gs101 oriole: peripheral block 0 (peric0) fixes
Subsystems (5)
André Draszik
reviewerv2 cover gs101 oriole: peripheral block 0 (peric0) fixes
Hi,
While working on peric1, I've noticed a few issues in the peric0 area and these patches are the result. They should all be pretty self-explanatory.
Cheers,
Andre'
arch/arm64/boot/dts/exynos/google/gs101.dtsi | 11 ++++++----- drivers/clk/samsung/clk-gs101.c | 8 +++----- 2 files changed, 9 insertions(+), 10 deletions(-)
Changes in v2:
* new patch #6
- fix a typo in the commit messages of patches #3 and #5 (André)
- add some empty lines to commit messages (Sam)
- collect Reviewed-by: Tested-by: tags
André Draszik
reviewerPATCH v2 1/6 clk: samsung: gs101: gpio_peric0_pclk needs to be kept on
This pclk clock is required any time we access the pinctrl registers of this block.
Since pinctrl-samsung doesn't support a clock at the moment, we just keep the kernel from disabling it at boot, until we have an update for pinctrl-samsung to handle this required clock, at which point we'll be able to drop the flag again.
---
v2: collect Reviewed-by: tags
--- drivers/clk/samsung/clk-gs101.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/samsung/clk-gs101.c +1 -1
@@ -2848,7 +2848,7 @@ static const struct samsung_gate_clock peric0_gate_clks[] __initconst = {GATE (CLK_GOUT_PERIC0_GPIO_PERIC0_PCLK ,"gout_peric0_gpio_peric0_pclk" ,"mout_peric0_bus_user" ,CLK_CON_GAT_GOUT_BLK_PERIC0_UID_GPIO_PERIC0_IPCLKPORT_PCLK , -21 ,0 ,0 ), +21 ,CLK_IGNORE_UNUSED ,0 ),/* Disabling this clock makes the system hang. Mark the clock as critical. */ GATE(CLK_GOUT_PERIC0_LHM_AXI_P_PERIC0_I_CLK, "gout_peric0_lhm_axi_p_peric0_i_clk", "mout_peric0_bus_user",
Signature · 1 line
2.43.0.429.g432eaa2c6b-goog
Re: [PATCH v2 1/6] clk: samsung: gs101: gpio_peric0_pclk needs to be kept on
Quoted 9 lines · André Draszik
This pclk clock is required any time we access the pinctrl registers of this block.
Since pinctrl-samsung doesn't support a clock at the moment, we just keep the kernel from disabling it at boot, until we have an update for pinctrl-samsung to handle this required clock, at which point we'll be able to drop the flag again.
Fixes 893f133a040b ("clk: samsung: gs101: add support for cmu_peric0")
Dropped fixes tag. The driver looks correct, it's pinctrl issue.
I really dislike how these patches are inter-mixed with DTS. Makes applying difficult and confuses about dependencies.
I assume there are no dependencies here.
I am repeating this and repeating, but in future I will just reject the patches:
Your DTS and driver changes cannot depend on each other for new feature submissions.
Best regards,
Krzysztof
Krzysztof Kozlowski
AppliedRe: (subset) [PATCH v2 1/6] clk: samsung: gs101: gpio_peric0_pclk needs to be kept on
In reply to André DraszikQuoted 9 lines · André Draszik
This pclk clock is required any time we access the pinctrl registers of this block.
Since pinctrl-samsung doesn't support a clock at the moment, we just keep the kernel from disabling it at boot, until we have an update for pinctrl-samsung to handle this required clock, at which point we'll be able to drop the flag again.
[...]
Applied, thanks!
[1/6] clk: samsung: gs101: gpio_peric0_pclk needs to be kept on
https://git.kernel.org/krzk/linux/c/8a96d2701f7c794e45102a9cc7fc4a5c4951e699
Best regards,
Signature · 1 line
Krzysztof Kozlowski <[email protected]>
André Draszik
reviewerPATCH v2 2/6 arm64: dts: exynos: gs101: fix usi8 default mode
In reply to André DraszikWhile commit 6d44d1a1fb62 ("arm64: dts: exynos: gs101: define USI8 with I2C configuration") states that the USI8 CONFIG is 0 at reset, the boot loader has configured it by the time Linux runs and it has a different value at this stage.
Since we want board DTS files to explicitly select the mode, we should set it to none here so as to ensure things don't work by accident and to make it clear that board DTS actually need to set the mode based on the configuration.
---
v2: collect Reviewed-by: tags
--- arch/arm64/boot/dts/exynos/google/gs101.dtsi | 1 + 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/exynos/google/gs101.dtsi +1 -0
@@ -384,6 +384,7 @@ usi8: usi@109700c0 { <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7>; clock-names = "pclk", "ipclk"; samsung,sysreg = <&sysreg_peric0 0x101c>; + samsung,mode = <USI_V2_NONE>; status = "disabled"; hsi2c_8: i2c@10970000 {
Signature · 1 line
2.43.0.429.g432eaa2c6b-goog
Re: [PATCH v2 2/6] arm64: dts: exynos: gs101: fix usi8 default mode
Quoted 4 lines · André Draszik
While commit
6d44d1a1fb62("arm64: dts: exynos: gs101: define USI8 with I2C configuration") states that the USI8 CONFIG is 0 at reset, the boot loader has configured it by the time Linux runs and it has a different value at this stage.
This issue was pointed during review:
https://lore.kernel.org/all/CAPLW+4=U9DBmwgxyWz3cy=V-Ui7s2Z9um4xbEuyax1o=0zB_NA@mail.gmail.com/
Yet you posted new version of patchset not implementing this, just to do it week later as new patch.
Sorry guys, it seems you need much more time to accept and go through review, I will use two weeks delay time for applying GS patches.
Now, for the patch, we don't do it for any other nodes which have 0 as reset value and we do not know what bootloader does there. Bootloader also can change.
This is a required property, therefore please explain me how, really how, this can happen:
" we should
set it to none here so as to ensure things don't work by accident"
NAK
Best regards,
Krzysztof
André Draszik
reviewerPATCH v2 3/6 arm64: dts: exynos: gs101: use correct clocks for usi8
In reply to André DraszikWrong pclk clocks have been used in this usi8 instance here. For USI and I2C, we need the ipclk and pclk, where pclk is the bus clock. Without it, nothing can work.
It is unclear what exactly is using USI8_USI_CLK, but it is not required for the IP to be operational at this stage, while pclk is. This also brings the DT in line with the clock names expected by the usi and i2c drivers.
Update the DTSI accordingly.
---
v2:
* add an empty line to commit message
* collect Reviewed-by: Tested-by: tags
--- arch/arm64/boot/dts/exynos/google/gs101.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/exynos/google/gs101.dtsi +2 -2
@@ -380,7 +380,7 @@ usi8: usi@109700c0 { ranges; #address-cells = <1>; #size-cells = <1>; - clocks = <&cmu_peric0 CLK_GOUT_PERIC0_CLK_PERIC0_USI8_USI_CLK>, + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_7>, <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7>; clock-names = "pclk", "ipclk"; samsung,sysreg = <&sysreg_peric0 0x101c>;
@@ -397,7 +397,7 @@ hsi2c_8: i2c@10970000 { pinctrl-names = "default"; pinctrl-0 = <&hsi2c8_bus>; clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7>, - <&cmu_peric0 CLK_GOUT_PERIC0_CLK_PERIC0_USI8_USI_CLK>; + <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_7>; clock-names = "hsi2c", "hsi2c_pclk"; status = "disabled"; };
Signature · 1 line
2.43.0.429.g432eaa2c6b-goog
Krzysztof Kozlowski
AppliedRe: (subset) [PATCH v2 3/6] arm64: dts: exynos: gs101: use correct clocks for usi8
Quoted 10 lines · André Draszik
Wrong pclk clocks have been used in this usi8 instance here. For USI and I2C, we need the ipclk and pclk, where pclk is the bus clock. Without it, nothing can work.
It is unclear what exactly is using
USI8_USI_CLK, but it is not required for the IP to be operational at this stage, while pclk is. This also brings the DT in line with the clock names expected by the usi and i2c drivers.[...]
Applied, thanks!
[3/6] arm64: dts: exynos: gs101: use correct clocks for usi8
https://git.kernel.org/krzk/linux/c/512b5a875cd8b8352257fefe71513097ee97be77
Best regards,
Signature · 1 line
Krzysztof Kozlowski <[email protected]>
André Draszik
reviewerPATCH v2 4/6 arm64: dts: exynos: gs101: use correct clocks for usi_uart
In reply to André DraszikWrong pclk clocks have been used in this usi_uart instance here. For USI and UART, we need the ipclk and pclk, where pclk is the bus clock. Without it, nothing can work.
It is unclear what exactly is using USI0_UART_CLK, but it is not required for the IP to be operational at this stage, while pclk is. This also brings the DT in line with the clock names expected by the usi and uart drivers.
Update the DTSI accordingly.
---
v2:
* fix a typo in and add an empty line to the commit message
* collect Reviewed-by: Tested-by: tags
--- arch/arm64/boot/dts/exynos/google/gs101.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/exynos/google/gs101.dtsi +2 -2
@@ -410,7 +410,7 @@ usi_uart: usi@10a000c0 { ranges; #address-cells = <1>; #size-cells = <1>; - clocks = <&cmu_peric0 CLK_GOUT_PERIC0_CLK_PERIC0_USI0_UART_CLK>, + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_0>, <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0>; clock-names = "pclk", "ipclk"; samsung,sysreg = <&sysreg_peric0 0x1020>;
@@ -422,7 +422,7 @@ serial_0: serial@10a00000 { reg = <0x10a00000 0xc0>; interrupts = <GIC_SPI 634 IRQ_TYPE_LEVEL_HIGH 0>; - clocks = <&cmu_peric0 CLK_GOUT_PERIC0_CLK_PERIC0_USI0_UART_CLK>, + clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_0>, <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0>; clock-names = "uart", "clk_uart_baud0"; samsung,uart-fifosize = <256>;
Signature · 1 line
2.43.0.429.g432eaa2c6b-goog
Krzysztof Kozlowski
AppliedRe: (subset) [PATCH v2 4/6] arm64: dts: exynos: gs101: use correct clocks for usi_uart
Quoted 10 lines · André Draszik
Wrong pclk clocks have been used in this
usi_uartinstance here. For USI and UART, we need the ipclk and pclk, where pclk is the bus clock. Without it, nothing can work.It is unclear what exactly is using
USI0_UART_CLK, but it is not required for the IP to be operational at this stage, while pclk is. This also brings the DT in line with the clock names expected by the usi and uart drivers.[...]
Applied, thanks!
[4/6] arm64: dts: exynos: gs101: use correct clocks for usi_uart
https://git.kernel.org/krzk/linux/c/21e4e8807bfc7acc0fc9fe3ab69e1dc0662e7ce4
Best regards,
Signature · 1 line
Krzysztof Kozlowski <[email protected]>
André Draszik
reviewerPATCH v2 5/6 clk: samsung: gs101: don't mark non-essential clocks as critical
In reply to André DraszikThe peric0_top1_ipclk_0 and peric0_top1_pclk_0 are the clocks going to peric0/uart_usi, with pclk being the bus clock. Without pclk running, any bus access will hang.
Unfortunately, in commit d97b6c902a40 ("arm64: dts: exynos: gs101:
update USI UART to use peric0 clocks") the gs101 DT ended up specifying an incorrect pclk in the respective node and instead the two clocks here were marked as critical.
We have fixed the gs101 DT and can therefore drop this incorrect work-around here, the uart driver will claim these clocks as needed.
Note that this commit has the side-effect of causing earlycon to stop to work sometime into the boot for two reasons:
* peric0_top1_ipclk_0 requires its parent gout_cmu_peric0_ip to be running, but because earlycon doesn't deal with clocks that parent will be disabled when none of the other drivers that actually deal with clocks correctly require it to be running and the real serial driver (which does deal with clocks) hasn't taken over yet
* hand-over between earlycon and serial driver appears to be fragile and clocks get enabled and disabled a few times, which also causes register access to hang while earlycon is still active
Nonetheless we shouldn't keep these clocks running unconditionally just for earlycon. Clocks should be disabled where possible. If earlycon is required in the future, e.g. for debug, this commit can simply be reverted (locally!).
---
v2:
* collect Reviewed-by: tags
--- drivers/clk/samsung/clk-gs101.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
drivers/clk/samsung/clk-gs101.c +2 -4
@@ -2982,20 +2982,18 @@ static const struct samsung_gate_clock peric0_gate_clks[] __initconst = { "gout_peric0_peric0_top0_pclk_9", "mout_peric0_bus_user", CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP0_IPCLKPORT_PCLK_9, 21, 0, 0), -/* Disabling this clock makes the system hang. Mark the clock as critical. */ GATE (CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_0 ,"gout_peric0_peric0_top1_ipclk_0" ,"dout_peric0_usi0_uart" ,CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP1_IPCLKPORT_IPCLK_0 , -21 ,CLK_IS_CRITICAL ,0 ), +21 ,0 ,0 ),GATE (CLK_GOUT_PERIC0_PERIC0_TOP1_IPCLK_2 ,"gout_peric0_peric0_top1_ipclk_2" ,"dout_peric0_usi14_usi" ,CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP1_IPCLKPORT_IPCLK_2 ,21 ,0 ,0 ), -/* Disabling this clock makes the system hang. Mark the clock as critical. */ GATE (CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_0 ,"gout_peric0_peric0_top1_pclk_0" ,"mout_peric0_bus_user" ,CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP1_IPCLKPORT_PCLK_0 , -21 ,CLK_IS_CRITICAL ,0 ), +21 ,0 ,0 ), GATE(CLK_GOUT_PERIC0_PERIC0_TOP1_PCLK_2, "gout_peric0_peric0_top1_pclk_2", "mout_peric0_bus_user", CLK_CON_GAT_GOUT_BLK_PERIC0_UID_PERIC0_TOP1_IPCLKPORT_PCLK_2,
Signature · 1 line
2.43.0.429.g432eaa2c6b-goog
Re: [PATCH v2 5/6] clk: samsung: gs101: don't mark non-essential clocks as critical
Quoted 10 lines · André Draszik
The
peric0_top1_ipclk_0andperic0_top1_pclk_0are the clocks going to peric0/uart_usi, with pclk being the bus clock. Without pclk running, any bus access will hang.
Unfortunately, in commitd97b6c902a40("arm64: dts: exynos: gs101:
update USI UART to use peric0 clocks") the gs101 DT ended up specifying an incorrect pclk in the respective node and instead the two clocks here were marked as critical.We have fixed the gs101 DT and can therefore drop this incorrect work-around here, the uart driver will claim these clocks as needed.
How did you fixed the DTS? Which commit did it? Are we going back to basics of driver changes depending on DTS?
Best regards,
Krzysztof
André Draszik
reviewerRe: [PATCH v2 5/6] clk: samsung: gs101: don't mark non-essential clocks as critical
Hi Krzysztof,
Quoted 9 lines · Krzysztof Kozlowski
Quoted 8 lines · André Draszik
The
peric0_top1_ipclk_0andperic0_top1_pclk_0are the clocks going to peric0/uart_usi, with pclk being the bus clock. Without pclk running, any bus access will hang.
Unfortunately, in commitd97b6c902a40("arm64: dts: exynos: gs101:
update USI UART to use peric0 clocks") the gs101 DT ended up specifying an incorrect pclk in the respective node and instead the two clocks here were marked as critical.
Quoted 5 lines
Quoted 2 lines
We have fixed the gs101 DT and can therefore drop this incorrect work-around here, the uart driver will claim these clocks as needed.
How did you fixed the DTS? Which commit did it? Are we going back to basics of driver changes depending on DTS?
Sorry if the description isn't clear.
a) these clocks are not critical for the system to work, and this patch fixes that.
b) the initial DTSI for gs101 used incorrect clocks for the serial, and it didn't work. The work-around was to specify these clocks here as critical instead. Patch #4 in this series has corrected the DTSI.
So there is no dependency between the DTS update and the driver update here as such, no new properties, or otherwise.
That said, now that b) above has been fixed (in patch #4), it is OK to mark these clocks as non-critical without any ill effects. That's all that is happening. I was merely referencing that in the commit message.
I can rephrase things if you wish.
Cheers,
Andre'
André Draszik
reviewerPATCH v2 6/6 arm64: dts: exynos: gs101: reorder hsi2c_8 pinctrl-* properties
In reply to André DraszikThe preferred order for these is pinctrl-0 pinctrl-names.
Update the DTSI accordingly.
---
v2: new patch in this series
--- arch/arm64/boot/dts/exynos/google/gs101.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/exynos/google/gs101.dtsi +1 -1
@@ -394,8 +394,8 @@ hsi2c_8: i2c@10970000 { interrupts = <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; - pinctrl-names = "default"; pinctrl-0 = <&hsi2c8_bus>; + pinctrl-names = "default"; clocks = <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_IPCLK_7>, <&cmu_peric0 CLK_GOUT_PERIC0_PERIC0_TOP0_PCLK_7>; clock-names = "hsi2c", "hsi2c_pclk";
Signature · 1 line
2.43.0.429.g432eaa2c6b-goog
Re: [PATCH v2 6/6] arm64: dts: exynos: gs101: reorder hsi2c_8 pinctrl-* properties
Quoted 11 lines · André Draszik
The preferred order for these is pinctrl-0 pinctrl-names.
Update the DTSI accordingly.
Signed-off-by André Draszik <[email protected]>Suggested-by Sam Protsenko <[email protected]>---
v2: new patch in this series--- arch/arm64/boot/dts/exynos/google/gs101.dtsi | 2 +-
This is trivial cleanup, which is fine but then do it for entire Google GS DTSI and DTS, not only one case.
Best regards,
Krzysztof