Skip to contentSkip to conversation

dt-bindings: misc: xlnx,sd-fec: convert bindings to yaml

PATCH Applied Dragan Cvetic 2 participants 2 messages Jan 31, 2024 – Feb 2, 2024

Subsystems (4)
lore
Share & tools
lore

Dragan Cvetic

author maintainer
#0 lore raw

PATCH v5 1/1 dt-bindings: misc: xlnx,sd-fec: convert bindings to yaml

Convert AMD (Xilinx) sd-fec bindings to yaml format, so it can validate dt-entries as well as any future additions to yaml.
Change in clocks is due to IP is itself configurable and only the first two clocks are in all combinations. The last 6 clocks can be present in some of them. It means order is not really fixed and any combination is possible.
Interrupt may or may not be present.
The documentation for sd-fec bindings is now YAML, so update the MAINTAINERS file.
Update the link to the new yaml file in xilinx_sdfec.rst.

---
Changes in v2:
---
Drop clocks description.
Use "contains:" with enum for optional clock-names and update comment explaining diference from the original DT binding file. Remove trailing full stops.
Add more details in sdfec-code description.
Set sdfec-code to "string" not "string-array"
---
Changes in v3:
Fix a mistake in example, set interrupt type to 0.
---
Changes in v4:
Set interrupt type to high level sensitive.
Remove '|' from descriptions, no need to preserve format. Remove not needed empty line.
---
Changes in v5:
Apply allOf to clock-names and put permanent clock items inside enum.

---
 .../devicetree/bindings/misc/xlnx,sd-fec.txt  |  58 --------
 .../devicetree/bindings/misc/xlnx,sd-fec.yaml | 140 ++++++++++++++++++
 Documentation/misc-devices/xilinx_sdfec.rst   |   2 +-
 MAINTAINERS                                   |   2 +-
 4 files changed, 142 insertions(+), 60 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt
 create mode 100644 Documentation/devicetree/bindings/misc/xlnx,sd-fec.yaml
Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt deleted +0 -58
deleted file mode 100644
index e3289634fa30..000000000000
@@ -1,58 +0,0 @@
-* Xilinx SDFEC(16nm) IP *
-
-The Soft Decision Forward Error Correction (SDFEC) Engine is a Hard IP block
-which provides high-throughput LDPC and Turbo Code implementations.
-The LDPC decode & encode functionality is capable of covering a range of
-customer specified Quasi-cyclic (QC) codes. The Turbo decode functionality
-principally covers codes used by LTE. The FEC Engine offers significant
-power and area savings versus implementations done in the FPGA fabric.
-
-
-Required properties:
-- compatible: Must be "xlnx,sd-fec-1.1"
-- clock-names : List of input clock names from the following:
-    - "core_clk", Main processing clock for processing core (required)
-    - "s_axi_aclk", AXI4-Lite memory-mapped slave interface clock (required)
-    - "s_axis_din_aclk", DIN AXI4-Stream Slave interface clock (optional)
-    - "s_axis_din_words-aclk", DIN_WORDS AXI4-Stream Slave interface clock (optional)
-    - "s_axis_ctrl_aclk",  Control input AXI4-Stream Slave interface clock (optional)
-    - "m_axis_dout_aclk", DOUT AXI4-Stream Master interface clock (optional)
-    - "m_axis_dout_words_aclk", DOUT_WORDS AXI4-Stream Master interface clock (optional)
-    - "m_axis_status_aclk", Status output AXI4-Stream Master interface clock (optional)
-- clocks : Clock phandles (see clock_bindings.txt for details).
-- reg: Should contain Xilinx SDFEC 16nm Hardened IP block registers
-  location and length.
-- xlnx,sdfec-code : Should contain "ldpc" or "turbo" to describe the codes
-  being used.
-- xlnx,sdfec-din-words : A value 0 indicates that the DIN_WORDS interface is
-  driven with a fixed value and is not present on the device, a value of 1
-  configures the DIN_WORDS to be block based, while a value of 2 configures the
-  DIN_WORDS input to be supplied for each AXI transaction.
-- xlnx,sdfec-din-width : Configures the DIN AXI stream where a value of 1
-  configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width
-  of "4x128b".
-- xlnx,sdfec-dout-words : A value 0 indicates that the DOUT_WORDS interface is
-  driven with a fixed value and is not present on the device, a value of 1
-  configures the DOUT_WORDS to be block based, while a value of 2 configures the
-  DOUT_WORDS input to be supplied for each AXI transaction.
-- xlnx,sdfec-dout-width : Configures the DOUT AXI stream where a value of 1
-  configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width
-  of "4x128b".
-Optional properties:
-- interrupts: should contain SDFEC interrupt number
-
-Example
----------------------------------------
-	sd_fec_0: sd-fec@a0040000 {
-		compatible = "xlnx,sd-fec-1.1";
-		clock-names = "core_clk","s_axi_aclk","s_axis_ctrl_aclk","s_axis_din_aclk","m_axis_status_aclk","m_axis_dout_aclk";
-		clocks = <&misc_clk_2>,<&misc_clk_0>,<&misc_clk_1>,<&misc_clk_1>,<&misc_clk_1>, <&misc_clk_1>;
-		reg = <0x0 0xa0040000 0x0 0x40000>;
-		interrupt-parent = <&axi_intc>;
-		interrupts = <1 0>;
-		xlnx,sdfec-code = "ldpc";
-		xlnx,sdfec-din-words = <0>;
-		xlnx,sdfec-din-width = <2>;
-		xlnx,sdfec-dout-words = <0>;
-		xlnx,sdfec-dout-width = <1>;
-	};
Documentation/devicetree/bindings/misc/xlnx,sd-fec.yaml new file +140 -0

140 lines not on this page · raw message

Documentation/misc-devices/xilinx_sdfec.rst +1 -1
index 8c8a289d69a3..698e6630f3a7 100644
@@ -29,7 +29,7 @@ follows:
   - Does not support shared LDPC code table wraparound
 
 The device tree entry is described in:
-`linux-xlnx/Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt <https://github.com/Xilinx/linux-xlnx/blob/master/Documentation/devicetree/bindings/misc/xlnx%2Csd-fec.txt>`_
+`linux-xlnx/Documentation/devicetree/bindings/misc/xlnx,sd-fec.yaml <https://github.com/Xilinx/linux-xlnx/blob/master/Documentation/devicetree/bindings/misc/xlnx%2Csd-fec.yaml>`_
 
 
 Modes of Operation
MAINTAINERS +1 -1
index 8999497011a2..d62e04322e19 100644
@@ -24157,7 +24157,7 @@ XILINX SD-FEC IP CORES
 M:	Derek Kiernan <[email protected]>
 M:	Dragan Cvetic <[email protected]>
 S:	Maintained
-F:	Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt
+F:	Documentation/devicetree/bindings/misc/xlnx,sd-fec.yaml
 F:	Documentation/misc-devices/xilinx_sdfec.rst
 F:	drivers/misc/Kconfig
 F:	drivers/misc/Makefile
Signature · 1 line
2.34.1
maintainer Applied
#1 lore raw
Quoted 33 lines · Dragan Cvetic

Convert AMD (Xilinx) sd-fec bindings to yaml format, so it can validate dt-entries as well as any future additions to yaml.
Change in clocks is due to IP is itself configurable and only the first two clocks are in all combinations. The last 6 clocks can be present in some of them. It means order is not really fixed and any combination is possible.
Interrupt may or may not be present.
The documentation for sd-fec bindings is now YAML, so update the MAINTAINERS file.
Update the link to the new yaml file in xilinx_sdfec.rst.

---
Changes in v2:
---
Drop clocks description.
Use "contains:" with enum for optional clock-names and update comment explaining diference from the original DT binding file. Remove trailing full stops.
Add more details in sdfec-code description.
Set sdfec-code to "string" not "string-array"
---
Changes in v3:
Fix a mistake in example, set interrupt type to 0.
---
Changes in v4:
Set interrupt type to high level sensitive.
Remove '|' from descriptions, no need to preserve format. Remove not needed empty line.
---
Changes in v5:
Apply allOf to clock-names and put permanent clock items inside enum.

Quoted 9 lines
---
 .../devicetree/bindings/misc/xlnx,sd-fec.txt  |  58 --------
 .../devicetree/bindings/misc/xlnx,sd-fec.yaml | 140 ++++++++++++++++++
 Documentation/misc-devices/xilinx_sdfec.rst   |   2 +-
 MAINTAINERS                                   |   2 +-
 4 files changed, 142 insertions(+), 60 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt
 create mode 100644 Documentation/devicetree/bindings/misc/xlnx,sd-fec.yaml

Applied, thanks!