phycore-imx8mp: Add USB support
Subsystems (2)
v3 cover phycore-imx8mp: Add USB support
add support for various USB features like USB storage, USB mass storage as well as booting and flashing emmc via UUU.
---
Changes in v3:
- add patch description for the sync with kernel devicetree commit
- Link to v2: https://lore.kernel.org/r/[email protected]
Changes in v2:
- sync kernel devicetree before making changes
- Link to v1: https://lore.kernel.org/r/[email protected]
---
Benjamin Hahn (4):
imx8mp-phyboard-pollux-rdk: sync with kernel devicetree from v6.8-rc2
phycore-imx8mp: add USB host support
phycore-imx8mp: add USB mass storage support
phycore-imx8mp: add support for booting and flashing emmc via UUU
.../arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi | 4 + arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts | 162 ++++++++++++++++++++- board/phytec/phycore_imx8mp/phycore-imx8mp.c | 4 + configs/phycore-imx8mp_defconfig | 33 ++++- include/configs/phycore_imx8mp.h | 5 + 5 files changed, 204 insertions(+), 4 deletions(-)
---
base-commit: 0101a2ffe125911ebf89172b495f5ff14f2fd058
change-id: 20240126-usb_support-403f47d71ac1
Best regards,
Signature · 1 line
Benjamin Hahn <[email protected]>
PATCH v3 1/4 imx8mp-phyboard-pollux-rdk: sync with kernel devicetree from v6.8-rc2
sync devicetree with kernel v6.8-rc2.
New commits on kernel v6.8-rc2:4a58fcdb1818 arm64: dts: imx8mp-phyboard-pollux: Add support for RS232/RS485 3bd7fdcc359e arm64: dts: imx8mp-phyboard-pollux: Add gpio-line-names f5faa633daf8 arm64: dts: imx8mp-phyboard-pollux: Enable USB support 27c0dc128d04 arm64: dts: imx8mp-phyboard-pollux: Add flexcan support fa2a1ec50456 arm64: dts: imx8mp-phyboard-pollux: Add missing usdhc clocks assignment 055e38c76388 arm64: dts: imx8mp-phyboard-pollux-rdk: Fix led sub-node names
--- arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts | 162 +++++++++++++++++++++++++++- 1 file changed, 159 insertions(+), 3 deletions(-)
arch/arm/dts/imx8mp-phyboard-pollux-rdk.dts +159 -3
@@ -19,6 +19,36 @@ stdout-path = &uart1; }; + reg_can1_stby: regulator-can1-stby { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1_reg>; + gpio = <&gpio3 20 GPIO_ACTIVE_LOW>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "can1-stby"; + }; + + reg_can2_stby: regulator-can2-stby { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2_reg>; + gpio = <&gpio3 21 GPIO_ACTIVE_LOW>; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "can2-stby"; + }; + + reg_usb1_vbus: regulator-usb1-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb1_vbus>; + gpio = <&gpio1 12 GPIO_ACTIVE_LOW>; + regulator-max-microvolt = <5000000>; + regulator-min-microvolt = <5000000>; + regulator-name = "usb1_host_vbus"; + }; + reg_usdhc2_vmmc: regulator-usdhc2 { compatible = "regulator-fixed"; pinctrl-names = "default";
@@ -57,6 +87,21 @@ }; }; +/* CAN FD */ +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can1_stby>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can2_stby>; + status = "okay"; +}; + &i2c2 { clock-frequency = <400000>; pinctrl-names = "default", "gpio";
@@ -76,15 +121,15 @@ compatible = "nxp,pca9533"; reg = <0x62>; - led1 { + led-1 { type = <PCA9532_TYPE_LED>; }; - led2 { + led-2 { type = <PCA9532_TYPE_LED>; }; - led3 { + led-3 { type = <PCA9532_TYPE_LED>; }; };
@@ -101,8 +146,51 @@ status = "okay"; }; +/* USB1 Host mode Type-A */ +&usb3_phy0 { + vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; + +&usb3_0 { + status = "okay"; +}; + +&usb_dwc3_0 { + dr_mode = "host"; + status = "okay"; +}; + +/* USB2 4-port USB3.0 HUB */ +&usb3_phy1 { + status = "okay"; +}; + +&usb3_1 { + fsl,permanently-attached; + fsl,disable-port-power-control; + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +/* RS232/RS485 */ +&uart2 { + assigned-clocks = <&clk IMX8MP_CLK_UART2>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + uart-has-rtscts; + status = "okay"; +}; + /* SD-Card */ &usdhc2 { + assigned-clocks = <&clk IMX8MP_CLK_USDHC2>; + assigned-clock-rates = <200000000>; pinctrl-names = "default", "state_100mhz", "state_200mhz"; pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_pins>; pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_pins>;
@@ -113,6 +201,33 @@ status = "okay"; }; +&gpio1 { + gpio-line-names = "", "", "X_PMIC_WDOG_B", "", + "PMIC_SD_VSEL", "", "", "", "", "", + "", "", "USB1_OTG_PWR", "", "", "X_nETHPHY_INT"; +}; + +&gpio2 { + gpio-line-names = "", "", "", "", + "", "", "", "", "", "", + "", "", "X_SD2_CD_B", "", "", "", + "", "", "", "SD2_RESET_B"; +}; + +&gpio3 { + gpio-line-names = "", "", "", "", + "", "", "", "", "", "", + "", "", "", "", "", "", + "", "", "", "", "nCAN1_EN", "nCAN2_EN"; +}; + +&gpio4 { + gpio-line-names = "", "", "", "", + "", "", "", "", "", "", + "", "", "", "", "", "", + "", "", "X_PMIC_IRQ_B", "", "nENET0_INT_PWDN"; +}; + &iomuxc { pinctrl_eqos: eqosgrp { fsl,pins = <
@@ -134,6 +249,32 @@ >; }; + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX 0x154 + MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX 0x154 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x154 + MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x154 + >; + }; + + pinctrl_flexcan1_reg: flexcan1reggrp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x154 + >; + }; + + pinctrl_flexcan2_reg: flexcan2reggrp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x154 + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c2
@@ -161,6 +302,21 @@ >; }; + pinctrl_usb1_vbus: usb1vbusgrp { + fsl,pins = < + MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x10 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140 + MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x140 + MX8MP_IOMUXC_SAI3_RXC__UART2_DCE_CTS 0x140 + MX8MP_IOMUXC_SAI3_RXD__UART2_DCE_RTS 0x140 + >; + }; + pinctrl_usdhc2_pins: usdhc2-gpiogrp { fsl,pins = < MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c4
Signature · 1 line
2.34.1
Re: [PATCH v3 1/4] imx8mp-phyboard-pollux-rdk: sync with kernel devicetree from v6.8-rc2
Quoted 11 lines · Benjamin Hahn
sync devicetree with kernel v6.8-rc2.
New commits on kernel v6.8-rc2:
4a58fcdb1818arm64: dts: imx8mp-phyboard-pollux: Add support for RS232/RS4853bd7fdcc359earm64: dts: imx8mp-phyboard-pollux: Add gpio-line-namesf5faa633daf8arm64: dts: imx8mp-phyboard-pollux: Enable USB support27c0dc128d04arm64: dts: imx8mp-phyboard-pollux: Add flexcan supportfa2a1ec50456arm64: dts: imx8mp-phyboard-pollux: Add missing usdhc clocks assignment055e38c76388arm64: dts: imx8mp-phyboard-pollux-rdk: Fix led sub-node names
Quoted 1 line
Signed-off-by Benjamin Hahn <[email protected]>
Applied all, thanks.
PATCH v3 2/4 phycore-imx8mp: add USB host support
In reply to Benjamin HahnThe phyBOARD Pollux has two USB ports. Add support for USB host and USB storage for the USB1 port.
--- configs/phycore-imx8mp_defconfig | 10 ++++++++++ 1 file changed, 10 insertions(+)
configs/phycore-imx8mp_defconfig +10 -0
@@ -65,6 +65,7 @@ CONFIG_CMD_FUSE=y CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y
@@ -104,6 +105,7 @@ CONFIG_DM_ETH_PHY=y CONFIG_FEC_MXC=y CONFIG_RGMII=y CONFIG_MII=y +CONFIG_PHY_IMX8MQ_USB=y CONFIG_PINCTRL=y CONFIG_SPL_PINCTRL=y CONFIG_PINCTRL_IMX8M=y
@@ -120,4 +122,12 @@ CONFIG_SPL_SYSRESET=y CONFIG_SYSRESET_PSCI=y CONFIG_SYSRESET_WATCHDOG=y CONFIG_DM_THERMAL=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_STORAGE=y CONFIG_IMX_WATCHDOG=y
Signature · 1 line
2.34.1
PATCH v3 3/4 phycore-imx8mp: add USB mass storage support
In reply to Benjamin Hahnadd support for USB mass storage to USB0 port of phyBOARD Pollux.
tested with "ums 0 mmc 2"
--- arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi | 4 ++++ configs/phycore-imx8mp_defconfig | 7 +++++++ 2 files changed, 11 insertions(+)
arch/arm/dts/imx8mp-phyboard-pollux-rdk-u-boot.dtsi +4 -0
@@ -70,6 +70,10 @@ bootph-pre-ram; }; +&usb_dwc3_0 { + dr_mode = "peripheral"; +}; + &usdhc2 { bootph-pre-ram; };
configs/phycore-imx8mp_defconfig +7 -0
@@ -66,6 +66,7 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y
@@ -123,6 +124,7 @@ CONFIG_SYSRESET_PSCI=y CONFIG_SYSRESET_WATCHDOG=y CONFIG_DM_THERMAL=y CONFIG_USB=y +CONFIG_DM_USB_GADGET=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_XHCI_DWC3_OF_SIMPLE=y
@@ -130,4 +132,9 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_DWC3=y CONFIG_USB_DWC3_GENERIC=y CONFIG_USB_STORAGE=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="FSL" +CONFIG_USB_GADGET_VENDOR_NUM=0x0525 +CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 +CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_IMX_WATCHDOG=y
Signature · 1 line
2.34.1
PATCH v3 4/4 phycore-imx8mp: add support for booting and flashing emmc via UUU
In reply to Benjamin Hahnadd support for Serial Downloader Boot via UUU as well as flashing emmc via UUU on USB0 Port of phyBOARD Pollux.
--- board/phytec/phycore_imx8mp/phycore-imx8mp.c | 4 ++++ configs/phycore-imx8mp_defconfig | 18 ++++++++++++++++-- include/configs/phycore_imx8mp.h | 5 +++++ 3 files changed, 25 insertions(+), 2 deletions(-)
board/phytec/phycore_imx8mp/phycore-imx8mp.c +4 -0
@@ -46,6 +46,10 @@ int board_late_init(void)case MMC3_BOOT :env_set_ulong ("mmcdev" ,2 );break ; +case USB_BOOT : +printf ("Detect USB boot. Will enter fastboot mode!\n" ); +env_set_ulong ("dofastboot" ,1 ); +break ;default :break ; }
configs/phycore-imx8mp_defconfig +16 -2
@@ -27,7 +27,7 @@ CONFIG_FIT_EXTERNAL_OFFSET=0x3000 CONFIG_SPL_LOAD_FIT=y CONFIG_OF_SYSTEM_SETUP=y CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadimage; then run mmcboot; else run netboot; fi; fi;" +CONFIG_BOOTCOMMAND="if test ${dofastboot} = 1; then fastboot 0; fi; mmc dev ${mmcdev}; if mmc rescan; then if run loadimage; then run mmcboot; else run netboot; fi; fi;" CONFIG_DEFAULT_FDT_FILE="oftree" CONFIG_SYS_CBSIZE=2048 CONFIG_SYS_PBSIZE=2074
@@ -66,6 +66,7 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y +CONFIG_CMD_USB_SDP=y CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y
@@ -87,6 +88,17 @@ CONFIG_NET_RANDOM_ETHADDR=y CONFIG_SPL_DM=y CONFIG_CLK_COMPOSITE_CCF=y CONFIG_CLK_IMX8MP=y +CONFIG_USB_FUNCTION_FASTBOOT=y +CONFIG_FASTBOOT_BUF_ADDR=0x42800000 +CONFIG_FASTBOOT_BUF_SIZE=0x13000000 +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_UUU_SUPPORT=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=2 +CONFIG_FASTBOOT_MMC_BOOT_SUPPORT=y +CONFIG_FASTBOOT_MMC_BOOT1_NAME="mmc2boot0" +CONFIG_FASTBOOT_MMC_BOOT2_NAME="mmc2boot1" +CONFIG_FASTBOOT_MMC_USER_SUPPORT=y +CONFIG_FASTBOOT_MMC_USER_NAME="mmc2" CONFIG_MXC_GPIO=y CONFIG_DM_I2C=y # CONFIG_SPL_DM_I2C is not set
@@ -111,6 +123,9 @@ CONFIG_PINCTRL=y CONFIG_SPL_PINCTRL=y CONFIG_PINCTRL_IMX8M=y CONFIG_SPL_POWER_LEGACY=y +CONFIG_POWER_DOMAIN=y +CONFIG_IMX8M_POWER_DOMAIN=y +CONFIG_IMX8MP_HSIOMIX_BLKCTRL=y CONFIG_POWER_PCA9450=y CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y
@@ -136,5 +151,4 @@ CONFIG_USB_GADGET=y CONFIG_USB_GADGET_MANUFACTURER="FSL" CONFIG_USB_GADGET_VENDOR_NUM=0x0525 CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 -CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_IMX_WATCHDOG=y
include/configs/phycore_imx8mp.h +5 -0
@@ -19,6 +19,11 @@"fdt_addr=0x48000000\0" \"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \"ip_dyn=yes\0" \ +"dofastboot=0\0" \ +"fastboot_raw_partition_bootloader=64 8128\0" \ +"fastboot_raw_partition_all=0 4194304\0" \ +"emmc_dev=2\0" \ +"sd_dev=1\0" \ "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \"mmcpart=1\0" \"mmcroot=2\0" \
Signature · 1 line
2.34.1