lspci: Adding TDISP, IDE
Subsystems (2)
cover lspci: Adding TDISP, IDE
Here is a couple of patches for TDISP/IDE capable PCIe devices. IDE enables PCIe link encryption and TDISP enables secure pass-through of PCI devices into confidentional virtual machines running under Linux KVM on supported hardware.
This is based on sha1
a997ef1 Martin Mares "Rename aux fields in structs pci_access and pci_dev to backend_data".
Please comment. Thanks.
ps. vim was set up as:
set expandtab
set tabstop=2
set shiftwidth=2
set cinoptions=:0,l1,t0,g0,(2,{2,>4
which hopefully works here :)
Alexey Kardashevskiy (2):
lspci: Add TEE-IO extended capability bit
pciutils: Add decode support for IDE Extended Capability
lib/header.h | 62 ++++++++ ls-caps.c | 1 + ls-ecaps.c | 162 ++++++++++++++++++++ 3 files changed, 225 insertions(+)
Signature · 1 line
2.41.0
PATCH 1/2 lspci: Add TEE-IO extended capability bit
PCIe r6.1 defines "TEE-IO Supported" in the PCI Express Device Capabilities Register which indicates that the Function implements the TEE-IO functionality as described by the TEE Device Interface Security Protocol (TDISP).
--- lib/header.h | 1 + ls-caps.c | 1 + 2 files changed, 2 insertions(+)
lib/header.h +1 -0
@@ -776,6 +776,7 @@#define PCI_EXP_DEVCAP_PWR_VAL 0x3fc0000/* Slot Power Limit Value */ #define PCI_EXP_DEVCAP_PWR_SCL 0xc000000/* Slot Power Limit Scale */ #define PCI_EXP_DEVCAP_FLRESET 0x10000000/* Function-Level Reset */ +#define PCI_EXP_DEVCAP_TEE_IO 0x40000000/* TEE-IO Supported (TDISP) */ #define PCI_EXP_DEVCTL 0x8/* Device Control */ #define PCI_EXP_DEVCTL_CERE 0x0001/* Correctable Error Reporting En. */ #define PCI_EXP_DEVCTL_NFERE 0x0002/* Non-Fatal Error Reporting Enable */
ls-caps.c +1 -0
@@ -717,6 +717,7 @@ static void cap_express_dev(struct device *d, int where, int type)printf (" SlotPowerLimit " );show_power_limit ((t &PCI_EXP_DEVCAP_PWR_VAL ) >>18 , (t &PCI_EXP_DEVCAP_PWR_SCL ) >>26 ); } +printf (" TEE-IO%c" ,FLAG (t,PCI_EXP_DEVCAP_TEE_IO ));printf ("\n" ); w =get_conf_word (d, where +PCI_EXP_DEVCTL );
Signature · 1 line
2.41.0
PATCH 2/2 pciutils: Add decode support for IDE Extended Capability
In reply to Alexey KardashevskiyIDE (Integrity & Data Encryption) Extended Capability defined in [1] implements control of the PCI link encryption.
The example output is:
Capabilities: [830 v1] IDE
IDECap: Lnk=1 Sel=1 FlowThru- PartHdr- Aggr- PCPC- IDE_KM+
IDECtl: IntEn-
LinkIDE#0 Ctl: En- NPR- PR- CPL- PCRC- HdrEnc=no Alg='AES-GCM 256 key size, 96b MAC' TC0 ID0 LinkIDE#0 Sta: Status=secure RecvChkFail-
SelectiveIDE#0 Ctl: En- NPR- PR- CPL- PCRC- HdrEnc=no Alg='AES-GCM 256 key size, 96b MAC' TC0 ID0 SelectiveIDE#0 Sta: insecure RecvChkFail-
SelectiveIDE#0 RID: Valid- Base=0 Limit=0 SegBase=0
[1] PCIe r6.0.1, sections 6.33, 7.9.26
--- lib/header.h | 61 ++++++++ ls-ecaps.c | 162 ++++++++++++++++++++ 2 files changed, 223 insertions(+)
lib/header.h +61 -0
@@ -256,6 +256,7 @@#define PCI_EXT_CAP_ID_NPEM 0x29/* Native PCIe Enclosure Management */ #define PCI_EXT_CAP_ID_32GT 0x2a/* Physical Layer 32.0 GT/s */ #define PCI_EXT_CAP_ID_DOE 0x2e/* Data Object Exchange */ +#define PCI_EXT_CAP_ID_IDE 0x30/* IDE */ /*** Definitions of capabilities ***/
@@ -1416,6 +1417,66 @@#define PCI_DOE_STS_ERROR 0x4/* DOE Error */ #define PCI_DOE_STS_OBJECT_READY 0x80000000/* Data Object Ready */ +/* IDE Extended Capability */ +#define PCI_IDE_CAP 0x4 +#define PCI_IDE_CAP_LINK_IDE_SUPP 0x1/* Link IDE Stream Supported */ +#define PCI_IDE_CAP_SELECTIVE_IDE_SUPP 0x2/* Selective IDE Streams Supported */ +#define PCI_IDE_CAP_FLOWTHROUGH_IDE_SUPP 0x4/* Flow-Through IDE Stream Supported */ +#define PCI_IDE_CAP_PARTIAL_HEADER_ENC_SUPP 0x8/* Partial Header Encryption Supported */ +#define PCI_IDE_CAP_AGGREGATION_SUPP 0x10/* Aggregation Supported */ +#define PCI_IDE_CAP_PCRC_SUPP 0x20/* PCRC Supported */ +#define PCI_IDE_CAP_IDE_KM_SUPP 0x40/* IDE_KM Protocol Supported */ +#define PCI_IDE_CAP_ALG (x) (((x) >> 8) & 0x1f)/* Supported Algorithms */ +#define PCI_IDE_CAP_ALG_AES_GCM_256 0/* AES-GCM 256 key size, 96b MAC */ +#define PCI_IDE_CAP_LINK_TC_NUM (x) (((x) >> 13) & 0x7)/* Number of TCs Supported for Link IDE */ +#define PCI_IDE_CAP_SELECTIVE_STREAMS_NUM (x) (((x) >> 16) & 0xff)/* Number of Selective IDE Streams Supported */ +#define PCI_IDE_CTL 0x8 +#define PCI_IDE_CTL_FLOWTHROUGH_IDE 0x4/* Flow-Through IDE Stream Enabled */ +#define PCI_IDE_LINK_STREAM 0xC +/* Link IDE Stream block, up to PCI_IDE_CAP_LINK_TC_NUM */ +/* Link IDE Stream Control Register */ +#define PCI_IDE_LINK_CTL_EN 0x1/* Link IDE Stream Enable */ +#define PCI_IDE_LINK_CTL_TX_AGGR_NPR (x)(((x) >> 2) & 0x3)/* Tx Aggregation Mode NPR */ +#define PCI_IDE_LINK_CTL_TX_AGGR_PR (x) (((x) >> 4) & 0x3)/* Tx Aggregation Mode PR */ +#define PCI_IDE_LINK_CTL_TX_AGGR_CPL (x)(((x) >> 6) & 0x3)/* Tx Aggregation Mode CPL */ +#define PCI_IDE_LINK_CTL_PCRC_EN 0x100/* PCRC Enable */ +#define PCI_IDE_LINK_CTL_PART_ENC (x) (((x) >> 10) & 0xf)/* Partial Header Encryption Mode */ +#define PCI_IDE_LINK_CTL_ALG (x) (((x) >> 14) & 0x1f)/* Selected Algorithm */ +#define PCI_IDE_LINK_CTL_TC (x) (((x) >> 19) & 0x7)/* Traffic Class */ +#define PCI_IDE_LINK_CTL_ID (x) (((x) >> 24) & 0xff)/* Stream ID */ +/* Link IDE Stream Status Register */ +#define PCI_IDE_LINK_STS_STATUS (x) ((x) & 0xf)/* Link IDE Stream State */ +#define PCI_IDE_LINK_STS_RECVD_INTEGRITY_CHECK 0x80000000/* Received Integrity Check Fail Message */ +/* Selective IDE Stream block, up to PCI_IDE_CAP_SELECTIVE_STREAMS_NUM */ +/* Selective IDE Stream Capability Register */ +#define PCI_IDE_SEL_CAP_BLOCKS_NUM (x) ((x) & 0xf)/* Number of Address Association Register Blocks */ +/* Selective IDE Stream Control Register */ +#define PCI_IDE_SEL_CTL_EN 0x1/* Selective IDE Stream Enable */ +#define PCI_IDE_SEL_CTL_TX_AGGR_NPR (x) (((x) >> 2) & 0x3)/* Tx Aggregation Mode NPR */ +#define PCI_IDE_SEL_CTL_TX_AGGR_PR (x) (((x) >> 4) & 0x3)/* Tx Aggregation Mode PR */ +#define PCI_IDE_SEL_CTL_TX_AGGR_CPL (x) (((x) >> 6) & 0x3)/* Tx Aggregation Mode CPL */ +#define PCI_IDE_SEL_CTL_PCRC_EN 0x100/* PCRC Enable */ +#define PCI_IDE_SEL_CTL_PART_ENC (x) (((x) >> 10) & 0xf)/* Partial Header Encryption Mode */ +#define PCI_IDE_SEL_CTL_ALG (x) (((x) >> 14) & 0x1f)/* Selected Algorithm */ +#define PCI_IDE_SEL_CTL_TC (x) (((x) >> 19) & 0x7)/* Traffic Class */ +#define PCI_IDE_SEL_CTL_DEFAULT 0x400000/* Default Stream */ +#define PCI_IDE_SEL_CTL_ID (x) (((x) >> 24) & 0xff)/* Stream ID */ +/* Selective IDE Stream Status Register */ +#define PCI_IDE_SEL_STS_STATUS (x) ((x) & 0xf)/* Selective IDE Stream State */ +#define PCI_IDE_SEL_STS_RECVD_INTEGRITY_CHECK 0x80000000/* Received Integrity Check Fail Message */ +/* IDE RID Association Register 1 */ +#define PCI_IDE_SEL_RID_1_LIMIT (x) (((x) >> 8) & 0xffff)/* RID Limit */ +/* IDE RID Association Register 2 */ +#define PCI_IDE_SEL_RID_2_VALID 0x1/* Valid */ +#define PCI_IDE_SEL_RID_2_BASE (x) (((x) >> 8) & 0xffff)/* RID Base */ +#define PCI_IDE_SEL_RID_2_SEG_BASE (x) (((x) >> 24) & 0xff)/* Segmeng Base */ +/* Selective IDE Address Association Register Block, up to PCI_IDE_SEL_CAP_BLOCKS_NUM */ +#define PCI_IDE_SEL_ADDR_1_VALID 0x1/* Valid */ +#define PCI_IDE_SEL_ADDR_1_BASE_LOW (x) (((x) >> 8) & 0xfff)/* Memory Base Lower */ +#define PCI_IDE_SEL_ADDR_1_LIMIT_LOW (x)(((x) >> 20) & 0xfff)/* Memory Limit Lower */ +/* IDE Address Association Register 2 is "Memory Limit Upper" */ +/* IDE Address Association Register 3 is "Memory Base Upper" */ +/* * The PCI interface treats multi-function devices as independent * devices. The slot/function address of each device is encoded
ls-ecaps.c +162 -0
174 lines not on this page · raw message
Signature · 1 line
2.41.0
Re: [PATCH pciutils 2/2] pciutils: Add decode support for IDE Extended Capability
Quoted 5 lines · Alexey Kardashevskiy
IDE (Integrity & Data Encryption) Extended Capability defined in [1] implements control of the PCI link encryption.
The example output is:
Quoted 8 lines
Capabilities: [830 v1] IDE
IDECap: Lnk=1 Sel=1 FlowThru- PartHdr- Aggr- PCPC- IDE_KM+
IDECtl: IntEn-
LinkIDE#0 Ctl: En- NPR- PR- CPL- PCRC- HdrEnc=no Alg='AES-GCM 256 key size, 96b MAC' TC0 ID0 LinkIDE#0 Sta: Status=secure RecvChkFail-
SelectiveIDE#0 Ctl: En- NPR- PR- CPL- PCRC- HdrEnc=no Alg='AES-GCM 256 key size, 96b MAC' TC0 ID0 SelectiveIDE#0 Sta: insecure RecvChkFail-
SelectiveIDE#0 RID: Valid- Base=0 Limit=0 SegBase=0
Ping? Suspiciously quiet :)
This is also missing:
setpci.c +1 -0
@@ -396,6 +396,7 @@ static const struct reg_name pci_reg_names[] = { { 0x20027, 0, 0, 0x0, "ECAP_LMR" }, { 0x20028, 0, 0, 0x0, "ECAP_HIER_ID" }, { 0x20029, 0, 0, 0x0, "ECAP_NPEM" }, + { 0x20030, 0, 0, 0x0, "ECAP_IDE" },
Which reminded me - one thing I want to do with setpci is changing the "En-"s above to "En+". At the moment setpci.c seems only allowing offsets into a ecapability which is tricky to use as offsets of "LinkIDE#NN Ctl" and "SelectiveIDE#NN Ctl" are not fixed - these are variable length arrays.
So, I could
1) teach setpci do parsing (repeat what s-ecaps.c does) to allow register names, like "setpci CAP_IDE+LinkIDE#4Ctl", something like this.
2) dump offsets as ([24] in this example and use offsets with setpci which it can do now):
LinkIDE#0 Ctl [24]: En- NPR- PR- CPL- PCRC- HdrEnc=no Alg='AES-GCM 256 key size, 96b MAC' TC0 ID0
3) leave lspci/setpci alone and do it elsewhere.
Any advice? Thanks,
Quoted 268 lines
[1] PCIe r6.0.1, sections 6.33, 7.9.26
Signed-off-by Alexey Kardashevskiy <[email protected]>--- lib/header.h | 61 ++++++++ ls-ecaps.c | 162 ++++++++++++++++++++ 2 files changed, 223 insertions(+)lib/header.h +61
-0@@ -256,6 +256,7 @@#define PCI_EXT_CAP_ID_NPEM 0x29/* Native PCIe Enclosure Management */ #define PCI_EXT_CAP_ID_32GT 0x2a/* Physical Layer 32.0 GT/s */ #define PCI_EXT_CAP_ID_DOE 0x2e/* Data Object Exchange */ +#define PCI_EXT_CAP_ID_IDE 0x30/* IDE */ /*** Definitions of capabilities ***/ @@ -1416,6 +1417,66 @@#define PCI_DOE_STS_ERROR 0x4/* DOE Error */ #define PCI_DOE_STS_OBJECT_READY 0x80000000/* Data Object Ready */ +/* IDE Extended Capability */ +#define PCI_IDE_CAP 0x4 +#define PCI_IDE_CAP_LINK_IDE_SUPP 0x1/* Link IDE Stream Supported */ +#define PCI_IDE_CAP_SELECTIVE_IDE_SUPP 0x2/* Selective IDE Streams Supported */ +#define PCI_IDE_CAP_FLOWTHROUGH_IDE_SUPP 0x4/* Flow-Through IDE Stream Supported */ +#define PCI_IDE_CAP_PARTIAL_HEADER_ENC_SUPP 0x8/* Partial Header Encryption Supported */ +#define PCI_IDE_CAP_AGGREGATION_SUPP 0x10/* Aggregation Supported */ +#define PCI_IDE_CAP_PCRC_SUPP 0x20/* PCRC Supported */ +#define PCI_IDE_CAP_IDE_KM_SUPP 0x40/* IDE_KM Protocol Supported */ +#define PCI_IDE_CAP_ALG (x) (((x) >> 8) & 0x1f)/* Supported Algorithms */ +#define PCI_IDE_CAP_ALG_AES_GCM_256 0/* AES-GCM 256 key size, 96b MAC */ +#define PCI_IDE_CAP_LINK_TC_NUM (x) (((x) >> 13) & 0x7)/* Number of TCs Supported for Link IDE */ +#define PCI_IDE_CAP_SELECTIVE_STREAMS_NUM (x) (((x) >> 16) & 0xff)/* Number of Selective IDE Streams Supported */ +#define PCI_IDE_CTL 0x8 +#define PCI_IDE_CTL_FLOWTHROUGH_IDE 0x4/* Flow-Through IDE Stream Enabled */ +#define PCI_IDE_LINK_STREAM 0xC +/* Link IDE Stream block, up to PCI_IDE_CAP_LINK_TC_NUM */ +/* Link IDE Stream Control Register */ +#define PCI_IDE_LINK_CTL_EN 0x1/* Link IDE Stream Enable */ +#define PCI_IDE_LINK_CTL_TX_AGGR_NPR (x)(((x) >> 2) & 0x3)/* Tx Aggregation Mode NPR */ +#define PCI_IDE_LINK_CTL_TX_AGGR_PR (x) (((x) >> 4) & 0x3)/* Tx Aggregation Mode PR */ +#define PCI_IDE_LINK_CTL_TX_AGGR_CPL (x)(((x) >> 6) & 0x3)/* Tx Aggregation Mode CPL */ +#define PCI_IDE_LINK_CTL_PCRC_EN 0x100/* PCRC Enable */ +#define PCI_IDE_LINK_CTL_PART_ENC (x) (((x) >> 10) & 0xf)/* Partial Header Encryption Mode */ +#define PCI_IDE_LINK_CTL_ALG (x) (((x) >> 14) & 0x1f)/* Selected Algorithm */ +#define PCI_IDE_LINK_CTL_TC (x) (((x) >> 19) & 0x7)/* Traffic Class */ +#define PCI_IDE_LINK_CTL_ID (x) (((x) >> 24) & 0xff)/* Stream ID */ +/* Link IDE Stream Status Register */ +#define PCI_IDE_LINK_STS_STATUS (x) ((x) & 0xf)/* Link IDE Stream State */ +#define PCI_IDE_LINK_STS_RECVD_INTEGRITY_CHECK 0x80000000/* Received Integrity Check Fail Message */ +/* Selective IDE Stream block, up to PCI_IDE_CAP_SELECTIVE_STREAMS_NUM */ +/* Selective IDE Stream Capability Register */ +#define PCI_IDE_SEL_CAP_BLOCKS_NUM (x) ((x) & 0xf)/* Number of Address Association Register Blocks */ +/* Selective IDE Stream Control Register */ +#define PCI_IDE_SEL_CTL_EN 0x1/* Selective IDE Stream Enable */ +#define PCI_IDE_SEL_CTL_TX_AGGR_NPR (x) (((x) >> 2) & 0x3)/* Tx Aggregation Mode NPR */ +#define PCI_IDE_SEL_CTL_TX_AGGR_PR (x) (((x) >> 4) & 0x3)/* Tx Aggregation Mode PR */ +#define PCI_IDE_SEL_CTL_TX_AGGR_CPL (x) (((x) >> 6) & 0x3)/* Tx Aggregation Mode CPL */ +#define PCI_IDE_SEL_CTL_PCRC_EN 0x100/* PCRC Enable */ +#define PCI_IDE_SEL_CTL_PART_ENC (x) (((x) >> 10) & 0xf)/* Partial Header Encryption Mode */ +#define PCI_IDE_SEL_CTL_ALG (x) (((x) >> 14) & 0x1f)/* Selected Algorithm */ +#define PCI_IDE_SEL_CTL_TC (x) (((x) >> 19) & 0x7)/* Traffic Class */ +#define PCI_IDE_SEL_CTL_DEFAULT 0x400000/* Default Stream */ +#define PCI_IDE_SEL_CTL_ID (x) (((x) >> 24) & 0xff)/* Stream ID */ +/* Selective IDE Stream Status Register */ +#define PCI_IDE_SEL_STS_STATUS (x) ((x) & 0xf)/* Selective IDE Stream State */ +#define PCI_IDE_SEL_STS_RECVD_INTEGRITY_CHECK 0x80000000/* Received Integrity Check Fail Message */ +/* IDE RID Association Register 1 */ +#define PCI_IDE_SEL_RID_1_LIMIT (x) (((x) >> 8) & 0xffff)/* RID Limit */ +/* IDE RID Association Register 2 */ +#define PCI_IDE_SEL_RID_2_VALID 0x1/* Valid */ +#define PCI_IDE_SEL_RID_2_BASE (x) (((x) >> 8) & 0xffff)/* RID Base */ +#define PCI_IDE_SEL_RID_2_SEG_BASE (x) (((x) >> 24) & 0xff)/* Segmeng Base */ +/* Selective IDE Address Association Register Block, up to PCI_IDE_SEL_CAP_BLOCKS_NUM */ +#define PCI_IDE_SEL_ADDR_1_VALID 0x1/* Valid */ +#define PCI_IDE_SEL_ADDR_1_BASE_LOW (x) (((x) >> 8) & 0xfff)/* Memory Base Lower */ +#define PCI_IDE_SEL_ADDR_1_LIMIT_LOW (x)(((x) >> 20) & 0xfff)/* Memory Limit Lower */ +/* IDE Address Association Register 2 is "Memory Limit Upper" */ +/* IDE Address Association Register 3 is "Memory Base Upper" */ +/* * The PCI interface treats multi-function devices as independent * devices. The slot/function address of each device is encoded ls-ecaps.c +162
-0@@ -1468,6 +1468,165 @@ cap_doe(struct device *d, int where) FLAG(l, PCI_DOE_STS_OBJECT_READY)); } +static void +cap_ide (struct device *d,int where) +{ +const char *hdr_enc_mode[] = {"no" ,"17:2" ,"25:2" ,"33:2" ,"41:2" }; +const char *algo[] = {"AES-GCM 256 key size, 96b MAC" }; +const char *stream_state[] = {"insecure" ,"secure" }; +const char *aggr[] = {"-" ,"=2" ,"=4" ,"=8" }; +u32 l, l2, linknum =0 , selnum =0 , addrnum, off, i, j; +char buf1[16 ], buf2[16 ]; + +printf ("IDE\n" ); + +if (verbose <2 ) +return ; + +if (!config_fetch (d, where +PCI_IDE_CAP ,8 )) + { +printf ("\t\t<unreadable>\n" ); +return ; + } + + l =get_conf_long (d, where +PCI_IDE_CAP ); +if (l &PCI_IDE_CAP_LINK_IDE_SUPP ) + linknum =PCI_IDE_CAP_LINK_TC_NUM (l) +1 ; +if (l &PCI_IDE_CAP_SELECTIVE_IDE_SUPP ) + selnum =PCI_IDE_CAP_SELECTIVE_STREAMS_NUM (l) +1 ; + +printf ("\t\tIDECap: Lnk=%d Sel=%d FlowThru%c PartHdr%c Aggr%c PCPC%c IDE_KM%c\n" , + linknum, + selnum, +FLAG (l,PCI_IDE_CAP_FLOWTHROUGH_IDE_SUPP ), +FLAG (l,PCI_IDE_CAP_PARTIAL_HEADER_ENC_SUPP ), +FLAG (l,PCI_IDE_CAP_AGGREGATION_SUPP ), +FLAG (l,PCI_IDE_CAP_PCRC_SUPP ), +FLAG (l,PCI_IDE_CAP_IDE_KM_SUPP )); + + l =get_conf_long (d, where +PCI_IDE_CTL ); +printf ("\t\tIDECtl: IntEn%c\n" , +FLAG (l,PCI_IDE_CTL_FLOWTHROUGH_IDE )); + +// The rest of the capability is variable length arrays + off = where +PCI_IDE_CAP +PCI_IDE_LINK_STREAM ; + +// Link IDE Register Block repeated 0 to 8 times +if (linknum) + { +if (!config_fetch (d, off,8 * linknum)) + { +printf ("\t\t<unreadable>\n" ); +return ; + } +for (i =0 ; i < linknum; ++i) + { +// Link IDE Stream Control Register + l =get_conf_long (d, off); + off +=4 ; +printf ("\t\tLinkIDE#%d Ctl: En%c NPR%s PR%s CPL%s PCRC%c HdrEnc=%s Alg='%s' TC%d ID%d\n" , + i, +FLAG (l,PCI_IDE_LINK_CTL_EN ), + aggr[PCI_IDE_LINK_CTL_TX_AGGR_NPR (l)], + aggr[PCI_IDE_LINK_CTL_TX_AGGR_PR (l)], + aggr[PCI_IDE_LINK_CTL_TX_AGGR_CPL (l)], +FLAG (l,PCI_IDE_LINK_CTL_EN ), +TABLE (hdr_enc_mode,PCI_IDE_LINK_CTL_PART_ENC (l), buf1), +TABLE (algo,PCI_IDE_LINK_CTL_ALG (l), buf2), +PCI_IDE_LINK_CTL_TC (l), +PCI_IDE_LINK_CTL_ID (l) + ); + +/* Link IDE Stream Status Register */ + l =get_conf_long (d, off); + off +=4 ; +printf ("\t\tLinkIDE#%d Sta: Status=%s RecvChkFail%c\n" , + i, +TABLE (stream_state,PCI_IDE_LINK_STS_STATUS (l), buf1), +FLAG (l,PCI_IDE_LINK_STS_RECVD_INTEGRITY_CHECK )); + } + } + +for (i =0 ; i < linknum; ++i) + { +// Fetching Selective IDE Stream Capability/Control/Status/RID1/RID2 +if (!config_fetch (d, off,20 )) + { +printf ("\t\t<unreadable>\n" ); +return ; + } + +// Selective IDE Stream Capability Register + l =get_conf_long (d, off); + off +=4 ; + addrnum =PCI_IDE_SEL_CAP_BLOCKS_NUM (l); + +// Selective IDE Stream Control Register + l =get_conf_long (d, off); + off +=4 ; + +printf ("\t\tSelectiveIDE#%d Ctl: En%c NPR%s PR%s CPL%s PCRC%c HdrEnc=%s Alg='%s' TC%d ID%d%s\n" , + i, +FLAG (l,PCI_IDE_SEL_CTL_EN ), + aggr[PCI_IDE_SEL_CTL_TX_AGGR_NPR (l)], + aggr[PCI_IDE_SEL_CTL_TX_AGGR_PR (l)], + aggr[PCI_IDE_SEL_CTL_TX_AGGR_CPL (l)], +FLAG (l,PCI_IDE_SEL_CTL_PCRC_EN ), +TABLE (hdr_enc_mode,PCI_IDE_SEL_CTL_PART_ENC (l), buf1), +TABLE (algo,PCI_IDE_SEL_CTL_ALG (l), buf2), +PCI_IDE_SEL_CTL_TC (l), +PCI_IDE_SEL_CTL_ID (l), + (l &PCI_IDE_SEL_CTL_DEFAULT ) ?" Default" :"" + ); + +// Selective IDE Stream Status Register + l =get_conf_long (d, off); + off +=4 ; + +printf ("\t\tSelectiveIDE#%d Sta: %s RecvChkFail%c\n" , + i, +TABLE (stream_state,PCI_IDE_SEL_STS_STATUS (l), buf1), +FLAG (l,PCI_IDE_SEL_STS_RECVD_INTEGRITY_CHECK )); + +// IDE RID Association Registers + l =get_conf_long (d, off); + off +=4 ; + l2 =get_conf_long (d, off); + off +=4 ; + +printf ("\t\tSelectiveIDE#%d RID: Valid%c Base=%x Limit=%x SegBase=%x\n" , + i, +FLAG (l2,PCI_IDE_SEL_RID_2_VALID ), +PCI_IDE_SEL_RID_2_BASE (l2), +PCI_IDE_SEL_RID_1_LIMIT (l), +PCI_IDE_SEL_RID_2_SEG_BASE (l2)); + +if (!config_fetch (d, off, addrnum *12 )) + { +printf ("\t\t<unreadable>\n" ); +return ; + } + +// IDE Address Association Registers +for (j =0 ; j < addrnum; ++j) + { +u64 limit, base; + + l =get_conf_long (d, off); + off +=4 ; + limit =get_conf_long (d, off); + off +=4 ; + base =get_conf_long (d, off); + off +=4 ; +printf ("\t\tSelectiveIDE#%d RID: Valid%c Base=%lx Limit=%lx\n" , + i, +FLAG (l,PCI_IDE_SEL_ADDR_1_VALID ), + (base <<32 ) |PCI_IDE_SEL_ADDR_1_BASE_LOW (l), + (limit <<32 ) |PCI_IDE_SEL_ADDR_1_LIMIT_LOW (l)); + } + } +} +void show_ext_caps (struct device *d,int type) {@@ -1621,6 +1780,9 @@ show_ext_caps(struct device *d, int type)case PCI_EXT_CAP_ID_DOE :cap_doe (d, where);break ; +case PCI_EXT_CAP_ID_IDE : +cap_ide (d, where); +break ;default :printf ("Extended Capability ID %#02x\n" , id);break ;
Signature · 1 line
Alexey
Re: [PATCH pciutils 2/2] pciutils: Add decode support for IDE Extended Capability
In reply to Alexey KardashevskiyQuoted 6 lines · Alexey Kardashevskiy
IDE (Integrity & Data Encryption) Extended Capability defined in [1] implements control of the PCI link encryption.
The example output is:
Capabilities: [830 v1] IDE
Possibly expand "IDE"? Many other Capabilities are spelled out:
Capabilities: [c0] Express Downstream Port (Slot+), MSI 00
Capabilities: [100] Device Serial Number 5f-2f-9d-40-30-f1-0c-00
Capabilities: [200] Advanced Error Reporting
Capabilities: [300] Virtual Channel
Capabilities: [400] Power Budgeting <?>
Capabilities: [500] Vendor Specific Information: ID=1234 Rev=1 Len=0d8 <?>
Capabilities: [700] Secondary PCI Express
Re: [PATCH pciutils 2/2] pciutils: Add decode support for IDE Extended Capability
Hello!
Quoted 3 lines
Quoted 1 line
Capabilities: [830 v1] IDE
Possibly expand "IDE"? [...]
Yes, please.
Also, could you please provide some test data (a dump of config space which contains this capability)? See also the dumps in the "tests" directory.
Have a nice fortnight
Signature · 2 lines
Martin `MJ' Mareš <[email protected]> http://mj.ucw.cz/ United Computer Wizards, Prague, Czech Republic, Europe, Earth, Universe