arm64: tegra: Tegra194 device-tree updates
Subsystems (2)
Jon Hunter
maintainercover arm64: tegra: Tegra194 device-tree updates
Add the current monitors for Jetson Xavier based devices and enable USB device support for Jetson AGX Xavier.
Jon Hunter (3):
arm64: tegra: Add current monitors for Jetson Xavier
arm64: tegra: Add USB device support for Jetson AGX Xavier
arm64: tegra: Add USB Type-C controller for Jetson AGX Xavier
.../arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 50 ++++++++++++++++++ .../boot/dts/nvidia/tegra194-p2972-0000.dts | 51 ++++++++++++++++++- .../arm64/boot/dts/nvidia/tegra194-p3668.dtsi | 27 ++++++++++ 3 files changed, 127 insertions(+), 1 deletion(-)
Signature · 1 line
2.34.1
Jon Hunter
maintainerPATCH 1/3 arm64: tegra: Add current monitors for Jetson Xavier
Add the INA3221 current monitors that are present on the Jetson AGX Xavier and Jetson Xavier NX boards.
--- .../arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 50 +++++++++++++++++++ .../arm64/boot/dts/nvidia/tegra194-p3668.dtsi | 27 ++++++++++ 2 files changed, 77 insertions(+)
arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi +50 -0
@@ -53,6 +53,56 @@ memory-controller@2c00000 { status = "okay"; }; + i2c@c240000 { + status = "okay"; + + ina3221@40 { + compatible = "ti,ina3221"; + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + input@0 { + reg = <0x0>; + label = "GPU"; + shunt-resistor-micro-ohms = <5000>; + }; + input@1 { + reg = <0x1>; + label = "CPU"; + shunt-resistor-micro-ohms = <5000>; + }; + input@2 { + reg = <0x2>; + label = "SOC"; + shunt-resistor-micro-ohms = <5000>; + }; + }; + + ina3221@41 { + compatible = "ti,ina3221"; + reg = <0x41>; + #address-cells = <1>; + #size-cells = <0>; + + input@0 { + reg = <0x0>; + label = "CV"; + shunt-resistor-micro-ohms = <5000>; + }; + input@1 { + reg = <0x1>; + label = "VDDRQ"; + shunt-resistor-micro-ohms = <5000>; + }; + input@2 { + reg = <0x2>; + label = "SYS5V"; + shunt-resistor-micro-ohms = <5000>; + }; + }; + }; + serial@3110000 { status = "okay"; };
arch/arm64/boot/dts/nvidia/tegra194-p3668.dtsi +27 -0
@@ -50,6 +50,33 @@ memory-controller@2c00000 { status = "okay"; }; + i2c@c250000 { + status = "okay"; + + ina3221@40 { + compatible = "ti,ina3221"; + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + + input@0 { + reg = <0x0>; + label = "VDD_IN"; + shunt-resistor-micro-ohms = <5000>; + }; + input@1 { + reg = <0x1>; + label = "VDD_CPU_GPU_CV"; + shunt-resistor-micro-ohms = <5000>; + }; + input@2 { + reg = <0x2>; + label = "VDD_SOC"; + shunt-resistor-micro-ohms = <5000>; + }; + }; + }; + serial@3100000 { status = "okay"; };
Signature · 1 line
2.34.1
Re: [PATCH 1/3] arm64: tegra: Add current monitors for Jetson Xavier
Quoted 14 lines · Jon Hunter
Add the INA3221 current monitors that are present on the Jetson AGX Xavier and Jetson Xavier NX boards.
Signed-off-by Jon Hunter <[email protected]>--- .../arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 50 +++++++++++++++++++ .../arm64/boot/dts/nvidia/tegra194-p3668.dtsi | 27 ++++++++++ 2 files changed, 77 insertions(+)arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi +0
-0
arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi memory-controller@2c00000 { · line 59
Quoted 7 lines
arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi +4
-0@@ -53,6 +53,56 @@ memory-controller@2c00000 { status = "okay"; }; + i2c@c240000 { + status = "okay"; + + ina3221@40 {
power-sensor@
Node names should be generic. See also an explanation and list of examples (not exhaustive) in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
Best regards,
Krzysztof
Jon Hunter
maintainerRe: [PATCH 1/3] arm64: tegra: Add current monitors for Jetson Xavier
Quoted 26 lines · Krzysztof Kozlowski
Quoted 14 lines · Jon Hunter
Add the INA3221 current monitors that are present on the Jetson AGX Xavier and Jetson Xavier NX boards.
Signed-off-by Jon Hunter <[email protected]>--- .../arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 50 +++++++++++++++++++ .../arm64/boot/dts/nvidia/tegra194-p3668.dtsi | 27 ++++++++++ 2 files changed, 77 insertions(+)arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi +0
-0arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi memory-controller@2c00000 { · line 59
Quoted 7 lines
arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi +4
-0@@ -53,6 +53,56 @@ memory-controller@2c00000 { status = "okay"; }; + i2c@c240000 { + status = "okay"; + + ina3221@40 {power-sensor@
Quoted 3 lines
Node names should be generic. See also an explanation and list of examples (not exhaustive) in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
I will correct this.
Thanks
Jon
Signature · 1 line
nvpublic
Jon Hunter
maintainerPATCH 2/3 arm64: tegra: Add USB device support for Jetson AGX Xavier
In reply to Jon HunterEnable the USB device support for the Jetson AGX Xavier platform.
--- arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 8 ++++++++ 1 file changed, 8 insertions(+)
arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts +8 -0
@@ -2094,6 +2094,14 @@ usb3-3 { }; }; + usb@3550000 { + status = "okay"; + + phys = <&{/bus@0/padctl@3520000/pads/usb2/lanes/usb2-0}>, + <&{/bus@0/padctl@3520000/pads/usb3/lanes/usb3-2}>; + phy-names = "usb2-0", "usb3-0"; + }; + usb@3610000 { status = "okay";
Signature · 1 line
2.34.1
Jon Hunter
maintainerPATCH 3/3 arm64: tegra: Add USB Type-C controller for Jetson AGX Xavier
In reply to Jon HunterPopulate the Cypress USB Type-C controller for Tegra194 Jetson AGX Xavier board.
--- .../boot/dts/nvidia/tegra194-p2972-0000.dts | 43 ++++++++++++++++++- 1 file changed, 42 insertions(+), 1 deletion(-)
arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts +42 -1
@@ -2062,8 +2062,15 @@ usb3-3 { ports { usb2-0 { - mode = "host"; + mode = "otg"; + usb-role-switch; status = "okay"; + + port { + hs_typec_p0: endpoint { + remote-endpoint = <&hs_ucsi_ccg_p0>; + }; + }; }; usb2-1 {
@@ -2114,6 +2121,40 @@ usb@3610000 { phy-names = "usb2-0", "usb2-1", "usb2-3", "usb3-0", "usb3-2", "usb3-3"; }; + i2c@c240000 { + typec@8 { + compatible = "cypress,cypd4226"; + reg = <0x08>; + interrupt-parent = <&gpio_aon>; + interrupts = <TEGRA194_AON_GPIO(BB, 2) IRQ_TYPE_LEVEL_LOW>; + firmware-name = "nvidia,jetson-agx-xavier"; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + ccg_typec_con0: connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + label = "USB-C"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hs_ucsi_ccg_p0: endpoint { + remote-endpoint = <&hs_typec_p0>; + }; + }; + }; + }; + }; + }; + i2c@c250000 { status = "okay";
Signature · 1 line
2.34.1