u-boot DT is only used for u-boot internal drivers.
The DT has always supposed to have been the same one as the Linux Kernel, to make things easier for developers as they would only need one DT, not two. For systems that use the EFI loader we pass the same DT to the OS which can simplify life.
Quoted 1 line
Do we need to upstream the kernel DT first?
If the DT is not upstream it really should be being submitted upstream and not just never upstreamed. I know this is more challenging in some cases than others.
Quoted 1 line
Do we need to provide a complete "kernel DT" to u-boot as well?
That is usually easiest, yes.
Signature · 1 line
Tom