ARM: imx: Set stdio to serial on DH i.MX8M Plus DHCOM
PATCH 1/1 ARM: imx: Set stdio to serial on DH i.MX8M Plus DHCOM
In case CONSOLE_MUX and SYS_CONSOLE_IS_IN_ENV are enabled, the console stdin, stdout, stderr must be defined in environment. Define the default settings to fix the following warning on boot:
"
In: No input devices available! Out: No output devices available! Err: No error devices available!
"
Sort the default environment as well.
Signed-off-by Marek Vasut <[email protected]>
---
Cc: "NXP i.MX U-Boot Team" <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: [email protected]
--- include/configs/imx8mp_dhcom_pdk2.h | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-)
include/configs/imx8mp_dhcom_pdk2.h +10 -7
@@ -28,15 +28,9 @@#define CFG_SYS_FSL_USDHC_NUM 2#define CFG_SYS_FSL_ESDHC_ADDR 0 -#define CFG_EXTRA_ENV_SETTINGS \ +#define CFG_EXTRA_ENV_SETTINGS \ "altbootcmd=run bootcmd ; reset\0" \ "bootlimit=3\0" \ - "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ - "pxefile_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ - "ramdisk_addr_r=0x58000000\0" \ - "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ -/* Give slow devices beyond USB HUB chance to come up. */ \ -"usb_pgood_delay=2000\0" \ "dfu_alt_info=" \/* RAM block at DRAM offset 256..768 MiB */ \"ram ram0=ram ram 0x50000000 0x20000000&" \
@@ -68,6 +62,15 @@"dh_update_emmc_to_sf=" \"load mmc 1:1 ${loadaddr} boot/flash.bin && " \"run dh_update_sf_gen_fcfb dh_update_sf_write_data\0" \ + "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ + "pxefile_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ +"ramdisk_addr_r=0x58000000\0" \ + "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ +"stdin=serial\0" \ +"stdout=serial\0" \ +"stderr=serial\0" \ +/* Give slow devices beyond USB HUB chance to come up. */ \ +"usb_pgood_delay=2000\0" \BOOTENV #define BOOT_TARGET_DEVICES(func) \
Signature · 1 line
2.43.0
Quoted 6 lines · Marek Vasut
In case
CONSOLE_MUXandSYS_CONSOLE_IS_IN_ENVare enabled, the console stdin, stdout, stderr must be defined in environment. Define the default settings to fix the following warning on boot:"
Quoted 8 lines
In: No input devices available! Out: No output devices available! Err: No error devices available!"
Sort the default environment as well.
Signed-off-by Marek Vasut <[email protected]>
Applied, thanks.