Skip to contentSkip to conversation

gcc-runtime: Move gdb pretty printer file to auto-load location

PATCH Superseded Khem Raj 2 participants 2 messages Jan 29, 2024 – Jan 30, 2024

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Khem Raj

author
#0 lore raw

PATCH 1/1 gcc-runtime: Move gdb pretty printer file to auto-load location

When debugging a C++ program on target using libcstdc++, gdb does not find the pretty printer python support, this is because the init file is installed into /usr/lib which is excluded from gdb's default list of directories to load config's from, where as defaults to load from datadir is still on, it therefore does not load this file

warning: File "/usr/lib/libstdc++.so.6.0.33-gdb.py" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".

This leaves the libstdc++ pretty-printers disabled even though added via IMAGE_INSTALL += "gcc-runtime-dbg"

Add missing runtime dependency on datetime python module for the pretty printer to work/load successfully.

Once the pretty-printer gdb file is moved out of libdir, it may become empty therefore delete it if its empty.

---
 meta/recipes-devtools/gcc/gcc-runtime.inc | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
meta/recipes-devtools/gcc/gcc-runtime.inc +8 -1
index 64b6168ba76..403ad76b5f2 100644
@@ -85,6 +85,8 @@ do_install () {
 		cd ${B}/${TARGET_SYS}/$d/
 		oe_runmake 'DESTDIR=${D}' MULTIBUILDTOP=${B}/${TARGET_SYS}/$d/ install
 	done
+	install -d ${D}${datadir}/gdb/auto-load/${libdir}
+	mv ${D}${libdir}/libstdc++.so.*-gdb.py ${D}${datadir}/gdb/auto-load/${libdir}
 	if [ -d ${D}${libdir}/gcc/${TARGET_SYS}/${BINV}/include ]; then
 		install -d ${D}${libdir}/${TARGET_SYS}/${BINV}/include 
 		mv ${D}${libdir}/gcc/${TARGET_SYS}/${BINV}/include/* ${D}${libdir}/${TARGET_SYS}/${BINV}/include
@@ -99,6 +101,9 @@ do_install () {
 	if [ -d ${D}${infodir} ]; then
 		rmdir --ignore-fail-on-non-empty -p ${D}${infodir}
 	fi
+	if [ -d ${D}${libdir} ]; then
+		rmdir --ignore-fail-on-non-empty -p ${D}${libdir}
+	fi
 }
 
 do_install:append:class-target () {
@@ -182,9 +187,11 @@ RRECOMMENDS:${PN}-dbg = ""
 
 # include python debugging scripts
 FILES:${PN}-dbg += "\
-    ${libdir}/libstdc++.*-gdb.py \
     ${datadir}/gcc-${BINV}/python/libstdcxx \
+    ${datadir}/gdb/auto-load \
 "
+# Needed by libstdcxx pretty printer
+RDEPENDS:${PN}-dbg += "python3-datetime"
 
 FILES:libg2c = "${target_libdir}/libg2c.so.*"
 SUMMARY:libg2c = "Companion runtime library for g77"
Signature · 1 line
2.43.0
#1 lore raw

This breaks on mingw:

https://autobuilder.yoctoproject.org/typhoon/#/builders/89/builds/8517/steps/12/logs/stdio

Quoted 71 lines · Khem Raj

When debugging a C++ program on target using libcstdc++, gdb does not find the pretty printer python support, this is because the init file is installed into /usr/lib which is excluded from gdb's default list of directories to load config's from, where as defaults to load from datadir is still on, it therefore does not load this file

warning: File "/usr/lib/libstdc++.so.6.0.33-gdb.py" auto-loading has been declined by your `auto-load safe-path' set to "$debugdir:$datadir/auto-load".

This leaves the libstdc++ pretty-printers disabled even though added via IMAGE_INSTALL += "gcc-runtime-dbg"

Add missing runtime dependency on datetime python module for the pretty printer to work/load successfully.

Once the pretty-printer gdb file is moved out of libdir, it may become empty therefore delete it if its empty.

---
 meta/recipes-devtools/gcc/gcc-runtime.inc | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
meta/recipes-devtools/gcc/gcc-runtime.inc +8 -1
index 64b6168ba76..403ad76b5f2 100644
@@ -85,6 +85,8 @@ do_install () {
 		cd ${B}/${TARGET_SYS}/$d/
 		oe_runmake 'DESTDIR=${D}' MULTIBUILDTOP=${B}/${TARGET_SYS}/$d/ install
 	done
+	install -d ${D}${datadir}/gdb/auto-load/${libdir}
+	mv ${D}${libdir}/libstdc++.so.*-gdb.py ${D}${datadir}/gdb/auto-load/${libdir}
 	if [ -d ${D}${libdir}/gcc/${TARGET_SYS}/${BINV}/include ]; then
 		install -d ${D}${libdir}/${TARGET_SYS}/${BINV}/include 
 		mv ${D}${libdir}/gcc/${TARGET_SYS}/${BINV}/include/* ${D}${libdir}/${TARGET_SYS}/${BINV}/include
@@ -99,6 +101,9 @@ do_install () {
 	if [ -d ${D}${infodir} ]; then
 		rmdir --ignore-fail-on-non-empty -p ${D}${infodir}
 	fi
+	if [ -d ${D}${libdir} ]; then
+		rmdir --ignore-fail-on-non-empty -p ${D}${libdir}
+	fi
 }
 
 do_install:append:class-target () {
@@ -182,9 +187,11 @@ RRECOMMENDS:${PN}-dbg = ""
 
 # include python debugging scripts
 FILES:${PN}-dbg += "\
-    ${libdir}/libstdc++.*-gdb.py \
     ${datadir}/gcc-${BINV}/python/libstdcxx \
+    ${datadir}/gdb/auto-load \
 "
+# Needed by libstdcxx pretty printer
+RDEPENDS:${PN}-dbg += "python3-datetime"
 
 FILES:libg2c = "${target_libdir}/libg2c.so.*"
 SUMMARY:libg2c = "Companion runtime library for g77"
Signature · 11 lines
2.43.0



-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#194483): https://lists.openembedded.org/g/openembedded-core/message/194483
Mute This Topic: https://lists.openembedded.org/mt/104038368/3617179
Group Owner: [email protected]
Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
Signature · 3 lines
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com