arm64: dts: qcom: ipq8074: add clock-frequency to MDIO node
PATCH 1/1 arm64: dts: qcom: ipq8074: add clock-frequency to MDIO node
Add clock-frequency to MDIO node to set the MDC rate to 6.25Mhz instead of using the default value of 390KHz from MDIO default divider.
Signed-off-by Christian Marangi <[email protected]>
--- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 ++ 1 file changed, 2 insertions(+)
arch/arm64/boot/dts/qcom/ipq8074.dtsi +2 -0
@@ -264,6 +264,8 @@ mdio: mdio@90000 { clocks = <&gcc GCC_MDIO_AHB_CLK>; clock-names = "gcc_mdio_ahb_clk"; + clock-frequency = <6250000>; + status = "disabled"; };
Signature · 1 line
2.43.0
Quoted 5 lines · Christian Marangi
Add clock-frequency to MDIO node to set the MDC rate to 6.25Mhz instead of using the default value of 390KHz from MDIO default divider.
Signed-off-by Christian Marangi <[email protected]>---
Reviewed-by Konrad Dybcio <[email protected]>
Konrad
Quoted 4 lines · Christian Marangi
Add clock-frequency to MDIO node to set the MDC rate to 6.25Mhz instead of using the default value of 390KHz from MDIO default divider.
Applied, thanks!
[1/1] arm64: dts: qcom: ipq8074: add clock-frequency to MDIO node
commit: cb77d0ad460e2c97a00c02ed78afdf45476e5e5f
Best regards,
Signature · 1 line
Bjorn Andersson <[email protected]>