wandboard: Convert to watchdog driver model
Subsystems (2)
Fabio Estevam
reviewerPATCH 1/1 wandboard: Convert to watchdog driver model
Commit 68dcbdd594d4 ("ARM: imx: Add weak default reset_cpu()") caused the 'reset' command in U-Boot to not cause a board reset.
Fix it by switching to the watchdog driver model via sysreset, which is the preferred method for implementing the watchdog reset.
Signed-off-by Fabio Estevam <[email protected]>
--- arch/arm/dts/imx6qdl-wandboard-u-boot.dtsi | 10 ++++++++++ configs/wandboard_defconfig | 3 +++ 2 files changed, 13 insertions(+)
arch/arm/dts/imx6qdl-wandboard-u-boot.dtsi +10 -0
@@ -6,4 +6,14 @@ aliases { mmc0 = &usdhc3; }; + + wdt-reboot { + compatible = "wdt-reboot"; + wdt = <&wdog1>; + bootph-pre-ram; + }; +}; + +&wdog1 { + bootph-pre-ram; };
configs/wandboard_defconfig +3 -0
@@ -75,6 +75,8 @@ CONFIG_DM_PMIC_PFUZE100=y CONFIG_SCSI=y CONFIG_DM_SERIAL=y CONFIG_MXC_UART=y +CONFIG_SYSRESET=y +CONFIG_SYSRESET_WATCHDOG=y CONFIG_DM_THERMAL=y CONFIG_USB=y CONFIG_VIDEO=y
@@ -88,3 +90,4 @@ CONFIG_IMX_HDMI=y CONFIG_SPLASH_SCREEN=y CONFIG_SPLASH_SCREEN_ALIGN=y CONFIG_BMP_16BPP=y +CONFIG_IMX_WATCHDOG=y
Signature · 1 line
2.34.1
Quoted 8 lines · Fabio Estevam
Commit
68dcbdd594d4("ARM: imx: Add weak defaultreset_cpu()") caused the 'reset' command in U-Boot to not cause a board reset.Fix it by switching to the watchdog driver model via sysreset, which is the preferred method for implementing the watchdog reset.
Signed-off-by Fabio Estevam <[email protected]>
Applied, thanks.