ppc: Update targets for Power machines (spapr and pnv)
cover ppc: Update targets for Power machines (spapr and pnv)
These are some patches to move defaults to Power10 CPU, update some feature bits, and also update skiboot to 7.1. I would like to do this for 9.0 if possible.
Thanks,
Nick
Nicholas Piggin (8):
target/ppc: POWER10 does not have transactional memory ppc/spapr|pnv: Remove SAO from pa-features when running MTTCG ppc/spapr: Remove copy-paste from pa-features under TCG ppc/spapr: Adjust ibm,pa-features for POWER9 ppc/spapr: Add pa-features for POWER10 machines ppc/pnv: Permit ibm,pa-features set per machine variant ppc/pnv: Set POWER9, POWER10 ibm,pa-features bits ppc/pnv: Update skiboot to v7.1
hw/ppc/pnv.c | 110 +++++++++++++++++++++++++++++++++++++----- hw/ppc/spapr.c | 72 +++++++++++++++++++++++++-- target/ppc/cpu_init.c | 4 +- pc-bios/skiboot.lid | Bin 2527240 -> 2527328 bytes roms/skiboot | 2 +- 5 files changed, 168 insertions(+), 20 deletions(-)
Signature · 1 line
2.42.0
PATCH 1/8 target/ppc: POWER10 does not have transactional memory
POWER10 hardware implements a degenerate transactional memory facility in POWER8/9 PCR compatibility modes to permit migration from older CPUs, but POWER10 / ISA v3.1 mode does not support it so the CPU model should not support it.
--- target/ppc/cpu_init.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
target/ppc/cpu_init.c +2 -2
@@ -6576,7 +6576,7 @@ POWERPC_FAMILY(POWER10)(ObjectClass *oc, void *data)PPC2_FP_TST_ISA206 |PPC2_BCTAR_ISA207 |PPC2_LSQ_ISA207 |PPC2_ALTIVEC_207 |PPC2_ISA205 |PPC2_ISA207S |PPC2_FP_CVT_S64 | -PPC2_TM |PPC2_ISA300 |PPC2_PRCNTL |PPC2_ISA310 | +PPC2_ISA300 |PPC2_PRCNTL |PPC2_ISA310 |PPC2_MEM_LWSYNC |PPC2_BCDA_ISA206 ; pcc->msr_mask = (1ull <<MSR_SF ) | (1ull << MSR_HV) |
@@ -6620,7 +6620,7 @@ POWERPC_FAMILY(POWER10)(ObjectClass *oc, void *data) pcc->flags =POWERPC_FLAG_VRE |POWERPC_FLAG_SE |POWERPC_FLAG_BE |POWERPC_FLAG_PMM |POWERPC_FLAG_BUS_CLK |POWERPC_FLAG_CFAR | -POWERPC_FLAG_VSX |POWERPC_FLAG_TM |POWERPC_FLAG_SCV ; +POWERPC_FLAG_VSX |POWERPC_FLAG_SCV ; pcc->l1_dcache_size =0x8000 ; pcc->l1_icache_size =0x8000 ; }
Signature · 1 line
2.42.0
PATCH 2/8 ppc/spapr|pnv: Remove SAO from pa-features when running MTTCG
In reply to Nicholas PigginSAO is a page table attribute that strengthens the memory ordering of accesses. QEMU with MTTCG does not implement this, so clear it in ibm,pa-features. There is a complication with spapr migration that is addressed with comments, it is not a new problem here.
--- hw/ppc/pnv.c | 5 +++++ hw/ppc/spapr.c | 15 +++++++++++++++ 2 files changed, 20 insertions(+)
hw/ppc/pnv.c +5 -0
@@ -158,6 +158,11 @@ static void pnv_dt_core(PnvChip *chip, PnvCore *pc, void *fdt)char *nodename;int cpus_offset =get_cpus_node (fdt); +if (qemu_tcg_mttcg_enabled ()) { +/* SSO (SAO) ordering is not supported under MTTCG. */ + pa_features[4 +2 ] &= ~0x80 ; + } + nodename =g_strdup_printf ("%s@%x" , dc->fw_name, pc->pir); offset =fdt_add_subnode (fdt, cpus_offset, nodename);_FDT (offset);
hw/ppc/spapr.c +15 -0
@@ -284,6 +284,21 @@ static void spapr_dt_pa_features(SpaprMachineState *spapr,return ; } +if (qemu_tcg_mttcg_enabled ()) { +/* +* SSO (SAO) ordering is not supported under MTTCG, so disable it. +* There is no cap for this, so there is a migration bug here. +* However don't disable it entirely, to allow it to be used under +* KVM. This is a minor concern because: +* - SAO is an obscure an rarely (if ever) used feature. +* - SAO is removed from POWER10 / v3.1, so there is already a +* migration problem today. +* - Linux does not test this pa-features bit today anyway, so it's +* academic. +*/ + pa_features[4 +2 ] &= ~0x80 ; + } +if (ppc_hash64_has (cpu,PPC_HASH64_CI_LARGEPAGE )) {/* * Note: we keep CI large pages off by default because a 64K capable
Signature · 1 line
2.42.0
Re: [PATCH 2/8] ppc/spapr|pnv: Remove SAO from pa-features when running MTTCG
Quoted 38 lines · Nicholas Piggin
SAO is a page table attribute that strengthens the memory ordering of accesses. QEMU with MTTCG does not implement this, so clear it in ibm,pa-features. There is a complication with spapr migration that is addressed with comments, it is not a new problem here.
Signed-off-by Nicholas Piggin <[email protected]>--- hw/ppc/pnv.c | 5 +++++ hw/ppc/spapr.c | 15 +++++++++++++++ 2 files changed, 20 insertions(+)hw/ppc/pnv.c +5
-0@@ -158,6 +158,11 @@ static void pnv_dt_core(PnvChip *chip, PnvCore *pc, void *fdt)char *nodename;int cpus_offset =get_cpus_node (fdt); +if (qemu_tcg_mttcg_enabled ()) { +/* SSO (SAO) ordering is not supported under MTTCG. */ + pa_features[4 +2 ] &= ~0x80 ; + } + nodename =g_strdup_printf ("%s@%x" , dc->fw_name, pc->pir); offset =fdt_add_subnode (fdt, cpus_offset, nodename);_FDT (offset);hw/ppc/spapr.c +3
-0@@ -284,6 +284,21 @@ static void spapr_dt_pa_features(SpaprMachineState *spapr,return ; } +if (qemu_tcg_mttcg_enabled ()) { +/* +* SSO (SAO) ordering is not supported under MTTCG, so disable it.
hw/ppc/spapr.c static void spapr_dt_pa_features(SpaprMachineState *spapr, · line 299
Quoted 10 lines
hw/ppc/spapr.c +10
-0+* There is no cap for this, so there is a migration bug here. +* However don't disable it entirely, to allow it to be used under +* KVM. This is a minor concern because: +* - SAO is an obscure an rarely (if ever) used feature. +* - SAO is removed from POWER10 / v3.1, so there is already a +* migration problem today. +* - Linux does not test this pa-features bit today anyway, so it's +* academic. +*/ + pa_features[4 +2 ] &= ~0x80 ;
Oof.. I see the reasoning but modifying guest visible parameters based on host capabilities without a cap really worries me nonetheless.
Quoted 5 lines
hw/ppc/spapr.c +2
-0+ } +if (ppc_hash64_has (cpu,PPC_HASH64_CI_LARGEPAGE )) {/* * Note: we keep CI large pages off by default because a 64K capable
Signature · 4 lines
David Gibson | I'll have my music baroque, and my code david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_ | _way_ _around_! http://www.ozlabs.org/~dgibson
Re: [PATCH 2/8] ppc/spapr|pnv: Remove SAO from pa-features when running MTTCG
Quoted 36 lines · David Gibson
Quoted 35 lines · Nicholas Piggin
SAO is a page table attribute that strengthens the memory ordering of accesses. QEMU with MTTCG does not implement this, so clear it in ibm,pa-features. There is a complication with spapr migration that is addressed with comments, it is not a new problem here.
Signed-off-by Nicholas Piggin <[email protected]>--- hw/ppc/pnv.c | 5 +++++ hw/ppc/spapr.c | 15 +++++++++++++++ 2 files changed, 20 insertions(+)hw/ppc/pnv.c +5
-0@@ -158,6 +158,11 @@ static void pnv_dt_core(PnvChip *chip, PnvCore *pc, void *fdt)char *nodename;int cpus_offset =get_cpus_node (fdt); +if (qemu_tcg_mttcg_enabled ()) { +/* SSO (SAO) ordering is not supported under MTTCG. */ + pa_features[4 +2 ] &= ~0x80 ; + } + nodename =g_strdup_printf ("%s@%x" , dc->fw_name, pc->pir); offset =fdt_add_subnode (fdt, cpus_offset, nodename);_FDT (offset);hw/ppc/spapr.c +0
-0@@ -284,6 +284,21 @@ static void spapr_dt_pa_features(SpaprMachineState *spapr,return ; }
Quoted 16 lines
hw/ppc/spapr.c static void spapr_dt_pa_features(SpaprMachineState *spapr, · line 299
Quoted 13 lines
hw/ppc/spapr.c +13
-0+if (qemu_tcg_mttcg_enabled ()) { +/* +* SSO (SAO) ordering is not supported under MTTCG, so disable it. +* There is no cap for this, so there is a migration bug here. +* However don't disable it entirely, to allow it to be used under +* KVM. This is a minor concern because: +* - SAO is an obscure an rarely (if ever) used feature. +* - SAO is removed from POWER10 / v3.1, so there is already a +* migration problem today. +* - Linux does not test this pa-features bit today anyway, so it's +* academic. +*/ + pa_features[4 +2 ] &= ~0x80 ;Oof.. I see the reasoning but modifying guest visible parameters based on host capabilities without a cap really worries me nonetheless.
Yeah :( It's not a new problem, but changing it based on host does make it look uglier I guess.
Other option could be to just disable it always. I don't mind but someone did mention experimenting with it when I asked about removing support from Linux. They could still test with bare metal, and if ever started actually being used then we could add a cap for it.
Thanks,
Nick
Re: [PATCH 2/8] ppc/spapr|pnv: Remove SAO from pa-features when running MTTCG
Quoted 54 lines · Nicholas Piggin
Quoted 36 lines · David Gibson
Quoted 35 lines · Nicholas Piggin
SAO is a page table attribute that strengthens the memory ordering of accesses. QEMU with MTTCG does not implement this, so clear it in ibm,pa-features. There is a complication with spapr migration that is addressed with comments, it is not a new problem here.
Signed-off-by Nicholas Piggin <[email protected]>--- hw/ppc/pnv.c | 5 +++++ hw/ppc/spapr.c | 15 +++++++++++++++ 2 files changed, 20 insertions(+)hw/ppc/pnv.c +5
-0@@ -158,6 +158,11 @@ static void pnv_dt_core(PnvChip *chip, PnvCore *pc, void *fdt)char *nodename;int cpus_offset =get_cpus_node (fdt); +if (qemu_tcg_mttcg_enabled ()) { +/* SSO (SAO) ordering is not supported under MTTCG. */ + pa_features[4 +2 ] &= ~0x80 ; + } + nodename =g_strdup_printf ("%s@%x" , dc->fw_name, pc->pir); offset =fdt_add_subnode (fdt, cpus_offset, nodename);_FDT (offset);hw/ppc/spapr.c +0
-0@@ -284,6 +284,21 @@ static void spapr_dt_pa_features(SpaprMachineState *spapr,return ; }Quoted 16 lines
hw/ppc/spapr.c static void spapr_dt_pa_features(SpaprMachineState *spapr, · line 299
Quoted 13 lines
hw/ppc/spapr.c +13
-0+if (qemu_tcg_mttcg_enabled ()) { +/* +* SSO (SAO) ordering is not supported under MTTCG, so disable it. +* There is no cap for this, so there is a migration bug here. +* However don't disable it entirely, to allow it to be used under +* KVM. This is a minor concern because: +* - SAO is an obscure an rarely (if ever) used feature. +* - SAO is removed from POWER10 / v3.1, so there is already a +* migration problem today. +* - Linux does not test this pa-features bit today anyway, so it's +* academic. +*/ + pa_features[4 +2 ] &= ~0x80 ;Oof.. I see the reasoning but modifying guest visible parameters based on host capabilities without a cap really worries me nonetheless.
Quoted 2 lines
Yeah :( It's not a new problem, but changing it based on host does make it look uglier I guess.
It's not really about whether it looks uglier, it's the fact that any dependency of guest visible aspects of the VM on host properties is a potential landmine for migration.
The qemu migration model is - pretty fundamentally - that the VM should look and behave, from the point of view of the guest, the same before and after migration. If the behaviour of the VM changes based on host properties it breaks that assumption, and it does so in a way that the user can't control or even easily predict. Tools such as libvirt, or even qemu itself, can't verify that the migration is valid if there are effectively invisible parameters to the VM configuration that come from the host instead of the command line.
Quoted 5 lines
Other option could be to just disable it always. I don't mind but someone did mention experimenting with it when I asked about removing support from Linux. They could still test with bare metal, and if ever started actually being used then we could add a cap for it.
I think that's a better idea.
Signature · 4 lines
David Gibson | I'll have my music baroque, and my code david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_ | _way_ _around_! http://www.ozlabs.org/~dgibson
Re: [PATCH 2/8] ppc/spapr|pnv: Remove SAO from pa-features when running MTTCG
Quoted 62 lines · David Gibson
Quoted 54 lines · Nicholas Piggin
Quoted 36 lines · David Gibson
Quoted 35 lines · Nicholas Piggin
SAO is a page table attribute that strengthens the memory ordering of accesses. QEMU with MTTCG does not implement this, so clear it in ibm,pa-features. There is a complication with spapr migration that is addressed with comments, it is not a new problem here.
Signed-off-by Nicholas Piggin <[email protected]>--- hw/ppc/pnv.c | 5 +++++ hw/ppc/spapr.c | 15 +++++++++++++++ 2 files changed, 20 insertions(+)hw/ppc/pnv.c +5
-0@@ -158,6 +158,11 @@ static void pnv_dt_core(PnvChip *chip, PnvCore *pc, void *fdt)char *nodename;int cpus_offset =get_cpus_node (fdt); +if (qemu_tcg_mttcg_enabled ()) { +/* SSO (SAO) ordering is not supported under MTTCG. */ + pa_features[4 +2 ] &= ~0x80 ; + } + nodename =g_strdup_printf ("%s@%x" , dc->fw_name, pc->pir); offset =fdt_add_subnode (fdt, cpus_offset, nodename);_FDT (offset);hw/ppc/spapr.c +0
-0@@ -284,6 +284,21 @@ static void spapr_dt_pa_features(SpaprMachineState *spapr,return ; }Quoted 16 lines
hw/ppc/spapr.c static void spapr_dt_pa_features(SpaprMachineState *spapr, · line 299
Quoted 13 lines
hw/ppc/spapr.c +13
-0+if (qemu_tcg_mttcg_enabled ()) { +/* +* SSO (SAO) ordering is not supported under MTTCG, so disable it. +* There is no cap for this, so there is a migration bug here. +* However don't disable it entirely, to allow it to be used under +* KVM. This is a minor concern because: +* - SAO is an obscure an rarely (if ever) used feature. +* - SAO is removed from POWER10 / v3.1, so there is already a +* migration problem today. +* - Linux does not test this pa-features bit today anyway, so it's +* academic. +*/ + pa_features[4 +2 ] &= ~0x80 ;Oof.. I see the reasoning but modifying guest visible parameters based on host capabilities without a cap really worries me nonetheless.
Quoted 2 lines
Yeah :( It's not a new problem, but changing it based on host does make it look uglier I guess.
It's not really about whether it looks uglier, it's the fact that any dependency of guest visible aspects of the VM on host properties is a potential landmine for migration.
Quoted 8 lines
The qemu migration model is - pretty fundamentally - that the VM should look and behave, from the point of view of the guest, the same before and after migration. If the behaviour of the VM changes based on host properties it breaks that assumption, and it does so in a way that the user can't control or even easily predict. Tools such as libvirt, or even qemu itself, can't verify that the migration is valid if there are effectively invisible parameters to the VM configuration that come from the host instead of the command line.
I agree, you did manage to drill this lesson in.
What I meant was that -- today we have a problem where a target can run on a host with buggy implementation, whether boot or migration. This patch addresses the boot case. Migration case is still broken, arguably the situation is still improved. Anyway...
Quoted 7 lines
Quoted 5 lines
Other option could be to just disable it always. I don't mind but someone did mention experimenting with it when I asked about removing support from Linux. They could still test with bare metal, and if ever started actually being used then we could add a cap for it.
I think that's a better idea.
Alright we'll go that way.
Thanks,
Nick
PATCH 3/8 ppc/spapr: Remove copy-paste from pa-features under TCG
In reply to Nicholas PigginTCG does not support copy/paste instructions. Remove it from ibm,pa-features when running TCG. Similarly to SAO, there is a migration issue here, but this doesn't really make things worse, a cap would be required to fix it.
--- hw/ppc/spapr.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
hw/ppc/spapr.c +12 -0
@@ -299,6 +299,18 @@ static void spapr_dt_pa_features(SpaprMachineState *spapr, pa_features[4 +2 ] &= ~0x80 ; } +if (tcg_enabled ()) { +/* +* TCG does not implement copy/paste instructions. This causes a +* migration issue similarly to SAO, but there is no avoiding that +* since there is no KVM cap or way to disable the instructions in +* hardware. It's also quite an obscure instruction and is not really +* used in KVM guests since KVM does not support accelerator pass- +* through anyway. +*/ + pa_features[38 +2 ] &= ~0x80 ; + } +if (ppc_hash64_has (cpu,PPC_HASH64_CI_LARGEPAGE )) {/* * Note: we keep CI large pages off by default because a 64K capable
Signature · 1 line
2.42.0
PATCH 4/8 ppc/spapr: Adjust ibm,pa-features for POWER9
In reply to Nicholas Piggin"MMR" and "SPR SO" are not implemented in POWER9, so clear those bits. HTM is not set by default, and only later if the cap is set, so remove the comment that suggests otherwise.
--- hw/ppc/spapr.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
hw/ppc/spapr.c +5 -5
@@ -248,14 +248,14 @@ static void spapr_dt_pa_features(SpaprMachineState *spapr,0x80 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 ,/* 6 - 11 */ /* 16: Vector */ 0x00 ,0x00 ,0x00 ,0x00 ,0x80 ,0x00 ,/* 12 - 17 */ -/* 18: Vec. Scalar, 20: Vec. XOR, 22: HTM */ +/* 18: Vec. Scalar, 20: Vec. XOR */ 0x80 ,0x00 ,0x80 ,0x00 ,0x00 ,0x00 ,/* 18 - 23 */ /* 24: Ext. Dec, 26: 64 bit ftrs, 28: PM ftrs */ 0x80 ,0x00 ,0x80 ,0x00 ,0x80 ,0x00 ,/* 24 - 29 */ -/* 30: MMR, 32: LE atomic, 34: EBB + ext EBB */ -0x80 ,0x00 ,0x80 ,0x00 ,0xC0 ,0x00 ,/* 30 - 35 */ -/* 36: SPR SO, 38: Copy/Paste, 40: Radix MMU */ -0x80 ,0x00 ,0x80 ,0x00 ,0x80 ,0x00 ,/* 36 - 41 */ +/* 32: LE atomic, 34: EBB + ext EBB */ +0x00 ,0x00 ,0x80 ,0x00 ,0xC0 ,0x00 ,/* 30 - 35 */ +/* 38: Copy/Paste, 40: Radix MMU */ +0x00 ,0x00 ,0x80 ,0x00 ,0x80 ,0x00 ,/* 36 - 41 */ /* 42: PM, 44: PC RA, 46: SC vec'd */ 0x80 ,0x00 ,0x80 ,0x00 ,0x80 ,0x00 ,/* 42 - 47 */ /* 48: SIMD, 50: QP BFP, 52: String */
Signature · 1 line
2.42.0
PATCH 5/8 ppc/spapr: Add pa-features for POWER10 machines
In reply to Nicholas Piggin--- hw/ppc/spapr.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+)
hw/ppc/spapr.c +34 -0
@@ -265,6 +265,36 @@ static void spapr_dt_pa_features(SpaprMachineState *spapr,/* 60: NM atomic, 62: RNG */ 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, /* 60 - 65 */ }; +/* 3.1 removes SAO, HTM support */ +uint8_t pa_features_31[] = {74 ,0 , +/* 0: MMU|FPU|SLB|RUN|DABR|NX, 1: fri[nzpm]|DABRX|SPRG3|SLB0|PP110 */ +/* 2: VPM|DS205|PPR|DS202|DS206, 3: LSD|URG, 5: LE|CFAR|EB|LSQ */ +0xf6 ,0x1f ,0xc7 ,0xc0 ,0x00 ,0xf0 ,/* 0 - 5 */ +/* 6: DS207 */ +0x80 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 ,/* 6 - 11 */ +/* 16: Vector */ +0x00 ,0x00 ,0x00 ,0x00 ,0x80 ,0x00 ,/* 12 - 17 */ +/* 18: Vec. Scalar, 20: Vec. XOR */ +0x80 ,0x00 ,0x80 ,0x00 ,0x00 ,0x00 ,/* 18 - 23 */ +/* 24: Ext. Dec, 26: 64 bit ftrs, 28: PM ftrs */ +0x80 ,0x00 ,0x80 ,0x00 ,0x80 ,0x00 ,/* 24 - 29 */ +/* 32: LE atomic, 34: EBB + ext EBB */ +0x00 ,0x00 ,0x80 ,0x00 ,0xC0 ,0x00 ,/* 30 - 35 */ +/* 38: Copy/Paste, 40: Radix MMU */ +0x00 ,0x00 ,0x80 ,0x00 ,0x80 ,0x00 ,/* 36 - 41 */ +/* 42: PM, 44: PC RA, 46: SC vec'd */ +0x80 ,0x00 ,0x80 ,0x00 ,0x80 ,0x00 ,/* 42 - 47 */ +/* 48: SIMD, 50: QP BFP, 52: String */ +0x80 ,0x00 ,0x80 ,0x00 ,0x80 ,0x00 ,/* 48 - 53 */ +/* 54: DecFP, 56: DecI, 58: SHA */ +0x80 ,0x00 ,0x80 ,0x00 ,0x80 ,0x00 ,/* 54 - 59 */ +/* 60: NM atomic, 62: RNG */ +0x80 ,0x00 ,0x80 ,0x00 ,0x00 ,0x00 ,/* 60 - 65 */ +/* 68: DEXCR[SBHE|IBRTPDUS|SRAPD|NPHIE|PHIE] */ +0x00 ,0x00 ,0xce ,0x00 ,0x00 ,0x00 ,/* 66 - 71 */ +/* 72: Hash Check */ +0x80 ,0x00 ,/* 73 */ + };uint8_t *pa_features =NULL ;size_t pa_size;
@@ -280,6 +310,10 @@ static void spapr_dt_pa_features(SpaprMachineState *spapr, pa_features = pa_features_300; pa_size =sizeof (pa_features_300); } +if (ppc_check_compat (cpu,CPU_POWERPC_LOGICAL_3_10 ,0 , cpu->compat_pvr)) { + pa_features = pa_features_31; + pa_size =sizeof (pa_features_31); + }if (!pa_features) {return ; }
Signature · 1 line
2.42.0
PATCH 6/8 ppc/pnv: Permit ibm,pa-features set per machine variant
In reply to Nicholas PigginThis allows different pa-features for powernv8/9/10.
--- hw/ppc/pnv.c | 41 +++++++++++++++++++++++++++++------------ 1 file changed, 29 insertions(+), 12 deletions(-)
hw/ppc/pnv.c +29 -12
@@ -133,7 +133,7 @@ static int get_cpus_node(void *fdt)* device tree, used in XSCOM to address cores and in interrupt * servers. */ -static void pnv_dt_core (PnvChip *chip,PnvCore *pc,void *fdt) +static int pnv_dt_core (PnvChip *chip,PnvCore *pc,void *fdt) {PowerPCCPU *cpu = pc->threads[0 ];CPUState *cs =CPU (cpu);
@@ -149,11 +149,6 @@ static void pnv_dt_core(PnvChip *chip, PnvCore *pc, void *fdt)uint32_t cpufreq =1000000000 ;uint32_t page_sizes_prop[64 ];size_t page_sizes_prop_size; -const uint8_t pa_features[] = {24 ,0 , -0xf6 ,0x3f ,0xc7 ,0xc0 ,0x80 ,0xf0 , -0x80 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 , -0x00 ,0x00 ,0x00 ,0x00 ,0x80 ,0x00 , -0x80 ,0x00 ,0x80 ,0x00 ,0x80 ,0x00 };int offset;char *nodename;int cpus_offset =get_cpus_node (fdt);
@@ -241,15 +236,14 @@ static void pnv_dt_core(PnvChip *chip, PnvCore *pc, void *fdt) page_sizes_prop, page_sizes_prop_size))); } -_FDT ((fdt_setprop (fdt, offset,"ibm,pa-features" , - pa_features,sizeof (pa_features)))); -/* Build interrupt servers properties */ for (i =0 ; i < smt_threads; i++) { servers_prop[i] =cpu_to_be32 (pc->pir + i); }_FDT ((fdt_setprop (fdt, offset,"ibm,ppc-interrupt-server#s" , servers_prop,sizeof (*servers_prop) * smt_threads))); + +return offset; } static void pnv_dt_icp(PnvChip *chip, void *fdt, uint32_t pir,
@@ -304,6 +298,17 @@ PnvChip *pnv_chip_add_phb(PnvChip *chip, PnvPHB *phb)return chip; } +/* +* Same as spapr pa_features_207 except pnv always enables CI largepages bit. +* HTM is always enabled because TCG does implement HTM, it's just a +* degenerate implementation. +*/ +static const uint8_t pa_features_207[] = {24 ,0 , +0xf6 ,0x3f ,0xc7 ,0xc0 ,0x80 ,0xf0 , +0x80 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 , +0x00 ,0x00 ,0x00 ,0x00 ,0x80 ,0x00 , +0x80 ,0x00 ,0x80 ,0x00 ,0x80 ,0x00 }; +static void pnv_chip_power8_dt_populate (PnvChip *chip,void *fdt) {static const char compat[] ="ibm,power8-xscom\0ibm,xscom" ;
@@ -316,8 +321,12 @@ static void pnv_chip_power8_dt_populate(PnvChip *chip, void *fdt)for (i =0 ; i < chip->nr_cores; i++) {PnvCore *pnv_core = chip->cores[i]; +int offset; + + offset =pnv_dt_core (chip, pnv_core, fdt); -pnv_dt_core (chip, pnv_core, fdt); +_FDT ((fdt_setprop (fdt, offset,"ibm,pa-features" , + pa_features_207,sizeof (pa_features_207))));/* Interrupt Control Presenters (ICP). One per core. */ pnv_dt_icp (chip, fdt, pnv_core->pir,CPU_CORE (pnv_core)->nr_threads);
@@ -340,8 +349,12 @@ static void pnv_chip_power9_dt_populate(PnvChip *chip, void *fdt)for (i =0 ; i < chip->nr_cores; i++) {PnvCore *pnv_core = chip->cores[i]; +int offset; -pnv_dt_core (chip, pnv_core, fdt); + offset =pnv_dt_core (chip, pnv_core, fdt); + +_FDT ((fdt_setprop (fdt, offset,"ibm,pa-features" , + pa_features_207,sizeof (pa_features_207)))); }if (chip->ram_size) {
@@ -363,8 +376,12 @@ static void pnv_chip_power10_dt_populate(PnvChip *chip, void *fdt)for (i =0 ; i < chip->nr_cores; i++) {PnvCore *pnv_core = chip->cores[i]; +int offset; + + offset =pnv_dt_core (chip, pnv_core, fdt); -pnv_dt_core (chip, pnv_core, fdt); +_FDT ((fdt_setprop (fdt, offset,"ibm,pa-features" , + pa_features_207,sizeof (pa_features_207)))); }if (chip->ram_size) {
Signature · 1 line
2.42.0
PATCH 7/8 ppc/pnv: Set POWER9, POWER10 ibm,pa-features bits
In reply to Nicholas PigginCopy the pa-features arrays from spapr, adjusting slightly as described in comments.
--- hw/ppc/pnv.c | 68 ++++++++++++++++++++++++++++++++++++++++++++++++-- hw/ppc/spapr.c | 1 + 2 files changed, 67 insertions(+), 2 deletions(-)
hw/ppc/pnv.c +66 -2
@@ -337,6 +337,36 @@ static void pnv_chip_power8_dt_populate(PnvChip *chip, void *fdt) } } +/* +* Same as spapr pa_features_300 except pnv always enables CI largepages bit, +* always disables copy/paste. +*/ +static const uint8_t pa_features_300[] = {66 ,0 , +/* 0: MMU|FPU|SLB|RUN|DABR|NX, 1: CILRG|fri[nzpm]|DABRX|SPRG3|SLB0|PP110 */ +/* 2: VPM|DS205|PPR|DS202|DS206, 3: LSD|URG, 5: LE|CFAR|EB|LSQ */ +0xf6 ,0x3f ,0xc7 ,0xc0 ,0x00 ,0xf0 ,/* 0 - 5 */ +/* 6: DS207 */ +0x80 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 ,/* 6 - 11 */ +/* 16: Vector */ +0x00 ,0x00 ,0x00 ,0x00 ,0x80 ,0x00 ,/* 12 - 17 */ +/* 18: Vec. Scalar, 20: Vec. XOR, 22: HTM */ +0x80 ,0x00 ,0x80 ,0x00 ,0x80 ,0x00 ,/* 18 - 23 */ +/* 24: Ext. Dec, 26: 64 bit ftrs, 28: PM ftrs */ +0x80 ,0x00 ,0x80 ,0x00 ,0x80 ,0x00 ,/* 24 - 29 */ +/* 32: LE atomic, 34: EBB + ext EBB */ +0x00 ,0x00 ,0x80 ,0x00 ,0xC0 ,0x00 ,/* 30 - 35 */ +/* 40: Radix MMU */ +0x00 ,0x00 ,0x00 ,0x00 ,0x80 ,0x00 ,/* 36 - 41 */ +/* 42: PM, 44: PC RA, 46: SC vec'd */ +0x80 ,0x00 ,0x80 ,0x00 ,0x80 ,0x00 ,/* 42 - 47 */ +/* 48: SIMD, 50: QP BFP, 52: String */ +0x80 ,0x00 ,0x80 ,0x00 ,0x80 ,0x00 ,/* 48 - 53 */ +/* 54: DecFP, 56: DecI, 58: SHA */ +0x80 ,0x00 ,0x80 ,0x00 ,0x80 ,0x00 ,/* 54 - 59 */ +/* 60: NM atomic, 62: RNG */ +0x80 ,0x00 ,0x80 ,0x00 ,0x00 ,0x00 ,/* 60 - 65 */ +}; +static void pnv_chip_power9_dt_populate (PnvChip *chip,void *fdt) {static const char compat[] ="ibm,power9-xscom\0ibm,xscom" ;
@@ -354,7 +384,7 @@ static void pnv_chip_power9_dt_populate(PnvChip *chip, void *fdt) offset =pnv_dt_core (chip, pnv_core, fdt);_FDT ((fdt_setprop (fdt, offset,"ibm,pa-features" , - pa_features_207,sizeof (pa_features_207)))); + pa_features_300,sizeof (pa_features_300)))); }if (chip->ram_size) {
@@ -364,6 +394,40 @@ static void pnv_chip_power9_dt_populate(PnvChip *chip, void *fdt)pnv_dt_lpc (chip, fdt,0 ,PNV9_LPCM_BASE (chip),PNV9_LPCM_SIZE ); } +/* +* Same as spapr pa_features_31 except pnv always enables CI largepages bit, +* always disables copy/paste. +*/ +static const uint8_t pa_features_31[] = {74 ,0 , +/* 0: MMU|FPU|SLB|RUN|DABR|NX, 1: CILRG|fri[nzpm]|DABRX|SPRG3|SLB0|PP110 */ +/* 2: VPM|DS205|PPR|DS202|DS206, 3: LSD|URG, 5: LE|CFAR|EB|LSQ */ +0xf6 ,0x3f ,0xc7 ,0xc0 ,0x00 ,0xf0 ,/* 0 - 5 */ +/* 6: DS207 */ +0x80 ,0x00 ,0x00 ,0x00 ,0x00 ,0x00 ,/* 6 - 11 */ +/* 16: Vector */ +0x00 ,0x00 ,0x00 ,0x00 ,0x80 ,0x00 ,/* 12 - 17 */ +/* 18: Vec. Scalar, 20: Vec. XOR */ +0x80 ,0x00 ,0x80 ,0x00 ,0x00 ,0x00 ,/* 18 - 23 */ +/* 24: Ext. Dec, 26: 64 bit ftrs, 28: PM ftrs */ +0x80 ,0x00 ,0x80 ,0x00 ,0x80 ,0x00 ,/* 24 - 29 */ +/* 32: LE atomic, 34: EBB + ext EBB */ +0x00 ,0x00 ,0x80 ,0x00 ,0xC0 ,0x00 ,/* 30 - 35 */ +/* 40: Radix MMU */ +0x00 ,0x00 ,0x00 ,0x00 ,0x80 ,0x00 ,/* 36 - 41 */ +/* 42: PM, 44: PC RA, 46: SC vec'd */ +0x80 ,0x00 ,0x80 ,0x00 ,0x80 ,0x00 ,/* 42 - 47 */ +/* 48: SIMD, 50: QP BFP, 52: String */ +0x80 ,0x00 ,0x80 ,0x00 ,0x80 ,0x00 ,/* 48 - 53 */ +/* 54: DecFP, 56: DecI, 58: SHA */ +0x80 ,0x00 ,0x80 ,0x00 ,0x80 ,0x00 ,/* 54 - 59 */ +/* 60: NM atomic, 62: RNG */ +0x80 ,0x00 ,0x80 ,0x00 ,0x00 ,0x00 ,/* 60 - 65 */ +/* 68: DEXCR[SBHE|IBRTPDUS|SRAPD|NPHIE|PHIE] */ +0x00 ,0x00 ,0xce ,0x00 ,0x00 ,0x00 ,/* 66 - 71 */ +/* 72: Hash Check */ +0x80 ,0x00 ,/* 73 */ +}; +static void pnv_chip_power10_dt_populate (PnvChip *chip,void *fdt) {static const char compat[] ="ibm,power10-xscom\0ibm,xscom" ;
@@ -381,7 +445,7 @@ static void pnv_chip_power10_dt_populate(PnvChip *chip, void *fdt) offset =pnv_dt_core (chip, pnv_core, fdt);_FDT ((fdt_setprop (fdt, offset,"ibm,pa-features" , - pa_features_207,sizeof (pa_features_207)))); + pa_features_31,sizeof (pa_features_31)))); }if (chip->ram_size) {
hw/ppc/spapr.c +1 -0
@@ -233,6 +233,7 @@ static void spapr_dt_pa_features(SpaprMachineState *spapr, PowerPCCPU *cpu, void *fdt, int offset) { +/* These should be kept in sync with pnv */ uint8_t pa_features_206[] = {6 ,0 ,0xf6 ,0x1f ,0xc7 ,0x00 ,0x80 ,0xc0 }; uint8_t pa_features_207[] = { 24, 0,
Signature · 1 line
2.42.0
PATCH 8/8 ppc/pnv: Update skiboot to v7.1
In reply to Nicholas PigginThis includes a number of improvements and fixes. Importantly there is a change for QEMU platforms to permit the ChipTOD to be initialised if it is present in the device tree. This will facilitate ChipTOD enablement in pnv.
---
[blob omitted, patch is just for comments]
pc-bios/skiboot.lid | Bin 2527240 -> 2527328 bytes roms/skiboot | 2 +- 2 files changed, 1 insertion(+), 1 deletion(-)
roms/skiboot +1 -1
@@ -1 +1 @@ -Subproject commit 24a7eb35966d93455520bc2debdd7954314b638b +Subproject commit dbd5de6624d7466bb67d1eb4e57bc3a8e2ad9e87
Signature · 1 line
2.42.0
Re: [PATCH 8/8] ppc/pnv: Update skiboot to v7.1
Quoted 6 lines · Nicholas Piggin
This includes a number of improvements and fixes. Importantly there is a change for QEMU platforms to permit the ChipTOD to be initialised if it is present in the device tree. This will facilitate ChipTOD enablement in pnv.
Signed-off-by Nicholas Piggin <[email protected]>
Thanks,
C.
Quoted 13 lines
---> [blob omitted, patch is just for comments]
pc-bios/skiboot.lid | Bin 2527240 -> 2527328 bytes roms/skiboot | 2 +- 2 files changed, 1 insertion(+), 1 deletion(-)roms/skiboot +1
-1@@ -1 +1 @@ -Subproject commit 24a7eb35966d93455520bc2debdd7954314b638b +Subproject commit dbd5de6624d7466bb67d1eb4e57bc3a8e2ad9e87