Skip to contentSkip to conversation

kunit: run test suites only after module initialization completes

PATCH In review Marco Pagani 3 participants 3 messages Jan 10, 2024 – Jan 26, 2024

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v4 1/1 kunit: run test suites only after module initialization completes

Commit 2810c1e99867 ("kunit: Fix wild-memory-access bug in kunit_free_suite_set()") fixed a wild-memory-access bug that could have happened during the loading phase of test suites built and executed as loadable modules. However, it also introduced a problematic side effect that causes test suites modules to crash when they attempt to register fake devices.

When a module is loaded, it traverses the MODULE_STATE_UNFORMED and MODULE_STATE_COMING states before reaching the normal operating state MODULE_STATE_LIVE. Finally, when the module is removed, it moves to MODULE_STATE_GOING before being released. However, if the loading function load_module() fails between complete_formation() and do_init_module(), the module goes directly from MODULE_STATE_COMING to MODULE_STATE_GOING without passing through MODULE_STATE_LIVE.

This behavior was causing kunit_module_exit() to be called without having first executed kunit_module_init(). Since kunit_module_exit() is responsible for freeing the memory allocated by kunit_module_init() through kunit_filter_suites(), this behavior was resulting in a wild-memory-access bug.

Commit 2810c1e99867 ("kunit: Fix wild-memory-access bug in kunit_free_suite_set()") fixed this issue by running the tests when the module is still in MODULE_STATE_COMING. However, modules in that state are not fully initialized, lacking sysfs kobjects. Therefore, if a test module attempts to register a fake device, it will inevitably crash.

This patch proposes a different approach to fix the original wild-memory-access bug while restoring the normal module execution flow by making kunit_module_exit() able to detect if kunit_module_init() has previously initialized the tests suite set. In this way, test modules can once again register fake devices without crashing.

This behavior is achieved by checking whether mod->kunit_suites is a virtual or direct mapping address. If it is a virtual address, then kunit_module_init() has allocated the suite_set in kunit_filter_suites() using kmalloc_array(). On the contrary, if mod->kunit_suites is still pointing to the original address that was set when looking up the .kunit_test_suites section of the module, then the loading phase has failed and there's no memory to be freed.

v4:
- rebased on 6.8
- noted that kunit_filter_suites() must return a virtual address v3:
- add a comment to clarify why the start address is checked v2:
- add include <linux/mm.h>

Fixes 2810c1e99867 ("kunit: Fix wild-memory-access bug in kunit_free_suite_set()")
---
 lib/kunit/executor.c |  4 ++++
 lib/kunit/test.c     | 14 +++++++++++---
 2 files changed, 15 insertions(+), 3 deletions(-)
lib/kunit/executor.c +4 -0
index 717b9599036b..689fff2b2b10 100644
@@ -146,6 +146,10 @@ void kunit_free_suite_set(struct kunit_suite_set suite_set)
 	kfree(suite_set.start);
 }
 
+/*
+ * Filter and reallocate test suites. Must return the filtered test suites set
+ * allocated at a valid virtual address or NULL in case of error.
+ */
 struct kunit_suite_set
 kunit_filter_suites(const struct kunit_suite_set *suite_set,
 		    const char *filter_glob,
lib/kunit/test.c +11 -3
index f95d2093a0aa..31a5a992e646 100644
@@ -17,6 +17,7 @@
 #include <linux/panic.h>
 #include <linux/sched/debug.h>
 #include <linux/sched.h>
+#include <linux/mm.h>
 
 #include "debugfs.h"
 #include "device-impl.h"
@@ -801,12 +802,19 @@ static void kunit_module_exit(struct module *mod)
 	};
 	const char *action = kunit_action();
 
+	/*
+	 * Check if the start address is a valid virtual address to detect
+	 * if the module load sequence has failed and the suite set has not
+	 * been initialized and filtered.
+	 */
+	if (!suite_set.start || !virt_addr_valid(suite_set.start))
+		return;
+
 	if (!action)
 		__kunit_test_suites_exit(mod->kunit_suites,
 					 mod->num_kunit_suites);
 
-	if (suite_set.start)
-		kunit_free_suite_set(suite_set);
+	kunit_free_suite_set(suite_set);
 }
 
 static int kunit_module_notify(struct notifier_block *nb, unsigned long val,
@@ -816,12 +824,12 @@ static int kunit_module_notify(struct notifier_block *nb, unsigned long val,
 
 	switch (val) {
 	case MODULE_STATE_LIVE:
+		kunit_module_init(mod);
 		break;
 	case MODULE_STATE_GOING:
 		kunit_module_exit(mod);
 		break;
 	case MODULE_STATE_COMING:
-		kunit_module_init(mod);
 		break;
 	case MODULE_STATE_UNFORMED:
 		break;

base-commit: 539e582a375dedee95a4fa9ca3f37cdb25c441ec

Signature · 1 line
2.43.0
Reviewed-by on v4 1/1
#1 lore raw
Quoted 50 lines · Marco Pagani

Commit 2810c1e99867 ("kunit: Fix wild-memory-access bug in kunit_free_suite_set()") fixed a wild-memory-access bug that could have happened during the loading phase of test suites built and executed as loadable modules. However, it also introduced a problematic side effect that causes test suites modules to crash when they attempt to register fake devices.

When a module is loaded, it traverses the MODULE_STATE_UNFORMED and MODULE_STATE_COMING states before reaching the normal operating state MODULE_STATE_LIVE. Finally, when the module is removed, it moves to MODULE_STATE_GOING before being released. However, if the loading function load_module() fails between complete_formation() and do_init_module(), the module goes directly from MODULE_STATE_COMING to MODULE_STATE_GOING without passing through MODULE_STATE_LIVE.

This behavior was causing kunit_module_exit() to be called without having first executed kunit_module_init(). Since kunit_module_exit() is responsible for freeing the memory allocated by kunit_module_init() through kunit_filter_suites(), this behavior was resulting in a wild-memory-access bug.

Commit 2810c1e99867 ("kunit: Fix wild-memory-access bug in kunit_free_suite_set()") fixed this issue by running the tests when the module is still in MODULE_STATE_COMING. However, modules in that state are not fully initialized, lacking sysfs kobjects. Therefore, if a test module attempts to register a fake device, it will inevitably crash.

This patch proposes a different approach to fix the original wild-memory-access bug while restoring the normal module execution flow by making kunit_module_exit() able to detect if kunit_module_init() has previously initialized the tests suite set. In this way, test modules can once again register fake devices without crashing.

This behavior is achieved by checking whether mod->kunit_suites is a virtual or direct mapping address. If it is a virtual address, then kunit_module_init() has allocated the suite_set in kunit_filter_suites() using kmalloc_array(). On the contrary, if mod->kunit_suites is still pointing to the original address that was set when looking up the .kunit_test_suites section of the module, then the loading phase has failed and there's no memory to be freed.

v4:
- rebased on 6.8
- noted that kunit_filter_suites() must return a virtual address v3:
- add a comment to clarify why the start address is checked v2:
- add include <linux/mm.h>

Quoted 7 lines
Fixes 2810c1e99867 ("kunit: Fix wild-memory-access bug in kunit_free_suite_set()")

---

Thanks very much.

Cheers,
-- David

Tested-by on v4 1/1
#2 lore raw
In reply to Marco Pagani

Hi Marco,

Quoted 49 lines · Marco Pagani

Commit 2810c1e99867 ("kunit: Fix wild-memory-access bug in kunit_free_suite_set()") fixed a wild-memory-access bug that could have happened during the loading phase of test suites built and executed as loadable modules. However, it also introduced a problematic side effect that causes test suites modules to crash when they attempt to register fake devices.

When a module is loaded, it traverses the MODULE_STATE_UNFORMED and MODULE_STATE_COMING states before reaching the normal operating state MODULE_STATE_LIVE. Finally, when the module is removed, it moves to MODULE_STATE_GOING before being released. However, if the loading function load_module() fails between complete_formation() and do_init_module(), the module goes directly from MODULE_STATE_COMING to MODULE_STATE_GOING without passing through MODULE_STATE_LIVE.

This behavior was causing kunit_module_exit() to be called without having first executed kunit_module_init(). Since kunit_module_exit() is responsible for freeing the memory allocated by kunit_module_init() through kunit_filter_suites(), this behavior was resulting in a wild-memory-access bug.

Commit 2810c1e99867 ("kunit: Fix wild-memory-access bug in kunit_free_suite_set()") fixed this issue by running the tests when the module is still in MODULE_STATE_COMING. However, modules in that state are not fully initialized, lacking sysfs kobjects. Therefore, if a test module attempts to register a fake device, it will inevitably crash.

This patch proposes a different approach to fix the original wild-memory-access bug while restoring the normal module execution flow by making kunit_module_exit() able to detect if kunit_module_init() has previously initialized the tests suite set. In this way, test modules can once again register fake devices without crashing.

This behavior is achieved by checking whether mod->kunit_suites is a virtual or direct mapping address. If it is a virtual address, then kunit_module_init() has allocated the suite_set in kunit_filter_suites() using kmalloc_array(). On the contrary, if mod->kunit_suites is still pointing to the original address that was set when looking up the kunit_test_suites section of the module, then the loading phase has failed and there's no memory to be freed.

v4:
- rebased on 6.8
- noted that kunit_filter_suites() must return a virtual address v3:
- add a comment to clarify why the start address is checked v2:
- add include <linux/mm.h>

Quoted 6 lines
Fixes 2810c1e99867 ("kunit: Fix wild-memory-access bug in kunit_free_suite_set()")

Thank you, this fixes the crashes I was seeing when running platform_device_test, and which I bisected to the commit in the Fixes tag.

Gr{oetje,eeting}s,

Geert

Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds