Skip to contentSkip to conversation

drm/i915/dp: Add jitter WAs for MST/FEC/DSC links

PATCH In review Imre Deak 3 participants 17 messages Jan 29, 2024 – Apr 10, 2024

Subsystems (3)
lore
Share & tools
lore

Imre Deak

author
#0 lore raw

cover drm/i915/dp: Add jitter WAs for MST/FEC/DSC links

Add workarounds to fix jitter issues on non-UHBR/UHBR MST/FEC/DSC links. This fixes at least the output on MTLP + a DELL docking station MST/DSC link with different monitors connected.

Imre Deak (6):
drm/i915/adlp: Add MST FEC BS jitter WA (Wa_14013163432) drm/i915/adlp: Add MST short HBlank WA (Wa_14014143976) drm/i915/adlp: Add DP MST DPT/DPTP alignment WA (Wa_14014143976) drm/i915/adlp+: Add DSC early pixel count scaling WA (Wa_1409098942) drm/i915/mtl+: Disable DP/DSC SF insertion at EOL WA drm/i915/mtl: Add DP FEC BS jitter WA

 drivers/gpu/drm/i915/display/intel_display.c | 25 ++++++++++++++
 drivers/gpu/drm/i915/display/intel_dp_mst.c  | 35 ++++++++++++++++++++
 drivers/gpu/drm/i915/i915_reg.h              | 10 ++++++
 3 files changed, 70 insertions(+)
Signature · 1 line
2.39.2
author
#1 lore raw

PATCH 1/6 drm/i915/adlp: Add MST FEC BS jitter WA (Wa_14013163432)

Add a workaround to fix BS (blank start) to BS jitter issues on MST links when FEC is enabled. Neither Bspec requires this nor Windows clears the WA when disabling the output - presumedly because CHICKEN_MISC_3 gets reset after disabling the pipe/transcoder - so follow suit.

Bspec: 50050, 55424

---
 drivers/gpu/drm/i915/display/intel_dp_mst.c | 24 +++++++++++++++++++++
 drivers/gpu/drm/i915/i915_reg.h             |  3 +++
 2 files changed, 27 insertions(+)
drivers/gpu/drm/i915/display/intel_dp_mst.c +24 -0
index 5fa25a5a36b55..22c1759f912db 100644
@@ -1106,6 +1106,28 @@ static void intel_mst_pre_enable_dp(struct intel_atomic_state *state,
 	intel_ddi_set_dp_msa(pipe_config, conn_state);
 }
 
+static void enable_bs_jitter_was(const struct intel_crtc_state *crtc_state)
+{
+	struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev);
+	u32 clear = 0;
+	u32 set = 0;
+
+	if (!IS_ALDERLAKE_P(i915))
+		return;
+
+	if (!IS_DISPLAY_STEP(i915, STEP_D0, STEP_FOREVER))
+		return;
+
+	/* Wa_14013163432:adlp */
+	if (crtc_state->fec_enable || intel_dp_is_uhbr(crtc_state))
+		set |= DP_MST_FEC_BS_JITTER_WA(crtc_state->cpu_transcoder);
+
+	if (!clear && !set)
+		return;
+
+	intel_de_rmw(i915, CHICKEN_MISC_3, clear, set);
+}
+
 static void intel_mst_enable_dp(struct intel_atomic_state *state,
 				struct intel_encoder *encoder,
 				const struct intel_crtc_state *pipe_config,
@@ -1134,6 +1156,8 @@ static void intel_mst_enable_dp(struct intel_atomic_state *state,
 			       TRANS_DP2_VFREQ_PIXEL_CLOCK(crtc_clock_hz & 0xffffff));
 	}
 
+	enable_bs_jitter_was(pipe_config);
+
 	intel_ddi_enable_transcoder_func(encoder, pipe_config);
 
 	clear_act_sent(encoder, pipe_config);
drivers/gpu/drm/i915/i915_reg.h +3 -0
index 75bc08081fce9..67b7d02ea37bf 100644
@@ -4555,6 +4555,9 @@
 #define   GLK_CL1_PWR_DOWN		REG_BIT(11)
 #define   GLK_CL0_PWR_DOWN		REG_BIT(10)
 
+#define CHICKEN_MISC_3		_MMIO(0x42088)
+#define   DP_MST_FEC_BS_JITTER_WA(trans)	REG_BIT(0 + (trans) - TRANSCODER_A)
+
 #define CHICKEN_MISC_4		_MMIO(0x4208c)
 #define   CHICKEN_FBC_STRIDE_OVERRIDE	REG_BIT(13)
 #define   CHICKEN_FBC_STRIDE_MASK	REG_GENMASK(12, 0)
Signature · 1 line
2.39.2
#2 lore raw

Re: [PATCH 1/6] drm/i915/adlp: Add MST FEC BS jitter WA (Wa_14013163432)

Quoted 26 lines · Imre Deak

Add a workaround to fix BS (blank start) to BS jitter issues on MST links when FEC is enabled. Neither Bspec requires this nor Windows clears the WA when disabling the output - presumedly because CHICKEN_MISC_3 gets reset after disabling the pipe/transcoder - so follow suit.

Bspec: 50050, 55424

---
  drivers/gpu/drm/i915/display/intel_dp_mst.c | 24 +++++++++++++++++++++
  drivers/gpu/drm/i915/i915_reg.h             |  3 +++
  2 files changed, 27 insertions(+)
drivers/gpu/drm/i915/display/intel_dp_mst.c +4 -0
index 5fa25a5a36b55..22c1759f912db 100644
@@ -1106,6 +1106,28 @@ static void intel_mst_pre_enable_dp(struct intel_atomic_state *state,
  	intel_ddi_set_dp_msa(pipe_config, conn_state);
  }
 
+static void enable_bs_jitter_was(const struct intel_crtc_state *crtc_state)
+{
+	struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev);
+	u32 clear = 0;

drivers/gpu/drm/i915/display/intel_dp_mst.c static void intel_mst_pre_enable_dp(struct intel_atomic_state *state, · line 1122

Quoted 10 lines
drivers/gpu/drm/i915/display/intel_dp_mst.c +10 -0
+	u32 set = 0;
+
+	if (!IS_ALDERLAKE_P(i915))
+		return;
+
+	if (!IS_DISPLAY_STEP(i915, STEP_D0, STEP_FOREVER))
+		return;
+
+	/* Wa_14013163432:adlp */
+	if (crtc_state->fec_enable || intel_dp_is_uhbr(crtc_state))

Is this for DP MST + UHBR and DP MST + FEC?

From Bspec it seems this is meant only for MST+ FEC case, unless I am missing something.

Quoted 25 lines
drivers/gpu/drm/i915/display/intel_dp_mst.c +10 -0
+		set |= DP_MST_FEC_BS_JITTER_WA(crtc_state->cpu_transcoder);
+
+	if (!clear && !set)
+		return;
+
+	intel_de_rmw(i915, CHICKEN_MISC_3, clear, set);
+}
+
  static void intel_mst_enable_dp(struct intel_atomic_state *state,
  				struct intel_encoder *encoder,
  				const struct intel_crtc_state *pipe_config,
@@ -1134,6 +1156,8 @@ static void intel_mst_enable_dp(struct intel_atomic_state *state,
  			       TRANS_DP2_VFREQ_PIXEL_CLOCK(crtc_clock_hz & 0xffffff));
  	}
 
+	enable_bs_jitter_was(pipe_config);
+
  	intel_ddi_enable_transcoder_func(encoder, pipe_config);
 
  	clear_act_sent(encoder, pipe_config);
drivers/gpu/drm/i915/i915_reg.h +0 -0
index 75bc08081fce9..67b7d02ea37bf 100644

drivers/gpu/drm/i915/i915_reg.h line 4559

Quoted 5 lines
drivers/gpu/drm/i915/i915_reg.h +2 -0
@@ -4555,6 +4555,9 @@
  #define   GLK_CL1_PWR_DOWN		REG_BIT(11)
  #define   GLK_CL0_PWR_DOWN		REG_BIT(10)
 
+#define CHICKEN_MISC_3		_MMIO(0x42088)
+#define   DP_MST_FEC_BS_JITTER_WA(trans)	REG_BIT(0 + (trans) - TRANSCODER_A)

Should we mention /* adlp */ here?

Regards,

Ankit

Quoted 4 lines
drivers/gpu/drm/i915/i915_reg.h +1 -0
+
  #define CHICKEN_MISC_4		_MMIO(0x4208c)
  #define   CHICKEN_FBC_STRIDE_OVERRIDE	REG_BIT(13)
  #define   CHICKEN_FBC_STRIDE_MASK	REG_GENMASK(12, 0)
author
#3 lore raw

Re: [PATCH 1/6] drm/i915/adlp: Add MST FEC BS jitter WA (Wa_14013163432)

Quoted 40 lines · Ankit K
Quoted 25 lines · Imre Deak

Add a workaround to fix BS (blank start) to BS jitter issues on MST links when FEC is enabled. Neither Bspec requires this nor Windows clears the WA when disabling the output - presumedly because CHICKEN_MISC_3 gets reset after disabling the pipe/transcoder - so follow suit.

Bspec: 50050, 55424

---
  drivers/gpu/drm/i915/display/intel_dp_mst.c | 24 +++++++++++++++++++++
  drivers/gpu/drm/i915/i915_reg.h             |  3 +++
  2 files changed, 27 insertions(+)
drivers/gpu/drm/i915/display/intel_dp_mst.c +4 -0
index 5fa25a5a36b55..22c1759f912db 100644
@@ -1106,6 +1106,28 @@ static void intel_mst_pre_enable_dp(struct intel_atomic_state *state,
  	intel_ddi_set_dp_msa(pipe_config, conn_state);
  }
+static void enable_bs_jitter_was(const struct intel_crtc_state *crtc_state)
+{
+	struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev);
+	u32 clear = 0;

drivers/gpu/drm/i915/display/intel_dp_mst.c static void intel_mst_pre_enable_dp(struct intel_atomic_state *state, · line 1121

Quoted 10 lines
drivers/gpu/drm/i915/display/intel_dp_mst.c +10 -0
+	u32 set = 0;
+
+	if (!IS_ALDERLAKE_P(i915))
+		return;
+
+	if (!IS_DISPLAY_STEP(i915, STEP_D0, STEP_FOREVER))
+		return;
+
+	/* Wa_14013163432:adlp */
+	if (crtc_state->fec_enable || intel_dp_is_uhbr(crtc_state))

Is this for DP MST + UHBR and DP MST + FEC?

Quoted 2 lines

From Bspec it seems this is meant only for MST+ FEC case, unless I am missing something.

You mean not meant for UHBR? The register description is clearer than the modeset page, requiring it for both non-UHBR and UHBR. Windows also enables it for both.

Quoted 22 lines
Quoted 22 lines
drivers/gpu/drm/i915/display/intel_dp_mst.c +10 -0
+		set |= DP_MST_FEC_BS_JITTER_WA(crtc_state->cpu_transcoder);
+
+	if (!clear && !set)
+		return;
+
+	intel_de_rmw(i915, CHICKEN_MISC_3, clear, set);
+}
+
  static void intel_mst_enable_dp(struct intel_atomic_state *state,
  				struct intel_encoder *encoder,
  				const struct intel_crtc_state *pipe_config,
@@ -1134,6 +1156,8 @@ static void intel_mst_enable_dp(struct intel_atomic_state *state,
  			       TRANS_DP2_VFREQ_PIXEL_CLOCK(crtc_clock_hz & 0xffffff));
  	}
+	enable_bs_jitter_was(pipe_config);
+
  	intel_ddi_enable_transcoder_func(encoder, pipe_config);
  	clear_act_sent(encoder, pipe_config);
drivers/gpu/drm/i915/i915_reg.h +0 -0
index 75bc08081fce9..67b7d02ea37bf 100644
Quoted 8 lines

drivers/gpu/drm/i915/i915_reg.h line 4558

Quoted 5 lines
drivers/gpu/drm/i915/i915_reg.h +2 -0
@@ -4555,6 +4555,9 @@
  #define   GLK_CL1_PWR_DOWN		REG_BIT(11)
  #define   GLK_CL0_PWR_DOWN		REG_BIT(10)
+#define CHICKEN_MISC_3		_MMIO(0x42088)
+#define   DP_MST_FEC_BS_JITTER_WA(trans)	REG_BIT(0 + (trans) - TRANSCODER_A)

Should we mention /* adlp */ here?

In the register description the flag is valid for other platforms too, even though it's only enabled for ADLP/RPLP.

Quoted 8 lines

Regards,

Ankit

Quoted 4 lines
drivers/gpu/drm/i915/i915_reg.h +1 -0
+
  #define CHICKEN_MISC_4		_MMIO(0x4208c)
  #define   CHICKEN_FBC_STRIDE_OVERRIDE	REG_BIT(13)
  #define   CHICKEN_FBC_STRIDE_MASK	REG_GENMASK(12, 0)
Reviewed-by
#4 lore raw

Re: [PATCH 1/6] drm/i915/adlp: Add MST FEC BS jitter WA (Wa_14013163432)

Quoted 74 lines · Imre Deak
Quoted 38 lines · Ankit K
Quoted 25 lines · Imre Deak

Add a workaround to fix BS (blank start) to BS jitter issues on MST links when FEC is enabled. Neither Bspec requires this nor Windows clears the WA when disabling the output - presumedly because CHICKEN_MISC_3 gets reset after disabling the pipe/transcoder - so follow suit.

Bspec: 50050, 55424

---
   drivers/gpu/drm/i915/display/intel_dp_mst.c | 24 +++++++++++++++++++++
   drivers/gpu/drm/i915/i915_reg.h             |  3 +++
   2 files changed, 27 insertions(+)
drivers/gpu/drm/i915/display/intel_dp_mst.c +4 -0
index 5fa25a5a36b55..22c1759f912db 100644
@@ -1106,6 +1106,28 @@ static void intel_mst_pre_enable_dp(struct intel_atomic_state *state,
   	intel_ddi_set_dp_msa(pipe_config, conn_state);
   }
+static void enable_bs_jitter_was(const struct intel_crtc_state *crtc_state)
+{
+	struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev);
+	u32 clear = 0;

drivers/gpu/drm/i915/display/intel_dp_mst.c static void intel_mst_pre_enable_dp(struct intel_atomic_state *state, · line 1121

Quoted 10 lines
drivers/gpu/drm/i915/display/intel_dp_mst.c +10 -0
+	u32 set = 0;
+
+	if (!IS_ALDERLAKE_P(i915))
+		return;
+
+	if (!IS_DISPLAY_STEP(i915, STEP_D0, STEP_FOREVER))
+		return;
+
+	/* Wa_14013163432:adlp */
+	if (crtc_state->fec_enable || intel_dp_is_uhbr(crtc_state))

Is this for DP MST + UHBR and DP MST + FEC?

Quoted 2 lines

From Bspec it seems this is meant only for MST+ FEC case, unless I am
missing something.

You mean not meant for UHBR? The register description is clearer than the modeset page, requiring it for both non-UHBR and UHBR. Windows also enables it for both.

Quoted 21 lines
Quoted 21 lines
drivers/gpu/drm/i915/display/intel_dp_mst.c +10 -0
+		set |= DP_MST_FEC_BS_JITTER_WA(crtc_state->cpu_transcoder);
+
+	if (!clear && !set)
+		return;
+
+	intel_de_rmw(i915, CHICKEN_MISC_3, clear, set);
+}
+
   static void intel_mst_enable_dp(struct intel_atomic_state *state,
   				struct intel_encoder *encoder,
   				const struct intel_crtc_state *pipe_config,
@@ -1134,6 +1156,8 @@ static void intel_mst_enable_dp(struct intel_atomic_state *state,
   			       TRANS_DP2_VFREQ_PIXEL_CLOCK(crtc_clock_hz & 0xffffff));
   	}
+	enable_bs_jitter_was(pipe_config);
+
   	intel_ddi_enable_transcoder_func(encoder, pipe_config);
   	clear_act_sent(encoder, pipe_config);
drivers/gpu/drm/i915/i915_reg.h +0 -1
index 75bc08081fce9..67b7d02ea37bf 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
Quoted 8 lines

drivers/gpu/drm/i915/i915_reg.h line 4558

Quoted 6 lines

+++ b/drivers/gpu/drm/i915/i915_reg.h

drivers/gpu/drm/i915/i915_reg.h +2 -0
@@ -4555,6 +4555,9 @@
   #define   GLK_CL1_PWR_DOWN		REG_BIT(11)
   #define   GLK_CL0_PWR_DOWN		REG_BIT(10)
+#define CHICKEN_MISC_3		_MMIO(0x42088)
+#define   DP_MST_FEC_BS_JITTER_WA(trans)	REG_BIT(0 + (trans) - TRANSCODER_A)

Should we mention /* adlp */ here?

Quoted 2 lines

In the register description the flag is valid for other platforms too, even though it's only enabled for ADLP/RPLP.

Yes indeed.

Patch looks good to me.

Quoted 9 lines
Quoted 9 lines

Regards,

Ankit

Quoted 4 lines
drivers/gpu/drm/i915/i915_reg.h +1 -0
+
   #define CHICKEN_MISC_4		_MMIO(0x4208c)
   #define   CHICKEN_FBC_STRIDE_OVERRIDE	REG_BIT(13)
   #define   CHICKEN_FBC_STRIDE_MASK	REG_GENMASK(12, 0)
author
#5 lore raw

PATCH 2/6 drm/i915/adlp: Add MST short HBlank WA (Wa_14014143976)

In reply to Imre Deak

Add a workaround to fix BS jitter issues on MST links if the HBLANK period is less than 1 MTP. The WA applies only to UHBR rates while on non-UHBR the specification requires disabling it explicitly - presumedly because the register's reset value has the WA enabled.

Bspec: 50050, 55424

---
 drivers/gpu/drm/i915/display/intel_dp_mst.c | 8 ++++++++
 drivers/gpu/drm/i915/i915_reg.h             | 1 +
 2 files changed, 9 insertions(+)
drivers/gpu/drm/i915/display/intel_dp_mst.c +8 -0
index 22c1759f912db..23f3f7fab9d0b 100644
@@ -1122,6 +1122,14 @@ static void enable_bs_jitter_was(const struct intel_crtc_state *crtc_state)
 	if (crtc_state->fec_enable || intel_dp_is_uhbr(crtc_state))
 		set |= DP_MST_FEC_BS_JITTER_WA(crtc_state->cpu_transcoder);
 
+	/* Wa_14014143976:adlp */
+	if (IS_DISPLAY_STEP(i915, STEP_E0, STEP_FOREVER)) {
+		if (intel_dp_is_uhbr(crtc_state))
+			set |= DP_MST_SHORT_HBLANK_WA(crtc_state->cpu_transcoder);
+		else if (crtc_state->fec_enable)
+			clear |= DP_MST_SHORT_HBLANK_WA(crtc_state->cpu_transcoder);
+	}
+
 	if (!clear && !set)
 		return;
 
drivers/gpu/drm/i915/i915_reg.h +1 -0
index 67b7d02ea37bf..091edc1071e0e 100644
@@ -4556,6 +4556,7 @@
 #define   GLK_CL0_PWR_DOWN		REG_BIT(10)
 
 #define CHICKEN_MISC_3		_MMIO(0x42088)
+#define   DP_MST_SHORT_HBLANK_WA(trans)		REG_BIT(5 + (trans) - TRANSCODER_A)
 #define   DP_MST_FEC_BS_JITTER_WA(trans)	REG_BIT(0 + (trans) - TRANSCODER_A)
 
 #define CHICKEN_MISC_4		_MMIO(0x4208c)
Signature · 1 line
2.39.2
Reviewed-by on v1 2/6
#6 lore raw

Re: [PATCH 2/6] drm/i915/adlp: Add MST short HBlank WA (Wa_14014143976)

Quoted 8 lines · Imre Deak

Add a workaround to fix BS jitter issues on MST links if the HBLANK period is less than 1 MTP. The WA applies only to UHBR rates while on non-UHBR the specification requires disabling it explicitly - presumedly because the register's reset value has the WA enabled.

Bspec: 50050, 55424

LGTM.

Quoted 36 lines
---
  drivers/gpu/drm/i915/display/intel_dp_mst.c | 8 ++++++++
  drivers/gpu/drm/i915/i915_reg.h             | 1 +
  2 files changed, 9 insertions(+)
drivers/gpu/drm/i915/display/intel_dp_mst.c +8 -0
index 22c1759f912db..23f3f7fab9d0b 100644
@@ -1122,6 +1122,14 @@ static void enable_bs_jitter_was(const struct intel_crtc_state *crtc_state)
  	if (crtc_state->fec_enable || intel_dp_is_uhbr(crtc_state))
  		set |= DP_MST_FEC_BS_JITTER_WA(crtc_state->cpu_transcoder);
 
+	/* Wa_14014143976:adlp */
+	if (IS_DISPLAY_STEP(i915, STEP_E0, STEP_FOREVER)) {
+		if (intel_dp_is_uhbr(crtc_state))
+			set |= DP_MST_SHORT_HBLANK_WA(crtc_state->cpu_transcoder);
+		else if (crtc_state->fec_enable)
+			clear |= DP_MST_SHORT_HBLANK_WA(crtc_state->cpu_transcoder);
+	}
+
  	if (!clear && !set)
  		return;
 
drivers/gpu/drm/i915/i915_reg.h +1 -0
index 67b7d02ea37bf..091edc1071e0e 100644
@@ -4556,6 +4556,7 @@
  #define   GLK_CL0_PWR_DOWN		REG_BIT(10)
 
  #define CHICKEN_MISC_3		_MMIO(0x42088)
+#define   DP_MST_SHORT_HBLANK_WA(trans)		REG_BIT(5 + (trans) - TRANSCODER_A)
  #define   DP_MST_FEC_BS_JITTER_WA(trans)	REG_BIT(0 + (trans) - TRANSCODER_A)
 
  #define CHICKEN_MISC_4		_MMIO(0x4208c)
author
#7 lore raw

PATCH 3/6 drm/i915/adlp: Add DP MST DPT/DPTP alignment WA (Wa_14014143976)

In reply to Imre Deak

Add a workaround to fix BS-BS jitter issues on MST links, aligning DPT/DPTP MTPs.

Bspec: 50050, 55424

---
 drivers/gpu/drm/i915/display/intel_dp_mst.c | 3 +++
 drivers/gpu/drm/i915/i915_reg.h             | 1 +
 2 files changed, 4 insertions(+)
drivers/gpu/drm/i915/display/intel_dp_mst.c +3 -0
index 23f3f7fab9d0b..26c838ac9e411 100644
@@ -1128,6 +1128,9 @@ static void enable_bs_jitter_was(const struct intel_crtc_state *crtc_state)
 			set |= DP_MST_SHORT_HBLANK_WA(crtc_state->cpu_transcoder);
 		else if (crtc_state->fec_enable)
 			clear |= DP_MST_SHORT_HBLANK_WA(crtc_state->cpu_transcoder);
+
+		if (crtc_state->fec_enable || intel_dp_is_uhbr(crtc_state))
+			set |= DP_MST_DPT_DPTP_ALIGN_WA(crtc_state->cpu_transcoder);
 	}
 
 	if (!clear && !set)
drivers/gpu/drm/i915/i915_reg.h +1 -0
index 091edc1071e0e..eecbdecb8ed40 100644
@@ -4556,6 +4556,7 @@
 #define   GLK_CL0_PWR_DOWN		REG_BIT(10)
 
 #define CHICKEN_MISC_3		_MMIO(0x42088)
+#define   DP_MST_DPT_DPTP_ALIGN_WA(trans)	REG_BIT(9 + (trans) - TRANSCODER_A)
 #define   DP_MST_SHORT_HBLANK_WA(trans)		REG_BIT(5 + (trans) - TRANSCODER_A)
 #define   DP_MST_FEC_BS_JITTER_WA(trans)	REG_BIT(0 + (trans) - TRANSCODER_A)
 
Signature · 1 line
2.39.2
Reviewed-by on v1 3/6
#8 lore raw

Re: [PATCH 3/6] drm/i915/adlp: Add DP MST DPT/DPTP alignment WA (Wa_14014143976)

Quoted 6 lines · Imre Deak

Add a workaround to fix BS-BS jitter issues on MST links, aligning DPT/DPTP MTPs.

Bspec: 50050, 55424

LGTM.

As an aside, with these WAs do we also need to re-visit the transcoder Data M and N values.

There is a note too related to WA_14013163432 in intel_dp_mst_compute_m_n.

In any case this is,

Quoted 31 lines
---
  drivers/gpu/drm/i915/display/intel_dp_mst.c | 3 +++
  drivers/gpu/drm/i915/i915_reg.h             | 1 +
  2 files changed, 4 insertions(+)
drivers/gpu/drm/i915/display/intel_dp_mst.c +3 -0
index 23f3f7fab9d0b..26c838ac9e411 100644
@@ -1128,6 +1128,9 @@ static void enable_bs_jitter_was(const struct intel_crtc_state *crtc_state)
  			set |= DP_MST_SHORT_HBLANK_WA(crtc_state->cpu_transcoder);
  		else if (crtc_state->fec_enable)
  			clear |= DP_MST_SHORT_HBLANK_WA(crtc_state->cpu_transcoder);
+
+		if (crtc_state->fec_enable || intel_dp_is_uhbr(crtc_state))
+			set |= DP_MST_DPT_DPTP_ALIGN_WA(crtc_state->cpu_transcoder);
  	}
 
  	if (!clear && !set)
drivers/gpu/drm/i915/i915_reg.h +1 -0
index 091edc1071e0e..eecbdecb8ed40 100644
@@ -4556,6 +4556,7 @@
  #define   GLK_CL0_PWR_DOWN		REG_BIT(10)
 
  #define CHICKEN_MISC_3		_MMIO(0x42088)
+#define   DP_MST_DPT_DPTP_ALIGN_WA(trans)	REG_BIT(9 + (trans) - TRANSCODER_A)
  #define   DP_MST_SHORT_HBLANK_WA(trans)		REG_BIT(5 + (trans) - TRANSCODER_A)
  #define   DP_MST_FEC_BS_JITTER_WA(trans)	REG_BIT(0 + (trans) - TRANSCODER_A)
 
author
#9 lore raw

PATCH 4/6 drm/i915/adlp+: Add DSC early pixel count scaling WA (Wa_1409098942)

In reply to Imre Deak

Add a workaround to fix timing issues on links with DSC enabled - presumedly related to the audio functionality.

Bspec requires enabling this workaround if audio is enabled on ADLP, however Windows enables it whenever DSC is enabled ADLP onwards; follow Windows.

Bspec: 50490, 55424

---
 drivers/gpu/drm/i915/display/intel_display.c | 13 +++++++++++++
 drivers/gpu/drm/i915/i915_reg.h              |  3 +++
 2 files changed, 16 insertions(+)
drivers/gpu/drm/i915/display/intel_display.c +13 -0
index a92e959c8ac7b..0f4cd634d7dce 100644
@@ -435,6 +435,14 @@ void intel_enable_transcoder(const struct intel_crtc_state *new_crtc_state)
 		return;
 	}
 
+	/* Wa_1409098942: adlp+ */
+	if (DISPLAY_VER(dev_priv) >= 13 &&
+	    new_crtc_state->dsc.compression_enable) {
+		val &= ~TRANSCONF_PIXEL_COUNT_SCALING_MASK;
+		val |= REG_FIELD_PREP(TRANSCONF_PIXEL_COUNT_SCALING_MASK,
+				      TRANSCONF_PIXEL_COUNT_SCALING_X4);
+	}
+
 	intel_de_write(dev_priv, TRANSCONF(cpu_transcoder),
 		       val | TRANSCONF_ENABLE);
 	intel_de_posting_read(dev_priv, TRANSCONF(cpu_transcoder));
@@ -481,6 +489,11 @@ void intel_disable_transcoder(const struct intel_crtc_state *old_crtc_state)
 	if (!IS_I830(dev_priv))
 		val &= ~TRANSCONF_ENABLE;
 
+	/* Wa_1409098942: adlp+ */
+	if (DISPLAY_VER(dev_priv) >= 13 &&
+	    old_crtc_state->dsc.compression_enable)
+		val &= ~TRANSCONF_PIXEL_COUNT_SCALING_MASK;
+
 	intel_de_write(dev_priv, TRANSCONF(cpu_transcoder), val);
 
 	if (DISPLAY_VER(dev_priv) >= 12)
drivers/gpu/drm/i915/i915_reg.h +3 -0
index eecbdecb8ed40..b43d1145fa22f 100644
@@ -2588,6 +2588,9 @@
 #define   TRANSCONF_DITHER_TYPE_ST1		REG_FIELD_PREP(TRANSCONF_DITHER_TYPE_MASK, 1)
 #define   TRANSCONF_DITHER_TYPE_ST2		REG_FIELD_PREP(TRANSCONF_DITHER_TYPE_MASK, 2)
 #define   TRANSCONF_DITHER_TYPE_TEMP		REG_FIELD_PREP(TRANSCONF_DITHER_TYPE_MASK, 3)
+#define   TRANSCONF_PIXEL_COUNT_SCALING_MASK	REG_GENMASK(1, 0)
+#define   TRANSCONF_PIXEL_COUNT_SCALING_X4	1
+
 #define _PIPEASTAT		0x70024
 #define   PIPE_FIFO_UNDERRUN_STATUS		(1UL << 31)
 #define   SPRITE1_FLIP_DONE_INT_EN_VLV		(1UL << 30)
Signature · 1 line
2.39.2
Reviewed-by on v1 4/6
#10 lore raw

Re: [PATCH 4/6] drm/i915/adlp+: Add DSC early pixel count scaling WA (Wa_1409098942)

Quoted 35 lines · Imre Deak

Add a workaround to fix timing issues on links with DSC enabled - presumedly related to the audio functionality.

Bspec requires enabling this workaround if audio is enabled on ADLP, however Windows enables it whenever DSC is enabled ADLP onwards; follow Windows.

Bspec: 50490, 55424

---
  drivers/gpu/drm/i915/display/intel_display.c | 13 +++++++++++++
  drivers/gpu/drm/i915/i915_reg.h              |  3 +++
  2 files changed, 16 insertions(+)
drivers/gpu/drm/i915/display/intel_display.c +8 -0
index a92e959c8ac7b..0f4cd634d7dce 100644
@@ -435,6 +435,14 @@ void intel_enable_transcoder(const struct intel_crtc_state *new_crtc_state)
  		return;
  	}
 
+	/* Wa_1409098942: adlp+ */
+	if (DISPLAY_VER(dev_priv) >= 13 &&
+	    new_crtc_state->dsc.compression_enable) {
+		val &= ~TRANSCONF_PIXEL_COUNT_SCALING_MASK;
+		val |= REG_FIELD_PREP(TRANSCONF_PIXEL_COUNT_SCALING_MASK,
+				      TRANSCONF_PIXEL_COUNT_SCALING_X4);
+	}
+
  	intel_de_write(dev_priv, TRANSCONF(cpu_transcoder),
  		       val | TRANSCONF_ENABLE);
  	intel_de_posting_read(dev_priv, TRANSCONF(cpu_transcoder));

drivers/gpu/drm/i915/display/intel_display.c void intel_disable_transcoder(const struct intel_crtc_state *old_crtc_state) · line 492

Quoted 4 lines
drivers/gpu/drm/i915/display/intel_display.c +1 -0
@@ -481,6 +489,11 @@ void intel_disable_transcoder(const struct intel_crtc_state *old_crtc_state)
  	if (!IS_I830(dev_priv))
  		val &= ~TRANSCONF_ENABLE;
 
+	/* Wa_1409098942: adlp+ */

Nit pick: extra space before platform,  (not sure if it matters, tbh).

Patch looks good to me.

Quoted 21 lines
drivers/gpu/drm/i915/display/intel_display.c +4 -0
+	if (DISPLAY_VER(dev_priv) >= 13 &&
+	    old_crtc_state->dsc.compression_enable)
+		val &= ~TRANSCONF_PIXEL_COUNT_SCALING_MASK;
+
  	intel_de_write(dev_priv, TRANSCONF(cpu_transcoder), val);
 
  	if (DISPLAY_VER(dev_priv) >= 12)
drivers/gpu/drm/i915/i915_reg.h +3 -0
index eecbdecb8ed40..b43d1145fa22f 100644
@@ -2588,6 +2588,9 @@
  #define   TRANSCONF_DITHER_TYPE_ST1		REG_FIELD_PREP(TRANSCONF_DITHER_TYPE_MASK, 1)
  #define   TRANSCONF_DITHER_TYPE_ST2		REG_FIELD_PREP(TRANSCONF_DITHER_TYPE_MASK, 2)
  #define   TRANSCONF_DITHER_TYPE_TEMP		REG_FIELD_PREP(TRANSCONF_DITHER_TYPE_MASK, 3)
+#define   TRANSCONF_PIXEL_COUNT_SCALING_MASK	REG_GENMASK(1, 0)
+#define   TRANSCONF_PIXEL_COUNT_SCALING_X4	1
+
  #define _PIPEASTAT		0x70024
  #define   PIPE_FIFO_UNDERRUN_STATUS		(1UL << 31)
  #define   SPRITE1_FLIP_DONE_INT_EN_VLV		(1UL << 30)
author
#11 lore raw

PATCH 5/6 drm/i915/mtl+: Disable DP/DSC SF insertion at EOL WA

In reply to Imre Deak

Disable the workaround inserting an SF symbol between the last DSC EOC symbol and the subsequent BS symbol. The WA is enabled by default - based on the register's reset value - and Bspec requires disabling it explicitly. Bspec doesn't provide an actual WA ID for this.

Bspec: 50054, 65448, 68849

---
 drivers/gpu/drm/i915/display/intel_display.c | 9 +++++++++
 drivers/gpu/drm/i915/i915_reg.h              | 1 +
 2 files changed, 10 insertions(+)
drivers/gpu/drm/i915/display/intel_display.c +9 -0
index 0f4cd634d7dce..e0b75aa18ae33 100644
@@ -428,6 +428,15 @@ void intel_enable_transcoder(const struct intel_crtc_state *new_crtc_state)
 		intel_de_rmw(dev_priv, PIPE_ARB_CTL(pipe),
 			     0, PIPE_ARB_USE_PROG_SLOTS);
 
+	if (DISPLAY_VER(dev_priv) >= 14) {
+		u32 clear = DP_DSC_INSERT_SF_AT_EOL_WA;
+		u32 set = 0;
+
+		intel_de_rmw(dev_priv,
+			     hsw_chicken_trans_reg(dev_priv, cpu_transcoder),
+			     clear, set);
+	}
+
 	val = intel_de_read(dev_priv, TRANSCONF(cpu_transcoder));
 	if (val & TRANSCONF_ENABLE) {
 		/* we keep both pipes enabled on 830 */
drivers/gpu/drm/i915/i915_reg.h +1 -0
index b43d1145fa22f..9873daa16c6a1 100644
@@ -4620,6 +4620,7 @@
 #define   DDIE_TRAINING_OVERRIDE_VALUE	REG_BIT(16) /* CHICKEN_TRANS_A only */
 #define   PSR2_ADD_VERTICAL_LINE_COUNT	REG_BIT(15)
 #define   PSR2_VSC_ENABLE_PROG_HEADER	REG_BIT(12)
+#define   DP_DSC_INSERT_SF_AT_EOL_WA	REG_BIT(4)
 
 #define DISP_ARB_CTL	_MMIO(0x45000)
 #define   DISP_FBC_MEMORY_WAKE		REG_BIT(31)
Signature · 1 line
2.39.2
Reviewed-by on v1 5/6
#12 lore raw

Re: [PATCH 5/6] drm/i915/mtl+: Disable DP/DSC SF insertion at EOL WA

LGTM.

Quoted 45 lines · Imre Deak

Disable the workaround inserting an SF symbol between the last DSC EOC symbol and the subsequent BS symbol. The WA is enabled by default - based on the register's reset value - and Bspec requires disabling it explicitly. Bspec doesn't provide an actual WA ID for this.

Bspec: 50054, 65448, 68849

---
  drivers/gpu/drm/i915/display/intel_display.c | 9 +++++++++
  drivers/gpu/drm/i915/i915_reg.h              | 1 +
  2 files changed, 10 insertions(+)
drivers/gpu/drm/i915/display/intel_display.c +9 -0
index 0f4cd634d7dce..e0b75aa18ae33 100644
@@ -428,6 +428,15 @@ void intel_enable_transcoder(const struct intel_crtc_state *new_crtc_state)
  		intel_de_rmw(dev_priv, PIPE_ARB_CTL(pipe),
  			     0, PIPE_ARB_USE_PROG_SLOTS);
 
+	if (DISPLAY_VER(dev_priv) >= 14) {
+		u32 clear = DP_DSC_INSERT_SF_AT_EOL_WA;
+		u32 set = 0;
+
+		intel_de_rmw(dev_priv,
+			     hsw_chicken_trans_reg(dev_priv, cpu_transcoder),
+			     clear, set);
+	}
+
  	val = intel_de_read(dev_priv, TRANSCONF(cpu_transcoder));
  	if (val & TRANSCONF_ENABLE) {
  		/* we keep both pipes enabled on 830 */
drivers/gpu/drm/i915/i915_reg.h +1 -0
index b43d1145fa22f..9873daa16c6a1 100644
@@ -4620,6 +4620,7 @@
  #define   DDIE_TRAINING_OVERRIDE_VALUE	REG_BIT(16) /* CHICKEN_TRANS_A only */
  #define   PSR2_ADD_VERTICAL_LINE_COUNT	REG_BIT(15)
  #define   PSR2_VSC_ENABLE_PROG_HEADER	REG_BIT(12)
+#define   DP_DSC_INSERT_SF_AT_EOL_WA	REG_BIT(4)
 
  #define DISP_ARB_CTL	_MMIO(0x45000)
  #define   DISP_FBC_MEMORY_WAKE		REG_BIT(31)
author
#13 lore raw

PATCH 6/6 drm/i915/mtl: Add DP FEC BS jitter WA

In reply to Imre Deak

Add a workaround to fix BS (blank start) to BS jitter fixes on non-UHBR MST/FEC and UHBR links. Bspec doesn't provide an actual WA ID for this.

Bspec: 65448, 50054

---
 drivers/gpu/drm/i915/display/intel_display.c | 3 +++
 drivers/gpu/drm/i915/i915_reg.h              | 1 +
 2 files changed, 4 insertions(+)
drivers/gpu/drm/i915/display/intel_display.c +3 -0
index e0b75aa18ae33..72a852cccd3f3 100644
@@ -432,6 +432,9 @@ void intel_enable_transcoder(const struct intel_crtc_state *new_crtc_state)
 		u32 clear = DP_DSC_INSERT_SF_AT_EOL_WA;
 		u32 set = 0;
 
+		if (DISPLAY_VER(dev_priv) == 14)
+			set |= DP_FEC_BS_JITTER_WA;
+
 		intel_de_rmw(dev_priv,
 			     hsw_chicken_trans_reg(dev_priv, cpu_transcoder),
 			     clear, set);
drivers/gpu/drm/i915/i915_reg.h +1 -0
index 9873daa16c6a1..d86e904ffe893 100644
@@ -4619,6 +4619,7 @@
 #define   DDIE_TRAINING_OVERRIDE_ENABLE	REG_BIT(17) /* CHICKEN_TRANS_A only */
 #define   DDIE_TRAINING_OVERRIDE_VALUE	REG_BIT(16) /* CHICKEN_TRANS_A only */
 #define   PSR2_ADD_VERTICAL_LINE_COUNT	REG_BIT(15)
+#define   DP_FEC_BS_JITTER_WA		REG_BIT(15)
 #define   PSR2_VSC_ENABLE_PROG_HEADER	REG_BIT(12)
 #define   DP_DSC_INSERT_SF_AT_EOL_WA	REG_BIT(4)
 
Signature · 1 line
2.39.2
Reviewed-by on v1 6/6
#14 lore raw

Re: [PATCH 6/6] drm/i915/mtl: Add DP FEC BS jitter WA

Quoted 30 lines · Imre Deak

Add a workaround to fix BS (blank start) to BS jitter fixes on non-UHBR MST/FEC and UHBR links. Bspec doesn't provide an actual WA ID for this.

Bspec: 65448, 50054

---
  drivers/gpu/drm/i915/display/intel_display.c | 3 +++
  drivers/gpu/drm/i915/i915_reg.h              | 1 +
  2 files changed, 4 insertions(+)
drivers/gpu/drm/i915/display/intel_display.c +3 -0
index e0b75aa18ae33..72a852cccd3f3 100644
@@ -432,6 +432,9 @@ void intel_enable_transcoder(const struct intel_crtc_state *new_crtc_state)
  		u32 clear = DP_DSC_INSERT_SF_AT_EOL_WA;
  		u32 set = 0;
 
+		if (DISPLAY_VER(dev_priv) == 14)
+			set |= DP_FEC_BS_JITTER_WA;
+
  		intel_de_rmw(dev_priv,
  			     hsw_chicken_trans_reg(dev_priv, cpu_transcoder),
  			     clear, set);
drivers/gpu/drm/i915/i915_reg.h +0 -0
index 9873daa16c6a1..d86e904ffe893 100644

drivers/gpu/drm/i915/i915_reg.h line 4622

Quoted 4 lines
drivers/gpu/drm/i915/i915_reg.h +1 -0
@@ -4619,6 +4619,7 @@
  #define   DDIE_TRAINING_OVERRIDE_ENABLE	REG_BIT(17) /* CHICKEN_TRANS_A only */
  #define   DDIE_TRAINING_OVERRIDE_VALUE	REG_BIT(16) /* CHICKEN_TRANS_A only */
  #define   PSR2_ADD_VERTICAL_LINE_COUNT	REG_BIT(15)
+#define   DP_FEC_BS_JITTER_WA		REG_BIT(15)

Was wondering if this is for MTL+, but it seems this is required only for MTL.

Patch LGTM.

Quoted 3 lines
drivers/gpu/drm/i915/i915_reg.h +0 -0
  #define   PSR2_VSC_ENABLE_PROG_HEADER	REG_BIT(12)
  #define   DP_DSC_INSERT_SF_AT_EOL_WA	REG_BIT(4)
 
#15 lore raw

✓ Fi.CI.BAT: success for drm/i915/dp: Add jitter WAs for MST/FEC/DSC links

In reply to Imre Deak
== Series Details ==

== Series Details ==

Series: drm/i915/dp: Add jitter WAs for MST/FEC/DSC links
URL : https://patchwork.freedesktop.org/series/129277/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_14192 -> Patchwork_129277v1
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_129277v1/index.html

Participating hosts (37 -> 35)
------------------------------

Missing (2): bat-mtlp-8 fi-snb-2520m

Known issues
------------

Here are the changes found in Patchwork_129277v1 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@i915_hangman@error-state-basic:
- bat-mtlp-6: [PASS][1] -> [ABORT][2] ([i915#9414])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_14192/bat-mtlp-6/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_129277v1/bat-mtlp-6/igt@[email protected]

#### Possible fixes ####

* igt@i915_selftest@live@execlists:
- fi-bsw-nick: [ABORT][3] ([i915#7911]) -> [PASS][4]
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_14192/fi-bsw-nick/igt@i915_selftest@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_129277v1/fi-bsw-nick/igt@i915_selftest@[email protected]

* igt@i915_selftest@live@hangcheck:
- {bat-adls-6}: [DMESG-WARN][5] ([i915#5591]) -> [PASS][6]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_14192/bat-adls-6/igt@i915_selftest@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_129277v1/bat-adls-6/igt@i915_selftest@[email protected]

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[i915#5591]: https://gitlab.freedesktop.org/drm/intel/issues/5591
[i915#7911]: https://gitlab.freedesktop.org/drm/intel/issues/7911
[i915#9414]: https://gitlab.freedesktop.org/drm/intel/issues/9414

Build changes
-------------

* Linux: CI_DRM_14192 -> Patchwork_129277v1

CI-20190529: 20190529
CI_DRM_14192: f4c0dac89bd3cd02a1afe5e7a91ed4bf8de4afc6 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_7698: af750f5e7eaad98d40d8c924eb5f05e99d3c668b @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git
Patchwork_129277v1: f4c0dac89bd3cd02a1afe5e7a91ed4bf8de4afc6 @ git://anongit.freedesktop.org/gfx-ci/linux

### Linux commits

684e00785693 drm/i915/mtl: Add DP FEC BS jitter WA
4710e5a9e439 drm/i915/mtl+: Disable DP/DSC SF insertion at EOL WA f5853ef36adf drm/i915/adlp+: Add DSC early pixel count scaling WA (Wa_1409098942) 58b3ea4c8782 drm/i915/adlp: Add DP MST DPT/DPTP alignment WA (Wa_14014143976) a8501371285d drm/i915/adlp: Add MST short HBlank WA (Wa_14014143976) b689adcd3028 drm/i915/adlp: Add MST FEC BS jitter WA (Wa_14013163432)

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_129277v1/index.html

author
#16 lore raw

Re: ✓ Fi.CI.BAT: success for drm/i915/dp: Add jitter WAs for MST/FEC/DSC links

Quoted 5 lines · Patchwork

== Series Details ==

Series: drm/i915/dp: Add jitter WAs for MST/FEC/DSC links
URL : https://patchwork.freedesktop.org/series/129277/
State : success

Patchset is pushed to drm-intel-next, fixing the WA code comment in patch 4, thanks for the review.

Quoted 79 lines

== Summary ==

CI Bug Log - changes from CI_DRM_14192 -> Patchwork_129277v1
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_129277v1/index.html

Participating hosts (37 -> 35)
------------------------------

Missing (2): bat-mtlp-8 fi-snb-2520m

Known issues
------------

Here are the changes found in Patchwork_129277v1 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@i915_hangman@error-state-basic:
- bat-mtlp-6: [PASS][1] -> [ABORT][2] ([i915#9414])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_14192/bat-mtlp-6/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_129277v1/bat-mtlp-6/igt@[email protected]

#### Possible fixes ####

* igt@i915_selftest@live@execlists:
- fi-bsw-nick: [ABORT][3] ([i915#7911]) -> [PASS][4]
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_14192/fi-bsw-nick/igt@i915_selftest@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_129277v1/fi-bsw-nick/igt@i915_selftest@[email protected]

* igt@i915_selftest@live@hangcheck:
- {bat-adls-6}: [DMESG-WARN][5] ([i915#5591]) -> [PASS][6]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_14192/bat-adls-6/igt@i915_selftest@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_129277v1/bat-adls-6/igt@i915_selftest@[email protected]

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[i915#5591]: https://gitlab.freedesktop.org/drm/intel/issues/5591
[i915#7911]: https://gitlab.freedesktop.org/drm/intel/issues/7911
[i915#9414]: https://gitlab.freedesktop.org/drm/intel/issues/9414

Build changes
-------------

* Linux: CI_DRM_14192 -> Patchwork_129277v1

CI-20190529: 20190529
CI_DRM_14192: f4c0dac89bd3cd02a1afe5e7a91ed4bf8de4afc6 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_7698: af750f5e7eaad98d40d8c924eb5f05e99d3c668b @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git
Patchwork_129277v1: f4c0dac89bd3cd02a1afe5e7a91ed4bf8de4afc6 @ git://anongit.freedesktop.org/gfx-ci/linux

### Linux commits

684e00785693 drm/i915/mtl: Add DP FEC BS jitter WA
4710e5a9e439 drm/i915/mtl+: Disable DP/DSC SF insertion at EOL WA f5853ef36adf drm/i915/adlp+: Add DSC early pixel count scaling WA (Wa_1409098942) 58b3ea4c8782 drm/i915/adlp: Add DP MST DPT/DPTP alignment WA (Wa_14014143976) a8501371285d drm/i915/adlp: Add MST short HBlank WA (Wa_14014143976) b689adcd3028 drm/i915/adlp: Add MST FEC BS jitter WA (Wa_14013163432)

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_129277v1/index.html