arm64: dts: ls1012a: correct the size of dcfg block
Subsystems (2)
Frank Li
maintainerPATCH 1/4 arm64: dts: ls1012a: correct the size of dcfg block
From: Li Yang <[email protected]>
Correct the size of dcfg block to 4k.
Signed-off-by Zhang Ying-22455 <[email protected]>
Signed-off-by Li Yang <[email protected]>
Signed-off-by Frank Li <[email protected]>
--- arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +1 -1
@@ -290,7 +290,7 @@ sec_mon: sec_mon@1e90000 { dcfg: dcfg@1ee0000 { compatible = "fsl,ls1012a-dcfg", "syscon"; - reg = <0x0 0x1ee0000 0x0 0x10000>; + reg = <0x0 0x1ee0000 0x0 0x1000>; big-endian; };
Signature · 1 line
2.34.1
Frank Li
maintainerPATCH 2/4 arm64: dts: ls1012a: add big-endian property for PCIe nodes
From: Hou Zhiqiang <[email protected]>
Add the big-endian property for LS1012A PCIe devicetree nodes.
Signed-off-by Hou Zhiqiang <[email protected]>
Signed-off-by Frank Li <[email protected]>
--- arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 1 + 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +1 -0
@@ -550,6 +550,7 @@ pcie1: pcie@3400000 { <0000 0 0 2 &gic 0 111 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 3 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>, <0000 0 0 4 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>; + big-endian; status = "disabled"; };
Signature · 1 line
2.34.1
Frank Li
maintainerPATCH 3/4 arm64: dts: ls1012a: add gpio for i2c bus recovery
In reply to Frank LiFrom: Li Yang <[email protected]>
Add compatible string fsl,ls1012a-i2c and scl-gpios to support i2c bus recovery when I2C bus lock by i2c devices.
[Leo: updated scl-gpios to match RM ]
Signed-off-by Li Yang <[email protected]>
Signed-off-by Frank Li <[email protected]>
--- arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +4 -2
@@ -351,24 +351,26 @@ tmu: tmu@1f00000 { }; i2c0: i2c@2180000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,ls1012a-i2c", "fsl,vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2180000 0x0 0x10000>; interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>; + scl-gpios = <&gpio0 2 0>; status = "disabled"; }; i2c1: i2c@2190000 { - compatible = "fsl,vf610-i2c"; + compatible = "fsl,ls1012a-i2c", "fsl,vf610-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2190000 0x0 0x10000>; interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>; + scl-gpios = <&gpio0 13 0>; status = "disabled"; };
Signature · 1 line
2.34.1
Frank Li
maintainerPATCH 4/4 arm64: dts: ls1012a: fix DWC3 USB VBUS glitch issue
In reply to Frank LiFrom: Ran Wang <[email protected]>
Fix DWC3 USB VBUS glitch issue.
Signed-off-by Ran Wang <[email protected]>
Signed-off-by Frank Li <[email protected]>
--- arch/arm/boot/dts/nxp/ls/ls1021a.dtsi | 1 + arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 1 + 2 files changed, 2 insertions(+)
arch/arm/boot/dts/nxp/ls/ls1021a.dtsi +1 -0
@@ -809,6 +809,7 @@ usb3: usb@3100000 { snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + snps,host-vbus-glitches; }; pcie@3400000 {
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +1 -0
@@ -501,6 +501,7 @@ usb0: usb@2f00000 { snps,quirk-frame-length-adjustment = <0x20>; snps,dis_rxdet_inp3_quirk; snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; + snps,host-vbus-glitches; }; sata: sata@3200000 {
Signature · 1 line
2.34.1
Shawn Guo
AppliedQuoted 7 lines · Frank Li
From: Li Yang <[email protected]>
Correct the size of dcfg block to 4k.
Signed-off-by Zhang Ying-22455 <[email protected]>Signed-off-by Li Yang <[email protected]>Signed-off-by Frank Li <[email protected]>
Applied all, thanks!