Add support for batched min timeout
Jens Axboe
maintainerv2 cover Add support for batched min timeout
Hi,
Normal CQE waiting is generally either done with a timeout, or without one. Outside of the timeout, the other key parameter is how many events to wait for. If we ask for N events and we get that within the timeout, then we return successfully. If we do not, then we return with -ETIME and the application can then check how many CQEs are actually available, if any.
This works fine, but we're increasingly using smaller timeouts in applications for targeted batch waiting. Eg "give me N requests in T usec". If the application has other things do do every T usec, this works fine. But if it's an event loop that wants to process completions to make progress, it's pointless to return after T usec if there's nothing to do. The application can't really make T bigger reliably, as this may be the target it has to meet at busier times of the day.
This patchset adds support for min timeout waiting, which adds a third parameter to how waits are done. The N and T timeout remain, but we add a min_timeout option, M. The batch is now defined by N and M. The application can now say "give me N requests in M usec, but if none have arrived, just sleep until T has passed". This allows for using a sane N+M, while avoid waking and returning all the time if nothing happens.
The semantics are as follows:
- If M expires and no events are available, keep waiting until T has expired. This is identical to using N+T without setting M at all, except if an event arrives after M has expired, we return immediately.
- If M expires and events are available, return those even if it's less than N.
- If N events arrive before M expires, return those events. This is identical to T == M, and M not being set.
There's a liburing branch with test cases here:
https://git.kernel.dk/cgit/liburing/log/?h=min-wait
and the patches are on top of the current for-6.9/io_uring branch. They can also be viewed here:
https://git.kernel.dk/cgit/linux/log/?h=io_uring-min-wait
include/uapi/linux/io_uring.h | 3 +- io_uring/io_uring.c | 156 ++++++++++++++++++++++++++++------ io_uring/io_uring.h | 4 + 3 files changed, 134 insertions(+), 29 deletions(-)
Changes since v1:
- Fix issue with both min_wait and timeout, and transitioning to the long timeout. We'd add the current time potentially more than once, causing much longer waits than what was asked for. Test case has been added for that as well.
Signature · 1 line
Jens Axboe
Jens Axboe
maintainerPATCH v2 1/4 io_uring: move schedule wait logic into helper
In preparation for expanding how we handle waits, move the actual schedule and schedule_timeout() handling into a helper.
--- io_uring/io_uring.c | 37 +++++++++++++++++++++---------------- 1 file changed, 21 insertions(+), 16 deletions(-)
io_uring/io_uring.c +21 -16
@@ -2516,22 +2516,10 @@ static bool current_pending_io(void)return percpu_counter_read_positive (&tctx->inflight); } -/* when returns >0, the caller should retry */ -static inline int io_cqring_wait_schedule (struct io_ring_ctx *ctx, -struct io_wait_queue *iowq) +static int __io_cqring_wait_schedule (struct io_ring_ctx *ctx, +struct io_wait_queue *iowq) { -int io_wait, ret; - -if (unlikely (READ_ONCE (ctx->check_cq))) -return 1 ; -if (unlikely (!llist_empty (&ctx->work_llist))) -return 1 ; -if (unlikely (test_thread_flag (TIF_NOTIFY_SIGNAL ))) -return 1 ; -if (unlikely (task_sigpending (current))) -return -EINTR ; -if (unlikely (io_should_wake (iowq))) -return 0 ; +int io_wait, ret =0 ;/* * Mark us as being in io_wait if we have pending requests, so cpufreq
@@ -2541,7 +2529,6 @@ static inline int io_cqring_wait_schedule(struct io_ring_ctx *ctx, io_wait = current->in_iowait;if (current_pending_io ()) current->in_iowait =1 ; - ret =0 ;if (iowq->timeout ==KTIME_MAX )schedule ();else if (!schedule_hrtimeout (&iowq->timeout,HRTIMER_MODE_ABS ))
@@ -2550,6 +2537,24 @@ static inline int io_cqring_wait_schedule(struct io_ring_ctx *ctx,return ret; } +/* when returns >0, the caller should retry */ +static inline int io_cqring_wait_schedule (struct io_ring_ctx *ctx, +struct io_wait_queue *iowq) +{ +if (unlikely (READ_ONCE (ctx->check_cq))) +return 1 ; +if (unlikely (!llist_empty (&ctx->work_llist))) +return 1 ; +if (unlikely (test_thread_flag (TIF_NOTIFY_SIGNAL ))) +return 1 ; +if (unlikely (task_sigpending (current))) +return -EINTR ; +if (unlikely (io_should_wake (iowq))) +return 0 ; + +return __io_cqring_wait_schedule (ctx, iowq); +} +/* * Wait until events become available, if we don't already have some. The * application must reap them itself, as they reside on the shared cq ring.
Signature · 1 line
2.43.0
Jens Axboe
maintainerPATCH v2 2/4 io_uring: implement our own schedule timeout handling
In reply to Jens AxboeIn preparation for having two distinct timeouts and avoid waking the task if we don't need to.
--- io_uring/io_uring.c | 39 +++++++++++++++++++++++++++++++++++---- io_uring/io_uring.h | 2 ++ 2 files changed, 37 insertions(+), 4 deletions(-)
io_uring/io_uring.c +35 -4
@@ -2488,7 +2488,7 @@ static int io_wake_function(struct wait_queue_entry *curr, unsigned int mode,* Cannot safely flush overflowed CQEs from here, ensure we wake up * the task, and the next invocation will do it. */ -if (io_should_wake (iowq) ||io_has_work (iowq->ctx)) +if (io_should_wake (iowq) ||io_has_work (iowq->ctx) || iowq->hit_timeout)return autoremove_wake_function (curr, mode, wake_flags, key);return -1 ; }
@@ -2516,6 +2516,37 @@ static bool current_pending_io(void)return percpu_counter_read_positive (&tctx->inflight); } +static enum hrtimer_restart io_cqring_timer_wakeup (struct hrtimer *timer) +{ + struct io_wait_queue *iowq = container_of(timer, struct io_wait_queue, t); +struct io_ring_ctx *ctx = iowq->ctx; + +WRITE_ONCE (iowq->hit_timeout,1 ); +if (ctx->flags &IORING_SETUP_DEFER_TASKRUN ) +wake_up_process (ctx->submitter_task); +else +io_cqring_wake (ctx); +return HRTIMER_NORESTART ; +} + +static int io_cqring_schedule_timeout (struct io_wait_queue *iowq) +{ + iowq->hit_timeout =0 ; +hrtimer_init_on_stack (&iowq->t,CLOCK_MONOTONIC ,HRTIMER_MODE_ABS ); + iowq->t.function = io_cqring_timer_wakeup; +hrtimer_set_expires_range_ns (&iowq->t, iowq->timeout,0 ); +hrtimer_start_expires (&iowq->t,HRTIMER_MODE_ABS ); + +if (!READ_ONCE (iowq->hit_timeout)) +schedule (); + +hrtimer_cancel (&iowq->t); +destroy_hrtimer_on_stack (&iowq->t); +__set_current_state (TASK_RUNNING ); + +return READ_ONCE (iowq->hit_timeout) ? -ETIME :0 ; +} +static int __io_cqring_wait_schedule (struct io_ring_ctx *ctx,struct io_wait_queue *iowq) {
@@ -2529,10 +2560,10 @@ static int __io_cqring_wait_schedule(struct io_ring_ctx *ctx, io_wait = current->in_iowait;if (current_pending_io ()) current->in_iowait =1 ; -if (iowq->timeout ==KTIME_MAX ) +if (iowq->timeout !=KTIME_MAX ) + ret =io_cqring_schedule_timeout (iowq); +else schedule (); -else if (!schedule_hrtimeout (&iowq->timeout,HRTIMER_MODE_ABS )) - ret = -ETIME ; current->in_iowait = io_wait;return ret; }
io_uring/io_uring.h +2 -0
@@ -40,7 +40,9 @@ struct io_wait_queue {struct io_ring_ctx *ctx;unsigned cq_tail;unsigned nr_timeouts; +int hit_timeout;ktime_t timeout; +struct hrtimer t;#ifdef CONFIG_NET_RX_BUSY_POLL unsigned int napi_busy_poll_to;
Signature · 1 line
2.43.0
Jens Axboe
maintainerPATCH v2 3/4 io_uring: add support for batch wait timeout
In reply to Jens AxboeWaiting for events with io_uring has two knobs that can be set:
1) The number of events to wake for
2) The timeout associated with the event
Waiting will abort when either of those conditions are met, as expected.
This adds support for a third event, which is associated with the number of events to wait for. Applications generally like to handle batches of completions, and right now they'd set a number of events to wait for and the timeout for that. If no events have been received but the timeout triggers, control is returned to the application and it can wait again. However, if the application doesn't have anything to do until events are reaped, then it's possible to make this waiting more efficient.
For example, the application may have a latency time of 50 usecs and wanting to handle a batch of 8 requests at the time. If it uses 50 usecs as the timeout, then it'll be doing 20K context switches per second even if nothing is happening.
This introduces the notion of min batch wait time. If the min batch wait time expires, then we'll return to userspace if we have any events at all. If none are available, the general wait time is applied. Any request arriving after the min batch wait time will cause waiting to stop and return control to the application.
--- io_uring/io_uring.c | 79 +++++++++++++++++++++++++++++++++++++++------ io_uring/io_uring.h | 2 ++ 2 files changed, 71 insertions(+), 10 deletions(-)
io_uring/io_uring.c +69 -10
@@ -2529,12 +2529,65 @@ static enum hrtimer_restart io_cqring_timer_wakeup(struct hrtimer *timer)return HRTIMER_NORESTART ; } -static int io_cqring_schedule_timeout (struct io_wait_queue *iowq) +/* +* Doing min_timeout portion. If we saw any timeouts, events, or have work, +* wake up. If not, and we have a normal timeout, switch to that and keep +* sleeping. +*/ +static enum hrtimer_restart io_cqring_min_timer_wakeup (struct hrtimer *timer) { + struct io_wait_queue *iowq = container_of(timer, struct io_wait_queue, t); +struct io_ring_ctx *ctx = iowq->ctx; +ktime_t timeout; + +/* no general timeout, or shorter, we are done */ +if (iowq->timeout ==KTIME_MAX || +ktime_after (iowq->min_timeout, iowq->timeout)) + goto out_wake; +/* work we may need to run, wake function will see if we need to wake */ +if (io_has_work (ctx)) + goto out_wake; +/* got events since we started waiting, min timeout is done */ +if (iowq->cq_min_tail !=READ_ONCE (ctx->rings->cq.tail)) + goto out_wake; +/* if we have any events and min timeout expired, we're done */ +if (io_cqring_events (ctx)) + goto out_wake; + +/* +* If using deferred task_work running and application is waiting on +* more than one request, ensure we reset it now where we are switching +* to normal sleeps. Any request completion post min_wait should wake +* the task and return. +*/ +if (ctx->flags &IORING_SETUP_DEFER_TASKRUN ) +atomic_set (&ctx->cq_wait_nr,1 ); + + timeout =ktime_sub_ns (iowq->timeout, iowq->min_timeout); + iowq->t.function = io_cqring_timer_wakeup; +hrtimer_set_expires (timer,ktime_add_ns (timeout,ktime_get_ns ())); +return HRTIMER_RESTART ; +out_wake: +return io_cqring_timer_wakeup (timer); +} + +static int io_cqring_schedule_timeout (struct io_wait_queue *iowq, +ktime_t start_time) +{ +ktime_t timeout; + iowq->hit_timeout =0 ;hrtimer_init_on_stack (&iowq->t,CLOCK_MONOTONIC ,HRTIMER_MODE_ABS ); - iowq->t.function = io_cqring_timer_wakeup; -hrtimer_set_expires_range_ns (&iowq->t, iowq->timeout,0 ); + +if (iowq->min_timeout !=KTIME_MAX ) { + timeout =ktime_add_ns (iowq->min_timeout, start_time); + iowq->t.function = io_cqring_min_timer_wakeup; + }else { + timeout =ktime_add_ns (iowq->timeout, start_time); + iowq->t.function = io_cqring_timer_wakeup; + } + +hrtimer_set_expires_range_ns (&iowq->t, timeout,0 );hrtimer_start_expires (&iowq->t,HRTIMER_MODE_ABS );if (!READ_ONCE (iowq->hit_timeout))
@@ -2548,7 +2601,8 @@ static int io_cqring_schedule_timeout(struct io_wait_queue *iowq) }static int __io_cqring_wait_schedule (struct io_ring_ctx *ctx, -struct io_wait_queue *iowq) +struct io_wait_queue *iowq, +ktime_t start_time) {int io_wait, ret =0 ;
@@ -2560,8 +2614,8 @@ static int __io_cqring_wait_schedule(struct io_ring_ctx *ctx, io_wait = current->in_iowait;if (current_pending_io ()) current->in_iowait =1 ; -if (iowq->timeout !=KTIME_MAX ) - ret =io_cqring_schedule_timeout (iowq); +if (iowq->timeout !=KTIME_MAX || iowq->min_timeout !=KTIME_MAX ) + ret =io_cqring_schedule_timeout (iowq, start_time);else schedule (); current->in_iowait = io_wait;
@@ -2570,7 +2624,8 @@ static int __io_cqring_wait_schedule(struct io_ring_ctx *ctx,/* when returns >0, the caller should retry */ static inline int io_cqring_wait_schedule (struct io_ring_ctx *ctx, -struct io_wait_queue *iowq) +struct io_wait_queue *iowq, +ktime_t start_time) {if (unlikely (READ_ONCE (ctx->check_cq)))return 1 ;
@@ -2583,7 +2638,7 @@ static inline int io_cqring_wait_schedule(struct io_ring_ctx *ctx,if (unlikely (io_should_wake (iowq)))return 0 ; -return __io_cqring_wait_schedule (ctx, iowq); +return __io_cqring_wait_schedule (ctx, iowq, start_time); }/*
@@ -2596,6 +2651,7 @@ static int io_cqring_wait(struct io_ring_ctx *ctx, int min_events, {struct io_wait_queue iowq;struct io_rings *rings = ctx->rings; +ktime_t start_time;int ret;if (!io_allowed_run_tw (ctx))
@@ -2626,8 +2682,11 @@ static int io_cqring_wait(struct io_ring_ctx *ctx, int min_events,INIT_LIST_HEAD (&iowq.wq.entry); iowq.ctx = ctx; iowq.nr_timeouts =atomic_read (&ctx->cq_timeouts); + iowq.cq_min_tail =READ_ONCE (ctx->rings->cq.tail); iowq.cq_tail =READ_ONCE (ctx->rings->cq.head) + min_events; + iowq.min_timeout =KTIME_MAX ; iowq.timeout =KTIME_MAX ; + start_time =ktime_get_ns ();if (uts) {struct timespec64 ts;
@@ -2635,7 +2694,7 @@ static int io_cqring_wait(struct io_ring_ctx *ctx, int min_events,if (get_timespec64 (&ts, uts))return -EFAULT ; - iowq.timeout =ktime_add_ns (timespec64_to_ktime (ts),ktime_get_ns ()); + iowq.timeout =timespec64_to_ktime (ts);io_napi_adjust_timeout (ctx, &iowq, &ts); }
@@ -2654,7 +2713,7 @@ static int io_cqring_wait(struct io_ring_ctx *ctx, int min_events, TASK_INTERRUPTIBLE); } - ret =io_cqring_wait_schedule (ctx, &iowq); + ret =io_cqring_wait_schedule (ctx, &iowq, start_time);__set_current_state (TASK_RUNNING );atomic_set (&ctx->cq_wait_nr,IO_CQ_WAKE_INIT );
io_uring/io_uring.h +2 -0
@@ -39,8 +39,10 @@ struct io_wait_queue {struct wait_queue_entry wq;struct io_ring_ctx *ctx;unsigned cq_tail; +unsigned cq_min_tail;unsigned nr_timeouts;int hit_timeout; +ktime_t min_timeout;ktime_t timeout;struct hrtimer t;
Signature · 1 line
2.43.0
Jens Axboe
maintainerPATCH v2 4/4 io_uring: wire up min batch wake timeout
In reply to Jens AxboeExpose min_wait_usec in io_uring_getevents_arg, replacing the pad member that is currently in there. The value is in usecs, which is explained in the name as well.
Note that if min_wait_usec and a normal timeout is used in conjunction, the normal timeout is still relative to the base time. For example, if min_wait_usec is set to 100 and the normal timeout is 1000, the max total time waited is still 1000. This also means that if the normal timeout is shorter than min_wait_usec, then only the min_wait_usec will take effect.
See previous commit for an explanation of how this works.
IORING_FEAT_MIN_TIMEOUT is added as a feature flag for this, as applications doing submit_and_wait_timeout() style operations will generally not see the -EINVAL from the wait side as they return the number of IOs submitted. Only if no IOs are submitted will the -EINVAL bubble back up to the application.
--- include/uapi/linux/io_uring.h | 3 ++- io_uring/io_uring.c | 21 +++++++++++++-------- 2 files changed, 15 insertions(+), 9 deletions(-)
include/uapi/linux/io_uring.h +2 -1
@@ -522,6 +522,7 @@ struct io_uring_params {#define IORING_FEAT_CQE_SKIP (1U << 11)#define IORING_FEAT_LINKED_FILE (1U << 12)#define IORING_FEAT_REG_REG_RING (1U << 13) +#define IORING_FEAT_MIN_TIMEOUT (1U << 14)/* * io_uring_register(2) opcodes and arguments
@@ -738,7 +739,7 @@ enum {struct io_uring_getevents_arg {__u64 sigmask;__u32 sigmask_sz; -__u32 pad; +__u32 min_wait_usec;__u64 ts; };
io_uring/io_uring.c +13 -8
@@ -2647,7 +2647,8 @@ static inline int io_cqring_wait_schedule(struct io_ring_ctx *ctx,*/ static int io_cqring_wait (struct io_ring_ctx *ctx,int min_events,const sigset_t __user *sig,size_t sigsz, -struct __kernel_timespec __user *uts) +struct __kernel_timespec __user *uts, +ktime_t min_time) {struct io_wait_queue iowq;struct io_rings *rings = ctx->rings;
@@ -2684,7 +2685,7 @@ static int io_cqring_wait(struct io_ring_ctx *ctx, int min_events, iowq.nr_timeouts =atomic_read (&ctx->cq_timeouts); iowq.cq_min_tail =READ_ONCE (ctx->rings->cq.tail); iowq.cq_tail =READ_ONCE (ctx->rings->cq.head) + min_events; - iowq.min_timeout =KTIME_MAX ; + iowq.min_timeout = min_time; iowq.timeout =KTIME_MAX ; start_time =ktime_get_ns ();
@@ -3634,10 +3635,12 @@ static int io_validate_ext_arg(unsigned flags, const void __user *argp, size_t astatic int io_get_ext_arg (unsigned flags,const void __user *argp,size_t *argsz,struct __kernel_timespec __user **ts, -const sigset_t __user **sig) +const sigset_t __user **sig,ktime_t *min_time) {struct io_uring_getevents_arg arg; + *min_time =KTIME_MAX ; +/* * If EXT_ARG isn't set, then we have no timespec and the argp pointer * is just a pointer to the sigset_t.
@@ -3656,8 +3659,8 @@ static int io_get_ext_arg(unsigned flags, const void __user *argp, size_t *argszreturn -EINVAL ;if (copy_from_user (&arg, argp,sizeof (arg)))return -EFAULT ; -if (arg.pad) -return -EINVAL ; +if (arg.min_wait_usec) + *min_time = arg.min_wait_usec *NSEC_PER_USEC ; *sig =u64_to_user_ptr (arg.sigmask); *argsz = arg.sigmask_sz; *ts =u64_to_user_ptr (arg.ts);
@@ -3769,13 +3772,14 @@ SYSCALL_DEFINE6(io_uring_enter, unsigned int, fd, u32, to_submit, }else {const sigset_t __user *sig;struct __kernel_timespec __user *ts; +ktime_t min_time; - ret2 =io_get_ext_arg (flags, argp, &argsz, &ts, &sig); + ret2 =io_get_ext_arg (flags, argp, &argsz, &ts, &sig, &min_time);if (likely (!ret2)) { min_complete =min (min_complete, ctx->cq_entries); ret2 =io_cqring_wait (ctx, min_complete, sig, - argsz, ts); + argsz, ts, min_time); } }
@@ -4058,7 +4062,8 @@ static __cold int io_uring_create(unsigned entries, struct io_uring_params *p,IORING_FEAT_POLL_32BITS |IORING_FEAT_SQPOLL_NONFIXED |IORING_FEAT_EXT_ARG |IORING_FEAT_NATIVE_WORKERS |IORING_FEAT_RSRC_TAGS |IORING_FEAT_CQE_SKIP | -IORING_FEAT_LINKED_FILE |IORING_FEAT_REG_REG_RING ; +IORING_FEAT_LINKED_FILE |IORING_FEAT_REG_REG_RING | +IORING_FEAT_MIN_TIMEOUT ;if (copy_to_user (params, p,sizeof (*p))) { ret = -EFAULT ;
Signature · 1 line
2.43.0