linux-yocto/6.6: arm: jitter entropy backport
PATCH 1/1 linux-yocto/6.6: arm: jitter entropy backport
From: Bruce Ashfield <[email protected]>
Integrating the following commit(s) to linux-yocto/6.6:
1/1 [
Author: Stephan Müller
Email: [email protected]
Subject: crypto: jitter - add RCT/APT support for different OSRs
Date: Thu, 21 Sep 2023 13:48:11 +0200
The oversampling rate (OSR) value specifies the heuristically implied entropy in the recorded data - H_submitter = 1/osr. A different entropy estimate implies a different APT/RCT cutoff value. This change adds support for OSRs 1 through 15. This OSR can be selected by the caller of the Jitter RNG.
For this patch, the caller still uses one hard-coded OSR. A subsequent patch allows this value to be configured.
In addition, the power-up self test is adjusted as follows:
* It allows the caller to provide an oversampling rate that should be tested with - commonly it should be the same as used for the actual runtime operation. This makes the power-up testing therefore consistent with the runtime operation.
* It calls now jent_measure_jitter (i.e. collects the full entropy that can possibly be harvested by the Jitter RNG) instead of only jent_condition_data (which only returns the entropy harvested from the conditioning component). This should now alleviate reports where the Jitter RNG initialization thinks there is too little entropy.
* The power-up test now solely relies on the (enhanced) APT and RCT test that is used as a health test at runtime.
The code allowing the different OSRs as well as the power-up test changes are present in the user space version of the Jitter RNG 3.4.1 and thus was already in production use for some time.
Reported-by "Ospan, Abylay" <[email protected]>
]
--- .../linux/linux-yocto-rt_6.6.bb | 2 +- .../linux/linux-yocto-tiny_6.6.bb | 2 +- meta/recipes-kernel/linux/linux-yocto_6.6.bb | 22 +++++++++---------- 3 files changed, 13 insertions(+), 13 deletions(-)
meta/recipes-kernel/linux/linux-yocto-rt_6.6.bb +1 -1
@@ -14,7 +14,7 @@ python () { raise bb.parse.SkipRecipe("Set PREFERRED_PROVIDER_virtual/kernel to linux-yocto-rt to enable it") } -SRCREV_machine ?= "bfa11b7b82a8d7a3c3f5a30813a8471be20449ab" +SRCREV_machine ?= "7e43b4538ce1a9084c4a5f1b22372c98aa888958" SRCREV_meta ?= "11390e802ca72f3549b9356f036b17e54afd7a34" SRC_URI = "git://git.yoctoproject.org/linux-yocto.git;branch=${KBRANCH};name=machine;protocol=https \
meta/recipes-kernel/linux/linux-yocto-tiny_6.6.bb +1 -1
@@ -17,7 +17,7 @@ DEPENDS += "openssl-native util-linux-native" KMETA = "kernel-meta" KCONF_BSP_AUDIT_LEVEL = "2" -SRCREV_machine ?= "50cd24ddb6f0bcae01623196515ce62527bb79df" +SRCREV_machine ?= "ff7ae7b32324226330214197e9b849d1aa35accd" SRCREV_meta ?= "11390e802ca72f3549b9356f036b17e54afd7a34" PV = "${LINUX_VERSION}+git"
meta/recipes-kernel/linux/linux-yocto_6.6.bb +11 -11
@@ -18,17 +18,17 @@ KBRANCH:qemux86-64 ?= "v6.6/standard/base" KBRANCH:qemuloongarch64 ?= "v6.6/standard/base" KBRANCH:qemumips64 ?= "v6.6/standard/mti-malta64" -SRCREV_machine:qemuarm ?= "30f04f32ffa4d5082530a2ce565387c09a98086d" -SRCREV_machine:qemuarm64 ?= "50cd24ddb6f0bcae01623196515ce62527bb79df" -SRCREV_machine:qemuloongarch64 ?= "50cd24ddb6f0bcae01623196515ce62527bb79df" -SRCREV_machine:qemumips ?= "382508b55bd871d9a81ab6d187abed39e59b277e" -SRCREV_machine:qemuppc ?= "50cd24ddb6f0bcae01623196515ce62527bb79df" -SRCREV_machine:qemuriscv64 ?= "50cd24ddb6f0bcae01623196515ce62527bb79df" -SRCREV_machine:qemuriscv32 ?= "50cd24ddb6f0bcae01623196515ce62527bb79df" -SRCREV_machine:qemux86 ?= "50cd24ddb6f0bcae01623196515ce62527bb79df" -SRCREV_machine:qemux86-64 ?= "50cd24ddb6f0bcae01623196515ce62527bb79df" -SRCREV_machine:qemumips64 ?= "90d9017819a05360dbf3fd2f6471cbbb3fe78db5" -SRCREV_machine ?= "50cd24ddb6f0bcae01623196515ce62527bb79df" +SRCREV_machine:qemuarm ?= "b0567ccb83b03434efe6bc00d7d672a59d50b82a" +SRCREV_machine:qemuarm64 ?= "ff7ae7b32324226330214197e9b849d1aa35accd" +SRCREV_machine:qemuloongarch64 ?= "ff7ae7b32324226330214197e9b849d1aa35accd" +SRCREV_machine:qemumips ?= "df19050d1276ce9418652a39c31b77925b18fb17" +SRCREV_machine:qemuppc ?= "ff7ae7b32324226330214197e9b849d1aa35accd" +SRCREV_machine:qemuriscv64 ?= "ff7ae7b32324226330214197e9b849d1aa35accd" +SRCREV_machine:qemuriscv32 ?= "ff7ae7b32324226330214197e9b849d1aa35accd" +SRCREV_machine:qemux86 ?= "ff7ae7b32324226330214197e9b849d1aa35accd" +SRCREV_machine:qemux86-64 ?= "ff7ae7b32324226330214197e9b849d1aa35accd" +SRCREV_machine:qemumips64 ?= "2cab83c3f46765b9390918a91c4fc64a873a3443" +SRCREV_machine ?= "ff7ae7b32324226330214197e9b849d1aa35accd" SRCREV_meta ?= "11390e802ca72f3549b9356f036b17e54afd7a34" # set your preferred provider of linux-yocto to 'linux-yocto-upstream', and you'll
Signature · 1 line
2.39.2