dt-bindings: mmc: fsl-imx-esdhc: add iommus property
Subsystems (5)
Frank Li
maintainerPATCH 1/4 dt-bindings: mmc: fsl-imx-esdhc: add iommus property
iMX95 and iMX8QM have smmu. Add property "iommus".
--- Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml | 3 +++ 1 file changed, 3 insertions(+)
Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.yaml +3 -0
@@ -162,6 +162,9 @@ properties: - const: ahb - const: per + iommus: + maxItems: 1 + power-domains: maxItems: 1
Signature · 1 line
2.34.1
Frank Li
maintainerPATCH 2/4 dt-bindings: net: fec: add iommus property
iMX95 and iMX8QM have iommu. Add proerty 'iommus'.
--- Documentation/devicetree/bindings/net/fsl,fec.yaml | 3 +++ 1 file changed, 3 insertions(+)
Documentation/devicetree/bindings/net/fsl,fec.yaml +3 -0
@@ -224,6 +224,9 @@ properties: Can be omitted thus no delay is observed. Delay is in range of 1ms to 1000ms. Other delays are invalid. + iommus: + maxItems: 1 + required: - compatible - reg
Signature · 1 line
2.34.1
Wei Fang
maintainerRE: [PATCH 2/4] dt-bindings: net: fec: add iommus property
Quoted 12 lines
-----Original Message-----
From: Frank Li <[email protected]>
Sent: 2024年1月30日 5:19
To: [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]; dl-linux-imx <[email protected]>; Wei Fang <[email protected]>; Shenwei Wang <[email protected]>; Clark Wang <[email protected]>; [email protected]; [email protected]; [email protected]; [email protected]; [email protected]
Subject: [PATCH 2/4] dt-bindings: net: fec: add iommus property
Quoted 2 lines
iMX95 and iMX8QM have iommu. Add proerty 'iommus'.
i.MX95 does not have FEC port, so you should remove iMX95 from the commit message. :)
Re: [PATCH 2/4] dt-bindings: net: fec: add iommus property
In reply to Frank LiQuoted 6 lines · Frank Li
iMX95 and iMX8QM have iommu. Add proerty 'iommus'.
Signed-off-by Frank Li <[email protected]>--- Documentation/devicetree/bindings/net/fsl,fec.yaml | 3 +++ 1 file changed, 3 insertions(+)
That's a really random CC list... not even made public, but sending to some folks so only looking like a public posting.
Please use scripts/get_maintainers.pl to get a list of necessary people and lists to CC. It might happen, that command when run on an older kernel, gives you outdated entries. Therefore please be sure you base your patches on recent Linux kernel.
Tools like b4 or scripts_getmaintainer.pl provide you proper list of people, so fix your workflow. Tools might also fail if you work on some ancient tree (don't, use mainline), work on fork of kernel (don't, use mainline) or you ignore some maintainers (really don't). Just use b4 and everything should be fine, although remember about b4 prep --auto-to-cc if you added new patches to the patchset.
You missed at least devicetree list (maybe more), so this won't be tested by automated tooling. Performing review on untested code might be a waste of time, thus I will skip this patch entirely till you follow the process allowing the patch to be tested.
Best regards,
Krzysztof
Frank Li
maintainerPATCH 3/4 arm64: dts: imx8qm: add smmu node
In reply to Frank LiAdd smmu node for imx8qm.
--- arch/arm64/boot/dts/freescale/imx8qm.dtsi | 41 +++++++++++++++++++++++ 1 file changed, 41 insertions(+)
arch/arm64/boot/dts/freescale/imx8qm.dtsi +41 -0
@@ -265,6 +265,47 @@ timer { <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */ }; + smmu: iommu@51400000 { + compatible = "arm,mmu-500"; + interrupt-parent = <&gic>; + reg = <0 0x51400000 0 0x40000>; + #global-interrupts = <1>; + #iommu-cells = <2>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + }; + system-controller { compatible = "fsl,imx-scu"; mbox-names = "tx0",
Signature · 1 line
2.34.1
Frank Li
maintainerPATCH 4/4 arm64: dts: imx8qm: add smmu stream id information
In reply to Frank Li--- arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi | 6 ++++++ 1 file changed, 6 insertions(+)
arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi +6 -0
@@ -6,20 +6,26 @@ &fec1 { compatible = "fsl,imx8qm-fec", "fsl,imx6sx-fec"; + iommus = <&smmu 0x12 0x7f80>; }; &fec2 { compatible = "fsl,imx8qm-fec", "fsl,imx6sx-fec"; + iommus = <&smmu 0x12 0x7f80>; }; &usdhc1 { compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; + iommus = <&smmu 0x11 0x7f80>; }; &usdhc2 { compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; + iommus = <&smmu 0x11 0x7f80>; }; &usdhc3 { compatible = "fsl,imx8qm-usdhc", "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc"; + iommus = <&smmu 0x11 0x7f80>; }; +
Signature · 1 line
2.34.1