Bluetooth: btintel: Print Firmware Sequencer information
PATCH 1/1 Bluetooth: btintel: Print Firmware Sequencer information
Firmware sequencer(FSEQ) is a common code shared across Bluetooth and Wifi. Printing FSEQ will help to debug if there is any mismatch between Bluetooth and Wifi FSEQ.
--- drivers/bluetooth/btintel.c | 106 ++++++++++++++++++++++++++++++++++++ 1 file changed, 106 insertions(+)
drivers/bluetooth/btintel.c +106 -0
@@ -2670,6 +2670,111 @@ static void btintel_set_msft_opcode(struct hci_dev *hdev, u8 hw_variant) } } +static void btintel_print_fseq_info (struct hci_dev *hdev) +{ +struct sk_buff *skb; +u8 *p; +const char *str; + + skb =__hci_cmd_sync (hdev,0xfcb3 ,0 ,NULL ,HCI_CMD_TIMEOUT ); +if (IS_ERR (skb)) { +bt_dev_dbg (hdev,"Reading fseq status command failed (%ld)" , +PTR_ERR (skb)); +return ; + } + +if (skb->len < (sizeof (u32) *16 +2 )) { +bt_dev_dbg (hdev,"Malformed packet" ); +kfree_skb (skb); +return ; + } + +if (skb->data[0 ]) { +bt_dev_dbg (hdev,"Failed to get fseq status (0x%2.2x)" , + skb->data[0 ]); +kfree_skb (skb); +return ; + } + + p = skb->data; +/* skip status */ + p = p +1 ; + +switch (*p) { +case 0 : + str ="Success" ; +break ; +case 1 : + str ="Fatal error" ; +break ; +case 2 : + str ="Sem acq error" ; +break ; +default : + str ="Unknown error" ; +break ; + } + +bt_dev_info (hdev,"Fseq status: %s (0x%2.2x)" , str, *p); +if (*p) +return ; + p = p +1 ; +bt_dev_dbg (hdev,"Reason: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Global version: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Installed version: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_info (hdev,"Fseq executed: %2.2u.%2.2u.%2.2u.%2.2u" , p[0 ], p[1 ], + p[2 ], p[3 ]); + + p = p +4 ; +bt_dev_info (hdev,"Fseq BT Top: %2.2u.%2.2u.%2.2u.%2.2u" , p[0 ], p[1 ], + p[2 ], p[3 ]); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq Top init version: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq Cnvio init version: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq MBX Wifi file version: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq BT version: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq Top reset address: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq MBX timeout: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq MBX ack: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq CNVi id: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq CNVr id: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq Error handle: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq Magic noalive indication: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq OTP version: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq MBX otp version: 0x%8.8x" ,get_unaligned_le32 (p)); +} +static int btintel_setup_combined (struct hci_dev *hdev) {const u8 param[1 ] = {0xFF };
@@ -2902,6 +3007,7 @@ static int btintel_setup_combined(struct hci_dev *hdev) err =btintel_bootloader_setup_tlv (hdev, &ver_tlv);btintel_register_devcoredump_support (hdev); +btintel_print_fseq_info (hdev);break ;default : bt_dev_err(hdev, "Unsupported Intel hw variant (%u)",
Signature · 1 line
2.34.1
Dear Kiran,
Thank you for your patch.
Am 13.02.24 um 17:01 schrieb Kiran K:
Quoted 1 line
Firmware sequencer(FSEQ) is a common code shared across Bluetooth
Please add a space before (.
Quoted 2 lines
and Wifi. Printing FSEQ will help to debug if there is any mismatch between Bluetooth and Wifi FSEQ.
Please give an example output, and document the system, you tested this on.
Quoted 18 lines
Signed-off-by Kiran K <[email protected]>--- drivers/bluetooth/btintel.c | 106 ++++++++++++++++++++++++++++++++++++ 1 file changed, 106 insertions(+)drivers/bluetooth/btintel.c +5
-0@@ -2670,6 +2670,111 @@ static void btintel_set_msft_opcode(struct hci_dev *hdev, u8 hw_variant) } } +static void btintel_print_fseq_info (struct hci_dev *hdev) +{ +struct sk_buff *skb; +u8 *p; +const char *str;
drivers/bluetooth/btintel.c static void btintel_set_msft_opcode(struct hci_dev *hdev, u8 hw_variant) · line 2687
Quoted 10 lines
drivers/bluetooth/btintel.c +10
-0+ + skb =__hci_cmd_sync (hdev,0xfcb3 ,0 ,NULL ,HCI_CMD_TIMEOUT ); +if (IS_ERR (skb)) { +bt_dev_dbg (hdev,"Reading fseq status command failed (%ld)" , +PTR_ERR (skb)); +return ; + } + +if (skb->len < (sizeof (u32) *16 +2 )) { +bt_dev_dbg (hdev,"Malformed packet" );
Please print out the length values.
Quoted 14 lines
drivers/bluetooth/btintel.c +14
-0+kfree_skb (skb); +return ; + } + +if (skb->data[0 ]) { +bt_dev_dbg (hdev,"Failed to get fseq status (0x%2.2x)" , + skb->data[0 ]); +kfree_skb (skb); +return ; + } + + p = skb->data; +/* skip status */ + p = p +1 ;
drivers/bluetooth/btintel.c static void btintel_set_msft_opcode(struct hci_dev *hdev, u8 hw_variant) · line 2711
Quoted 10 lines
drivers/bluetooth/btintel.c +10
-0+ +switch (*p) { +case 0 : + str ="Success" ; +break ; +case 1 : + str ="Fatal error" ; +break ; +case 2 : + str ="Sem acq error" ;
Maybe elaborate here?
drivers/bluetooth/btintel.c static void btintel_set_msft_opcode(struct hci_dev *hdev, u8 hw_variant) · line 2720
Quoted 9 lines
drivers/bluetooth/btintel.c +9
-0+break ; +default : + str ="Unknown error" ; +break ; + } + +bt_dev_info (hdev,"Fseq status: %s (0x%2.2x)" , str, *p); +if (*p) +return ;
Should non-success levels have a different log level?
Quoted 61 lines
drivers/bluetooth/btintel.c +57
-0+ p = p +1 ; +bt_dev_dbg (hdev,"Reason: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Global version: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Installed version: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_info (hdev,"Fseq executed: %2.2u.%2.2u.%2.2u.%2.2u" , p[0 ], p[1 ], + p[2 ], p[3 ]); + + p = p +4 ; +bt_dev_info (hdev,"Fseq BT Top: %2.2u.%2.2u.%2.2u.%2.2u" , p[0 ], p[1 ], + p[2 ], p[3 ]); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq Top init version: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq Cnvio init version: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq MBX Wifi file version: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq BT version: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq Top reset address: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq MBX timeout: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq MBX ack: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq CNVi id: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq CNVr id: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq Error handle: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq Magic noalive indication: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq OTP version: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq MBX otp version: 0x%8.8x" ,get_unaligned_le32 (p)); +} +static int btintel_setup_combined (struct hci_dev *hdev) {const u8 param[1 ] = {0xFF };
drivers/bluetooth/btintel.c static int btintel_setup_combined(struct hci_dev *hdev) · line 3013
Quoted 7 lines
drivers/bluetooth/btintel.c +1
-0@@ -2902,6 +3007,7 @@ static int btintel_setup_combined(struct hci_dev *hdev) err =btintel_bootloader_setup_tlv (hdev, &ver_tlv);btintel_register_devcoredump_support (hdev); +btintel_print_fseq_info (hdev);break ;default : bt_dev_err(hdev, "Unsupported Intel hw variant (%u)",
Kind regards,
Paul
Hi Paul,
Thanks for your comments.
Quoted 13 lines
-----Original Message-----
From: Paul Menzel <[email protected]>
Sent: Tuesday, February 13, 2024 9:35 PM
To: K, Kiran <[email protected]>
Cc: Srivatsa, Ravishankar <[email protected]>; Tumkur Narayan, Chethan <[email protected]>; linux- [email protected]
Subject: Re: [PATCH v1] Bluetooth: btintel: Print Firmware Sequencer informationDear Kiran,
Quoted 6 lines
Thank you for your patch.
Am 13.02.24 um 17:01 schrieb Kiran K:
Quoted 1 line
Firmware sequencer(FSEQ) is a common code shared across Bluetooth
Please add a space before (.
Ack
Quoted 4 lines
Quoted 2 lines
and Wifi. Printing FSEQ will help to debug if there is any mismatch between Bluetooth and Wifi FSEQ.
Please give an example output, and document the system, you tested this on.
This patch was tested with Typhoon Peak2 controller.
Quoted 25 lines
Quoted 4 lines
Signed-off-by Kiran K <[email protected]>--- drivers/bluetooth/btintel.c | 106++++++++++++++++++++++++++++++++++++
drivers/bluetooth/btintel.c static void btintel_set_msft_opcode(struct
Quoted 7 lines
1 file changed, 106 insertions(+)drivers/bluetooth/btintel.c +0
-0@@ -2670,6 +2670,111 @@ static void btintel_set_msft_opcode(struct
hci_dev*hdev, u8hw_variant)drivers/bluetooth/btintel.c static void btintel_set_msft_opcode(struct hci_dev *hdev, u8 hw_variant)
Quoted 11 lines
drivers/bluetooth/btintel.c +8
-0} } +static void btintel_print_fseq_info (struct hci_dev *hdev) { +struct sk_buff *skb; +u8 *p; +const char *str; + + skb =__hci_cmd_sync (hdev,0xfcb3 ,0 ,NULL ,HCI_CMD_TIMEOUT ); +if (IS_ERR (skb)) { + bt_dev_dbg(hdev, "Reading fseq status command failed(%ld)",
Quoted 8 lines
drivers/bluetooth/btintel.c static void btintel_set_msft_opcode(struct hci_dev *hdev, u8 hw_variant) · line 2687
Quoted 6 lines
drivers/bluetooth/btintel.c +6
-0+ PTR_ERR(skb)); +return ; + } + +if (skb->len < (sizeof (u32) *16 +2 )) { +bt_dev_dbg (hdev,"Malformed packet" );Please print out the length values.
Sure.
Quoted 19 lines
Quoted 19 lines
drivers/bluetooth/btintel.c +18
-0+kfree_skb (skb); +return ; + } + +if (skb->data[0 ]) { +bt_dev_dbg (hdev,"Failed to get fseq status (0x%2.2x)" , + skb->data[0 ]); +kfree_skb (skb); +return ; + } + + p = skb->data; +/* skip status */ + p = p +1 ; + +switch (*p) { +case 0 : + str ="Success" ;
Quoted 8 lines
drivers/bluetooth/btintel.c static void btintel_set_msft_opcode(struct hci_dev *hdev, u8 hw_variant) · line 2711
Quoted 6 lines
drivers/bluetooth/btintel.c +6
-0+break ; +case 1 : + str ="Fatal error" ; +break ; +case 2 : + str ="Sem acq error" ;Maybe elaborate here?
FSEQ code execution is mutually exclusive between Wifi and Bluetooth. If Bluetooth not able to acquire semaphore, then error code 2 will be reported.
Quoted 12 lines
drivers/bluetooth/btintel.c static void btintel_set_msft_opcode(struct hci_dev *hdev, u8 hw_variant) · line 2720
Quoted 10 lines
drivers/bluetooth/btintel.c +9
-0+break ; +default : + str ="Unknown error" ; +break ; + } + +bt_dev_info (hdev,"Fseq status: %s (0x%2.2x)" , str, *p); +if (*p) +return ;Should non-success levels have a different log level?
I will add bt_dev_err for non-success case.
Quoted 3 lines
drivers/bluetooth/btintel.c static void btintel_set_msft_opcode(struct · line 2721
Quoted 3 lines
drivers/bluetooth/btintel.c +2
-0+ p = p +1 ; +bt_dev_dbg (hdev,"Reason: 0x%8.8x" ,get_unaligned_le32 (p));
Thanks,
Kiran
Luiz Augusto von Dentz
maintainerHi Kiran,
Quoted 37 lines · Kiran K
Firmware sequencer(FSEQ) is a common code shared across Bluetooth and Wifi. Printing FSEQ will help to debug if there is any mismatch between Bluetooth and Wifi FSEQ.
Signed-off-by Kiran K <[email protected]>--- drivers/bluetooth/btintel.c | 106 ++++++++++++++++++++++++++++++++++++ 1 file changed, 106 insertions(+)drivers/bluetooth/btintel.c +19
-0@@ -2670,6 +2670,111 @@ static void btintel_set_msft_opcode(struct hci_dev *hdev, u8 hw_variant) } } +static void btintel_print_fseq_info (struct hci_dev *hdev) +{ +struct sk_buff *skb; +u8 *p; +const char *str; + + skb =__hci_cmd_sync (hdev,0xfcb3 ,0 ,NULL ,HCI_CMD_TIMEOUT ); +if (IS_ERR (skb)) { +bt_dev_dbg (hdev,"Reading fseq status command failed (%ld)" , +PTR_ERR (skb)); +return ; + } + +if (skb->len < (sizeof (u32) *16 +2 )) { +bt_dev_dbg (hdev,"Malformed packet" ); +kfree_skb (skb); +return ; + } +
drivers/bluetooth/btintel.c static void btintel_set_msft_opcode(struct hci_dev *hdev, u8 hw_variant) · line 2701
Quoted 10 lines
drivers/bluetooth/btintel.c +10
-0+if (skb->data[0 ]) { +bt_dev_dbg (hdev,"Failed to get fseq status (0x%2.2x)" , + skb->data[0 ]); +kfree_skb (skb); +return ; + } + + p = skb->data; +/* skip status */ + p = p +1 ;
How about we use skb_pull_data instead of accessing these fields with a pointer cursor?
Quoted 90 lines
drivers/bluetooth/btintel.c +76
-1+switch (*p) { +case 0 : + str ="Success" ; +break ; +case 1 : + str ="Fatal error" ; +break ; +case 2 : + str ="Sem acq error" ; +break ; +default : + str ="Unknown error" ; +break ; + } + +bt_dev_info (hdev,"Fseq status: %s (0x%2.2x)" , str, *p); +if (*p) +return ; + p = p +1 ; +bt_dev_dbg (hdev,"Reason: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Global version: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Installed version: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_info (hdev,"Fseq executed: %2.2u.%2.2u.%2.2u.%2.2u" , p[0 ], p[1 ], + p[2 ], p[3 ]); + + p = p +4 ; +bt_dev_info (hdev,"Fseq BT Top: %2.2u.%2.2u.%2.2u.%2.2u" , p[0 ], p[1 ], + p[2 ], p[3 ]); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq Top init version: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq Cnvio init version: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq MBX Wifi file version: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq BT version: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq Top reset address: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq MBX timeout: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq MBX ack: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq CNVi id: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq CNVr id: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq Error handle: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq Magic noalive indication: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq OTP version: 0x%8.8x" ,get_unaligned_le32 (p)); + + p = p +4 ; +bt_dev_dbg (hdev,"Fseq MBX otp version: 0x%8.8x" ,get_unaligned_le32 (p)); +} +static int btintel_setup_combined (struct hci_dev *hdev) {const u8 param[1 ] = {0xFF };@@ -2902,6 +3007,7 @@ static int btintel_setup_combined(struct hci_dev *hdev) err =btintel_bootloader_setup_tlv (hdev, &ver_tlv);btintel_register_devcoredump_support (hdev); +btintel_print_fseq_info (hdev);break ;default : bt_dev_err(hdev, "Unsupported Intel hw variant (%u)", --2.34.1
Signature · 1 line
Luiz Augusto von Dentz
Hi Luiz,
Quoted 56 lines
-----Original Message-----
From: Luiz Augusto von Dentz <[email protected]>
Sent: Tuesday, February 13, 2024 9:40 PM
To: K, Kiran <[email protected]>
Cc: [email protected]; Srivatsa, Ravishankar <[email protected]>; Tumkur Narayan, Chethan <[email protected]>
Subject: Re: [PATCH v1] Bluetooth: btintel: Print Firmware Sequencer informationHi Kiran,
drivers/bluetooth/btintel.c static void btintel_set_msft_opcode(struct
Quoted 16 lines · Kiran K
Firmware sequencer(FSEQ) is a common code shared across Bluetooth and Wifi. Printing FSEQ will help to debug if there is any mismatch between Bluetooth and Wifi FSEQ.
Signed-off-by Kiran K <[email protected]>--- drivers/bluetooth/btintel.c | 106 ++++++++++++++++++++++++++++++++++++ 1 file changed, 106 insertions(+)drivers/bluetooth/btintel.c +0
-0@@ -2670,6 +2670,111 @@ static void btintel_set_msft_opcode(struct
hci_dev*hdev, u8hw_variant)Quoted 26 lines
drivers/bluetooth/btintel.c +23
-0} } +static void btintel_print_fseq_info (struct hci_dev *hdev) { +struct sk_buff *skb; +u8 *p; +const char *str; + + skb =__hci_cmd_sync (hdev,0xfcb3 ,0 ,NULL ,HCI_CMD_TIMEOUT ); +if (IS_ERR (skb)) { +bt_dev_dbg (hdev,"Reading fseq status command failed (%ld)" , +PTR_ERR (skb)); +return ; + } + +if (skb->len < (sizeof (u32) *16 +2 )) { +bt_dev_dbg (hdev,"Malformed packet" ); +kfree_skb (skb); +return ; + } + +if (skb->data[0 ]) { +bt_dev_dbg (hdev,"Failed to get fseq status (0x%2.2x)" , + skb->data[0 ]); +kfree_skb (skb); +return ;
Quoted 8 lines
drivers/bluetooth/btintel.c static void btintel_set_msft_opcode(struct hci_dev *hdev, u8 hw_variant) · line 2701
Quoted 5 lines
drivers/bluetooth/btintel.c +5
-0+ } + + p = skb->data; +/* skip status */ + p = p +1 ;How about we use
skb_pull_datainstead of accessing these fields with a pointer cursor?
I will fix it in v2 version of patch.
Quoted 2 lines
drivers/bluetooth/btintel.c static void btintel_set_msft_opcode(struct hci_dev *hdev, u8 hw_variant) · line 2703
Quoted 2 lines
drivers/bluetooth/btintel.c +1
-0+switch (*p) {
Thanks,
Kiran
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=825702
---Test result---
Test Summary:
CheckPatch PASS 0.67 seconds GitLint PASS 0.29 seconds SubjectPrefix PASS 0.11 seconds BuildKernel PASS 27.91 seconds CheckAllWarning PASS 30.37 seconds CheckSparse PASS 35.88 seconds CheckSmatch PASS 98.23 seconds BuildKernel32 PASS 26.85 seconds TestRunnerSetup PASS 497.72 seconds TestRunner_l2cap-tester FAIL 12.19 seconds TestRunner_iso-tester PASS 28.46 seconds TestRunner_bnep-tester PASS 4.84 seconds TestRunner_mgmt-tester FAIL 171.45 seconds TestRunner_rfcomm-tester PASS 7.39 seconds TestRunner_sco-tester PASS 14.97 seconds TestRunner_ioctl-tester PASS 7.80 seconds TestRunner_mesh-tester PASS 5.92 seconds TestRunner_smp-tester PASS 6.84 seconds TestRunner_userchan-tester PASS 4.96 seconds IncrementalBuild PASS 25.81 seconds
Details
##############################
Test: TestRunner_l2cap-tester - FAIL
Desc: Run l2cap-tester with test-runner Output:
No test result found
##############################
Test: TestRunner_mgmt-tester - FAIL
Desc: Run mgmt-tester with test-runner Output:
Total: 492, Passed: 486 (98.8%), Failed: 5, Not Run: 1
Failed Test Cases
LL Privacy - Add Device 4 (2 Devices to AL) Failed 0.115 seconds LL Privacy - Add Device 5 (2 Devices to RL) Failed 0.119 seconds LL Privacy - Add Device 6 (RL is full) Failed 0.144 seconds LL Privacy - Remove Device 2 (Remove from RL) Timed out 2.510 seconds LL Privacy - Remove Device 4 (Disable Adv) Timed out 1.843 seconds
---
Regards,
Linux Bluetooth