board/ti: k3 boards: Stop using findfdt
v3 cover board/ti: k3 boards: Stop using findfdt
This is a wide cleanup to switch to setting fdtfile using env_set instead of scripted magic. 'fdtfile' is expected to be set by default. This allows the stdboot triggered efi loaders to find the correct OS device tree file even if regular boot process is interrupted by user intervention.
Updates from V2:
* New patch #1 added for older omap platform build breakage (sorry about that)
Bootlogs (no change from V1): https://gist.github.com/nmenon/843e343cde645ec4aa57b60cece5256a
based on master 6faba41927bd Prepare v2024.04-rc1
NOTE: There are a couple of checkpatch WARN (around LATE_INIT) and CHECK (fdt_ops #ifdeffery) that on closer inspection looks fine and consistent with other similar usage.
V2: https://lore.kernel.org/all/[email protected]/
V1: https://lore.kernel.org/all/[email protected]/
Nishanth Menon (11):
board: ti: Add missing common/Kconfig references
board: ti: common: Introduce a common fdt ops library
board: ti: am62ax: Set fdtfile from C code instead of findfdt script
board: ti: am62x: Set fdtfile from C code instead of findfdt script
board: ti: am64x: Set fdtfile from C code instead of findfdt script
board: ti: am65x: Set fdtfile from C code instead of findfdt script
board: ti: j721e: Set fdtfile from C code instead of findfdt script
board: ti: j721s2: Set fdtfile from C code instead of findfdt script
board: beagle: beagleboneai64: Set fdtfile from C code instead of
findfdt script
board: beagle: beagleplay: Set fdtfile from C code instead of findfdt
script
include: env: ti: Drop default_findfdt
board/beagle/beagleboneai64/beagleboneai64.c | 14 ++++ .../beagle/beagleboneai64/beagleboneai64.env | 1 - board/beagle/beagleplay/beagleplay.c | 14 ++++ board/beagle/beagleplay/beagleplay.env | 1 - board/ti/am62ax/am62ax.env | 1 - board/ti/am62ax/evm.c | 10 +++ board/ti/am62x/am62x.env | 1 - board/ti/am62x/evm.c | 8 +++ board/ti/am64x/am64x.env | 9 --- board/ti/am64x/evm.c | 8 +++ board/ti/am65x/am65x.env | 3 - board/ti/am65x/evm.c | 2 + board/ti/common/Kconfig | 12 ++++ board/ti/common/Makefile | 1 + board/ti/common/fdt_ops.c | 64 +++++++++++++++++++ board/ti/common/fdt_ops.h | 42 ++++++++++++ board/ti/j721e/evm.c | 8 +++ board/ti/j721e/j721e.env | 10 --- board/ti/j721s2/evm.c | 8 +++ board/ti/j721s2/j721s2.env | 8 --- board/ti/omap3evm/Kconfig | 2 + board/ti/panda/Kconfig | 2 + board/ti/sdp4430/Kconfig | 2 + configs/am62ax_evm_a53_defconfig | 1 + configs/am62x_beagleplay_a53_defconfig | 3 +- configs/am62x_evm_a53_defconfig | 1 + configs/j721e_beagleboneai64_a72_defconfig | 3 +- include/env/ti/default_findfdt.env | 12 ---- 28 files changed, 203 insertions(+), 48 deletions(-) create mode 100644 board/ti/common/fdt_ops.c create mode 100644 board/ti/common/fdt_ops.h delete mode 100644 include/env/ti/default_findfdt.env
base-commit: 6faba41927bdc8973b59678649ef83c564cc421e
Signature · 1 line
2.43.0
PATCH v3 1/11 board: ti: Add missing common/Kconfig references
Add missing board/ti/common/Kconfig references for the platforms that missed it. The intent is for the common Kconfig to be usable across TI reference boards as required.
---
New patch:
Fixed build fail that Tom noted: https://lore.kernel.org/all/20240120163625.GA3665999@bill-the-cat/
board/ti/omap3evm/Kconfig | 2 ++ board/ti/panda/Kconfig | 2 ++ board/ti/sdp4430/Kconfig | 2 ++ 3 files changed, 6 insertions(+)
board/ti/omap3evm/Kconfig +2 -0
@@ -9,4 +9,6 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "omap3_evm" +source "board/ti/common/Kconfig" + endif
board/ti/panda/Kconfig +2 -0
@@ -9,4 +9,6 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "omap4_panda" +source "board/ti/common/Kconfig" + endif
board/ti/sdp4430/Kconfig +2 -0
@@ -12,4 +12,6 @@ config SYS_CONFIG_NAME config CMD_BAT bool "Enable board-specific battery command" +source "board/ti/common/Kconfig" + endif
Signature · 1 line
2.43.0
PATCH v3 2/11 board: ti: common: Introduce a common fdt ops library
In reply to Nishanth MenonIntroduce a common fdt operations library for basic device tree operations that are common between various boards.
The first library to introduce here is the capability to set up fdtfile as a standard variable as part of board identification rather than depend on scripted ifdeffery.
---
Changes in V3:
- none other than picking up reviews.
V2: https://lore.kernel.org/r/[email protected]
board/ti/common/Kconfig | 12 ++++++++ board/ti/common/Makefile | 1 + board/ti/common/fdt_ops.c | 64 +++++++++++++++++++++++++++++++++++++++ board/ti/common/fdt_ops.h | 42 +++++++++++++++++++++++++ 4 files changed, 119 insertions(+) create mode 100644 board/ti/common/fdt_ops.c create mode 100644 board/ti/common/fdt_ops.h
board/ti/common/Kconfig +12 -0
@@ -49,3 +49,15 @@ config TI_COMMON_CMD_OPTIONS imply CMD_SPI imply CMD_TIME imply CMD_USB if USB + +config TI_FDT_FOLDER_PATH + string "Location of Folder path where dtb is present" + default "ti/davinci" if ARCH_DAVINCI + default "ti/keystone" if ARCH_KEYSTONE + default "ti/omap" if ARCH_OMAP2PLUS + default "ti" if ARCH_K3 + depends on ARCH_DAVINCI || ARCH_KEYSTONE || ARCH_OMAP2PLUS || ARCH_K3 + help + Folder path for kernel device tree default. + This is used along with fdtfile path to locate the kernel + device tree blob.
board/ti/common/Makefile +1 -0
@@ -3,3 +3,4 @@ obj-${CONFIG_TI_I2C_BOARD_DETECT} += board_detect.o obj-${CONFIG_CMD_EXTENSION} += cape_detect.o +obj-${CONFIG_OF_LIBFDT} += fdt_ops.o
board/ti/common/fdt_ops.c new file +64 -0
64 lines not on this page · raw message
board/ti/common/fdt_ops.h new file +42 -0
42 lines not on this page · raw message
Signature · 1 line
2.43.0
PATCH v3 3/11 board: ti: am62ax: Set fdtfile from C code instead of findfdt script
In reply to Nishanth MenonStop using the findfdt script and switch to setting the fdtfile from C code.
While at this, replace findfdt in environment with a warning as it is no longer needed
---
Changes in V3:
- none other than picking up reviews.
V2: https://lore.kernel.org/r/[email protected]
board/ti/am62ax/am62ax.env | 1 - board/ti/am62ax/evm.c | 10 ++++++++++ configs/am62ax_evm_a53_defconfig | 1 + 3 files changed, 11 insertions(+), 1 deletion(-)
board/ti/am62ax/am62ax.env +0 -1
@@ -1,5 +1,4 @@ #include <env/ti/ti_common.env> -#include <env/ti/default_findfdt.env> #include <env/ti/mmc.env> name_kern=Image
board/ti/am62ax/evm.c +10 -0
@@ -13,6 +13,8 @@#include <fdt_support.h> #include <spl.h> +#include "../common/fdt_ops.h" +int board_init (void ) {return 0 ;
@@ -27,3 +29,11 @@ int dram_init_banksize(void) {return fdtdec_setup_memory_banksize (); } + +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init (void ) +{ +ti_set_fdt_env (NULL ,NULL ); +return 0 ; +} +#endif
configs/am62ax_evm_a53_defconfig +1 -0
@@ -24,6 +24,7 @@ CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000 CONFIG_BOOTSTD_FULL=y CONFIG_BOOTSTD_DEFAULTS=y CONFIG_BOOTCOMMAND="run envboot; bootflow scan -lb" +CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_MAX_SIZE=0x58000 CONFIG_SPL_PAD_TO=0x0 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
Signature · 1 line
2.43.0
PATCH v3 4/11 board: ti: am62x: Set fdtfile from C code instead of findfdt script
In reply to Nishanth MenonStop using the findfdt script and switch to setting the fdtfile from C code.
While at this, replace findfdt in environment with a warning as it is no longer needed
---
Changes in V3:
- none other than picking up reviews.
V2: https://lore.kernel.org/r/[email protected]
board/ti/am62x/am62x.env | 1 - board/ti/am62x/evm.c | 8 ++++++++ configs/am62x_evm_a53_defconfig | 1 + 3 files changed, 9 insertions(+), 1 deletion(-)
board/ti/am62x/am62x.env +0 -1
@@ -1,5 +1,4 @@ #include <env/ti/ti_common.env> -#include <env/ti/default_findfdt.env> #include <env/ti/mmc.env> name_kern=Image
board/ti/am62x/evm.c +8 -0
@@ -54,6 +54,14 @@ int dram_init(void)return fdtdec_setup_mem_size_base (); } +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init (void ) +{ +ti_set_fdt_env (NULL ,NULL ); +return 0 ; +} +#endif +int dram_init_banksize (void ) {return fdtdec_setup_memory_banksize ();
configs/am62x_evm_a53_defconfig +1 -0
@@ -32,6 +32,7 @@ CONFIG_BOOTSTD_FULL=y CONFIG_BOOTSTD_DEFAULTS=y CONFIG_SYS_BOOTM_LEN=0x800000 CONFIG_BOOTCOMMAND="run envboot; bootflow scan -lb" +CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_MAX_SIZE=0x58000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x80c80000
Signature · 1 line
2.43.0
Re: [PATCH V3 04/11] board: ti: am62x: Set fdtfile from C code instead of findfdt script
Quoted 13 lines · Nishanth Menon
Stop using the findfdt script and switch to setting the fdtfile from C code.
While at this, replace findfdt in environment with a warning as it is no longer needed
Reviewed-by Jonathan Humphreys <[email protected]>Reviewed-by Roger Quadros <[email protected]>Signed-off-by Nishanth Menon <[email protected]>---
Changes in V3:
- none other than picking up reviews.
Quoted 6 lines
V2: https://lore.kernel.org/r/[email protected]
board/ti/am62x/am62x.env | 1 - board/ti/am62x/evm.c | 8 ++++++++ configs/am62x_evm_a53_defconfig | 1 + 3 files changed, 9 insertions(+), 1 deletion(-)
This introduces:
+(am62x_evm_a53) board/ti/am62x/evm.c: In function 'board_late_init':
+(am62x_evm_a53) board/ti/am62x/evm.c:60:9: error: implicit declaration of function 'ti_set_fdt_env' [-Werror=implicit-function-declaration]
+(am62x_evm_a53) 60 | ti_set_fdt_env(NULL, NULL); +(am62x_evm_a53) | ^~~~~~~~~~~~~~
+(am62x_evm_a53) cc1: all warnings being treated as errors +(am62x_evm_a53) make[2]: *** [scripts/Makefile.build:257: board/ti/am62x/evm.o] Error 1 +(am62x_evm_a53) make[1]: *** [Makefile:1859: board/ti/am62x] Error 2 +(am62x_evm_a53) make: *** [Makefile:177: sub-make] Error 2
Signature · 1 line
Tom
PATCH v3 5/11 board: ti: am64x: Set fdtfile from C code instead of findfdt script
In reply to Nishanth MenonWe now can provide a map and have the standard fdtfile variable set from code itself. This allows for bootstd to "just work".
While at this, replace findfdt in environment with a warning as it is no longer needed.
---
Changes in V3:
- none other than picking up reviews.
V2: https://lore.kernel.org/r/[email protected]
board/ti/am64x/am64x.env | 9 --------- board/ti/am64x/evm.c | 8 ++++++++ 2 files changed, 8 insertions(+), 9 deletions(-)
board/ti/am64x/am64x.env +0 -9
@@ -2,14 +2,6 @@ #include <env/ti/mmc.env> #include <env/ti/k3_dfu.env> -findfdt= - if test $board_name = am64x_gpevm; then - setenv name_fdt ti/k3-am642-evm.dtb; fi; - if test $board_name = am64x_skevm; then - setenv name_fdt ti/k3-am642-sk.dtb; fi; - if test $name_fdt = undefined; then - echo WARNING: Could not determine device tree to use; fi; - setenv fdtfile ${name_fdt} name_kern=Image console=ttyS2,115200n8 args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 ${mtdparts}
@@ -43,7 +35,6 @@ get_fit_usb=load usb ${bootpart} ${addr_fit} usbboot=setenv boot usb; setenv bootpart 0:2; usb start; - run findfdt; run init_usb; run get_kern_usb; run get_fdt_usb;
board/ti/am64x/evm.c +8 -0
@@ -16,6 +16,7 @@#include <env.h> #include "../common/board_detect.h" +#include "../common/fdt_ops.h" #define board_is_am64x_gpevm () (board_ti_k3_is("AM64-GPEVM") || \ board_ti_k3_is("AM64-EVM") || \
@@ -181,6 +182,12 @@ int checkboard(void) }#ifdef CONFIG_BOARD_LATE_INIT +static struct ti_fdt_map ti_am64_evm_fdt_map[] = { + {"am64x_gpevm" ,"k3-am642-evm.dtb" }, + {"am64x_skevm" ,"k3-am642-sk.dtb" }, + {/* Sentinel. */ } +}; +static void setup_board_eeprom_env (void ) {char *name ="am64x_gpevm" ;
@@ -198,6 +205,7 @@ static void setup_board_eeprom_env(void) invalid_eeprom:set_board_info_env_am6 (name); +ti_set_fdt_env (name, ti_am64_evm_fdt_map); }static void setup_serial (void )
Signature · 1 line
2.43.0
PATCH v3 6/11 board: ti: am65x: Set fdtfile from C code instead of findfdt script
In reply to Nishanth MenonWe now can provide a map and have the standard fdtfile variable set from code itself. This allows for bootstd to "just work".
While at this, replace findfdt in environment with a warning as it is no longer needed.
---
Changes in V3:
- none other than picking up reviews.
V2: https://lore.kernel.org/r/[email protected]
board/ti/am65x/am65x.env | 3 --- board/ti/am65x/evm.c | 2 ++ 2 files changed, 2 insertions(+), 3 deletions(-)
board/ti/am65x/am65x.env +0 -3
@@ -5,9 +5,6 @@ #include <env/ti/k3_rproc.env> #endif -findfdt= - setenv name_fdt ti/k3-am654-base-board.dtb; - setenv fdtfile ${name_fdt} name_kern=Image console=ttyS2,115200n8 args_all=setenv optargs ${optargs} earlycon=ns16550a,mmio32,0x02800000
board/ti/am65x/evm.c +2 -0
@@ -22,6 +22,7 @@#include <linux/printk.h> #include "../common/board_detect.h" +#include "../common/fdt_ops.h" #define board_is_am65x_base_board () board_ti_is("AM6-COMPROCEVM")
@@ -141,6 +142,7 @@ static void setup_board_eeprom_env(void) invalid_eeprom:set_board_info_env_am6 (name); +ti_set_fdt_env (NULL ,NULL ); }static int init_daughtercard_det_gpio (char *gpio_name,struct gpio_desc *desc)
Signature · 1 line
2.43.0
PATCH v3 7/11 board: ti: j721e: Set fdtfile from C code instead of findfdt script
In reply to Nishanth MenonWe now can provide a map and have the standard fdtfile variable set from code itself. This allows for bootstd to "just work".
While at this, replace findfdt in environment with a warning as it is no longer needed.
---
Changes in V3:
- none other than picking up reviews.
V2: https://lore.kernel.org/r/[email protected]
board/ti/j721e/evm.c | 8 ++++++++ board/ti/j721e/j721e.env | 10 ---------- 2 files changed, 8 insertions(+), 10 deletions(-)
board/ti/j721e/evm.c +8 -0
@@ -16,6 +16,7 @@#include <dm.h> #include "../common/board_detect.h" +#include "../common/fdt_ops.h" #define board_is_j721e_som () (board_ti_k3_is("J721EX-PM1-SOM") || \ board_ti_k3_is("J721EX-PM2-SOM"))
@@ -353,6 +354,12 @@ static int probe_daughtercards(void)#endif #ifdef CONFIG_BOARD_LATE_INIT +static struct ti_fdt_map ti_j721e_evm_fdt_map[] = { + {"j721e" ,"k3-j721e-common-proc-board.dtb" }, + {"j721e-sk" ,"k3-j721e-sk.dtb" }, + {"j7200" ,"k3-j7200-common-proc-board.dtb" }, + {/* Sentinel. */ } +};static void setup_board_eeprom_env (void ) {char *name ="j721e" ;
@@ -372,6 +379,7 @@ static void setup_board_eeprom_env(void) invalid_eeprom:set_board_info_env_am6 (name); +ti_set_fdt_env (name, ti_j721e_evm_fdt_map); }static void setup_serial (void )
board/ti/j721e/j721e.env +0 -10
@@ -7,16 +7,6 @@ #include <env/ti/k3_rproc.env> #endif -default_device_tree=ti/k3-j721e-common-proc-board.dtb -findfdt= - setenv name_fdt ${default_device_tree}; - if test $board_name = j721e; then - setenv name_fdt ti/k3-j721e-common-proc-board.dtb; fi; - if test $board_name = j7200; then - setenv name_fdt ti/k3-j7200-common-proc-board.dtb; fi; - if test $board_name = j721e-eaik || test $board_name = j721e-sk; then - setenv name_fdt ti/k3-j721e-sk.dtb; fi; - setenv fdtfile ${name_fdt} name_kern=Image console=ttyS2,115200n8 args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000
Signature · 1 line
2.43.0
PATCH v3 8/11 board: ti: j721s2: Set fdtfile from C code instead of findfdt script
In reply to Nishanth MenonWe now can provide a map and have the standard fdtfile variable set from code itself. This allows for bootstd to "just work".
While at this, replace findfdt in environment with a warning as it is no longer needed.
---
Changes in V3:
- none other than picking up reviews.
V2: https://lore.kernel.org/r/[email protected]
board/ti/j721s2/evm.c | 8 ++++++++ board/ti/j721s2/j721s2.env | 8 -------- 2 files changed, 8 insertions(+), 8 deletions(-)
board/ti/j721s2/evm.c +8 -0
@@ -23,6 +23,7 @@#include <dm/root.h> #include "../common/board_detect.h" +#include "../common/fdt_ops.h" DECLARE_GLOBAL_DATA_PTR ;
@@ -114,6 +115,12 @@ int checkboard(void)return 0 ; } +static struct ti_fdt_map ti_j721s2_evm_fdt_map[] = { + {"j721s2" ,"k3-j721s2-common-proc-board.dtb" }, + {"am68-sk" ,"k3-am68-sk-base-board.dtb" }, + {/* Sentinel. */ } +}; +static void setup_board_eeprom_env (void ) {char *name ="j721s2" ;
@@ -131,6 +138,7 @@ static void setup_board_eeprom_env(void) invalid_eeprom:set_board_info_env_am6 (name); +ti_set_fdt_env (name, ti_j721s2_evm_fdt_map); }static void setup_serial (void )
board/ti/j721s2/j721s2.env +0 -8
@@ -7,14 +7,6 @@ #include <env/ti/k3_rproc.env> #endif -default_device_tree=ti/k3-j721s2-common-proc-board.dtb -findfdt= - setenv name_fdt ${default_device_tree}; - if test $board_name = j721s2; then \ - setenv name_fdt ti/k3-j721s2-common-proc-board.dtb; fi; - if test $board_name = am68-sk; then - setenv name_fdt ti/k3-am68-sk-base-board.dtb; fi; - setenv fdtfile ${name_fdt} name_kern=Image console=ttyS2,115200n8 args_all=setenv optargs earlycon=ns16550a,mmio32,0x02880000
Signature · 1 line
2.43.0
PATCH v3 9/11 board: beagle: beagleboneai64: Set fdtfile from C code instead of findfdt script
In reply to Nishanth MenonStop using the findfdt script and switch to setting the fdtfile from C code.
---
Changes in V3:
- none other than picking up reviews.
V2: https://lore.kernel.org/r/[email protected]
board/beagle/beagleboneai64/beagleboneai64.c | 14 ++++++++++++++ board/beagle/beagleboneai64/beagleboneai64.env | 1 - configs/j721e_beagleboneai64_a72_defconfig | 3 ++- 3 files changed, 16 insertions(+), 2 deletions(-)
board/beagle/beagleboneai64/beagleboneai64.c +14 -0
@@ -28,3 +28,17 @@ int dram_init_banksize(void) {return fdtdec_setup_memory_banksize (); } + +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init (void ) +{ +char fdtfile[50 ]; + +snprintf (fdtfile,sizeof (fdtfile),"%s/%s.dtb" , +CONFIG_TI_FDT_FOLDER_PATH ,CONFIG_DEFAULT_DEVICE_TREE ); + +env_set ("fdtfile" , fdtfile); + +return 0 ; +} +#endif
board/beagle/beagleboneai64/beagleboneai64.env +0 -1
@@ -1,5 +1,4 @@ #include <env/ti/ti_common.env> -#include <env/ti/default_findfdt.env> #include <env/ti/mmc.env> name_kern=Image
configs/j721e_beagleboneai64_a72_defconfig +2 -1
@@ -34,7 +34,8 @@ CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" CONFIG_AUTOBOOT_STOP_STR=" " CONFIG_OF_SYSTEM_SETUP=y -CONFIG_BOOTCOMMAND="run set_led_state_start_load;run findfdt; run envboot; bootflow scan -lb;run set_led_state_fail_load" +CONFIG_BOOTCOMMAND="run set_led_state_start_load; run envboot; bootflow scan -lb;run set_led_state_fail_load" +CONFIG_BOARD_LATE_INIT=y CONFIG_LOGLEVEL=7 CONFIG_SPL_MAX_SIZE=0xc0000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
Signature · 1 line
2.43.0
PATCH v3 10/11 board: beagle: beagleplay: Set fdtfile from C code instead of findfdt script
In reply to Nishanth MenonStop using the findfdt script and switch to setting the fdtfile from C code.
---
Changes in V3:
- none other than picking up reviews.
V2: https://lore.kernel.org/r/[email protected]
board/beagle/beagleplay/beagleplay.c | 14 ++++++++++++++ board/beagle/beagleplay/beagleplay.env | 1 - configs/am62x_beagleplay_a53_defconfig | 3 ++- 3 files changed, 16 insertions(+), 2 deletions(-)
board/beagle/beagleplay/beagleplay.c +14 -0
@@ -27,3 +27,17 @@ int dram_init_banksize(void) {return fdtdec_setup_memory_banksize (); } + +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init (void ) +{ +char fdtfile[50 ]; + +snprintf (fdtfile,sizeof (fdtfile),"%s/%s.dtb" , +CONFIG_TI_FDT_FOLDER_PATH ,CONFIG_DEFAULT_DEVICE_TREE ); + +env_set ("fdtfile" , fdtfile); + +return 0 ; +} +#endif
board/beagle/beagleplay/beagleplay.env +0 -1
@@ -1,5 +1,4 @@ #include <env/ti/ti_common.env> -#include <env/ti/default_findfdt.env> #include <env/ti/mmc.env> name_kern=Image
configs/am62x_beagleplay_a53_defconfig +2 -1
@@ -33,7 +33,8 @@ CONFIG_AUTOBOOT_KEYED=y CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" CONFIG_AUTOBOOT_DELAY_STR="d" CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_BOOTCOMMAND="run set_led_state_start_load;run findfdt; run envboot; bootflow scan -lb;run set_led_state_fail_load" +CONFIG_BOOTCOMMAND="run set_led_state_start_load; run envboot; bootflow scan -lb;run set_led_state_fail_load" +CONFIG_BOARD_LATE_INIT=y CONFIG_SPL_MAX_SIZE=0x58000 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y CONFIG_SPL_BSS_START_ADDR=0x80c80000
Signature · 1 line
2.43.0
PATCH v3 11/11 include: env: ti: Drop default_findfdt
In reply to Nishanth MenonWe shouldn't need finfdt anymore. Drop the env script.
---
Changes in V3:
- none other than picking up reviews.
V2: https://lore.kernel.org/r/[email protected]
include/env/ti/default_findfdt.env | 12 ------------ 1 file changed, 12 deletions(-) delete mode 100644 include/env/ti/default_findfdt.env
include/env/ti/default_findfdt.env deleted +0 -12
@@ -1,12 +0,0 @@ -default_device_tree=CONFIG_DEFAULT_DEVICE_TREE -default_device_tree_arch=ti -#ifdef CONFIG_ARM64 -findfdt= - setenv name_fdt ${default_device_tree_arch}/${default_device_tree}.dtb; - setenv fdtfile ${name_fdt} -#else -default_device_tree_subarch=omap -findfdt= - setenv name_fdt ${default_device_tree_arch}/${default_device_tree_subarch}/${default_device_tree}.dtb; - setenv fdtfile ${name_fdt} -#endif
Signature · 1 line
2.43.0