Add Variscite VAR-SOM-MX93 support
Subsystems (2)
v4 cover Add Variscite VAR-SOM-MX93 support
Hey,
This is a v4 adding support for the Variscite VAR-SOM-MX93 SoM on Symphony Board.
Thanks,
---
Changes in v4:
- Add ethernet0 alias
- Remove useless properties
Changes in v3:
- Fix indentation on a continuation line
- Remove useless nodes and include
Changes in v2:
- Remove "nxp,pca9451a" block
- Fixed checkpatch warnings
- Fixed dtb_checks warnings
- Introduce dt-bindings documentation
v3: https://lore.kernel.org/linux-devicetree/[email protected]/T/#t
Mathieu Othacehe (2):
dt-bindings: arm: fsl: Add VAR-SOM-MX93 with Symphony
arm64: dts: imx93-var-som: Add Variscite VAR-SOM-MX93
.../devicetree/bindings/arm/fsl.yaml | 6 + arch/arm64/boot/dts/freescale/Makefile | 1 + .../dts/freescale/imx93-var-som-symphony.dts | 303 ++++++++++++++++++ .../boot/dts/freescale/imx93-var-som.dtsi | 111 +++++++ 4 files changed, 421 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts create mode 100644 arch/arm64/boot/dts/freescale/imx93-var-som.dtsi
Signature · 1 line
2.41.0
PATCH v4 1/2 dt-bindings: arm: fsl: Add VAR-SOM-MX93 with Symphony
Add support for Variscite i.MX93 VAR-SOM-MX93 SoM with Symphony board.
--- Documentation/devicetree/bindings/arm/fsl.yaml | 6 ++++++ 1 file changed, 6 insertions(+)
Documentation/devicetree/bindings/arm/fsl.yaml +6 -0
@@ -1275,6 +1275,12 @@ properties: - const: tq,imx93-tqma9352 # TQ-Systems GmbH i.MX93 TQMa93xxCA/LA SOM - const: fsl,imx93 + - description: Variscite VAR-SOM-MX93 based boards + items: + - const: variscite,var-som-mx93-symphony + - const: variscite,var-som-mx93 + - const: fsl,imx93 + - description: Freescale Vybrid Platform Device Tree Bindings
Signature · 1 line
2.41.0
PATCH v4 2/2 arm64: dts: imx93-var-som: Add Variscite VAR-SOM-MX93
In reply to Mathieu OthaceheAdd DTSI for Variscite VAR-SOM-MX93 System on Module and DTS for Variscite VAR-SOM-MX93 on Symphony evaluation board.
This version comes with:
- NXP i.MX 93 Dual, 1.7GHz, Cortex-A55 + Cortex-M33
- 2 GB of RAM
- 16GB eMMC
- 802.11ax/ac/a/b/g/n WiFi with 5.3 Bluetooth
- CAN bus
- Audio codec
--- arch/arm64/boot/dts/freescale/Makefile | 1 + .../dts/freescale/imx93-var-som-symphony.dts | 303 ++++++++++++++++++ .../boot/dts/freescale/imx93-var-som.dtsi | 111 +++++++ 3 files changed, 415 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts create mode 100644 arch/arm64/boot/dts/freescale/imx93-var-som.dtsi
arch/arm64/boot/dts/freescale/Makefile +1 -0
@@ -203,6 +203,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb +dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony.dtb imx8mm-venice-gw72xx-0x-imx219-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo imx8mm-venice-gw72xx-0x-rpidsi-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rpidsi.dtbo
arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts new file +303 -0
303 lines not on this page · raw message
arch/arm64/boot/dts/freescale/imx93-var-som.dtsi new file +111 -0
111 lines not on this page · raw message
Signature · 1 line
2.41.0
Re: [PATCH v4 2/2] arm64: dts: imx93-var-som: Add Variscite VAR-SOM-MX93
Hi Mathieu,
Am 27.12.23 um 18:09 schrieb Mathieu Othacehe:
Quoted 306 lines
Add DTSI for Variscite VAR-SOM-MX93 System on Module and DTS for Variscite VAR-SOM-MX93 on Symphony evaluation board.
This version comes with:
- NXP i.MX 93 Dual, 1.7GHz, Cortex-A55 + Cortex-M33
- 2 GB of RAM
- 16GB eMMC
- 802.11ax/ac/a/b/g/n WiFi with 5.3 Bluetooth
- CAN bus
- Audio codecReviewed-by Fabio Estevam <[email protected]>Reviewed-by Krzysztof Kozlowski <[email protected]>Signed-off-by Mathieu Othacehe <[email protected]>--- arch/arm64/boot/dts/freescale/Makefile | 1 + .../dts/freescale/imx93-var-som-symphony.dts | 303 ++++++++++++++++++ .../boot/dts/freescale/imx93-var-som.dtsi | 111 +++++++ 3 files changed, 415 insertions(+)create mode 100644
arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dtscreate mode 100644arch/arm64/boot/dts/freescale/imx93-var-som.dtsiarch/arm64/boot/dts/freescale/Makefile +1
-0@@ -203,6 +203,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb +dtb-$(CONFIG_ARCH_MXC) += imx93-var-som-symphony.dtb imx8mm-venice-gw72xx-0x-imx219-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo imx8mm-venice-gw72xx-0x-rpidsi-dtbs := imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rpidsi.dtboarch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts new file +266
-0@@ -0,0 +1,303 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright 2021 NXP + * Copyright 2023 Variscite Ltd. + */ + +/dts-v1/; + +#include "imx93-var-som.dtsi" + +/{ + model = "Variscite VAR-SOM-MX93 on Symphony evaluation board"; + compatible = "variscite,var-som-mx93-symphony", + "variscite,var-som-mx93", "fsl,imx93"; + + aliases { + ethernet0 = &eqos; + ethernet1 = &fec; + }; + + chosen { + stdout-path = &lpuart1; + }; + + /* + * Needed only for Symphony <= v1.5 + */ + reg_fec_phy: regulator-fec-phy { + compatible = "regulator-fixed"; + regulator-name = "fec-phy"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-enable-ramp-delay = <20000>; + gpio = <&pca9534 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_usdhc2_vmmc: regulator-usdhc2 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>; + regulator-name = "VSD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 18 GPIO_ACTIVE_HIGH>; + off-on-delay-us = <20000>; + enable-active-high; + }; + + reg_vref_1v8: regulator-adc-vref { + compatible = "regulator-fixed"; + regulator-name = "vref_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ethosu_mem: ethosu-region@88000000 { + compatible = "shared-dma-pool"; + reusable; + reg = <0x0 0x88000000 0x0 0x8000000>; + }; + + vdev0vring0: vdev0vring0@87ee0000 { + reg = <0 0x87ee0000 0 0x8000>; + no-map; + }; + + vdev0vring1: vdev0vring1@87ee8000 { + reg = <0 0x87ee8000 0 0x8000>; + no-map; + }; + + vdev1vring0: vdev1vring0@87ef0000 { + reg = <0 0x87ef0000 0 0x8000>; + no-map; + }; + + vdev1vring1: vdev1vring1@87ef8000 { + reg = <0 0x87ef8000 0 0x8000>; + no-map; + }; + + rsc_table: rsc-table@2021f000 { + reg = <0 0x2021f000 0 0x1000>; + no-map; + }; + + vdevbuffer: vdevbuffer@87f00000 { + compatible = "shared-dma-pool"; + reg = <0 0x87f00000 0 0x100000>; + no-map; + }; + + ele_reserved: ele-reserved@87de0000 { + compatible = "shared-dma-pool"; + reg = <0 0x87de0000 0 0x100000>; + no-map; + }; + }; +}; + +/* Use external instead of internal RTC*/ +&bbnsm_rtc { + status = "disabled"; +}; + +&eqos { + mdio { + ethphy1: ethernet-phy@5 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <5>; + qca,disable-smarteee; + eee-broken-1000t; + reset-gpios = <&pca9534 5 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <20000>; + vddio-supply = <&vddio1>; + + vddio1: vddio-regulator { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + phy-mode = "rgmii"; + phy-handle = <ðphy1>; + phy-supply = <®_fec_phy>; + status = "okay"; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&iomuxc { + pinctrl_fec: fecgrp { + fsl,pins = < + MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0 0x57e + MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1 0x57e + MX93_PAD_ENET2_RD2__ENET1_RGMII_RD2 0x57e + MX93_PAD_ENET2_RD3__ENET1_RGMII_RD3 0x57e + MX93_PAD_ENET2_RXC__ENET1_RGMII_RXC 0x5fe + MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL 0x57e + MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0 0x57e + MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1 0x57e + MX93_PAD_ENET2_TD2__ENET1_RGMII_TD2 0x57e + MX93_PAD_ENET2_TD3__ENET1_RGMII_TD3 0x57e + MX93_PAD_ENET2_TXC__ENET1_RGMII_TXC 0x5fe + MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL 0x57e + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX93_PAD_PDM_CLK__CAN1_TX 0x139e + MX93_PAD_PDM_BIT_STREAM0__CAN1_RX 0x139e + >; + }; + + pinctrl_lpi2c1: lpi2c1grp { + fsl,pins = < + MX93_PAD_I2C1_SCL__LPI2C1_SCL 0x40000b9e + MX93_PAD_I2C1_SDA__LPI2C1_SDA 0x40000b9e + >; + }; + + pinctrl_lpi2c1_gpio: lpi2c1gpiogrp { + fsl,pins = < + MX93_PAD_I2C1_SCL__GPIO1_IO00 0x31e + MX93_PAD_I2C1_SDA__GPIO1_IO01 0x31e + >; + }; + + pinctrl_lpi2c5: lpi2c5grp { + fsl,pins = < + MX93_PAD_GPIO_IO23__LPI2C5_SCL 0x40000b9e + MX93_PAD_GPIO_IO22__LPI2C5_SDA 0x40000b9e + >; + }; + + pinctrl_lpi2c5_gpio: lpi2c5gpiogrp { + fsl,pins = < + MX93_PAD_GPIO_IO23__GPIO2_IO23 0x31e + MX93_PAD_GPIO_IO22__GPIO2_IO22 0x31e + >; + }; + + pinctrl_pca9534: pca9534grp { + fsl,pins = < + MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x31e + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX93_PAD_UART1_RXD__LPUART1_RX 0x31e + MX93_PAD_UART1_TXD__LPUART1_TX 0x31e + >; + }; + + pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp { + fsl,pins = < + MX93_PAD_GPIO_IO18__GPIO2_IO18 0x31e + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX93_PAD_SD2_CLK__USDHC2_CLK 0x15fe + MX93_PAD_SD2_CMD__USDHC2_CMD 0x13fe + MX93_PAD_SD2_DATA0__USDHC2_DATA0 0x13fe + MX93_PAD_SD2_DATA1__USDHC2_DATA1 0x13fe + MX93_PAD_SD2_DATA2__USDHC2_DATA2 0x13fe + MX93_PAD_SD2_DATA3__USDHC2_DATA3 0x13fe + MX93_PAD_SD2_VSELECT__USDHC2_VSELECT 0x51e + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + MX93_PAD_SD2_CD_B__GPIO3_IO00 0x31e + >; + }; +}; + +&lpi2c1 { + clock-frequency = <400000>; + pinctrl-names = "default", "sleep", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c1>; + pinctrl-1 = <&pinctrl_lpi2c1_gpio>; + pinctrl-2 = <&pinctrl_lpi2c1_gpio>; + scl-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; + status = "okay"; + + /* DS1337 RTC module */ + rtc@68 { + compatible = "dallas,ds1337"; + reg = <0x68>; + }; +}; + +&lpi2c5 { + clock-frequency = <400000>; + pinctrl-names = "default", "sleep", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c5>; + pinctrl-1 = <&pinctrl_lpi2c5_gpio>; + pinctrl-2 = <&pinctrl_lpi2c5_gpio>; + scl-gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; + status = "okay"; + + pca9534: gpio@20 {
arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts line 276
Quoted 10 lines
arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts new file +10
-0+ compatible = "nxp,pca9534"; + reg = <0x20>; + gpio-controller; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pca9534>; + interrupt-parent = <&gpio3>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + #gpio-cells = <2>; + wakeup-source; + };
there are neither gpio-line-names defined for this GPIO expander nor the SOC. Are there no GPIOs which can be accessed from userspace?
Best regards
Re: [PATCH v4 2/2] arm64: dts: imx93-var-som: Add Variscite VAR-SOM-MX93
Hello Stefan,
Quoted 2 lines
there are neither gpio-line-names defined for this GPIO expander nor the SOC. Are there no GPIOs which can be accessed from userspace?
The carrier board schematic is here:
https://www.variscite.com/wp-content/uploads/2023/01/symphony-board_VAR-SOM-MX93.pdf
All the pin headers are mapped to specific functions. On the other, already mainlined device-trees, that are based on the same "Symphony" carrier board, there are however gpio-keys for three buttons:
gpio-keys {
compatible = "gpio-keys";
key-back {
label = "Back";
gpios = <&pca9534 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_BACK>;
};
key-home {
label = "Home";
gpios = <&pca9534 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
};
key-menu {
label = "Menu";
gpios = <&pca9534 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_MENU>;
};
};I can add that in v5.
Thanks,
Mathieu
Re: [PATCH v4 2/2] arm64: dts: imx93-var-som: Add Variscite VAR-SOM-MX93
Hi Mathieu,
Am 29.12.23 um 14:00 schrieb Mathieu Othacehe:
Quoted 6 lines
Hello Stefan,
Quoted 2 lines
there are neither gpio-line-names defined for this GPIO expander nor the SOC. Are there no GPIOs which can be accessed from userspace?
The carrier board schematic is here:
https://www.variscite.com/wp-content/uploads/2023/01/symphony-board_VAR-SOM-MX93.pdf
Thanks this helps.
Quoted 28 lines
All the pin headers are mapped to specific functions. On the other, already mainlined device-trees, that are based on the same "Symphony" carrier board, there are however gpio-keys for three buttons:
gpio-keys { compatible = "gpio-keys"; key-back { label = "Back"; gpios = <&pca9534 1 GPIO_ACTIVE_LOW>; linux,code = <KEY_BACK>; }; key-home { label = "Home"; gpios = <&pca9534 2 GPIO_ACTIVE_LOW>; linux,code = <KEY_HOME>; }; key-menu { label = "Menu"; gpios = <&pca9534 3 GPIO_ACTIVE_LOW>; linux,code = <KEY_MENU>; }; };
Quoted 1 line
I can add that in v5.
yes please.
I also saw in the other Symphony DTS a LED for heartbeat. Is it usable, too?
According to the datasheet the SOM expose 7 UARTs, but only the debug UART is enable. What is the reason for this?
Btw the commit log mentions a Wifi (via SDIO?) and audio interface. This is currently not supported by Linux?
Thanks
Quoted 4 lines
Thanks,
Mathieu
Re: [PATCH v4 2/2] arm64: dts: imx93-var-som: Add Variscite VAR-SOM-MX93
Hey,
Quoted 1 line
I also saw in the other Symphony DTS a LED for heartbeat. Is it usable, too?
Yes, I will add it to in v5.
Quoted 2 lines
According to the datasheet the SOM expose 7 UARTs, but only the debug UART is enable. What is the reason for this?
So those 7 UARTs are:
UART1: console
UART2: used by the microphone
UART3: used by the resistive touch
UART4: used by the ethernet/resistive touch
UART5: on J18.4,6,8,10 (used by BT)
UART6: on J18.7 and J18.9 (available)
UART7: on J18.3 and J18.5 (used by the M33 firmware)
I will enable UART6, and add a mention about UART7, something like:
/* J18.7, J18.9 */
&lpuart6 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart6>;
status = "okay";
};/* J18.3, J18.5 - used by M33 firmware */
&lpuart7 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart7>;
status = "disabled";
};Quoted 2 lines
Btw the commit log mentions a Wifi (via SDIO?) and audio interface. This is currently not supported by Linux?
I am not sure about that, and I would prefer to study that a bit later on if that's OK :) I can remove it from the commit log as this is misleading as not already supported / tested.
Thanks,
Mathieu
Re: [PATCH v4 2/2] arm64: dts: imx93-var-som: Add Variscite VAR-SOM-MX93
Hi,
Am 29.12.23 um 17:48 schrieb Mathieu Othacehe:
Quoted 26 lines
Hey,
Quoted 1 line
I also saw in the other Symphony DTS a LED for heartbeat. Is it usable, too?
Yes, I will add it to in v5.
Quoted 2 lines
According to the datasheet the SOM expose 7 UARTs, but only the debug UART is enable. What is the reason for this?
So those 7 UARTs are:
UART1: console
UART2: used by the microphone
UART3: used by the resistive touch
UART4: used by the ethernet/resistive touch
UART5: on J18.4,6,8,10 (used by BT)
UART6: on J18.7 and J18.9 (available)
UART7: on J18.3 and J18.5 (used by the M33 firmware)I will enable UART6, and add a mention about UART7, something like:
/* J18.7, J18.9 */
&lpuart6 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart6>; status = "okay"; };
Quoted 6 lines
/* J18.3, J18.5 - used by M33 firmware */
&lpuart7 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart7>; status = "disabled"; };
in case this is used by the M33 firmware, this applies to all i.MX93 so we don't need this. Just enable UART6 and keep UART7.
Quoted 5 lines
Quoted 2 lines
Btw the commit log mentions a Wifi (via SDIO?) and audio interface. This is currently not supported by Linux?
I am not sure about that, and I would prefer to study that a bit later on if that's OK :) I can remove it from the commit log as this is misleading as not already supported / tested.
This sounds good. No need to have it all at first.
Quoted 9 lines
Thanks,
Mathieu
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel