[PATCH] USB: serial: option: add MeiG Smart SLM320 product

Aurélien Jacobs

author

2024-01-17 15:50 UTC #0 lore raw

PATCH 1/1 USB: serial: option: add MeiG Smart SLM320 product

Update the USB serial option driver to support MeiG Smart SLM320.

ID 2dee:4d41 UNISOC UNISOC-8910

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2dee ProdID=4d41 Rev=00.00
S: Manufacturer=UNISOC
S: Product=UNISOC-8910
C: #Ifs= 8 Cfg#= 1 Atr=e0 MxPwr=400mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Tested successfully a PPP LTE connection using If#= 0. Not sure of the purpose of every other serial interfaces.

Signed-off-by Aurélien Jacobs <[email protected]>

---
drivers/usb/serial/option.c | 6 ++++++

1 file changed, 6 insertions(+)

drivers/usb/serial/option.c +0 -0

index 72390dbf0769..b5468f51e0f8 100644
@@ -613,6 +613,11 @@ static void option_instat_callback(struct urb *urb);

/* Luat Air72*U series based on UNISOC UIS8910 uses UNISOC's vendor ID */
#define LUAT_PRODUCT_AIR720U 0x4e00

+/* MeiG Smart Technology products */
+#define MEIGSMART_VENDOR_ID 0x2dee
+/* MeiG Smart SLM320 based on UNISOC UIS8910 */
+#define MEIGSMART_PRODUCT_SLM320 0x4d41
+
/* Device flags */

/* Highest interface number which can be used with NCTRL() and RSVD() */ @@ -2281,6 +2286,7 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID,
SIERRA_PRODUCT_EM9191, 0xff, 0, 0) },
{ USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID,
TOZED_PRODUCT_LT70C, 0xff, 0, 0) },
{ USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID,
LUAT_PRODUCT_AIR720U, 0xff, 0, 0) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SLM320, 0xff, 0, 0) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);

Signature · 1 line

2.43.0

Johan Hovold

maintainer

2024-01-30 14:54 UTC #1 lore raw

Quoted 17 lines · Aurélien Jacobs

Update the USB serial option driver to support MeiG Smart SLM320.
ID 2dee:4d41 UNISOC UNISOC-8910
Tested successfully a PPP LTE connection using If#= 0. Not sure of the purpose of every other serial interfaces.
Signed-off-by Aurélien Jacobs <[email protected]>
---
 drivers/usb/serial/option.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/usb/serial/option.c +0 -0
index 72390dbf0769..b5468f51e0f8 100644

drivers/usb/serial/option.c static void option_instat_callback(struct urb · line 615

Quoted 3 lines

drivers/usb/serial/option.c +0 -0

@@ -613,6 +613,11 @@ static void option_instat_callback(struct urb 
 *urb);
 /* Luat Air72*U series based on UNISOC UIS8910 uses UNISOC's vendor ID 
 */

This patch appears to have been corrupted in transit (lines wrapped).

Please make sure you can send the patch to yourself (and apply it successfully) before resending.

Johan

Aurélien Jacobs

author

2024-01-31 17:56 UTC #2 lore raw

PATCH 1/1 USB: serial: option: add MeiG Smart SLM320 product

In reply to Aurélien Jacobs

Update the USB serial option driver to support MeiG Smart SLM320.

ID 2dee:4d41 UNISOC UNISOC-8910

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2dee ProdID=4d41 Rev=00.00
S: Manufacturer=UNISOC
S: Product=UNISOC-8910
C: #Ifs= 8 Cfg#= 1 Atr=e0 MxPwr=400mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Tested successfully a PPP LTE connection using If#= 0. Not sure of the purpose of every other serial interfaces.

Signed-off-by Aurélien Jacobs <[email protected]>

---
 drivers/usb/serial/option.c | 6 ++++++
 1 file changed, 6 insertions(+)

drivers/usb/serial/option.c +6 -0

index 72390dbf0769..b5468f51e0f8 100644
@@ -613,6 +613,11 @@ static void option_instat_callback(struct urb *urb);
 /* Luat Air72*U series based on UNISOC UIS8910 uses UNISOC's vendor ID */
 #define LUAT_PRODUCT_AIR720U			0x4e00
 
+/* MeiG Smart Technology products */
+#define MEIGSMART_VENDOR_ID			0x2dee
+/* MeiG Smart SLM320 based on UNISOC UIS8910 */
+#define MEIGSMART_PRODUCT_SLM320		0x4d41
+
 /* Device flags */
 
 /* Highest interface number which can be used with NCTRL() and RSVD() */

@@ -2281,6 +2286,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, TOZED_PRODUCT_LT70C, 0xff, 0, 0) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, LUAT_PRODUCT_AIR720U, 0xff, 0, 0) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(MEIGSMART_VENDOR_ID, MEIGSMART_PRODUCT_SLM320, 0xff, 0, 0) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);

Signature · 1 line

2.43.0

Johan Hovold

maintainer

2024-03-04 13:33 UTC #3 lore raw

Quoted 8 lines · Aurélien Jacobs

Update the USB serial option driver to support MeiG Smart SLM320.
ID 2dee:4d41 UNISOC UNISOC-8910
Tested successfully a PPP LTE connection using If#= 0. Not sure of the purpose of every other serial interfaces.
Signed-off-by Aurélien Jacobs <[email protected]>

Now applied, thanks.

Johan