Skip to contentSkip to conversation

x86/trampoline: Bypass compat mode in trampoline_start64() if not needed

PATCH In review Kirill A. Shutemov 1 participant 3 messages Jan 26, 2024 – Feb 23, 2024 x86

lore
Share & tools
lore
#0 lore raw

PATCH v4 1/1 x86/trampoline: Bypass compat mode in trampoline_start64() if not needed

The trampoline_start64() vector is used when a secondary CPU starts in 64-bit mode. The current implementation directly enters compatibility mode. It is necessary to disable paging and re-enable it in the correct paging mode: either 4- or 5-level, depending on the configuration.

The X86S[1] ISA does not support compatibility mode in ring 0, and paging cannot be disabled.

The trampoline_start64() function is reworked to only enter compatibility mode if it is necessary to change the paging mode. If the CPU is already in the desired paging mode, it will proceed in long mode.

This change will allow a secondary CPU to boot on an X86S machine as long as the CPU is already in the correct paging mode.

In the future, there will be a mechanism to switch between paging modes without disabling paging.

[1] https://www.intel.com/content/www/us/en/developer/articles/technical/envisioning-future-simplified-architecture.html

---
v4:
- Establish CS on jumping to tr_start (Andi);
v3:
- tr_cr4 is 32-bit, use 32-bit XOR to access it (Sean).
- Use 32-bit TEST instead of AND to check if LA57 different between

    CR4 and tr_cr4 (Sean).
 v2:
  - Fix build with GCC;
---
 arch/x86/realmode/rm/trampoline_64.S | 33 +++++++++++++++++++++++++++-
 1 file changed, 32 insertions(+), 1 deletion(-)
arch/x86/realmode/rm/trampoline_64.S +32 -1
index c9f76fae902e..14d9c7daf90f 100644
@@ -37,13 +37,15 @@
 	.text
 	.code16
 
-.macro LOCK_AND_LOAD_REALMODE_ESP lock_pa=0
+.macro LOCK_AND_LOAD_REALMODE_ESP lock_pa=0 lock_rip=0
 	/*
 	 * Make sure only one CPU fiddles with the realmode stack
 	 */
 .Llock_rm\@:
 	.if \lock_pa
         lock btsl       $0, pa_tr_lock
+	.elseif \lock_rip
+        lock btsl       $0, tr_lock(%rip)
 	.else
         lock btsl       $0, tr_lock
 	.endif
@@ -220,6 +222,35 @@ SYM_CODE_START(trampoline_start64)
 	lidt	tr_idt(%rip)
 	lgdt	tr_gdt64(%rip)
 
+	/* Check if paging mode has to be changed */
+	movq	%cr4, %rax
+	xorl	tr_cr4(%rip), %eax
+	testl	$X86_CR4_LA57, %eax
+	jnz	.L_switch_paging
+
+	/* Paging mode is correct proceed in 64-bit mode */
+
+	LOCK_AND_LOAD_REALMODE_ESP lock_rip=1
+
+	movw	$__KERNEL_DS, %dx
+	movl	%edx, %ss
+	addl	$pa_real_mode_base, %esp
+	movl	%edx, %ds
+	movl	%edx, %es
+	movl	%edx, %fs
+	movl	%edx, %gs
+
+	movl	$pa_trampoline_pgd, %eax
+	movq	%rax, %cr3
+
+	pushq	$__KERNEL_CS
+	pushq	tr_start(%rip)
+	lretq
+.L_switch_paging:
+	/*
+	 * To switch between 4- and 5-level paging modes, it is necessary
+	 * to disable paging. This must be done in the compatibility mode.
+	 */
 	ljmpl	*tr_compat(%rip)
 SYM_CODE_END(trampoline_start64)
 
Signature · 1 line
2.43.0
#1 lore raw
Quoted 18 lines · Kirill A. Shutemov

The trampoline_start64() vector is used when a secondary CPU starts in 64-bit mode. The current implementation directly enters compatibility mode. It is necessary to disable paging and re-enable it in the correct paging mode: either 4- or 5-level, depending on the configuration.

The X86S[1] ISA does not support compatibility mode in ring 0, and paging cannot be disabled.

The trampoline_start64() function is reworked to only enter compatibility mode if it is necessary to change the paging mode. If the CPU is already in the desired paging mode, it will proceed in long mode.

This change will allow a secondary CPU to boot on an X86S machine as long as the CPU is already in the correct paging mode.

In the future, there will be a mechanism to switch between paging modes without disabling paging.

Quoted 6 lines

[1] https://www.intel.com/content/www/us/en/developer/articles/technical/envisioning-future-simplified-architecture.html

Any feedback?

Signature · 1 line
  Kiryl Shutsemau / Kirill A. Shutemov
#2 lore raw
Quoted 19 lines · Kirill A. Shutemov
Quoted 18 lines · Kirill A. Shutemov

The trampoline_start64() vector is used when a secondary CPU starts in 64-bit mode. The current implementation directly enters compatibility mode. It is necessary to disable paging and re-enable it in the correct paging mode: either 4- or 5-level, depending on the configuration.

The X86S[1] ISA does not support compatibility mode in ring 0, and paging cannot be disabled.

The trampoline_start64() function is reworked to only enter compatibility mode if it is necessary to change the paging mode. If the CPU is already in the desired paging mode, it will proceed in long mode.

This change will allow a secondary CPU to boot on an X86S machine as long as the CPU is already in the correct paging mode.

In the future, there will be a mechanism to switch between paging modes without disabling paging.

Quoted 8 lines
Quoted 6 lines

[1] https://www.intel.com/content/www/us/en/developer/articles/technical/envisioning-future-simplified-architecture.html

Any feedback?

Anybody?

Signature · 1 line
  Kiryl Shutsemau / Kirill A. Shutemov