arch/arm64: Fix typos
Subsystems (16)
PATCH 1/1 arch/arm64: Fix typos
From: Bjorn Helgaas <[email protected]>
Fix typos, most reported by "codespell arch/arm64". Only touches comments, no code changes.
--- arch/arm64/Kconfig | 2 +- arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts | 2 +- arch/arm64/boot/dts/apm/apm-shadowcat.dtsi | 2 +- arch/arm64/boot/dts/apm/apm-storm.dtsi | 2 +- arch/arm64/boot/dts/exynos/exynos7.dtsi | 2 +- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 2 +- arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts | 2 +- arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi | 2 +- arch/arm64/boot/dts/qcom/msm8916.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi | 2 +- arch/arm64/boot/dts/qcom/sa8155p.dtsi | 2 +- arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts | 2 +- arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi | 2 +- arch/arm64/boot/dts/renesas/draak.dtsi | 2 +- arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts | 2 +- arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi | 2 +- arch/arm64/include/asm/assembler.h | 4 ++-- arch/arm64/include/asm/cpufeature.h | 4 ++-- arch/arm64/include/asm/kvm_hyp.h | 2 +- arch/arm64/include/asm/pgtable.h | 2 +- arch/arm64/include/asm/suspend.h | 2 +- arch/arm64/include/asm/traps.h | 4 ++-- arch/arm64/kernel/acpi.c | 2 +- arch/arm64/kernel/cpufeature.c | 6 +++--- arch/arm64/kernel/entry-common.c | 2 +- arch/arm64/kernel/entry-ftrace.S | 2 +- arch/arm64/kernel/entry.S | 2 +- arch/arm64/kernel/ftrace.c | 2 +- arch/arm64/kernel/machine_kexec.c | 2 +- arch/arm64/kernel/probes/uprobes.c | 2 +- arch/arm64/kernel/sdei.c | 2 +- arch/arm64/kernel/smp.c | 2 +- arch/arm64/kernel/traps.c | 2 +- arch/arm64/kvm/arch_timer.c | 2 +- arch/arm64/kvm/fpsimd.c | 2 +- arch/arm64/kvm/hyp/nvhe/host.S | 2 +- arch/arm64/kvm/hyp/nvhe/mm.c | 4 ++-- arch/arm64/kvm/inject_fault.c | 2 +- arch/arm64/kvm/vgic/vgic-init.c | 2 +- arch/arm64/kvm/vgic/vgic-its.c | 4 ++-- 41 files changed, 50 insertions(+), 50 deletions(-)
arch/arm64/Kconfig +1 -1
@@ -2227,7 +2227,7 @@ config CMDLINE default "" help Provide a set of default command-line options at build time by - entering them here. As a minimum, you should specify the the + entering them here. As a minimum, you should specify the root device (e.g. root=/dev/nfs). choice
arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts +1 -1
@@ -16,7 +16,7 @@ &backlight { * PWM backlight circuit on this PinePhone revision was changed since * 1.0, and the lowest PWM duty cycle that doesn't lead to backlight * being off is around 20%. Duty cycle for the lowest brightness level - * also varries quite a bit between individual boards, so the lowest + * also varies quite a bit between individual boards, so the lowest * value here was chosen as a safe default. */ brightness-levels = <
arch/arm64/boot/dts/apm/apm-shadowcat.dtsi +1 -1
@@ -123,7 +123,7 @@ gic: interrupt-controller@78090000 { #address-cells = <2>; #size-cells = <2>; interrupt-controller; - interrupts = <1 9 0xf04>; /* GIC Maintenence IRQ */ + interrupts = <1 9 0xf04>; /* GIC Maintenance IRQ */ ranges = <0 0 0 0x79000000 0x0 0x800000>; /* MSI Range */ reg = <0x0 0x78090000 0x0 0x10000>, /* GIC Dist */ <0x0 0x780a0000 0x0 0x20000>, /* GIC CPU */
arch/arm64/boot/dts/apm/apm-storm.dtsi +1 -1
@@ -109,7 +109,7 @@ gic: interrupt-controller@78010000 { <0x0 0x78020000 0x0 0x1000>, /* GIC CPU */ <0x0 0x78040000 0x0 0x2000>, /* GIC VCPU Control */ <0x0 0x78060000 0x0 0x2000>; /* GIC VCPU */ - interrupts = <1 9 0xf04>; /* GIC Maintenence IRQ */ + interrupts = <1 9 0xf04>; /* GIC Maintenance IRQ */ }; timer {
arch/arm64/boot/dts/exynos/exynos7.dtsi +1 -1
@@ -645,7 +645,7 @@ tmuctrl_0: tmu@10060000 { ufs: ufs@15570000 { compatible = "samsung,exynos7-ufs"; reg = <0x15570000 0x100>, /* 0: HCI standard */ - <0x15570100 0x100>, /* 1: Vendor specificed */ + <0x15570100 0x100>, /* 1: Vendor specified */ <0x15571000 0x200>, /* 2: UNIPRO */ <0x15572000 0x300>; /* 3: UFS protector */ reg-names = "hci", "vs_hci", "unipro", "ufsp";
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +1 -1
@@ -150,7 +150,7 @@ gic: interrupt-controller@6000000 { its: msi-controller@6020000 { compatible = "arm,gic-v3-its"; msi-controller; - reg = <0x0 0x06020000 0 0x20000>;/* GIC Translater */ + reg = <0x0 0x06020000 0 0x20000>;/* GIC Translator */ }; };
arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts +1 -1
@@ -1,6 +1,6 @@ // SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * Device Tree file for Travese Ten64 (LS1088) board + * Device Tree file for Traverse Ten64 (LS1088) board * Based on fsl-ls1088a-rdb.dts * Copyright 2017-2020 NXP * Copyright 2019-2021 Traverse Technologies
arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi +1 -1
@@ -504,7 +504,7 @@ pinctrl_hog2: hog2grp { /* * This pin is used in the SCFW as a UART. Using it from - * Linux would require rewritting the SCFW board file. + * Linux would require rewriting the SCFW board file. */ pinctrl_hog_scfw: hogscfwgrp { fsl,pins = <IMX8QXP_SCU_GPIO0_00_LSIO_GPIO2_IO03 0x20>; /* SODIMM 144 */
arch/arm64/boot/dts/qcom/msm8916.dtsi +2 -2
@@ -666,12 +666,12 @@ in-ports { /* * Not described input ports: - * 0 - connected to Resource and Power Manger CPU ETM + * 0 - connected to Resource and Power Manager CPU ETM * 1 - not-connected * 2 - connected to Modem CPU ETM * 3 - not-connected * 5 - not-connected - * 6 - connected trought funnel to Wireless CPU ETM + * 6 - connected through funnel to Wireless CPU ETM * 7 - connected to STM component */
arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi +1 -1
@@ -857,7 +857,7 @@ &sdhc1 { status = "okay"; /* - * This device is shipped with HS400 capabable eMMCs + * This device is shipped with HS400 capable eMMCs * However various brands have been used in various product batches, * including a Samsung eMMC (BGND3R) which features a quirk with HS400. * Set the speed to HS200 as a safety measure.
arch/arm64/boot/dts/qcom/sa8155p.dtsi +1 -1
@@ -4,7 +4,7 @@ * * SA8155P is an automotive variant of SM8150, with some minor changes. * Most notably, the RPMhPD setup differs: MMCX and LCX/LMX rails are gone, - * though the cmd-db doesn't reflect that and access attemps result in a bite. + * though the cmd-db doesn't reflect that and access attempts result in a bite. */ #include "sm8150.dtsi"
arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi +2 -2
@@ -563,8 +563,8 @@ &sdc1_rclk { * * This has entries that are defined by Qcard even if they go to the main * board. In cases where the pulls may be board dependent we defer those - * settings to the board device tree. Drive strengths tend to be assinged here - * but could conceivably be overwridden by board device trees. + * settings to the board device tree. Drive strengths tend to be assigned here + * but could conceivably be overridden by board device trees. */ &pm8350c_gpios {
arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts +1 -1
@@ -168,7 +168,7 @@ vph_pwr: vph-pwr-regulator { * Supply map from xiaomi-lavender specifies this as the supply for * ldob1, ldob9, ldob10, ldoa2, and ldoa3, while downstream specifies * this as a power domain. Set this as a fixed regulator with the same - * voltage as lavender until display is needed to avoid unneccessarily + * voltage as lavender until display is needed to avoid unnecessarily * using a deprecated binding (regulator-fixed-domain). */ vreg_s2b_1p05: vreg-s2b-regulator {
arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi +1 -1
@@ -305,7 +305,7 @@ vreg_l19a_2p7: ldo19 { regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; /* - * The driver *really* doesn't want this regualtor to exist, + * The driver *really* doesn't want this regulator to exist, * saying that it could not get the current voltage (-ENOTRECOVERABLE) * even though it surely is used on these devices (as a voltage * source for camera autofocus)
arch/arm64/boot/dts/renesas/draak.dtsi +1 -1
@@ -226,7 +226,7 @@ &audio_clk_b { /* * X11 is connected to VI4_FIELD/SCIF_CLK/AUDIO_CLKB, * and R-Car Sound uses AUDIO_CLKB. - * Note is that schematic indicates VI4_FIELD conection only + * Note is that schematic indicates VI4_FIELD connection only * not AUDIO_CLKB at SoC page. * And this VI4_FIELD/SCIF_CLK/AUDIO_CLKB is connected to SW60. * SW60 should be 1-2.
arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts +1 -1
@@ -9,7 +9,7 @@ /* * Notice: * 1. rk3399-roc-pc-plus is powered by dc_12v directly. - * 2. rk3399-roc-pc-plus has only vcc_bus_typec0 in schematic, which is coresponding + * 2. rk3399-roc-pc-plus has only vcc_bus_typec0 in schematic, which is corresponding * to vcc_vbus_typec1 in rk3399-roc-pc. * For simplicity, reserve the node name of vcc_vbus_typec1. * 3. vcc5v0_host is actually 2 regulators (host0, 1) controlled by the same gpio.
arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi +1 -1
@@ -1415,7 +1415,7 @@ &usbss0 { status = "disabled"; }; -/* TODO: role swich using ID pin */ +/* TODO: role switch using ID pin */ &usb0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb0_id>;
arch/arm64/include/asm/assembler.h +2 -2
@@ -390,7 +390,7 @@ alternative_endif* [start, end) with dcache line size explicitly provided. * * op: operation passed to dc instruction -* domain: domain used in dsb instruciton +* domain: domain used in dsb instruction * start: starting virtual address of the region * end: end virtual address of the region * linesz: dcache line size
@@ -431,7 +431,7 @@ alternative_endif* [start, end) * * op: operation passed to dc instruction -* domain: domain used in dsb instruciton +* domain: domain used in dsb instruction * start: starting virtual address of the region * end: end virtual address of the region * fixup: optional label to branch to on user fault
arch/arm64/include/asm/cpufeature.h +2 -2
@@ -198,7 +198,7 @@ extern struct arm64_ftr_reg arm64_ftr_reg_ctrel0;* registers (e.g, SCTLR, TCR etc.) or patching the kernel via * alternatives. The kernel patching is batched and performed at later * point. The actions are always initiated only after the capability -* is finalised. This is usally denoted by "enabling" the capability. +* is finalised. This is usually denoted by "enabling" the capability. * The actions are initiated as follows : * a) Action is triggered on all online CPUs, after the capability is * finalised, invoked within the stop_machine() context from
@@ -250,7 +250,7 @@ extern struct arm64_ftr_reg arm64_ftr_reg_ctrel0;#define ARM64_CPUCAP_SCOPE_LOCAL_CPU ((u16)BIT(0))#define ARM64_CPUCAP_SCOPE_SYSTEM ((u16)BIT(1))/* -* The capabilitiy is detected on the Boot CPU and is used by kernel +* The capability is detected on the Boot CPU and is used by kernel * during early boot. i.e, the capability should be "detected" and * "enabled" as early as possibly on all booting CPUs. */
arch/arm64/include/asm/kvm_hyp.h +1 -1
@@ -70,7 +70,7 @@ DECLARE_PER_CPU(struct kvm_nvhe_init_params, kvm_init_params);/* * Without an __arch_swab32(), we fall back to ___constant_swab32(), but the * static inline can allow the compiler to out-of-line this. KVM always wants -* the macro version as its always inlined. +* the macro version as it's always inlined. */ #define __kvm_swab32 (x) ___constant_swab32(x)
arch/arm64/include/asm/pgtable.h +1 -1
@@ -288,7 +288,7 @@ bool pgattr_change_is_safe(u64 old, u64 new);* 1 0 | 1 0 1 * 1 1 | 0 1 x * -* When hardware DBM is not present, the sofware PTE_DIRTY bit is updated via +* When hardware DBM is not present, the software PTE_DIRTY bit is updated via * the page fault mechanism. Checking the dirty status of a pte becomes: * * PTE_DIRTY || (PTE_WRITE && !PTE_RDONLY)
arch/arm64/include/asm/suspend.h +1 -1
@@ -23,7 +23,7 @@ struct cpu_suspend_ctx {* __cpu_suspend_enter()'s caller, and populated by __cpu_suspend_enter(). * This data must survive until cpu_resume() is called. * -* This struct desribes the size and the layout of the saved cpu state. +* This struct describes the size and the layout of the saved cpu state. * The layout of the callee_saved_regs is defined by the implementation * of __cpu_suspend_enter(), and cpu_resume(). This struct must be passed * in by the caller as __cpu_suspend_enter()'s stack-frame is gone once it
arch/arm64/include/asm/traps.h +2 -2
@@ -52,8 +52,8 @@ static inline int in_entry_text(unsigned long ptr)* CPUs with the RAS extensions have an Implementation-Defined-Syndrome bit * to indicate whether this ESR has a RAS encoding. CPUs without this feature * have a ISS-Valid bit in the same position. -* If this bit is set, we know its not a RAS SError. -* If its clear, we need to know if the CPU supports RAS. Uncategorized RAS +* If this bit is set, we know it's not a RAS SError. +* If it's clear, we need to know if the CPU supports RAS. Uncategorized RAS * errors share the same encoding as an all-zeros encoding from a CPU that * doesn't support RAS. */
arch/arm64/kernel/acpi.c +1 -1
@@ -128,7 +128,7 @@ static int __init acpi_fadt_sanity_check(void)/* * FADT is required on arm64; retrieve it to check its presence -* and carry out revision and ACPI HW reduced compliancy tests +* and carry out revision and ACPI HW reduced compliance tests */ status =acpi_get_table (ACPI_SIG_FADT ,0 , &table);if (ACPI_FAILURE (status)) {
arch/arm64/kernel/cpufeature.c +3 -3
@@ -748,7 +748,7 @@ static int search_cmp_ftr_reg(const void *id, const void *regp)* entry. * * returns - Upon success, matching ftr_reg entry for id. -* - NULL on failure. It is upto the caller to decide +* - NULL on failure. It is up to the caller to decide * the impact of a failure. */ static struct arm64_ftr_reg *get_arm64_ftr_reg_nowarn (u32 sys_id)
@@ -874,7 +874,7 @@ static void __init sort_ftr_regs(void)/* * Initialise the CPU feature register from Boot CPU values. -* Also initiliases the strict_mask for the register. +* Also initialises the strict_mask for the register. * Any bits that are not covered by an arm64_ftr_bits entry are considered * RES0 for the system-wide value, and must strictly match. */
@@ -3108,7 +3108,7 @@ static void verify_local_cpu_caps(u16 scope_mask)/* * We have to issue cpu_enable() irrespective of * whether the CPU has it or not, as it is enabeld -* system wide. It is upto the call back to take +* system wide. It is up to the call back to take * appropriate action on this CPU. */ if (caps->cpu_enable)
arch/arm64/kernel/entry-common.c +1 -1
@@ -660,7 +660,7 @@ static void noinstr el0_inv(struct pt_regs *regs, unsigned long esr) static void noinstr el0_dbg(struct pt_regs *regs, unsigned long esr) { -/* Only watchpoints write FAR_EL1, otherwise its UNKNOWN */ +/* Only watchpoints write FAR_EL1, otherwise it's UNKNOWN */ unsigned long far =read_sysreg (far_el1);enter_from_user_mode (regs);
arch/arm64/kernel/entry-ftrace.S +1 -1
@@ -94,7 +94,7 @@ SYM_CODE_START(ftrace_caller) stp x29, x30, [sp, #FREGS_SIZE] add x29, sp, #FREGS_SIZE - /* Prepare arguments for the the tracer func */ + /* Prepare arguments for the tracer func */ sub x0, x30, #AARCH64_INSN_SIZE // ip (callsite's BL insn) mov x1, x9 // parent_ip (callsite's LR) mov x3, sp // regs
arch/arm64/kernel/entry.S +1 -1
@@ -547,7 +547,7 @@ SYM_CODE_START_LOCAL(__bad_stack) mrs x0, tpidrro_el0 /* - * Store the original GPRs to the new stack. The orginal SP (minus + * Store the original GPRs to the new stack. The original SP (minus * PT_REGS_SIZE) was stashed in tpidr_el0 by kernel_ventry. */ sub sp, sp, #PT_REGS_SIZE
arch/arm64/kernel/ftrace.c +1 -1
@@ -423,7 +423,7 @@ int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec,return ret;/* -* When using mcount, callsites in modules may have been initalized to +* When using mcount, callsites in modules may have been initialized to * call an arbitrary module PLT (which redirects to the _mcount stub) * rather than the ftrace PLT we'll use at runtime (which redirects to * the ftrace trampoline). We can ignore the old PLT when initializing
arch/arm64/kernel/machine_kexec.c +1 -1
@@ -296,7 +296,7 @@ void crash_post_resume(void)* marked as Reserved as memory was allocated via memblock_reserve(). * * In hibernation, the pages which are Reserved and yet "nosave" are excluded -* from the hibernation iamge. crash_is_nosave() does thich check for crash +* from the hibernation image. crash_is_nosave() does this check for crash * dump kernel and will reduce the total size of hibernation image. */
arch/arm64/kernel/probes/uprobes.c +1 -1
@@ -122,7 +122,7 @@ void arch_uprobe_abort_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)struct uprobe_task *utask = current->utask;/* -* Task has received a fatal signal, so reset back to probbed +* Task has received a fatal signal, so reset back to probed * address. */ instruction_pointer_set (regs, utask->vaddr);
arch/arm64/kernel/sdei.c +1 -1
@@ -206,7 +206,7 @@ unsigned long sdei_arch_get_entry_point(int conduit)/* * do_sdei_event() returns one of: * SDEI_EV_HANDLED - success, return to the interrupted context. -* SDEI_EV_FAILED - failure, return this error code to firmare. +* SDEI_EV_FAILED - failure, return this error code to firmware. * virtual-address - success, return to this address. */ unsigned long __kprobes do_sdei_event(struct pt_regs *regs,
arch/arm64/kernel/smp.c +1 -1
@@ -351,7 +351,7 @@ void arch_cpuhp_cleanup_dead_cpu(unsigned int cpu)/* * Now that the dying CPU is beyond the point of no return w.r.t. -* in-kernel synchronisation, try to get the firwmare to help us to +* in-kernel synchronisation, try to get the firmware to help us to * verify that it has really left the kernel before we consider * clobbering anything it might still be using. */
arch/arm64/kernel/traps.c +1 -1
@@ -897,7 +897,7 @@ void __noreturn panic_bad_stack(struct pt_regs *regs, unsigned long esr, unsigne__show_regs (regs);/* -* We use nmi_panic to limit the potential for recusive overflows, and +* We use nmi_panic to limit the potential for recursive overflows, and * to get a better stack trace. */ nmi_panic (NULL ,"kernel stack overflow" );
arch/arm64/kvm/arch_timer.c +1 -1
@@ -746,7 +746,7 @@ static void kvm_timer_vcpu_load_nested_switch(struct kvm_vcpu *vcpu,WARN_ON_ONCE (ret);/* -* The virtual offset behaviour is "interresting", as it +* The virtual offset behaviour is "interesting", as it * always applies when HCR_EL2.E2H==0, but only when * accessed from EL1 when HCR_EL2.E2H==1. So make sure we * track E2H when putting the HV timer in "direct" mode.
arch/arm64/kvm/fpsimd.c +1 -1
@@ -117,7 +117,7 @@ void kvm_arch_vcpu_load_fp(struct kvm_vcpu *vcpu) }/* -* Called just before entering the guest once we are no longer preemptable +* Called just before entering the guest once we are no longer preemptible * and interrupts are disabled. If we have managed to run anything using * FP while we were preemptible (such as off the back of an interrupt), * then neither the host nor the guest own the FP hardware (and it was the
arch/arm64/kvm/hyp/nvhe/host.S +1 -1
@@ -110,7 +110,7 @@ SYM_FUNC_END(__host_enter) * u64 elr, u64 par); */ SYM_FUNC_START(__hyp_do_panic) - /* Prepare and exit to the host's panic funciton. */ + /* Prepare and exit to the host's panic function. */ mov lr, #(PSR_F_BIT | PSR_I_BIT | PSR_A_BIT | PSR_D_BIT |\ PSR_MODE_EL1h) msr spsr_el2, lr
arch/arm64/kvm/hyp/nvhe/mm.c +2 -2
@@ -155,7 +155,7 @@ int hyp_back_vmemmap(phys_addr_t back) start = hyp_memory[i].base; start =ALIGN_DOWN ((u64 )hyp_phys_to_page (start),PAGE_SIZE );/* -* The begining of the hyp_vmemmap region for the current +* The beginning of the hyp_vmemmap region for the current * memblock may already be backed by the page backing the end * the previous region, so avoid mapping it twice. */
@@ -408,7 +408,7 @@ static void *admit_host_page(void *arg)return pop_hyp_memcache (host_mc, hyp_phys_to_virt); } -/* Refill our local memcache by poping pages from the one provided by the host. */ +/* Refill our local memcache by popping pages from the one provided by the host. */ int refill_memcache (struct kvm_hyp_memcache *mc,unsigned long min_pages,struct kvm_hyp_memcache *host_mc) {
arch/arm64/kvm/inject_fault.c +1 -1
@@ -134,7 +134,7 @@ static void inject_abt32(struct kvm_vcpu *vcpu, bool is_pabt, u32 addr)if (vcpu_read_sys_reg (vcpu,TCR_EL1 ) &TTBCR_EAE ) { fsr =DFSR_LPAE |DFSR_FSC_EXTABT_LPAE ; }else { -/* no need to shuffle FS[4] into DFSR[10] as its 0 */ +/* no need to shuffle FS[4] into DFSR[10] as it's 0 */ fsr = DFSR_FSC_EXTABT_nLPAE; }
arch/arm64/kvm/vgic/vgic-init.c +1 -1
@@ -309,7 +309,7 @@ int vgic_init(struct kvm *kvm)vgic_lpi_translation_cache_init (kvm);/* -* If we have GICv4.1 enabled, unconditionnaly request enable the +* If we have GICv4.1 enabled, unconditionally request enable the * v4 support so that we get HW-accelerated vSGIs. Otherwise, only * enable it if we present a virtual ITS to the guest. */
arch/arm64/kvm/vgic/vgic-its.c +2 -2
@@ -1337,8 +1337,8 @@ static int vgic_its_cmd_handle_inv(struct kvm *kvm, struct vgic_its *its, }/** -* vgic_its_invall - invalidate all LPIs targetting a given vcpu -* @vcpu: the vcpu for which the RD is targetted by an invalidation +* vgic_its_invall - invalidate all LPIs targeting a given vcpu +* @vcpu: the vcpu for which the RD is targeted by an invalidation * * Contrary to the INVALL command, this targets a RD instead of a * collection, and we don't need to hold the its_lock, since no ITS is
Signature · 1 line
2.34.1
Quoted 56 lines · Bjorn Helgaas
From: Bjorn Helgaas <[email protected]>
Fix typos, most reported by "codespell
arch/arm64". Only touches comments, no code changes.Signed-off-by Bjorn Helgaas <[email protected]>--- arch/arm64/Kconfig | 2 +- arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts | 2 +- arch/arm64/boot/dts/apm/apm-shadowcat.dtsi | 2 +- arch/arm64/boot/dts/apm/apm-storm.dtsi | 2 +- arch/arm64/boot/dts/exynos/exynos7.dtsi | 2 +- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 2 +- arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts | 2 +- arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi | 2 +- arch/arm64/boot/dts/qcom/msm8916.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi | 2 +- arch/arm64/boot/dts/qcom/sa8155p.dtsi | 2 +- arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts | 2 +- arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi | 2 +- arch/arm64/boot/dts/renesas/draak.dtsi | 2 +- arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts | 2 +- arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi | 2 +- arch/arm64/include/asm/assembler.h | 4 ++-- arch/arm64/include/asm/cpufeature.h | 4 ++-- arch/arm64/include/asm/kvm_hyp.h | 2 +- arch/arm64/include/asm/pgtable.h | 2 +- arch/arm64/include/asm/suspend.h | 2 +- arch/arm64/include/asm/traps.h | 4 ++-- arch/arm64/kernel/acpi.c | 2 +- arch/arm64/kernel/cpufeature.c | 6 +++--- arch/arm64/kernel/entry-common.c | 2 +- arch/arm64/kernel/entry-ftrace.S | 2 +- arch/arm64/kernel/entry.S | 2 +- arch/arm64/kernel/ftrace.c | 2 +- arch/arm64/kernel/machine_kexec.c | 2 +- arch/arm64/kernel/probes/uprobes.c | 2 +- arch/arm64/kernel/sdei.c | 2 +- arch/arm64/kernel/smp.c | 2 +- arch/arm64/kernel/traps.c | 2 +- arch/arm64/kvm/arch_timer.c | 2 +- arch/arm64/kvm/fpsimd.c | 2 +- arch/arm64/kvm/hyp/nvhe/host.S | 2 +- arch/arm64/kvm/hyp/nvhe/mm.c | 4 ++-- arch/arm64/kvm/inject_fault.c | 2 +- arch/arm64/kvm/vgic/vgic-init.c | 2 +- arch/arm64/kvm/vgic/vgic-its.c | 4 ++-- 41 files changed, 50 insertions(+), 50 deletions(-)arch/arm64/boot/dts/qcom/sa8155p.dtsi +0
-0
arch/arm64/boot/dts/qcom/sa8155p.dtsi line 7
Quoted 5 lines
arch/arm64/boot/dts/qcom/sa8155p.dtsi +1
-1@@ -4,7 +4,7 @@ * * SA8155P is an automotive variant of SM8150, with some minor changes. * Most notably, the RPMhPD setup differs: MMCX and LCX/LMX rails are gone, - * though the cmd-db doesn't reflect that and access attemps result in a bite. + * though the cmd-db doesn't reflect that and access attempts result in a bite.
bite, eh?
arch/arm64/boot/dts/qcom/sa8155p.dtsi line 10
Quoted 3 lines
arch/arm64/boot/dts/qcom/sa8155p.dtsi +0
-0*/ #include "sm8150.dtsi"
Thanks.
Signature · 1 line
#Randy
Will Deacon
maintainerHey Bjorn,
Quoted 41 lines · Bjorn Helgaas
From: Bjorn Helgaas <[email protected]>
Fix typos, most reported by "codespell
arch/arm64". Only touches comments, no code changes.Signed-off-by Bjorn Helgaas <[email protected]>--- arch/arm64/Kconfig | 2 +- arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts | 2 +- arch/arm64/boot/dts/apm/apm-shadowcat.dtsi | 2 +- arch/arm64/boot/dts/apm/apm-storm.dtsi | 2 +- arch/arm64/boot/dts/exynos/exynos7.dtsi | 2 +- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 2 +- arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts | 2 +- arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi | 2 +- arch/arm64/boot/dts/qcom/msm8916.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon.dtsi | 2 +- arch/arm64/boot/dts/qcom/sa8155p.dtsi | 2 +- arch/arm64/boot/dts/qcom/sc7280-qcard.dtsi | 4 ++-- arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts | 2 +- arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi | 2 +- arch/arm64/boot/dts/renesas/draak.dtsi | 2 +- arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts | 2 +- arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi | 2 +- arch/arm64/include/asm/assembler.h | 4 ++-- arch/arm64/include/asm/cpufeature.h | 4 ++-- arch/arm64/include/asm/kvm_hyp.h | 2 +- arch/arm64/include/asm/pgtable.h | 2 +- arch/arm64/include/asm/suspend.h | 2 +- arch/arm64/include/asm/traps.h | 4 ++-- arch/arm64/kernel/acpi.c | 2 +- arch/arm64/kernel/cpufeature.c | 6 +++--- arch/arm64/kernel/entry-common.c | 2 +- arch/arm64/kernel/entry-ftrace.S | 2 +- arch/arm64/kernel/entry.S | 2 +- arch/arm64/kernel/ftrace.c | 2 +- arch/arm64/kernel/machine_kexec.c | 2 +- arch/arm64/kernel/probes/uprobes.c | 2 +- arch/arm64/kernel/sdei.c | 2 +- arch/arm64/kernel/smp.c | 2 +- arch/arm64/kernel/traps.c | 2 +-
Quoted 8 lines
arch/arm64/kvm/arch_timer.c | 2 +- arch/arm64/kvm/fpsimd.c | 2 +- arch/arm64/kvm/hyp/nvhe/host.S | 2 +- arch/arm64/kvm/hyp/nvhe/mm.c | 4 ++-- arch/arm64/kvm/inject_fault.c | 2 +- arch/arm64/kvm/vgic/vgic-init.c | 2 +- arch/arm64/kvm/vgic/vgic-its.c | 4 ++-- 41 files changed, 50 insertions(+), 50 deletions(-)
The maintenance of stuff under arch/arm64/ is distributed between a few different trees, so I think you'll need to split this into separate patches if you want to see it merged. Otherwise, it's going to lead to painful cross-tree conflicts and I suspect it would just get dropped seeing as it's not critical functionality.
The good news is that scripts/get_maintainer.pl knows about these trees and, looking quickly at this diffstat, you probably just want devicetree, kvmarm and me+Catalin.
Cheers,
Will