Skip to contentSkip to conversation

ALSA: hda: cs35l41: Add HP override

PATCH In review Lorenz Brun 2 participants 2 messages Dec 23, 2023 – Dec 29, 2023 Sound

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 ALSA: hda: cs35l41: Add HP override

This adds an override for a series of notebooks using a common config taken from HP's proprietary Windows driver.

This has been tested on a HP 15-ey0xxxx device (subsystem 103C8A31) together with another Realtek quirk and the calibration files from the proprietary driver.

---
Changes in v2:
- Use newly-introduced config table instead of function
- Change boost cap value from 10uF to 24uF after cross-referencing my sources with the preexisting 103C89C6 entry.

Just noticed that yesterday I sent out another copy of v1 instead of v2, sorry about that.

 sound/pci/hda/cs35l41_hda_property.c | 46 ++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)
sound/pci/hda/cs35l41_hda_property.c +46 -0
index c9eb70290973..c65b106ff1ab 100644
@@ -42,6 +42,30 @@ static const struct cs35l41_config cs35l41_config_table[] = {
  * in the ACPI. The Reset GPIO is also valid, so we can use the Reset defined in _DSD.
  */
 	{ "103C89C6", SPI, 2, INTERNAL, { CS35L41_RIGHT, CS35L41_LEFT, 0, 0 }, -1, -1, -1, 1000, 4500, 24 },
+
+	{ "103C8A28", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+	{ "103C8A29", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+	{ "103C8A2A", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+	{ "103C8A2B", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+	{ "103C8A2C", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+	{ "103C8A2D", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+	{ "103C8A2E", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+	{ "103C8A30", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+	{ "103C8A31", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+	{ "103C8BB3", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+	{ "103C8BB4", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+	{ "103C8BDF", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+	{ "103C8BE0", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+	{ "103C8BE1", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+	{ "103C8BE2", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+	{ "103C8BE9", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+	{ "103C8BDD", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+	{ "103C8BDE", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+	{ "103C8BE3", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+	{ "103C8BE5", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+	{ "103C8BE6", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+	{ "103C8B3A", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4100, 24 },
+
 	{ "104312AF", SPI, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
 	{ "10431433", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
 	{ "10431463", I2C, 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
@@ -374,6 +398,28 @@ static const struct cs35l41_prop_model cs35l41_prop_model_table[] = {
 	{ "CSC3551", "10431F12", generic_dsd_config },
 	{ "CSC3551", "10431F1F", generic_dsd_config },
 	{ "CSC3551", "10431F62", generic_dsd_config },
+	{ "CSC3551", "103C8A28", generic_dsd_config },
+	{ "CSC3551", "103C8A29", generic_dsd_config },
+	{ "CSC3551", "103C8A2A", generic_dsd_config },
+	{ "CSC3551", "103C8A2B", generic_dsd_config },
+	{ "CSC3551", "103C8A2C", generic_dsd_config },
+	{ "CSC3551", "103C8A2D", generic_dsd_config },
+	{ "CSC3551", "103C8A2E", generic_dsd_config },
+	{ "CSC3551", "103C8A30", generic_dsd_config },
+	{ "CSC3551", "103C8A31", generic_dsd_config },
+	{ "CSC3551", "103C8BB3", generic_dsd_config },
+	{ "CSC3551", "103C8BB4", generic_dsd_config },
+	{ "CSC3551", "103C8BDF", generic_dsd_config },
+	{ "CSC3551", "103C8BE0", generic_dsd_config },
+	{ "CSC3551", "103C8BE1", generic_dsd_config },
+	{ "CSC3551", "103C8BE2", generic_dsd_config },
+	{ "CSC3551", "103C8BE9", generic_dsd_config },
+	{ "CSC3551", "103C8BDD", generic_dsd_config },
+	{ "CSC3551", "103C8BDE", generic_dsd_config },
+	{ "CSC3551", "103C8BE3", generic_dsd_config },
+	{ "CSC3551", "103C8BE5", generic_dsd_config },
+	{ "CSC3551", "103C8BE6", generic_dsd_config },
+	{ "CSC3551", "103C8B3A", generic_dsd_config },
 	{}
 };
 
Signature · 1 line
2.42.0
#1 lore raw
Quoted 8 lines · Lorenz Brun

This adds an override for a series of notebooks using a common config taken from HP's proprietary Windows driver.

This has been tested on a HP 15-ey0xxxx device (subsystem 103C8A31) together with another Realtek quirk and the calibration files from the proprietary driver.

Quoted 6 lines

---
Changes in v2:
- Use newly-introduced config table instead of function
- Change boost cap value from 10uF to 24uF after cross-referencing my sources with the preexisting 103C89C6 entry.

This doesn't apply cleanly any longer after the merge of the latest series from Stefan, unfortunately. Could you rebase on either for-next or topic/cs35l41 branch of sound.git tree and resubmit?

Also, the prop_model_table[] is a sorted list. Please add entries at the right positions.

thanks,

Takashi