Skip to contentSkip to conversation

s390/vfio-ap: reset queues removed from guest's AP configuration

PATCH In review Tony Krowiak 2 participants 17 messages Jan 15, 2024 – Jan 17, 2024

Subsystems (5)
Stable branch KVM s390 s390 zcrypt and pkey driver and AP bus +1 more subsystems
lore
Share & tools
lore

Tony Krowiak

author maintainer
#0 lore raw

v4 cover s390/vfio-ap: reset queues removed from guest's AP configuration

All queues removed from a guest's AP configuration must be reset so when they are subsequently made available again to a guest, they re-appear in a reset state. There are some scenarios where this is not the case. For example, if a queue device that is passed through to a guest is unbound from the vfio_ap device driver, the adapter to which the queue is attached will be removed from the guest's AP configuration. Doing so implicitly removes all queues associated with that adapter because the AP architecture precludes removing a single queue. Those queues also need to be reset.

This patch series ensures that all queues removed from a guest's AP configuration are reset for all possible scenarios.

Changelog v1=> v2:
-----------------
* Fixed CHECKPATCH errors

* Added line between description and Acked-by in patch 5/6

Tony Krowiak (6):
s390/vfio-ap: always filter entire AP matrix
s390/vfio-ap: loop over the shadow APCB when filtering guest's AP
configuration
s390/vfio-ap: let 'on_scan_complete' callback filter matrix and update
guest's APCB
s390/vfio-ap: reset queues filtered from the guest's AP config s390/vfio-ap: reset queues associated with adapter for queue unbound
from driver
s390/vfio-ap: do not reset queue removed from host config

 drivers/s390/crypto/vfio_ap_ops.c     | 268 +++++++++++++++++---------
 drivers/s390/crypto/vfio_ap_private.h |  11 +-
 2 files changed, 184 insertions(+), 95 deletions(-)
Signature · 1 line
2.43.0
author maintainer
#1 lore raw

PATCH v4 1/6 s390/vfio-ap: always filter entire AP matrix

From: Tony Krowiak <[email protected]>

The vfio_ap_mdev_filter_matrix function is called whenever a new adapter or domain is assigned to the mdev. The purpose of the function is to update the guest's AP configuration by filtering the matrix of adapters and domains assigned to the mdev. When an adapter or domain is assigned, only the APQNs associated with the APID of the new adapter or APQI of the new domain are inspected. If an APQN does not reference a queue device bound to the vfio_ap device driver, then it's APID will be filtered from the mdev's matrix when updating the guest's AP configuration.

Inspecting only the APID of the new adapter or APQI of the new domain will result in passing AP queues through to a guest that are not bound to the vfio_ap device driver under certain circumstances. Consider the following:

guest's AP configuration (all also assigned to the mdev's matrix):
14.0004
14.0005
14.0006
16.0004
16.0005
16.0006

unassign domain 4
unbind queue 16.0005
assign domain 4

When domain 4 is re-assigned, since only domain 4 will be inspected, the APQNs that will be examined will be:
14.0004
16.0004

Since both of those APQNs reference queue devices that are bound to the vfio_ap device driver, nothing will get filtered from the mdev's matrix when updating the guest's AP configuration. Consequently, queue 16.0005 will get passed through despite not being bound to the driver. This violates the linux device model requirement that a guest shall only be given access to devices bound to the device driver facilitating their pass-through.

To resolve this problem, every adapter and domain assigned to the mdev will be inspected when filtering the mdev's matrix.

Signed-off-by Tony Krowiak <[email protected]>
Acked-by Halil Pasic <[email protected]>
Fixes 48cae940c31d ("s390/vfio-ap: refresh guest's APCB by filtering AP resources assigned to mdev")
Cc <[email protected]>
---
 drivers/s390/crypto/vfio_ap_ops.c | 57 +++++++++----------------------
 1 file changed, 17 insertions(+), 40 deletions(-)
drivers/s390/crypto/vfio_ap_ops.c +17 -40
index acb710d3d7bc..1f7a6c106786 100644
@@ -674,8 +674,7 @@ static bool vfio_ap_mdev_filter_cdoms(struct ap_matrix_mdev *matrix_mdev)
  * Return: a boolean value indicating whether the KVM guest's APCB was changed
  *	   by the filtering or not.
  */
-static bool vfio_ap_mdev_filter_matrix(unsigned long *apm, unsigned long *aqm,
-				       struct ap_matrix_mdev *matrix_mdev)
+static bool vfio_ap_mdev_filter_matrix(struct ap_matrix_mdev *matrix_mdev)
 {
 	unsigned long apid, apqi, apqn;
 	DECLARE_BITMAP(prev_shadow_apm, AP_DEVICES);

@@ -696,8 +695,8 @@ static bool vfio_ap_mdev_filter_matrix(unsigned long *apm, unsigned long *aqm,
 	bitmap_and(matrix_mdev->shadow_apcb.aqm, matrix_mdev->matrix.aqm,
 		   (unsigned long *)matrix_dev->info.aqm, AP_DOMAINS);
 
-	for_each_set_bit_inv(apid, apm, AP_DEVICES) {
-		for_each_set_bit_inv(apqi, aqm, AP_DOMAINS) {
+	for_each_set_bit_inv(apid, matrix_mdev->matrix.apm, AP_DEVICES) {
+		for_each_set_bit_inv(apqi, matrix_mdev->matrix.aqm, AP_DOMAINS) {
 			/*
 			 * If the APQN is not bound to the vfio_ap device
 			 * driver, then we can't assign it to the guest's

@@ -962,7 +961,6 @@ static ssize_t assign_adapter_store(struct device *dev,
 {
 	int ret;
 	unsigned long apid;
-	DECLARE_BITMAP(apm_delta, AP_DEVICES);
 	struct ap_matrix_mdev *matrix_mdev = dev_get_drvdata(dev);
 
 	mutex_lock(&ap_perms_mutex);

@@ -991,11 +989,8 @@ static ssize_t assign_adapter_store(struct device *dev,
 	}
 
 	vfio_ap_mdev_link_adapter(matrix_mdev, apid);
-	memset(apm_delta, 0, sizeof(apm_delta));
-	set_bit_inv(apid, apm_delta);
 
-	if (vfio_ap_mdev_filter_matrix(apm_delta,
-				       matrix_mdev->matrix.aqm, matrix_mdev))
+	if (vfio_ap_mdev_filter_matrix(matrix_mdev))
 		vfio_ap_mdev_update_guest_apcb(matrix_mdev);
 
 	ret = count;

@@ -1171,7 +1166,6 @@ static ssize_t assign_domain_store(struct device *dev,
 {
 	int ret;
 	unsigned long apqi;
-	DECLARE_BITMAP(aqm_delta, AP_DOMAINS);
 	struct ap_matrix_mdev *matrix_mdev = dev_get_drvdata(dev);
 
 	mutex_lock(&ap_perms_mutex);

@@ -1200,11 +1194,8 @@ static ssize_t assign_domain_store(struct device *dev,
 	}
 
 	vfio_ap_mdev_link_domain(matrix_mdev, apqi);
-	memset(aqm_delta, 0, sizeof(aqm_delta));
-	set_bit_inv(apqi, aqm_delta);
 
-	if (vfio_ap_mdev_filter_matrix(matrix_mdev->matrix.apm, aqm_delta,
-				       matrix_mdev))
+	if (vfio_ap_mdev_filter_matrix(matrix_mdev))
 		vfio_ap_mdev_update_guest_apcb(matrix_mdev);
 
 	ret = count;

@@ -2109,9 +2100,7 @@ int vfio_ap_mdev_probe_queue(struct ap_device *apdev)
 	if (matrix_mdev) {
 		vfio_ap_mdev_link_queue(matrix_mdev, q);
 
-		if (vfio_ap_mdev_filter_matrix(matrix_mdev->matrix.apm,
-					       matrix_mdev->matrix.aqm,
-					       matrix_mdev))
+		if (vfio_ap_mdev_filter_matrix(matrix_mdev))
 			vfio_ap_mdev_update_guest_apcb(matrix_mdev);
 	}
 	dev_set_drvdata(&apdev->device, q);

@@ -2461,34 +2450,22 @@ void vfio_ap_on_cfg_changed(struct ap_config_info *cur_cfg_info,
 
 static void vfio_ap_mdev_hot_plug_cfg(struct ap_matrix_mdev *matrix_mdev)
 {
-	bool do_hotplug = false;
-	int filter_domains = 0;
-	int filter_adapters = 0;
-	DECLARE_BITMAP(apm, AP_DEVICES);
-	DECLARE_BITMAP(aqm, AP_DOMAINS);
+	bool filter_domains, filter_adapters, filter_cdoms, do_hotplug = false;
 
 	mutex_lock(&matrix_mdev->kvm->lock);
 	mutex_lock(&matrix_dev->mdevs_lock);
 
-	filter_adapters = bitmap_and(apm, matrix_mdev->matrix.apm,
-				     matrix_mdev->apm_add, AP_DEVICES);
-	filter_domains = bitmap_and(aqm, matrix_mdev->matrix.aqm,
-				    matrix_mdev->aqm_add, AP_DOMAINS);
-
-	if (filter_adapters && filter_domains)
-		do_hotplug |= vfio_ap_mdev_filter_matrix(apm, aqm, matrix_mdev);
-	else if (filter_adapters)
-		do_hotplug |=
-			vfio_ap_mdev_filter_matrix(apm,
-						   matrix_mdev->shadow_apcb.aqm,
-						   matrix_mdev);
-	else
-		do_hotplug |=
-			vfio_ap_mdev_filter_matrix(matrix_mdev->shadow_apcb.apm,
-						   aqm, matrix_mdev);
+	filter_adapters = bitmap_intersects(matrix_mdev->matrix.apm,
+					    matrix_mdev->apm_add, AP_DEVICES);
+	filter_domains = bitmap_intersects(matrix_mdev->matrix.aqm,
+					   matrix_mdev->aqm_add, AP_DOMAINS);
+	filter_cdoms = bitmap_intersects(matrix_mdev->matrix.adm,
+					 matrix_mdev->adm_add, AP_DOMAINS);
+
+	if (filter_adapters || filter_domains)
+		do_hotplug = vfio_ap_mdev_filter_matrix(matrix_mdev);
 
-	if (bitmap_intersects(matrix_mdev->matrix.adm, matrix_mdev->adm_add,
-			      AP_DOMAINS))
+	if (filter_cdoms)
 		do_hotplug |= vfio_ap_mdev_filter_cdoms(matrix_mdev);
 
 	if (do_hotplug)
Signature · 1 line
2.43.0
author maintainer
#2 lore raw

PATCH v4 2/6 s390/vfio-ap: loop over the shadow APCB when filtering guest's AP configuration

In reply to Tony Krowiak

From: Tony Krowiak <[email protected]>

While filtering the mdev matrix, it doesn't make sense - and will have unexpected results - to filter an APID from the matrix if the APID or one of the associated APQIs is not in the host's AP configuration. There are two reasons for this:

1. An adapter or domain that is not in the host's AP configuration can be assigned to the matrix; this is known as over-provisioning. Queue devices, however, are only created for adapters and domains in the host's AP configuration, so there will be no queues associated with an over-provisioned adapter or domain to filter.

2. The adapter or domain may have been externally removed from the host's configuration via an SE or HMC attached to a DPM enabled LPAR. In this case, the vfio_ap device driver would have been notified by the AP bus via the on_config_changed callback and the adapter or domain would have already been filtered.

Since the matrix_mdev->shadow_apcb.apm and matrix_mdev->shadow_apcb.aqm are copied from the mdev matrix sans the APIDs and APQIs not in the host's AP configuration, let's loop over those bitmaps instead of those assigned to the matrix.

Signed-off-by Tony Krowiak <[email protected]>
Reviewed-by Halil Pasic <[email protected]>
Fixes 48cae940c31d ("s390/vfio-ap: refresh guest's APCB by filtering AP resources assigned to mdev")
Cc <[email protected]>
---
 drivers/s390/crypto/vfio_ap_ops.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/s390/crypto/vfio_ap_ops.c +3 -2
index 1f7a6c106786..e825e13847fe 100644
@@ -695,8 +695,9 @@ static bool vfio_ap_mdev_filter_matrix(struct ap_matrix_mdev *matrix_mdev)
 	bitmap_and(matrix_mdev->shadow_apcb.aqm, matrix_mdev->matrix.aqm,
 		   (unsigned long *)matrix_dev->info.aqm, AP_DOMAINS);
 
-	for_each_set_bit_inv(apid, matrix_mdev->matrix.apm, AP_DEVICES) {
-		for_each_set_bit_inv(apqi, matrix_mdev->matrix.aqm, AP_DOMAINS) {
+	for_each_set_bit_inv(apid, matrix_mdev->shadow_apcb.apm, AP_DEVICES) {
+		for_each_set_bit_inv(apqi, matrix_mdev->shadow_apcb.aqm,
+				     AP_DOMAINS) {
 			/*
 			 * If the APQN is not bound to the vfio_ap device
 			 * driver, then we can't assign it to the guest's
Signature · 1 line
2.43.0
author maintainer
#3 lore raw

PATCH v4 3/6 s390/vfio-ap: let 'on_scan_complete' callback filter matrix and update guest's APCB

In reply to Tony Krowiak

From: Tony Krowiak <[email protected]>

When adapters and/or domains are added to the host's AP configuration, this may result in multiple queue devices getting created and probed by the vfio_ap device driver. For each queue device probed, the matrix of adapters and domains assigned to a matrix mdev will be filtered to update the guest's APCB. If any adapters or domains get added to or removed from the APCB, the guest's AP configuration will be dynamically updated (i.e., hot plug/unplug). To dynamically update the guest's configuration, its VCPUs must be taken out of SIE for the period of time it takes to make the update. This is disruptive to the guest's operation and if there are many queues probed due to a change in the host's AP configuration, this could be troublesome. The problem is exacerbated by the fact that the 'on_scan_complete' callback also filters the mdev's matrix and updates the guest's AP configuration.

In order to reduce the potential amount of disruption to the guest that may result from a change to the host's AP configuration, let's bypass the filtering of the matrix and updating of the guest's AP configuration in the probe callback - if due to a host config change - and defer it until the 'on_scan_complete' callback is invoked after the AP bus finishes its device scan operation. This way the filtering and updating will be performed only once regardless of the number of queues added.

Signed-off-by Tony Krowiak <[email protected]>
Reviewed-by Halil Pasic <[email protected]>
---
 drivers/s390/crypto/vfio_ap_ops.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)
drivers/s390/crypto/vfio_ap_ops.c +13 -0
index e825e13847fe..e45d0bf7b126 100644
@@ -2101,9 +2101,22 @@ int vfio_ap_mdev_probe_queue(struct ap_device *apdev)
 	if (matrix_mdev) {
 		vfio_ap_mdev_link_queue(matrix_mdev, q);
 
+		/*
+		 * If we're in the process of handling the adding of adapters or
+		 * domains to the host's AP configuration, then let the
+		 * vfio_ap device driver's on_scan_complete callback filter the
+		 * matrix and update the guest's AP configuration after all of
+		 * the new queue devices are probed.
+		 */
+		if (!bitmap_empty(matrix_mdev->apm_add, AP_DEVICES) ||
+		    !bitmap_empty(matrix_mdev->aqm_add, AP_DOMAINS))
+			goto done;
+
 		if (vfio_ap_mdev_filter_matrix(matrix_mdev))
 			vfio_ap_mdev_update_guest_apcb(matrix_mdev);
 	}
+
+done:
 	dev_set_drvdata(&apdev->device, q);
 	release_update_locks_for_mdev(matrix_mdev);
Signature · 1 line
2.43.0
author maintainer
#5 lore raw

Re: [PATCH v4 3/6] s390/vfio-ap: let 'on_scan_complete' callback filter matrix and update guest's APCB

Quoted 6 lines · Alexander Gordeev

On Mon, Jan 15, 2024 at 01:54:33PM -0500, Tony Krowiak wrote:
Hi Tony,

Quoted 2 lines
Signed-off-by Tony Krowiak <[email protected]>
Reviewed-by Halil Pasic <[email protected]>

No Fixes tag for this patch?

This patch is more of an enhancement as opposed to a bug, so no Fixes.

Quoted 3 lines

Thanks!

maintainer
#6 lore raw

Re: [PATCH v4 3/6] s390/vfio-ap: let 'on_scan_complete' callback filter matrix and update guest's APCB

Quoted 1 line · Tony Krowiak

This patch is more of an enhancement as opposed to a bug, so no Fixes.

The preceding and rest of this series CCs [email protected] and would not apply without this patch. So I guess backporting the whole series would be difficult.

Whether propagating the prevous patches' Fixes/stable makes any sense?

Thanks!

author maintainer
#7 lore raw

Re: [PATCH v4 3/6] s390/vfio-ap: let 'on_scan_complete' callback filter matrix and update guest's APCB

Quoted 7 lines · Alexander Gordeev
Quoted 1 line · Tony Krowiak

This patch is more of an enhancement as opposed to a bug, so no Fixes.

The preceding and rest of this series CCs [email protected] and would not apply without this patch. So I guess backporting the whole series would be difficult.

Whether propagating the prevous patches' Fixes/stable makes any sense?

Let's put it this way; it doesn't not make sense to make this patch Fixes/stable. To make life easier to apply the whole series, go ahead and add the Fixes/stable tags.

Quoted 2 lines

Thanks!

author maintainer
#8 lore raw

PATCH v4 4/6 s390/vfio-ap: reset queues filtered from the guest's AP config

In reply to Tony Krowiak

From: Tony Krowiak <[email protected]>

When filtering the adapters from the configuration profile for a guest to create or update a guest's AP configuration, if the APID of an adapter and the APQI of a domain identify a queue device that is not bound to the vfio_ap device driver, the APID of the adapter will be filtered because an individual APQN can not be filtered due to the fact the APQNs are assigned to an AP configuration as a matrix of APIDs and APQIs. Consequently, a guest will not have access to all of the queues associated with the filtered adapter. If the queues are subsequently made available again to the guest, they should re-appear in a reset state; so, let's make sure all queues associated with an adapter unplugged from the guest are reset.

In order to identify the set of queues that need to be reset, let's allow a vfio_ap_queue object to be simultaneously stored in both a hashtable and a
list: A hashtable used to store all of the queues assigned
to a matrix mdev; and/or, a list used to store a subset of the queues that need to be reset. For example, when an adapter is hot unplugged from a guest, all guest queues associated with that adapter must be reset. Since that may be a subset of those assigned to the matrix mdev, they can be stored in a list that can be passed to the vfio_ap_mdev_reset_queues function.

Signed-off-by Tony Krowiak <[email protected]>
Acked-by Halil Pasic <[email protected]>
Fixes 48cae940c31d ("s390/vfio-ap: refresh guest's APCB by filtering AP resources assigned to mdev")
Cc <[email protected]>
---
 drivers/s390/crypto/vfio_ap_ops.c     | 171 +++++++++++++++++++-------
 drivers/s390/crypto/vfio_ap_private.h |  11 +-
 2 files changed, 133 insertions(+), 49 deletions(-)
drivers/s390/crypto/vfio_ap_ops.c +126 -45
index e45d0bf7b126..44cd29aace8e 100644
@@ -32,7 +32,8 @@
 
 #define AP_RESET_INTERVAL		20	/* Reset sleep interval (20ms)		*/
 
-static int vfio_ap_mdev_reset_queues(struct ap_queue_table *qtable);
+static int vfio_ap_mdev_reset_queues(struct ap_matrix_mdev *matrix_mdev);
+static int vfio_ap_mdev_reset_qlist(struct list_head *qlist);
 static struct vfio_ap_queue *vfio_ap_find_queue(int apqn);
 static const struct vfio_device_ops vfio_ap_matrix_dev_ops;
 static void vfio_ap_mdev_reset_queue(struct vfio_ap_queue *q);

@@ -665,16 +666,23 @@ static bool vfio_ap_mdev_filter_cdoms(struct ap_matrix_mdev *matrix_mdev)
  *				device driver.
  *
  * @matrix_mdev: the matrix mdev whose matrix is to be filtered.
+ * @apm_filtered: a 256-bit bitmap for storing the APIDs filtered from the
+ *		  guest's AP configuration that are still in the host's AP
+ *		  configuration.
  *
  * Note: If an APQN referencing a queue device that is not bound to the vfio_ap
  *	 driver, its APID will be filtered from the guest's APCB. The matrix
  *	 structure precludes filtering an individual APQN, so its APID will be
- *	 filtered.
+ *	 filtered. Consequently, all queues associated with the adapter that
+ *	 are in the host's AP configuration must be reset. If queues are
+ *	 subsequently made available again to the guest, they should re-appear
+ *	 in a reset state
  *
  * Return: a boolean value indicating whether the KVM guest's APCB was changed
  *	   by the filtering or not.
  */
-static bool vfio_ap_mdev_filter_matrix(struct ap_matrix_mdev *matrix_mdev)
+static bool vfio_ap_mdev_filter_matrix(struct ap_matrix_mdev *matrix_mdev,
+				       unsigned long *apm_filtered)
 {
 	unsigned long apid, apqi, apqn;
 	DECLARE_BITMAP(prev_shadow_apm, AP_DEVICES);

@@ -684,6 +692,7 @@ static bool vfio_ap_mdev_filter_matrix(struct ap_matrix_mdev *matrix_mdev)
 	bitmap_copy(prev_shadow_apm, matrix_mdev->shadow_apcb.apm, AP_DEVICES);
 	bitmap_copy(prev_shadow_aqm, matrix_mdev->shadow_apcb.aqm, AP_DOMAINS);
 	vfio_ap_matrix_init(&matrix_dev->info, &matrix_mdev->shadow_apcb);
+	bitmap_clear(apm_filtered, 0, AP_DEVICES);
 
 	/*
 	 * Copy the adapters, domains and control domains to the shadow_apcb

@@ -709,8 +718,16 @@ static bool vfio_ap_mdev_filter_matrix(struct ap_matrix_mdev *matrix_mdev)
 			apqn = AP_MKQID(apid, apqi);
 			q = vfio_ap_mdev_get_queue(matrix_mdev, apqn);
 			if (!q || q->reset_status.response_code) {
-				clear_bit_inv(apid,
-					      matrix_mdev->shadow_apcb.apm);
+				clear_bit_inv(apid, matrix_mdev->shadow_apcb.apm);
+
+				/*
+				 * If the adapter was previously plugged into
+				 * the guest, let's let the caller know that
+				 * the APID was filtered.
+				 */
+				if (test_bit_inv(apid, prev_shadow_apm))
+					set_bit_inv(apid, apm_filtered);
+
 				break;
 			}
 		}

@@ -812,7 +829,7 @@ static void vfio_ap_mdev_remove(struct mdev_device *mdev)
 
 	mutex_lock(&matrix_dev->guests_lock);
 	mutex_lock(&matrix_dev->mdevs_lock);
-	vfio_ap_mdev_reset_queues(&matrix_mdev->qtable);
+	vfio_ap_mdev_reset_queues(matrix_mdev);
 	vfio_ap_mdev_unlink_fr_queues(matrix_mdev);
 	list_del(&matrix_mdev->node);
 	mutex_unlock(&matrix_dev->mdevs_lock);

@@ -922,6 +939,47 @@ static void vfio_ap_mdev_link_adapter(struct ap_matrix_mdev *matrix_mdev,
 				       AP_MKQID(apid, apqi));
 }
 
+static int reset_queues_for_apids(struct ap_matrix_mdev *matrix_mdev,
+				  unsigned long *apm_reset)
+{
+	struct vfio_ap_queue *q, *tmpq;
+	struct list_head qlist;
+	unsigned long apid, apqi;
+	int apqn, ret = 0;
+
+	if (bitmap_empty(apm_reset, AP_DEVICES))
+		return 0;
+
+	INIT_LIST_HEAD(&qlist);
+
+	for_each_set_bit_inv(apid, apm_reset, AP_DEVICES) {
+		for_each_set_bit_inv(apqi, matrix_mdev->shadow_apcb.aqm,
+				     AP_DOMAINS) {
+			/*
+			 * If the domain is not in the host's AP configuration,
+			 * then resetting it will fail with response code 01
+			 * (APQN not valid).
+			 */
+			if (!test_bit_inv(apqi,
+					  (unsigned long *)matrix_dev->info.aqm))
+				continue;
+
+			apqn = AP_MKQID(apid, apqi);
+			q = vfio_ap_mdev_get_queue(matrix_mdev, apqn);
+
+			if (q)
+				list_add_tail(&q->reset_qnode, &qlist);
+		}
+	}
+
+	ret = vfio_ap_mdev_reset_qlist(&qlist);
+
+	list_for_each_entry_safe(q, tmpq, &qlist, reset_qnode)
+		list_del(&q->reset_qnode);
+
+	return ret;
+}
+
 /**
  * assign_adapter_store - parses the APID from @buf and sets the
  * corresponding bit in the mediated matrix device's APM

@@ -962,6 +1020,7 @@ static ssize_t assign_adapter_store(struct device *dev,
 {
 	int ret;
 	unsigned long apid;
+	DECLARE_BITMAP(apm_filtered, AP_DEVICES);
 	struct ap_matrix_mdev *matrix_mdev = dev_get_drvdata(dev);
 
 	mutex_lock(&ap_perms_mutex);

@@ -991,8 +1050,10 @@ static ssize_t assign_adapter_store(struct device *dev,
 
 	vfio_ap_mdev_link_adapter(matrix_mdev, apid);
 
-	if (vfio_ap_mdev_filter_matrix(matrix_mdev))
+	if (vfio_ap_mdev_filter_matrix(matrix_mdev, apm_filtered)) {
 		vfio_ap_mdev_update_guest_apcb(matrix_mdev);
+		reset_queues_for_apids(matrix_mdev, apm_filtered);
+	}
 
 	ret = count;
 done:

@@ -1023,11 +1084,12 @@ static struct vfio_ap_queue
  *				 adapter was assigned.
  * @matrix_mdev: the matrix mediated device to which the adapter was assigned.
  * @apid: the APID of the unassigned adapter.
- * @qtable: table for storing queues associated with unassigned adapter.
+ * @qlist: list for storing queues associated with unassigned adapter that
+ *	   need to be reset.
  */
 static void vfio_ap_mdev_unlink_adapter(struct ap_matrix_mdev *matrix_mdev,
 					unsigned long apid,
-					struct ap_queue_table *qtable)
+					struct list_head *qlist)
 {
 	unsigned long apqi;
 	struct vfio_ap_queue *q;

@@ -1035,11 +1097,10 @@ static void vfio_ap_mdev_unlink_adapter(struct ap_matrix_mdev *matrix_mdev,
 	for_each_set_bit_inv(apqi, matrix_mdev->matrix.aqm, AP_DOMAINS) {
 		q = vfio_ap_unlink_apqn_fr_mdev(matrix_mdev, apid, apqi);
 
-		if (q && qtable) {
+		if (q && qlist) {
 			if (test_bit_inv(apid, matrix_mdev->shadow_apcb.apm) &&
 			    test_bit_inv(apqi, matrix_mdev->shadow_apcb.aqm))
-				hash_add(qtable->queues, &q->mdev_qnode,
-					 q->apqn);
+				list_add_tail(&q->reset_qnode, qlist);
 		}
 	}
 }

@@ -1047,26 +1108,23 @@ static void vfio_ap_mdev_unlink_adapter(struct ap_matrix_mdev *matrix_mdev,
 static void vfio_ap_mdev_hot_unplug_adapter(struct ap_matrix_mdev *matrix_mdev,
 					    unsigned long apid)
 {
-	int loop_cursor;
-	struct vfio_ap_queue *q;
-	struct ap_queue_table *qtable = kzalloc(sizeof(*qtable), GFP_KERNEL);
+	struct vfio_ap_queue *q, *tmpq;
+	struct list_head qlist;
 
-	hash_init(qtable->queues);
-	vfio_ap_mdev_unlink_adapter(matrix_mdev, apid, qtable);
+	INIT_LIST_HEAD(&qlist);
+	vfio_ap_mdev_unlink_adapter(matrix_mdev, apid, &qlist);
 
 	if (test_bit_inv(apid, matrix_mdev->shadow_apcb.apm)) {
 		clear_bit_inv(apid, matrix_mdev->shadow_apcb.apm);
 		vfio_ap_mdev_update_guest_apcb(matrix_mdev);
 	}
 
-	vfio_ap_mdev_reset_queues(qtable);
+	vfio_ap_mdev_reset_qlist(&qlist);
 
-	hash_for_each(qtable->queues, loop_cursor, q, mdev_qnode) {
+	list_for_each_entry_safe(q, tmpq, &qlist, reset_qnode) {
 		vfio_ap_unlink_mdev_fr_queue(q);
-		hash_del(&q->mdev_qnode);
+		list_del(&q->reset_qnode);
 	}
-
-	kfree(qtable);
 }
 
 /**

@@ -1167,6 +1225,7 @@ static ssize_t assign_domain_store(struct device *dev,
 {
 	int ret;
 	unsigned long apqi;
+	DECLARE_BITMAP(apm_filtered, AP_DEVICES);
 	struct ap_matrix_mdev *matrix_mdev = dev_get_drvdata(dev);
 
 	mutex_lock(&ap_perms_mutex);

@@ -1196,8 +1255,10 @@ static ssize_t assign_domain_store(struct device *dev,
 
 	vfio_ap_mdev_link_domain(matrix_mdev, apqi);
 
-	if (vfio_ap_mdev_filter_matrix(matrix_mdev))
+	if (vfio_ap_mdev_filter_matrix(matrix_mdev, apm_filtered)) {
 		vfio_ap_mdev_update_guest_apcb(matrix_mdev);
+		reset_queues_for_apids(matrix_mdev, apm_filtered);
+	}
 
 	ret = count;
 done:

@@ -1210,7 +1271,7 @@ static DEVICE_ATTR_WO(assign_domain);
 
 static void vfio_ap_mdev_unlink_domain(struct ap_matrix_mdev *matrix_mdev,
 				       unsigned long apqi,
-				       struct ap_queue_table *qtable)
+				       struct list_head *qlist)
 {
 	unsigned long apid;
 	struct vfio_ap_queue *q;

@@ -1218,11 +1279,10 @@ static void vfio_ap_mdev_unlink_domain(struct ap_matrix_mdev *matrix_mdev,
 	for_each_set_bit_inv(apid, matrix_mdev->matrix.apm, AP_DEVICES) {
 		q = vfio_ap_unlink_apqn_fr_mdev(matrix_mdev, apid, apqi);
 
-		if (q && qtable) {
+		if (q && qlist) {
 			if (test_bit_inv(apid, matrix_mdev->shadow_apcb.apm) &&
 			    test_bit_inv(apqi, matrix_mdev->shadow_apcb.aqm))
-				hash_add(qtable->queues, &q->mdev_qnode,
-					 q->apqn);
+				list_add_tail(&q->reset_qnode, qlist);
 		}
 	}
 }

@@ -1230,26 +1290,23 @@ static void vfio_ap_mdev_unlink_domain(struct ap_matrix_mdev *matrix_mdev,
 static void vfio_ap_mdev_hot_unplug_domain(struct ap_matrix_mdev *matrix_mdev,
 					   unsigned long apqi)
 {
-	int loop_cursor;
-	struct vfio_ap_queue *q;
-	struct ap_queue_table *qtable = kzalloc(sizeof(*qtable), GFP_KERNEL);
+	struct vfio_ap_queue *q, *tmpq;
+	struct list_head qlist;
 
-	hash_init(qtable->queues);
-	vfio_ap_mdev_unlink_domain(matrix_mdev, apqi, qtable);
+	INIT_LIST_HEAD(&qlist);
+	vfio_ap_mdev_unlink_domain(matrix_mdev, apqi, &qlist);
 
 	if (test_bit_inv(apqi, matrix_mdev->shadow_apcb.aqm)) {
 		clear_bit_inv(apqi, matrix_mdev->shadow_apcb.aqm);
 		vfio_ap_mdev_update_guest_apcb(matrix_mdev);
 	}
 
-	vfio_ap_mdev_reset_queues(qtable);
+	vfio_ap_mdev_reset_qlist(&qlist);
 
-	hash_for_each(qtable->queues, loop_cursor, q, mdev_qnode) {
+	list_for_each_entry_safe(q, tmpq, &qlist, reset_qnode) {
 		vfio_ap_unlink_mdev_fr_queue(q);
-		hash_del(&q->mdev_qnode);
+		list_del(&q->reset_qnode);
 	}
-
-	kfree(qtable);
 }
 
 /**

@@ -1604,7 +1661,7 @@ static void vfio_ap_mdev_unset_kvm(struct ap_matrix_mdev *matrix_mdev)
 		get_update_locks_for_kvm(kvm);
 
 		kvm_arch_crypto_clear_masks(kvm);
-		vfio_ap_mdev_reset_queues(&matrix_mdev->qtable);
+		vfio_ap_mdev_reset_queues(matrix_mdev);
 		kvm_put_kvm(kvm);
 		matrix_mdev->kvm = NULL;
 

@@ -1740,15 +1797,33 @@ static void vfio_ap_mdev_reset_queue(struct vfio_ap_queue *q)
 	}
 }
 
-static int vfio_ap_mdev_reset_queues(struct ap_queue_table *qtable)
+static int vfio_ap_mdev_reset_queues(struct ap_matrix_mdev *matrix_mdev)
 {
 	int ret = 0, loop_cursor;
 	struct vfio_ap_queue *q;
 
-	hash_for_each(qtable->queues, loop_cursor, q, mdev_qnode)
+	hash_for_each(matrix_mdev->qtable.queues, loop_cursor, q, mdev_qnode)
 		vfio_ap_mdev_reset_queue(q);
 
-	hash_for_each(qtable->queues, loop_cursor, q, mdev_qnode) {
+	hash_for_each(matrix_mdev->qtable.queues, loop_cursor, q, mdev_qnode) {
+		flush_work(&q->reset_work);
+
+		if (q->reset_status.response_code)
+			ret = -EIO;
+	}
+
+	return ret;
+}
+
+static int vfio_ap_mdev_reset_qlist(struct list_head *qlist)
+{
+	int ret = 0;
+	struct vfio_ap_queue *q;
+
+	list_for_each_entry(q, qlist, reset_qnode)
+		vfio_ap_mdev_reset_queue(q);
+
+	list_for_each_entry(q, qlist, reset_qnode) {
 		flush_work(&q->reset_work);
 
 		if (q->reset_status.response_code)

@@ -1934,7 +2009,7 @@ static ssize_t vfio_ap_mdev_ioctl(struct vfio_device *vdev,
 		ret = vfio_ap_mdev_get_device_info(arg);
 		break;
 	case VFIO_DEVICE_RESET:
-		ret = vfio_ap_mdev_reset_queues(&matrix_mdev->qtable);
+		ret = vfio_ap_mdev_reset_queues(matrix_mdev);
 		break;
 	case VFIO_DEVICE_GET_IRQ_INFO:
 			ret = vfio_ap_get_irq_info(arg);

@@ -2080,6 +2155,7 @@ int vfio_ap_mdev_probe_queue(struct ap_device *apdev)
 {
 	int ret;
 	struct vfio_ap_queue *q;
+	DECLARE_BITMAP(apm_filtered, AP_DEVICES);
 	struct ap_matrix_mdev *matrix_mdev;
 
 	ret = sysfs_create_group(&apdev->device.kobj, &vfio_queue_attr_group);

@@ -2112,15 +2188,17 @@ int vfio_ap_mdev_probe_queue(struct ap_device *apdev)
 		    !bitmap_empty(matrix_mdev->aqm_add, AP_DOMAINS))
 			goto done;
 
-		if (vfio_ap_mdev_filter_matrix(matrix_mdev))
+		if (vfio_ap_mdev_filter_matrix(matrix_mdev, apm_filtered)) {
 			vfio_ap_mdev_update_guest_apcb(matrix_mdev);
+			reset_queues_for_apids(matrix_mdev, apm_filtered);
+		}
 	}
 
 done:
 	dev_set_drvdata(&apdev->device, q);
 	release_update_locks_for_mdev(matrix_mdev);
 
-	return 0;
+	return ret;
 
 err_remove_group:
 	sysfs_remove_group(&apdev->device.kobj, &vfio_queue_attr_group);

@@ -2464,6 +2542,7 @@ void vfio_ap_on_cfg_changed(struct ap_config_info *cur_cfg_info,
 
 static void vfio_ap_mdev_hot_plug_cfg(struct ap_matrix_mdev *matrix_mdev)
 {
+	DECLARE_BITMAP(apm_filtered, AP_DEVICES);
 	bool filter_domains, filter_adapters, filter_cdoms, do_hotplug = false;
 
 	mutex_lock(&matrix_mdev->kvm->lock);

@@ -2477,7 +2556,7 @@ static void vfio_ap_mdev_hot_plug_cfg(struct ap_matrix_mdev *matrix_mdev)
 					 matrix_mdev->adm_add, AP_DOMAINS);
 
 	if (filter_adapters || filter_domains)
-		do_hotplug = vfio_ap_mdev_filter_matrix(matrix_mdev);
+		do_hotplug = vfio_ap_mdev_filter_matrix(matrix_mdev, apm_filtered);
 
 	if (filter_cdoms)
 		do_hotplug |= vfio_ap_mdev_filter_cdoms(matrix_mdev);

@@ -2485,6 +2564,8 @@ static void vfio_ap_mdev_hot_plug_cfg(struct ap_matrix_mdev *matrix_mdev)
 	if (do_hotplug)
 		vfio_ap_mdev_update_guest_apcb(matrix_mdev);
 
+	reset_queues_for_apids(matrix_mdev, apm_filtered);
+
 	mutex_unlock(&matrix_dev->mdevs_lock);
 	mutex_unlock(&matrix_mdev->kvm->lock);
 }
drivers/s390/crypto/vfio_ap_private.h +7 -4
index 88aff8b81f2f..20eac8b0f0b9 100644
@@ -83,10 +83,10 @@ struct ap_matrix {
 };
 
 /**
- * struct ap_queue_table - a table of queue objects.
- *
- * @queues: a hashtable of queues (struct vfio_ap_queue).
- */
+  * struct ap_queue_table - a table of queue objects.
+  *
+  * @queues: a hashtable of queues (struct vfio_ap_queue).
+  */
 struct ap_queue_table {
 	DECLARE_HASHTABLE(queues, 8);
 };

@@ -133,6 +133,8 @@ struct ap_matrix_mdev {
  * @apqn: the APQN of the AP queue device
  * @saved_isc: the guest ISC registered with the GIB interface
  * @mdev_qnode: allows the vfio_ap_queue struct to be added to a hashtable
+ * @reset_qnode: allows the vfio_ap_queue struct to be added to a list of queues
+ *		 that need to be reset
  * @reset_status: the status from the last reset of the queue
  * @reset_work: work to wait for queue reset to complete
  */

@@ -143,6 +145,7 @@ struct vfio_ap_queue {
 #define VFIO_AP_ISC_INVALID 0xff
 	unsigned char saved_isc;
 	struct hlist_node mdev_qnode;
+	struct list_head reset_qnode;
 	struct ap_queue_status reset_status;
 	struct work_struct reset_work;
 };
Signature · 1 line
2.43.0
maintainer
#9 lore raw

Re: [PATCH v4 4/6] s390/vfio-ap: reset queues filtered from the guest's AP config

Quoted 1 line · Tony Krowiak

From: Tony Krowiak <[email protected]>

...

Quoted 9 lines
drivers/s390/crypto/vfio_ap_private.h +0 -1
index 88aff8b81f2f..20eac8b0f0b9 100644
@@ -83,10 +83,10 @@ struct ap_matrix {
 };
 
 /**
- * struct ap_queue_table - a table of queue objects.

drivers/s390/crypto/vfio_ap_private.h struct ap_matrix { · line 92

Quoted 10 lines
drivers/s390/crypto/vfio_ap_private.h +4 -3
- *
- * @queues: a hashtable of queues (struct vfio_ap_queue).
- */
+  * struct ap_queue_table - a table of queue objects.
+  *
+  * @queues: a hashtable of queues (struct vfio_ap_queue).
+  */
 struct ap_queue_table {
 	DECLARE_HASHTABLE(queues, 8);
 };

If this change is intended?

author maintainer
#10 lore raw

Re: [PATCH v4 4/6] s390/vfio-ap: reset queues filtered from the guest's AP config

Quoted 10 lines · Alexander Gordeev
Quoted 1 line · Tony Krowiak

From: Tony Krowiak <[email protected]>

...

Quoted 7 lines
drivers/s390/crypto/vfio_ap_private.h +0 -0
index 88aff8b81f2f..20eac8b0f0b9 100644
@@ -83,10 +83,10 @@ struct ap_matrix {
  };
Quoted 13 lines

drivers/s390/crypto/vfio_ap_private.h struct ap_matrix { · line 92

Quoted 12 lines
drivers/s390/crypto/vfio_ap_private.h +4 -4
  /**
- * struct ap_queue_table - a table of queue objects.
- *
- * @queues: a hashtable of queues (struct vfio_ap_queue).
- */
+  * struct ap_queue_table - a table of queue objects.
+  *
+  * @queues: a hashtable of queues (struct vfio_ap_queue).
+  */
  struct ap_queue_table {
  	DECLARE_HASHTABLE(queues, 8);
  };

If this change is intended?

It makes not sense, not sure why/how it happened. Probably an artifact of the many rebases done to get to this version.

author maintainer
#11 lore raw

Re: [PATCH v4 4/6] s390/vfio-ap: reset queues filtered from the guest's AP config

In reply to Alexander Gordeev
Quoted 10 lines · Alexander Gordeev
Quoted 1 line · Tony Krowiak

From: Tony Krowiak <[email protected]>

...

Quoted 7 lines
drivers/s390/crypto/vfio_ap_private.h +0 -0
index 88aff8b81f2f..20eac8b0f0b9 100644
@@ -83,10 +83,10 @@ struct ap_matrix {
  };
Quoted 13 lines

drivers/s390/crypto/vfio_ap_private.h struct ap_matrix { · line 92

Quoted 12 lines
drivers/s390/crypto/vfio_ap_private.h +4 -4
  /**
- * struct ap_queue_table - a table of queue objects.
- *
- * @queues: a hashtable of queues (struct vfio_ap_queue).
- */
+  * struct ap_queue_table - a table of queue objects.
+  *
+  * @queues: a hashtable of queues (struct vfio_ap_queue).
+  */
  struct ap_queue_table {
  	DECLARE_HASHTABLE(queues, 8);
  };

If this change is intended?

Shall I fix this and submit a v5?

maintainer
#12 lore raw

Re: [PATCH v4 4/6] s390/vfio-ap: reset queues filtered from the guest's AP config

Quoted 2 lines · Anthony Krowiak
Quoted 1 line

If this change is intended?

Shall I fix this and submit a v5?

No, I will handle it.

author maintainer
#13 lore raw

Re: [PATCH v4 4/6] s390/vfio-ap: reset queues filtered from the guest's AP config

Quoted 4 lines · Alexander Gordeev
Quoted 2 lines · Anthony Krowiak
Quoted 1 line

If this change is intended?

Shall I fix this and submit a v5?

No, I will handle it.

Thanks Alex.

author maintainer
#14 lore raw

PATCH v4 5/6 s390/vfio-ap: reset queues associated with adapter for queue unbound from driver

In reply to Tony Krowiak

From: Tony Krowiak <[email protected]>

When a queue is unbound from the vfio_ap device driver, if that queue is assigned to a guest's AP configuration, its associated adapter is removed because queues are defined to a guest via a matrix of adapters and domains; so, it is not possible to remove a single queue.

If an adapter is removed from the guest's AP configuration, all associated queues must be reset to prevent leaking crypto data should any of them be assigned to a different guest or device driver. The one caveat is that if the queue is being removed because the adapter or domain has been removed from the host's AP configuration, then an attempt to reset the queue will fail with response code 01, AP-queue number not valid; so resetting these queues should be skipped.

Acked-by Halil Pasic <[email protected]>
Signed-off-by Tony Krowiak <[email protected]>
Fixes 09d31ff78793 ("s390/vfio-ap: hot plug/unplug of AP devices when probed/removed")
Cc <[email protected]>
---
 drivers/s390/crypto/vfio_ap_ops.c | 76 +++++++++++++++++--------------
 1 file changed, 41 insertions(+), 35 deletions(-)
drivers/s390/crypto/vfio_ap_ops.c +41 -35
index 44cd29aace8e..550c936c413d 100644
@@ -939,45 +939,45 @@ static void vfio_ap_mdev_link_adapter(struct ap_matrix_mdev *matrix_mdev,
 				       AP_MKQID(apid, apqi));
 }
 
+static void collect_queues_to_reset(struct ap_matrix_mdev *matrix_mdev,
+				    unsigned long apid,
+				    struct list_head *qlist)
+{
+	struct vfio_ap_queue *q;
+	unsigned long  apqi;
+
+	for_each_set_bit_inv(apqi, matrix_mdev->shadow_apcb.aqm, AP_DOMAINS) {
+		q = vfio_ap_mdev_get_queue(matrix_mdev, AP_MKQID(apid, apqi));
+		if (q)
+			list_add_tail(&q->reset_qnode, qlist);
+	}
+}
+
+static void reset_queues_for_apid(struct ap_matrix_mdev *matrix_mdev,
+				  unsigned long apid)
+{
+	struct list_head qlist;
+
+	INIT_LIST_HEAD(&qlist);
+	collect_queues_to_reset(matrix_mdev, apid, &qlist);
+	vfio_ap_mdev_reset_qlist(&qlist);
+}
+
 static int reset_queues_for_apids(struct ap_matrix_mdev *matrix_mdev,
 				  unsigned long *apm_reset)
 {
-	struct vfio_ap_queue *q, *tmpq;
 	struct list_head qlist;
-	unsigned long apid, apqi;
-	int apqn, ret = 0;
+	unsigned long apid;
 
 	if (bitmap_empty(apm_reset, AP_DEVICES))
 		return 0;
 
 	INIT_LIST_HEAD(&qlist);
 
-	for_each_set_bit_inv(apid, apm_reset, AP_DEVICES) {
-		for_each_set_bit_inv(apqi, matrix_mdev->shadow_apcb.aqm,
-				     AP_DOMAINS) {
-			/*
-			 * If the domain is not in the host's AP configuration,
-			 * then resetting it will fail with response code 01
-			 * (APQN not valid).
-			 */
-			if (!test_bit_inv(apqi,
-					  (unsigned long *)matrix_dev->info.aqm))
-				continue;
-
-			apqn = AP_MKQID(apid, apqi);
-			q = vfio_ap_mdev_get_queue(matrix_mdev, apqn);
-
-			if (q)
-				list_add_tail(&q->reset_qnode, &qlist);
-		}
-	}
+	for_each_set_bit_inv(apid, apm_reset, AP_DEVICES)
+		collect_queues_to_reset(matrix_mdev, apid, &qlist);
 
-	ret = vfio_ap_mdev_reset_qlist(&qlist);
-
-	list_for_each_entry_safe(q, tmpq, &qlist, reset_qnode)
-		list_del(&q->reset_qnode);
-
-	return ret;
+	return vfio_ap_mdev_reset_qlist(&qlist);
 }
 
 /**

@@ -2217,24 +2217,30 @@ void vfio_ap_mdev_remove_queue(struct ap_device *apdev)
 	matrix_mdev = q->matrix_mdev;
 
 	if (matrix_mdev) {
-		vfio_ap_unlink_queue_fr_mdev(q);
-
 		apid = AP_QID_CARD(q->apqn);
 		apqi = AP_QID_QUEUE(q->apqn);
-
-		/*
-		 * If the queue is assigned to the guest's APCB, then remove
-		 * the adapter's APID from the APCB and hot it into the guest.
-		 */
+		/* If the queue is assigned to the guest's AP configuration */
 		if (test_bit_inv(apid, matrix_mdev->shadow_apcb.apm) &&
 		    test_bit_inv(apqi, matrix_mdev->shadow_apcb.aqm)) {
+			/*
+			 * Since the queues are defined via a matrix of adapters
+			 * and domains, it is not possible to hot unplug a
+			 * single queue; so, let's unplug the adapter.
+			 */
 			clear_bit_inv(apid, matrix_mdev->shadow_apcb.apm);
 			vfio_ap_mdev_update_guest_apcb(matrix_mdev);
+			reset_queues_for_apid(matrix_mdev, apid);
+			goto done;
 		}
 	}
 
 	vfio_ap_mdev_reset_queue(q);
 	flush_work(&q->reset_work);
+
+done:
+	if (matrix_mdev)
+		vfio_ap_unlink_queue_fr_mdev(q);
+
 	dev_set_drvdata(&apdev->device, NULL);
 	kfree(q);
 	release_update_locks_for_mdev(matrix_mdev);
Signature · 1 line
2.43.0
author maintainer
#15 lore raw

PATCH v4 6/6 s390/vfio-ap: do not reset queue removed from host config

In reply to Tony Krowiak

From: Tony Krowiak <[email protected]>

When a queue is unbound from the vfio_ap device driver, it is reset to ensure its crypto data is not leaked when it is bound to another device driver. If the queue is unbound due to the fact that the adapter or domain was removed from the host's AP configuration, then attempting to reset it will fail with response code 01 (APID not valid) getting returned from the reset command. Let's ensure that the queue is assigned to the host's configuration before resetting it.

Signed-off-by Tony Krowiak <[email protected]>
Reviewed-by Jason J. Herne <[email protected]>
Reviewed-by Halil Pasic <[email protected]>
Fixes eeb386aeb5b7 ("s390/vfio-ap: handle config changed and scan complete notification")
Cc <[email protected]>
---
 drivers/s390/crypto/vfio_ap_ops.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)
drivers/s390/crypto/vfio_ap_ops.c +12 -4
index 550c936c413d..983b3b16196c 100644
@@ -2215,10 +2215,10 @@ void vfio_ap_mdev_remove_queue(struct ap_device *apdev)
 	q = dev_get_drvdata(&apdev->device);
 	get_update_locks_for_queue(q);
 	matrix_mdev = q->matrix_mdev;
+	apid = AP_QID_CARD(q->apqn);
+	apqi = AP_QID_QUEUE(q->apqn);
 
 	if (matrix_mdev) {
-		apid = AP_QID_CARD(q->apqn);
-		apqi = AP_QID_QUEUE(q->apqn);
 		/* If the queue is assigned to the guest's AP configuration */
 		if (test_bit_inv(apid, matrix_mdev->shadow_apcb.apm) &&
 		    test_bit_inv(apqi, matrix_mdev->shadow_apcb.aqm)) {

@@ -2234,8 +2234,16 @@ void vfio_ap_mdev_remove_queue(struct ap_device *apdev)
 		}
 	}
 
-	vfio_ap_mdev_reset_queue(q);
-	flush_work(&q->reset_work);
+	/*
+	 * If the queue is not in the host's AP configuration, then resetting
+	 * it will fail with response code 01, (APQN not valid); so, let's make
+	 * sure it is in the host's config.
+	 */
+	if (test_bit_inv(apid, (unsigned long *)matrix_dev->info.apm) &&
+	    test_bit_inv(apqi, (unsigned long *)matrix_dev->info.aqm)) {
+		vfio_ap_mdev_reset_queue(q);
+		flush_work(&q->reset_work);
+	}
 
 done:
 	if (matrix_mdev)
Signature · 1 line
2.43.0
maintainer
#16 lore raw
In reply to Tony Krowiak

On Mon, Jan 15, 2024 at 01:54:30PM -0500, Tony Krowiak wrote:
...

Quoted 3 lines
 drivers/s390/crypto/vfio_ap_ops.c     | 268 +++++++++++++++++---------
 drivers/s390/crypto/vfio_ap_private.h |  11 +-
 2 files changed, 184 insertions(+), 95 deletions(-)

Applied with fixups to patches 4 and 5.

Thanks!